标准号 |
中文名称 |
英文名称 |
| DIN IEC 61428-1999 |
核仪器装置.使用锗探测器的γ射线光谱测定法用样品容器 |
Nuclear instrumentation - Sample containers for gamma-ray spectrometry with Germanium detectors (IEC 61428:1998) |
| DIN IEC 61453-1999 |
核仪器.放射性核素分析用铊活性碘化钠测出系统.校正和使用法 |
Nuclear instrumentation - Thallium activated sodium iodide detector systems for assay of radionuclides - Calibration and usage (IEC 61453:1997) |
| DIN IEC 61513-2002 |
核电厂.对安全很重要的系统用仪器仪表和控制.系统的一般要求 |
Nuclear power plants - Instrumentation and control for systems important to safety - General requirements for systems (IEC 61513:2001) |
| DIN IEC 61513/A100-2005 |
核电厂.对安全重要的仪器仪表和控制系统.系统的一般要求.国家附录ND (资料性): 其他IEC标准的共同有效的规定 |
|
| DIN IEC 61577-2-2001 |
辐射防护装置.氡和氡衰减产品测量的装置.第2部分:氡测量装置的特殊要求 |
Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for radon measuring instruments (IEC 61577-2:2000) |
| DIN IEC 61577-3-2003 |
环保和辐射防护仪器装置.氡和氡降解产品的测量仪器.第3部分:氡降解产品的测量仪器的特殊要求 |
Environmental and radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments (IEC 61577-3:2002) |
| DIN IEC 61839-2002 |
核电厂.控制室的设计.功能分析和陈述 |
Nuclear power plants - Design of control-rooms - Functional analysis and assignment (IEC 61839:2000) |
| DIN IEC 61976-2001 |
核仪器装置.光谱测定法.HPGeγ射线光谱测定法中光谱底色的特性 |
Nuclear instrumentation - Spectrometry - Characterization of the spectrum background in HPGe gamma-ray spectrometry (IEC 61976:2000) |
| DIN IEC 62088-2002 |
核仪器装置.闪烁检测器用光电二极管.试验程序 |
Nuclear instrumentation - Photodiodes for scintillation detectors - Test procedures (IEC 62088:2001) |
| DIN IEC 62089-2003 |
核仪器仪表.α/β气体正比计数器的校准和使用 |
Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters (IEC 62089:2001) |
| DIN IEC 62117-2001 |
核电厂.压水堆(PWR).低温停机过程中堆芯充分冷却的监测 |
Nuclear power plants - Pressurized light water reactors - Monitoring adequate cooling within the core during cold shutdown (IEC 62117:1999) |
| DIN IEC 62138-2004 |
核电厂.设备和控制的安全重要性.执行B类或C类功能的计算机系统的软件情况 |
|
| DIN IEC 62198-2002 |
项目风险管理.应用导则 |
Project risk management - Application guidelines (IEC 62198:2001) |
| DIN IEC/TR 60887-2005 |
电灯用玻璃灯泡的名称与符号体系 |
|
| DIN IEC/TS 60034-17-2004 |
旋转电机.第17部分:变频供电的鼠笼式感应电动机.应用指南 |
(Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide (IEC/TS 60034-17:2002 + Corrigendum:2003)) |
| DIN IEC/TS 60034-17-2004 |
旋转电机.第17部分:变频供电的鼠笼式感应电动机.应用指南 |
|
| DIN IEC/TS 60034-18-41-2004 |
旋转电机.第18-41部分:由电压转换器馈电的旋转电机用电绝缘系统的评价和鉴定 |
|
| DIN IEC/TS 62370-2004 |
电声学.声音强度的测量仪器.电磁和静电兼容性要求和试验过程 |
|
| DIN ISO 10007-2004 |
质量管理体系.技术状态管理指南 |
|
| DIN ISO 10012-1-1992 |
测量工具质量保证的要求.测量工具的认证体系 |
Quality assurance requirements for measuring equipment; part 1: metrological confirmation system for measuring equipment; identical with ISO 10012-1:1992 |
| DIN ISO 10013-1996 |
编制质量手册规则 |
Guidelines for developing quality manuals (ISO 10013:1995) |
| DIN ISO 1002-1985 |
滚动轴承.飞机构架轴承.特性.外形尺寸.公差.额定静负荷 |
Rolling bearings; airframe bearings; characteristics, boundary dimensions, tolerances, static load ratings |
| DIN ISO 1004-1999 |
