标准号 |
中文名称 |
英文名称 |
| DIN 48200-1-1981 |
架空输电绞线用单线.铜线 |
(Copper wires for stranded conductors) |
| DIN 48200-2-1981 |
架空输电绞线用单线.铜合金线 |
(Bronze wires for stranded conductors) |
| DIN 48200-7-1981 |
架空输电绞线用单线.铜包钢线 |
(Copper clad steel wires for stranded conductors) |
| DIN 48201-1-1981 |
架空输电绞线.铜绞线 |
(Copper stranded conductors) |
| DIN 48201-2-1981 |
架空输电力绞线.铜合金(B2)绞线 |
(Bronze stranded conductors) |
| DIN 48201-3-1984 |
电力电缆.钢绳 |
(Steel stranded conductors) |
| DIN 48201-7-1981 |
电力电缆.铜包钢绞线 |
(Copper clad steel stranded conductors) |
| DIN 48203-1-1984 |
铜导线用线材和绞线.交货的技术条件 |
(Copper wires and copper stranded conductors; technical delivery conditions) |
| DIN 48203-2-1984 |
铜塑合金导线用线材和绞线.交货技术条件 |
(Wrought copper alloy (Bz) wires and conductors; technical delivery conditions) |
| DIN 48203-7-1984 |
钢铜导线用线材和绞线.交货的技术条件 |
(Copper covered steel wires and copper covered steel stranded conductors; technical delivery conditions) |
| DIN 48207-1978 |
电力绞线.架空绞线的架设 |
(Stranded conductors; laying of stranded conductors for overhead lines) |
| DIN 48207-2-2005 |
额定电压超过1KV的架空线.导体安装的方法和设备.第2部分:电缆钳 |
|
| DIN 48207-3-2005 |
额定电压超过1KV的架空线.导体安装的方法和设备.第3部分:带球形接头的电缆连接件 |
|
| DIN 48215-1978 |
电力架空线用端子和连接件.要求 |
(Clamps and connections for overhead power lines; requirements) |
| DIN 48217-1978 |
电力架空线和滑接馈线设备用缺口连接器 |
(Notch connectors) |
| DIN 483-1981 |
混凝土路边石 |
(Concrete kerbs) |
| DIN 483-2004 |
混凝土路缘块体.形状、尺寸和标记 |
|
| DIN 483-2004 |
混凝土路缘块体.形状、尺寸和标记 |
|
| DIN 483-2005 |
混凝土路缘石块体.形状、尺寸和标记 |
|
| DIN 48300-1981 |
通信架空线用导线 |
(Wires for telecommunication lines) |
| DIN 48319-1962 |
电力架空线用钩头螺栓 |
(Hook screws) |
| DIN 48323-1957 |
通信电力架空线.拉索用夹紧装置 |
(Telecommunication and power current overhead lines; turnbuckle for stay ropes) |
| DIN 48324-1959 |
1KV以下通信线路和电力架空线.系杆.墙板.环形螺母 |
(Telecommunication and power current overhead lines below 1 kV; tie bar, wall plate, lifting eye nut) |
| DIN 48327-1978 |
通信架空线用接线套管 |
(Jointing sleeves) |
| DIN 48328-1943 |
1KV以下通信和电力架空线.拉线杆 |
(Telecommunication and power current overhead lines below 1 kV; anchor logs) |
| DIN 48334-1977 |
螺旋扣.封闭型 |
(Turnbuckles for overhead power lines) |
| DIN 48335-1944 |
通信电力架空线.电缆夹 |
(Power current and telecommunication overhead lines; wire rope clamps) |
| DIN 48342-1947 |
通信电力架空线.钢丝绳张紧夹 |
(Strain clamp for steel ropes) |
| DIN 48345-1968 |
攀登木电线杆用的脚扣 |
(Climbing irons for wooden poles) |
| DIN 48350-1954 |
通信电力架空线.木质电线杆 |
(Telecommunication and power current overhead lines; wooden poles) |
| DIN 48351 Bb.1-1967 |
电力架空线.A型电线杆.公式和计算原理 |
(A-masts; formulas and calculations) |
| DIN 48351-1-1967 |
电力架空线.A型电线杆.主要尺寸 |
(A-masts; main dimensions) |
| DIN 48351-2-1967 |
电力架空线.A型电线杆.螺栓.螺母.垫圈 |
(A-masts; bolts, nuts, washers) |
| DIN 48353-1-1965 |
20KV以下单线线路用钢筋混凝土电线杆和横梁 |
(Steel-concrete masts for simplex circuits up to 20 kV) |
| DIN 48353-2-1965 |
钢筋混凝土电线杆和横梁.电线杆的选用准则 |
(Steel-concrete masts; directions for choosing the masts) |
| DIN 4844-1 Berichtigung 1-2003 |
