标准号 |
中文名称 |
英文名称 |
| DIN EN 12479-2002 |
架空线用木杆.尺寸.测量方法和极限偏差 |
(Wood poles for overhead lines - Sizes - Methods of measurements and limit deviations; German version EN 12479:2001) |
| DIN EN 1248-2002 |
铸造机械.喷砂设备的安全要求 |
(Foundry machinery - Safety requirements for abrasive blasting equipment; German version EN 1248:2001) |
| DIN EN 12480-2002 |
煤气表.旋转位移式煤气表 |
(Gas meters - Rotary displacement gas meters; German version EN 12480:2002) |
| DIN EN 12481-2001 |
自粘带.术语 |
(Self adhesive tapes - Terminology; German version EN 12481:2000) |
| DIN EN 12482-1-1998 |
铝和铝合金.通用粗轧带材.第1部分:热轧粗轧带材的规范 |
(Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock; German version EN 12482-1:1998) |
| DIN EN 12482-2-1998 |
铝和铝合金.通用粗轧带材.第2部分:冷轧粗轧带材的规范 |
(Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock; German version EN 12482-2:1998) |
| DIN EN 12483-1999 |
液泵.带频率变换器的甭组件.保证试验和相容性试验 |
(Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests; German version EN 12483:1999) |
| DIN EN 12484-1-1999 |
灌溉方法.自动草坪灌溉系统.第1部分:由所有者确定设备和任务 |
(Irrigation techniques - Automatic turf irrigation systems - Part 1: Definition of the programme of equipment of the owner; German version EN 12484-1:1999) |
| DIN EN 12484-2-2000 |
灌溉技术.自动草坪灌溉系统.第2部分:典型技术模板的设计和定义 |
(Irrigation techniques - Automatic turf irrigation systems - Part 2: Design and definition of typical technical templates; German version EN 12484-2:2000) |
| DIN EN 12484-3-2000 |
灌溉技术.自动草坪灌溉系统.第3部分:自动控制和系统管理 |
(Irrigation techniques - Automatic turf irrigation systems - Part 3: Automatic control and system management; German version EN 12484-3:2000) |
| DIN EN 12484-4-2003 |
灌溉技术.自动草坪灌溉系统.第4部分:安装和验收 |
(Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and acceptance; German version EN 12484-4:2002) |
| DIN EN 12484-5-2002 |
灌溉技术.自动草坪灌溉系统.第5部分:系统的试验方法 |
(Irrigation techniques - Automatic turf irrigation systems - Part 5: Testing methods of systems; German version EN 12484-5:2002) |
| DIN EN 12485-2001 |
饮用水处理用化学品.碳酸钙、高生石灰和半煅烧白云石.试验方法 |
(Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime and half-burnt dolomite - Test methods; German version EN 12485:2001) |
| DIN EN 12487-2000 |
金属的腐蚀防护.经清洗和没有清洗的铝及铝合金上的铬酸盐转化涂层 |
(Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys; German version EN 12487:2000) |
| DIN EN 12489-2000 |
工业、商业用汽车库门.耐水渗透特性.试验方法 |
(Industrial, commercial and garage doors and gates - Resistance to water penetration - Test methods; German version EN 12489:2000) |
| DIN EN 12490-1999 |
木材和复合木材制品的耐久性.用木材防护剂处理过的实木.处理过的木材中沥青浸渍油的渗入厚度和吸收的测定 |
(Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood; German version EN 12490:1998) |
| DIN EN 12491-2001 |
降落滑翔设备.紧急降落伞.安全要求和试验方法 |
(Paragliders equipment - Emergency parachutes - Safety requirements and test methods; German version EN 12491:2001) |
| DIN EN 12492-2003 |
登山设备.登山运动员用的防护帽.安全要求和试验方法(包括修改A1:2002) |
(Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods (includes Amendment A1:2002); German version EN 12492:2000 + A1:2002) |
