标准号 |
中文名称 |
英文名称 |
DIN 50982-3-1987 |
涂层厚度测量.一般工作原理.方法的选择及测量的实施 |
(Principles of coating thickness measurement; selection criteria and basic measurement procedures) |
DIN 50986-1979 |
涂层厚度测量.测量涂层及类似的涂覆层厚度的锥形剖面法 |
(Measurement of coating thickness; Wedge cut method for measuring the thickness of paints and related coatings) |
DIN 50988-2-1988 |
涂层厚度测量.测量从单位钢铁面上溶化的锌.锡涂层金属量容量分析法 |
(Measurement of coating thickness; determination of the mass per unit area of zinc and tin-coatings on ferrous materials by dissolution of the coating material; volumetric method) |
DIN 50990-1993 |
层厚测量.用原子吸收光谱测量法金属镀层单位面积质量 |
(Measurement of coating thickness; determination of the mass per unit area of metallic coatings by atomic absorption spectrometric method; flame method, F AAS) |
DIN 50991-1997 |
电解涂层.镀铬槽用三氧化铬.要求和检验 |
(Electroplated coatings - Chromtrioxide for chromium baths - Requirements and testing) |
DIN 50992-1-2002 |
覆层厚度测量和有表面波的表面的表征.第1部分:激光感应超声表面波法评定各层的弹性常数、质量密度和厚度 |
(Tickness measurement of coatings and characterising of surfaces with surface waves - Part 1: Evaluation of elastic constants, mass density and thickness of layers by laser-inducted ultrasonic surface waves) |
DIN 50992-2-2002 |
覆层厚度测量和有表面波的表面的表征.第2部分:光热法测量覆层厚度 |
(Tickness measurement of coatings and characterisation of surfaces with surface waves - Part 2: Thickness measurement of coatings by photothermic method) |
DIN 50993-1-2005 |
腐蚀保护层中六价铬的测定.第1部分:定性分析 |
|
DIN 51001 Bb.1-2003 |
氧化原材料和基础材料的试验.X射线荧光法(XRF)工作的一般基础.XRF试样测定用材料组分解法的一般测量 |
(Testing of oxidic raw materials and basic materials - General bases of work for X-ray fluorescence method (XRF) - General survey on disintegration methods referred to groups of materials for the determination of test specimens for XRF) |
DIN 51001-1 Bb.1-1987 |
检验氧化原材料.X射线分析法(RFA).有关材料组分解程序 |
(Testing of oxidic materials; x-ray fluorescence method; disintegration methods referred to groups of materials) |
DIN 51001-1-1983 |
对氧化原料及材料的检验.X射线荧光分析法(RFA).一般工作基础 |
(Testing of oxidic materials; X-ray fluorescence method; general bases of work) |
DIN 51001-2003 |
氧化原材料和基础材料的检验.X射线荧光法的一般工作基础 |
(Testing of oxidic raw materials and basic materials - General bases of work for X-ray fluorescence method (XRF)) |
DIN 51002-1-2004 |
电感耦合等离子体质谱法.第1部分:准则和定义 |
|
DIN 51003-2004 |
全反射X-射线荧光.总则和定义 |
|
DIN 51004-1994 |
热分析(TA).用差值热分析法(DTA)测定晶体材料的溶化温度 |
(Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis) |
DIN 51005-1993 |
热分析(TA)概念 |
(Thermal analysis; terms) |
DIN 51006-1990 |
热分析(TA).热解重量分析法(TG).原理 |
(Thermal analysis; thermogravimetry; principles) |
DIN 51006-2005 |
热分析(TA).热解重量分析法(TG).原理 |
|
DIN 51006-2005 |
热分析(TA).热解重量分析法(TG).原理 |
|
DIN 51007-1994 |
热分析(TA).差值热分析(DTA).原理 |
(Thermal analysis; differential thermal analysis; principles) |
DIN 51008-1 Bb.1-2004 |
