标准号 |
中文名称 |
英文名称 |
| DIN EN 1605-1997 |
建筑物用热绝缘产品.明确确定的压力负荷和温度负荷条件下变形测定 |
(Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions; German version EN 1605:1996) |
| DIN EN 1606-1997 |
建筑用绝热材料.压力负荷下长期蠕变性能的测定 |
(Thermal insulating products for building applications - Determination of compressive creep; German version EN 1606:1994) |
| DIN EN 1607-1997 |
建筑物用热绝缘产品.与面垂直的抗拉强度的测定 |
(Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces; German version EN 1607:1996) |
| DIN EN 1608-1997 |
建筑物用热绝缘产品.板平面上抗拉强度的测定 |
(Thermal insulating products for building applications - Determination of tensile strength parallel to faces; German version EN 1608:1996) |
| DIN EN 1609-1997 |
建筑用绝热材料.短时部分浸入时吸水量测定 |
(Thermal insulating products for building applications - Determination of short term water absorption by partial immersion; German version EN 1609:1996) |
| DIN EN 161-2002 |
气焊枪和燃气器具用自动关闭阀 |
(Automatic shut-off valves for gas burners and gas appliances; German version EN 161:2001) |
| DIN EN 1610 Bb.1-1997 |
下水管道的铺设和检验.相关标准和规范的目录 |
(Construction and testing of drains and sewers - List of relevant standards and guidelines (status as of 1997-02)) |
| DIN EN 1610-1997 |
下水管道的铺设和检验 |
(Construction and testing of drains and sewers; German version EN 1610:1997) |
| DIN EN 1611-1-2002 |
锯材.软木的表面分级.第1部分:欧洲云杉、冷杉、松树和黄杉 |
(Sawn timber - Appearance grading of softwoods - Part 1: European spruces, firs, pines, Douglas firs and larches (including amendment 1:2002); German version EN 1611-1:1999 + A1:2002) |
| DIN EN 1612-1-1997 |
橡胶和塑料加工机械.反作用铸造机.第1部分:测定和混合设备的安全要求 |
(Rubber and plastics machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units; German version EN 1612-1:1997) |
| DIN EN 1612-2-2000 |
橡胶和塑料机械.反应性制模机械.第2部分:反应性制模设备的安全要求 |
(Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant; German version of EN 1612-2:2000) |
| DIN EN 1615-2001 |
一次性使用的内脏营养导管和输送器以及连接器.设计和试验 |
(Enteral feeding catheters and giving sets for single use and their connectors - Design and testing; German version EN 1615:2000) |
| DIN EN 1616-1999 |
一次性使用无菌膀胱导管 |
(Sterile uretheral catheters for single use (includes Amendment A1:1999); German version EN 1616:1997 + A1:1999) |
| DIN EN 1617-1997 |
一次性使用无菌引流导管和附件 |
(Sterile drainage catheters and accessory devices for single use; German version EN 1617:1997) |
| DIN EN 1618-1997 |
非脉管内导管.一般性能的检验方法 |
(Catheters other than intravascular catheters - Test methods for common properties; German version EN 1618:1997) |
| DIN EN 1619-1996 |
生物工程.大比例方法和生产.原菌株保存过程中的管理及组织的一般要求 |
(Biotechnology - Large-scale process and production - General requirements for management and organization for strain conservation procedures; German version EN 1619:1996) |
| DIN EN 1620-1996 |
生物技术.大比例法和生产.与相关危险等级相应的建筑物 |
(Biotechnology - Large-scale process and production - Plant building according to the degree of hazard; German version EN 1620:1996) |
| DIN EN 1621-1-1998 |
摩托车手抗机械冲击用防护服.第1部分:冲击防护装置的要求和检验方法 |
(Motorcyclists` protective clothing against mechanical impact - Part 1: Requirements and test methods for impact protectors; German version EN 1621-1:1997) |
