标准号 |
中文名称 |
英文名称 |
DIN EN ISO 7384-1995 |
人造大气环境的腐蚀试验.一般要求 |
Corrosion test in artificial atmosphere - General requirements (ISO 7384:1986); German version EN ISO 7384:1995 |
DIN EN ISO 7389-2004 |
房屋建筑.连接件.密封件的回弹性测定 |
|
DIN EN ISO 7390-2004 |
房屋建筑.连接件.密封件的耐流动性测定 |
|
DIN EN ISO 7391-1-1999 |
塑料.聚碳酸酯模塑和挤塑材料.第1部分:命名体系和基础规范 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:1996); German version EN ISO 7391-1:1999 |
DIN EN ISO 7391-2-1999 |
塑料.聚碳酸酯模塑和挤塑材料.第2部分:试样制备和特性测定 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:1996); German version EN ISO 7391-2:1999 |
DIN EN ISO 7393-1-2000 |
水质.游离氯和氯的总含量测定.第1部分:使用N,N-二乙基-1,4-苯二胺的滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985); German version EN ISO 7393-1:2000 |
DIN EN ISO 7393-2-2000 |
水质.游离氯和氯的总含量测定.第2部分:为常规控制目的使用N,N-二乙基-1,4-苯二胺的比色法 |
Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:1985); German version EN ISO 7393-2:2000 |
DIN EN ISO 7393-3-2000 |
水质.游离氯和氯的总含量测定.第3部分:测定氯总含量的碘量滴定法 |
Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for the determination of total chlorine (ISO 7393-3:1990); German version EN ISO 7393-3:2000 |
DIN EN ISO 7405-1998 |
牙科学.牙科医疗设备生物分解性的疾病前评定.牙科材料的试验方法 |
Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials (ISO 7405:1997); German version EN ISO 7405:1997 |
DIN EN ISO 7438-2000 |
金属材料.弯曲试验 |
Metallic materials - Bend test (ISO 7438:1985); German version EN ISO 7438:2000 |
DIN EN ISO 7438-2005 |
金属材料.弯曲试验 |
|
DIN EN ISO 7439-2002 |
含铜的宫内节育避孕器具.要求、试验 |
Copper-bearing intra-uterine contraceptive devices - Requirements, tests (ISO 7439:2002); German version EN ISO 7439:2002 |
DIN EN ISO 7441-1995 |
金属和合金的腐蚀.双金属在露天暴露腐蚀试验中腐蚀的测定 |
Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests (ISO 7441:1984); German version EN ISO 7441:1995 |
DIN EN ISO 7458-2004 |
玻璃容器.耐内部压力性.试验方法 |
|
DIN EN ISO 7459-2004 |
玻璃容器.耐热冲击性和热冲击耐久性.试验方法 |
|
DIN EN ISO 748-2000 |
明渠液流的测量.速度-面积方法 |
Measurement of liquid flow in open channels - Velocity-area methods (ISO 748:1997); German version EN ISO 748:2000 |
DIN EN ISO 7488-1995 |
牙科用混汞器 |
Dental amalgamators (ISO 7488:1991); German version EN ISO 7488:1995 |
DIN EN ISO 7490-2001 |
牙科用石膏粘接铸造熔模 |
Dental gypsum-bonded casting investments (ISO 7490:2000); German version EN ISO 7490:2000 |
DIN EN ISO 7491-2001 |
牙科材料.彩色稳定性的测定 |
Dental materials - Determination of colour stability (ISO 7491:2000); German version EN ISO 7491:2000 |
DIN EN ISO 7492-1998 |
牙科用探针 |
Dental explorers (ISO 7492:1997); German version EN ISO 7492:1998 |
DIN EN ISO 7493-2000 |
牙科医生凳 |
Dental operator`s stool (ISO 7493:1997 + Technical Corrigendum 1:1999); German version EN ISO 7493:2000 |
DIN EN ISO 7494-1-2005 |
牙科学.牙科装置.第1部分:一般要求和试验方法 |
|
DIN EN ISO 7494-1997 |
牙科综合治疗设备 |
Dental units (ISO 7494:1996); German version EN ISO 7494:1997 |
DIN EN ISO 75-1-1996 |
塑料.测定耐热成型温度.第1部分:一般测试方法 |
