标准号 |
中文名称 |
英文名称 |
DIN EN 13963-2005 |
石膏抹灰板用填缝材料.定义、要求和试验方法 |
|
DIN EN 13964-2004 |
吊顶.要求和试验方法 |
|
DIN EN 13969-2005 |
防水用柔性薄板.包括沥青底层制箱用薄板的沥青防潮薄板.定义和特性 |
|
DIN EN 1397-1999 |
热交换器.水-空气-通风机对流器.功率确定用检验方法 |
(Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance; German version EN 1397:1999) |
DIN EN 13970-2005 |
防水用柔性薄板.沥青水蒸气控制层.定义和特性 |
|
DIN EN 13971-2003 |
碳酸盐石灰材料.活性的测定.盐酸电势滴定法 |
(Carbonate liming materials - Determination of the reactivity - Potentiometric titration method with hydrochloric acid; German version EN 13971:2002) |
DIN EN 13972-2003 |
硬质塑料容器.标称容量、满装容量和总容量的定义以及满装和总容量的测定 |
(Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity; German version EN 13972:2002) |
DIN EN 13973-2003 |
硬质塑料容器.排水能力测定方法 |
(Rigid plastics containers - Method for determination of drainability; German version EN 13973:2002) |
DIN EN 13974-2003 |
硬质塑料容器.尺寸、重量和容积公差规范 |
(Rigid plastics containers - Specification of tolerance for dimensions, weight and volume; German version EN 13974:2002) |
DIN EN 13976-1-2004 |
营救设备.婴儿保温箱的运输.第1部分:接口条件 |
|
DIN EN 13976-2-2004 |
营救设备.婴儿保温箱的运输.第2部分:系统要求 |
|
DIN EN 13979-1-2004 |
铁路设施.轮副和行车机构.整体式车轮.技术验收程序.第1部分:锻造和轧制轮 |
|
DIN EN 1398-1997 |
装卸桥 |
(Dock levellers; German version EN 1398:1997) |
DIN EN 13980-2003 |
潜在爆炸性环境.质量体系的应用 |
(Potentially explosive atmospheres - Application of quality systems; German version EN 13980:2002) |
DIN EN 13981-2-2004 |
铝及铝合金.结构性铁路设施用制品的检验和交换用技术条件.第2部分:板和薄板 |
|
DIN EN 13984-2005 |
防水用柔性薄板.塑料和橡胶蒸气控制层.定义和特性 |
|
DIN EN 13985-2003 |
机床.安全.闸刀式剪切机 |
(Machine tools - Safety - Guillotine shears; German version EN 13985:2003) |
DIN EN 13986-2002 |
建筑用人造木板.特性,合格评定和作标记 |
(Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking; German version EN 13986:2002) |
DIN EN 1399-1998 |
弹性地面铺面.抗香烟的挤压和燃烧性的测定 |
(Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes; German version EN 1399:1997) |
DIN EN 13990-2004 |
木地板.实心软木地板 |
|
DIN EN 13996-2003 |
表面活性剂.发泡能力和防沫能力.汽轮搅拌法 |
(Surface active agents - Foaming power and antifoaming power - Turbine stirring method; German version EN 13996:2002) |
DIN EN 13997-2004 |
灌溉技术.灌溉系统中使用的连接和控制附件.技术特性和检验 |
(Irrigation techniques - Connection and control accessories for use in irrigation systems - Technical characteristics and testing; German version EN 13997:2003) |
DIN EN 13997-2004 |
灌溉技术.灌溉系统中使用的连接和控制附件.技术特性和检验 |
|
DIN EN 14-1994 |
毛毯的尺寸 |
(Dimensions of bed blankets; German version EN 14:1994) |
DIN EN 140-1998 |
呼吸防护装置.半面罩和四分之一面罩.要求,试验,标记 |
(Respiratory protective devices - Half masks and quarter-masks - Requirements, testing, marking; German version EN 140:1998) |
DIN EN 1400-1-2002 |
儿童使用的和保健物品.婴儿和幼童用安抚物品.第1部分:一般安全要求和产品信息 |
(Child use and care articles - Soothers for babies and young children - Part 1: General safety requirements and product information; German version EN 1400-1:2002) |
DIN EN 1400-2-2002 |
儿童使用的和保健物品.婴儿和幼童用安抚物品.第2部分:机械要求和试验 |
(Child use and care articles - Soothers for babies and young children - Part 2: Mechanical requirements and tests; German version EN 1400-2:2002) |
DIN EN 1400-3-2002 |
