标准号 |
中文名称 |
英文名称 |
| DIN EN 2018-1995 |
航空和航天.航空轴承.单列钢制球面轴承.直径系列3和4.尺寸和负荷.不适于新结构 |
(Aerospace - Bearings-airframe rolling, single row self aligning roller bearings in steel; diameter series 3 and 4 - Dimensions and loads; inactive for new design; German version EN 2018:1984) |
| DIN EN 20187-1993 |
纸、纸板和纸浆.调节和检验用的标准环境气候条件及监测气候条件和调节试样的方法 |
(Paper, board and pulps; standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990); German version EN 20187:1993) |
| DIN EN 2020-1995 |
航空和航天.航空轴承.单列耐蚀钢制球面轴承.直径系列3和4.尺寸和负荷.不适于新结构 |
(Aerospace - Bearings-airframe rolling, single row self aligning roller bearings in corrosion resisting steel; diameter series 3 and 4 - Dimensions and loads; inactive for new design; German version EN 2020:1984) |
| DIN EN 2022-1989 |
航空和航天.本身带润滑层的不锈钢滑动轴承.轻系列.尺寸和负荷 |
(Aerospace; bearings, spherical plain, in corrosion resisting steel, with self-lubricating liner, light series; dimensions and loads) |
| DIN EN 20225-1992 |
紧固件.螺钉和螺母.标注尺寸(ISO225-83) |
(Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensions (ISO 225:1983); german version EN 20225:1991) |
| DIN EN 2023-1989 |
航空和航天.本身带润滑层的不锈钢滑动轴承.常规系列.尺寸和负荷 |
(Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liner, normal series; dimensions and loads) |
| DIN EN 20273-1992 |
紧固件.螺钉用通孔(ISO273-79) |
(Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991) |
| DIN EN 20284-1993 |
输送机皮带.电导率.规范和试验方法 |
(Conveyor belts; electrical conductivity; specification and method of test (ISO 284:1982); German version EN 20284:1993) |
| DIN EN 20287-1994 |
纸和纸板.水份含量的测定.烘干法 |
(Paper and board - Determination of moisture content - Oven-drying method (ISO 287:1985); German version EN 20287:1994) |
| DIN EN 203-1-1996 |
大型燃气炊事用具.第1部分:安全性的一般规定 |
(Gas heated catering equipment - Part 1: Safety requirements (includes Amendment A1:1995); German version EN 203-1:1992 + A1:1995) |
| DIN EN 203-1-2005 |
气体加热的给养设备.第1部分:一般安全规范 |
|
| DIN EN 203-1/A2-1999 |
大型燃气炊事用具.第1部分:安全性要求.修改件A2 |
(Gas heated catering equipment - Part 1: Safety requirements; Amendment A2; German version EN 203-1:1992/A2:1999) |
| DIN EN 203-2-1995 |
用气体燃料的大型厨房器具.第2部分:合理使用能源 |
(Gas heated catering equipment - Part 2: Rational use of energy; German version EN 203-2:1995) |
| DIN EN 2032-1-2003 |
航空航天系列.金属材料.第1部分:常规命称与符号 |
(Aerospace series - Metallic materials - Part 1: Conventional designation; German and English version EN 2032-1:2001) |
| DIN EN 2032-2-1994 |
航空和航天.金属材料.第2部分:供货状态下经热处理的标记字母 |
(Aerospace series; metallic materials; part 2: coding of metallurgical condition in delivery condition; German version EN 2032-2:1994) |
| DIN EN 20340-1993 |
阻燃输送机皮带.要求和试验方法 |
(Conveyor belts; flame retardation; specifications and test method (ISO 340:1988); German version EN 20340:1993) |
| DIN EN 20354-1993 |
声学.混响室中声音的吸收测量 |
(Acoustics; measurement of sound absorption in a reverberation room (ISO 354:1985); German version EN 20354:1993) |
| DIN EN 20354/A1-1997 |
声学.混响室中声音的吸收测量.修订件1:声音吸收试验用试样安装 |
(Acoustics - Measurement of sound absorption in a reverberation room; Amendment A1: Test specimen mountings for sound absorption tests (ISO 354:1985/AMD 1:1997); German version EN 20354/A1:1997) |
| DIN EN 204-2001 |
非承重构件粘接热塑木胶粘剂的分类.德文版本EN204-2001 |
(Classification of thermoplastic wood adhesives for non-structural applications; German version EN 204:2001) |
| DIN EN 2044-2003 |
航空航天系列.公差等级h11、直径4mmD63mm的铝及铝合金拉制圆棒材.尺寸 |
(Aerospace series - Round bars, drawn, in aluminium and aluminium alloys, tolerance class h11, diameter 4 mmD63 mm - Dimensions; German and English version EN 2044:2001) |
| DIN EN 2045-2003 |