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:1993); German version EN ISO 75-1:1996 |
DIN EN ISO 75-1-2004 |
塑料.载荷下挠曲温度的测定.第1部分:一般试验方法 |
|
DIN EN ISO 75-2-1996 |
塑料.测定耐热成型温度.第2部分:塑料和硬橡胶 |
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:1993); German version EN ISO 75-2:1996 |
DIN EN ISO 75-2-2004 |
塑料.载荷下挠曲温度的测定.第2部分:塑料和硬橡胶 |
|
DIN EN ISO 75-3-1996 |
塑料.测定耐热成型温度.第3部分:高强度热固性叠层板和长纤维增强塑料 |
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:1993); German version EN ISO 75-3:1996 |
DIN EN ISO 75-3-2004 |
塑料.载荷下挠曲温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料 |
|
DIN EN ISO 7500-1 Bb.1-1999 |
金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准.拉伸、压缩及弯曲试验机的要求、验证和校准的一般规则 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of tension, compressio |
DIN EN ISO 7500-1 Bb.2-1999 |
金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准.弹簧试验机的要求、验证和校准的一般规则 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing mach |
DIN EN ISO 7500-1 Bb.3-1999 |
金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准.疲劳试验机的要求、验收和校准的一般规则 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing mac |
DIN EN ISO 7500-1-1999 |
金属材料.静态单轴压缩试验机的验证.第1部分:拉伸/压缩试验机.测力系统的验证与校准 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system (ISO 7500-1:1999); German version EN ISO 7500-1:1999 |
DIN EN ISO 7500-1-2004 |
金属材料.静态单轴向试验机的验证.第1部分:拉伸/压缩试验机.力测量系统的验证和校正 |
|
DIN EN ISO 7500-2-1999 |
金属材料.静态单轴应力试验机的校验.第2部分:拉伸应力的蠕变试验机.试验力的校验 |
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines; verification of the applied load (ISO 7500-2:1996); German version EN ISO 7500-2:1999 |
DIN EN ISO 7536-1996 |
石油产品.汽油耐氧化性测定.诱导期方法 |
Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994); German version EN ISO 7536:1996 |
DIN EN ISO 7539-1-1995 |
金属和合金的腐蚀.腐蚀应力试验.第1部分:试验程序的通用指南 |
Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:1987); German version EN ISO 7539-1:1995 |
DIN EN ISO 7539-2-1995 |
金属和合金的腐蚀.应力腐蚀试验.第2部分:弯曲梁试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimen (ISO 7539-2:1989); German version EN ISO 7539-2:1995 |
DIN EN ISO 7539-3-1995 |
金属和合金的耐腐蚀性.应力腐蚀试验.第3部分:U型弯曲试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens (ISO 7539-3:1989); German version EN ISO 7539-3:1995) |
DIN EN ISO 7539-4-1995 |
金属和合金的腐蚀.应力腐蚀试验.第4部分:单向载荷拉伸试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens (ISO 7539-4:1989); German version EN ISO 7539-4:1995) |
DIN EN ISO 7539-5-1995 |
金属和合金的腐蚀.应力腐蚀试验.第5部分:C-环形试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens (ISO 7539-5:1989); German version EN ISO 7539-5:1995) |
DIN EN ISO 7539-6-2003 |
金属和合金的腐蚀.应力腐蚀试验.第6部分:预断裂试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens (ISO 7539-6:2003); German version EN ISO 7539-6:2003) |
DIN EN ISO 7539-7-1995 |
金属和合金的腐蚀.应力腐蚀试验.第7部分:慢速应变率试验 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing (ISO 7539-7:1989); German version EN ISO 7539-7:1995) |
