标准号 |
中文名称 |
英文名称 |
DIN 15106-1982 |
起重机用吊钩.简单承载钩的安全销 |
(Lifting hooks; safety catch for simple load hook) |
DIN 15112-1979 |
拉伸弹簧.安全技术要求和检验 |
(Spring pulls; safety requirements, testing) |
DIN 15120-1976 |
系列起重设备.移动式升降台.计算原理及稳定性 |
(Serial lifting equipment - Mobile platforms for lifting persons, basic calculation criterias and stability) |
DIN 15141-2-1990 |
传送链.货板.平货板的检验方法 |
(Transportation chain; pallets; test methods for flat pallets) |
DIN 15141-4-1985 |
链式运输设.托盘.四通木制框形托盘.酿造厂托盘 |
(Transportation chain; pallets; four way timber perimeter-base pallets; 1000 mm1200 mm; brewery pallets) |
DIN 15142-1-1973 |
地面运输设备.箱式托盘.带立柱托盘.主要尺寸和堆垛装置 |
(Load boards; box pallets, post pallets, principal dimensions and stacking devices) |
DIN 15146-2-1986 |
木制四通平托盘.800mm×1200mm |
(Timber four-way flat pallets 800 mm1200 mm) |
DIN 15146-3-1986 |
木制四通平托盘.1000mm×1200mm |
(Timber four-way flat pallets; 1000 mm1200 mm) |
DIN 15146-4-1991 |
托盘.木制四向进叉平托盘.800mm×600mm |
(Pallets; timber four-way-flat pallets; 800 mm600 mm) |
DIN 15147-1985 |
木制平托盘.质量要求 |
(Timber flat pallets; quality requirements) |
DIN 15155-1986 |
托盘.具有两块活动的前壁板和网格边板的箱式托盘 |
(Pallets; box pallet with mesh side panels and 2 frontside flaps) |
DIN 15157-1985 |
木制箱式托盘.用于有核水果的收摘运输和贮藏 |
(Timber box pallet, for harvesting, transportation and storing of pomaceous fruits) |
DIN 15158-1-2005 |
包装.物料运输用托盘.第1部分:平托盘试验的性能要求和选择 |
|
DIN 15158-2-2005 |
包装.物料运输用托盘.第2部分:工作载荷 |
|
DIN 15160-2-1989 |
带驾驶座的地面运输机动车.脚踏板的结构和要求的规定 |
(Self-propelled industrial trucks; sit-down rider-controlled; rules for the construction and layout of pedals; german version EN 281:1988) |
DIN 15170-1987 |
田间运输车.牵引装置.连接尺寸.要求.检验 |
(Industrial trucks; trailer couplings; connecting dimensions, requirements, testing) |
DIN 15172-1988 |
动力地面运输工具.拖拉机及牵引的地面运输工具.拉力.牵引负载 |
(Powered industrial trucks; tractors and other trucks used for hauling trailers; traction force, trailer load) |
DIN 15185-1-1991 |
带导向工业用货车的仓库系统.对地面和货栈的要求以及其他要求 |
(Warehousesystems with guided industrial trucks; requirements on the ground, the warehouse and other requirements) |
DIN 15185-2-1993 |
带导向地面运输工具的仓库系统.窄通道上地面运输工具对人员的防护.安全技术要求.检验 |
(Warehousesystems with powered industrials trucks; code of practice for the protection of persons when operating with trucks in narrow aisles; safety requirements, testing) |
DIN 15190-101-1991 |
货运集装箱.陆运集装箱.主要尺寸.角配件.检验 |
(Freight containers; land containers; principal dimensions, corner fittings, test) |
DIN 15190-102-1991 |
货运集装箱.陆运集装箱.封闭式结构 |
(Freight containers; land containers; closed type) |
DIN 15201-2-1981 |
连续输送机.辅助设备.名称.图例 |
(Continous mechanical handling equipment; accessory equipment; terminology, symbols) |
DIN 15207-1-2000 |
连续输送机.带式输送机用托辊.散装物料带式输送机托辊的主要尺寸 |
(Continuous mechanical handling equipment - Idlers for belt conveyors - Main dimensions of idlers for belt conveyors for bulk material) |
DIN 15207-2-1988 |
