标准号 |
中文名称 |
英文名称 |
DIN EN ISO 14880-1-2005 |
显微透镜系列.第1部分:词汇 |
|
DIN EN ISO 14880-1-2005 |
显微透镜系列.第1部分:词汇 |
|
DIN EN ISO 14881-2005 |
集成光学.接口.耦合特性相关参数 |
|
DIN EN ISO 14881-2005 |
集成光学.接口.耦合特性相关参数 |
|
DIN EN ISO 14889-1997 |
眼科光学.眼镜镜片.未切精加工眼镜片的基本要求 |
(Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished spectacle lenses (ISO 14889:1997); German version EN ISO 14889:1997) |
DIN EN ISO 14890-2005 |
输送带.通用织物结构的橡胶或塑料包覆的输送带规范 |
|
DIN EN ISO 14891-2002 |
乳和乳制品.氮含量测定.依据Dumas原理燃烧的常规方法 |
(Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle (ISO 14891:2002); German version EN ISO 14891:2002) |
DIN EN ISO 14895-2003 |
小型船舶.船上厨房用液体燃料炉 |
(Small craft - Liquid-fueled galley stoves (ISO 14895:2000); German version EN ISO 14895:2003) |
DIN EN ISO 14896-2002 |
塑料.聚氨酯原材料.异氰酸酯的含量测定 |
(Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2000); German version EN ISO 14896:2001) |
DIN EN ISO 14902-2002 |
动物饲料.大豆制品胰蛋白酶抑制剂活性的测定 |
(Animal feeding stuffs - Determination of trypsin inhibitor activity of soya products (ISO 14902:2001); German version EN ISO 14902:2001) |
DIN EN ISO 14906-2005 |
道路运输和交通远程信息管理.电子收费.专用短程通信的应用接口定义 |
|
DIN EN ISO 14911-1999 |
水质.用离子色谱法测定溶解的锂离子、钠离子、铵离子、钾离子、锰离子、镁离子、锶离子和钡离子含量--用于 |
(Water quality - Determination of dissolved Li, Na, NH, K, Mn, Ca, Mg, Sr and Ba using ion chromatography - Method for water and waste water (ISO 14911:1998); German version EN ISO 14911:1999) |
DIN EN ISO 14915-1-2003 |
多媒体用户接口的软件人类工效学.第1部分:设计原理和框架 |
(Software ergonomics for multimedia user interfaces - Part 1: Design principles and framework (ISO 14915-1:2002); German version EN ISO 14915-1:2002) |
DIN EN ISO 14915-3-2003 |
多媒体用户接口的软件人类工效学.第3部分:媒体选择和组合 |
(Software ergonomics for multimedia user interfaces - Part 3: Media selection and combination (ISO 14915-3:2002); German version EN ISO 14915-3:2003) |
DIN EN ISO 14918-1999 |
热喷涂.热喷涂的验收试验 |
(Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998); German version EN ISO 14918:1998) |
DIN EN ISO 14919-2001 |
热喷镀.熔喷法和电弧喷镀用线材、杆材和软线.分类.技术支持条件 |
(Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification; Technical supply conditions (ISO 14919:2001); German version EN ISO 14919:2001) |
DIN EN ISO 14920-1999 |
热喷涂.自流合金的喷涂和熔化 |
(Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:1999); German version EN ISO 14920:1999) |
DIN EN ISO 14921-2001 |
热喷涂.工程件用热喷镀涂层的应用程序 |
(Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2001); German version EN ISO 14921:2001) |
DIN EN ISO 14922-1-1999 |
热喷镀.热喷镀结构的质量要求.第1部分:选择和使用导则 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999); German version EN ISO 14922-1:1999) |
DIN EN ISO 14922-2-1999 |
热喷镀.热喷镀结构的质量要求.第2部分:综合质量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999); German version EN ISO 14922-2:1999) |
DIN EN ISO 14922-3-1999 |
热喷镀.热喷镀结构的质量要求.第3部分:标准质量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999); German version EN ISO 14922-3:1999) |
DIN EN ISO 14922-4-1999 |
热喷镀.热喷镀结构的质量要求.第4部分:基本质量要求 |
(Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999); German version EN ISO 14922-4:1999) |
DIN EN ISO 14924-2005 |
热喷涂.热喷涂覆层的后续处理和精整 |
|
DIN EN ISO 14935-1998 |
石油及其相关产品.耐火液体中吸油绳持续燃烧时间的测定 |
(Petroleum and related products - Determination of wickflame persistence of fire-resistant fluids (ISO 14935:1998); German version EN ISO 14935:1998) |