| DIN EN 1622-1998 |
水质.气味极限值(TON)和味道极限值(TFN)的测定 |
(Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN); German version EN 1622:1997) |
| DIN EN 1624-1999 |
纺织物和纺织制品.工业和技术纺织品的燃烧特性.测定垂直试样火焰蔓延的方法 |
(Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the flame spread of vertically oriented specimens; German version EN 1624:1999) |
| DIN EN 1625-1999 |
纺织物和纺织制品.工业和技术纺织品的燃烧特性.测定垂直试样易燃性的方法 |
(Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the ignitability of vertically oriented specimens; German version EN 1625:1999) |
| DIN EN 1626-1999 |
冷凝剂罐.低温冷却用闭锁阀门 |
(Cryogenic vessels - Valves for cryogenic service; German version EN 1626:1999) |
| DIN EN 163100-1996 |
分规范.集成混合电路和集成层电路 |
(Sectional specification: Film and hybrid integrated circuits; German version EN 163100:1991) |
| DIN EN 163101-1996 |
空白详细规范.集成混合电路和集成层电路 |
(Blank detail specification: Film and hybrid integrated circuits; German version EN 163101:1991) |
| DIN EN 1634-1-2000 |
门和百页门组件的防火试验.第1部分:防火门和百页门 |
(Fire resistance tests for door and shutter assemblies - Part 1: Fire doors and shutters; German version EN 1634-1:2000) |
| DIN EN 1634-3-2002 |
门和遮板组件的耐火性试验.第3部分:防烟门和遮板 |
(Fire resistance tests for door and shutter assemblies - Part 3: Smoke control doors and shutters; German version EN 1634-3:2001) |
| DIN EN 1634-3-2005 |
门和遮板组件的耐火性试验.第3部分:防烟门和遮板 |
|
| DIN EN 1636-3-1999 |
常压排水管和下水道用塑料管道系统.不饱和聚酯树脂(UP)玻璃纤维增强热固塑料(GRP).第3部分:配件 |
(Plastics piping systems for non-pressure drainage and sewerage - Glassreinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings; German version EN 1636-3:1997) |
| DIN EN 1636-5-1999 |
常压排水管和下水道用塑料管道系统.不饱和聚酯树脂(UP)玻璃纤维增强热固塑料(GRP).第5部分:接头的适应性 |
(Plastics piping systems for non-pressure drainage and sewerage - Glassreinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints; German version EN 1636-5:1997) |
| DIN EN 1636-6-1999 |
常压排水管和下水道用塑料管道系统.不饱和聚酯树脂(UP)玻璃纤维增强热固塑料(GRP).第6部分:安装实施规范 |
(Plastics piping systems for non-pressure drainage and sewerage - Glassreinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 6: Practices for installation; German version EN 1636-6:1997) |
| DIN EN 1637-1999 |
轻质输送带.电阻测量的试验方法 |
(Light conveyor belts - Test methods for the measurement of the electrical resistances; German version EN 1637:1999) |
| DIN EN 1638-1997 |
塑料管道系统.玻璃纤维增强热固性塑料(GFK)管.圆筒内压作用的检验方法 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method for the effects of cyclic internal pressure; German version EN 1638:1997) |
| DIN EN 1639-1996 |
牙科学.牙科用医疗产品.器械 |
(Dentistry - Medical devices for dentistry - Instruments; German version EN 1639:1996) |
| DIN EN 1639-2004 |
牙科学.牙科用医疗器械.仪器 |
|
| DIN EN 1640-1996 |
牙科学.牙科用医疗产品.装备 |
(Dentistry - Medical devices for dentistry - Equipment; German version EN 1640:1996) |
| DIN EN 1640-2004 |
牙科学.牙科用医疗器械.设备 |
|
| DIN EN 1641-1996 |
牙科学.牙科用医疗产品.材料 |
(Dentistry - Medical devices for dentistry - Materials; German version EN 1641:1996) |
| DIN EN 1641-2004 |
牙科学.牙科用医疗器械.材料 |
|
| DIN EN 1642-1996 |