连续输送机.货物输送带用支承托辊.成组货件输送带用支承托辊的主要尺寸 |
(Continuous mechanical handling equipment; idlers for belt conveyors for unit loads; main dimensions of idlers) |
DIN 15209-1984 |
连续输送机.带式输送机用支承棍用缓冲环 |
(Continous mechanical handling equipment; belt conveyors, impact rings for carrying idlers) |
DIN 1521-1959 |
焊接的钢制机械型箱 |
(Machine moulding boxes of steel, welded) |
DIN 15210-1984 |
连续输送机.带式输送机用返载皮带支承棍的支环 |
(Continous mechanical handling equipment; belt conveyors, discs for return idlers) |
DIN 1522-1959 |
机械型箱模板 |
(Pattern plates for machine moulding boxes) |
DIN 15220-1982 |
连续输送机.皮带输送机.用防护设备解决卷料部位安全的示例 |
(Continuous mechanical handling equipment - Belt conveyors, examples for the protection of nip points by guards) |
DIN 15221-1978 |
连续输送机.链式输送机.用防护设备解决卷料部位安全的示例 |
(Continuous mechanical handling equipment - Conveyors and elevators with chain-elements, examples for protection of nip points by guards) |
DIN 15222-1978 |
连续输送机.带承重装置或刮板的链式输送机.用刮板或横隔板解决防止故障的示例 |
(Continuous mechanical handling equipment - Chain conveyors with load carriers or pushers, examples for the protection against injury from pushers or shrouds) |
DIN 15223-1978 |
连续输送机.皮带输送机.解决惰轮上狭窄点部位安全的示例 |
(Continuous mechanical handling equipment - Belt conveyors, examples for the protection of nip points at idlers) |
DIN 15224-1983 |
连续输送机.螺旋输送机.解决窄点和进料位置安全的示例 |
(Continuous mechanical handling equipment - Screw conveyors, examples for the protection of shear and nip points) |
DIN 1523-1960 |
机械型箱与模板用导销 |
(Guide pins for machine moulding boxes and for pattern plates) |
DIN 15231-1980 |
连续输送机.斗式提升机.扁斗 |
(Continuous mechanical handling equipment; bucket elevators, shallow buckets) |
DIN 15232-1980 |
连续输送机.斗式提升机.扁圆斗 |
(Continuous mechanical handling equipment; bucket elevators, shallow, rounded buckets) |
DIN 15233-1980 |
连续输送机.斗式提升机.中深斗 |
(Continuous mechanical handling equipment; bucket elevators, medium deep buckets) |
DIN 15234-1980 |
连续输送机.斗式提升机.带平面后壁的深斗 |
(Continuous mechanical handling equipment; bucket elevators, deep buckets with flat rear wall) |
DIN 15235-1980 |
连续输送机.斗式提升机.带弯曲后壁的深斗 |
(Continuous mechanical handling equipment; bucket elevators, deep buckets with curved rear wall) |
DIN 15236-1-1980 |
连续输送机.斗式提升机.传送带上斗的固定 |
(Continuous mechanical handling equipment; bucket elevators, bucket attachment to belts) |
DIN 15236-4-1980 |
连续输送机.斗式提升机.圆钢链上链斗的固定 |
(Continuous mechanical handling equipment; bucket elevators, bucket attachment to round steel link chains) |
DIN 15237-1980 |
连续输送机.加固皮带构件的定位螺钉和凹垫圈 |
(Continuous mechanical handling equipment; seating screws and cupped washers for the attachment of components to belts) |
DIN 1525-1978 |
铸型设备及金属铸模.定位销 |
(Pattern equipment and gravity dies for foundries - Dowels) |
DIN 1526-1978 |
铸型设备.模型符号 |
(Pattern equipment for foundries - Signs for patterns) |
DIN 15261-1-1986 |
连续输送机.螺旋输送机.连接尺寸 |
(Continuous mechanical handling equipment for loose bulk materials; screw conveyors; mating dimensions) |
