标准号 |
中文名称 |
英文名称 |
| DIN EN 13310-2003 |
厨房洗涤槽.功能要求和试验方法 |
(Kitchen sinks - Functional requirements and test methods; German version EN 13310:2003) |
| DIN EN 133100-1999 |
分规范.抑制电磁干扰用无源滤波器.规定用于无安全检验的滤波器 |
(Sectional specification: Passive filter units for electromagnetic interference suppression - Filters for which safety tests are not required; German version EN 133100:1998) |
| DIN EN 133101-1999 |
空白详细规范.抑制电磁干扰用无源滤波器.规定用于无安全检验的滤波器 |
(Blank detail specification: Passive filter units for electromagnetic interference suppression - Filters for which safety tests are not required; German version EN 133101:1998) |
| DIN EN 13311-1-2001 |
生物技术.容器的性能标准.第1部分:一般性能标准 |
(Biotechnology - Performance criteria for vessels - Part 1: General performance criteria; German version EN 13311-1:2001) |
| DIN EN 13311-2-2001 |
生物技术.容器的性能标准.第2部分:防压装置 |
(Biotechnology - Performance criteria for vessels - Part 2: Pressure protection devices; German version EN 13311-2:2001) |
| DIN EN 13311-3-2001 |
生物技术.容器的性能标准.第3部分:玻璃压力容器 |
(Biotechnology - Performance criteria for vessels - Part 3: Glass pressure vessels; German version EN 13311-3:2001) |
| DIN EN 13311-4-2001 |
生物技术.容器的性能标准.第4部分:生物反应器 |
(Biotechnology - Performance criteria for vessels - Part 4: Bioreactors; German version EN 13311-4:2001) |
| DIN EN 13311-5-2001 |
生物技术.容器的性能标准.第5部分:杀死罐 |
(Biotechnology - Performance criteria for vessels - Part 5: Kill tanks; German version EN 13311-5:2001) |
| DIN EN 13311-6-2001 |
生物技术.容器的性能标准.第6部分:色谱柱 |
(Biotechnology - Performance criteria for vessels - Part 6: Chromatography columns; German version EN 13311-6:2001) |
| DIN EN 13312-1-2001 |
生物技术.管路和仪器装置的性能标准.第1部分:通用性能标准 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria; German version EN 13312-1:2001) |
| DIN EN 13312-2-2001 |
生物技术.管路和仪器装置的性能标准.第2部分:耦合 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 2: Couplings; German version EN 13312-2:2001) |
| DIN EN 13312-3-2001 |
生物技术.管路和仪器装置的性能标准.第3部分:取样和接种设备 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 3: Sampling and inoculation devices; German version EN 13312-3:2001) |
| DIN EN 13312-4-2001 |
生物技术.管路和仪器装置的性能标准.第4部分:管 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes; German version EN 13312-4:2001) |
| DIN EN 13312-5-2001 |
生物技术.管路和仪器装置的性能标准.第5部分:阀门 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 5: Valves; German version EN 13312-5:2001) |
| DIN EN 13312-6-2001 |
生物技术.管路和仪器装置的性能标准.第6部分:设备探针 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 6: Equipment probes; German version EN 13312-6:2001) |
| DIN EN 13313-2002 |
制冷系统和热泵.人员能力. |
(Refrigerating systems and heat pumps - Competence of personnel; German version EN 13313:2001) |
| DIN EN 13314-2003 |
危险物品运输用槽罐车.槽罐车的辅助设备.装填孔的封盖 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover; German version EN 13314:2002) |
| DIN EN 13315-2002 |
危险物品运输用的槽罐车.槽罐车用设备.重力式卸载耦合器 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Gravity discharge coupler; German version EN 13315:2002) |
| DIN EN 13316-2003 |
危险物品运输用槽罐车.槽罐车用辅助设备.压力平衡底阀 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve; German version EN 13316:2002) |
| DIN EN 13317-2003 |
危险物品运输用槽罐车.槽罐车的辅助设备.人孔封盖组件 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly; German version EN 13317:2002) |
| DIN EN 13318-2000 |
找平材料和地板找平层.定义 |
(Screed material and floor screeds - Definitions; Trilingual version EN 13318:2000) |
| DIN EN 13319-2000 |
潜水设备附件.深度规和深度及时间组合测量设备.功能和安全要求、试验方法 |
(Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and safety requirements, test methods; German version EN 13319:2000) |
| DIN EN 1332-1-2000 |
识别卡系统.人机接口.第1部分:用户界面的设计原理 |
(Identification card systems - Man-machine interface - Part 1: Design principles for the user interface; German version EN 1332-1:1999) |
| DIN EN 1332-2-1999 |
识别卡系统.人机界面.第2部分:ID-1-卡用电键标识的尺寸和排列 |
