标准号 |
中文名称 |
英文名称 |
DIN EN 936-1998 |
人用水处理用化学制品.二氧化碳. |
(Chemicals used for treatment of water intended for human consumption - Carbon dioxide; German version EN 936:1997) |
DIN EN 937-1999 |
饮用水制备用化合物.乙基氯 |
(Chemicals used for treatment of water intended for human consumption - Chlorine; German version EN 937:1999) |
DIN EN 938-2000 |
人类饮用水处理用化学制品.亚氯酸钠 |
(Chemicals used for water intended for human consumption - Sodium chlorite; German version EN 938:1999) |
DIN EN 939-2000 |
人类饮用水处理用化学制品.盐酸 |
(Chemicals used for water intended for human consumption - Hydrochloric acid; German version EN 939:1999) |
DIN EN 940-1997 |
木材加工机械的安全性.组合式木材加工机械 |
(Safety of woodworking machines - Combined woodworking machines; German version EN 940:1997) |
DIN EN 941-1995 |
铝和铝合金.一般用途的圆片坯料和圆片预制材料.规范 |
(Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications; German version EN 941:1995) |
DIN EN 942-1996 |
木材工作用木材.按木材质量的一般分类 |
(Timber in joinery - General classification of timber quality; German version EN 942:1996) |
DIN EN 943-1-2002 |
防护液体和气体化学物质(包括液体气溶胶和固体颗粒)的防护服装.第1部分:透气和不透气的“气密型“(1型)和“ |
(Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1: Performance requirements for ventilated and non-ventilated `gas-tight` (Type 1) and `non-gas-tight` (Type 2) chemical protective suits; Germ |
DIN EN 943-2-2002 |
防护液体和气体化学物质(包括液体气溶胶和固体颗粒)的防护服装.第2部分:急救队用气密性(1型)化学防护套装的 |
(Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET); German version EN 943-2:2001) |
DIN EN 947-1999 |
旋转叶门.垂直负载抗力的测定 |
(Hinged or pivoted doors - Determination of the resistance to vertical load; German version EN 947:1998) |
DIN EN 948-1999 |
铰接门或旋转门.静态扭转阻力的测定 |
(Hinged or pivoted doors - Determination of the resistance to static torsion; German version EN 948:1999) |
DIN EN 949-1999 |
窗,门,百叶窗,卷帘式百叶窗和落地窗帘.测定门对轻型和重型碰撞体碰撞的阻抗力 |
(Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors; German version EN 949:1998) |
DIN EN 950-1999 |
门扉.硬体冲击阻力的测定 |
(Door leaves - Determination of the resistance to hard body impact; German version EN 950:1999) |
DIN EN 951-1999 |
门扉.测定高,宽,厚和垂直度的测量方法 |
(Door leaves - Method for measurement of height, width, thickness and squareness; German version EN 951:1998) |
DIN EN 952-1999 |
门扉.总体和局域平整度.测量方法 |
(Door leaves - General and local flatness - Measurement method; German version EN 952:1999) |
DIN EN 953-1997 |
机械的安全.分离保护装置.固定式和活动式分离保护装置的设计和结构的一般要求 |
(Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards; German version EN 953:1997) |
DIN EN 954-1 Bb.1-2000 |
机械安全.控制系统的安全相关零件.第100部分:EN954-1-1996的使用和应用指南 |
(Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996; German version CR 954-100:1999) |
DIN EN 954-1-1997 |
机器的安全性.控制装置上和安全相关的部件.第1部分:总设计原理 |
(Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design; German version EN 954-1:1996) |
DIN EN 955-2-1995 |
耐火制品的化学分析.第2部分:含硅石和/或矾土制品(湿法) |
(Chemical analysis of refractory products - Part 2: Products containing silicia and/or alumina (wet method); German version EN 955-2:1995) |