DIN EN ISO 7539-7-2005 |
金属与合金的腐蚀.应力腐蚀试验.第7部分:慢速率应力试验方法 |
|
DIN EN ISO 7551-1998 |
牙科吸收点 |
(Dental absorbent points (ISO 7551:1996); German version EN ISO 7551:1998) |
DIN EN ISO 7579-1996 |
染料.有机溶剂溶解度的测定.重量法电影摄影.在打过8mmS型影像区域.位置和尺寸 |
Dyestuffs - Determination of solubility in organic solvents - Gravimetric method (ISO 7579:1990); German version EN ISO 7579:1996 |
DIN EN ISO 7590-2001 |
钢丝输送带.总厚度和覆层厚度的测量方法 |
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2001); German version EN ISO 7590:2001 |
DIN EN ISO 7622-1-1995 |
钢丝芯线输送机皮带.纵向牵引试验.第1部分:伸长的测量 |
Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:1984); German version EN ISO 7622-1:1995 |
DIN EN ISO 7622-2-1995 |
钢丝芯线输送机皮带.纵向牵引试验.第2部分:抗拉强度的测量 |
Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:1984); German version EN ISO 7622-2:1995 |
DIN EN ISO 7623-1997 |
钢丝绳输送机皮带.钢丝绳和芯层间粘合.交货状态检验和热处理后的检验 |
Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:1996); German version EN ISO 7623:1997 |
DIN EN ISO 7662-1996 |
橡胶和塑料软管.内衬磨损的测定 |
Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988); German version EN ISO 7662:1996 |
DIN EN ISO 7686-2005 |
塑料管和配件.不透明度的测定 |
|
DIN EN ISO 7711-1-1998 |
牙科用旋转器械.金刚钻器具.第1部分:尺寸,要求,标识和包装 |
Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997); German version EN ISO 7711-1:1998 |
DIN EN ISO 7711-2-1995 |
牙科用旋转器械.金刚钻器具.第2部分:圆盘刀 |
Dental rotary instrument - Diamond instruments - Part 2: Discs (ISO 7711-2:1992); German version EN ISO 7711-2:1995 |
DIN EN ISO 7711-3-1995 |
牙科用旋转器械.金刚钻器具.第3部分:磨粒尺寸、名称与符号和彩色编码 |
Dental rotary instruments - Diamond instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:1992); German version EN ISO 7711-3:1995 |
DIN EN ISO 7711-3-2005 |
牙医学.金刚钻旋转器械.第3部分:磨粒尺寸、名称与符号和色码 |
|
DIN EN ISO 7719-1998 |
1型通用扭矩六角螺母(全金属螺母). 强度等级5,8和10 |
Prevailing torque type (all-metal hexagon nuts), style 1 - Property classes 5, 8 and 10 (ISO 7719:1997); German version EN ISO 7719:1997 |
DIN EN ISO 772-2000 |
液体比重计测定.词汇和符号 |
Hydrometric determinations - Vocabulary and symbols (ISO 772:1996); German version EN ISO 772:2000 |
DIN EN ISO 772/A1-2004 |
水文测定.词汇和符号 |
(Hydrometric determinations - Vocabulary and symbols (ISO 772:1996/Amd 1:2002); German version EN ISO 772:2000/A1:2003) |
DIN EN ISO 772/A1-2004 |
水文测定.词汇和符号 |
|
DIN EN ISO 7721-2-1994 |
沉头螺钉.第2部分:十字槽 |
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990); German version EN ISO 7721-2:1994 |
DIN EN ISO 7726-2002 |
热环境的人类工效学.物理量测量仪器 |
Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001 |
DIN EN ISO 7730-1995 |
中等热环境.对热舒适度预测平均通过(PMV)和预测不满意百分率(PPD)的测定及条件规范 |
Moderate thermal environments - Determination of the PMV and PPD indices and specification of the conditions for thermal comfort (ISO 7730:1994); German version EN ISO 7730:1995 |
DIN EN ISO 7731-2005 |
