标准号 |
中文名称 |
英文名称 |
DIN 47409-1985 |
通信软线用折套管 |
(Protective sleeves against kinking for telecommunication cords) |
DIN 4741-1-1984 |
室内通风设备.聚丙烯管.最小壁厚的计算 |
(Ventilation plants; polypropylene (PP) pipes; calculation of the minimum wall thickness) |
DIN 4741-2-1987 |
室内通风设备.聚丙乙烯(PP)Ⅰ型通风管.管子异型件.弯头最小壁厚 |
(Ventilation plant; type 1 polypropylene (PP) uptakes; pipe fittings, bends; minimum wall thicknesses) |
DIN 4741-5-1988 |
室内通风设备.聚丙乙烯(PP)Ⅰ型通风管.非加固管道.最小壁厚 |
Ventilation plant; polypropylene (PP) pipes, type 1; non-reinforced ducts; minimum wall thickness |
DIN 47410-1986 |
通信设备和信息处理设备用软线.交货技术条件 |
(Cords for telecommunication systems and information processing systems; technical terms of delivery) |
DIN 47411-1981 |
带PVC绝缘套和编织护套.单芯式.防潮绞合通信软线 |
(Telecommunication cord with stranded wires; PVC-insulation and textil braided outer covering, single conductor, dampproof) |
DIN 47412-1-1981 |
带PVC绝缘套和PVC护套.单芯.防溅水的绞合通信软线 |
(Telecommunication cord with stranded wires, PVC-insulation and PVC outer covering, single conductor, sprayproof) |
DIN 47412-2-1981 |
带PVC绝缘套.无PVC护套.单芯.防潮湿空气的绞合通信软线 |
(Telecommunication cord with stranded wires; PVC-insulation without PVC-outer covering, single conductor, dampproof) |
DIN 47413-1981 |
带PVC绝缘套和编织护套对绞式防溅水型绞合通信软线 |
(Telecommunication cord with stranded wires; PVC-insulation and textil braided outer covering, paired conductors, dampproof) |
DIN 47414-1981 |
带PVC绝缘套和PVC护套对绞式防溅水型绞合通信软线 |
(Telecommunication cord with stranded wires; PVC-insulation and PVC outer covering, paired conductors, waterproof) |
DIN 47452-1981 |
带编织绝缘套单芯式用于干燥环境的绞合通信软线 |
(Telecommunication cord with tinsel wires; textil-insulation, single conductor, for indoor) |
DIN 47453-1981 |
用金属丝绞合线的通信软线.带织物绝缘套和护套.单芯.用于干燥的室内 |
(Telecommunication cord with tinsel wires; textil-insulation and textil braided outer covering, single conductor, for indoor) |
DIN 47460-1981 |
带PVC绝缘套和编织护套单芯式防潮型绞合通信软线 |
(Telecommunication cord with tinsel wires; PVC-insulation and textil braided outer covering, single conductor, dampproof) |
DIN 47461-1981 |
带PVC绝缘套和PVC护套单芯式防溅水型绞合通信软线 |
(Telecommunication cord with tinsel wire; with PVC-insulation and PVC outer covering, single conductor, sprayproof) |
DIN 47462-1981 |
带PVC绝缘套.单芯式.防溅水型金属绞合通领带领带信软线 |
(Telecommunication cord with tinsel wire; with PVC-insulation single conductor, twisted, sprayproof) |
DIN 47463-1981 |
带PVC绝缘套和PVC护套.单芯式.防溅水型金属.绞合通信软件 |
Telecommunication cord with tinsel wire; with PVC-insulation and PVC outer covering, single conductor, sprayproof |
DIN 47464-1986 |
通信设备用绕线话筒4 芯软线 |
Coiled handset cord for telecommunication devices; 4 wire |
DIN 4747-1-1991 |
区域供热设备和区域水暖供热网相连接的家用装置的安全技术要求 |
Heating plants for district heating; safety requirements on domestic installations to be connected to hot-water district heating pipes |
DIN 475-1-1984 |
螺钉扳手开口度.配件.管子配件 |
(Widths across flats for bolts, screws, valves and fittings) |
DIN 475-2-1982 |
螺钉和螺母用扳手的开口度 |
(Wrench and socket openings) |
DIN 475-3-1987 |
扳手的开口度.双端扳手 |
(Size pairing of double ended wrenches) |
DIN 4750-1993 |
允许蒸汽压力0.5巴以下的蒸汽锅炉和加热设备中蒸汽室用立管的要求 |