DIN EN 957-1-1999 |
固定式训练设备.第1部分:一般安全技术要求和检验方法 |
(Stationary training equipment - Part 1: General safety requirements and test methods (including amendment 1:1998); German version EN 957-1:1996 + A1:1998) |
DIN EN 957-1-2005 |
固定式训练器材.第1部分:一般安全要求和试验方法 |
|
DIN EN 957-10-2005 |
固定的训练器材.第10部分:带固定轮或无活动轮的训练用自行车的附加特定安全要求和试验方法 |
|
DIN EN 957-2-1996 |
固定式训练设备.第2部分:力量训练设备以及附加的特殊安全技术要求和检验方法 |
(Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods; German version EN 957-2:1996) |
DIN EN 957-4-1996 |
固定式训练设备.第4部分:力量训练台以及附加的特殊安全技术要求和检验方法 |
(Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods; German version EN 957-4:1996) |
DIN EN 957-5-1996 |
固定式训练设备.第5部分:踏板训练设备以及附加的特殊安全技术要求和检验方法 |
(Stationary training equipment - Part 5: Pedal crank training equipment, additional specific safety requirements and test methods; German version EN 957-5:1996) |
DIN EN 957-6-2001 |
固定训练设备.第6部分:脚踏车,附加特殊安全要求和试验方法 |
(Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods; German version EN 957-6:2001) |
DIN EN 957-7-1998 |
固定式训练设备.第7部分:浆舵装置的附加特殊安全技术要求和检验方法 |
(Stationary training equipment - Part 7: Rowing machines, additional specific safety requirements and test methods; German version EN 957-7-1998) |
DIN EN 957-8-1998 |
固定式训练设备.第8部分:梯子,梯子攀登装置和脚扣.附加特殊安全要求和检验方法 |
(Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods; German version EN 957-8-1998) |
DIN EN 957-9-2003 |
固定式训练设备.第9部分:椭圆形训练器材的附加特殊安全要求和试验方法 |
(Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods; German version EN 957-9:2003) |
DIN EN 958-1996 |
登山设备.攀登用能量吸收装置.安全要求和试验方法 |
(Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods; German version EN 958:1996) |
DIN EN 959-1996 |
登山设备.岩石锚钉.安全要求和试验方法 |
(Mountaineering equipment - Rock anchors - Safety requirements and test methods; German version EN 959:1996) |
DIN EN 960-1998 |
用于头盔试验的头形 |
(Headforms for use in the testing of protective helmets (includes amendment A1:1998); German version EN 960:1994 + A1:1998) |
DIN EN 962-2000 |
移动式气瓶.工业和医疗气体瓶的阀门保护帽和阀盖.设计、制造和试验(包括修改件A1-1999和A2-2000) |
(Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests (included amendment A1:1999 + A2:2000); German version EN 962:1996 + A1:1999 + A2:2000) |
DIN EN 963-1995 |
土工织物和及其相关产品.试样的取样和准备 |
(Geotextiles and geotextile-related products - Sampling and preparation of test specimens; German version EN 963:1995) |
DIN EN 964-1-1995 |
土工织物及其相关产品.规定压力下厚度的测定.第1部分:单层 |
(Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 1: Single layers; German version EN 964-1:1995) |
DIN EN 965-1995 |
土工织物及其相关产品.单位面积质量(物质)的测定 |
(Geotextiles and geotextile-related products - Determination of mass per unit area; German version EN 965:1995) |
DIN EN 966-1996 |
航空体育运动用防护帽 |
(Helmets for airborne sports; German version EN 966:1996) |
DIN EN 966/A1-2000 |
航空体育运动用防护帽.补充件A1 |
(Helmets for airborne sports; Amendment A1; German version EN 966:1996/A1:2000) |
DIN EN 967-1996 |
