标准号 |
中文名称 |
英文名称 |
DIN 53438-3-1984 |
可燃材料的检验.在燃烧器中的火焰性能.表面火焰 |
(Testing of combustible materials; response to ignition by a small flame; surface ignition) |
DIN 53442-1990 |
塑料的检验.在弯曲范围内对扁平试样做的振动疲劳试验 |
(Testing of plastics; fatigue test in the field of bending strain at flat specimens) |
DIN 53463-1974 |
层压材料的检验.层压材料板脱层试验 |
(Testing of Laminates; Splitting Test on Laminated Sheets) |
DIN 53464-1962 |
塑料检验.热固性模压塑料的收缩性能测定 |
(Testing of Plastics; Determination of Shrinkage Properties of Moulded Materials from Thermosetting Moulding Materials) |
DIN 53465-1963 |
塑料检验.热固性模压塑料闭合时间的测定 |
(Testing of Plastics; Determination of the Closing Time of Thermosetting Compression Moulding Materials) |
DIN 53470-1951 |
模压塑料的检验.制造热固模压塑料标准试样的压模 |
(Testing of Compression Moulding Materials; Compression Mould for the Production of Standard Specimens of Thermosetting Compression Moulding Materials) |
DIN 53474-1998 |
塑料.天然橡胶和弹性体的检验.氯含量的测定(维克伯法分解) |
(Testing of plastics, rubber and elastomers - Determination of the chlorine content (Wickbold-Combustion)) |
DIN 53477-1992 |
塑料的检验.通过干法筛析测定颗粒大小和分布 |
(Testing of plastics; determination of particle size distribution of moulding materials by dry sieving analysis) |
DIN 53479-1976 |
塑料和弹性体的试验.密度测定 |
(Testing of Plastics and Elastomers; Determination of Density) |
DIN 53483-1-1969 |
绝缘材料的试验.介电性能的测定.概念.一般数据 |
(Testing of Insulating Materials; Determination of Dielectric Properties; Definitions, General Information) |
DIN 53483-2-1970 |
绝缘材料的试验.介电性能的测定.规定频率50HZB.1KHZ.1MHZ时的试验 |
(Testing of Insulating Materials; Determination of Dielectric Properties; Testing at Standard Frequencies of 50 Hz, 1 kHz, 1 MHz) |
DIN 53483-3-1969 |
绝缘材料的试验.介电性能的测定.频率100MHZ以下液体测量用光电管 |
(Testing of Insulating Materials; Determination of Dielectric Properties; Measuring Cells for Liquids for Frequencies up to 100 MHz) |
DIN 53488-1963 |
塑料的检验.穿孔试验 |
(Testing of Plastic Sheets; Hole Test) |
DIN 53489-1968 |
电气绝缘材料的试验.电解腐蚀作用的评定 |
(Testing of Electrical Insulating Materials; Asessing the Effect of Electrolytic Corrosion) |
DIN 53493-1980 |
塑料的检验.超高分子聚乙烯(UHMWPE)模塑材料的流量值测定 |
(Testing of plastics; determination on flow value of ultra high molecular weight polyethylene (UHMWPE) moulding materials) |
DIN 53494-1984 |
电镀层.电镀塑料件的检验.牵拉力的测定 |
(Electroplated coatings; testing of electroplated plastic articles; determination of peel strenght) |
DIN 53496-1984 |
电度层.电镀塑料件的检验.温度交变检验 |
(Electroplated coatings; testing of electroplated plastic articles; thermal cycling test) |
DIN 53497-1969 |
塑料的检验.在没有外部机械应力条件下.对热塑性模塑材料成形件的热贮存试验 |
(Testing of Plastics; Hot Storage Test on Mouldings Made of Thermoplastic Moulding Materials without External Mechanical Stressing) |
DIN 53498-1967 |
塑料的检验.热固性模压塑料的压制件热贮存 |
(Testing of Plastics; Heat Storage of Compression Mouldings Made of Thermosetting Compression Moulding Materials) |
DIN 53499-1974 |
塑料制品的检验.热固性模塑材料的煮沸试验 |