信息处理.磁性墨水字符识别.打印规范 |
Information processing - Magnetic ink character recognition - Print specifications (ISO 1004:1995) |
| DIN ISO 10045-1992 |
高山雪橇.紧固部位.试验螺钉的要求 |
Alpine skis; binding mounting area; requirements for test screws; identical with ISO 10045:1991 |
| DIN ISO 10069-1-2000 |
压力设备.合成橡胶压力弹簧.第1部分:总规范 |
Tools for pressing - Elastomer pressure springs - Part 1: General specification (ISO 10069-1:1991) |
| DIN ISO 10069-2-2000 |
压力设备.合成橡胶压力弹簧.第2部分:附件的规范 |
Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories (ISO 10069-2:1991) |
| DIN ISO 10071-1-2002 |
冲压工具.轻型球形锁仅冲床 |
Tools for pressing - Ball-lock punches - Part 1: Ball-lock punches for light duty (ISO 10071-1:2001) |
| DIN ISO 10073-1994 |
横压工具.支承柱 |
Tools for moulding; support pillars; identical with ISO 10073:1991 |
| DIN ISO 10076-2001 |
金属粉末.用液体中重力沉淀和衰减测量测定粒度分布(ISO 10076:1991) |
Metallic powders - Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement (ISO 10076:1991) |
| DIN ISO 1008-2000 |
摄影技术.相纸尺寸.图片纸 |
Photography - Paper dimensions - Pictorial sheets (ISO 1008:1992) |
| DIN ISO 1009-1993 |
摄影.相纸尺寸.印相机用卷纸 |
Photography; paper dimensions; rolls for printers; identical with ISO 1009:1992 |
| DIN ISO 1009-2003 |
摄影.相纸尺寸.印片机用卷纸 |
(Photography - Paper dimensions - Rolls for printers (ISO 1009:2000)) |
| DIN ISO 10109-1-1998 |
光学和光学仪器.环境要求.第1部分:基本信息.定义.气候区以及参数 |
Optics and optical instruments - Environmental requirements - Part 1: General information, definitions, climatic zones and their parameters (ISO 10109-1:1994) |
| DIN ISO 10109-11-2002 |
光学和光学仪器的环境要求.第11部分:户外条件下使用的光学仪器 |
Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use (ISO 10109-11:2001) |
| DIN ISO 10109-12-2005 |
光学和光学仪器.环境要求.第12部分:光学仪器的运输条件 |
|
| DIN ISO 10109-4-2002 |
光学和光学仪器.环境要求.第4部分:望远镜系统的试验要求 |
Optics and optical instruments - Environmental requirements - Part 4: Test requirements for telescopic systems (ISO 10109-4:2001) |
| DIN ISO 10109-6-1998 |
光学和光学仪器.环境要求.第6部分:医疗光学设备的试验要求 |
Optics and optical instruments - Environmental requirements - Part 6: Test requirements for medical optical devices (ISO 10109-6:1994) |
| DIN ISO 10109-7-2002 |
光学和光学仪器的环境要求.第7部分:光学测量系统的试验要求 |
Optics and optical instruments - Environmental requirements - Part 7: Test requirements for optical measuring systems (ISO 10109-7:2001) |
| DIN ISO 10109-8-1998 |
光学和光学仪器.环境要求.第8部分:极限使用条件的试验要求 |
Optics and optical instruments - Environmental requirements - Part 8: Test requirements for extreme conditions of use (ISO 10109-8:1994) |
| DIN ISO 10110 Bb.1-2000 |
光学及光学仪器.光学件和系统的图形制备.DIN ISO 10110与DIN 3140的对照.索引 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Comparison DIN ISO 10110 - DIN 3140; index |
| DIN ISO 10110 Bb.2-2000 |
光学及光学仪器.光学件和系统的图形制备.图例 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Examples of drawings |
| DIN ISO 10110-1-2000 |
光学及光学仪器.光学件和系统的图形制备.第1部分:总则 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 1: General (ISO 10110-1:1996) |
| DIN ISO 10110-10-2000 |