冰球运动员的头盔 |
(Head protectors for ice hockey players; German version EN 967:1996) |
DIN EN 969-1995 |
燃气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 |
(Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995) |
DIN EN 969/A1-1999 |
煤气管道用管,管件,可锻铸铁附件及其连接件.要求和检验方法 |
(Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995/A1:1998) |
DIN EN 970-1997 |
熔焊焊缝的无损检验.抽检 |
(Non-destructive examination of fusion welds - Visual examination; German version EN 970:1997) |
DIN EN 971-1 Bb.1-1996 |
漆和涂料.涂层材料的专业表述和定义.第1部分:一般概念.解释 |
(Paints and varnishes - Terms and definitions for coating materials - Part 1: General terms; explanations) |
DIN EN 971-1-1996 |
漆和涂料.涂层材料的专业表述和定义.第1部分:一般概念 |
(Paints and varnishes - Terms and definitions for coating materials - Part 1: General terms; trilingual version EN 971-1:1996) |
DIN EN 972-1999 |
制革机械.轧制机.安全要求 |
(Tannery machines - Reciprocating roller machines - Safety requirements; German version EN 972:1998) |
DIN EN 973-2002 |
人类用水处理用的化学试剂.离子交换器再生用氯化纳 |
(Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers; German version EN 973:2002) |
DIN EN 974-2004 |
人类生活用水处理用化学试剂.磷酸 |
(Chemicals used for treatment of water intended for human consumption - Phosphoric acid; German version EN 974:2003) |
DIN EN 974-2004 |
人类生活用水处理用化学试剂.磷酸 |
|
DIN EN 975-1-1999 |
锯木材.阔叶木材按表象分类.第1部分:橡树和山毛榉 |
(Sawn timber - Appearance grading of hardwood - Part 1: Oak and beech (including Amendment 1:1999); German version EN 975-1:1995 + A1:1999) |
DIN EN 975-2-2004 |
锯材.硬木按表观分类.第2部分:白杨木 |
|
DIN EN 976-1-1997 |
玻璃钢制地下槽罐(GRP).石油基液化燃料无压力存储用卧式圆桶罐.第1部分:单壁罐的要求和检验方法 |
(Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks; German version EN 976-1:1997) |
DIN EN 976-2-1997 |
玻璃钢制地下槽罐(GRP).石油基液化燃料无压力存储用卧式圆桶罐.第2部分:运输,搬运,中间存储,单壁罐的安装 |
(Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks; German version EN 976-2:1997) |
DIN EN 977-1997 |
玻璃钢制地下槽罐(GRP).液体单面负载的试验规定 |
(Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids; German version EN 977:1997) |
DIN EN 978-1997 |
玻璃钢制地下槽罐(GRP).系数α和β的测定 |
(Underground tanks of glass-reinforced plastics (GRP) - Determination of creep factorand factor ; German version EN 978:1997) |
DIN EN 980-2003 |
医疗产品标识用图形符号 |
(Graphical symbols for use in the labelling of medical devices; German version EN 980:2003) |
DIN EN 981-1997 |
机器的安全性.声光报警信号和信息信号系统 |
(Safety of machinery - System of auditory and visual danger and information signals; German version EN 981:1996) |
DIN EN 982-1996 |
机器的安全性.液压技术设备及其部件的安全要求.液压装置 |
(Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics; German version EN 982:1996) |
DIN EN 983-1996 |
机器的安全性.液压技术设备及其部件的安全要求.气动装置 |
(Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics; German version EN 983:1996) |
DIN EN 984-2002 |
铺地织物.针刺铺地织物使用表面单位面积质量的测定 |
(Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings; German version EN 984:2001) |
DIN EN 985-2001 |
铺地织物.小脚轮椅试验 |
(Textile floor coverings - Castor chair test; German version EN 985:2001) |