牙科学.牙科用医疗产品.牙科植入物 |
(Dentistry - Medical devices for dentistry - Dental implants; German version EN 1642:1996) |
| DIN EN 1642-2004 |
牙科学.牙科用医疗器械.牙科植入物 |
|
| DIN EN 1643-2001 |
燃气燃烧器和燃气用具用自动截止阀的阀门检验系统 |
(Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000) |
| DIN EN 1644-1-1997 |
医用非织物纱布垫的检验方法.第1部分:制造纱布垫用的非织物 |
(Test methods for nonwoven compresses for medical use - Part 1: Nonwovens used in the manufacture of compresses; German version EN 1644-1:1997) |
| DIN EN 1644-2-2000 |
医用非织物纱布垫的检验方法.第2部分:压缩.德文版本EN1644-2:2000 |
(Test methods for nonwoven compresses for medical use - Part 2: Compresses; German version EN 1644-2:2000) |
| DIN EN 1645-1-1998 |
可居住休闲旅游车.大蓬车.第1部分:顾及健康和安全的居住区的要求 |
(Leisure accomodation vehicles - Caravans - Part 1: Habitation requirements relating to health and safety; German version EN 1645-1:1998) |
| DIN EN 1645-1-2005 |
休闲居住车.旅居挂车.第1部分:与健康和安全有关的居住区的要求 |
|
| DIN EN 1645-1/A1-2002 |
休闲住宿车辆.旅居挂车.第1部分:与健康和安全有关的居住要求.修改件A1 |
(Leisure accommodation vehicles - Caravans - Part 1: Habitation requirements relating to health and safety; Amendment A1; German version EN 1645-1:1998/A1:2001) |
| DIN EN 1645-2-1998 |
可居住休闲旅游车.大蓬车.第2部分:用户有效负载 |
(Leisure accommodation vehicles - Caravans - Part 2: User payload; German version EN 1645-2:1998) |
| DIN EN 1646-1-1998 |
可居住休闲旅游车.电动大蓬车.第1部分:顾及健康和安全的居住区的要求 |
(Leisure accomodation vehicles - Motor caravans - Part 1: Habitation requirements relating to health and safety; German version EN 1646-1:1998) |
| DIN EN 1646-1-2005 |
休闲居住车.电动旅居挂车.第1部分:与健康和安全有关的居住区的要求 |
|
| DIN EN 1646-1/A1-2002 |
休闲住宿车辆.旅居车.第1部分:与健康和安全有关的居住要求.修改件A1 |
(Leisure accommodation vehicles - Motor caravans - Part 1: Habitation requirements relating to health and safety; Amendment A1; German version EN 1646-1:1998/A1:2001) |
| DIN EN 1646-2-1998 |
可居住休闲旅游车.电动大蓬车.第2部分:用户有效负载 |
(Leisure accommodation vehicles - Motor caravans - Part 2: User payload; German version EN 1646-2:1998) |
| DIN EN 1647 Berichtigung 1-2001 |
对DINEN1647:1998-10的勘误.德文版EN1647:1998/A1:2001 |
(Corrigendum to DIN EN 1647:1998-10; German version EN 1647:1998/A1:2001) |
| DIN EN 1647-1998 |
可居住休闲旅游车.活动房屋.顾及健康和安全的居住区的要求 |
(Leisure accomodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety; German version EN 1647:1998) |
| DIN EN 1647-2005 |
休闲居住车.休假旅居挂车.与健康和安全有关的居住区的要求 |
|
| DIN EN 1647/A2-2002 |
休闲住宿车辆.假期家用旅居挂车.与健康和安全有关的居住要求.修改件A2 |
(Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety; Amendment A2; German version EN 1647-1:1998/A2:2001) |
| DIN EN 1648-1-1998 |
可居住的休闲旅游车.12V直流超低电压用的电器装置.第1部分:居住挂车 |
(Leisure accomodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans; German version EN 1648-1:1997) |
| DIN EN 1648-1-2005 |
休闲居住车.12V直流超低压电气装置.第1部分:居住挂车 |
|
| DIN EN 1648-2-1998 |
可居住的休闲旅游车.12V直流超低电压用的电器装置.第2部分:电动机驱动的居住挂车 |
(Leisure accomodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2: Motorcaravans; German version EN 1648-2:1997) |
| DIN EN 1648-2-2005 |
休闲居住车.12V直流超低压电气装置.第2部分:电动居住挂车 |
|
| DIN EN 1649-2004 |
AIDC技术.影响条形码符号的读取的操作方法 |
|
| DIN EN 165-1995 |
人眼防护.词汇表 |