婴幼儿用品.婴幼儿用橡皮奶头.第3部分:化学要求和试验 |
(Child use and care articles - Soothers for babies and young children - Part 3: Chemical requirements and tests; German version EN 1400-3:2002) |
DIN EN 1401-1-1998 |
地下无压雨水和污水管道用塑料管系统.未增塑聚氯乙烯(PVC-V).第1部分:管、配件和系统规范 |
(Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specification for pipes, fittings and the system; German version EN 1401-1:1998) |
DIN EN 14010-2004 |
机械安全.汽车用动力驱动制动设备.设计、制造、安装和交付使用阶段的安全和电磁兼容性要求 |
|
DIN EN 140100-2002 |
分规范.低负荷非绕绕固定电阻 |
(Sectional specification: Fixed low power non-wire wound resistors; German version EN 140100:1996 + A1:2001) |
DIN EN 140101-1997 |
空白详细规范.低负荷非绕组线固定电阻(评定等级S) |
(Blank detail specification: Fixed low power non-wire wound resistors (Assessment level S); German version EN 140101:1996) |
DIN EN 140102-1996 |
空白详细规范:小容许负荷非绕线固定电组.评定等级M |
(Blank detail specification: Fixed low power non-wirewound resistors - Assessment level M; German version EN 140102:1996) |
DIN EN 140103-1996 |
空白详细规范:小容许负荷非绕线固定电组.评定等级P |
(Blank detail specification: Fixed low power non-wirewound resistors - Assessment level: P; German version EN 140103:1996) |
DIN EN 140104-1996 |
空白详细规范:小容许负荷非绕线固定电组.评定等级SB和SC |
(Blank detail specification: Fixed low power non-wirewound resistors - Assessment levels: SB and SC; German version EN 140104:1996) |
DIN EN 14011-2003 |
水质.电捕鱼取样 |
(Water quality - Sampling of fish with electricity; German version EN 14011:2003) |
DIN EN 14015-2005 |
在室温及高于室温下液体储存用平底、立式、圆柱形、现场建造的地面上可焊钢罐的设计和制造规范 |
|
DIN EN 14016-1-2004 |
菱镁找平层用粘合剂.苛性镁和氯化镁.第1部分:定义、要求 |
|
DIN EN 14016-2-2004 |
菱镁找平层用粘合剂.苛性镁和氯化镁.第2部分:试验方法 |
|
DIN EN 14019-2004 |
幕墙.耐冲击性.性能要求 |
|
DIN EN 1402-1-2004 |
不定型耐火制品.第1部分:说明和分类 |
(Unshaped refractory products - Part 1: Introduction and classification; German version EN 1402-1:2003) |
DIN EN 1402-1-2004 |
不定型耐火制品.第1部分:说明和分类 |
|
DIN EN 1402-2-2004 |
不定型耐火制品.第2部分:检验取样 |
(Unshaped refractory products - Part 2: Sampling for testing; German version EN 1402-2:2003) |
DIN EN 1402-2-2004 |
不定型耐火制品.第2部分:检验取样 |
|
DIN EN 1402-3-2004 |
不定型耐火制品.第3部分:公认特性 |
(Unshaped refractory products - Part 3: Characterization as received; German version EN 1402-3:2003) |
DIN EN 1402-3-2004 |
不定型耐火制品.第3部分:公认特性 |
|
DIN EN 1402-4-2004 |
不定型耐火制品.第4部分:耐火混凝土一致性的测定 |
(Unshaped refractory products - Part 4: Determination of consistency of castables; German version EN 1402-4:2003) |
DIN EN 1402-4-2004 |
不定型耐火制品.第4部分:耐火混凝土一致性的测定 |
|
DIN EN 1402-5-2004 |
不定型耐火制品.第5部分:试件的制备和处理 |
(Unshaped refractory products - Part 5: Preparation and treatment of test pieces; German version EN 1402-5:2003) |
DIN EN 1402-5-2004 |
不定型耐火制品.第5部分:试件的制备和处理 |
|
DIN EN 1402-6-2004 |
不定型耐火制品.第6部分:物理特性的测量 |
(Unshaped refractory products - Part 6: Measurement of physical properties; German version EN 1402-6:2003) |
DIN EN 1402-6-2004 |
不定型耐火制品.第6部分:物理特性的测量 |
|
DIN EN 1402-7-2004 |
不定型耐火制品.第7部分:预成形型材的试验 |
(Unshaped refractory materials - Part 7: Tests on pre-formed shapes; German version EN 1402-7:2003) |
DIN EN 1402-7-2004 |
不定型耐火制品.第7部分:预成形型材的试验 |
|
DIN EN 1402-8-2004 |