发射光谱测定分析(OES).第1部分:火花和低压放电系统术语.解释 |
|
DIN 51008-1-2004 |
发射光谱测定分析(OES).火花和低压放电系统术语 |
|
DIN 51008-2-2001 |
发射光谱测定分析(OES).第2部分:火焰和等离子系统用术语 |
(Optical Emission Spectrometry (OES) - Part 2: Terms for flame and plasma systems) |
DIN 51009-2001 |
光学原子光谱分析.原理和定义 |
(Optical atomic spectral analysis - Principles and definitions) |
DIN 51010-1-1987 |
陶瓷原材料的检验;未成型耐火制品;交货检验 |
(Testing of ceramic materials; unshaped refractory materials; testing of materials as supplied) |
DIN 51010-2-1987 |
陶瓷原材料的检验;未成型耐火制品;试样的制造 |
(Testing of ceramic materials; unshaped refractory materials; preparation of test pieces) |
DIN 51010-3-1987 |
陶瓷原材料的检验;未成型耐火制品;室温下未焙烧试样性能特征的检验 |
(Testing of ceramic materials; unshaped refractory materials; testing of the characteristics of unfired test pieces at room temperature) |
DIN 51010-4-1987 |
陶瓷原材料的检验.未成型耐火制品.正在焙烧或焙烧后的试件性能特征的检验 |
(Testing of ceramic materials; unshaped refractory materials; testing of the characteristics of test pieces during or after firing) |
DIN 51028-1998 |
防空洞通风用滤砂的检验.气流阻力的测定 |
(Testing of filter sands for air-raid shelter ventilation - Determination of flow resistance) |
DIN 51030-1954 |
陶瓷原材料的检验.干燥弯曲强度的测定 |
(Testing of ceramic raw materials and materials; determination of the dry bending strength) |
DIN 51032-1986 |
陶瓷.玻璃.玻璃陶瓷.搪瓷.日用品中铅和镉逸出量的极限值 |
(Ceramics, glass, glass ceramics, vitreous enamels; permissible limits for the release of lead and cadmium from articles intended for use in contact with foodstuffs) |
DIN 51043-1979 |
粗面凝灰岩.要求.试验 |
(Trass; Requirements, Tests) |
DIN 51045-1-1989 |
在热作用下固体长度变化的测定.原理 |
(Determination of the thermal expansion of solids; principless) |
DIN 51045-2-1976 |
在热作用下固体长度变化的测定.焙烧的细陶瓷材料的检验 |
(Determination of the change of length of solids by thermal effect; testing of fired fine ceramic materials) |
DIN 51045-3-1976 |
在热作用下固体长度变化的测定.未焙烧的细陶瓷材料的检验 |
(Determination of the change of length of solids by thermal effect; testing of non-fired fine ceramic materials) |
DIN 51045-4-1976 |
在热作用下固体长度变化的测定.焙烧过的粗陶瓷材料的检验 |
(Determination of the change of length of solids by thermal effect; testing of fired ordinary ceramic materials) |
DIN 51045-5-1976 |
在热作用下固体长度变化的测定.未焙烧的粗陶瓷材料的检验 |
(Determination of the change of length of solids by thermal effect; testing of non-fired ordinary ceramic materials) |
DIN 51050-2000 |
密度成型耐火产品的试验方法.化学法粘合的碱性砖中间层的冷挤压强度的测定 |
(Methods for tests for dense shaped refractory products - Determination of cold crushing strength of the intermediate zone of chemically bonded basic bricks) |
DIN 51060-2000 |
耐火陶瓷原材料和耐火产品.耐火术语的定义,高耐火性 |
(Refractory ceramic raw materials and refractories - Definitions of the terms refractory, high refractory) |
DIN 51061-2-1978 |
陶瓷原材料的检验.取样.陶瓷原料和未成型耐火制品 |
(Testing of ceramic raw and finished materials; sampling, ceramic raw materials and unshaped refractory products) |