(Personal eye-protection - Vocabulary; German version EN 165:1995) |
| DIN EN 1650-1998 |
化学消毒剂和防腐剂.食品,工业,家用以及公共设施等领域中为测定化学消毒剂和防腐剂杀毒作用的定量悬浮试验. |
(Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (phase 2, |
| DIN EN 165000-1-1996 |
薄膜和混合集成电路.第1部分:总规范.合格认定的方法 |
(Film and hybrid integrated circuits - Part 1: Generic specification - Capability approval procedure; German version EN 165000-1:1996) |
| DIN EN 165000-2 Berichtigung 1-1997 |
对DINEN165000-2:1996-11的校正 |
(Corrigenda to DIN EN 165000-2:1996-11) |
| DIN EN 165000-2-1996 |
薄膜和混合集成电路.第2部分:内部外观检查和特殊试验 |
(Film and hybrid integrated circuits - Part 2: Internal visual inspection and special tests; German version EN 165000-2:1994) |
| DIN EN 165000-3-1996 |
薄膜和混合集成电路.第3部分:薄膜和混合集成电路生产者用自身审核清单和报告 |
(Film and hybrid integrated circuits - Part 3: Self-audit checklist and report for film and hybrid integrated circuit manufacturers; German version EN 165000-3:1996) |
| DIN EN 165000-4-1996 |
薄膜和混合集成电路.第4部分:客户信息.产品评定用检验流程图和空白详细规范 |
(Film and hybrid integrated circuits - Part 4: Customer information, product assessment level schedules and blank detail specification; German version EN 165000-4:1996) |
| DIN EN 165000-5-1998 |
薄膜层集成电路和混合集成电路.第5部分:资格认可的程序 |
(Film and hybrid integrated circuits - Part 5: Procedure for qualification approval; German version EN 165000-5:1997) |
| DIN EN 1651-1999 |
滑翔设备.背带.安全要求和强度试验 |
(Paragliding equipment - Harnesses - Safety requirements and strength tests; German version EN 1651:1999) |
| DIN EN 1652-1998 |
铜和铜合金.一般用途的板材、薄板、带材和圆材 |
(Copper and copper alloys - Plate, sheet, strip and circles for general purposes; German version EN 1652:1997) |
| DIN EN 1653-2000 |
铜和铜合金.锅炉、压力容器和热水存储设备用板材、薄板材和圆材(包括修改件A1-2000) |
(Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units (includes amendment A1:2000); German version EN 1653:1997 + A1:2000) |
| DIN EN 1654-1998 |
铜和铜合金.弹簧和插接连接件用带材 |
(Copper and copper alloys - Strip for springs and connectors; German version EN 1654:1997) |
| DIN EN 1655-1997 |
铜和铜合金.符合性声明 |
(Copper and copper alloys - Declarations of conformity; German version EN 1655:1997) |
| DIN EN 1656-2000 |
化学消毒剂和防腐变剂.评估兽医学领域用化学消毒剂和防腐变剂杀菌作用的定量悬浮液试验.试验方法和要求(第2 |
(Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and requirements (phase 2/step 1); German version EN 1656:2 |
| DIN EN 1657-2000 |
化学消毒剂和防腐变剂.评估兽医学领域用化学消毒剂和防腐变剂灭菌作用的定量悬浮液试验.试验方法和要求(第2 |
(Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and requirements (phase 2/step 1); German version EN 1657:200 |
| DIN EN 1658-1997 |
试管诊断仪上标识的要求 |
(Requirements for marking of in vitro diagnostic instruments; German version EN 1658:1996) |
| DIN EN 1659-1997 |
试管诊断系统.微生物的培养基.术语 |
(In vitro diagnostic systems - Culture media for microbiology - Terms and definitions; German version EN 1659:1996) |
| DIN EN 166-2002 |
个人眼睛防护.规范 |
(Personal eye-protection - Specifications; German version EN 166:2001) |
| DIN EN 166000-1996 |
总规范:表面声波过滤器 |
(Generic specification: Surface acoustic wave (SAW) filters; German version EN 166000:1995) |
| DIN EN 1661-1998 |