Requirements for vertical pipes for steam rooms in steamboilers and heating plants guarding against steampressure of 0,5 bar |
DIN 4751-1-1994 |
水暖设备.水温达120℃的开式和闭式物理保护供暖设备.安全技术装备 |
(Medium Temperature Hot Water Systems (MTHWS) with a boiler flow temperature up to 120 C - Specification for open systems and sealed systems with pressurisation by gravity using a column of water or by safety valves - Safety equipment) |
DIN 4751-2-1994 |
水暖设备.水温达120℃闭式恒温保安供暖设备.安全技术装备 |
Medium Temperature Hot Water Systems (MTHWS) with a boiler flow temperature up to 120 C - Specification for sealed systems using thermostatic control - Safety equipment |
DIN 4751-3-1993 |
水暖设备.水温达95℃带强制循环额定热功率50kW的闭式恒温保安的供暖设备.安全技术设备 |
(Medium Temperature Hot Water Systems (MTHWS) with a boiler flow temperature up to 95 C and forced flow boilers with rated output up to 50 kW; specification for sealed systems using thermostatic control; safety equipment) |
DIN 4753-1-1988 |
饮用水和工业用水的热水装置.要求.标记.装备和检验 |
(Water heaters and water heating installations for drinking water and service water; requirements, marking, equipment and testing) |
DIN 4753-10-1989 |
饮用水和工业用水的热水装置.无涂层钢容器的阴极防腐蚀.要求和检验 |
(Water heating installations for drinking water and service water; cathodic corrosion protection of uncoated steel vessels; requirements and testing) |
DIN 4753-11-1990 |
饮用水和工业用水的热水装置.中间介质热交换器.要求.检验.标记 |
(Water heaters and hot water systems for drinking and service water; indirect heat exchangers; requirements, testing and marking) |
DIN 4753-2-1984 |
饮用水和工业用水的热水装置.热水器和热水设备记录的处理工艺 |
(Water heating installations for drinking water and for water for industrial purposes; procedure of registration of water heaters and of water heating installations) |
DIN 4753-3-1993 |
饮用水和工业用水的热水装置和水加热设备.水面涂釉防腐.要求和检验 |
(Water heaters and water heating installations for potable water and for service water; corrosion protection on the water side by enamelling; requirements and testing) |
DIN 4753-4-1994 |
饮用水和工业用水的热水装置.触水面用合成树脂加热硬化而成的防腐蚀.要求和检验 |
(Water heaters and water heating installations for drinking water and service water - Part 4: Corrosion protection on the water side by means of hot-setting, duroplastic coating materials; requirements and testing) |
DIN 4753-5-1994 |
饮用水和工业用水的热水装置.触水面用天然或合成橡胶防腐蚀的衬铺薄膜.要求和检验 |
(Water heaters and water heating installations for drinking water and service water - Part 5: Corrosion protection on the water side by means of foil coating made from natural or synthetic rubber; requirements and testing) |
DIN 4753-6-1986 |
饮用水和工业用水的热水装置.搪瓷钢容器阴级的防腐蚀.要求和检验 |
(Water heating installations for drinking water and service water; cathodic corrosion protection of enamelled steel containers; requirements and testing) |
DIN 4753-7-1988 |
饮用水和工业用水的热水装置.用抗腐蚀金属材料作触水面的防腐蚀.要求和检验 |
(Water heaters and water heating installations for drinking water and service water; corrosion protection on the water side by corrosion-resistant metallic materials; requirements and testing) |
DIN 4753-9-1990 |
饮用水和工业用水的热水装置.用热塑涂层材料作触水面的防腐蚀.要求和检验 |