不定型耐火制品.第8部分:辅助特性的测定 |
(Unshaped refractory products - Part 8: Determination of complementary properties; German version EN 1402-8:2003) |
DIN EN 1402-8-2004 |
不定型耐火制品.第8部分:辅助特性的测定 |
|
DIN EN 14020-1-2003 |
增强材料.玻璃纤维粗纱规范.第1部分:命名 |
(Reinforcements - Specification for textile glass rovings - Part 1: Designation; German version EN 14020-1:2002) |
DIN EN 14020-2-2003 |
增强材料.玻璃纤维粗纱规范.第2部分:试验方法和一般要求 |
(Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements; German version EN 14020-2:2002) |
DIN EN 14020-3-2003 |
增强材料.玻璃纤维粗纱规范.第3部分:特殊要求 |
(Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements; German version EN 14020-3:2002) |
DIN EN 140200-2002 |
分规范.高负荷固定电阻 |
(Sectional specification: Fixed power resistors; German version EN 140200:1996 + A1:2001) |
DIN EN 140201-1997 |
空白详细规范.高负荷固定电阻(评定等级S) |
(Blank detail specification: Fixed power resistors (Assessment level S); German version EN 140201:1996) |
DIN EN 140202-1997 |
空白详细规范.高负荷固定电阻(评定等级M) |
(Blank detail specification: Fixed power resistors (Assessment level M); German version EN 140201:1996) |
DIN EN 140203-1997 |
空白详细规范.高负荷固定电阻(评定等级H) |
(Blank detail specification: Fixed power resistors (Assessment level H); German version EN 140203:1996) |
DIN EN 14021-2004 |
防石头和瓦砾的越野摩托车车手保护用防石护罩.要求和试验方法 |
|
DIN EN 140210-1995 |
分规范.固定式电力电阻器.性能认可 |
(Sectional specification: Fixed power resistors - Capability approval; German version EN 140210:1994) |
DIN EN 140211-1995 |
空白详细规范.固定式电力电阻器.性能认可 |
(Blank detail specification: Fixed power resistors - Capability approval; German version EN 140211:1994) |
DIN EN 14024-2005 |
带保温层的金属异型材.机械特性.要求、验证和评定试验 |
|
DIN EN 14025 Berichtigung 1-2005 |
危险货物运输箱.金属压力箱.设计和建造.DIN EN 14025-2004的勘误 |
|
DIN EN 14025-2004 |
危险货物运输箱.金属压力箱.设计和建造 |
|
DIN EN 1403-1998 |
金属防腐蚀.电镀涂层.规范一般要求的方法 |
(Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements; German version EN 1403:1998) |
DIN EN 14030-2002 |
土工织物及其有关产品.测定抗酸和抗碱液能力的筛分试验法 |
(Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (ISO/TR 12960:1998, modified); German version EN 14030:2001) |
DIN EN 14031-2003 |
工作场所空气.气载内毒素的测定 |
(Workplace atmospheres - Determination of airborne endotoxins; German version EN 14031:2003) |
DIN EN 14034-1-2004 |
的测定 |
DIN EN 14034-1-2004 |
DIN EN 14034-4-2004 |
尘云的爆炸特性测定.第4部分:尘云的极限氧气浓度LOC的测定 |
|
DIN EN 14035-1 Berichtigung 1-2005 |
焰火.第1部分:术语 |
|
DIN EN 14035-1 Berichtigung 1-2005 |
焰火.第1部分:术语 |
|
DIN EN 14035-1-2003 |
焰火.第1部分:术语 |
(Fireworks - Part 1: Terminology; German version EN 14035-1:2003) |
DIN EN 14035-10-2004 |
焰火.第10部分:双响爆竹.规范和试验方法 |
|
DIN EN 14035-12 Berichtigung 1-2005 |
焰火.第12部分:闪光雷和闪光雷电池.规范和试验方法 |
|
DIN EN 14035-12 Berichtigung 1-2005 |
焰火.第12部分:闪光雷和闪光雷电池.规范和试验方法 |
|
DIN EN 14035-12-2003 |
焰火.第12部分:闪光雷和闪光雷电池.规范和试验方法 |
(Fireworks - Part 12: Flash bangers and flash banger batteries; Specifications and test methods; German version EN 14035-12:2003) |
DIN EN 14035-13-2004 |
焰火.第13部分:闪光弹.规范和试验方法 |
|
DIN EN 14035-15 Berichtigung 1-2005 |
焰火.第15部分:喷泉式焰火.规范和试验方法 |
|
DIN EN 14035-15 Berichtigung 1-2005 |
焰火.第15部分:喷泉式焰火.规范和试验方法 |
|