人类功效学.公共和工作场所险情信号.险情听觉信号(ISO 7731-2003);德文版本 EN ISO 7731-2005 |
|
DIN EN ISO 7751-1997 |
橡胶和塑料软管及软管管道.试验压力和爆破压力与设计工作压力的比值 |
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991); German version EN ISO 7751:1997 |
DIN EN ISO 7765-1-2004 |
塑料薄膜和薄板.自由落体法测定抗冲击性.第1部分:梯级法 |
|
DIN EN ISO 7779-2002 |
声学.信息技术设备和电信设备排放的空气噪声的测量 |
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:1999); German version EN ISO 7779:2001 |
DIN EN ISO 7783-1-1999 |
涂层材料.水蒸气渗透率的测定.第1部分:游离膜用皮层法 |
Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998); German version EN ISO 7782-1:1999 |
DIN EN ISO 7783-2-1999 |
涂料和清漆.外部砖石工程和混凝土用涂覆材料和涂覆系统.第2部分:水蒸气渗透率的测定和分类 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999); German version EN ISO 7783-2:1999 |
DIN EN ISO 7785-1-1999 |
手持式牙科器械.第1部分:高速空气涡轮手持器械 |
Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997); German version EN ISO 7785-1:1999 |
DIN EN ISO 7785-2-1998 |
手持式牙科器械.第2部分:平角和啮合角手持式器械 |
Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995); German version EN ISO 7785-2:1997 |
DIN EN ISO 7786-2001 |
牙科用旋转器械.实验室研磨器械 |
Dental rotary instruments - Laboratory abrasive instruments (ISO 7786:2001); German version EN ISO 7786:2001 |
DIN EN ISO 7787-2-2001 |
牙科用旋转器械.切割刀具.第2部分:实验室用硬质合金刀具 |
Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000); German version EN ISO 7787-2:2000 |
DIN EN ISO 7787-4-2002 |
牙科用旋转器械.切割刀具.第4部分:技工室用小型硬质合金刀具 |
Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters (ISO 7787-4:2002); German version EN ISO 7787-4:2002 |
DIN EN ISO 7792-1-2004 |
塑料.热塑性聚酯模塑和挤压材料.第1部分:名称与符号系统和基本规范 |
|
DIN EN ISO 7792-2-2004 |
塑料.热塑性聚酯模塑和挤压材料.第2部分:试验样品的制备和性能测定 |
|
DIN EN ISO 7799-2000 |
金属材料.厚度3mm或小于3mm的板材或带材.反向弯曲试验 |
Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000 |
DIN EN ISO 780-1999 |
包装.货物搬运用图形标志 |
Packaging - Pictorial marking for the handling of goods (ISO 780:1997); German version EN ISO 780:1999 |
DIN EN ISO 7808-1998 |
塑料.热固性模塑材料.输送流的测定 |
Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992); German version EN ISO 7808:1998 |
DIN EN ISO 7822-2000 |
玻璃纤维增强塑料.空隙量测定.灼烧损失、机械粉碎和静态计数法 |
Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990); German version EN ISO 7822:1999 |
DIN EN ISO 7823-1-2000 |
塑料.聚甲基丙烯酸甲酯板.型号、尺寸和特性.第1部分:铸板 |
Plastic - Poly(methyl methacrylate) sheet; Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:1998); German version EN ISO 7823-1:2000 |
DIN EN ISO 7823-2-1997 |
塑料.甲基丙烯酸甲酯板.型号,尺寸和特性.第2部分:熔化压延的积压板 |
Plastics - Poly(methyl methacrylate) sheets; types, dimensions and characteristics - Part 2: Melt-calendered extruded sheets (ISO 7823-2:1996); German version EN ISO 7823-2:1996 |
DIN EN ISO 7823-3-2004 |
塑料.聚甲基丙烯酸甲酯薄板.类型、尺寸和特性.第3部分:连续浇铸板 |
|
DIN EN ISO 7827-1996 |
水质.含水介质中有机物的充分需氧生物降解性测定.分析溶解的有机矿物质的方法 |