(Water heaters and water heating installations for drinking water and service water; corrosion protection on the water side by means of thermoplastic coating materials; requirements and testing) |
DIN 4754-1994 |
以有机液体为载体的传热设备.安全技术要求.检验 |
(Heat transfer installations working with organic heat transfer fluids - Safety requirements, test) |
DIN 4755-1-1981 |
燃油设备.采暖设备的燃油装置.安全技术要求 |
(Oil firing installations; Oil firing equipment for central heating systems; Technical safety requirements) |
DIN 4755-2-1984 |
燃油设备.燃料油的供给.燃料油供给设备安全技术要求.检验.GSG标志 |
(Oil burning installations; fuel oil supply, fuel oil supply systems; safety requirements, testing) |
DIN 4755-2004 |
燃油设备.燃油装置的技术规定.检验 |
|
DIN 4757-2-1980 |
带有机载热体的太阳能加热装置.对安全技术结构的要求 |
(Solar heating plants operating on organic heat transfer media; Requirements relating to safe design and construction) |
DIN 4757-4-1982 |
太阳能加热装置.太阳能聚热器效率.热量及压降的测定 |
(Solar heating plants; Solar collectors; Determination of efficiency, heat capacity and pressure drop) |
DIN 4759-1-1986 |
多种能源产热设备.固体燃料.油和气体燃料及共用一个烟囱的锅炉.安全要求和检验 |
(Process heat installations for more than one kind of energy; one boiler for solid fuel and one for oil or gas and only one chimney; safety requirements and tests) |
DIN 476-2-1991 |
纸张成品规格.C系列 |
(Trimmed sizes of paper; C serie) |
DIN 4760-1982 |
几何形状偏差.概念.分级系统 |
(Form deviations; Concepts; Classification system) |
DIN 47600-1-1974 |
电压10KV以下电力电缆用金属铸造连接套.保护连接套 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Protective Joint Boxes) |
DIN 47600-2-1974 |
10KV以下电力电缆用金属铸造连接套.内套 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Joint Boxes) |
DIN 47600-3-1974 |
10KV以下电力电缆用金属铸造连接套.纸绝缘电缆连接套的配置.铜绞线连接的配置 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Paper-insulated Cables; Correlation of Bare Stranded Copper Bonding Wire) |
DIN 47600-4-1974 |
10KV以下电力电缆用金属铸造连接套.纸绝缘电缆的内部结构 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for Paper-insulated Cables) |
DIN 47600-5-1974 |
10KV以下电力电缆用金属铸造连接套.纸绝缘电缆的安装说明 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Installation Instructions for Paper-insulated Cables) |
DIN 47600-6-1974 |
10KV以下电力电缆用金属铸造连接套.0.6/1KV塑料绝缘电缆连接套的配置 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Plastic Insulated Cables 0.6/1 kV) |
DIN 47600-7-1974 |
10KV以下电力电缆用金属铸造连接套.1.6/1KV塑料绝缘电缆的内部结构 |
(Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for Plastic Insulated Cables 0.6/1 kV) |
DIN 47606-1974 |
10KV-30KV带单个屏蔽电缆芯线的电力电缆金属铸造连接套.保护套 |
(Joint boxes for power cables up to 30 kV; joint protection boxes) |
DIN 47608-1-1988 |
通信设备用带切断端子接触的端子板.尺寸.材料 |
(Terminal strip with insulation displacement contacts; for telecommunications sytems; dimensions, material) |
DIN 47608-2-1997 |
电信设备用带切断端子接触的端子板.第2部分:要求.检验 |
(Terminal strips with insulation displacement contacts for telecommunication systems - Part 2: Requirements, test) |
DIN 47609-1989 |
电信电缆.控制电缆及信号电缆用塑料制耐气候影响的分流器柜.要求.检验 |
(Cable distribution cabinets from plastic for outdoor use; requirements, tests) |
DIN 47611-1978 |
通信设备用端子板.尺寸 |
(Terminal block for telecommunication systems; dimensions) |
DIN 47612-1981 |
通信电缆终端系统计数方式 |
(Manner of counting at terminal systems for telecommunication cables) |