DIN 51061-2-2004 |
陶瓷原材料和成品的检验.第2部分:陶瓷原材料的抽样 |
|
DIN 51061-3-1973 |
陶瓷原材料的检验;取样.耐火砖 |
(Testing of ceramic raw and finished materials; sampling, refractory bricks) |
DIN 51064-1981 |
陶瓷原材料和半成品材料的检验.耐火砖加压耐火性(DFB)的测定 |
(Testing of ceramic raw and semi-finished materials; determination of fire resistance of refractory bricks under load (DFB)) |
DIN 51068-1-1976 |
陶瓷原材料的试验.用耐火砖水激冷法测定热冲击抗力 |
(Testing of ceramic materials; Determination of Resistance to Thermal Shock; Water quenching method for refractory bricks) |
DIN 51069-2-1972 |
陶磁原料和材料检验.高温下抗固体和体物质侵蚀的防火材料的比较检验.坩埚法 |
(Testing of ceramic materials; comparing test of the resistance of refractory bricks to the attack of solid and liquid materials at high temperature, crucible method) |
DIN 5107-1992 |
锻工凿.冷凿 |
(Blacksmith` chisels (cold chisels)) |
DIN 51074-1-1971 |
陶瓷原材料的检验.含氧化铬的陶瓷原材料的化学分析.一般数据和检验报告 |
(Testing of ceramic materials; chemical analysis of ceramic materials containing chromium oxide, general instructions and test report) |
DIN 51074-2-1971 |
陶瓷原材料的检验.用增溶法和氧化硅测定法对含氧化铬的陶瓷原材料进行化学分析 |
(Testing of ceramic material; chemical analysis of ceramic materials containing chromium oxide, methods of dissolution) |
DIN 51074-3-1971 |
陶瓷原材料的检验.用氧化铬测定法对含氧化铬的陶瓷原材料进行化学分析 |
(Testing of ceramic materials; chemical analysis of ceramic materials containing chromium oxide, determination of chromic oxide) |
DIN 51074-4-1971 |
陶瓷原材料的检验.用氧化钙测定法对含氧化铬的陶瓷原材料进行化学分析 |
(Testing of ceramic materials; chemical analysis of ceramic materials containing chromium oxide, determination of calcium oxide) |
DIN 51075-1-1982 |
陶瓷原材料的检验.碳化硅的化学分析.试样的制备.碳化硅含量的计算.检验报告 |
(Testing of ceramic materials; chemical analysis of silicon carbide; sample preparation and calculation of silicon carbide content) |
DIN 51075-2-1984 |
陶瓷原材料的检验.碳化硅的化学分析.游离碳含量的直接测定 |
(Testing of ceramic materials; chemical analysis of silicon carbide; direct determination of the free carbon content) |
DIN 51075-3-1982 |
陶瓷原材料的检验.碳化硅的化学分析.总含碳量的测定 |
(Testing of ceramic materials; chemical analysis of silicon carbide; determination of the total carbon content) |
DIN 51075-4-1982 |
陶瓷原材料的检验.碳化硅的化学分析.游离硅含量的测定 |
(Testing of ceramic materials; chemical analysis of silicon carbide; determination of the free silicon content) |
DIN 51075-5-1982 |
陶瓷原材料的检验.碳化硅的化学分析.游离碳含量的直接测定 |
(Testing of ceramic materials; chemical analysis of silicon carbide; indirect determination of the free carbon content) |
DIN 51076-1-1991 |
陶瓷原材料的检验.作为原材料的主要成份或次要成份的碳化硅的化学分析.用氧化成份和连接材料测量原料中碳化 |
(Testing of ceramic materials; chemical analysis of silicon carbide as main or minor constituent of ceramic materials; determination of SiC in materials with oxidic components and binding materials) |
DIN 51078-2002 |
陶瓷原材料和材料的检验.干燥时物质改变测定用试样制备和化学分析用试样制备 |