| DIN EN 12493-2001 |
液化石油气(LPG)用焊接钢罐.槽罐车.设计和生产 |
(Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture; German version EN 12493:2001) |
| DIN EN 12495-2000 |
固定钢近海结构的阴极保护 |
(Cathodic protection for fixed steel offshore structures; German version EN 12495:2000) |
| DIN EN 12498-2005 |
纸和纸板.与食物接触的纸和纸板.水萃取物中镉和铅含量的测定 |
|
| DIN EN 12499-2003 |
金属结构的内部阴极保护 |
(Internal cathodic protection of metallic structures; German version EN 12499:2003) |
| DIN EN 125-1996 |
煤气设备的火焰监控装置.热电点火安全装置 |
(Flame supervision devices for gas burning appliances - Thermo-electric flame supervision devices; German version EN 125:1991 + A1:1996) |
| DIN EN 12500-2000 |
金属材料的防腐蚀.大气环境下的腐蚀概率.大气环境腐蚀性的分类、测定和评估 |
(Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments; German version EN 12500:2000) |
| DIN EN 125000-1998 |
总规范.铁氧体铁芯 |
(Generic specification - Cores made of ferrite materials; German version EN 125000:1997) |
| DIN EN 12501-1-2003 |
金属材料防腐措施.土壤中腐蚀可能性.第1部分:总则 |
(Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General; German version EN 12501-1:2003) |
| DIN EN 12501-2-2003 |
金属材料防腐措施.土壤中腐蚀可能性.第2部分:低合金和非合金黑色金属材料 |
(Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials; German version EN 12501-2:2003) |
| DIN EN 12503 Bb.1-2003 |
体育运动用垫子.认证 |
(Sports mats - Certification) |
| DIN EN 12503-1-2003 |
运动垫.第1部分:体操运动垫.安全要求 |
(Sports mats - Part 1: Gymnastic mats, safety requirements (includes Corrigendum AC:2002); German version EN 12503-1:2001 + AC:2002) |
| DIN EN 12503-2-2003 |
运动垫.第2部分:撑杆跳和跳高垫.安全要求 |
(Sports mats - Part 2: Pole vault and high jump mats, safety requirements (includes Corrigendum AC:2002); German version EN 12503-2:2001 + AC:2002) |
| DIN EN 12503-3-2001 |
运动垫.第3部分:柔道垫.安全要求 |
(Sports mats - Part 3: Judo mats; Safety requirements; German version EN 12503-3:2001) |
| DIN EN 12503-4-2001 |
运动垫.第4部分:减震的测定 |
(Sport mats - Part 4: Determination of shock absorption; German version EN 12503-4:2001) |
| DIN EN 12503-5-2001 |
运动垫.第5部分:基本摩擦的测定 |
(Sport mats - Part 5: Determination of the base friction; German version EN 12503-5:2001) |
| DIN EN 12503-6-2001 |
运动垫.第6部分:顶摩擦的测定 |
(Sports mats - Part 6: Determination of the top friction; German version EN 12503-6:2001) |
| DIN EN 12503-7-2001 |
运动垫.第7部分:静态硬挺度的测定 |
(Sports mats - Part 7: Determination of static stiffness; German version EN 12503-7:2001) |
| DIN EN 12504-1-2000 |
结构中的混凝土试验.第1部分:起棱纹的试样.取样、检查和压缩试验 |
(Testing concrete in structures - Part 1: Cored specimens; taking, examining, and testing in compression; German version EN 12504-1:2000) |
| DIN EN 12504-2-2001 |
结构中的混凝土试验.第2部分:无损检验.回弹数的测定 |
(Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number; German version EN 12504-2:2001) |
| DIN EN 12504-4-2004 |
结构中的混凝土试验.第4部分:超音波脉冲速率的测定 |
|
| DIN EN 12505-2001 |
食品加工机械.加工食用油脂用的离心机.安全和卫生要求 |
(Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements; German version EN 12505:2000) |
| DIN EN 12506-2003 |