(Testing of plastics; boiling test of moulded articles made of thermosetting moulding materials) |
DIN 53504-1994 |
生橡胶和弹性体的检验.在拉伸试验中测定断裂强度.抗拉强度.断裂伸长和应力值 |
(Testing of rubber; determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test) |
DIN 53505-2000 |
橡胶试验.肖氏(Shore)A和D硬度试验 |
(Testing of rubber - Shore A and Shore D hardness test) |
DIN 53506-1990 |
弹性体的检验.针角抗撕裂强度的测定 |
(Testing of rubber; determination of needle tear resistance) |
DIN 53507-1983 |
生橡胶和弹性体的检验.用条形试样测定弹性体的抗连续撕裂强度 |
(Testing rubber and elastomers; Determination of the tear strength of elastomers; Trouser test piece) |
DIN 53508-2000 |
橡胶试验.加速老化 |
(Testing of rubber - Accelerated ageing) |
DIN 53509-1 Berichtigung 1-2003 |
DIN53509-1-2001的勘误 |
(Corrigenda to DIN 53509-1:2001-01) |
DIN 53509-1-2001 |
橡胶试验.抗臭氧龟裂的测定.第1部分:静态条件 |
(Testing of rubber - Determination of resistance to ozone cracking - Part 1: Static conditions) |
DIN 53509-2-1994 |
生橡胶和弹性体的检验.抗在臭氧作用下形成裂纹能力的测定.第2部分:在测试房测定臭氧浓度的参照法 |
(Testing of rubber - Determination of resistance to ozone cracking - Part 2: Reference method for determining ozone concentration in laboratory test chambers) |
DIN 53512-2000 |
橡胶试验.回弹性的测定(Schob摆锤) |
(Testing of rubber - Determination of rebound resilience (Schob pendulum)) |
DIN 53513-1990 |
橡胶和弹性体的检验.非共振强迫振荡时测定弹性体的粘胶弹性性能 |
(Determination of the viscoelastic properties of elastomers on exposure to forced vibration at non-resonant frequencies) |
DIN 53515-1990 |
生橡胶和弹性体以及塑料薄膜的检验.带凹口的Graves角型试样的连续撕裂试验 |
(Determination of tear strength of rubber elastomers and plastic film using Graves angle test piece with nick) |
DIN 53516-1987 |
生橡胶和弹性体的检验.磨损测法 |
(Testing of rubber and elastomers; determination of abrasion resistance) |
DIN 53519-1-1972 |
弹性体的检验.软橡胶压痕硬度的测定.标准试样的硬度检验 |
(Testing of elastomers; determination of indentation hardness of soft rubber (IRHD); hardness testing on standard specimens) |
DIN 53519-2-1972 |
弹性体的检验.软橡皮球压硬度的测定.国际橡胶硬度(IRHD).小尺寸试样的硬度检验.微硬度检验 |
(Testing of Elastomers; Determination of Indentation Hardness of Soft Rubber (IRHD), Hardness Testing on Specimens of Small Dimensions, Micro-testing) |
DIN 53521-1987 |
橡胶和弹性体的检验.对液体.蒸气和气体性能的测定 |
(Determination of the behaviour of rubber and elastomers when exposed to fluids and vapours) |
DIN 53522-1-1979 |
生橡胶和弹性体的检验.弯曲疲劳试验.概念.检验仪器.试样制备 |
(Testing of Rubber and Elastomers; Flexing Endurance Test; Definitions, Apparatus, Preparation of Test Pieces) |
DIN 53522-2-1979 |
生橡胶和弹性体的检验.弯曲疲劳试验.抗断裂强度的测定 |
(Testing of Rubber and Elastomers; Flexing Endurance Test; Determination of Resistance to Flex Cracking) |
DIN 53522-3-1979 |
生橡胶和弹性体的检验.弯曲疲劳试验.抗裂增长性的测定 |
(Testing of Rubber and Elastomers; Flexing Endurance Test; Determination of Resistance to Cut Growth) |
DIN 53523-2-1991 |
生橡胶和弹性体检验.用莫氏剪盘式粘合计检验.对仪器的要求 |
(Determination of Mooney viscosity of rubber; test apparatus) |
DIN 53523-3-1976 |
生橡胶和弹性体检验.莫氏剪盘式粘度计检验..莫氏粘度测定 |
