标准号 |
中文名称 |
英文名称 |
DIN EN 1113-1997 |
(PN10)盥洗室管件用淋浴喷头软管 |
(Showers hoses for (PB 10) sanitary tapware; German version EN 1113:1997) |
DIN EN 1114-1-1997 |
橡胶机械和塑料机械.挤压机和挤压设备.第1部分:挤压机的安全性要求 |
(Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders; German version EN 1114-1:1996) |
DIN EN 1114-2-1998 |
橡胶机械和塑料机械.挤压机和挤压设备.第2部分:模面制粒机的安全性要求 |
(Rubber and plastics machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers; German version EN 1114-2:1998) |
DIN EN 1114-3-2001 |
橡胶和塑料机械.挤压机和挤压线.第3部分:拉出的安全要求 |
(Rubber and plastics machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs; German version EN 1114-3:2001) |
DIN EN 1115-1-1998 |
地下压力排水和压力污水管用塑料管道系统.以未饱和聚酯树脂(UP)为基础的玻璃纤维增强热固性塑料(GFK).第1部 |
(Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 1: General; German version EN 1115-1:1997) |
DIN EN 1115-3-1996 |
地下压力排水和压力污水管用塑料管道系统.以未饱和聚酯树脂(UP)为基础的玻璃纤维增强热固性塑料(GFK).第3部 |
(Plastic piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings; German version EN 1115-3:1996) |
DIN EN 1115-5-1996 |
地下压力排水和压力污水管用塑料管道系统.以未饱和聚酯树脂(UP)为基础的玻璃纤维增强热固性塑料(GFK).第5部 |
(Plastic piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints; German version EN 1115-5:1996) |
DIN EN 1116-1995 |
厨房家具.厨房家具和器具的协调尺寸 |
(Kitchen furniture - Co-ordination sizes for kitchen furniture and kitchen appliances; German version EN 1116:1995) |
DIN EN 1116-2004 |
厨房家具.厨房家具和器具的协调尺寸 |
|
DIN EN 1117-2003 |
热交换器.液体冷却致冷剂冷凝器.确定性能的试验程序 |
(Heat exchangers - Liquid cooled refrigerant condensors - Test procedures for establishing the performance (includes amendment A1:2002); German version EN 1117:1998 + A1:2002) |
DIN EN 1118-2003 |
热交换器.冷冻冷却液冷却器.确定性能的试验程序 |
(Heat exchangers - Refrigerant cooled liquid coolers - Test procedure for establishing the performance (includes amendment A1:2002); German version EN 1118:1998 + A1:2002) |
DIN EN 1119-1996 |
塑料管道系统.玻璃纤维增强热固性塑料(GFK)制管连接件和异型件.密度以及抗柔性连接和铰链连接磨损能力的测 |
(Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints; German version EN 1119:1996) |
DIN EN 1120-1996 |
塑料管道系统.玻璃纤维增强热固性塑料(GFK)管和异型件.变形状态下一截管道的内壁抗化学作用的测定 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition; German version EN 1120:1996) |
DIN EN 112000-1996 |
总规范.光电图像变换管和视频放大器管 |
(Generic specification - Image converter and image intensifier tubes; German version EN 112000:1992) |
DIN EN 112001-1993 |
空白详细规范.图象转换器和图象增强管 |
(Blank detail specification: image converter and image intensifier tubes; German version EN 112001:1991) |
DIN EN 1121-2000 |
门在两种不同气候间的状态.试验方法 |
(Doors - Behaviour between two different climates - Test method; German version EN 1121:2000) |
DIN EN 1122-2002 |
塑料.镉的测定.湿分解法 |
(Plastics - Determination of cadmium - Wet decomposition method; German version EN 1122:2001) |
DIN EN 1123-1-1999 |
排水管道用带插接套的长焊缝焊接热镀锌钢管制管道和管件 |
(Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1123-1:1999) |
DIN EN 1123-1-2004 |
污水系统用带套管和孔座的纵向焊接热浸镀锌钢管及配件.第1部分:要求、检验和质量控制 |
|
DIN EN 1123-2-1999 |
排水管道用带插接套的长焊缝焊接热镀锌钢管制管道和管件.第2部分:尺寸 |
(Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions; German version EN 1123-2:1999) |
DIN EN 1123-3-2005 |
废水系统用带插接套的长焊缝焊接热浸镀锌钢管制管道和管件.第3部分:真空排水系统和船上排水系统的尺寸和特殊要求 |
|
DIN EN 1124-1-1999 |
废水管道用带插接套管,长焊缝不锈钢制造管和管件.第1部分:要求,检验,质量监督 |
(Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1124-1:1999) |
DIN EN 1124-1-2004 |
污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第1部分:要求、检验和质量控制 |
|
DIN EN 1124-2-1999 |