(Testing of ceramic raw materials and materials - Preparation of samples for the determination of change of mass during drying and for chemical analysis) |
DIN 51079-1-1991 |
陶瓷原材料的检验.作为原材料成份的碳化硅的化学分析.用碳酸钠和硼酸溶解 |
(Testing of ceramic materials; chemical analysis of silicon carbide used as raw material and as constituent in materials; decomposition with sodium carbonate and boric acid) |
DIN 51079-1-2004 |
陶瓷材料的检验.作为原材料和材料成分的碳化硅的化学分析.第1部分:用碳酸钠和硼酸分解 |
|
DIN 51079-2-1998 |
陶瓷原材料的检验.作为原材料和材料成份的碳化硅的化学分析.第2部分:用酸进行的压力分解 |
(Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 2: Pressure decomposition with acid) |
DIN 51079-2-2004 |
陶瓷材料的检验.作为原材料和材料成分的碳化硅的化学分析.第2部分:用酸进行的压力分解 |
|
DIN 5108-1992 |
泥瓦工用锤 |
(Masons` hammers) |
DIN 51081-2002 |
氧化原料和材料的检验.燃烧时的质量变化 |
(Testing of oxidic raw materials and materials - Determination of change in mass on ignition) |
DIN 51082-2003 |
陶瓷原材料和陶瓷材料的测试.不溶解粉末的悬浮液pH值的测定 |
(Testing of ceramic raw materials and ceramic materials - Determination of pH value of suspensions of non-soluble powders) |
DIN 51083-1-1998 |
陶瓷原材料的检验.细陶瓷硅酸铝的化学分析.一般数据和检验报告 |
(Testing of ceramic materials - Chemical analysis of alumosilicates - Part 1: General requirements, test report) |
DIN 51083-10-1988 |
陶瓷原材料的检验.细陶瓷硅酸铝的化学分析.钠氧化物.钾氧化物和锂氧化物的测定 |
(Testing of ceramic materials; chemical analysis of alumosilicates used for ceramics; determination of sodium oxide; potassium oxide and lithium oxide content) |
DIN 51083-11-1996 |
陶瓷原材料的检验.细陶瓷硅酸铝的化学分析.第11部分:用原子吸收光谱法测定氧化钡(BaO)和氧化锶(SrO) |
(Testing of ceramic materials - Chemical analysis of alumosilicates - Part 11: Determination of the barium oxide (BaO) and the strontium oxide (SrO) content by atomic absorption spectroscopy) |
DIN 51083-2-2000 |
陶瓷原材料的检验.第2部分:硅酸铝的化学分析.二氧化硅的测定 |
(Testing of ceramic materials - Part 2: Chemical analysis of alumosilicates, determination of silicium(IV)-oxide) |
DIN 51083-3-1992 |
陶瓷原材料的检验.细陶瓷硅酸铝的化学分析.分解法 |
(Testing of ceramic materials; chemical analysis of alumosilicates; decomposition methods) |
DIN 51083-3-2004 |
陶瓷材料的检验.硅酸铝的化学分析.第3部分:分解法 |
|
DIN 51083-4-1995 |
陶瓷原材料的检验.细陶瓷硅酸铝的化学分析.第4部分:氧化铝的测定 |
(Testing of ceramic materials - Chemical analysis of alumosilicates - Part 4: Determination of alumina) |
DIN 51083-4-2005 |
陶瓷原材料试验.铝硅酸盐的化学分析.第4部分:铝土的测定 |
|
DIN 51083-5-2003 |
陶瓷材料的检验.硅酸铝的化学分析.第5部分:二氧化钛的测定 |
(Testing of ceramic materials - Chemical analysis of alumosilicates - Part 5: Determination of titanium oxide) |
DIN 51083-6-1992 |
陶瓷原材料的检验.细陶瓷硅酸铝的化学分析.用原子吸收光谱法测定铁和锰的总含量 |
(Testing of ceramic materials; chemical analysis of alumosilicates; determination of the iron and manganese content by atomic absorption spectrometry) |
DIN 51083-7-2002 |
陶瓷原料和材料的检验.铝硅酸盐的化学分析.第7部分:氧化钙(CaO)的测定 |