DIN 47613-1-1968 |
通信电缆用分线套管.铅套管 |
(Dividing boxes for telecommunication cables; lead sleeves) |
DIN 47613-2-1959 |
电缆配件.通信电缆用分线套管.铠装电缆用保护套管 |
(Cable accessories; branch-off sleeves for telecommunication cables, protected underground couplings for sheathed cables) |
DIN 47613-3-1959 |
电缆配件.通信电缆用分线套管.木罩 |
(Cable accessories; branch-off sleeves for telecommunication cables, wooden lining) |
DIN 47613-4-1959 |
电缆配件.通信电缆用分线套管.电缆卡圈 |
(Cable accessories; branch-off sleeves for telecommunication cables, cable clip) |
DIN 47613-5-1961 |
通信电缆用分线套管.电缆配置原则 |
(Branch-off sleeves for telecommunication cables; regulations for the allocation to the cables) |
DIN 47614-1975 |
通信设备用接线板 |
(Terminal strips for telecommunication systems) |
DIN 47615-1999 |
通信设备配电箱.尺寸,类型 |
(Distributionboxes for telecommunication systems - Dimensions, types) |
DIN 47616-1971 |
通信设备用接线板和端子板.要求.检验 |
(Flat connecting blocks and terminal strips for telecommunication systems; requirements, tests) |
DIN 47617-1975 |
带金属护套压气监控通信电缆的连接套.内套管 |
(Joint boxes for pressure gas supervised telecommunication cables, metal sheathed; internal joint boxes) |
DIN 47619-1-1979 |
通信电缆接头.对称绞合件电缆 |
(Splicing of telecommunication cables; cable with symmetrical stranding components) |
DIN 47622-1979 |
通信电缆连接套管用塑料护套管 |
(Plastic sleeves for telecommunication cable-connecting sleeves) |
DIN 47624-2001 |
金属导线或光纤通信电缆用塑料夹紧套管.要求和试验 |
(Clamping closures of plastics for telecommunication cables with metallic conductors and optical fibres - Requirements and tests) |
DIN 47625-1980 |
通信设备电缆终端配件组.频率范围4KHZ以下.要求.检验 |
(Cable terminal fitting for telecommunication systems, frequency range up to 4 kHz; requirements, tests) |
DIN 47626-1990 |
通信电缆外皮接线端子.要求.检验 |
(Sheath-clamps for telecommunication cables; requirements, tests) |
DIN 47627-1986 |
通信电缆套管内的非焊接芯线连接.要求.检验 |
(Solderless coreconnections in sleeves for telecommunication cables; requirements, tests) |
DIN 47628-1-1983 |
通信电缆用热塑性紧固套.尺寸 |
(Thermoplastic-clamping sleeves for telecommunication cables; dimensions) |
DIN 47628-2-1983 |
通信电缆用热塑性紧固套.电缆的配置 |
(Thermoplastic-clamping sleeves for telecommunication cables; allocation to the cables) |
DIN 47629-1986 |
通讯电缆终端用压缩空气密封闭锁.要求.检验 |
(Pressure-tight blockstops for telecommunication cables; requirements, tests) |
DIN 47630-1-1972 |
1KV以下金属铸造材料制室内连接套管.尺寸 |
(House junction boxes up to 1000 V; dimensions) |
DIN 47630-10-1972 |
1KV以下金属铸造材料制室内连接套管.用于NYY配电电缆和NYY室内连接电缆的内部结构 |
(House junction boxes up to 1000 V; inner design for distribution cable NYY and house junction cable NYY) |
DIN 47630-11-1972 |
1KV以下金属铸造材料制室内连接套管.用于NYY配电电缆和NYY室内连接电缆的安装说明 |
(House junction boxes up to 1000 V; installation instruction for distribution cable NYY and house junction cable NYY) |
DIN 47630-2-1972 |
1KV以下金属铸造材料制室内连接套管.用于NKBA配电电缆和NKBA室内连接电缆的内部结构 |
(House junction boxes up to 1000 V; inner design for distribution cable NKBA and house junction cable NKBA) |
DIN 47630-3-1972 |
1KV以下金属铸造材料制室内连接套管.用于NKBA配电电缆和NKBA室内连接电缆的安装说明 |
(House junction boxes up to 1000 V; installation instructions for distribution cable NKBA and house junction cable NKBA) |