(Testing of Rubber and Elastomers; Testing with the Mooney Shearing Disk Viscometer; Determining the Mooney Viscosity) |
DIN 53523-4-1976 |
生橡胶和弹性体的检验.用莫氏剪盘式粘度计检验.早期硫化性能的测定 |
(Testing of Rubber and Elastomers; Testing with the Mooney Shearing Disk Viscometer; Determining the Scorching Behaviour) |
DIN 53528-1988 |
涂胶织物的检验.擦洗耐磨试验.用Frank-Hauser仪进行耐磨测定 |
(Testing of rubber-coated textiles; abrasion test; determination of loss in mass by the Frank Hauser apparatus) |
DIN 53529-1-1983 |
生橡胶和弹性体的检验.硫化.一般的工作原理 |
(Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); general working principles) |
DIN 53529-2-1983 |
生橡胶和弹性体的检验.硫化.硫化过程的测定及交联等温线的反应动力学分析评价 |
(Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); evaluation of cross-linking isotherms in terms of reaction kinetics) |
DIN 53529-3-1983 |
生橡胶和弹性体的检验.硫化.用无转子的硫化测定交联特性 |
(Testing of rubbers; curemetry; types and applications of rotorless curemeters) |
DIN 53529-4-1991 |
生胶和合成橡胶的检验.硫化测量.用带转子的硫化计测定聚合性能 |
(Testing of rubber; curemetry; determination of vulcanization characteristics with the oscillating disc curemeter) |
DIN 53530-1981 |
有机材料的检验.粘合织物层的分离试验 |
(Testing of organic materials; Separation test on fabric plies bonded together) |
DIN 53531-1-1990 |
刚性材料的橡胶粘合性能的测定.平板法试验 |
(Determination of the adhesion of rubber to rigid materials by the one-plate method) |
DIN 53531-2-1990 |
橡胶和弹性体的检验.刚性材料粘合性能的测定.在端部是锥体的圆柱间试验 |
(Determination of the adhesion of rubber to rigid materials using conical ended cylinders) |
DIN 53533-1-1988 |
橡胶和弹性体的检验.在振动疲劳试验中抗疲劳损坏和释热检验(曲计检验).基本原理 |
(Testing of elastomeres; testing of heat generation and service life during the fatigue test (flexometer test); bases principles) |
DIN 53533-2-1988 |
橡胶和弹性体的检验.在振动疲劳试验中抗疲劳损坏和释热检验.(曲计检验).旋转曲计 |
(Testing of elastomers; testing of heat generation and service life during the fatigue test (flexometer test); rotary flexometer) |
DIN 53533-3-1988 |
橡胶和弹性体的检验.在振动疲劳试验中抗疲劳损坏和释热检验.(曲计检验).压缩曲计 |
(Testing of elastomers; testing of heat generation and service life during the fatigue test (flexometer test); compression-flexometer) |
DIN 53534-2000 |
橡胶试验.试样和成品的线性尺寸的测定 |
(Testing of rubber - Determination of linear dimensions of test pieces and products) |
DIN 53535-1982 |
生橡胶和弹性体的检验.动态检验法原理 |
(Testing of rubber; general requirements for dynamic testing) |
DIN 53536-1992 |
生橡胶和弹性体检验.透气性的测定 |
(Testing of rubber; determination of gas permeability) |
DIN 53537-1985 |
生橡胶和弹性体的检验.在压力下应力衰减测定 |
(Testing of elastomers; determination of stress relaxation in compression) |
DIN 53538-1-1992 |
标准参考弹性体,用以鉴定液体燃料对NBR性能的过氧交联丁腈橡胶(NBR) |
(Standard reference elastomers; acrylonitrile-butadiene rubber (NBR), peroxide-cured, for characterizing service fluids with respect to their action on NBR) |
DIN 53538-3-1992 |
标准参考弹性体.低硫交联的丁二烯-丙烯腈橡胶(NBR)鉴定液体燃料对NBR的性能 |
(Standard reference elastomers; acrylonitrile-butadiene rubber (NBR), low sulphur cured, for characterizing service fluids with respect to their action on NBR) |
DIN 53538-4-1988 |