光学及光学仪器.光学件和系统的图形制备.第10部分:透镜片的表示数据表用数据 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 10: Table representing data of a lens element (ISO 10110-10:1996) |
| DIN ISO 10110-10-2004 |
光学和光子学.光学件和系统图形制备.第10部分:光学件和粘结组件的数据表 |
|
| DIN ISO 10110-11-2000 |
光学及光学仪器.光学件和系统的图形制备.第11部分:非公差数据 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data (ISO 10110-11:1996) |
| DIN ISO 10110-12-2000 |
光学及光学仪器.光学件和系统的图形制备.第12部分:非球面形表面 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 12: Aspheric surfaces (ISO 10110-12:1997) |
| DIN ISO 10110-14-2004 |
光学及光学仪器.光学件和系统的图形制备.第14部分:波阵面变形公差 |
(Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance (ISO 10110-14:2003)) |
| DIN ISO 10110-14-2004 |
光学及光学仪器.光学件和系统的图形制备.第14部分:波阵面变形公差 |
|
| DIN ISO 10110-17-2004 |
光学和光子学.光学件和系统制图准备.第17部分:激光辐照损伤阈 |
|
| DIN ISO 10110-2-2000 |
光学及光学仪器.光学件和系统的图形制备.第2部分:材料不完全性.应力双折射 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 2: Material imperfections; stress birefringence (ISO 10110-2:1996) |
| DIN ISO 10110-3-2000 |
光学及光学仪器.光学件和系统的图形制备.第3部分:材料不完全性.气泡和杂质 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 3: Material imperfections; bubbles and inclusions (ISO 10110-3:1996) |
| DIN ISO 10110-4-2000 |
光学及光学仪器.光学件和系统的图形制备.第4部分:不完备材料的不均匀性和擦痕 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 4: Material imperfections; inhomogenity and striae (ISO 10110-4:1997) |
| DIN ISO 10110-5 Bb.1-2003 |
光学及光学仪器.光学件和系统的图形制备.第5部分:表面形状公差.用检验镜检验表面形状公差 |
(Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances; Surface form tolerance inspection using testing glasses) |
| DIN ISO 10110-5-2000 |
光学及光学仪器.光学件和系统的图形制备.第5部分:表面形状公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances (ISO 10110-5:1996 + Technical Corrigendum 1:1996) |
| DIN ISO 10110-6-2000 |
光学及光学仪器.光学件和系统图形的制备.第6部分:定中心公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances (ISO 10110-6:1996) |
| DIN ISO 10110-7-2000 |
光学及光学仪器.光学件和系统的图形制备.第7部分:表面缺陷公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 7: Surface imperfection tolerances (ISO 10110-7:1996) |
| DIN ISO 10110-8-2000 |
光学及光学仪器.光学件和系统的图形制备.第7部分:表面特征 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 8: Surface texture (ISO 10110-8:1997) |
| DIN ISO 10110-9-2000 |
光学及光学仪器.光学件和系统的图形制备.第9部分:表面处理和覆层 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating (ISO 10110-9:1996) |
| DIN ISO 1012-2000 |
摄影术.一般用途的散片和胶卷.尺寸 |
Photography - Film in sheets and rolls for general use - Dimensions (ISO 1012:1998) |
| DIN ISO 102-1980 |
航空和航天.飞机.重力加油口 |
Aerospace; aircraft, gravity filling orifices |
| DIN ISO 10209-2-1994 |
技术产品文献处理.词汇.第2部分:有关投射方法的术语 |
Technical product documentation - Vocabulary - Part 2: Terms relating to projection methods; identical with ISO 10209-2:1993 |
| DIN ISO 10209-4-2000 |
技术产品文献.词汇.第4部分:与建筑文献有关的条目 |
Technical product documentation - Vocabulary - Part 4: Terms relating to construction documentation (ISO 10209-4:1999) |
| DIN ISO 1021-1983 |
航空和航天.飞机上发动机舱灭火器孔和门 |