废物表征.提取物的分析.pH值、As、Ba、Cd、CI、Co、Cr、Cr(VI)、Cu、Mo、Ni、NO、Pb、硫总量、SO2、V和Zn含 |
(Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, CI, Co, Cr, Cr(VI), Cu, Mo, Ni, NO, Pb, total S, SO2, V and Zn; German version EN 12506:2003) |
| DIN EN 12507-1999 |
运输业.道路运输、存储和和配售业的ENISO9002使用指南 |
(Transport services - Guidance notes on the application of EN ISO 9002 to the road transportation, storage and distribution industries; German version EN 12507:1999) |
| DIN EN 12507-2005 |
运输业务.EN ISO9002-2000在道路运输、储存、配送和铁路货运业的应用指南 |
|
| DIN EN 12508 Berichtigung 1-2001 |
DINEN12508:2000-09的勘误 |
(Corrigendum to DIN EN 12508:2000-09) |
| DIN EN 12508-2000 |
金属和合金的防腐保护.金属和其它有机涂层的表面处理.词汇 |
(Corrosion protection of metals and alloys - Surface treatment, metallic and other non-organic coatings - Vocabulary; German version EN 12508:2000) |
| DIN EN 12509-2002 |
架空线用木杆的试验方法.测定弹性模量、粘结强度、密度和含水量的试验方法 |
(Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content; German version EN 12509:2001) |
| DIN EN 1251-1-2000 |
低温容器.容量不超过1000升的可移动的真空绝缘容器.第1部分:基本要求.德文版本EN1251-1:2000 |
(Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements; German version EN 1251-1:2000) |
| DIN EN 1251-2-2000 |
低温容器.容量不超过1000升的可移动的真空绝缘容器.第2部分:设计,构造,检验和试验.德文版本EN1251-2:2000 |
(Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000) |
| DIN EN 1251-3-2000 |
低温容器.容量不超过1000升的可移动的真空绝缘容器.第3部分:操作要求.德文版本EN1251-3:2000 |
(Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements; German version EN 1251-3:2000) |
| DIN EN 12510-2002 |
架空线用木杆.强度分级标准 |
(Wood poles for overhead lines - Strength grading criteria; German version EN 12510:2001 + AC:2002) |
| DIN EN 125100-1993 |
分规范.电感线圈中的磁氧体铁芯 |
(Sectional specification: magnetic oxide cores for inductor applications; german version EN 125100:1991) |
| DIN EN 12511-2002 |
架空线用木杆.特征值的测定 |
(Wood poles for overhead lines - Determination of characteristic values; German version EN 12511:2001) |
| DIN EN 12512-2002 |
木结构.试验方法.机械紧固件接头的循环试验 |
(Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners; German version EN 12512:2001) |
| DIN EN 12512-2005 |
木结构.试验方法.机械紧固件接头的循环试验 |
|
| DIN EN 12513-2001 |
铸造.耐磨铸铁 |
(Founding - Abrasion resistant cast irons; German version EN 12513:2000) |
| DIN EN 12514-1-2000 |
油燃烧器供油系统的安装.第1部分:安全要求和试验.部件,供油泵.控制和安全装置.供油罐 |
(Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests; parts, oil feed pumps, control and safety devices, supply tanks; German version EN 12514-1:2000) |
| DIN EN 12514-2-2000 |
油燃烧器供油系统的安装.第1部分:安全要求和试验.部件,阀门管道,过滤器,油空气分离器,油量计 |
(Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; parts, valves pipes, filters, oil de-aerators, meters; German version EN 12514-2:2000) |
| DIN EN 12515-1997 |
热环境.利用要求湿度的计算对热应力进行分析测定和评估 |
(Hot environments - Analytical determination and interpretation of thermal stress using calculation of required sweat rate (ISO 7933:1989, modified); German version EN 12515:1997) |
| DIN EN 12516-2-2004 |
工业用阀.外壳设计强度.第2部分:钢阀外壳的计算方法 |
|
| DIN EN 12516-3-2003 |
阀门.外壳设计强度.第3部分:实验方法 |