DIN EN 986-1995 |
铺地纺织物.铺地砖.测定由于湿度和温度条件的变化作用以及垂直表面变形作用引起的尺寸变化 |
(Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane; German version EN 986:1995) |
DIN EN 988-1996 |
锌和锌合金.建筑用轧制平面产品的要求 |
(Zinc and zinc alloys - Specification for rolled flat products for building; German version EN 988:1996) |
DIN EN 989-1995 |
钢筋和热压充气混凝土胶合性能的“推拉“试验法测定 |
(Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the “Push Out“ test; German version EN 989:1995) |
DIN EN 990-2003 |
热压处理过的加气混凝土和多孔结构轻质集料混凝土中钢筋防蚀检验的试验方法 |
(Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure; German version EN 990:2002) |
DIN EN 991-1995 |
用热压充气混凝土或多孔结构轻质集料混凝土制成的预制钢筋构件的尺寸测定 |
(Determination of the dimensions of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 991:1995) |
DIN EN 992-1995 |
多孔结构轻质集料混凝土干密度的测定 |
(Determination of the dry density of lightweight aggregate concrete with open structure; German version EN 992:1995) |
DIN EN 993-1-1995 |
密封成型耐火制品检验方法.第1部分:粗密度,开口孔隙度和整体孔隙度的测定 |
(Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity; German version EN 993-1:1995) |
DIN EN 993-10-1998 |
密封成型耐火制品检验方法.第10部分:温度影响后恒定长度变化的测定 |
(Methods of test for dense shaped refractory products - Part 10: Determination of permanent change in dimensions on heating; German version EN 993-10:1997) |
DIN EN 993-12-1997 |
密封成型耐火制品检验方法.第12部分:熔锥比值(耐火性)测定 |
(Methods of test for dense shaped refractory products - Part 12: Determination of pyrometric cone equivalent (refractoriness); German version EN 993-12:1997) |
DIN EN 993-13-1995 |
密封成型耐火制品的检验方法.第13部分:对试验室用参考测温锥的规定 |
(Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use; German version EN 993-13:1995) |
DIN EN 993-14-1998 |
密封成型耐火制品的检验方法.第14部分:按热线材(交叉)法测定热导能力 |
(Methods of testing dense shaped refractory products - Part 14: Determination of thermal conductivity by the hot-wire (cross-array) method; German version EN 993-14:1998) |
DIN EN 993-15-1998 |
密封成型耐火制品的检验方法.第15部分:按热线材(平行)法测定热导能力 |
(Methods of test for dense shaped refractory products - Part 15: Determination of thermal conductivity by the hot-wire (parallel) method; German version EN 993-15:1998) |
DIN EN 993-15-2005 |
致密成型耐火制品的试验方法.第15部分:用热线(平行)测量法测定导热性 |
|
DIN EN 993-16-1995 |
密封成型耐火制品的检验方法.第16部分:耐硫酸腐蚀性测定 |
(Dense shaped refractory products - Methods of test - Part 16: Determination of resistance to sulphuric acid; German version EN 993-16:1995) |
DIN EN 993-17-1999 |
密封成型耐火制品的检验方法.第17部分:用水银排出法测定颗粒材料的粗密度的测定 |
(Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998) |
DIN EN 993-18-2002 |
密封成型耐火制品的检验方法.第18部分:用真空湿法测定颗粒物的体密度 |
(Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vakuum; German version EN 993-18:2002) |
DIN EN 993-19-2004 |
致密成型耐火制品检验方法.第19部分:由差动法测定热膨胀性 |
|
DIN EN 993-2-1995 |
密封成型耐火制品检验方法.第2部分:密度测定 |
(Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995) |
DIN EN 993-2/A1-2004 |
密实成型耐火制品的试验方法.第2部分:真密度测定 |
(Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995/A1:2003) |