DIN 15261-2-1986 |
连续输送机.螺旋输送机.螺旋叶片 |
(Continuous mechanical handling equipment for loose bulk materials; screw conveyors; helical screw blade) |
DIN 15262-1983 |
连续输送机.松散物料用螺旋输送机.计算原则 |
(Continuous mechanical handling equipment; Screw conveyors for loose bulk materials; Design principles) |
DIN 1527-1978 |
铸型设备.型芯箱闭锁器 |
(Pattern equipment for foundries - Slip dowels for core boxes) |
DIN 1530-3-1991 |
带圆锥头的顶出机顶杆 |
(Ejector pins with conical head) |
DIN 15306-2002 |
升降机.住宅建筑用载人电梯.结构尺寸、电梯笼尺寸和门尺寸 |
(Lifts - Passenger lifts in residential buildings - Functional dimensions) |
DIN 15309-2002 |
升降机.非住宅建筑用载人电梯和床式升降机.结构尺寸、电梯笼尺寸和门尺寸 |
(Lifts - Passenger lifts in non-residential buildings and bed lifts - Functional dimensions) |
DIN 15310-1985 |
升降机.载小件货物的升降机.结构尺寸.吊笼尺寸 |
(Lifts; service lifts; well-dimensions, car-dimensions; ISO 4190/3 edition 1982 modified) |
DIN 15313-1953 |
升降机.导轨的夹板与平衡板 |
(Lifts; terminal boards, balancing sheets for guide rails) |
DIN 15315-1999 |
升降机.钢丝绳接头 |
(Lift - Cable joints) |
DIN 15325-1990 |
旅客电梯和服务电梯.控制装置.信号件和附件 |
(Lifts and service lifts; control devices, signals and additional fittings; ISO 4190-5, edition 1987 modified) |
DIN 15350-1992 |
台架货物存放和取出操作设备.钢支承结构的规范.计算 |
(Storage and retrieval machines; rules for calculations of steel structures) |
DIN 15400-1990 |
起重机用吊钩.机械性能.承载能力.应力和材料 |
(Lifting hooks; materials, mechanical properties, lifting capacity and stresses) |
DIN 15401-1-1982 |
起重机用吊钩.单钩.毛坯 |
(Lifting hooks for lifting appliances; Single hooks; Unmachined parts) |
DIN 15401-2-1983 |
起重机用吊钩.单钩.带螺纹轴的制品 |
(Lifting hooks for lifting appliances; Single hooks; Finished parts with threaded shank) |
DIN 15402-1-1982 |
起重机用吊钩.双钩.毛坯 |
(Lifting hooks for lifting appliances; Ramshorn hooks; Unmaschined parts) |
DIN 15402-2-1983 |
起重机用吊钩.双钩.带螺纹轴的制品 |
(Lifting hooks for lifting appliances; Ramshorn hooks; Finished parts with threaded shank) |
DIN 15403-1969 |
起重机用吊钩.圆螺纹 |
(Lifting Hooks for Hoists; Knuckle Threads) |
DIN 15404-1-1989 |
起重机用吊钩.锻制吊钩的交货技术条件 |
(Lifting hooks; technical delivery conditions for forged hooks) |
DIN 15404-2-1988 |
起重机用吊钩.片式钩交货技术条件 |
(Lifting hooks; technical delivery conditions for laminated hooks) |
DIN 15405-1-1979 |
起重机用吊钩.锻制吊钩使用中的检查 |
(Lifting hooks; inspection of forged hooks in service) |
DIN 15405-2-1988 |
起重机用吊钩.片式钩使用中的检查 |
(Lifting hooks; In-service inspection of laminated hooks) |
DIN 15406-1969 |
起重机用吊钩.自由锻制吊钩的裂纹 |
(Lifting hooks; tracing of hand forged hooks, directives) |
DIN 15407-1-1977 |
起重机用吊钩.用于铁水包及钢水包的叠片铆合式单钩.装配.主要尺寸 |
(Lifting hooks; laminated hooks with a point for spigot ladles, assembly, principal dimensions) |
DIN 15407-2-1989 |
起重机用吊钩.用于铁水包及钢水包的叠片铆合式单钩.零件 |
(Laminated point hooks for spigot ladles; components) |
DIN 15408-1982 |
起重机.双绳轮的下轮.总成 |
(Cranes; twin sheave bottom blocks; assembly) |
DIN 15409-1982 |
起重机.四绳轮的上轮.总成 |