(Valves - Shell design strength - Part 3: Experimental method; German version EN 12516-3:2002) |
| DIN EN 12517-2003 |
焊缝的无损检验.焊接接头的X光透视检验.允许极限值 |
(Non-destructive examination of welds - Radiographic testing of welded joints - Acceptance levels; German version EN 12517:1998 + A1:2002) |
| DIN EN 12518-2000 |
人类饮用水处理用化学试剂.高钙石灰 |
(Chemicals used for treatment of water intended for human consumption - High-calcium lime; German version EN 12518:2000) |
| DIN EN 12519-2004 |
窗户和行人用门.术语 |
|
| DIN EN 1252-1 Berichtigung 1-1999 |
对DINEN1252-1:1998-05的校正 |
(Corrigenda to DIN EN 1252-1:1998-05 (EN 1252-1:1998/AC:1998)) |
| DIN EN 1252-1-1998 |
低温容器.材料.第1部分:温度为-80℃以下对粘度的要求 |
(Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below80C; German version EN 1252-1:1998) |
| DIN EN 1252-2-2001 |
深冷容器.材料.第2部分:温度在摄氏-80度和-20度之间的韧性要求.德文版EN1252-2-2001 |
(Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 鳦 and -20 鳦; German version EN 1252-2:2001) |
| DIN EN 125200-1993 |
分规范.线性变压器用磁氧体铁芯 |
(Sectional specification: magnetic oxide cores for linear transformers; german version EN 125200:1991) |
| DIN EN 12522-1-1998 |
搬家服务.私人搬家.第1部分:服务规范 |
(Furniture removal activities - Furniture removal for private individuals - Part 1: Service specification; German version EN 12522-1:1998) |
| DIN EN 12522-2-1998 |
搬家服务.私人搬家.第2部分:服务准备 |
(Furniture removal activities - Furniture removal for private individuals - Part 2: Provision of service; German version EN 12522-2:1996) |
| DIN EN 12523-1999 |
外侧四肢假肢和外侧矫形假肢.要求和检验方法 |
(External limb prostheses and external orthoses - Requirements and test methods; German version EN 12523:1999) |
| DIN EN 12524-2000 |
建筑材料和产品.水热性能.表列设计值 |
(Building materials and products - Hygrothermal properties - Tabulated design values; German version EN 12524:2000) |
| DIN EN 12525-2000 |
农业机械.前端装载机.安全;德文版本EN12525:2000 |
(Agricultural machinery - Front loaders - Safety; German version EN 12525:2000) |
| DIN EN 12526-1999 |
脚轮和轮子.词汇,建议用符号和多语种词表 |
(Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary; German version EN 12526:1998) |
| DIN EN 12527-1999 |
脚轮和轮子.检验方法和检验设备 |
(Castors and wheels - Test methods and apparatus; German version EN 12527:1998) |
| DIN EN 12528-1999 |
脚轮和轮子.家具用脚轮.要求 |
(Castors and wheels - Castors for furniture - Requirements; German version EN 12528:1998) |
| DIN EN 12529-1999 |
脚轮和轮子.家具用脚轮.转椅用脚轮.要求 |
(Castors and wheels - Castors for furniture - Castors for swivel chairs - Requirements; German version EN 12529:1998) |
| DIN EN 1253-1-1999 |
建筑物的排污道.第1部分;要求 |
(Gullies for buildings - Part 1: Requirements; German version EN 1253-1:1999) |
| DIN EN 1253-2-1999 |
建筑物的排污道.第2部分:试验方法 |
(Gullies for buildings - Part 2: Test methods; German version EN 1253-2:1998) |
| DIN EN 1253-2-2004 |
建筑物的集水沟.第2部分:试验方法 |
|
| DIN EN 1253-3-1999 |
建筑物的排污道.第3部分:质量控制 |
(Gullies for buildings - Part 3: Quality control; German version EN 1253-3:1999) |
| DIN EN 1253-4-2000 |
建筑物的排污道.第4部分:入口封盖物 |