航空航天系列.公差等级h11、厚度6mma50mm的铝及铝合金拉制方棒.尺寸 |
(Aerospace series - Square bars, drawn, in aluminium and aluminium alloys, tolerance class h11, thickness 6 mma50 mm - Dimensions; German and English version EN 2045:2001) |
| DIN EN 2046-2003 |
航空航天系列.公差等级h11.对边宽度7mma50mm的铝及铝合金拉制六角形棒材.尺寸 |
(Aerospace series - Hexagonal bars, drawn, in aluminium and aluminium alloys, tolerance class h11, width across flats 7 mma50 mm - Dimensions; German and English version EN 2046:2001) |
| DIN EN 205-2003 |
胶粘剂.非结构上用木材胶粘剂.搭接接头的抗拉伸剪切强度的测定 |
(Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints; German version EN 205:2003) |
| DIN EN 20534-1993 |
纸和纸板.厚度和表观松密度或表观板密度的测定 |
(Paper and board; determination of thickness and apparent bulk density or apparent sheet density (ISO 534:1988); German version EN 20534:1993) |
| DIN EN 20535-1994 |
纸和纸板.水吸收性测定.Cobb法 |
(Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:1991); German version EN 20535:1994) |
| DIN EN 20594-1 Berichtigung 1-1996 |
对DINEN20594-1:1995-01的校正 |
(Corrigenda to DIN EN 20594-1:1995-01 (EN 20594-1:1993/AC:1996)) |
| DIN EN 20594-1-1995 |
注射器、针头和某些其它医用设备的有6%锥度的锥形配件.第1部分:一般要求 |
(Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986); German version EN 20594-1:1993) |
| DIN EN 206-1-2001 |
混凝土.第1部分:规范,性能,生产和一致性 |
(Concrete - Part 1: Specification, performance, production and conformity; German version EN 206-1:2000) |
| DIN EN 206-1/A1-2004 |
混凝土.第1部分:规范、性能、生产及合格性 |
|
| DIN EN 2063-1995 |
航空和航天.飞机机身用的滚动轴承.交货技术条件.不适于新结构 |
(Aeorspace series - Airframe rolling bearings - Technical specification; inactive for new design; German version EN 2063:1992) |
| DIN EN 20638-1993 |
纸浆.干物质含量的测定 |
(Pulps; determination of dry matter content (ISO 638:1978); German version EN 20638:1993) |
| DIN EN 2064-1992 |
航空和航天.带自动润滑层的不锈钢关节轴承.交货技术条件 |
(Aerospace series; bearings spherical plain in corrosion resisting steel with self lubricating liner; technical specification; german version EN 2064:1992) |
| DIN EN 2066-2003 |
航空航天系列.铝合金挤压型材.一般公差 |
(Aerospace series - Extruded section in aluminium alloys - General tolerances; German and English version EN 2066:2001) |
| DIN EN 2067-1996 |
航空和航天.带自动调心球轴承的吊环端头.交货技术条件 |
(Aerospace series - Rod ends with self-aligning ball bearings - Technical specification; German version EN 2067:1996) |
| DIN EN 2068-1996 |
航空和航天.带关节轴承和自润滑涂层的吊环端头.交货技术条件 |
(Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification; German version EN 2068:1996) |
| DIN EN 207-2002 |
人眼防护.防激光辐射过滤器和眼镜保护装置(激光防护镜) |
(Personal eye-protection - Filters and eye-protection against laser radiation (laser eye-protectors) (includes amendment A1:2002); German version EN 207:1998 + A1:2002) |
| DIN EN 2070-1-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第1部分:一般要求 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements; german version EN 2070-1:1989) |
| DIN EN 2070-1/A1-1993 |
航空和航天.铝和可锻铝合金制品.交货技术条件.第1部分:一般要求 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements; German version EN 2070-1/A1:1993; amendment 1) |
| DIN EN 2070-2-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第2部分:薄板.带材.型材和板材 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 2: sheet, strip formed profiles and plate; german version EN 2070-2:1989) |
| DIN EN 2070-3-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第3部分:棒材和压制型材 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 3: bar and section; german version EN 2070-3:1989) |
| DIN EN 2070-4-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第4部分:结构管材 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 4: tube for structures; german version EN 2070-4:1989) |