DIN EN ISO 14937 Berichtigung 1-2005 |
医疗保健产品灭菌.医疗器械用消毒剂的特性和消毒方法的开发、验证和常规控制的一般要求.DIN EN ISO 14937-2001的勘误 |
|
DIN EN ISO 14937-2001 |
保健产品的消毒.医疗设备消毒方法的制定、确认和常规控制及消毒剂特性的通用标准 |
(Sterilization of health care products - General criteria for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2000); German version EN ISO 14937:2000) |
DIN EN ISO 14939-2001 |
动物饲料.卡巴氧含量的测定.高效液相色谱法 |
(Animal feeding stuffs - Determination of carbadox content - Method using high-performance liquid chromatography (ISO 14939:2001); German version EN ISO 14939:2001) |
DIN EN ISO 14945-2004 |
小艇.建造者铭牌 |
|
DIN EN ISO 14946-2001 |
小型船舶.最大荷载能力 |
(Small craft - Maximum load capacity (ISO 14946:2001); German version EN ISO 14946:2001) |
DIN EN ISO 14956-2003 |
空气质量.与规定的测量不确定度的比较来评价测量规程的适用性 |
(Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002); German version EN ISO 14956:2002) |
DIN EN ISO 14971-2001 |
医疗装置.医疗装置风险管理应用 |
(Medical devices - Application of risk management to medical devices (ISO 14971:2000); German version EN ISO 14971:2000) |
DIN EN ISO 14982-1998 |
农林机械.电磁兼容性.检验方法和验收评定标准 |
(Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998); German version EN ISO 14982:1998) |
DIN EN ISO 15001-2004 |
麻醉和呼吸设备.与氧气的兼容性 |
|
DIN EN ISO 15004-1998 |
眼科仪器.基本要求和试验方法 |
(Ophthalmic instruments - Fundamental requirements and test methods (ISO 15004:1997); German version EN ISO 15004:1997) |
DIN EN ISO 15011-1-2002 |
焊接和连接规程中的健康和安全.由弧焊产生的焊接烟尘和气体用的实验室方法.第1部分:发射率的测定和特殊焊接 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1: Determination of emission rate and sampling for analysis of particulate fume (ISO 15011-1:2002); German version EN ISO 15 |
DIN EN ISO 15011-2-2003 |
焊接和相关工艺中的保健和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:除臭氧外气体的排放率的 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2: Determination of emission rates of gases, except ozone (ISO 15011-2:2003); German version EN ISO 15011-2:2003) |
DIN EN ISO 15011-3-2003 |
焊接和相关工艺的健康和安全.电弧焊产生的烟和气体取样的实验室法.第3部分:用固定点法测定臭氧浓度 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3: Determination of ozone concentration using fixed point measurements (ISO 15011-3:2002); German version EN ISO 15011-3:200 |
DIN EN ISO 15013-1999 |
聚丙烯挤压片材(PP).要求和试验方法 |
(Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:1998); German version EN ISO 15013:1998) |
DIN EN ISO 15025-2003 |
防护服.防热和防火.限制火焰扩散的试验方法 |
(Protective clothing - Protection against heat and flame - Method of test for limited flame spread (ISO 15025:2000); German version EN ISO 15025:2002) |
DIN EN ISO 15027-1-2002 |
浸水服装.第1部分:日常工作服.要求和安全性 |
(Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2002); German version EN ISO 15027-1:2002) |
DIN EN ISO 15027-2-2002 |
浸水服装.第2部分:废弃服装.要求和安全性 |
(Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2002); German version EN ISO 15027-2:2002) |
DIN EN ISO 15027-3-2002 |
浸水服装.第3部分:试验方法 |
(Immersion suits - Part 3: Test methods (ISO 15027-3:2002); German version EN ISO 15027-3:2002) |
DIN EN ISO 15029-1-2002 |
石油和相关产品.耐火液体喷射点燃特性的测定.第1部分:喷射火焰持久性.空心喷射器法 |
(Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistance; Hollow-cone nozzle method (ISO 15029-1:1999); German version EN ISO 15029-1:1999) |
DIN EN ISO 15061-2001 |
水质.不溶溴酸盐含量的测定.离子液相色谱法 |
(Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001); German version EN ISO 15061:2001) |
DIN EN ISO 15065-2005 |
头部外形合乎ISO 7721标准的沉头螺钉的埋头孔 |
|
DIN EN ISO 15065-2005 |
头部外形合乎ISO 7721标准的沉头螺钉的埋头孔 |
|
DIN EN ISO 15083-2003 |
小艇.舱底泵吸系统 |
(Small craft - Bilge pumping systems (ISO 15083:2003); German version EN ISO 15083:2003) |
DIN EN ISO 15084-2003 |
小艇.投锚、停泊和牵引.靠船墩 |
(Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003); German version EN ISO 15084:2003) |
DIN EN ISO 15087-1-2002 |
牙科起子.第1部分:一般要求(ISO15087-1:1999) |
(Dental elevators - Part 1: General requirements (ISO 15087-1:1999); German version EN ISO 15087-1:2001) |
DIN EN ISO 15087-2-2000 |
牙科起子.第2部分:沃里克吉姆斯起子 |
(Dental elevators - Part 2: Warwick James elevators (ISO 15087-2:2000); German version EN ISO 15087-2:2000) |
DIN EN ISO 15087-3-2000 |
牙科起子.第3部分:Cryer起子 |
(Dental elevators - Part 3: Cryer elevators (ISO 15087-3:2000); German version EN ISO 15087-3:2000) |
DIN EN ISO 15087-4-2000 |
牙科起子.第4部分:Coupland起子 |
(Dental elevators - Part 4: Coupland elevators (ISO 15087-4:2000); German version EN ISO 15087-4:2000) |
DIN EN ISO 15087-5-2000 |
牙科起子.第5部分:Bein起子 |
(Dental elevators - Part 5: Bein elevators (ISO 15087-5:2000); German version EN ISO 15087-5:2000) |
DIN EN ISO 15087-6-2000 |
牙科起子.第6部分:Flohr起子 |
(Dental elevators - Part 6: Flohr elevators (ISO 15087-6:2000); German version EN ISO 15087-6:2000) |
DIN EN ISO 15098-1-2001 |
牙科镊子.第1部分:一般要求 |
(Dental tweezers - Part 1: General requirements (ISO 15098-1:1999); German version EN ISO 15098-1:2001) |
DIN EN ISO 15098-2-2000 |
牙科镊子.第2部分:Meriam型 |
(Dental tweezers - Part 2: Meriam types (ISO 15098-2:2000); German version EN ISO 15098-2:2000) |
DIN EN ISO 15098-3-2000 |
牙科镊子.第3部分:学院型 |
(Dental tweezers - Part 3: College types (ISO 15098-3:2000); German version EN ISO 15098-3:2000) |
DIN EN ISO 15103-1-2004 |
塑料.聚苯撑醚模塑和挤压材料.第1部分:名称与符号系统和基本规范 |
|
DIN EN ISO 15103-2-2004 |
塑料.聚苯撑醚模塑和挤压材料.第2部分:试验样品的制备和性能测定 |
|
DIN EN ISO 15106-1-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.第1部分:湿度探测传感器法 |
|
DIN EN ISO 15106-1-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.第1部分:湿度探测传感器法 |
|
DIN EN ISO 15106-2-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.第2部分:红外探测传感器法 |
|
DIN EN ISO 15106-2-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.第2部分:红外探测传感器法 |
|
DIN EN ISO 15106-3-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.第3部分:电解探测传感器法 |
|
DIN EN ISO 15106-3-2005 |
塑料.薄膜和薄片.水蒸气传输率的测定.第3部分:电解探测传感器法 |
|
DIN EN ISO 15119-2004 |
包装.袋.添装袋的摩擦测定 |
|
DIN EN ISO 1513-1994 |
色漆和清漆.试验样品的检验和制备 |
(Paints and varnishes - Examination and preparation of samples for testing (ISO 1513:1992); German version EN ISO 1513:1994) |
DIN EN ISO 15136-1-2002 |
石油和天然气工业的钻孔设备.人工升降梯的空腔泵系统.第1部分:泵 |
(Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2001); German version EN ISO 15136-1:2001) |
DIN EN ISO 15138-2003 |
石油和天然气工业.海上生产设备.加热、通风和空调设备 |
(Petroleum and natural gas industries - Offshore production installation - Heating, ventilation and air-conditioning (ISO 15138:2000 plus Technical Corrigendum 1:2001); German and English version EN ISO 15138:2000 + AC:2002) |
DIN EN ISO 1514-1997 |
漆和涂层材料.标准试样板 |
(Paints and varnishes - Standard panels for testing (ISO 1514:1993); German version EN ISO 1514:1997) |
DIN EN ISO 1514-2005 |
色漆和清漆.试验用标准板 |