标准参考弹性体.硅橡胶(MVQ).过氧化物硫化用以表明液态运行材料对MVO的性能上的特征 |
(Standard reference elastomers; silicone rubber (MVQ), peroxide cured, for characterizing service fluids with respect to their action on MVQ) |
DIN 53538-6-1993 |
标准弹性体.表征工作液体对用过氧化物硫化的氢化丙烯腈-丁二烯-橡胶(HNBR)的反应 |
(Standard reference rubber; hydrogenated acrylo-nitrile butadiene rubber (HNBR), vulcanized with peroxide, for characterizing service fluids with respect to their action on HNBR) |
DIN 53538-7-1995 |
标准弹性体.考虑到其对丙烯醛像胶反应作为工作液化物表征的丙烯醛橡胶制硫化物 |
(Standard reference rubber - Part 7: Polyacrylate rubber (ACM) for characterizing service fluids with respect to their action on ACM) |
DIN 53539-1979 |
弹性体的检验.连续撕裂试验.分离试验和剥离试验的评价 |
(Testing of elastomers; evaluation of tear propagation, adhesion and peel tests) |
DIN 53541-1980 |
生橡胶和弹性体的检验.通过测量硬度来测定结晶效应 |
(Rubber; determination of crystallization effects by hardness measurements) |
DIN 53543-1979 |
半硬聚氨脂(PUR)完整表皮泡沫塑料.鞋底和鞋部件用材料 |
(Testing of Semi-Rigid Polyurethne (PUR) Integral Cellular Materials; Materials for Soles and Parts of Shoes) |
DIN 53545-1990 |
生橡胶和弹性体的检验.弹性体低湿性能的测定.原理.检验方法 |
(Testing of rubber; determination of low temperature behaviour of rubber; principles and testing) |
DIN 53546-1980 |
弹性体的检验.有冲击应力时冷脆化温度的测定 |
(Testing of rubber; impact test for the determination of the low-temperature brittleness point) |
DIN 53548-1983 |
生橡胶和弹性体的检验.按照Gehman检验法通过模量--温度测量来测定弹性体冻结性能 |
(Testing of rubber; determination of the freezing behaviour of vulcanized rubbers by moduls-temperature measurement (Gehman test)) |
DIN 53552-1977 |
炭黑检验.炭黑灼烧时挥发成分的测定 |
(Testing of Carbon Black; Determination of the Amount of Components of Carbon Black that are Volatile on Heating) |
DIN 53563-1998 |
乳胶的检验.干燥物料含量的测定 |
(Testing of latex - Determination of total solids content) |
DIN 53579-1-1987 |
软弹性泡沫塑料的检验.成品的硬度检验.模制件的压入试验 |
(Testing of flexible cellular materials; hardness test on finished parts; indentation test on shaped parts) |
DIN 53579-2-1985 |
软弹性泡沫塑料的检验.成品的硬度检验.异性棒材的可压缩性 |
(Testing of flexible cellular materials; hardness test of finished parts; compressibility of profiles) |
DIN 53582-1983 |
炭黑测定.磺吸收值的测定 |
(Testing of carbon black; determination of iodine adsorption number) |
DIN 53583-1988 |
生橡胶和弹性体的检验.细粒比的测定和炭黑压制粒磨损测定 |
(Testing of rubber; determination of fines content and of loss in mass by abrasion of pelletized carbon black) |
DIN 53584-1977 |
炭黑测定.硫含量测定 |
(Testing of Carbon Black; Determination of the Sulphur Content) |
DIN 53586-1988 |
炭黑检验.炭黑燃烧残渣的测定 |
(Testing of carbon black; determination of residue on ignition of carbon black) |
DIN 53594-1981 |
生橡胶和弹性体的检验.乳胶的检验.筛湘的测定 |
(Testing of rubber; testing of latex, determination of sieve residue) |
DIN 53595-3-1981 |
生橡胶和弹性体的检验.天然橡胶-乳胶的要求和检验.用蒸浓法浓缩天然橡胶-乳胶 |
(Testing of rubber - Requirements and test methods for natural rubber latex - Natural rubber latex concentrated by evaporation) |
DIN 53597-1972 |
乳胶.比重的测定 |