Water quality - Evaluation in an aqueous medium of the ultimate aerobic biodegradability of organic compounds - Method by analysis of dissolved organic carbon (DOC) (ISO 7827:1994); German version EN ISO 7827:1995 |
DIN EN ISO 7837-2000 |
肥料.细粒肥料容积密度的测定 |
Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992); German version EN ISO 7837:2000 |
DIN EN ISO 7840 Berichtigung 1-2001 |
DIN EN ISO 7840-1995的勘误 |
Corrigendum to DIN EN ISO 7840:1995 (German version EN ISO 7840:1995/A1:2000) |
DIN EN ISO 7840-1995 |
小艇.抗燃烧燃料软管 |
Small craft - Fire-resistant fuel hoses (ISO 7840:1994); German version EN ISO 7840:1995 |
DIN EN ISO 7840-2004 |
小艇.耐火燃油软管 |
|
DIN EN ISO 7854-1997 |
橡胶或塑料涂层织物.抗折曲损坏性的测定 |
Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995); German version EN ISO 7854:1997 |
DIN EN ISO 7864-1996 |
一次性使用无菌皮下注射针头 |
Sterile hypodermic needles for single use (ISO 7864:1993); German version EN ISO 7864:1995 |
DIN EN ISO 787-13-2002 |
颜料和体质染料的通用试验方法.第13部分:水溶性硫酸盐、氯化物和硝酸盐的测定 |
General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulphates, chlorides and nitrates (ISO 787-13:2002); German version EN ISO 787-13:2002 |
DIN EN ISO 787-14-2002 |
颜料和体质染料的通用试验方法.第14部分:水萃取物电阻率的测定 |
General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2002); German version EN ISO 787-14:2002 |
DIN EN ISO 787-19-1995 |
颜料和填料的一般试验方法.第19部分:水溶性硝酸盐的测定(水杨酸法) |
General methods of test for pigments and extenders - Part 19: Determination of water-soluble nitrates (salicylic acid method) (ISO 787-19:1974); German version EN ISO 787-19:1995 |
DIN EN ISO 787-2-1995 |
颜料和填充剂的一般试验方法.第2部分:在105 ℃挥发物的测定 |
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 C (ISO 787-2:1981); German version EN ISO 787-2:1995 |
DIN EN ISO 787-3-2001 |
颜料和填充剂的一般试验方法.第3部分:水溶物的测定.热萃取法 |
General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water; Hot extraction method (ISO 787-3:2000); German version EN ISO 787-3:2000 |
DIN EN ISO 787-8-2001 |
颜料和填充剂的一般试验方法.第8部分:水溶物的测定.冷萃取法 |
General methods of test for pigments and extenders - Part 8: Determination of matter soluble in water; Cold extraction method (ISO 787-8:2000); German version EN ISO 787-8:2000 |
DIN EN ISO 787-9-1995 |
颜料和填充剂的一般试验方法.第9部分:水悬浮液pH值的测定 |
General methods of test for pigments and extenders - Part 9: Determination of pH value of an aqueous suspension (ISO 787-9:1981); German version EN ISO 787-9:1995 |
DIN EN ISO 7885-2001 |
一次性无菌牙科用注射针头 |
Sterile dental injection needles for single-use (ISO 7885:2000); German version EN ISO 7885:2000 |
DIN EN ISO 7886-1-1997 |
一次性使用无菌皮下注射器.第1部分:人工注射器 |
Sterile hypodermic syringes for single use - Part 1: Syringes for manual use (ISO 7886-1:1993, including Technical Corrigendum 1:1995); German version EN ISO 7886-1:1996 |
DIN EN ISO 7886-2-1997 |
一次性使用无菌皮下注射器.第1部分:带动力注射泵的注射器 |
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1997); German version EN ISO 7886-2:1997 |
DIN EN ISO 7886-3-2005 |