Aircraft; engine nacelle fire extinguisher apertures and doors |
| DIN ISO 10214-1994 |
摄影术.经处理过的摄影材料.储存用盒 |
Photography - Processed photographic materials - Filling enclosures for storage; identical with ISO 10214:1991 |
| DIN ISO 10223-1994 |
纺织机械.平经编织机.导向杆标准号 |
Textile machinery - Flat warp knitting machines - Numbering of guide bars; identical with ISO 10223:1992 |
| DIN ISO 10228-1995 |
越野滑雪橇.捆绑接合面.试验螺钉的要求 |
Cross-country skis - Binding mounting area - Requirements for test screws; identical with ISO 10228:1991 |
| DIN ISO 10242-1-2000 |
压力设备.凸模夹持器柄.第1部分:A型 |
Tools for pressing - Punch holder shanks - Part 1: Type A (ISO 10242-1:1998) |
| DIN ISO 10242-2-2000 |
压力设备.凸模夹持器柄.第2部分:C型 |
Tools for pressing - Punch holder shanks - Part 2: Type C (ISO 10242-2:1991) |
| DIN ISO 10243-1993 |
冲压工具.矩形截面压力弹簧.安装尺寸和颜色编码 |
Tools for pressing; compression springs with rectangular section; housing dimensions and colour coding; identical with ISO 10243:1991 |
| DIN ISO 10285-1994 |
滚动轴承.线性运动.循环滚珠.套筒型.米制系列 |
Rolling bearings; linear motion, recirculating ball, sleeve type; metric series; identical with ISO 10285:1992 |
| DIN ISO 10315-2000 |
卷烟.烟雾冷凝物中尼古丁的测定.气相色谱法 |
(Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic method (ISO 10315:2000)) |
| DIN ISO 10330-1996 |
摄影技术.同步闪光器.摄影机和闪光装置点燃电路和连接器.电特性及其试验方法 |
(Photography - Synchronizers, ignition circuits and connectors for cameras and photoflash units - Electrical characteristics and test methods (ISO 10330:1992)) |
| DIN ISO 1034-1980 |
航空和航天.飞机用地面空气调节连接装置 |
(Aerospace; aircraft, ground air conditioning connections) |
| DIN ISO 1036-1985 |
纺织机械.染整机.左.右侧的定义 |
(Textile machinery; dyeing and finishing machines; definition of left and right sides; identical with ISO 1036, edition 1984) |
| DIN ISO 10362-1-2000 |
卷烟.烟雾凝聚物中水分的测定.第1部分:气相色谱法 |
(Cigarettes - Determination of water in smoke condensates - Part 1: Gas-chromatographic method (ISO 10362-1:1999)) |
| DIN ISO 10362-2-1995 |
卷烟.烟雾凝聚物中水分的测定.第2部分:卡尔.费歇尔法 |
(Cigarettes - Determination of water in smoke condensates - Part 2: Karl Fischer method; identical with ISO 10362-2:1994) |
| DIN ISO 10374-1996 |
货运集装箱.自动识别符 |
(Freight containers - Automatic identification (ISO 10374:1991 + AMD 1:1995)) |
| DIN ISO 10381-1-2003 |
土质.取样.第1部分:取样方法的设计指南 |
(Soil quality - Sampling - Part 1: Guidance on the design of sampling programmes (ISO 10381-1:2002)) |
| DIN ISO 10381-2-2003 |
土质.取样.第2部分:取样方法指南 |
(Soil quality - Sampling - Part 2: Guidance on sampling techniques (ISO 10381-2:2002)) |
| DIN ISO 10381-3-2002 |
土质.取样.第3部分:安全性指南 |
(Soil quality - Sampling - Part 3: Guidance on safety (ISO 10381-3:2001)) |
| DIN ISO 10381-4-2004 |
土壤质量.取样.第4部分:自然、近自然和种植区勘察程序指南 |
|
| DIN ISO 10381-6-1997 |
土质.取样.第6部分:试验室测定有氧微生物作用过程用土壤的取样,处理及存放的指南 |
(Soil quality - Sampling - Part 6: Guidance on the collection, handling and storage of soil for the assessment of aerobic microbial processes in the laboratory (ISO 10381-6:1993)) |
| DIN ISO 10382-2003 |