(Latex; Determination of Density) |
DIN 53598-1-1983 |
用弹性体和塑料检验的示例对抽样进行统计评价 |
(Statistical evaluation at off-hand samples with examples from testing of rubbers and plastics) |
DIN 536-1-1991 |
起重机轨道.尺寸.静态值.带A型底翼缘的起重机轨道用钢的品种 |
(Craine rails; dimensions, sectional properties, steel grades for crane rails with foot flange, form A) |
DIN 536-2-1974 |
起重机轨道.F型(扁形).尺寸.静载荷.钢品种 |
(Crane Rails, Type F (Flat); Dimensions, Static Values, Steel Grades) |
DIN 53600-1976 |
炭黑测定.橡胶工业用粒状炭黑容积密度的测定 |
(Testing of Carbon Blacks; Determination of the Bulk Density of Pelletized Carbon Blacks for Use in the Rubber Industry) |
DIN 53601-1978 |
炭黑测定.炭黑对邻苯二甲酸二丁酯吸收的测定 |
(Testing of Carbon Blacks; Determination of the Dibutylphthalate Absorption of Carbon Blacks) |
DIN 53603-1981 |
炭黑测定.单珠硬度测定 |
(Testing of carbon blacks - Determination of pellet hardness) |
DIN 53604-1986 |
炭黑测定.珠炭黑中灰尘含量测定 |
(Testing of carbon black; determination of dust content of pelletized carbon black) |
DIN 53675-1981 |
生橡胶和弹性体的检验.乳胶的检验.含苯乙烯的橡胶乳胶中挥发性非饱和化合物的测定 |
(Testing of rubber; testing of latex; determination of volatile unsaturates) |
DIN 53704-1988 |
塑料的检验.酚醛塑料模塑材料中游离酚醛含量的测定.用光度测定法测定 |
(Testing of plastics; determination of the free phenol in phenolic moulding materials; photometrical method) |
DIN 53715-1991 |
塑料的检验.卡尔·弗歇尔滴定法测定水含量 |
(Testing of plastics; determination of water content by titration according to Karl Fischer) |
DIN 53728-3-1985 |
塑料的检验.稀释溶液中聚对苯-甲酸乙-醇酯(PETP)或聚对苯-甲酸丁-酯(PETP)的粘度值的测定 |
(Testing of plastics; determination of the viscosity number of polyethylene terephthalate (PETP) or polybutylene terephthalate (PBTP) in dilute solution) |
DIN 53733-1976 |
塑料的检验.检验用粉碎塑料制品 |
(Testing of Plastics; Size Reduction of Plastic Products for Test Purposes) |
DIN 5374-1974 |
机械制造用转速计 |
(Revolution counter for mechanical engineering) |
DIN 53741-1971 |
塑料的检验.用气体色谱法测定聚苯乙烯中挥发性芳香碳氢化合物 |
(Testing of Plastics; Determination of Volatile Aromatic Hydrocarbons in Polystyrene; Gas chromatographic Method) |
DIN 53742-1971 |
塑料的检验.用红外光谱法测定氯乙烯和醋酸乙烯酯共聚物中醋酸乙烯酯含量 |
(Testing of Plastics; Determination of the Vinyl Acetate Content of Copolymers of Vinyl Chloride and Vinyl Acetate; Infrared Spectrographic Method) |
DIN 53743-1979 |
塑料的检验.用气相色谱法测定聚氯乙烯(PVC)中的氯乙烯(VC) |
(Testing of plastics; gaschromatographical determination of vinyl chloride (VC) in polyvinyl chloride (PVC)) |
DIN 53746-1990 |
塑料的检验.聚酰胺的检验证明 |
(Testing of plastics; proof of polyamides) |
DIN 53748-1970 |
酚醛--甲醛树脂.酚醛塑料--模塑材料和模制材料的化学分析 |
(Chemical Analysis of Phenol-formaldehyde Resins; Phenoplastic Moulding Materials and Moulded Materials) |
DIN 53749-1970 |
尿素树脂.硫脲树脂和蜜胺--甲醛树脂.氨基塑料--模塑材料和氨基塑料模制材料的化学分析 |
(Chemical Analysis of Urea-, Thiourea- and Melamine-formaldehyde Resins and Aminoplastic Moulding Materials in the Moulded and Unmoulded State) |
DIN 5375-1974 |
机械制造用转数计指针 |
(Revolution speed indicator for mechanical engineering) |
DIN 53752-1980 |
塑料的检验.线型热膨胀系数的测定 |