废水管道用带插接套管,长焊缝不锈钢制造管和管件.第2部分:S系统.尺寸 |
(Pipes and fittings of longitudinally welded stainless steel pipes, with spigot and socket for waste water systems - Part 2: Systeme S; dimensions; German version EN 1124-2:1999) |
DIN EN 1124-3-1999 |
废水管道用带插接套管,长焊缝不锈钢制造管和管件.第3部分:X系统.尺寸 |
(Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X; dimensions; German version EN 1124-3:1999) |
DIN EN 1124-4-2005 |
污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第4部分:真空排水系统和船用排水系统用件 |
|
DIN EN 1125-2002 |
建筑硬件.用水平棒操作应急出口.要求和试验方法 |
(Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods (includes Amendement A1:2001); German version EN 1125:1997 + A1:2001) |
DIN EN 1127-1-1997 |
可引起爆炸的气体.防爆.第1部分:原理和方法 |
(Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology; German version EN 1127-1:1997) |
DIN EN 1127-2-2002 |
可爆气体.防爆.第2部分:采矿业用基本原理和方法学 |
(Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining; German version EN 1127-2:2002) |
DIN EN 1128-1995 |
混凝土连接碎料板.硬体冲击阻力测定 |
(Cement-bounded particleboards - Determination of hard body impact resistance; German version EN 1128:1995) |
DIN EN 1129-1-1995 |
家具.折叠床.安全技术要求和检验方法.第1部分;安全技术要求 |
(Furniture - Foldaway beds - Safety requirements and testing - Part 1: Safety requirements; German version EN 1129-1:1995) |
DIN EN 1129-2-1995 |
家具.折叠床.安全技术要求和检验方法.第2部分:检验方法 |
(Furniture - Foldaway beds - Safety requirements and testing - Part 2: Test methods; German version EN 1129-2:1995) |
DIN EN 113-1996 |
木材防腐剂.测定对毁坏木材的担子菌纲起预防作用的试验方法.作用极限值测定 |
(Wood preservatives - Method of test for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values; German version EN 113:1996) |
DIN EN 113/A1-2004 |
木材防腐剂.抵御担子菌破坏效果测定的试验方法.毒性值的测定 |
|
DIN EN 1130-1-1996 |
家具.居室用摇蓝和有围栏的儿童床.第1部分:安全技术要求 |
(Furniture - Cribs and cradles for domestic use - Part 1: Safety requirements; German version EN 1130-1:1996) |
DIN EN 1130-2-1996 |
家具.居室用摇蓝和有围栏的儿童床.第2部分:检验方法 |
(Furniture - Cribs and cradles for domestic use - Part 2: Test methods; German version EN 1130-2:1996) |
DIN EN 113000-1996 |
总规范.摄象管 |
(Generic specification - Camera tubes; German version EN 113000:1991) |
DIN EN 113001-1993 |
空白详细规范.摄象管 |
(Blank detail specification: camera tubes; German version EN 113001:1991) |
DIN EN 1131-1994 |
水果和蔬菜汁.相对浓度测定 |
(Fruit and vegetable juices - Determination of the relative density; German version EN 1131:1994) |
DIN EN 1132-1994 |
水果和蔬菜汁.PH值的测定 |
(Fruit and vegetable juices - Determination of the pH-value; German version EN 1132:1994) |
DIN EN 1133-1994 |
水果和蔬菜汁.甲醛水的测定 |
(Fruit and vegetable juices - Determination of the formol number; German version EN 1133:1994) |
DIN EN 1134-1994 |
水果和蔬菜汁.钠.钾.钙.镁含量测定.原子吸收光谱测定法(AAS) |
(Fruit and vegetable juices - Determination of sodium, potassium, calcium and magnesium content by atomic absorption spectrophotometry (AAS); German version EN 1134:1994) |
DIN EN 1135-1994 |
水果和蔬菜汁.灰含量测定 |
(Fruit and vegetable juices - Determination of ash content; German version EN 1135:1994) |
DIN EN 1136-1994 |
水果和蔬菜汁.磷含量测定.光谱光度法 |
(Fruit and vegetable juices - Determination of phosphorus content; spectrophotometric method; German version EN 1136:1994) |
DIN EN 1137-1994 |
水果和蔬菜汁.柠檬酸含量的酶性测定.NADH的光谱光度测定 |
(Fruit and vegetable juices - Enzymatic determination of citric acid (citrate) content; NADH spectrometric method; German version EN 1137:1994) |
DIN EN 1138-1994 |