土壤质量.有机氯农药和多氯化联苯的测定.电子俘获探测气相色谱法 |
(Soil quality - Determination of organochlorine pesticides and polychlorinated biphenyls - Gas-chromatographic method with electron capture detection (ISO 10382:2002)) |
| DIN ISO 10390-1997 |
土壤质量.pH值测定 |
(Soil quality - Determination of pH (ISO 10390:1994)) |
| DIN ISO 10390-2005 |
土壤质量.pH值测定 |
|
| DIN ISO 10444-1996 |
信息和文献.研究报告用国际标准号码(ISRN) |
Information and documentation - International standard technical report number (ISRN) (ISO 10444:1994) |
| DIN ISO 10447-1994 |
焊接.点焊.凸焊和有缝焊的剥离和凿剥离试验 |
Welding - Peel and chisel testing of resistance spot, projection and seam welds; identical with ISO 10447:1991 |
| DIN ISO 10448-1999 |
农用拖拉机.器具用液压传动 |
Agricultural tractors - Hydraulic pressure for implements (ISO 10448:1994) |
| DIN ISO 10457-1994 |
纺织机械.染色和整理机械.额定速度. |
Textile machinery; dyeing and finishing machines, nominal speeds; identical with ISO 10457:1991 |
| DIN ISO 10458-1995 |
纺织机械.与染色和精整机相关的绕线装置用方棒.尺寸 |
Textile machinery - Square bars for winding devices relating to dyeing and finishing machines - Dimensions (ISO 10458:1993) |
| DIN ISO 10459-1995 |
纺织机械.染色和精整设备.零件工作范围的名称与符号 |
Textile machinery - Dyeing and finishing machines - Designation of operating ranges of component parts (ISO 10459:1992) |
| DIN ISO 10473-2002 |
滤膜介质上颗粒物质质量测量.β-射线吸收法 |
Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000) |
| DIN ISO 10486-1993 |
客车.客车无线电设备识别号(CRIN) |
Passenger cars; car radio identification number (CRIN); identical with ISO 10486:1992 |
| DIN ISO 10502-1997 |
航空和航天.温度为230℃以下,气压为10500KPa时使用的聚四氟乙烯(PTFE)软管.交货技术条件 |
Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 C and 10500 kPa - Procurement specification (ISO 10502:1992) |
| DIN ISO 10531-2000 |
包装.完全和满装的运输包装.成组装运稳定性试验 |
Packaging - Complete, filled transport packages - Stability testing of unit loads (ISO 10531:1992) |
| DIN ISO 1055-1983 |
锌和锌合金.铁含量的测定.分光光度法 |
Zinc and zinc alloys; determination of iron content; spectrophotometric method |
| DIN ISO 10566-1999 |
水质.铝测定.用邻苯二酚紫的光谱测定法 |
Water quality - Determination of aluminium - Spectrometric method using pyrocatechol violett |
| DIN ISO 10578-1994 |
技术制图.定向和定位公差.投影的公差带 |
Technical drawings; tolerancing of orientation and of location; projected tolerance zone; identical with ISO 10578:1992 |
| DIN ISO 10583-1998 |
航空和航天.流体系统.管螺纹的检验方法 |
Aerospace fluid systems - Test methods for tube/fitting assemblies (ISO 10583:1993) |
| DIN ISO 10599-1-1993 |
汽车收音机.同轴天线连接器.尺寸 |
Car radios; coaxial aerial connectors; dimensions; identical with ISO 10599-1:1992 |
| DIN ISO 10602-2000 |
摄影.处理的银胶质类型黑白胶片.稳定性规范 |
Photography - Processed silver-gelatin type black-and-white film - Specifications for stability (ISO 10602:1995) |
| DIN ISO 10625-1999 |
农业机械和拖拉机.农作物保护设备.喷嘴的识别色码 |
Agricultural machinery and tractors - Crop protection equipment - Sprayer nozzles; colour coding for identification (ISO 10625:1996) |
| DIN ISO 10627-1-1999 |
农业机械和拖拉机.农作物防护设备.第1部分:设备的说明书 |