对DIN4844-1:2002-11的勘误 |
(Corrigenda to DIN 4844-1:2002-11) |
| DIN 4844-1-2002 |
安全标志.第1部分:目视距离尺寸 |
(Safety marking - Part 1: Dimensions, distance of observation) |
| DIN 4844-2-2001 |
安全标志.第2部分:安全标志总览 |
(Safety marking - Part 2: Overview of safety signs) |
| DIN 4844-2/A1-2004 |
安全识别.第2部分:安全符号概览.修改件 A1 |
|
| DIN 4844-3-2003 |
安全标志.第3部分:逃生和营救示意图 |
(Safety marking - Part 3: Escape- and rescueplan) |
| DIN 485-1987 |
人行道的混凝土铺面石 |
(Precast concrete paving flags) |
| DIN 48500-1974 |
功率电容器.交货技术条件 |
(Power capacitors; technical delivery conditions) |
| DIN 48600-1979 |
工业电热装置.感应加热装置用高频设备的功率测量.高频发生器输出功率的测量方法 |
(Industrial electro-heat equipment; power measurement on high-frequency appliances for induction heating equipment, measuring method for determination of power output of high-frequency generators) |
| DIN 48699-1983 |
带电作业辅助工具的标志 |
(Marking of tools for live working) |
| DIN 487-1971 |
界石.里程石 |
(Boundary stones; number stones) |
| DIN 488-1-1984 |
钢筋.等级、特性和标志 |
(Reinforcing steels; grades, properties, marking) |
| DIN 488-2-1986 |
混凝土用钢材.混凝土棒钢.尺寸和重量.混凝土钢.棒钢 |
(Reinforcing steel; reinforcing steel bars; dimensions and masses) |
| DIN 488-4-1986 |
混凝土用钢材.混凝土钢网和混凝土钢丝.结构.尺寸和重量 |
(Reinforcing steel; reinforcing steel fabric and wire; design, dimensions and masses) |
| DIN 488-6-1986 |
混凝土用钢材.检测(质量检测) |
(Reinforcing steel; inspection) |
| DIN 488-7-1986 |
混凝土用钢材.条钢筋的焊接适应性的验证.检验的实施和评价 |
(Reinforcing steel; verification of weldability of reinforcing steel bars; test procedure and evaluation) |
| DIN 48803-1985 |
避雷装置.零部件配置和安装尺寸 |
(Lightning protection system; arrangement of components and dimensions for mounting) |
| DIN 48804-1985 |
避雷装置.导线和零件的固定件 |
(Lightning protection system; fixing parts for conductors and components) |
| DIN 48805-1989 |
避雷装置.杆支架 |
(Lightning protection system; rod holders) |
| DIN 48806-1985 |
避雷装置.导线和零件的名称和概念 |
(Lightning protection system; terms and definitions for conductors and components) |
| DIN 48810-2001 |
避雷装置.火星间隙.要求,试验 |
(Lightning protection system - Spark gap - Requirements, tests) |
| DIN 48811-1985 |
避雷装置.软屋顶用导线架.夹紧盖 |
(Lightning protection system; roof conductor holders for highly combustible roofs; span cap) |
| DIN 48812-1985 |
避雷装置.软屋顶用导线架.木杆 |
(Lightning protection system; roof conductor holders for highly combustible roofs; wooden stake) |
| DIN 48820-1967 |
图样上避雷防护构件用示意图 |
(Symbols for building parts for lightning protection in drawings) |
| DIN 48821-1985 |
避雷装置.号码牌 |
(Lightning protection system; number plates) |
| DIN 48827-1985 |
避雷装置.软屋顶用导线支架.檐口支架和卡箍 |
(Lightning protection system; roof conductor holders for highly combustible roofs; dripping support and strain block) |
| DIN 48828-1989 |
避雷装置.导线支架 |
(Lightning protection system; conductor holders) |
| DIN 48829-1985 |
避雷装置.屋顶导线架.平屋顶的导线架和固定板 |
(Lightning protection system; roof conductor holders; conductor holders and fixing plates for flat roofs) |
| DIN 48830-1985 |
避雷装置.说明书 |
