标准号 |
中文名称 |
英文名称 |
| DIN EN 140401-804-2005 |
详细规范:固定式低功率非线绕高稳定性表面安装电阻器.矩形.稳定性等级0.1和0.25 |
|
| DIN EN 140402-1999 |
空白详细规范.低容许负荷,可表面安装,导线绕制的固定电阻(SMD) |
(Blank detail specification: Fixed low power wire wound surface mounting (SMD) resistors; German version EN 140402:1998) |
| DIN EN 14041-2005 |
弹性、纺织和层压地板覆盖物.基本特性 |
|
| DIN EN 14042-2003 |
工作场所空气.暴露于化学和生物制剂的大气评定程序的应用和使用指南 |
(Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents; German version EN 14042:2003) |
| DIN EN 14045-2003 |
包装.在规定了合成条件的实际定向试验中包装材料分解的评定 |
(Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions; German version EN 14045:2003) |
| DIN EN 14046-2003 |
包装.组成条件受控的包装材料最大需氧生物降解能力的评定.二氧化碳释放分析的方法 |
(Packaging - Evaluation of the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide; German version EN 14046:2003) |
| DIN EN 14047-2003 |
包装.测定在气化介质中包装材料的最终氧化生物降解性.二氧化碳分析法 |
(Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide; German version EN 14047:2002) |
| DIN EN 14048-2003 |
包装.测定在气化介质中包装材料的最终氧化生物降解性.封闭式呼吸机氧量测量方法 |
(Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer; German version EN 14048:2002) |
| DIN EN 14049-2004 |
灌溉强度.计算原理和测量方法 |
(Water application intensity - Calculation principles and measurement methods; German version EN 14049:2003) |
| DIN EN 14049-2004 |
灌溉强度.计算原理和测量方法 |
|
| DIN EN 1405-1998 |
用于制备饮用水的产品.钠藻酸盐 |
(Chemicals used for treatment of water intended for human consumption - Sodium alginate; German version EN 1405:1998) |
| DIN EN 14053-2003 |
包装.瓦楞或实心纤维纸板制成的包装件 |
(Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction; German version EN 14053:2003) |
| DIN EN 14056-2003 |
实验室家具.设计和安装的建议 |
(Laboratory furniture - Recommendations for design and installation; German version EN 14056:2003) |
| DIN EN 14057-2003 |
铅和铅合金.废料.术语和定义 |
(Lead and lead alloys - Scrap - Terms and definitions; German version EN 14057:2003) |
| DIN EN 14058-2004 |
防护服.抵抗寒冷环境用防护服 |
|
| DIN EN 14059-2003 |
装饰油灯.安全和试验方法 |
(Decorative oil lamps - Safety requirements and test methods; German version EN 14059:2002) |
| DIN EN 1406-1998 |
用于制备饮用水的产品.改进浓度 |
(Chemicals used for treatment of water intended for human consumption - Modified starches; German version EN 1406:1998) |
| DIN EN 14063-1-2004 |
热绝缘材料和产品.现场成形膨胀粘土轻集料产品.第1部分:松填装产品的安装前规范 |
|
| DIN EN 14065-2003 |
纺织品.洗涤过的纺织品.生物污染控制系统 |
(Textiles - Laundry processed textiles - Biocontamination control system; German version EN 14065:2002) |
| DIN EN 14066-2003 |
天然石料试验方法.用热冲击法测定耐老化性 |
(Natural stone test methods - Determination of resistance to ageing by thermal shock; German version EN 14066:2003) |
| DIN EN 14067-1-2003 |
铁路设施.空气动力学.第1部分:符号和单位 |
(Railway applications - Aerodynamics - Part 1: Symbols and units; German version EN 14067-1:2003) |
| DIN EN 14067-2-2003 |
铁路设施.空气动力学.第2部分:通行线上的空气动力学 |
(Railway applications - Aerodynamics - Part 2: Aerodynamics on open track; German version EN 14067-2:2003) |
