标准号 |
中文名称 |
英文名称 |
DIN 6349-3-1978 |
带齿环螺纹销C型三爪钻夹头 |
(Key-Type Three-Jaw Drill Chucks, Form C, with Fastening by Threaded Pin) |
DIN 6349-4-1988 |
带齿环三爪钻夹头.啮合和扳手 |
(Key type three-jaw drill chucks; key and tooth system) |
DIN 6349-5-1978 |
键式的三爪钻夹.交货技术条件 |
(Key-Type Three-Jaw Drill Chucks; Technical Conditions of Delivery) |
DIN 635-1 Bb.1-1994 |
滚动轴承.单列调心球轴承.特性标志和简图 |
(Rolling bearings - Self-aligning roller bearings, single row - Geometric and characteristic) |
DIN 635-1-1987 |
滚动轴承.调心球轴承.单列 |
(Rolling bearings; single-row self-aligning roller bearings) |
DIN 635-2-1984 |
滚动轴承.调心球轴承.双列 |
(Rolling bearings; spherical roller bearings, double row) |
DIN 6350-1-1968 |
手动车床卡盘.带圆柱安装槽自定心卡盘 |
(Lathe Chucks, Hand-operated; Jaws not Individually Adjustable, with Cylindrical Mounting Recess) |
DIN 6350-2-1969 |
手动车床卡盘.带1:4锥度的自定心卡盘 |
(Lathe Chucks, Hand-operated; Jaws not Individually Adjustable, Mounting recess with 1 : 4 Taper) |
DIN 6351-1-1968 |
手动车床卡盘.带圆柱形安装槽的非自定心卡盘 |
(Lathe Chucks, Hand-operated; Jaws also Individually Adjustable with Cylindrical Mounting Recess) |
DIN 6351-2-1969 |
手动车床卡盘.带1:4安装槽的非自定心卡盘 |
(Lathe Chucks, Hand-operated; Jaws also Individually Adjustable, Mounting Recess with 1 : 4 Taper) |
DIN 6352-1-1968 |
带1:4定心锥的卡盘座板.安装法兰 |
(Chuck backplates with 1 : 4 Locating Taper; Basic Flanges) |
DIN 6353-1977 |
无通孔动力操作车床卡盘 |
(Lathe Chucks, Power-operated, without Trough-hole) |
DIN 6354-1980 |
全锥形铣刀芯轴 |
(Milling machine arbors with steep taper, complete) |
DIN 6355-1980 |
锥形铣刀芯轴 |
(Clamping Devices; Milling Machine Arbors with Taper) |
DIN 6356-1972 |
带内定心孔的铣刀盘用铣刀杆 |
(Centering arbors for milling cutters) |
DIN 6357-1988 |
内径定心铣头和面铣刀用的7:24锥柄的铣刀杆 |
(Holding arbors with taper shank 7/24 for milling cutters and face milling cutters with internal alignment) |
DIN 6358-1988 |
侧传动的圆柱柄的7:24锥度转接套筒 |
(Milling machine arbors with taper shank 7/24 for milling cutter with longitudinal or transverse drive) |
DIN 6359-1-1996 |
带有侧传动面和倾斜夹紧面的直柄用带7/24锥柄的减速套筒.第1部分:符合DIN2080-1要求的带7/24锥柄的A型套筒 |
(Reduction sleeves with 7/24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 1: Type A with 7/24 taper shank in accordance with DIN 2080-1) |
DIN 6359-2-1996 |
带有侧传动面和倾斜夹紧面的直柄用带7/24锥柄的缩径套管.第2部分:符合DIN69871-1要求的带7/24锥柄的B型套管 |
(Reduction sleeves with 7/24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 2: Type B with 7/24 taper shank in accordance with DIN 69871-1) |
DIN 636-1-1993 |
线性滚动轴承.动态和静态额定负荷.线性环形运动的球轴承 |
(Linear rolling bearings; dynamic and static load ratings; linear motion recirculating ball bearings) |
DIN 636-2-1993 |
线性滚动轴承.动承载量和静承载量.型轨球导向轴承 |
(Linear rolling bearings; dynamic and static load ratings; profile rail guide recirculating ball bearings) |
DIN 636-3-1994 |
线型滚动轴承.动态和静态承载量.无滚动件循环的线型槽 |
(Linear rolling bearings; dynamic and static load ratings; linear guides without rolling element recirculation) |
DIN 6360-1983 |
带纵槽的铣刀用大锥套的套式铣刀刀杆 |