(Testing of plastics; determination of the coefficient of linear thermal expansion) |
DIN 53754-1977 |
塑料的检验.用砂轮法测定磨损 |
(Testing of plastics; determination of abrasion, abrasive disk method) |
DIN 53755-1974 |
塑料制品的检验.在有热负荷及外部机械应力的条件下的贮存试验 |
(Testing of plastics articles; storage test with thermal and external mechanical stress) |
DIN 53756-1974 |
塑料制品的检验.有化学作用的情况下的贮存试验 |
(Testing of plastics; storage test in contact with chemicals) |
DIN 53757-1977 |
塑料制品的检验.运输容器和贮存容器的持久堆垛试验 |
(Testing of plastics articles; determination of the behaviour by stacking by long-time-test, boxes for transport and storage) |
DIN 53758-1975 |
塑料制品的检验.空心体的短时间内压力试验 |
(Testing of plastics articles; determination of the effect of internal pressure on hollow objects by short-time test) |
DIN 53759-1975 |
塑料制品的检验.空心体的持久内压力试验 |
(Testing of plastics articles; determination of the effect of internal pressure on hollow objects by long-time test) |
DIN 5376-1974 |
机械制造用转速传感器 |
(Revolution speed transmitters for mechanical engineering) |
DIN 53760-1977 |
塑料制品的检验.检验能力.检验标准 |
(Testing of plastics articles; practicability of testing, criteria for testing) |
DIN 53764-1992 |
塑料试验.松散的热固性塑料.流动和弯曲特性的试验方法 |
(Testing of plastics; pourable thermosettings; test method for flow and cure properties) |
DIN 53766-1-1991 |
玻璃纤维增强塑料制仪器和容器.端面拉伸试验中粘附强度的测定 |
(Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength) |
DIN 53768-1990 |
玻璃纤维增强塑料的长期失效性能测定用外推法 |
(Determination by extrapolation of the long-term behaviour of glass fibre reinforced plastics) |
DIN 53769-1-1988 |
玻璃纤维增强塑料管道检验.相当于B型管.管道零件粘附抗剪强度的测定 |
(Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings) |
DIN 53769-2-1986 |
玻璃纤维增加塑料管道检验.管道持久内压试验 |
(Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test) |
DIN 53769-3-1988 |
玻璃纤维增强塑料管道检验.管子短时间和长时间最大压力试验 |
(Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness) |
DIN 53769-6-1989 |
玻璃纤维增强塑料管道检验.管子和管道零件的内压脉动试验 |
(Testing of glass fibre reinforced plastics pipes; Testing of pipes and fittings under pulsating internal pressure) |
DIN 5377-1974 |
机械制造用转速计.转速传感器的连接与附件 |
(Connections and accessories for revolution counters and revolution speed transmitters for mechanical engineering) |
DIN 53770-1-1988 |
颜料的检验.盐酸可溶物质成分的测定.酸萃取物的制备 |
(Testing of pigments and extenders; determination of matter soluble in hydrochloric acid; preparation of acid extracts) |
DIN 53770-10-1978 |
颜料的检验.盐酸可溶物质成份的测定.铜含量 |
(Testing of pigments; determination of matter soluble in hydrochloric acid, copper content) |
DIN 53770-11-1978 |
颜料的检验.盐酸可溶物质成份的测定.锰含量 |
(Testing of pigments; determination of matter soluble in hydrochloric acid, manganese content) |
DIN 53770-12-1977 |
颜料的检验.盐酸可溶物质成份的测定.镍含量 |
(Testing of pigments; determination of matter soluble in hydrochloric acid, nickel content) |
DIN 53770-13-1976 |
颜料的检验.盐酸可溶物质成份的测定.汞含量 |
(Testing of pigments; determination of matter soluble in hydrochloric acid, mercury content) |