(Lightning protection system; description) |
| DIN 48831-1985 |
避雷装置.检验报告 |
(Lightning protection system; test report) |
| DIN 48832-1985 |
避雷装置.集电极板 |
(Lightning protection system; mushroom-type collector) |
| DIN 48839-1985 |
避雷装置.隔离箱和隔离柜架 |
(Lightning protection system; inspection box and frame for testing joints) |
| DIN 4890-1975 |
英寸-毫米.换算依据 |
(Inch - Millimetre; Fundamentals for Conversion) |
| DIN 4892-1975 |
英寸-毫米.换算表 |
(Inch - Millimetre; Conversion Tables) |
| DIN 4893-1965 |
毫米-英寸.1-10000mm换算表 |
(Millimetre - inch; conversion tables from 1 up to 10000 mm) |
| DIN 4895-1-1977 |
正交坐标系.一般概念 |
(Orthogonal coordinate systems; general concepts) |
| DIN 4895-2-1977 |
正交坐标系.向量分析的微分算子 |
(Orthogonal coordinate systems; differential operators of vector analysis) |
| DIN 4896-1973 |
简单的电解溶液.符号 |
(Simple electrolyte solutions; symbols) |
| DIN 4898-1975 |
德语词条“双关“、“反义“、“同义“和“补充词“的使用 |
(The use of the German terms “dual“, “invers“, “reziprok“, “剄uivalent“, “komplement剅“) |
| DIN 4899-1978 |
线性多端口 |
(Linear electric multiports) |
| DIN 49003-1956 |
安装管.钢制铠装管和插管用弯头 |
(Conduit for electrical wiring; arches for steel armoured conduits and plain conduits) |
| DIN 49005-1956 |
安装管.钢制铠装管和插管用末端管套 |
(Conduit for electrical wiring; bushing nipples for steel armoured conduits) |
| DIN 49012-1982 |
电气配线用导管和附件.适于重机械应力的金属软管.结构形式和要求 |
(Conduits and fittings for electrical installation; flexible metal conduits for heavy mechanical stresses construction types and requirements) |
| DIN 49016-1-1979 |
电气配线用导管和附件.刚性耐火绝缘材料管和附件.中型和重型压力负荷用管.光滑套管.弯头 |
(Conduits and fittings for electrical installation; rigid non-flame propagating insulating conduits and fittings, plain conduits couplers and bends for medium and heavy pressure strength) |
| DIN 49016-2-1981 |
电气配线用导管和附件.刚性耐火绝缘材料管和附件.中型和重型压力负荷用光滑套管.套管弯头 |
(Conduits and fittings for electrical installation; rigid non-flame propagating insulating conduits and fittings; plain conduits with coupler and bends with coupler for medium and heavy pressure strength) |
| DIN 49017-1-1979 |
电气配线用导管和附件.刚性耐火绝缘材料管和附件.轻型压力负荷用管.光滑套管.弯头 |
(Conduits and fittings for electrical installation; rigid non-flame propagating insulating conduits and fittings, plain couplers and bends for light pressure strength) |
| DIN 49017-2-1981 |
电气配线用导管和附件.刚性耐火绝缘材料管和附件.轻型压力负荷用光滑套管.套管弯头 |
(Conduits and fittings for electrical installation; rigid nonflame propagating insulating conduits and fittings; plain conduits with coupler and bends with coupler for light pressure strength) |
| DIN 49018-1-1972 |
电气配线用导管和附件.柔性耐火绝缘材料管和附件.中型和轻型压力负荷用波纹套管 |
(Conduits and fittings for electrical installation; flexible corrugated and inflammable conduits of insulating material and couplers for middle and light pressure load) |
| DIN 49018-2-1972 |
电气配线用导管和附件.柔性耐火绝缘材料管.重型压力负荷用带光滑套波纹套管 |
(Conduits and fittings for electrical installation; flexible corrugated and inflammable conduits of insulating material with plain mantle and for heavy pressure load) |