| DIN EN 14067-3-2003 |
铁路设施.空气动力学.第3部分:隧道里的空气动力学 |
(Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels; German version EN 14067-3:2003) |
| DIN EN 14068-2004 |
混凝土结构的防护和维修用产品和系统.试验方法.在混凝土中不移动的情况下注浆裂纹防水性的测定 |
|
| DIN EN 14069-2004 |
石灰浸物质.描述和最低要求 |
(Liming materials - Description and minimum requirements; German version EN 14069:2003) |
| DIN EN 14069-2004 |
石灰浸物质.描述和最低要求 |
|
| DIN EN 1407-1998 |
饮用水处理用化合物.阴离子的和非离子的聚丙烯酰胺 |
(Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides; German version EN 1407:1998) |
| DIN EN 14070-2004 |
机床安全.组合机床和专用机床 |
(Safety of machine tools - Transfer and special purpose machines; German version EN 14070:2003) |
| DIN EN 14070-2004 |
机床安全.组合机床和专用机床 |
|
| DIN EN 14071-2005 |
LPG罐用减压阀.辅助设备 |
|
| DIN EN 14072-2004 |
家具中的玻璃.试验方法 |
(Glass in furniture - Test methods; German version EN 14072:2003) |
| DIN EN 14072-2004 |
家具中的玻璃.试验方法 |
|
| DIN EN 14073-2-2004 |
办公室家具.储存家具.第2部分:安全要求 |
|
| DIN EN 14073-3-2004 |
办公室家具.储存家具.第3部分:结构稳定性和强度测定的试验方法 |
|
| DIN EN 14074-2004 |
办公室家具.工作台、办公桌和储存家具.移动部件的强度和耐用性测定的试验方法 |
|
| DIN EN 14075-2003 |
地下设备用石油液化气储气容量不大于13m(上标3)的连续生产静态焊接圆柱型钢罐.设计和制造 |
(Static welded steel cylindrical tanks, serially produced for the storage of Liquiefied Petroleum Gas (LPG) having a volume not greater than 13 m and for installation underground - Design and manufacture; German version EN 14075:2002) |
| DIN EN 14075-2005 |
的连续生产的液化石油气储存用固定焊接圆柱形钢罐.设计和制造 |
DIN EN 14075-2005 |
| DIN EN 14076-2004 |
木楼梯.术语 |
|
| DIN EN 14077-2004 |
石油产品.有机卤素含量的测定.氧化微库仑法 |
|
| DIN EN 14078-2004 |
液化石油产品.中间馏出物中脂肪酸甲脂(FAME)的测定.红外光谱法 |
|
| DIN EN 14079-2003 |
非放射性医疗装置.绷带纱布、脱脂棉和粘胶纱布的性能要求和试验方法 |
(Non-active medical devices - Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze; German version EN 14079:2003) |
| DIN EN 1408-1998 |
饮用水制备用的化合物.聚(双烯二甲基氯化胺) |
(Chemicals used for treatment of water intended for human consumption - Poly (diallydimethylammoniumchloride); German version EN 1408:1998) |
| DIN EN 14082-2003 |
食品.痕量素的测定.用干灰后的原子吸收光谱法测定铅、镉、锌、铜、铁和铬 |
(Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing; German version EN 14082:2003) |
| DIN EN 14083-2003 |
食品.痕量素的测定.食品经压煮后用石墨炉原子吸收光谱法测定铅、镉、铬和钼 |
(Foodstuffs - Determination of trace elements - Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion; German version EN 14083:2003) |
| DIN EN 14084-2003 |
食品.痕量素的测定.食品经微波蒸煮后用原子吸收光谱法测定铅、镉、锌、铜、和铁 |
(Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion; German version EN 14084:2003) |
| DIN EN 14085-2003 |
弹性地板覆盖物.活动铺设预制装配式楼板单规范 |
(Resilient floor coverings - Specification for floor panels for loose laying; German version EN 14085:2003) |
| DIN EN 14086-2003 |
纸和纸板.光泽度的测量.用平行束的45度,DIN法 |
(Paper and board - Measurement of specular gloss - 45?gloss with a parallel beam, DIN method; German version EN 14086:2003) |
| DIN EN 14089-2003 |