DIN 47630-4-1972 |
1KV以下金属铸造材料制室内连接套管.用于NKBA配电电缆和NYCY室内连接电缆的内部结构 |
(House junction boxes up to 1000 V; inner design for distribution cable NKBA and house junction cable NYCY) |
DIN 47630-5-1972 |
1KV以下金属铸造材料制室内连接套管.用于NKBA配电电缆和NYCY室内连接电缆的安装说明 |
(House junction boxes up to 1000 V; installation instructions for distribution cable NKBA and house junction cable NYCY) |
DIN 47630-6-1972 |
1KV以下金属铸造材料制室内连接套管.用于NAKLEY配电电缆和NYCY室内连接电缆的内部结构 |
(House junction boxes up to 1000 V; inner design for distribution cable NAKLEY and house junction cable NYCY) |
DIN 47630-7-1972 |
1KV以下金属铸造材料制室内连接套管.用于NAKLEY配电电缆和NYCY室内连接电缆的安装说明 |
(House junction boxes, up to 1000 V; installation instructions for distribution cable NAKLEY and house junction cable NYCY) |
DIN 47630-8-1972 |
1KV以下金属铸造材料制室内连接套管.用于NYCWY配电电缆和NYCY室内连接电缆的内部结构 |
(House junction boxes up to 1000V; inner design for distribution cable NYCWY and house junction cable NYCY) |
DIN 47630-9-1972 |
1KV以下金属铸造材料制室内连接套管.用于NYCWY配电电缆和NYCY室内连接电缆的安装说明 |
(House junction boxes up to 1000 V; installation instruction for distribution cable NYCWY and house junction cable NYCY) |
DIN 47632-1-1978 |
1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.保护套管 |
(Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; joint protection boxes) |
DIN 47632-2-1978 |
1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.内套管 |
(Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal joint boxes) |
DIN 47632-3-1978 |
1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.导线截面的配置 |
(Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; allocation of conductor cross sections) |
DIN 47632-4-1978 |
1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.内部结构 |
(Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal construction) |
DIN 47633-1984 |
通信电缆设备中同轴副连接.要求.检验 |
(Coaxial splices in telecommunication cables; requirements, tests) |
DIN 47634-1984 |
通讯电缆用热塑塑料套管.要求.检验 |
(Plastic heat shrinking sleeves, for telecommunication cables; requirements, tests) |
DIN 47635-1973 |
金属铸件制电缆配件填料槽和凹槽 |
(Gasket grooves and folds for cast-metal cable fittings) |
DIN 47636-7-1990 |
外锥套形仪器连接件用电力电缆插套组合配件.Um可达36kV.仪器连接件和电缆插接件的安装尺寸 |
(Bushing for separable accessories for power cable with protruding cone; U up to 36 kV, dimensions of the arrangement for bushings and separable connectors) |
DIN 4764-1982 |
机械工程和精密制造技术用件的表面.与应力有关的概念 |
(Surfaces of components used in mechanical engineering and light engineering; Terminology according to stress conditions) |
DIN 47642-1975 |
配件用金属浇铸电缆卡圈 |
(Cast-metal cable sheathes for accessories) |
DIN 47643-1973 |
电缆配件用套管盖 |
(Boxlid for cable fittings) |
DIN 47645-1989 |
通信电缆用热收缩塑料制盖.要求.检验 |
(Plastic heat shrinking caps for telecommunication cables; requirements, tests) |
DIN 47650-1955 |
电缆附件.截面在400平方毫米以下的铜制或铝制圆线和扁线用连接焊接套管 |
(Cable accessories - Connecting soldering sleeves for round and sector conductors, of copper or aluminium, up to 400 mm cross section) |
DIN 47658-1975 |
铜和铝导线的房屋引入线连接套管的电缆分线端子 |
(Branch terminals in house connections for copper and aluminium conductors) |
DIN 47659-1975 |
截面为150mm2以下的波纹形同心铜导线接地端子 |