水果和蔬菜汁.L苹果酸含量的酶性测定.NADN的分光光度测定 |
(Fruit and vegetable juices - Enzymatic determination of L-malic acid (L-malate) content - NADH spectrometric method; German version EN 1138:1994) |
DIN EN 1139-1994 |
水果和蔬菜汁.D异柠檬酸含量的酶性测定.NADPH的分光光度测定 |
(Fruit and vegetable juices - Enzymatic determination of D-isocitric acid content - NADPH spectrometric method; German version EN 1139:1994) |
DIN EN 1140-1994 |
水果和疏菜汁.D葡萄糖和D果糖含量的酶性测定.NADPH的分光光度测定 |
(Fruit and vegetable juices - Enzymatic determination of D-glucose and D-fructose content - NADPH spectrometric method; German version EN 1140:1994) |
DIN EN 114000-1996 |
总规范.光电倍增管 |
(Generic specification - Photomultiplier tubes; German version EN 114000:1991) |
DIN EN 114001-1996 |
空白详细规范.光电倍增管 |
(Blank detail specification - Photomultiplier tubes; German version EN 114001:1991) |
DIN EN 1141-1994 |
水果和疏菜汁.脯氨酸含量的分光光度测定 |
(Fruit and vegetable juices - Spectrometric determination of proline content; German version EN 1141:1994) |
DIN EN 1142-1994 |
水果和疏菜汁.硫酸盐含量的测定 |
(Fruit and vegetable juices - Determination of sulfate content; German version EN 1142:1994) |
DIN EN 1143-1-2002 |
安全存储设备.防盗检验的要求、分类和方法.第1部分:钱柜,保险库门和保险库 |
(Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, strongroom doors and strongrooms; German version EN 1143-1:1997 + A1:2001 + A2:2002) |
DIN EN 1143-2-2002 |
安全存储装置.防盗检验的要求、分类和方法.第2部分:储存系统 |
(Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems; German version EN 1143-2:2001) |
DIN EN 1146-1999 |
呼吸保护设备.带护罩的自含开路压缩气体呼吸装置(带护罩的压缩空气自救器).要求、试验和标记 |
(Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood (compressed air escape apparatus with hood) - Requirements, testing, marking (including Amendment A1:1998 + A2:1999); German version EN 1 |
DIN EN 1146-2005 |
呼吸保护设备.带排气罩的自主式开路压缩气体呼吸装置.要求、试验、标记 |
|
DIN EN 1146/A3-2002 |
呼吸保护装置.面具式自带开放线路压缩空气呼吸装置(面具式压缩空气逃生装置).要求、试验和标记.修改件A3 |
(Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood (compressed air escape apparatus with hood) - Requirements, testing, marking; Amendment A3; German version EN 1146:1997/A3:2001) |
DIN EN 1147 Bb.1-2001 |
根据DINEN1147的消防队用便携式梯子.消防梯、挂钩梯、伸缩梯、组合梯及承窝件 |
(Portable ladders for fire brigade in accordance to DIN EN 1147 - Stick ladder, hook ladder, extending ladder, sectional ladder, socket part) |
DIN EN 1147-2000 |
灭火用便携梯 |
(Portable ladders for fire service use; German version EN 1147:2000) |
DIN EN 1148-1998 |
热交换器.供热系统用水/水热交换器.确定功率数据的测试方法 |
(Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data; German version EN 1148:1998) |
DIN EN 1148/A1-2005 |
热交换器.区域供暖用水循环热交换器.确定性能数据的试验程序.德文版本 EN 1148-1998/A1-2005 |
|
DIN EN 1149-1-1996 |
防护服.静电性能.第1部分:表面电阻(检验方法和要求) |
(Protective clothing - Electrostatic properties - Part 1: Surface resistivity (Test methods and requirements); German version EN 1149-1:1995) |
DIN EN 1149-2-1997 |
防护服.静电性能.第2部分:用材料来测量电阻的测试方法(回路电阻) |
(Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance); German version EN 1149-2:1997) |
DIN EN 1149-3-2004 |
防护服.静电性能.第3部分:测量电荷衰减的试验方法 |
|
DIN EN 115-1998 |
自动扶梯和自动输送带的设计和安装的安全规则 |
(Safety rules for the construction and installation of escalators and passenger conveyors; German version EN 115:1995 + A1:1998) |
DIN EN 115/A2-2004 |
电梯和人员传送装置的建造和安装的安全规则 |
|
DIN EN 1150-1999 |
防护服.非专业需要用报警服装.检验方法和要求 |
(Protective clothing - Visibility clothing for non professional use - Test methods and requirements; German version EN 1150:1999) |