| DIN EN 2070-5-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第5部分:内压管 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 5: tube used under pressure; german version EN 2070-5:1989) |
| DIN EN 2070-6-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第6部分:铆钉用丝材 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 6: rivet wire; german version EN 2070-6:1989) |
| DIN EN 2070-7-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第7部分:初锻制坯料 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 7: wrought forging stock; german version EN 2070-7:1989) |
| DIN EN 2071-2003 |
航空航天系列.厚度0.25mma6mm的铝及铝合金薄板.尺寸 |
(Aerospace series - Sheets in aluminium and aluminium alloys, thickness 0,25 mma6 mm - Dimensions; German and English version EN 2071:2001) |
| DIN EN 2076-1-1990 |
航空和航天.铝.镁合金铸件和铸锭.交货技术要求.第1部分:一般要求 |
(Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements; german version EN 2076-1:1989) |
| DIN EN 2076-1/A1-1993 |
航空和航天.铝合金和镁合金锭块和铸件.交货技术条件.第1部分:一般要求 |
(Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements; German version EN 2076-1/A1:1993; amendment 1) |
| DIN EN 2076-2-1990 |
航空和航天.铝.镁合金铸件和铸锭.交货技术条件.第2部分:再熔炼用铸锭 |
(Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 2: ingots for remelting; german version EN 2076-2:1989) |
| DIN EN 2076-3-1990 |
航空和航天.铝.镁合金铸件和铸锭.交货技术条件.第3部分:试制铸件和连铸件 |
(Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 3: pre-production and production castings; german version EN 2076-3:1989) |
| DIN EN 2078-2003 |
航空航天系列.金属材料.生产图表、检验图表、检验和试验报告;定义、一般原理、制备和批准 |
(Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report; Definition, general principles, preparation and approval; German and English version EN 2078:2001) |
| DIN EN 2079-1995 |
航空和航天.用于仪器仪表带耐蚀钢法兰的精密球轴承.尺寸和负载 |
(Aerospace series - Bearings, precision ball, with flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads; German version EN 2079:1995) |
| DIN EN 208-2002 |
人眼防护.在激光器和激光系统上作校准工作用的眼镜防护装置(激光校准镜) |
(Personal eye-protection - Eye-protectors for adjustment work on lasers and lasersystems (laser adjustment eye-protectors) (includes amendment A1:2002); German version EN 208:1998 + A1:2002) |
| DIN EN 20811-1992 |
纺织品.耐水渗透性的测定.静水压试验 |
(Textiles fabrics; determination of resistance to water penetration; hydrostatic pressure test (ISO 811:1981); german version EN 20811:1992) |
| DIN EN 2082-1-1990 |
航空和航天.铝合金锻造预制材料和锻造件.交货技术条件.第1部分:一般要求 |
(Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements; german version EN 2082-1:1989) |
| DIN EN 2082-1/A1-1993 |
航空和航天.铝合金锻坯和锻件.交货技术条件.第1部分:一般要求 |
(Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements; German version EN 2082-1/A1:1993; amendment 1) |
| DIN EN 2082-2-1990 |
航空和航天.铝合金锻造预制材料和锻造件.交货技术条件.第2部分:锻造预制材料 |
(Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 2: forging stock; german version EN 2082-2:1989) |
| DIN EN 2082-3-1990 |
航空和航天.铝合金锻造预制材料和锻造件.交货技术条件.第3部分:试制件和连续锻造件 |
(Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 3: preproduction and production forgings; german version EN 2082-3:1989) |
| DIN EN 2083-2001 |
航空航天系列.电缆用铜或铜合金导体.产品标准.德文版EN2083-2001 |
(Aerospace series - Copper or copper alloys conductors for electrical cables - Product standard; German version EN 2083:2001) |
| DIN EN 20865-1992 |
凸焊机面上的T型槽(ISO865-81) |
(Slots in platens for projection welding machines (ISO 865:1981); german version EN 20865:1991) |
| DIN EN 2089-1994 |
航空和航天.AL-P2014A-T6和T62铝合金.薄板和带材.0.4mm |
(Aerospace series; aluminium alloy AL-P2014A-T6 or T62; sheet and strip; 0,4 mma6 mm; German version EN 2089-1994) |
| DIN EN 20898-2-1994 |
紧固件的机械性能.第2部分:有规定的检验载荷值的螺母.粗牙螺纹 |