(Earthing connector for corrugated concentric copper-conductor up to 150 mm) |
DIN 47661-2-1973 |
塑料绝缘通信电缆用绝缘套管.线组环 |
(Insulation bushings, group rings for plastic insulated communication cables) |
DIN 4769-4-1974 |
粗糙度比较块.用磨料清洁的金属表面 |
(Roughness comparisons specimens; metallic surfaces, cleaning with abrasives) |
DIN 477-4-1982 |
气瓶阀.轻便储气瓶颈的止回阀 |
(Compressed gas cylinder valves; swing check valves for camping-cylinders) |
DIN 477-5-2002 |
气瓶阀.第5部分:最大试验压力为450巴气瓶阀.出口接头 |
(Gas cylinder valves - Part 5: For test pressure up to 450 bar max.; Outlet connections) |
DIN 47700-1985 |
绝缘电力电线.一览表.安全技术排线 |
(Cables, wires and flexible cords for power installation - Survey, assignment according to safety requirements) |
DIN 47703-1989 |
绝缘电力电线.NSGAOeU.NSGAFOeU和NSGAFCMOeV型特种橡皮单芯电线.尺寸.标志.重量和交货方式 |
(Cables, wires and flexible cords for power installation; Special rubber; Insulated single - Core cable NSGA橴, NSGAF橴 and NSGAFCM橴 - Dimensions, designation, weights and packaging-requirements) |
DIN 47705-1989 |
绝缘电力电线.NYM型聚氯乙烯护套线.尺寸.标志.重量和交货方式 |
(Cables, wires and flexible cords for power installation - PVC-sheathed cable NYm - Dimensions designation, weights and packaging, requirements) |
DIN 47707-1970 |
按VDE0250的绝缘电力电线.NYRUZY型卷边护套线.用途.尺寸.重量 |
(Thermoplastic covered metal sheathed cables NYRUZY) |
DIN 47708-1970 |
按VDE0250的绝缘电力电线.NYBUY型铅护套电线.用途.尺寸.重量 |
(Lead sheathed cables NYBUY) |
DIN 47715-1970 |
按VDE0250的绝缘电力电线.NYJF.NYJFY型带形线.用途.尺寸.重量 |
(Thermoplastic insulated and rubber covered flat cables NYJF, NYJFY) |
DIN 47720-1970 |
按VDE0250的绝缘电力电线.NFYW型耐气侯性塑料绝缘线.用途.尺寸.重量 |
(Weatherproof thermoplastic insulated cables NFYW) |
DIN 47721-1970 |
按VDE0250的绝缘电力电线.NSHCOEU型屏蔽重型橡胶套软线.用途.尺寸.重量 |
(Screened heavy duty, tough-rubber sheathed flexible cables NSHCoeu) |
DIN 47724-1-1970 |
按VDE0250的绝缘电力电线.NYFAW.NYFAFW型耐高温塑料灯头线.用途.尺寸.重量 |
(Thermoplastic insulated heat resisting wires and flexible cords for lighting fittings NYFAw, NYFAFw) |
DIN 47724-2-1970 |
按VDE0250的绝缘电力电线.NYFAZW.NYFADW型耐高温塑料灯头线.用途.尺寸.重量 |
(Thermoplastic insulated heat resisting flexible cords for lighting fittings NYFAZw, NYFADw) |
DIN 47725-1970 |
按VDE0250的绝缘电力电线.NYPLYW型耐高温塑料吊灯软线.用途.尺寸.重量 |
(Thermoplastic insulated and sheathed heat resisting drop cord with reinforcing strand NYPLYw) |
DIN 47726-1983 |
绝缘电力电线.05V聚氯乙烯单芯线.尺寸.标记.重量和交货方式 |
(Insulated cables for power installation - PVC-single-core non-sheated cable 05V - Dimensions, designation, weights and packaging-requirement) |
DIN 47727-1983 |
绝缘电力电线.07V聚氯乙烯芯线.尺寸.标记.重量和交货方式 |
(Cables and flexible cords for power installation - PVC-single-core non-sheathed cable 07V - Dimensions, designation, weights and packaging-requirement) |
DIN 47728-1985 |
绝缘电力电线.05RR和05RRT橡胶护套软线.尺寸.标记.重量和交货方式 |
(Cables, wires and flexible cords for power installation - Rubber sheathed flexible cable 05RR and 05RRT - Dimensions, designation, weights and packaging-requirement) |
DIN 47729-1983 |
绝缘电力电线.05RN橡胶护套软线.尺寸.标记.重量和交货方式 |
(Cables, wires and flexible cords for power installation - Rubber sheathed flexible cable 05RN - Dimensions, designation, weights and packaging-requirement) |