带法兰的六角螺母 |
(Hexagon nuts with flange (ISO/DIS 4161:1996, modified); German version EN 1661:1997) |
| DIN EN 166100-1999 |
分规范.表面声波(SAW)滤波器 |
(Sectional specification: Surface acoustic wave (SAW) filters; German version EN 166100:1998) |
| DIN EN 166101-1999 |
空白详细规范.表面声波(SAW)滤波器.能力鉴定 |
(Blank detail specification: Surface Acoustic Wave (SAW) filters - Capability approval; German version EN 166101:1999) |
| DIN EN 1662-1998 |
轻型系列带法兰的六角螺栓 |
(Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997) |
| DIN EN 1663-1998 |
带有法兰的普通扭矩型六角螺母(带非金属垫片) |
(Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified); German version EN 1663:1997) |
| DIN EN 1664-1998 |
带有夹紧部和法兰的六角螺母.全金属螺母 |
(Prevailing torque type - All-metal hexagon nuts with flange (ISO 7044:1997, modified); German version EN 1664:1997) |
| DIN EN 1666-1998 |
米制细螺纹,带夹紧部和法兰的六角螺母(带有非金属垫层) |
(Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread (ISO 12125:1997, modified); German version EN 1666:1997) |
| DIN EN 1667-1998 |
带夹紧部和法兰的六角螺母.米制细螺纹全金属螺母 |
(Prevailing torque type all hexagon nuts with flange, with metric fine pitch thread (ISO 12126:1997, modified); German version EN 1667:1997) |
| DIN EN 1668-1997 |
焊接助剂.合金钢和细晶粒钢的钨保护气体焊接用钢棒,钢丝和熔焊金属.分类 |
(Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification; German version EN 1668:1997) |
| DIN EN 1669-1997 |
铝和铝合金.检验方法.薄板和带材的端部花边检验 |
(Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip; German version EN 1669:1996) |
| DIN EN 167-2002 |
个人眼睛防护.光学试验方法 |
(Personal eye-protection - Optical test methods; German version EN 167:2001) |
| DIN EN 1670-1998 |
扣锁和建筑五金.防腐性能.要求和检验方法 |
(Building hardware - Corrosion resistance - Requirements and test methods; German version EN 1670:1998) |
| DIN EN 1671-1997 |
建筑物外压力脱水系统 |
(Pressure sewerage systems outside buildings; German version EN 1671:1997) |
| DIN EN 1672-2-1997 |
食品加工机械.基本设计原理.第2部分:卫生要求 |
(Food processing machinery - Basic concepts - Part 2: Hygiene requirements; German version EN 1672-2:1997) |
| DIN EN 1672-2-2005 |
食品加工机械.基本设计原理.第2部分:卫生要求 |
|
| DIN EN 1673-2001 |
食品加工机械.转式带支架烘箱.安全和卫生要求 |
(Food processing machinery - Rotary rack ovens - Safety and hygiene requirements; German version EN 1673:2000) |
| DIN EN 1674-2001 |
食品加工机械.面团和面糊焙烤工具.安全和卫生要求 |
(Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements; German version EN 1674:2000) |
| DIN EN 1676-1997 |
铝和铝合金.回炼用合金铝锭.规范 |
(Aluminium and aluminium alloys - Alloyed aluminium ingots for remelting - Specifications; German version EN 1676:1996) |
| DIN EN 1677-1-2000 |
吊索用部件.安全.第1部分:8级锻钢制部件 |
(Components for slings - Safety - Part 1: Forged steel components, grade 8; German version EN 1677-1:2000) |
| DIN EN 1677-2-2000 |
吊索用部件.安全.第2部分:8级锻钢制带卡齿吊钩 |
(Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, grade 8; German version EN 1677-2:2000) |
| DIN EN 1677-3-2002 |
吊索用部件.安全.第3部分:8级锻钢制自锁紧吊钩 |
(Components for slings - Safety - Part 3: Forged steel self-locking hooks, grade 8; German version EN 1677-3:2001) |
| DIN EN 1677-4-2001 |
吊索用部件.安全.第4部分:8级链环 |