(Milling machine arbors with 7/24 taper for milling cutters with longitudinal and transverse drive) |
DIN 6364-2000 |
带紧定螺纹的莫氏锥柄用7/24外锥柄异径连接套 |
(Reduction sleeves with external taper shank 7/24 for morse taper shank with tightening thread) |
DIN 63650-1976 |
粗梳毛纺工艺用环锭纺纱机.概念.结构原理 |
(Ring spinning frame for woollen spinning; terms and definitions; principles of construction) |
DIN 6366-1-1982 |
空心端铣刀横键传动爪环 |
(Clutch drive rings for shell end mill arbors) |
DIN 6366-2-1964 |
滚刀心轴用爪驱动环 |
(Clutch Drive Rings for Hob Arbors) |
DIN 6367-2003 |
套式铣刀刀杆用铣刀紧固螺丝 |
(Cutter retaining screws for milling machine arbors) |
DIN 6368-1999 |
铣刀拉紧螺丝的专用扳手 |
(Wrenches for cutter retaining screws) |
DIN 6369-1974 |
7:24锥度套筒紧固螺栓.夹具固定用螺纹段 |
(Draw-in Rods for Taper Reception; Threaded End for Tool Retention) |
DIN 6370-1957 |
夹具.机床用虎钳.夹紧范围.连接尺寸.允许偏差.夹紧虎钳 |
(Clamping Devices; Machine Vices, Capacities, Mating Dimensions, Permissible Variations, Jaws) |
DIN 63700-2000 |
纺织机械.棉纺工艺用环锭纺纱机.术语和定义.结构原理 |
(Textile machinery - Ring spinning machine for cotton spinning - Terms and definitions; principles of construction) |
DIN 6371-1999 |
夹具用C型转动垫圈 |
(Captive C-washer) |
DIN 6372-2002 |
夹紧和固定装置用C-型垫圈 |
(C-washer for jigs and fixtures) |
DIN 6374-1980 |
磨削心轴.装夹工件心轴 |
(Grinding machine mandrels) |
DIN 6376-1972 |
夹具的横撑 |
(Swing latch) |
DIN 6377-1973 |
夹紧槽 |
(Clamping slots) |
DIN 6378-1974 |
钩螺钉 |
(Clip Bolts) |
DIN 6379-1991 |
T型槽螺母用双头螺钉 |
(Studs for T-nuts) |
DIN 6379-2003 |
与T型槽螺母一起使用的螺柱 |
(Studs for use with tee nuts) |
DIN 6381-1962 |
锥柄的定心芯轴 |
(Aligning Arbors with Taper Shank) |
DIN 6382-1964 |
工具接长套筒 |
(Tool Extension Sockets) |
DIN 6384-1980 |
7:24锥度的镗头 |
(Boring heads with taper 7/24) |
DIN 6385-1980 |
7:24锥度的短钻杆 |
(Short boring bars with taper 7/24) |
DIN 6386-1-1977 |
车床卡盘.手动卡盘的交货技术条件 |
(Lathe chucks; technical conditions of delivery for hand operated lathe chucks) |
DIN 6386-2-1983 |
不带通孔的车床卡盘.机动卡盘的交货技术条件 |
(Lathe chucks, without through-hole; technical conditions of delivery for power operated lathe chucks) |
DIN 6388-1993 |
工具夹紧用1:10锥度的弹簧夹头.弹簧夹头.弹簧夹头座.夹紧螺母 |
(Collets for tool holder with taper ratio 1 : 10; collets, holder, nuts) |
DIN 6391-1990 |
夹紧刀具用.锥度为1:10的弹簧夹头的带锥柄的卡盘 |
(Chucks with taper shank 7/24 for collets for tool holder with taper 1:10) |
DIN 6393-1994 |
丝锥用快速更换插件.刚性 |
(Quick-change adapters for taps - Rigid) |
DIN 63950-1976 |
环锭捻线机.概念 |
(Ring doubling and twisting frame; terms and definitions) |
DIN 6397-1988 |
抹瓷砖用的镘刀 |
(Floortiling trowel) |
DIN 6403-1976 |
带盒的钢尺 |
(Measuring Tapes of Steel with Winder Frames or Winder Cases) |
DIN 64046-1995 |
带套管的锭杆.带套筒联轴节的锭杆.锥形筒管1:38(按DIN368) |
(Ring spindles with plugs with tube coupling for tubes with taper 1:38 according to DIN ISO 368) |
DIN 64047-1995 |
带套管的锭杆.带套筒联轴节的锭杆.锥形筒管1:64(按DIN368) |
(Ring spindles with plugs with tube coupling for tubes with taper 1:64 according to DIN ISO 368) |
DIN 6406-1966 |
吊环 |