|
DIN EN ISO 15141-1-1998 |
食品.谷类作物和谷类作物产品中赭曲霉素A的测定.第1部分:硅胶净化高效液体色谱法 |
(Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 1: High performance liquid chromatographic method with silica gel clean up (ISO 15141-1:1998); German version EN ISO 15141-1:1998) |
DIN EN ISO 15141-2-1998 |
食品.谷类作物和谷类作物产品中赭曲霉素A的测定.第2部分:重碳酸盐净化高效液体色谱法 |
(Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 2: High performance liquid chromatographic method with bicarbonate clean up (ISO 15141-2:1998); German version EN ISO 15141-2:1998) |
DIN EN ISO 15147-1999 |
轻型运输机皮带.轻型运输机皮带交叉宽度和长度的公差 |
(Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:1999); German version EN ISO 15147:1999) |
DIN EN ISO 15148-2003 |
建筑材料和产品的水热吸收性.用颗粒浸湿法测定水吸收系数 |
(Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion (ISO 15148:2002); German version EN ISO 15148:2002) |
DIN EN ISO 15156-1-2003 |
石油和天然气工业.在石油和天然气生产中用于含H2S环境的材料.第1部分:耐裂材料选择的一般原则 |
(Petroleum and natural gas industries - Material for use in HS-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001); German and English version EN ISO 15156-1:2001) |
DIN EN ISO 15156-2-2005 |
石油、石油化学和天然气工业.油和气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸铁的使用 |
|
DIN EN ISO 15156-2-2005 |
石油、石油化学和天然气工业.油和气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸铁的使用 |
|
DIN EN ISO 15156-3-2005 |
石油、石油化学和天然气工业.油和气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他合金 |
|
DIN EN ISO 15156-3-2005 |
石油、石油化学和天然气工业.油和气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他合金 |
|
DIN EN ISO 1516-2002 |
闪点/无闪点测定.闭杯平衡法 |
(Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002); German version EN ISO 1516:2002) |
DIN EN ISO 1517-1995 |
色漆和清漆.表面干燥试验.微球体法 |
(Paints and varnishes - Surface-drying test - Ballotini method (ISO 1517:1973); German version EN ISO 1517:1995) |
DIN EN ISO 1518-2000 |
涂料和清漆.刮痕试验 |
(Paints and varnishes - Scratch test (ISO 1518:1992); German version EN ISO 1518:2000) |
DIN EN ISO 15181-1-2004 |
涂料和清漆.防虫漆的杀虫剂释放率测定.第1部分:杀虫剂萃取的一般方法 |
|
DIN EN ISO 15181-2-2004 |
色漆和清漆.从防虫漆释放杀虫剂速率的测定.第2部分:萃取物中铜离子浓度的测定和释放速率的计算 |
|
DIN EN ISO 15187-2003 |
操纵工业机器人.机器人程序设计和操纵的图形使用者接口 |
(Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R) (ISO 15187:2000); German version EN ISO 15187:2002) |
DIN EN ISO 1519-1995 |
色漆和清漆.弯曲试验(圆心轴) |
(Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:1973); German version EN ISO 1519:1995) |
DIN EN ISO 15195-2004 |
实验室医学.参考测量实验室要求 |
(Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003); German version EN ISO 15195:2003) |
DIN EN ISO 15195-2004 |
实验室医学.参考测量实验室要求 |
|
DIN EN ISO 15197 Berichtigung 1-2005 |
体外诊断试验系统.糖尿病症管理中自测用血糖监测系统的要求.DIN EN ISO 15197-2004的勘误 |
|
DIN EN ISO 15197-2004 |
体外诊断试验系统.糖尿病症处理中自测试用血液葡萄糖监测系统的要求 |
|
DIN EN ISO 1520-2002 |
涂料和清漆.杯突试验 |
(Paints and varnishes - Cupping test (ISO 1520:1999); German version EN ISO 1520:2001) |
DIN EN ISO 15212-1-1999 |
摆动式密度计.第1部分:实验室仪器 |
(Oscillation-type density meters - Part 1: Laboratory instruments (ISO 15212-1:1998); German version EN ISO 15212-1:1999) |
DIN EN ISO 15212-2-2002 |
摆动式密度计.第2部分:同质液体测量仪器 |
(Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002); German version EN ISO 15212-2:2002) |
DIN EN ISO 1522-2000 |
涂料和清漆.摆杆阻尼试验 |
(Paints and varnishes - Pendulum damping test (ISO 1522:1998); German version EN ISO 1522:2000) |