| DIN 49019-1-1972 |
电气配线用导管和附件.柔性不耐火绝缘材料管.中型和轻型压力负荷用光滑管 |
(Conduits for electrical installation; flexible plain and non inflammable conduits of insulating material for middle and light pressure load) |
| DIN 49019-2-1978 |
电气配线用导管和附件.柔性不耐火绝缘材料管.中型压力负荷用光滑管 |
(Conduits for electrical installation; flexible plain and non inflammable conduits of insulating material for medium pressure load) |
| DIN 49019-3-1975 |
电气配线用导管和附件.柔性不耐火波形绝缘材料管耐轻压和105℃以下 |
(Conduits and fittings for electrical installation; flexible corrugated and non inflammable conduits of insulating material for light pressure load and a heat resistance up to 105 C) |
| DIN 4902-1972 |
地面运输工具；手推车和拖车.动轮.符号.术语.说明 |
(Industrial trucks, hand-carriage and trailer, movement-wheels, symbols, terms, explanations) |
| DIN 49020-1959 |
电气配线用导管.螺口钢制导管.平口导管.管接头 |
(Conduit for Electrical Wiring; Screwed Steel Conduit, Plain Conduit, Couplers) |
| DIN 49023-1975 |
电气配线用导管和附件.高压力负荷用柔性波纹钢管 |
(Conduits and fittings for electrical installation; flexible corrugated conduits of steel) |
| DIN 49049-1960 |
对钢锁装管内径的导线分配 |
(Allocation of the lines to the pipe diameters of steel armoured conduits) |
| DIN 49073-1-1990 |
金属制仪表盒和16A250V以下装修辅助仪器用绝缘材料.主要尺寸 |
(Metal boxes and boxes of isulating material for accomodation of accessories up to 16 A 250 V; main dimensions) |
| DIN 49073-3-1999 |
符合DIN49445,DIN49447和DINEN60309-2(VDE0626第20部分)要求,32A690V以下的插接盒的沉入安装用金属制仪器盒 |
(Metal boxes and boxes of insulating material for recessed mounting for accommodation of socket-outlets according to DIN 49445, DIN 49447 and DIN EN 60309-2 (VDE 0623 Teil 20) up to 32 A 690 V - Main dimensions) |
| DIN 49075-1-1989 |
装入带φ45mm孔经和固定接头的仪表盒的电器安装仪表用盖板.主要尺寸 |
(Cover plates for use with switches, socket-outlets and other accessories intended to be mounted into mounting boxes with openings having a diameter of 45 mm and with specified inserts; main dimensions) |
| DIN 49075-2-1989 |
装入孔径不是φ45mm.不带接头的仪表盒的电器安装仪表用盖板.主要尺寸 |
(Cover plates for use with switches, socket-outlets and other accessories intended to be mounted into mounting boxes with openings other than of diameter 45 mm without inserts; main dimensions) |
| DIN 49076-1989 |
电器仪表安装用电器安装槽面板的开口.主要尺寸 |
(Openings in front covers of ducting and trunking for use with switches, socket-outlets and other accessories to be mounted into mounting boxes; main dimensions) |
| DIN 49100-1987 |
带保护触点DC.10A.250V.AC16A250V和16A250V以下室内布线开关的两极接线盒用基座.固定尺寸 |
(Base for two-pole socket-outlets with earthing contacts 10 A 250 V d.c., 16 A 250 V a.c. and switches up to 16 A 250 V; mounting dimensions) |
| DIN 4918-1989 |
加固钻孔用带螺纹连接的无缝钻管 |
(Screwed seamless casing pipes) |
| DIN 49200-1987 |
２５０Ｖ.１６Ａ以下的室内布线开关 |
(Switches up to 16 A 250 V for flush and surface mounting) |
| DIN 4922-1-1978 |
带开槽搭接孔和鱼尾板连接的钻井用钢制滤管 |
(Steel Filter Pipes for Drilled Wells with Slot Perforation and Fisching (Butt Strap Joint)) |
| DIN 4922-2-1981 |
钻井用钢过滤器.螺纹连接.DN100至DN500 |