DIN EN 14035-17-2004 |
焰火.第17部分:地面旋转类.规范和试验方法 |
|
DIN EN 14035-2 Berichtigung 1-2005 |
焰火.第2部分:分类 |
|
DIN EN 14035-2 Berichtigung 1-2005 |
焰火.第2部分:分类 |
|
DIN EN 14035-20-2005 |
焰火.第20部分:跳爆竹.规范和试验方法 |
|
DIN EN 14035-22-2004 |
焰火.第22部分:烟火.规范和试验方法 |
|
DIN EN 14035-23 Berichtigung 1-2005 |
焰火.第23部分:非手持花炮.规范和试验方法 |
|
DIN EN 14035-23 Berichtigung 1-2005 |
焰火.第23部分:非手持花炮.规范和试验方法 |
|
DIN EN 14035-23-2003 |
焰火.第23部分:非手持花炮.规范和试验方法 |
(Fireworks - Part 23: Non-hand-held sparklers; Specification and test methods; German version EN 14035-23:2003) |
DIN EN 14035-24-2004 |
焰火.第24部分:喷花棒.规范和试验方法 |
|
DIN EN 14035-27 Berichtigung 1-2005 |
焰火.第27部分:火箭弹.规范和试验方法 |
|
DIN EN 14035-27 Berichtigung 1-2005 |
焰火.第27部分:火箭弹.规范和试验方法 |
|
DIN EN 14035-27-2003 |
焰火.第27部分:烟火.规范和试验方法 |
(Fireworks - Part 27: Rockets; Specification and test methods; German version EN 14035-27:2003) |
DIN EN 14035-28-2004 |
焰火.第28部分:罗马蜡烛.规范和试验方法 |
|
DIN EN 14035-29-2004 |
焰火.第29部分:蛇型烟花.规范和试验方法 |
|
DIN EN 14035-3-2004 |
焰火.第3部分:悬空轮.规范和试验方法 |
|
DIN EN 14035-34 Berichtigung 1-2005 |
焰火.第34部分:台式弹.规范和试验方法 |
|
DIN EN 14035-34 Berichtigung 1-2005 |
焰火.第34部分:台式弹.规范和试验方法 |
|
DIN EN 14035-35-2005 |
焰火.第35部分:摔炮.规范和试验方法 |
|
DIN EN 14035-36-2004 |
焰火.第36部分:轮型.规范和试验方法 |
|
DIN EN 14035-4 Berichtigung 1-2005 |
焰火.第4部分:爆竹和电池.规范和试验方法 |
|
DIN EN 14035-4 Berichtigung 1-2005 |
焰火.第4部分:爆竹和电池.规范和试验方法 |
|
DIN EN 14035-6-2004 |
焰火.第6部分:信号火焰.规范和试验方法 |
|
DIN EN 14035-7-2004 |
焰火.第7部分:信号火柴.规范和试验方法 |
|
DIN EN 14035-8-2004 |
焰火.第8部分:信号棒.规范和试验方法 |
|
DIN EN 14035-9-2004 |
焰火.第9部分:爆裂颗粒.规范和试验方法 |
|
DIN EN 14037-1-2003 |
顶棚上安装有供应120℃以下热水的辐射板.第1部分:技术规范和要求 |
(Ceiling mounted radiant panels supplied with water at temperature below 120 鳦 - Part 1: Technical specifications and requirements; German version EN 14037-1:2003) |
DIN EN 14037-2-2003 |
在顶棚安装有供应120℃以下热水的辐射板.第2部分:热输出试验方法 |
(Ceiling mounted radiant panels supplied with water at temperature below 120 鳦 - Part 2: Test method for thermal output; German version EN 14037-2:2003) |
DIN EN 14039-2005 |
废弃物表征.用气相色谱法测定C10至C40范围内的烃含量 |
|
DIN EN 140400-2002 |
分规范.低负荷可表面安装的固定电阻(SMD) |
(Sectional specification: Fixed low power surface mounting (SMD) resistors; German version EN 140400:1996 + Corrigendum:1997 + A1:2001) |
DIN EN 140400-2004 |
分规范:低负荷表面安装的固定电阻(SMD) |
|
DIN EN 140401-2002 |
空白详细规范.低负荷可表面安装非绕组线的固定电阻(SMD) |
(Blank Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors; German version EN 140401:2002) |
DIN EN 140401-801-2002 |
详细规范.低功率非线绕表面安装的固定电阻器.矩形.稳定性级别0.1、0.25、0.5和1 |
(Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1; German version EN 140401-801:2002) |
DIN EN 140401-802-2002 |
详细规范.低功率非线绕表面安装的固定电阻器.矩形.稳定性级别1和2 |
(Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 1; 2; German version EN 140401-802:2002) |
DIN EN 140401-802-2004 |
详细规范:低功率非线绕表面安装的固定电阻器.矩形.稳定性级别1和2 |
|
DIN EN 140401-803-2002 |
详细规范.低功率非线绕表面安装的固定电阻器.圆柱形.稳定性级别0.05、0.1、0.25、0.5、1和2 |
(Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2; German version EN 140401-803:2002) |
DIN EN 140401-803-2004 |
详细规范:低功率非线绕表面安装的固定电阻器.圆柱形.稳定性级别0.05、0.1、0.25、0.5、1和2 |
|