(Gullies for buildings - Part 4: Access covers; German version EN 1253-4:1999) |
| DIN EN 1253-5-2004 |
建筑物用集水沟.第5部分:可截流轻液体的集水沟 |
|
| DIN EN 12530-1999 |
脚轮和轮子.器具的轮子.手动操作的脚轮和轮子 |
(Castors and wheels - Castors and wheels for manually propelled institutional applications; German version EN 12530:1998) |
| DIN EN 12531-1999 |
脚轮和轮子.病床用脚轮 |
(Castors and wheels - Hospital bed castors; German version EN 12531:1998) |
| DIN EN 12532-1999 |
脚轮和轮子.速度在1,1米/秒(4公里/小时)以下的运输装置用轮子 |
(Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h); German version EN 12532:1998) |
| DIN EN 12533-1999 |
脚轮和轮子.速度在1,1米/秒(4公里/小时)以上,4,4米/秒(16公里/小时)以下的重负载轮子 |
(Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h); German version EN 12533:1998) |
| DIN EN 12534-1999 |
焊料.高强度钢的气体保护金属极电弧焊接用焊丝电极、焊丝、焊条和沉积金属.分类 |
(Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification; German version EN 12534:1999) |
| DIN EN 12535-2000 |
焊接材料.高强度钢的气体保护金属电弧焊接用管状芯电极.分类 |
(Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification; German version EN 12535:2000) |
| DIN EN 12536-2000 |
焊料.非合金钢和抗蠕变钢的气体焊接用焊条.分类 |
(Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification; German version EN 12536:2000) |
| DIN EN 1254-1-1998 |
铜和铜合金.管配件.第1部分:铜管用毛细钎焊管件(软钎焊和硬钎焊) |
(Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes; German version EN 1254-1:1998) |
| DIN EN 1254-2-1998 |
铜和铜合金.管配件.第2部分:铜管用夹紧连接 |
(Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes; German version EN 1254-2:1998) |
| DIN EN 1254-3-1998 |
铜和铜合金.管配件.第3部分:塑料管用夹紧连接 |
(Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes; German version EN 1254-3:1998) |
| DIN EN 1254-4 Berichtigung 1-2000 |
DINEN1254-4-1998的勘误 |
(Corrigenda to DIN EN 1254-4:1998-03 (EN 1254-4:1998/AC:1999)) |
| DIN EN 1254-4-1998 |
铜和铜合金.管配件.第4部分:毛细钎焊连接或夹紧连接端头与其它结构相连用管件 |
(Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; German version EN 1254-4:1998) |
| DIN EN 1254-5-1998 |
铜和铜合金.管配件.第5部分:用毛细硬钎焊连接铜管用带小端头插件的管件 |
(Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes; German version EN 1254-5:1998) |
| DIN EN 12540-2000 |
金属的腐蚀防护.镍、镍加铬、铜加镍和铜加镍加铬的电解镀层 |
(Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium; German version EN 12540:2000) |
| DIN EN 125400-1993 |
分规范.线圈和调谐变压器中的磁氧体铁芯 |
(Sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers; german version EN 125400:1991) |
| DIN EN 125401-1993 |
空白详细规范.线圈和调谐变压器中磁氧体铁芯的调整器 |
(Blank detail specification: adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers; german version EN 125401:1991) |
| DIN EN 12541-2003 |
卫生便池.压力冲洗阀和自动关闭便池冲水阀 |
(Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10; German version EN 12541:2002) |
| DIN EN 12542-2002 |
安装在地面上的储存容量不超过13M的系列生产的液化石油气储存用固定焊接的圆柱型钢罐.设计和制造 |
(Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m and for installation above ground - Design and manufacture; German version EN 12542:2002) |
| DIN EN 12542-2005 |
的系列生产的液化石油气储存用固定焊接的圆柱形钢罐.设计和制造 |
DIN EN 12542-2005 |
| DIN EN 12543-1-1999 |