(Steel Filter Pipes for Drilled Wells with Screwed Connection DN 100 to DN 500) |
| DIN 4922-3-1975 |
钻井用钢滤管.法兰连接.公称直径500至1000 |
(Steel Filter Pipes for Drilled Wells; Flanged Connection, NW 500 to NW 1000 (Nominal Diameter 500 to 1000)) |
| DIN 4922-4-1999 |
钻井用钢滤管.第4部分:DN100至DN500抗拉插接套管连接件 |
(Steel filter pipes for drilled wells - Part 4: With tension proof socket joint; DN 100 to DN 500) |
| DIN 4924-1998 |
水井结构用砂和砂砾.要求和检验 |
(Sands and gravels for well construction - Requirements and testing) |
| DIN 4925-1-1999 |
钻井用未增塑聚氯乙烯过滤管和实壁管.第1部分:带惠氏标准管螺纹DN35至DN100 |
(Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 1: DN 35 to DN 100 with Whitworth-pipe thread) |
| DIN 4925-2-1999 |
钻井用未增塑聚氯乙烯过滤管和实壁管.第2部分:带梯形螺纹的DN100-DN200 |
(Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 2: DN 100 to DN 200 with trapezoidal thread) |
| DIN 4925-3-1999 |
钻井用未增塑聚氯乙烯过滤管和实壁管.第3部分:带梯形螺纹的DN250至DN400 |
(Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube well - Part 3: DN 250 to DN 400 with trapezoidal thread) |
| DIN 4926-1995 |
钢制井头.DN400至DN1200 |
(Steel wellheads - ND 400 to ND 1200) |
| DIN 4927-1995 |
水输送用钢制法兰提升管.DN50至DN200 |
(Flanged steel rising pipes for raising of water - Nominal diameter 50 to 200) |
| DIN 49284-1963 |
带有T标记.交流250V.15A和交流380V.10A的两极仪表开关.安装尺寸 |
(Two-pole plug switch with T-symbol for hot conditions; mounting dimensions) |
| DIN 49290-1961 |
电气安装器材.开关的标识 |
(Classification of switches according to connections) |
| DIN 4930-1989 |
通风井的冷却外管及连接.尺寸和交货技术条件 |
(Pipes for use in freezing shaft sinking; dimensions and technical delivery conditions) |
| DIN 49300-1979 |
D熔断器.一览表 |
(D-type fuses; synopsis) |
| DIN 49301-1985 |
D熔断器.D型旋入式接触螺钉的螺纹.DⅡ和DⅢ型 |
(D-type fuses; withworth thread for screw-in gauge rings D II and D III) |
| DIN 49325-1980 |
D型环形接触螺钉用E１６.２５A.５００V内装式带盖正面接线的D型熔断器底座 |
(D-type fuse-bases E 16, 25 A, 500 V, for front connection, with cover, for flush mounting, for gauge rings) |
| DIN 49326-1-1985 |
D型环形接触螺钉用DⅡ.２５A.５００V内装式带盖正面接线的D型熔断器底座 |
(D-type fuse-bases D II 25 A 500 V for front connection, with cover, for flush mounting, for gauge rings) |
| DIN 49326-2-1985 |
D型环形接触螺钉用DⅡ.２５A.５００V内装式不带盖正面接线的D型熔断器底座 |
(D-type fuse-bases D II 25 A 500 V for front connection, without cover, for flush mounting, for gauge rings) |
| DIN 49327-1-1985 |
D型环形接触螺钉.DⅡ63A.660V以下正面接线内装式带盖的D型熔断器底座 |
(D-type fuse-bases D III 63 A up to 660 V for front connection, with cover, for flush mounting, for gauge rings) |
| DIN 49327-2-1985 |
D型环形接触螺钉.DⅢ63A.660V以下正面接线内装式不带盖的D型熔断器底座 |
(D-type fuse-bases D III 63 A up to 660 V for front connection, without cover, for flush mounting, for gauge rings) |
| DIN 49328-1985 |
D型环形接触螺钉.DⅢ63A.750V正面接线的D型熔断器底座 |
(D-type fuse-bases for front connection, for push-in gauge rings, D III 63 A 750 V) |
| DIN 49329-1985 |
DⅣ100A.750V正面接线的D型熔断器底座 |
(D-type fuse-bases for front connection; D IV 100 A 750 V) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com