DIN EN 1151-1999 |
泵,离心泵.家用暖气设备和生活用水加热设备用200W以下电器消耗功率的循环泵.要求,检验,标识 |
(Pump, rotodynamic pumps - Circulation pumps having an electrical effect not exeeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking; German version EN 1151:1999) |
DIN EN 1152-1994 |
农林业用拖拉机和机械设备.联节轴防护装置.磨损试验和强度试验 |
(Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and strength tests; German version EN 1152:1994) |
DIN EN 1153-1996 |
厨房家具.内装和外放厨柜和工作台的安全技术要求和检验方法. |
(Kitchen furniture - Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops; German version EN 1153:1995) |
DIN EN 1154-2003 |
建筑物小五金构件.控制门锁装置.要求和检验方法 |
(Building hardware - Controlled door closing devices - Requirements and test methods (includes amendment A1:2002); German version EN 1154:1996 + A1:2002) |
DIN EN 1155-2003 |
建筑物五金件.旋转门用电动定位装置.要求和检验方法 |
(Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods (includes amendment A1:2002); German version EN 1155:1997 + A1:2002) |
DIN EN 1158-2003 |
建筑五金.门锁调节装置.要求和检验方法 |
(Building hardware - Door coordinator devices - Requirements and test methods (includes amendment A1:2002); German version EN 1158:1997 + A1:2002) |
DIN EN 1159-3-2003 |
高级工业陶瓷.陶瓷复合材料的热物理性能.第3部分:比热的测定 |
(Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity; German version EN 1159-3:2003) |
DIN EN 116-1998 |
柴油与家庭取暖用燃油.冷水堵塞点的测定 |
(Diesel and domestic heating fuels - Determination of cold filter plugging point; German version EN 116:1997) |
DIN EN 1160-1996 |
液化天然气用设备和装置.液化天然气的一般性能 |
(Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas; German version EN 1160:1996) |
DIN EN 116000-2-1993 |
总规范.机电或断电器.第2部分:时延断电器的总规范说明和试验方法 |
(Generic specification: electromechanical all-or-nothing relays; part 2: generic data and methods of test for time delay relays; German version EN 116000-2:1992) |
DIN EN 116000-3-1996 |
总规范.机电配电继电器.第3部分:测量和检验方法 |
(Generic specification - Electromechanical all-or-nothing relays - Part 3: Test and measurement procedures; German version EN 116000-3:1996) |
DIN EN 1161-1996 |
羽毛和绒毛.检验方法.湿度测定 |
(Feather and down - Test methods - Determination of moisture content; German version EN 1161:1996) |
DIN EN 1162-1996 |
羽毛和绒毛.检验方法.氧指数测定 |
(Feather and down - Test methods - Determination of the oxygen index number; German version EN 1162:1996) |
DIN EN 116200-1992 |
分规范.机电配电继电器(包括恶劣的环境条件下用的继电器) |
(Sectional specification: electromechanical all-or-nothing relays (including relays for severe environmental conditions); german version EN 116200:1991) |
DIN EN 116203-1995 |
增强型工业用机电式“有“或“无“继电器空白详细规范 |
(Blank detail specification: Electromechanical all-or-nothing relays for enhanced industrial application; German version EN 116203:1994) |
DIN EN 116204-1995 |
侵蚀性工业用机电式“有“或“无“密封式继电器空白详细规范 |
(Blank detail specification: Electromechanical all-or-nothing relays sealed relays for aggressive industrial application; German version EN 116204:1994) |
DIN EN 116207-1995 |
空白详细规范:密封式断电器.在较困难的环境条件下用的固定式仪器(116205),移动式仪器(116206),飞行式仪器(1 |
(Blank detail specification: Hermetically sealed relays - For severe static environmental conditions (116205); for severe mobile environmental conditions (116206); for severe airborne environmental conditions (116207); German version EN 116205/116206/1162 |
DIN EN 1163-1996 |
羽毛和绒毛.检验方法.油含量和脂含量测定 |
(Feather and down - Test methods - Determination of the oil and fat content; German version EN 1163:1996) |