DIN EN 993-2/A1-2004 |
密实成型耐火制品的试验方法.第2部分:真密度测定 |
|
DIN EN 993-20-2004 |
致密成型耐火制品检验方法.第20部分:环境温度下抗磨性的测定 |
|
DIN EN 993-3-1997 |
密封成型耐火制品检验方法.第3部分:含碳制品的检验 |
(Methods of test for dense shaped refractory products - Part 3: Test methods for carbon-containing refractories; German version EN 993-3:1997) |
DIN EN 993-4-1995 |
密封成型耐火制品检验方法.第4部分:透气性测定 |
(Methods of test for dense shaped refractory products - Part 4: Determination of permeability to gases; German version EN 993-4:1995) |
DIN EN 993-5-1998 |
密封成型耐火制品检验方法.第5部分:低温抗压强度的测定 |
(Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength; German version EN 993-5:1998) |
DIN EN 993-6-1995 |
密封成型耐火制品的检验方法.第6部分:室温下抗弯强度的测定 |
(Methods of test for dense shaped refractory products - Part 6: Determination of moduls of rupture at ambient temperature; German version EN 993-6:1995) |
DIN EN 993-7-1998 |
密封成型耐火制品检验方法.第7部分:高度下弯曲强度的测定 |
(Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures; German version EN 993-7:1998) |
DIN EN 993-8-1997 |
密封成型耐火制品检验方法.第8部分:压力下软化性能的测定 |
(Methods of testing dense shaped refractory products - Part 8: Determination of refractoriness-under-load; German version EN 993-8:1997) |
DIN EN 993-9-1997 |
密封成型耐火制品的检验方法.第9部分:压缩蠕变测定 |
(Methods of testing dense shaped refractory products - Part 9: Determination of creep in compression; German version EN 993-9:1997) |
DIN EN 994-1995 |
铺地纺织物.铺地砖边长和垂直度的测定 |
(Textile floor coverings - Determination of the length of the edges and squareness of tiles; German version EN 994:1995) |
DIN EN 995-1995 |
铺地纺织物.背衬蠕变的评定 |
(Textile floor coverings - Assessment of the creep of the backings; German version EN 995:1995) |
DIN EN 996-1996 |
打桩设备.安全性要求.德文版本EN996:1995 |
(Piling equipment - Safety requirements; German version EN 996:1995) |
DIN EN 996/A1-2000 |
打桩设备.安全性要求(包括技术勘误AC:1999)修改件A1:德文版本EN996:1995/A1:1999+AC:1999 |
(Piling equipment - Safety requirements (including Corrigendum AC:1999); Amendment A1; German version EN 996:1995/A1:1999 + AC:1999) |
DIN EN 997-1999 |
带收集放泄弯管的厕所蓄水槽 |
(WC pans with integral trap; German version EN 997:1999) |
DIN EN 998-1-2003 |
砌筑用砂浆规范.第1部分:打底子灰和抹灰用砂浆 |
(Specification for mortar for masonry - Part 1: Rendering and plastering mortar; German version EN 998-1:2003) |
DIN EN 998-2-2003 |
砌筑用砂浆规范.第2部分:砌筑砂浆 |
(Specification for mortar for masonry - Part 2: Masonry mortar; German version EN 998-2:2003) |
DIN EN 999-1998 |
机器的安全性.考虑到人体部分靠近速度的防护设备的放置 |
(Safety of machinery - The positioning of protective equipment in respect of approach speed of parts of the human body; German version EN 999:1998) |
DIN EN ISO 1 Bb.1-2004 |
产品几何量技术规范.产品几何量技术规范和验证用标准温度.由于热影响造成的系统错误和长度测量不确定度的分 |
(Geometrical product specifications (GPS) - Standard reference temperature for geometrical product specification and verification - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences (ISO/TR 160) |
DIN EN ISO 1 Bb.1-2004 |