一次性使用无菌皮下注射器.第3部分:固定剂量免疫接种用自动报废注射器 |
|
DIN EN ISO 7886-3-2005 |
一次性使用无菌皮下注射器.第3部分:固定剂量免疫接种用自动报废注射器 |
|
DIN EN ISO 7886-3-2005 |
一次性使用无菌皮下注射器.第3部分:固定剂量免疫接种用自动报废注射器 |
|
DIN EN ISO 7887-1994 |
水的质量.水的颜色检验和测定 |
Water quality - Examination and determination of colour (ISO 7887:1994); German version EN ISO 7887:1994 |
DIN EN ISO 7899-1-1999 |
水质.表面水和废水中肠球菌的检测和计数.第1部分:通过液体介质中接种的微型法 |
Water quality - Detection and enumeration of intestinal enterococci in surface and waste water - Part 1: Miniaturized method (most probable number) by inoculation in liquid medium (ISO 7899-1:1998); German version EN ISO 7899-1:1998 |
DIN EN ISO 7899-2-2000 |
水质.粪便链球菌的检测和计数.第2部分:薄膜过滤法 |
Water quality - Detection and enumeration of intestinal enterococci - Part 2: Membrane filtration method (ISO 7899-2:2000); German version EN ISO 7899-2:2000 |
DIN EN ISO 7932-1998 |
微生物学.蜡状芽孢杆菌计数的一般指导.30°C时的菌落计数技术 |
Microbiology - General guidance for the enumeration of Bacillus cereus - Colony-count technique at 30 C (ISO 7932:1993, including Technical Corrigendum 1:1997) |
DIN EN ISO 7933-2004 |
热环境的人类工效学.通过计算预热应力对热应力的分析测定和说明 |
|
DIN EN ISO 7937-2004 |
食品和动物饲料的微生物学.梭菌属计数的水平方法.菌落计数技术 |
|
DIN EN ISO 7944-1998 |
光学和光学仪器.基准波长 |
Optics and optical instruments - Reference wavelengths (ISO 7944:1998); German version EN ISO 7944:1998 |
DIN EN ISO 7965-2-1996 |
包装.包装袋.坠落试验.第2部分:由柔性热塑性塑料簿膜制成的包装袋 |
Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2:1993); German version EN ISO 7965-2:1996 |
DIN EN ISO 7980-2000 |
水质.钙和镁的测定.原子吸收光谱测定法 |
Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method (ISO 7980:1986); German version EN ISO 7980:2000 |
DIN EN ISO 7998-1996 |
光学和光学仪器.眼镜框架.等义术语表及词汇 |
Optics and optical instruments - Spectacle frames - Vocabulary and list of equivalent terms (ISO 7998:1984); German version EN ISO 7998:1996 |
DIN EN ISO 801-1-1996 |
纸浆.成批销售质量的测定.第1部分:板式包装纸浆 |
Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form (ISO 801-1:1994); German version EN ISO 801-1:1996 |
DIN EN ISO 801-3-1996 |
纸浆.成批销售质量的测定.第3部分:大宗包装 |
Pulps - Determination of saleable mass in lots - Part 3: Unitized baled (ISO 801-3:1994); German version EN ISO 801-3:1996 |
DIN EN ISO 8028-2000 |
无气涂料喷射用橡胶和/或塑料软管组件.规范 |
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999); German version EN ISO 8028:2000 |
DIN EN ISO 8030-1998 |
橡胶和塑料软管.易燃烧性试验方法 |
Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995); German version EN ISO 8030:1997 |
DIN EN ISO 8031-1997 |
橡胶和塑料软管和软管组件.电阻的测定 |
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance (ISO 8031:1993); German version EN ISO 8031:1997 |
DIN EN ISO 8032-1999 |
橡胶和塑料软管组件.带液压脉冲试验的组合式弯曲(半Ω 型试验) |
Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999 |
DIN EN ISO 8044-1999 |
金属及合金的腐蚀特性.基本术语与定义 |
Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:1999); Trilingual version EN ISO 8044:1999 |