DIN EN 116300-1994 |
分类规范.经过质量确认的高负荷电器机械配电继电器(电流强度5A以上) |
(Sectional specification; electromechanical all-or-nothing heavy load relays of assessed quality (rated from 5 A and above); German version EN 116300:1993) |
DIN EN 116303-1994 |
空白详细规范.经过质量确认的高负荷电器机械配电继电器(密闭密避5A至25) |
(Blank detail specification; electromechanical all-or-nothing heavy load relays of assessed quality (hermetically sealed, 5 A to 25 A); german version EN 116303:1993) |
DIN EN 1164-1998 |
羽毛和绒毛.检验方法.含水萃取物混浊性测定 |
(Feather and down - Test methods - Determination of the turbidity of an aqueous extract; German version EN 1164:1998) |
DIN EN 1165-1996 |
羽毛和绒毛.检验方法.水溶解氯化物的测定 |
(Feather and down - Test methods - Determination of water-soluble chlorides; German version EN 1165:1996) |
DIN EN 1167-1996 |
羽毛和绒毛.羽毛和绒毛被褥尺寸测量的检验方法 |
(Feathers and down - Method of test for measuring the sizes of quilts filled with feather and/or down; German version EN 1167:1996) |
DIN EN 1169-1999 |
预制混凝土制品.玻璃纤维增强混凝土工厂生产控制的一般规则 |
(Precast concrete products - General rules for factory production control of glass-fibre reinforced cement; German version EN 1169:1999) |
DIN EN 117-1990 |
木材防腐剂.防犀白蚁属(ReticulitermessantonensisdeFeytand)作用极限测定 |
(Wood preservatives; determination of toxic values against Reticulitermes santonensis de Feytaud (laboratory method); german version EN 117:1989) |
DIN EN 117-2005 |
木材防腐剂.防犀白蚁属种(欧洲白蚁)的毒效测定(实验室法) |
|
DIN EN 1170-1-1998 |
预制混凝土产品.玻璃纤维增强混凝土的试验方法.第1部分:基质一致性的测量.坍落试验法 |
(Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix; “Slump test“ method; German version EN 1170-1:1997) |
DIN EN 1170-2-1998 |
预制混凝土制品.玻璃纤维增强混凝土用检验方法.第2部分:新鲜的玻璃纤维混凝土中纤维含量的测定.冲洗试验 |
(Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC; “wash out test“; German version EN 1170-2:1997) |
DIN EN 1170-3-1998 |
预制混凝土产品.玻璃纤维增强混凝土的试验方法.第3部分:喷射GRC中纤维含量的测量 |
(Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC; German version EN 1170-3:1997) |
DIN EN 1170-4-1998 |
预制混凝土产品.玻璃纤维增强混凝土的试验方法.第4部分:抗弯强度的测量.简化抗弯试验法 |
(Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; “simplified bending test“ method; German version EN 1170-4:1997) |
DIN EN 1170-5-1998 |
预制混凝土产品.玻璃纤维增强混凝土的试验方法.第5部分:抗弯强度的测量.完整抗弯试验法 |
(Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; “complete bending test“ method; German version EN 1170-5:1997) |
DIN EN 1170-6-1998 |
预制混凝土产品.玻璃纤维增强混凝土的试验方法.第6部分:浸入法水吸附的测定和干密度的测定 |
(Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density; German version EN 1170-6:1997) |
DIN EN 1170-7-1998 |
预制混凝土产品.玻璃纤维增强混凝土的试验方法.第7部分:湿度含量引起尺寸变化的极限测量 |
(Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content; German version EN 1170-7:1997) |
DIN EN 117000-1992 |
总规范.经质量保证的半导体继电器.一般数据和检验方法 |
(Generic specifications: solid state all-or-nothing relays of assessed quality; generic data and methods of test; german version EN 117000:1991) |
DIN EN 1171-2003 |
工业用阀.铸铁闸阀 |
(Industrial valves - Cast iron gate valves; German version EN 1171:2002) |
DIN EN 1172-1996 |
铜和铜合金.建筑用薄板和带材 |
(Copper and copper alloys - Sheet and strip for building purposes; German version EN 1172:1996) |
DIN EN 1173-1995 |
铜和铜合金.材料条件或回火硬度标识 |
(Copper and copper alloys - Material condition or temper designation; German version EN 1173:1995) |
DIN EN 1174-1-1996 |
医学产品的消毒,一件产品上微生物种群的估计.第1部分:要求 |
(Sterilization of medical devices - Estimation of the population of micro-organisms on product - Part 1: Requirements; German version EN 1174-1:1996) |