(Loops) |
DIN 64074-2000 |
纺织机械.棉纺工艺用混合开包机.术语和定义.结构原理 |
(Textile machinery - Mixing bale opener for cotton spinning - Terms and definitions; principles of construction) |
DIN 64075-2000 |
纺织机械.棉纺工艺用棉箱给棉机.术语和定义.结构原理 |
(Textile machinery - Hopper feeder for cotton spinning - Terms and definitions; principles of construction) |
DIN 64076-2000 |
纺织机械.棉纺工艺用集棉器.术语和定义.结构原理 |
(Textile machinery - Condenser for cotton spinning - Terms and definitions; principles of construction) |
DIN 64078-1974 |
棉纺厂用的卧式开棉机.概念.结构原理 |
(Horizontal opener for cotton spinning; terms and definitions, principles of construction) |
DIN 64080-1974 |
棉纺厂用的梳棉机.概念.结构原理 |
(Card for cotton spinning; terms and definitions, principles of construction) |
DIN 64082-1976 |
棉纺工艺用的并条机.概念.结构原理 |
(Drafting frame for cotton spinning; terms and definitions, principles of construction) |
DIN 64082-2004 |
棉纺用并条机.术语、定义和组件 |
|
DIN 64083-1976 |
棉纺工艺用的翼锭粗纺机.概念.结构原理 |
(Flyer frame for cotton spinning; terms and definitions, principles of construction) |
DIN 64090-1981 |
精梳纱和半精梳纱纺织工艺用的并条机.概念 |
(Draw frame for worsted and semiworsted systems; terms and definitions) |
DIN 64108-1963 |
纺织机械.针布带.概念.针迹种类.针迹宽度 |
(Textile machinery; card fillets, terms, methods of setting the wire, set of wire widths) |
DIN 64110-1973 |
开松机角钉板用的钢销钉 |
(Steel pins for wooden lags for teasers) |
DIN 64115-1979 |
细纱机用的道夫斩刀 |
(Doffer comb blades for spinning machines) |
DIN 64118-1981 |
罗拉式梳毛机.概念 |
(Roller cards; terms and definitions) |
DIN 64124-1-1998 |
纺织机械和附件.全钢针布的异型钢丝.第1部分:带针脚无交链.主要尺寸 |
(Textile machinery and accessories - Section wires for metallic card clothing - Part 1: Foot without interchaining; main dimensions) |
DIN 64124-3-1998 |
纺织机械和附件.全钢针布的异型钢丝.第3部分:带交链针脚.主要尺寸 |
(Textile machinery and accessories - Section wires for metallic card clothing - Part 3: With interchaining foot; main dimensions) |
DIN 64126-2000 |
纺织机械.矩形条筒.主尺寸和公差 |
(Textile machinery - Sliver cans, rectangular - Main dimensions and tolerances) |
DIN 64127-1966 |
粗纺梳毛机上的毛网分条装置.概念.滚筒隔距.分条皮带 |
(Dividing rollers for dividers by woollen cards - Terms, roller gauges, tapes) |
DIN 64163-1974 |
纺织纤维初加工用的开线头机.概念.结构原理 |
(Hard waste breaker; for fibre-preparing; terms and definitions, principles of construction) |
DIN 64164-1977 |
纺织纤维初加工用的开松机.概念.结构原理 |
(Teaser for fibre-preparing; terms and definitions, principles of construction) |
DIN 64165-1977 |
纺织纤维初加工用的和毛机.概念.结构原理 |
(Carding willow for fibre-preparing; terms and definitions, principles of construction) |
DIN 64166-1974 |
纺织纤维初加工用的开松梳理机.概念.结构原理 |
(Garnetting machine for fibre-preparing; terms and definitions, principles of construction) |
DIN 6434-1984 |
铆钉用具 |
(Rivet sets) |
DIN 6435-1984 |
铆钉头用具 |
(Rivet headers) |
DIN 6436-1990 |
尖锄 |
(Pickaxes) |
DIN 6437-1-1990 |
锄把.尺寸.要求.检验 |
(Pickaxe handles; dimensions, requirements, testing) |
DIN 6437-2-1990 |
锄把.量规 |
(Pickaxe handles; gauges) |
DIN 6438-1971 |