航空航天.航天产品保障.控制材料的极限寿命 |
(Aerospace - Space product assurance - The control of limited-life materials; German and English version EN 14089:2002) |
| DIN EN 1409-1998 |
饮用水制备用化合物.聚胺 |
(Chemicals used for treatment of water intended for human consumption - Polyamines; German version EN 1409:1998) |
| DIN EN 14090-2002 |
航空航天.航天产品保证.筛选航天材料的燃烧性能试验 |
(Aerospace - Space product assurance - Flammability testing for the screening of space materials; German and English version EN 14090:2002) |
| DIN EN 14091-2003 |
航空航天.航天产品保证.航天材料筛选用的热真空除气试验 |
(Aerospace - Space product assurance - Thermal vacuum outgassing test for the screening of space materials; German and English version EN 14091:2002) |
| DIN EN 14093-2003 |
航空航天.航天项目管理.组织和综述指导 |
(Aerospace - Space project management - Organization and conduct of reviews; German and English version EN 14093:2002) |
| DIN EN 14095-2004 |
建筑物内的水调节设备.铝阳极电解质处理设备.性能、安全和试验要求 |
|
| DIN EN 14096-1-2003 |
无损检验.射线摄影胶片数字化系统的合格鉴定.第1部分:定义、图像质量参数的定量测量、标准参考胶片和定性控 |
(Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control; German version EN 14096-1:2003) |
| DIN EN 14096-2-2003 |
无损检验.射线摄影胶片数字化系统的合格鉴定.第2部分:最低要求 |
(Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements; German version EN 14096-2:2003) |
| DIN EN 14097-2002 |
航空航天.航天产品保证.不合格控制系统 |
(Aerospace - Space product assurance - Nonconformance control system; German and English version EN 14097:2001) |
| DIN EN 14098-2002 |
航空航天.航天产品保证.检验航天材料和工艺的热循环试验 |
(Aerospace - Space product assurance - Thermal cycling test for the screening of space materials and processes; German and English version EN 14098:2001) |
| DIN EN 14099-2002 |
航空航天.航天产品保证.带压敏带材的覆层和装饰层的剥离和拉脱强度的测量 |
(Aerospace - Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes with pressure-sensitive tapes; German and English version EN 14099:2001) |
| DIN EN 141-2000 |
呼吸防护装置.毒气过滤器和组合过滤器.要求、试验、标记 |
(Respiratory protective devices - Gas filters and combined filters - Requirements, testing, marking; German version EN 141:2000) |
| DIN EN 1410-1998 |
饮用水制备用的化合物.阳离子聚丙烯醛酰胺 |
(Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides; German version EN 1410:1998) |
| DIN EN 14100-2002 |
航空航天.航天产品保证.载人航天器坐舱用的材料和装配物品中的废弃产品的测定 |
(Aerospace - Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment; German and English version EN 14100:2001) |
| DIN EN 14101-2002 |
航空航天.航天产品保证.控制应力腐蚀断裂用的材料的选择 |
(Aerospace - Space product assurance - Material selection for controlling stress-corrosion cracking; German and English version EN 14101:2001) |
| DIN EN 1411-1996 |
塑料管和防护管系统.热塑塑料管.用梯级法测定抗外冲击应力的能力 |
(Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method; German version EN 1411:1996) |
| DIN EN 141101-1992 |
电子件质量评定协调体系.空白分规范:用丝杠和直接旋转调整的微调电位计 |
(Harmonized system of quality assessment for electronic components; detail specification: lead-screw actuated and rotary preset potentiometers; german version EN 141101:1992) |