(Mechanical properties of fasteners; part 2: nuts with specified proof load values; coarse thread (ISO 898-2:1992); German version EN 20898-2:1993) |
| DIN EN 20898-7-1995 |
紧固件的机械性能.第7部分:公称直径1mm至10mm的螺栓和螺钉的扭力试验和最小扭矩 |
(Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995) |
| DIN EN 209-2000 |
钢筒.最小容量为209L的带活动盖的筒.德语版EN209:1999 |
(Steel drums - Removable head (open head) drums with a minimum capacity of 210 l; German version EN 209:1999) |
| DIN EN 2093-1993 |
航空和航天.AL-P709-T74铝合金.20mm≤a≤150mm.自由锻件. |
(Aerospace series; aluminium alloy AL-P7009-T74; hand forgings 20 mma150 mm; German version EN 2093:1992) |
| DIN EN 2094-1993 |
航空和航天.AL-P7009-T74铝合金.3mm≤a≤150mm模锻件 |
(Aerospace series; aluminium alloy AL-P7009-T74; die forgings 3 mma150 mm; German version EN 2094:1992) |
| DIN EN 21-1990 |
木材防腐剂.通过幼虫转化对家具窃蠹毒值的测定(实验室法) |
(Wood preservatives; determination of toxic values against Anobium punctatum (De Geer) by larval transfer (laboratory method); german version EN 21:1988) |
| DIN EN 210-2000 |
钢筒.最小总容量为216.5L的带有密封盖的筒.德语版EN210:1999 |
(Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 216,5 l; German version EN 210:1999) |
| DIN EN 2100-1992 |
航空和航天.AL-P2014A-T4511铝合金.挤压棒材和型材a或D≤200mm |
(Aerospace series; aluminium alloy AL-P2014A-T4511; extruded bars and sections a or D200 mm; german version EN 2100:1992) |
| DIN EN 2101-1991 |
航空和航天.铝和锻铝合金的铬酸阳极氧化 |
(Aerospace series; chromic acid anodizing of aluminium and wrought aluminium alloys; german version EN 2101:1991) |
| DIN EN 2103-1-1991 |
航空和航天.钢.镍基合金以及钴基合金预制材料和铸件.交货技术条件.第1部分:一般要求 |
(Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 1: general requirements; german version EN 2103-1:1991) |
| DIN EN 2103-2-1991 |
航空和航天.钢.镍基合金以及钴基合金预制材料和铸件.交货技术条件.第2部分:预制材料 |
(Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 2: remelting stock; german version EN 2103-2:1991) |
| DIN EN 2103-3-1991 |
航空和航天.钢.镍基合金以及钴基合金预制材料和铸件.交货技术条件.第3部分:试制铸件和批生产铸件 |
(Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 3: pre-production and production castings; german version EN 2103-3:1991) |
| DIN EN 2104-1996 |
航空和航天.丙烯腈-丁二烯-橡胶(NBR).硬度:40IRHD |
(Aerospace series - Acrylonitrile-butadiene elastomer (NBR) - Hardness 40 IRHD; German version EN 2104:1996) |
| DIN EN 212-2003 |
木材防腐剂.木材防腐剂和经过防腐处理的木材分析用取样和制备的一般指南 |
(Wood preservatives - General guidance on sampling and preparation for analysis of wood preservatives and treated timber; German version EN 212:2003) |
| DIN EN 2122-1996 |
航空和航天.阳极处理和铬酸钝化的铝合金平垫圈 |
(Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated; German version EN 2122:1996) |
| DIN EN 2126-1993 |
航空和航天.AL-P7075-T651铝合金.6mm∠a≤800mm板材 |
(Aerospace series; aluminium alloy AL-P7075-T651; plate 6 mma80 mm; German version EN 2126:1992) |
| DIN EN 2127-1993 |
航空和航天.AL-P7075-T73511铝合金.a或D≤100mm的挤压棒材和型材 |
(Aerospace series; aluminium alloy AL-P7075-T73511; extruded bars and sections a or D100 mm; German version EN 2127:1992) |
| DIN EN 2128-1993 |
航空和航天.AL-P7075-T73511铝合金.6mm≤a或D≤75mm拉制棒材 |
(Aerospace series; aluminium alloy AL-P7075-T73511; drawn bars 6 mma or D75 mm; German version EN 2128:1992) |
| DIN EN 2130-2002 |
航空航天系列.仪器和设备用耐腐蚀钢的轴承、精密滚珠轴承.技术规范 |
(Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification; German version EN 2130:2001) |
| DIN EN 2131-2003 |
航空航天系列.厚度6mma160mm的铝合金板.尺寸 |
(Aerospace series - Plates in aluminium alloys, thickness 6 mma160 mm - Dimensions; German and English version EN 2131:2001) |
| DIN EN 2133-1998 |
航空和航天.抗拉强度≤1450MPa的钢,铜,铜合金以及镍合金的镀镉 |
(Aerospace series - Cadmium plating of steels with specified tensile strength1450 MPa, copper, copper alloys and nickel alloys; German version EN 2133:1997) |