DIN EN 1174-2-1997 |
医学产品的消毒.一件产品上微生物种群的估计.第2部分:指南 |
(Sterilization of medical devices - Estimation of the population of micro-organisms on product - Part 2: Guidance; German version EN 1174-2:1996) |
DIN EN 1174-3-1997 |
医学产品的消毒.一件产品上微生物种群的估计.第2部分:微生物技术的验证方法指南 |
(Sterilization of medical devices - Estimation of the population of micro-organisms on product - Part 3: Guide to the methods for validation of microbiological techniques; German version EN 1174-3:1996) |
DIN EN 1175-1-1998 |
地面输送机械的安全性.电器要求.第1部分:电池蓄电驱动的地面输送机械的一般要求 |
(Safety of industrial trucks - Electrical requirements - Part 1: General requirements for batterie powered trucks; German version EN 1175-1:1998) |
DIN EN 1175-2-1998 |
地面输送机械的安全性.电器要求.第2部分:用内燃机的地面输送机械的一般要求 |
(Safety of industrial trucks - Electrical requirements - Part 2: General requirements for internal combustion engine powered trucks; German version EN 1175-2:1998) |
DIN EN 1175-3-1998 |
地面输送机械的安全性.电器要求.第3部分:用内燃机的地面输送机械的电器输电系统的特殊要求 |
(Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks; German version EN 1175-3:1998) |
DIN EN 1176 Bb.1-2003 |
游乐场器材.安全要求和试验方法.说明 |
(Playground equipment - Safety requirements and test methods; Explanations) |
DIN EN 1176-1-2003 |
游乐场地设备.第1部分:一般安全要求和试验方法.(包括修改A1:2002和A2:2003) |
(Playground equipment - Part 1: General safety requirements and test methods (includes amendments A1:2002 and A2:2003); German version EN 1176-1:1998 + A1:2002 + A2:2003) |
DIN EN 1176-1/A1-2002 |
游戏场地设备.第1部分:一般安全技术要求和检验方法:修改件A1 |
(Playground equipment - Part 1: General safety requirements and test methods; Amendment A1; German version EN 1176-1:1998/A1:2002) |
DIN EN 1176-2-2003 |
游乐场地设备.第2部分:秋千的附加特殊安全要求和试验方法(包括修改A1:2003) |
(Playground equipment - Part 2: Additional specific safety requirements and test methods for swings (includes amendment A1:2003); German version EN 1176-2:1998 + A1:2003) |
DIN EN 1176-3-2003 |
游乐场地设备.第3部分:滑梯的附加特殊安全要求和试验方法(包括修改A1:2003) |
(Playground equipment - Part 3: Additional specific safety requirements and test methods for slides (includes amendment A1:2003); German version EN 1176-3:1998 + A1:2003) |
DIN EN 1176-4-2003 |
游乐场地设备.第4部分:缆车索道的附加特殊安全要求和试验方法(包括修改A1:2003) |
(Playground equipment - Part 4: Additional specific safety requirements and test methods for runways (includes amendment A1:2003); German version EN 1176-4:1998 + A1:2003) |
DIN EN 1176-5-2003 |
游乐场地设备.第5部分:旋转木马的附加特殊安全要求和试验方法(包括修改A1:2002和A2:2003) |
(Playground equipment - Part 5: Additional specific safety requirements and test methods for carousels (includes amendments A1:2002 and A2:2003); German version EN 1176-5:1998 + A1:2002 and A2:2003) |
DIN EN 1176-5/A1-2002 |
游戏场地设备.第5部分:旋转木马的附加特殊安全要求和试验方法.修改件A1 |
(Playground equipment - Part 5: Additional specific safety requirements and test methods for carousels; Amendment A1; German version EN 1176-5:1998/A1:2002) |
DIN EN 1176-6-2003 |
游乐场地设备.第6部分:跷跷板的附加特殊安全要求和试验方法(包括修改A1:2002) |
(Playground equipment - Part 6: Additional specific safety requirements and test methods for rocking equipment (includes Amendment A1:2002); German version EN 1176-6:1998 + A1:2002) |
DIN EN 1176-6/A1-2002 |
游戏场地设备.第6部分:摇动设备的附加特殊安全要求和试验方法.修改件A1 |
(Playground equipment - Part 6: Additional specific safety requirements and test methods for rocking equipment; Amendment A1; German version EN 1176-6:1998/A1:2002) |