| DIN EN 14114-2002 |
建筑设备和工业设施的湿热特性.水蒸汽扩散计算.制冷管绝缘系统 |
(Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems; German version EN 14114:2002) |
| DIN EN 14115-2002 |
织物.大帐篷和相关产品用材料的燃烧特性.易燃性 |
(Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition; German version EN 14115:2001) |
| DIN EN 14116-2003 |
危险物品运输用槽罐车.产品识别装置用数字接口 |
(Tanks for transport of dangerous goods - Digital interface for the product recognition device; German version EN 14116:2003) |
| DIN EN 14116-2005 |
危险物品运输用槽罐车.产品识别装置用数字接口 |
|
| DIN EN 14117-2004 |
混凝土结构的保护和维修用产品和系统.试验方法.粘性注入产品的流出时间测定 |
|
| DIN EN 14118-1-2003 |
加强材料.纺织玻璃纤维垫(短切原丝和连续的长丝垫)规范.第1部分:标识 |
(Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation; German version EN 14118-1:2003) |
| DIN EN 14118-2-2003 |
加强材料.纺织玻璃纤维垫(短切原丝和连续的长丝垫)规范.第2部分:试验方法和一般要求 |
(Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements; German version EN 14118-2:2003) |
| DIN EN 14118-3-2003 |
加强材料.纺织玻璃纤维垫(短切原丝和连续的长丝垫)规范.第3部分:特殊要求 |
(Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements; German version EN 14118-3:2003) |
| DIN EN 1412-1995 |
铜和铜合金.欧洲材料号码系统 |
(Copper and copper alloys - European numbering system; German version EN 1412:1995) |
| DIN EN 14120-2003 |
防护服.滚轴运动设备使用者用腕部、掌部、膝部和肘部防护装置.要求和试验方法 |
(Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods; German version EN 14120:2003) |
| DIN EN 14121-2003 |
铝和铝合金.电工用铝薄板材、带材和板材 |
(Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications; German version EN 14121:2003) |
| DIN EN 14122-2003 |
食品.高效液相色谱法测定维生素B1的含量 |
(Foodstuffs - Determination of vitamin B1 by HPLC; German version EN 14122:2003) |
| DIN EN 14124-2005 |
带内溢水口的冲洗水箱用入口阀 |
|
| DIN EN 14126 Berichtigung 1-2005 |
对DIN EN 14126-2004的勘误 |
|
| DIN EN 14126-2004 |
防护服.防传染制剂的防护服的性能要求和试验方法 |
(Protective clothing - Performance requirements and test methods for protective clothing against infective agents; German version EN 14126:2003) |
| DIN EN 14126-2004 |
防护服.防传染制剂的防护服的性能要求和试验方法 |
|
| DIN EN 14127-2004 |
无损检验.超声波厚度测量 |
|
| DIN EN 14128-2004 |
木材和木制产品的耐久性.用生物试验测定有治病虫害疗效的木材防腐剂的性能标准 |
|
| DIN EN 14129-2005 |
LPG罐用减压阀 |
|
| DIN EN 1413-1998 |
纺织品.含水萃取物中pH值的测定 |
(Textiles - Determination of pH of aqueous extract; German version EN 1413:1998) |
| DIN EN 14130-2003 |
食品.高效液相色谱法测定维生素C含量 |
(Foodstuffs - Determination of vitamin C by HPLC; German version EN 14130:2003) |
| DIN EN 14131-2003 |
食品.微生学测定法测定叶酸盐含量 |
(Foodstuffs - Determination of folate by microbiological assay; German version EN 14131:2003) |
| DIN EN 14134-2004 |
建筑物通风.住宅通风形态的性能试验和安装检查 |
|
| DIN EN 14135-2004 |
涂层.防火能力的测定 |
|
| DIN EN 14136-2004 |
体外诊断检验程序性能评估的外部质量评估方案的使用 |
|
| DIN EN 14137-2004 |
邮政服务.服务质量.利用跟踪系统进行挂号邮件和其他类型邮件服务损失的测量 |
(Postal services - Quality of service - Measurement of loss of registered mail and other types of postal service using a track and trace system; German version EN 14137:2003) |