| DIN EN 2134-2003 |
航空航天系列.直径10mmD220mm的铝及铝合金挤压圆棒.尺寸 |
(Aerospace series - Round bars, extruded in aluminium and aluminium alloys, diameter 10 mmD220 mm - Dimensions; German and English version EN 2134:2001) |
| DIN EN 2138-2000 |
航空和航天系列.扁形镀镉钢垫圈 |
(Aerospace series - Washers, flat, in steel, cadmium plated; German version EN 2138:1999) |
| DIN EN 2139-1989 |
航空和航天.耐高温钢垫圈 |
(Aerospace; washers, flat, heat resisting steel; german version EN 2139:1989) |
| DIN EN 2143-1993 |
航空和航天.英寸系列1050A铝制一般头实心铆钉 |
(Aerospace series; rivets, solid, universal head, in aluminium 1050A, inch based series; german version EN 2143:1992) |
| DIN EN 2144-1994 |
航空和航天.英制系列铝合金2117通用头全铆钉 |
(Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, inch based series; German version EN 2144:1994) |
| DIN EN 2145-1994 |
航空和航天.英制系列阳极氧化或铬酸钝化铝合金制2117通用头全铆钉 |
(Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series; German version EN 2145:1994) |
| DIN EN 2146-1993 |
航空和航天.英寸系列2017A铝合金一般头实心铆钉 |
(Aerospace series; rivets, solid, universal head, in aluminium alloy 2017A, inch based series; german version EN 2146:1992) |
| DIN EN 2148-1993 |
航空和航天.英寸系列5056A铝合金一般头实心铆钉 |
(Aerospace series; rivets, solid, universal head, in aluminium alloy 5056A, inch based series; german version EN 2148:1992) |
| DIN EN 2149-1996 |
航空和航天.英寸系列5056A铝合金阳极氧化或铬酸钝化通用头实心铆钉 |
(Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, anodised or chromated, inch based series; German version EN 2149:1996) |
| DIN EN 215-1-1988 |
恒温散热气阀.要求和检验 |
(Thermostatic radiator valves; requirements and testing) |
| DIN EN 215-2004 |
恒温散热器阀.要求和试验方法 |
|
| DIN EN 21539-1993 |
信息技术.FORTRAN编程语言 |
(Information technology; programming languages; Fortran (ISO/IEC 1539:1991); english version EN 21539:1992) |
| DIN EN 2155-12-1997 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第12部分:线性热膨胀的测定 |
(Aerospace series - Test methods for transparent materials for aircraft glazing - Part 12: Determination of linear thermal expansion; German version EN 2155-12:1997) |
| DIN EN 2155-13-1993 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第13部分:负载弯曲时温度的测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 13: determination of temperature at deflection under load; German version EN 2155-13:1993) |
| DIN EN 2155-14-1993 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第14部分:1/10维卡特软化温度的测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 14: determination of the 1/10 vicat softening temperature; German version EN 2155-14:1993) |
| DIN EN 2155-19-1996 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第19部分:抗应力裂纹强度的测定 |
(Aerospace series - Test methods for transparent materials for aircraft glazing - Part 19: Determination of crace resistance; German version EN 2155-19:1996) |
| DIN EN 2155-2-1993 |
航空航天系列.飞行器门窗玻璃用透明材料的试验方法.第2部分:吸水率测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 2: determination of water absorption; german version EN 2155-2:1993) |
| DIN EN 2155-21-1989 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第21部分:裂纹扩张抗力的测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 21: determination of resistance to crack propagation (K-factor); german version EN 2155-21:1989) |
| DIN EN 2155-3-1993 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第3部分:折射率的测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 3: determination of refractive index; German version EN 2155-3:1993) |
| DIN EN 2155-5-1989 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第5部分:可见光传输测量 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 5: determination of visible light transmission; german version EN 2155-5:1989) |