(Testing of ceramic raw materials and materials - Chemical analysis of alumosilicates - Part 7: Determination of calcium oxide (CaO)) |
DIN 51083-8-1997 |
陶瓷原材料的检验.细陶瓷硅酸铝的化学分析.第8部分:用原子吸收光谱法测定氧化镁 |
(Testing of ceramic materials - Chemical analysis of alumosilicates - Part 8: Determination of magnesium oxide (MgO) by atomic absorption spectrometry) |
DIN 51083-9-1990 |
陶瓷原材料的检验.细陶瓷硅酸铝的化学分析.氧化磷钒的光度测定 |
(Testing of ceramic materials; chemical analysis of alumosilicates; photometric determination of the phosphorus-V-oxid content) |
DIN 51084-1990 |
陶瓷.玻璃.釉用氧化原材料的检验.氟化物含量的测定 |
(Testing of oxidic raw materials for ceramic, glass and glazes; determination of fluoride content) |
DIN 51085-1997 |
氧化原料和材料的检验.总体硫含量的测定 |
(Testing of oxidic raw materials and materials - Determination of total sulfur content) |
DIN 51086-1-1998 |
氧化原材料和塌陶瓷材料的试验,玻璃和釉料,第1部分:氧化硼的测定 |
(Testing of oxidic raw materials and materials for ceramics, glass and glazes - Part 1: Determination of boric oxide) |
DIN 51086-2-2004 |
氧化原材料及陶瓷、玻璃和釉料用材料的试验.用感应耦合等离子体光学发射光谱法测定Ag、As、B、Ba、Be、Bi、Ca、Cd、Ce、Co、Cr、Cu、Er、Eu、Fe、La、Mg、Mn、Mo、Nd、Ni、P、Pb、Pr、S、Sb、Se、Sn、Sr、Ti、V、W、Y、Yb、Zn和Zr |
|
DIN 51087-1-2005 |
氧化原料和成品试验.第1部分:用邻菲咯啉进行铁(II)和铁(III)的分光光度法测定 |
|
DIN 5109-2000 |
细木工用锤 |
(Joiners` hammers) |
DIN 51094-1996 |
陶瓷砖和陶磁板.墙面和地面铺砌用瓷砖和瓷板色泽的耐光性试验 |
(Ceramic tiles - Testing of the light fastness and colour fastness of ceramic tiles for walls and floors) |
DIN 51097-1992 |
地板铺面料检验.防滑性能测定.湿负荷的赤足范围.踩踏法.斜面 |
(Testing of floor coverings; determination of the anti-slip properties; wet-loaded barefoot areas; walking method; ramp test) |
DIN 51100-1957 |
陶瓷原材料的检验.用渗滤器法测定可溶性盐 |
(Testing of ceramic raw materials and materials; determination of the soluble salts (percolator method)) |
DIN 51102-1-1976 |
陶瓷原材料的检验.下水道陶瓷品块状试样耐酸性的测定 |
(Testing of ceramic materials; determination of the acid resistance, method with lumpy test material for clay for severage) |
DIN 51103-1975 |
陶瓷原材料的检验.耐碱性测定.粒化试件法 |
(Testing of ceramic materials; determination of the alkali resistance, method with grained test material) |
DIN 5111-1990 |
2.5kg以下锤子的木锤柄 |
(Timber handles for hammers up to 2 kg) |
DIN 51110-3-1993 |
高效陶瓷材料检验.4点弯曲试验.静态评估.威伯尔参数测定 |
(Testing of advanced technical ceramics; 4-point-bending test; statistical evaluation; determination of the Weibull-parameters) |
DIN 5112-1990 |
2kg以上锤子的木锤柄 |
(Timber handles for hammers above 2 kg) |
DIN 51130-1992 |
地板铺面料检验.防滑性能测定.高滑跌危险的工作间和工作区.踩踏法.斜面 |
(Testing of floor coverings; determination of the anti-slip properties; workrooms and fields of activities with raised slip danger; walking method; ramp test) |
DIN 51130-2004 |
地板覆盖物的试验.防滑性能测定.有滑跌危险的工作间和工作区.踩踏法.斜坡试验 |
|
DIN 5117-1992 |
快速螺纹夹钳 |
(Quick adjustable screw clamps) |
DIN 5117-2004 |
可调节的螺旋夹钳 |
|
DIN 51174-1988 |
搪瓷的检验.封闭系统腐蚀检验 |
(Corrosion testing of enamel in closed systems) |
DIN 51175-2000 |