(Cranes; quadruple sheave bottom blocks; assembly) |
DIN 15410-1982 |
系列起重装置.电动起重机的下滑轮.单辊和双辊.安装 |
(Serial lifting appliances; single and twin sheave bottom blocks for electric hoists; assembly) |
DIN 15411-1983 |
起重机.下滑轮用起重吊钩的吊挂装置 |
(Lifting appliances; lifting hook suspensions for bottom blocks) |
DIN 15412-1-1983 |
起重机的下滑轮.挺杆.毛坯 |
(Bottom blocks for lifting appliances; cross pieces; unmachined parts) |
DIN 15412-2-1983 |
起重机的下滑轮.挺杆.成品 |
(Bottom blocks for lifting appliances; cross pieces; finished parts) |
DIN 15413-1983 |
起重机的下滑轮.起重吊钩螺母 |
(Bottom blocks for lifting appliances; lifting hook nuts) |
DIN 15414-1983 |
起重机的下滑轮.安全板 |
(Bottom blocks for lifting appliances; securing plates) |
DIN 15417-1982 |
起重机的下绳轮;带滑动轴承的D型绳轮 |
(Cranes; bottom blocks; type D rope pulleys with plain bearings) |
DIN 15418-1-1982 |
起重机的下绳轮.无内轴套深滚道滚珠轴承的C型绳轮 |
(Cranes; bottom blocks; type C rope pulleys with deep groove ball bearing, without internal sleeve) |
DIN 15418-2-1982 |
起重机的下绳轮.无内轴套深滚道滚珠轴承的C型绳轮的间隔轴套 |
(Cranes; bottom blocks; spacer sleeves for type C rope pulleys with deep groove ball bearing, without internal sleeve) |
DIN 15418-3-1982 |
起重机的下滑轮.无内轴套深滚道滚珠轴承的C型绳轮的油封盖 |
(Cranes; bottom blocks; sealing covers for type C rope pulleys with deep groove ball bearing, without internal sleeve) |
DIN 15421-1-1982 |
起重机的下滑轮.带深滚道滚珠轴承和内轴套的B型绳轮 |
(Cranes; bottom blocks; type B rope pulleys with deep groove ball bearing and internal sleeve) |
DIN 15421-2-1982 |
起重机的下滑轮.带深滚道滚珠轴承和内轴套的B型绳轮的内轴套和隔离轴套 |
(Cranes; bottom blocks; internal sleeves and spacer sleeves for type B rope pulleys with deep groove ball bearing and internal sleeve) |
DIN 15421-3-1982 |
起重机的下滑轮.带深滚道滚珠轴承和内轴套的B型绳轮的油封盖 |
(Cranes; bottom blocks; sealing covers for type B rope pulleys with deep groove ball bearing and internal sleeve) |
DIN 15422-1-1982 |
起重机的下滑轮.带滚柱轴承和内轴套的A型绳轮 |
(Cranes; bottom blocks; type A rope pulleys with cylindrical rolling bearing and internal sleeve) |
DIN 15422-2-1982 |
起重机的下滑轮.带滚柱轴承和内轴套的A型绳轮的内轴套和隔离轴套 |
(Cranes; bottom blocks; internal sleeves and spacer sleeves for type A rope pulleys with cylindrical rolling bearing and internal sleeve) |
DIN 15422-3-1982 |
起重机的下滑轮.带滚柱轴承和内轴套的A型绳轮的油封盖 |
(Cranes; bottom blocks; sealing covers for type A rope pulleys with cylindrical rolling bearing and internal sleeve) |
DIN 15428-1978 |
起重机.负载悬吊装置.交货技术条件 |
(Lifting appliances; load suspending devices, technical specifications) |
DIN 15429-1978 |
起重机.负载悬吊装置.使用中的检查 |
(Lifting appliances; load suspending devices, inspection in service) |
DIN 15430-1989 |
传动技术.电动液压的升降设备.尺寸和要求 |
(Power transmission engineering; electrohydraulic lifting appliances; dimensions and technical requirements) |
DIN 15431-1980 |
传动技术.制动鼓.主要尺寸 |
(Power transmission engineering; brake drums, main dimensions) |
DIN 15432-1989 |
传动技术.制动盘.主要尺寸 |
(Power transmission engineering; brake discs; main dimensions) |
DIN 15433-2-1992 |
传动技术.盘式制动器.制动片 |