手动剪板机 |
(Tinners` snips) |
DIN 6439-1988 |
修平镘刀 |
(Smoothing trowels) |
DIN 644-1997 |
线性滚动轴承.线性轴承用导轨.尺寸和公差 |
(Linear rolling bearings - Shaft support rails for linear bearings - Dimensions and tolerances) |
DIN 6440-1988 |
砌墙用的镘刀 |
(Masons trowels) |
DIN 6441-1988 |
抹浆用镘刀 |
(Plastering trowles) |
DIN 64410-6-1970 |
缝纫机用的圆柱形筒管.筒管.塞规 |
(Cylindrical tubes for sewing yarns; tubes, gauges) |
DIN 6442-1966 |
木工钻.长槽钻 |
(Wood bits; straight flute bits (straight flute drills)) |
DIN 64420-6-1976 |
锥形筒管.半锥角9°15′.筒管.塞规 |
(Cones, half angle of the cone 9 15; cones, gauges) |
DIN 6444-1966 |
木工钻.麻花钻 |
(Wood bits; auger bits) |
DIN 6445-1966 |
木工钻.环形柄钻头 |
(Wood bits; gimlets with ring handles) |
DIN 6446-1966 |
木工钻.梅花钻 |
(Wood bits; rose bits (countersinks)) |
DIN 6447-1976 |
木工钻.中心钻 |
(Wood bits; center bits (expansive bits)) |
DIN 6449-1966 |
木工钻.杆状麻花钻 |
(Wood bits; hand auger bits) |
DIN 645-1-1999 |
滚动轴承.型轨滚道.第1部分:系列1至3的尺寸 |
(Rolling bearings - Profile rail rolling guides - Part 1: Dimensions for series 1 to 3) |
DIN 645-2-1999 |
滚动轴承.型轨滚道.第1部分:系列4的尺寸 |
(Rolling bearings - Profile rail rolling guides - Part 2: Dimensions for serie 4) |
DIN 6450-1984 |
小直径凸模 |
(Pin punches) |
DIN 6451-1985 |
扁尖凿 |
(Cape chisels) |
DIN 6453-1984 |
平凿 |
(Flat chisels) |
DIN 6455-1984 |
槽凿 |
(Grooving chisels) |
DIN 6458-1984 |
冲孔机 |
(Drift punches) |
DIN 64580-1-1977 |
电动经纱自停装置的停经片导轨 |
(Bars for drop wires for electrical warp stop motions) |
DIN 64580-2-1977 |
机械经纱自停装置的停经片导轨 |
(Bars for drop wires for mechanical warp stop motions) |
DIN 64595-1997 |
纺织机械和附件.织筘.喷嘴织机用织筘.尺寸 |
(Textile machinery and accessories - Reeds - Reeds for air-jet weaving machines; dimensions) |
DIN 64597-1977 |
粘合织筘用盒式型材.连接尺寸 |
(Case profiles for glued reeds; inter-related dimensions) |
DIN 64605-1972 |
纱线制动重锤 |
(Yarn brake weights) |
DIN 6461-1966 |
木工钻.短型长槽钻 |
(Wood bits; short type straight flute bits (straight flute drills)) |
DIN 64610-1974 |
自动织机用的纬管 |
(Weft pirns for automatic looms) |
DIN 64638-1971 |
圆柱形拉伸加捻筒管 |
(Cylindrical tubes for draw-twisters) |
DIN 64639-1998 |
纺织机械和附件.喷气嘴织机用综框.连接尺寸 |
(Textile machinery and accessories - Heald frames for air-jet weaving machines - Connecting dimensions) |
DIN 6464-1966 |
木工钻.手用螺旋尖钻 |
(Wood bits; gimlet bits) |
DIN 6465-1976 |
去锅垢用锤 |
(Scaling hammers) |
DIN 64668-1969 |
织布厂的自动织机梭子 |
(Shuttles for automatic looms for weaving) |
DIN 64685-1969 |
织梭.名称 |
(Terms for shuttles) |
DIN 6473-1973 |
金属加工用手锯.弓形锯 |
(Hand saws for metal; Hachsaw frames) |
DIN 6475-2000 |
双面大锤 |
(Double face sledge hammers) |
DIN 6480-1990 |
木箱凿.起钉器 |
(Box chisels; nail pullers) |
DIN 64805-1984 |
复动式多臂机.纹板的凿孔模板 |
(Double lift dobbies; cards, matrices) |
DIN 64845-1969 |
法式细针距的未冲孔提花机纹板 |
(Unpunched Jacquard cards for French fine pitch) |
DIN 64846-1969 |
法式细针距提花机纹板--清棉机.机床尺寸.纹板凿孔模板 |
(Stamping machines for Jacquard cards for French fine pitch; size of machines, matrices) |