| DIN EN 2155-7-1997 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第7部分:光偏移的测定 |
(Aerospace series - Test methods for transparent materials for aircraft glazing - Part 7: Determination of optical deviation; German version EN 2155-7:1997) |
| DIN EN 2155-8-1989 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第8部分:光学畸变的测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 8: determination of optical distortion; german version EN 2155-8:1989) |
| DIN EN 2155-9-1989 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第9部分:浊度测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 9: determination of haze; german version EN 2155-9:1989) |
| DIN EN 21560-1991 |
牙科学.牙医用汞 |
(Dentistry; dental mercury (ISO 1560:1985); german version EN 21560:1991) |
| DIN EN 21563-1992 |
藻酸盐牙印模材料(ISO1563-90) |
(Dental alginate impression material; german version EN 21563:1991) |
| DIN EN 2157-1-1993 |
航空航天.钢.锻坯和锻件.交货技术条件.第1部分:一般要求 |
(Aerospace series; steel; forging stock and forgings; technical specifications; part 1: general requirements; German version EN 2157-1:1993) |
| DIN EN 2157-2-1993 |
航空航天.钢.锻坯和锻件.交货技术条件.第2部分:锻坯 |
(Aerospace series; steel; forging stock and forgings; technical specification; part 2: forging stock; German version EN 2157-2:1993) |
| DIN EN 2157-3-1993 |
航空航天.钢.锻坯和锻件.交货技术条件.第3部分:预锻件和成批锻件 |
(Aerospace series; steel; forging stock and forgings; technical specification; part 3: pre-production and production forgings; German version EN 2157-3:1993) |
| DIN EN 21683-1994 |
声学.音响强度的优选参考量 |
(Acoustics - Preferred reference quantities for acoustic levels (ISO 1683:1983); German version EN 21683:1994) |
| DIN EN 21864-1994 |
信息处理.32,126和356次磁通变换/毫米(800,3200和9042次磁通变换/英寸)时数据交换用宽12.7毫米(0.5英寸)未 |
(Information technology; unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange; 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3200 ftpi) phase encoded and 356 ftpmm (9042 ftpi) NRZ1 (ISO/IEC 1864:1992); German version EN 21864:1993) |
| DIN EN 21942-1-1991 |
牙科术语.第1部分:一般及临床术语(ISO1942-1:1989) |
(Dental vocabulary; part 1: general and clinical terms (ISO 1942-1:1989); german version EN 21942-1:1991) |
| DIN EN 21942-2-1993 |
牙科学.术语.第2部分:牙科材料 |
(Dental vocabulary; part 2: dental materials (ISO 1942-2:1989); german version EN 21942-2:1992) |
| DIN EN 21942-3-1993 |
牙科学.词汇.第3部分:牙科器械 |
(Dental vocabulary; part 3: dental instruments (ISO 1942-3:1989); German version EN 21942-3:1993) |
| DIN EN 21942-4-1994 |
牙科词汇.第4部分:牙科设备 |
(Dental vocabulary; part 4: dental equipment (ISO 1942-4:1989); German version EN 21942-4:1993) |
| DIN EN 21974-1994 |
纸.抗扯裂的测定(埃尔门多夫Elmendorf扯裂试验法) |
(Paper and board - Determination of tearing resistance (Elmendorf method) (ISO 1974:1990); German version EN 21974:1994) |
| DIN EN 22-1975 |
木材防腐剂.对消灭家天牛的幼虫作用的测定(实验室法) |
(Wood Preservatives; Determination of Eradicant Action against Hylotrupes Bajulus (Linnaeus) Larvae (laboratory Method)) |
| DIN EN 22063-1994 |
金属涂层和其它无机物涂层.热喷镀.锌、铝、及其合金` |
(Metallic and other inorganic coatings - Thermal spraying - Zinc, aluminium and their alloys (ISO 2063:1991); German version EN 22063:1993) |
| DIN EN 22206-1993 |
包装.满装的运输包装.试验的包装件要素的标识 |
(Packaging; complete, filled transport packages; identification of parts when testing (ISO 2206:1987); german version EN 22206:1992) |
| DIN EN 22248-1993 |
包装.满装的运输包装.坠落冲击试验 |
(Packaging; complete, filled transport packages; vertical impact test by dropping (ISO 2248:1985); german version EN 22248:1992) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com