无损检验.无损检验用工业X射线系统中焦点的特性.第1部分:扫描法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method; German version EN 12543-1:1999) |
| DIN EN 12543-2-1999 |
无损检验.无损检验用工业X射线系统中焦点的特性.第2部分:针孔照相机射线摄影法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method; German version EN 12543-2:1999) |
| DIN EN 12543-3-1999 |
无损检验.无损检验用工业X射线系统中焦点的特性.第2部分:狭缝照相机射线摄影法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method; German version EN 12543-3:1999) |
| DIN EN 12543-4-1999 |
无损检验.无损检验用工业X射线系统中焦点的特性.第4部分:边缘法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method; German version EN 12543-4:1999) |
| DIN EN 12543-5-1999 |
无损检验.无损检验用工业X射线系统中焦点的特性.第5部分:最小和最大聚焦X射线电子管的有效焦点尺寸的测量 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes; German version EN 12543-5:1999) |
| DIN EN 12544-1-1999 |
无损检验.X射线电子管电压的测量和评估.第1部分:分压器法 |
(Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method; German version EN 12544-1:1999) |
| DIN EN 12544-2-2000 |
无损试验.X射线管电压的评估和测量.第2部分:用厚滤膜法连续检验.德文版本EN12544-2:2000 |
(Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method; German version EN 12544-2:2000) |
| DIN EN 12544-3-1999 |
无损检验.X射线电子管电压的测量和评估.第2部分:光谱测定法 |
(Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method; German version EN 12544-3:1999) |
| DIN EN 12545-2000 |
鞋靴、皮革和人造革制品生产机械.噪声试验规程.通用要求 |
(Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements; German version EN 12545:2000) |
| DIN EN 12546-1 Berichtigung 1-2005 |
与食品接触的材料和物品.家用保温容器.第1部分:真空器皿、保温瓶和保温壶规范 |
|
| DIN EN 12546-1 Berichtigung 1-2005 |
与食品接触的材料和物品.家用保温容器.第1部分:真空器皿、保温瓶和保温壶规范 |
|
| DIN EN 12546-1-2000 |
与食品接触的材料和物品.家用保温容器.第1部分:真空器皿、保温瓶和保温壶规范 |
(Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs; German version EN 12546-1:2000) |
| DIN EN 12546-2-2000 |
与食品接触的材料和物品.家用保温容器.第2部分:保温袋和保温箱规范 |
(Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 2: Specification for insulated bags and boxes; German version EN 12546-2:2000) |
| DIN EN 12546-3-2000 |
与食品接触的材料和物品.家用保温容器.第3部分:热包装材料规范 |
(Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3: Specification for thermal packs; German version EN 12546-3:2000) |
| DIN EN 12547-1999 |
离心机.一般安全要求 |
(Centrifuges - Common safety requirements; German version EN 12547:1999) |
| DIN EN 12548-1999 |
铅及铅合金.电缆护套和套筒用铅合金锭 |
(Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves; German version EN 12548:1999) |
| DIN EN 12549-1999 |
声学.紧固件操纵工具的噪声测试规范.工程法 |
(Acoustics - Noise test code for fastener driving tools - Engineering method; German version EN 12549:1999) |
| DIN EN 1255-1995 |
内河航运船只.旋臂起重机 |
(Inland navigation vessels - Swing derricks; German version EN 1255:1995) |
| DIN EN 125500-1996 |
分规范.除干扰滤波器的铁氧体磁环芯和宽频带传输应用 |
(Sectional specification: Magnetic oxide ring cores for interference suppression and low level signal transformer applications; German version EN 125500:1996) |
| DIN EN 1256-1996 |
气焊设备.对焊接,切割及类似作业用装置上软管的规定 |
(Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes; German version EN 1256:1996) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com