产品几何量技术规范.产品几何量技术规范和验证用标准温度.由于热影响造成的系统错误和长度测量不确定度的分布 |
|
DIN EN ISO 1-2002 |
产品几何量技术规范(GPS).产品几何量技术规范和鉴定用的标准参考温度 |
(Geometrical product specifications (GPS) - Standard reference temperature for geometrical product specifications and verification (ISO 1:2002); German version EN ISO 1:2002) |
DIN EN ISO 10007-1996 |
质量管理.配置管理指南 |
(Quality management - Guidelines for configuration management (ISO 10007:1995); Trilingual version EN ISO 10007:1996) |
DIN EN ISO 10012-2004 |
测量管理系统.测量过程和测量设备的要求 |
|
DIN EN ISO 10058-1996 |
菱美矿和白云石.化学分析 |
(Magnesites and dolomites - Chemical analysis (ISO 10058:1992); German version EN ISO 10058:1995) |
DIN EN ISO 10062-1995 |
在人工环境中,极低浓度污染气候(对物质)腐蚀程度的试验 |
(Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:1991); German version EN ISO 10062:1995) |
DIN EN ISO 10066-1998 |
软质泡沫聚合材料.压缩蠕变测定 |
(Flexible cellular polymeric materials - Determination of creep in compression (ISO 10066:1991); German version EN ISO 10066:1997) |
DIN EN ISO 10075-1-2000 |
有关工作所致精神负担的人类工效学原理.第1部分:一般术语和定义 |
(Ergonomic principles related to mental work-load - Part 1: General terms and definitions (ISO 10075:1991); German version EN ISO 10075-1:2000) |
DIN EN ISO 10075-2-2000 |
与精神工作荷载有关的人类工效学原理.第2部分:设计原理 |
(Ergonomic principles related to mental workload - Part 2: Design principles (ISO 10075-2:1996); German version EN ISO 10075-2:2000) |
DIN EN ISO 10075-3-2004 |
与心理负荷有关的人类工效学原则.第3部分:心理负荷测量和评估方法的准则和要求 |
|
DIN EN ISO 10077-1-2000 |
门窗和遮板的热性能.热传递系数的计算.第1部分:简化法 |
(Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: Simplified method (ISO 10077-1:2000); German version EN ISO 10077-1:2000) |
DIN EN ISO 10079-1-2000 |
医用吸引设备.第1部分:电驱动吸引设备.安全要求 |
(Medical suction equipment - Part 1: Electrically powered suction equipment; safety requirements (ISO 10079-1:1999); German version EN ISO 10079-1:1999) |
DIN EN ISO 10079-2-2000 |
医用吸引设备.第2部分:手动吸引设备. |
(Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:1999); German version EN ISO 10079-2:1999) |
DIN EN ISO 10079-3-2000 |
医用吸引设备.第3部分:动力来源于真空容器或压力源的吸引设备 |
(Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1999); German version EN ISO 10079-3:1999) |
DIN EN ISO 10081-1-2005 |
致密成型耐火产品的分类.第1部分:硅酸铝 |
|
DIN EN ISO 10081-1-2005 |
致密成型耐火产品的分类.第1部分:硅酸铝 |
|
DIN EN ISO 10081-2-2005 |
致密成型耐火制品的分类.第2部分:含残留碳小于7%的碱性产品 |
|
DIN EN ISO 10081-2-2005 |
致密成型耐火制品的分类.第2部分:含残留碳小于7%的碱性产品 |
|
DIN EN ISO 10081-3-2005 |
致密成型耐火制品的分类.第3部分:含残留碳7%到50%的碱性产品 |
|
DIN EN ISO 10081-3-2005 |
致密成型耐火制品的分类.第3部分:含残留碳7%到50%的碱性产品 |
|
DIN EN ISO 10082-2000 |
塑料.酚醛树脂.定义和试验方法 |
(Plastics - Phenolic resins - Classification and test methods (ISO 10082:1999); German version EN ISO 10082:1999) |
DIN EN ISO 10087 Berichtigung 1-2001 |
DINENISO10087-1996的勘误 |
(Corrigendum to DIN EN ISO 10087:1996 (German version EN ISO 10087:1996/A1:2000)) |
DIN EN ISO 10087-1996 |
小型船舶.船体识别标记.编码体系 |
(Small craft - Hull identification - Coding system (ISO 10087:1995); German version EN ISO 10087:1996) |