DIN EN ISO 15225-2000 |
命名.数据交换管理用医疗设备的命名系统规范 |
(Nomenclature - Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange (ISO 15225:2000); German version EN ISO 15225:2000) |
DIN EN ISO 15225-2005 |
命名.用于管理资料交流的医疗器械命名系统规范 |
|
DIN EN ISO 1523-2002 |
闪点测定.闭杯平衡法 |
(Determination of flash point - Closed cup equilibrium method (ISO 1523:2002); German version EN ISO 1523:2002) |
DIN EN ISO 15236-2-2004 |
衬钢丝绳芯传送带.第2部分:选用带类型 |
|
DIN EN ISO 15236-4-2004 |
衬钢丝绳芯传送带.第4部分:硬化带接头 |
|
DIN EN ISO 1524-2002 |
涂料、清漆和印刷油墨.研磨细度测定 |
(Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2000); German version EN ISO 1524:2002) |
DIN EN ISO 15245-1-2003 |
储气瓶.连接气瓶阀的平行螺纹.第1部分:规范 |
(Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 15245-1:2001); German version EN ISO 15245-1:2001) |
DIN EN ISO 15245-2-2002 |
储气瓶.连接储气瓶阀门的平行螺纹.第2部分:量规检验 |
(Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001) |
DIN EN ISO 15252-1-2000 |
塑料.环氧树脂粉末模塑化合物(EP-PMCs).第1部分:名称与符号系统和基础规范 |
(Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 1: Designation system and basis for specifications (ISO 15252-1:1999); German version EN ISO 15252-1:1999) |
DIN EN ISO 15252-2-2000 |
塑料.环氧树脂粉末模塑化合物(EP-PMCs).第2部分:试样的准备和特性的测定 |
(Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999); German version EN ISO 15252-2:1999) |
DIN EN ISO 15252-3-2000 |
塑料.环氧树脂粉末模塑化合物(EP-PMCs).第3部分:对所选模塑化合物的要求 |
(Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 15252-3:1999); German version EN ISO 15252-3:1999) |
DIN EN ISO 15253-2001 |
眼科光学和设备.增强弱视的光学装置 |
(Ophthalmic optics and instruments - Optical devices for enhancing low-vision (ISO 15253:2000); German version EN ISO 15253:2000) |
DIN EN ISO 15254-2003 |
眼科光学和仪器.提高视力用电子光学器件 |
(Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision (ISO 15254:2002); German version EN ISO 15254:2002) |
DIN EN ISO 15265-2004 |
热环境的人类工效学.热工作环境中防止压力和不适的风险评估策略 |
|
DIN EN ISO 1530-2003 |
渔网.编织网的名称与符号和说明 |
(Fishing nets - Description and designation of knotted netting (ISO 1530:2003); German version EN ISO 1530:2003) |
DIN EN ISO 15301-2002 |
动植物脂肪和油.粗脂肪和原油中沉积物的测定.离心法 |
(Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001); German version EN ISO 15301:2001) |
DIN EN ISO 15304-2002 |
动植物脂肪和油.植物脂肪和油的过脂肪酸异构体含量测定.气相色谱法 |
(Animal and vegetable fats and oils - Determination of the content of trans fatty acid isomers of vegetable fats and oils - Gas chromatographic method (ISO 15304:2002); German version EN ISO 15304:2002) |
DIN EN ISO 15310-2005 |
纤维增强塑料复合材料.用板捻法测定内剪模量 |
|
DIN EN ISO 15318-1999 |
纸浆、纸和纸板.7个指定的多氯联苯的测定 |
(Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB) (ISO 15318:1999); German version EN ISO 15318:1999) |
DIN EN ISO 15320-2004 |
纸浆、纸张和纸板.水提出物中五氯苯酚的测定 |
|
DIN EN ISO 15330-2000 |
紧固件.氢脆性检测的预荷载试验.平行承载表面法 |
(Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999) |
DIN EN ISO 15364-2002 |
船舶和航海技术.载油舱用压力/真空阀 |
(Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000); German version EN ISO 15364:2001) |
DIN EN ISO 15367-1-2004 |
激光和激光相关设备.激光束波阵面形状的测试方法.第1部分:术语和基础领域 |
(Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003); German version EN ISO 15367-1:2003) |
DIN EN ISO 15367-1-2004 |
激光和激光相关设备.激光束波阵面形状的测试方法.第1部分:术语和基础领域 |
|
DIN EN ISO 15367-2-2005 |
激光及激光相关设备.激光束波前形状测定用试验方法.第2部分:Shack-Hartmann传感器 |
|