Agricultural machinery and tractors - Agricultural sprayers - Part 1: Data sheet for machines (ISO 10627-1:1992) |
| DIN ISO 10627-2-1999 |
农业机械和拖拉机.农作物防护设备.第2部分:部件的说明书 |
Agricultural machinery and tractors - Hydraulic agricultural sprayers - Part 2: Data sheets for components (ISO 10627-2:1992) |
| DIN ISO 10693-1997 |
土质.碳酸盐含量的测定.容量分析法 |
Soil quality - Determination of carbonate content - Volumetric method (ISO 10693:1995) |
| DIN ISO 10694-1996 |
土壤质量.干燃烧后(素分析法)对有机物质和碳含量的测定 |
Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis) (ISO 10694:1995) |
| DIN ISO 10727-2004 |
茶叶和固体速溶茶.咖啡因含量的测定.高效液相色谱法 |
|
| DIN ISO 10763-2004 |
液压传动.端面平齐的无缝和焊接型精密钢管.尺寸和标称工作压力 |
|
| DIN ISO 10766-1998 |
液压传动系统,液压缸.活塞和连杆用矩形截面轴承环安装区域的尺寸 |
Hydraulic fluid power, cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods (ISO 10766:1996) |
| DIN ISO 10782-1-1999 |
纺织加工的监测和控制用数据单的定义与特性.第1部分:纺纱、纺纱准备及相关工艺 |
Definitions and attributes of data elements for control and monitoring of textile processes - Part 1: Spinning, spinning preparatory and related processes (ISO 10782-1:1998) |
| DIN ISO 10787-1-1998 |
纺织机械及附件.综框.第1部分:通过导轨支架把综丝杆固定在综丝铁条上.协调尺寸 |
Textile machinery and accessories - Heald frames - Part 1: Heald-carrying rod fixed to the frame stave by rod support; coordinated dimensions (ISO 10787-1:1994) |
| DIN ISO 10787-2-1998 |
纺织机械及附件.综框.第2部分:能直接把综丝杆固定在综光铁条上.协调尺寸 |
Textile machinery and accessories - Heald frames - Part 2: Heald-carrying rod fixed directly on the frame stave - Coordinated dimensions (ISO 10787-2:1994) |
| DIN ISO 10787-3-1998 |
纺织机械及附件.综框.第3部分:综框用导向套筒 |
Textile machinery and accessories - Heald frames - Part 3: Guides for heald frames (ISO 10787-3:1994) |
| DIN ISO 10791-1-2001 |
机床.组合加工中心机床的试验条件.第1部分:带水平主轴和附属头的机器的几何试验(水平Z轴)(ISO 10791-1:1999) |
Machine tools - Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis) ( ISO 10791-1:1999) |
| DIN ISO 10791-3-2001 |
机床.组合加工中心机床的试验条件.第3部分:带完整刻度的或连续通用头的机器的几何试验(垂直Z轴)(ISO 10791-3:1998) |
Machine tools - Test conditions of machining centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis) (ISO 10791-3:1998) |
| DIN ISO 10791-4-2001 |
机床.组合加工中心机床的试验条件.第4部分:直线型和旋转轴的定位的准确度和复现性(ISO 10791-4:1998) |
Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998) |
| DIN ISO 10791-7-2001 |
机床.组合加工中心机床的试验条件.第7部分:完工试样的准确度(ISO 10791-7:1998) |
Machine tools - Test conditions for machining centres - Part 7: Accuracy of a finished test piece (ISO 10791-7:1998) |
| DIN ISO 10792-2-1996 |
航空航天.带自动润滑层的耐腐蚀钢制飞机机架用球面滑动轴承.第2部分:英制系列 |
Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series; identical with ISO 10792-2:1995 |
| DIN ISO 10792-3-1996 |
航空航天.带自动润滑层的耐腐蚀钢制飞机机架用球面滑动轴承.第3部分:交货技术条件 |
Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification; identical with ISO 10792-3:1995 |
| DIN ISO 108-1978 |
纺织机械和辅助装置.织机.左右侧的定义 |
Textile Machinery and Accessories; Weaving Looms, Definition of Left and Right Sides |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com