(Components for slings - Safety - Part 4: Links, grade 8; German version EN 1677-4:2000) |
| DIN EN 1677-5-2001 |
吊索件.安全性.第5部分:有闩锁的锻压钢提升钩,4级 |
(Components for slings - Safety - Part 5: Forged steel lifting hooks with latch, Grade 4; German version EN 1677-5:2001) |
| DIN EN 1677-6-2001 |
吊索件.安全性.第6部分:链,4级 |
(Components for slings - Safety - Part 6: Links, Grade 4; German version EN 1677-6:2001) |
| DIN EN 1678-1998 |
食品加工机械.切菜机.安全和卫生要求 |
(Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements; German version EN 1678:1998) |
| DIN EN 1679-1-1998 |
活塞式内燃机.安全性.第1部分:柴油发动机 |
(Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines; German version EN 1679-1:1997) |
| DIN EN 168-2002 |
个人眼睛防护.非光学试验方法 |
(Personal eye-protection - Non-optical test methods; German version EN 168:2001) |
| DIN EN 1680-1997 |
塑料软管系统.聚乙烯(PE)管道系统用管件.操作机械弯曲中和弯曲后密封性的检验方法 |
(Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997) |
| DIN EN 168000-1993 |
总规范.石英晶体(含修订A1:1993) |
(Generic specification; quartz crystal units (includes amendment A1:1993); German version EN 168000:1993) |
| DIN EN 168000/A2-1998 |
总规范.压电石英.修改件A2 |
(Generic specification - Quartz crystal units; Amendment A2; German version EN 168000:1993/A2:1998) |
| DIN EN 168100-1993 |
分规范:石英晶体(性能认可) |
(Sectional specification: quartz crystal units (capability approval) (includes amendments A1 and A2:1993); German version EN 168100:1993) |
| DIN EN 168101-1992 |
石英振荡器(性能合格)空白详细规范 |
(Blank detail specification; quartz crystal units (capability approval); german version EN 168101:1992) |
| DIN EN 168200-1993 |
分规范.压电石英(结构类型认定) |
(Sectional specification; quartz crystal units (qualification approval); German version EN 168200:1993) |
| DIN EN 168201-1992 |
石英振荡器(规格合格)空白详细规范 |
(Blank detail specification; quartz crystal units (qualification approval); german version EN 168201:1992) |
| DIN EN 169-2003 |
人眼防护.焊接及有关技术用滤光镜.透射要求和推荐使用 |
(Personal eye protection - Filters for welding and related techniques - Transmittance requirements and recommended use; German version EN 169:2002) |
| DIN EN 169200-1996 |
分规范:石英振荡器(结构认可) |
(Sectional specification: Quartz crystal controlled oscillators (Qualification approval); German version EN 169200:1995) |
| DIN EN 169201-1996 |
空白详细规范:石英振荡器(结构认可) |
(Blank detail specification: Quartz crystal controlled oscillators (Qualification approval); German version EN 169201:1995) |
| DIN EN 170-2003 |
个人眼防护.紫外线滤光镜.透射要求和推荐使用 |
(Personal eye protection - Ultraviolet filters - Transmittance requirements and recommended use; German version EN 170:2002) |
| DIN EN 170000-2000 |
通用规范.波导型介电谐振器 |
(Generic specification - Waveguide type dielectric resonators; German version EN 170000:1999) |
| DIN EN 170100-2002 |
分规范.波导型介电谐振器 |
(Sectional specification - Waveguide type dielectric resonators; German version EN 170100:2001) |
| DIN EN 170101-2002 |
空白详细规范.波导型介电谐振器.能力鉴定 |
(Blank detail specification - Waveguide type dielectric resonators - Capability approval; German version EN 170101:2001) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com