(Power transmission engineering; disc brakes, brake linings) |
DIN 15434-1-1989 |
传动技术.滚筒式和盘式制动器.计算原理 |
(Power transmission engineering; principles for drum- and discbrakes, calculation) |
DIN 15434-2-1989 |
传动技术.滚筒式和盘式制动器.使用中检查 |
(Power transmission engineering; principles for drum- and discbrakes; maintenance in service) |
DIN 15435-1-1992 |
动力传动技术.鼓式制动器.尺寸和要求 |
(Power transmission engineering; drum brakes; connecting dimensions) |
DIN 15435-2-1992 |
动力传动技术.鼓式制动器.制动瓦 |
(Power transmission engineering; drum brakes; brake shoes) |
DIN 15435-3-1992 |
动力传动技术.鼓式制动器.制动片 |
(Power transmission engineering; drum brakes; brake linings) |
DIN 15436-1989 |
动力传动工程.鼓式和圆盘制动器.闸瓦的技术要求 |
(Power transmission engineering; drum- and discbrakes; technical requirements for brake linings) |
DIN 15437-1989 |
传动技术.滚筒式和盘式制动器.交货技术要求 |
(Power transmission engineering; brake drums and brake discs; technical terms of delivery) |
DIN 15450-1978 |
起重机.行走机构驱动万向接头的计算 |
(Cranes; evaluating of cardan shafts for travelling drives) |
DIN 15451-1-1978 |
起重机.万向节轴.连接尺寸 |
(Cranes; cardan shafts, principle dimensions) |
DIN 15451-2-1978 |
起重机.万向节轴.法兰连接 |
(Cranes; cardan shafts, connection to coupling flange) |
DIN 15452-1978 |
起重机.万向节轴的连接法兰盘 |
(Cranes; coupling flanges for cardan shafts) |
DIN 15453-1978 |
起重机.万向节轴.安装.保养.运输和贮存的守则 |
(Cranes; cardan shafts, directives for installation, maintainance, handling and storage) |
DIN 1546-1954 |
黑色和有色金属线材用金钢石拉模 |
(Diamond dies for wires of ferrous and non-ferrous metals) |
DIN 15460-1979 |
建筑材料用的起重机吊篮.安全要求 |
(Load box for building materials; safety requirements) |
DIN 1547-1-1969 |
硬质合金拉模和环形拉模.概念.标记.特征标注 |
(Wire, bar and tube drawing dies; terminology, designation, marking) |
DIN 1547-10-1969 |
硬质合金拉模和环形拉模.六方钢材的环形拉模 |
(Hexagon bar drawing dies for steel) |
DIN 1547-11-1969 |
硬质合金拉模和环形拉模.有色金属六方棒材的环形拉模 |
(Hexagon bar drawing dies for non-ferrous metal) |
DIN 1547-2-1969 |
硬质合金拉模和环形拉模.钢丝拉模 |
(Wire drawing dies for steel) |
DIN 1547-3-1969 |
硬质合金拉模和环形拉模.有色金属线材拉模 |
(Wire drawing dies for non-ferrous metal) |
DIN 1547-4-1969 |
硬质合金拉模和环形拉模.圆钢环形拉模 |
(Bar drawing dies for steel) |
DIN 1547-5-1969 |
硬质合金拉模和环形拉模.有色金属圆棒的环形拉模 |
(Bar drawing dies for non-ferrous metal) |
DIN 1547-6-1969 |
硬质合金拉模和环形拉模.钢管环形拉模 |
(Tube drawing dies for steel) |
DIN 1547-7-1969 |
硬质合金拉模和环形拉模.有色金属管材的环形拉模 |
(Tube drawing dies for non-ferrous metal) |
DIN 1547-8-1969 |
硬质合金拉模和环形拉模.方钢及扁钢的环形拉模 |
(Shaped drawing dies for steel of square and flat section) |
DIN 1547-9-1969 |
硬质合金拉模和环形拉模.有色金属方材及扁材的环形拉模 |
(Shaped drawing dies for non-ferrous metal of square and flat section) |
DIN 15502-1-1989 |
由照相孔径产生的图象面积和和投影图象面积正面比为1.37:1的35mm胶片 |
(Film 35 mm; image area produced by camera aperture and projectable image area; aspect ratio 1,37 : 1) |
DIN 15502-2-1996 |
35mm胶片.图象尺寸.第2部分:电视用显象.图象长宽比为1.33:1 |
(Film 35 mm - Part 2: Projected image area for television; aspect ratio 1,33:1) |