| DIN EN 14137-2004 |
邮政服务.服务质量.利用跟踪系统进行挂号邮件和其他类型邮件服务损失的测量 |
|
| DIN EN 14139-2003 |
眼科光学.试戴镜规范 |
(Ophthalmic optics - Specifications for ready-to-wear spectacles; German version EN 14139:2002) |
| DIN EN 1414-2000 |
粘附锁紧件.后续检验的循环过程(包括补充件A1,2000) |
(Touch and close fasteners - Cycling procedure for subsequent testing (includes Amendment A1:2000); German version EN 1414:1996 + A1:2000) |
| DIN EN 14141-2004 |
天然气输送管道用阀门.性能要求和试验 |
|
| DIN EN 14142-1-2003 |
邮政服务.地址数据库.第1部分:邮政地址的组成部分 |
(Postal services - Address databases - Part 1: Components of postal addresses; German version EN 14142-1:2003) |
| DIN EN 14144-2003 |
救生圈.要求和试验 |
(Lifebuoys - Requirements, tests; German version EN 14144:2003) |
| DIN EN 14145-2003 |
救生圈用夹持装置 |
(Holders for lifebuoys; German version EN 14145:2003) |
| DIN EN 14146-2004 |
天然石料试验方法.弹性的动态模量测定(通过基本的共振频率测量) |
|
| DIN EN 14147-2004 |
天然石材试验方法.抗盐雾老化的测定 |
(Natural stone test methods - Determination of resistance to ageing by salt mist; German version EN 14147:2003) |
| DIN EN 14147-2004 |
天然石材试验方法.抗盐雾老化的测定 |
|
| DIN EN 1415-1997 |
粘附锁紧件.切边的性能 |
(Touch and close fasteners - Behaviour of slit selvedges; German version EN 1415:1996) |
| DIN EN 14153-1-2004 |
娱乐潜水服务.娱乐水肺潜水员训练用与安全有关的最低要求.第1部分:1等.监督潜水员 |
|
| DIN EN 14153-2-2004 |
娱乐潜水服务.水肺潜水员训练的安全相关最低要求.第2部分:水平2.独立潜水员 |
(Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 2: Level 2 - Autonomous diver; German version EN 14153-2:2003) |
| DIN EN 14153-2-2004 |
娱乐潜水服务.水肺潜水员训练的安全相关最低要求.第2部分:水平2.独立潜水员 |
|
| DIN EN 14153-3-2004 |
娱乐潜水服务.水肺潜水员训练的安全相关最低要求.第3部分:水平3.下潜领头人 |
(Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 3: Level 3 - Dive leader; German version EN 14153-3:2003) |
| DIN EN 14153-3-2004 |
娱乐潜水服务.水肺潜水员训练的安全相关最低要求.第3部分:水平3.下潜领头人 |
|
| DIN EN 14154-1-2005 |
水表.第1部分:一般要求 |
|
| DIN EN 14154-1-2005 |
水表.第1部分:一般要求 |
|
| DIN EN 14154-2-2005 |
水表.第2部分:使用装置和条件 |
|
| DIN EN 14154-2-2005 |
水表.第2部分:使用装置和条件 |
|
| DIN EN 14154-3-2005 |
水表.第3部分:试验方法和设备 |
|
| DIN EN 14154-3-2005 |
水表.第3部分:试验方法和设备 |
|
| DIN EN 14157-2005 |
天然石料试验方法.耐磨性的测定 |
|
| DIN EN 14158-2004 |
天然石料试验方法.破裂力的测定 |
|
| DIN EN 1416-1997 |
粘附锁紧件.弯曲性测定 |
(Touch and close fasteners - Determination of curvature; German version EN 1416:1996) |
| DIN EN 14160-2002 |
航空航天.航天工程技术.软件 |
(Aerospace - Space engineering - Software; German and English version EN 14160:2001) |
| DIN EN 14161-2004 |
石油和天然气工业.管道传输系统 |
|
| DIN EN 14163-2002 |
石油和天然气工业.管道运输系统.管道焊接 |
(Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified); German version EN 14163:2001, text German and English) |
| DIN EN 14165-2005 |
空间工程标准.断裂控制 |
|
| DIN EN 1417-1997 |
橡胶机械和塑料机械.轧机.安全要求 |
(Rubber and plastics machines - Two roll mills - Safety requirements; German version EN 1417:1996) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com