玻璃质釉和瓷釉.通过快速试验法对热机械性能的测定 |
(Vitreous and porcelain enamels - Determination of thermomechanical properties by means of a rapid test method) |
DIN 51176-1-2003 |
玻化搪瓷和搪瓷.缺陷的表示和特性.第1部分:化学行业和容器用瓷漆 |
(睼itreous and porcelain enamels - Presentation and characterisation of defects - Part 1: Enamels for chemical service and vessels) |
DIN 51200-1985 |
材料试验机.硬度检验仪的试样夹紧装置的设计和应用 |
(Materials testing machines; design and application of test piece holding devices in hardness testing machines) |
DIN 51211-1978 |
金属材料检验.金属丝往复弯曲试验 |
(Testing of Metallic Materials; Reverse Bend Test of Wires) |
DIN 51212-1978 |
金属材料检验;金属丝的扭转试验 |
(Testing of Metallic Materials; Torsion Test of Wires) |
DIN 51214-1977 |
钢的检验.圆钢丝接点的拉力试验 |
(Testing of Steel; Tensile Test for Round Wires Using Knotted Specimens) |
DIN 51215-1975 |
金属材料的检验;金属丝的绕曲试验.一般数据 |
(Testing of Metallic Materials; Wrapping Test for Wires; General Information) |
DIN 51220-2003 |
材料试验机.材料试验机检验和校准的一般要求 |
(Materials testing machines - Generals for requirements and for verification and calibration of materials testing machines) |
DIN 51222-1995 |
金属材料检验.额定工作能力 |
(Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy50 J and verification) |
DIN 51230-1977 |
材料试验机.测定小试样弯曲强度及冲击韧性用动力静力仪 |
(Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens) |
DIN 51231-1-2001 |
材料试验机械.建筑构件的检验设备.第1部分:底板 |
(Material testing machines - Testing equipment for structural components - Part 1: Floor slabs) |
DIN 5128-1971 |
橡胶锤 |
(Rubber-mallets) |
DIN 51290-1-1991 |
机器制造业用反应性树脂混凝土的检验.术语 |
(Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; terminology) |
DIN 51290-2-1991 |
机器制造业用反应性树脂混凝土的检验.粘结剂.填充剂和可加工的混合剂的检验 |
(Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of binders, fillers and reaction resin compounds) |
DIN 51290-3-1991 |
机器制造业用反应性树脂混凝土的检验.单独制造的试样的检验 |
(Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of separatly manufactured specimens) |
DIN 51290-4-1991 |
机器制造业用反应性树脂混凝土的检验.生产过程中和成品部件的检验 |
(Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; in-process testing and testing of final parts) |
DIN 513-1-1985 |
米制锯齿螺纹.螺纹牙型 |
(Metric buttress threads; thread profiles) |
DIN 513-2-1985 |
米制锯齿螺纹.螺纹系列 |
(Metric buttress threads; general plan) |
DIN 513-3-1985 |
米制锯齿螺纹.偏差和公差 |
(Metric buttress threads; deviations and tolerances) |
DIN 5130-1974 |
铜锤 |
(Copper hammers) |
DIN 51302-2-2000 |
材料试验机.拉伸.加压和弯曲试验机的检验.建筑材料压力试验机的钩检验 |
() |
DIN 51308-1994 |
建筑业中施力装置和力测量装置的检验.夹紧装置.液压缸.夹紧测力计 |
(Verification of auxiliary devices for application and measuring of forces in building; clamp-devices, hydraulic cylinders, dynamometer for clamp aim) |
DIN 51308-2005 |
建筑中应用和测量力用辅助装置的验证.夹紧装置、液压缸、夹紧工具用功率计 |
|
DIN 51309-1998 |
材料试验机械.静扭矩测量装置的校正 |
(Materials testing machines - Calibration of static torque measuring devices) |