(Identification card systems - Man-machine interface - Part 2: Dimensions and location of a tactile identifier for ID-1 cards; German version EN 1332-2:1998) |
| DIN EN 1332-3-2000 |
识别卡系统.人机界面.第3部分:小键盘 |
(Identification card systems - Man-machine interface - Part 3: Key pads; German version EN 1332-3:1999) |
| DIN EN 1332-4-2000 |
识别卡系统.人机界面.第4部分:有特殊需求的人员用用户要求的编码 |
(Identification card systems - Man-machine interface - Part 4: Coding of user requirements for people with special needs; German version EN 1332-4:1999) |
| DIN EN 13320-2002 |
表面活性剂.乙氧基化物中游离的环氧乙烷的气相色谱法痕量测定 |
(Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates; German version EN 13320:2002) |
| DIN EN 133200-2000 |
分规范.电磁干扰抑制用无源滤波器装置(安全试验规定的滤波器) |
(Sectional specification - Passive filter units for electromagnetic interference suppression (filters, for which safety tests are required); German version EN 133200:1999) |
| DIN EN 133201-1999 |
空白详细规范.抑制电磁干扰的无源滤波器.按规定需作安全检验的滤波器 |
(Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required; German version EN 133201:1998) |
| DIN EN 13322-1-2003 |
可运输的气瓶.可再充气的焊接钢气瓶.设计和制造.第1部分:碳钢 |
(Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel; German version EN 13322-1:2003) |
| DIN EN 13322-2-2003 |
可运输的气瓶.可再充气的焊接钢气瓶.设计和制造.第2部分:不锈钢 |
(Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2: Stainless steel; German version EN 13322-2:2003) |
| DIN EN 133221-1999 |
空白详细规范.抑制电磁干扰的无源滤波器.按规定需作安全检验的滤波器(仅仅是安全性检验) |
(Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required (Safety tests only); German version EN 133221:1998) |
| DIN EN 13328-1-2002 |
麻醉和呼吸用呼吸系统过滤器.第1部分:过滤性能评估用盐雾试验法 |
(Breathing system filters for anaesthetic and respiratory use - Part 1: Salt test method to assess filtration performance; German version EN 13328-1:2001) |
| DIN EN 13328-2-2003 |
麻醉和呼吸用呼吸系统过滤器.第2部分:非过滤方面 |
(Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects; German version EN 13328-2:2002) |
| DIN EN 13328-2-2004 |
麻醉和呼吸用呼吸系统过滤器.第2部分:非过滤方面 |
|
| DIN EN 13329-2000 |
叠层地板覆盖物.规范、要求和试验方法 |
(Laminate floor coverings - Specifications, requirements and test methods; German version EN 13329:2000) |
| DIN EN 1333-1996 |
管道部件.PN的定义和选择 |
(Pipework components - Definition and selection of PN; German version EN 1333:1996) |
| DIN EN 13330-2003 |
百叶窗.硬物体冲击试验方法 |
(Shutters - Hard body impact - Test method; German version EN 13330:2002) |
| DIN EN 13331-1-2002 |
电缆线铺设系统.第1部分:产品规范 |
(Trench lining systems - Part 1: Product specifications; German version EN 13331-1:2002) |
| DIN EN 13331-2-2002 |
电缆线铺设系统.第2部分:计算试验进行评价 |
(Trench lining systems - Part 2: Assessment by calculation or test; German version EN 13331-2:2002) |
| DIN EN 13335-2002 |
皮革.物理和机械试验.由皮革弯曲法测定抗弯曲强度 |
(Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method; German version EN 13335:2002) |
| DIN EN 13336-2004 |
皮革.装饰皮革特性.家具用皮革的选择指南 |
|
| DIN EN 1334-1996 |
居室家具.床和床垫.测量方法和公差建议 |
(Domestic furniture - Beds and mattresses - Methods of measurement and recommended tolerances; German version EN 1334:1996) |
| DIN EN 13341-2005 |
家用燃料油、煤油和柴油地上储存用热塑性固定油箱.利用阴离子聚合吹塑成形聚乙烯油箱、旋转模制聚乙烯和聚酰胺6油箱.要求和试验方法 |
|
| DIN EN 13342-2001 |
污泥特性.基耶达尔氮的测定 |
(Characterization of sludges - Determination of Kjeldahl nitrogen; German version EN 13342:2000) |
| DIN EN 13346-2001 |
污泥的特性.痕量素和含磷化合物的测定.王水萃取法 |
(Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods; German version EN 13346:2000) |
| DIN EN 13347-2003 |
铜和铜合金.焊接和类似锌铜焊接用铜棒和铜丝 |
(Copper and copper alloys - Rod and wire for welding and braze welding; German version EN 13347:2002) |
| DIN EN 13348-2001 |
铜和铜合金.无缝的,医用气体或真空用的园铜管 |
(Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum; German version EN 13348:2001) |
| DIN EN 13348-2005 |
铜和铜合金.医用气体或真空用无缝圆形铜管 |
|
| DIN EN 13349-2002 |
铜和铜合金.固体外封的预绝缘处理的铜管 |
(Copper and copper alloys - Pre-insulated copper tubes with solid covering; German version EN 13349:2002) |
| DIN EN 1335-1 Berichtigung 1-2002 |
DINEN1335-1:2002(EN1335-1:2000/AC:2002)勘误 |
(Corrigenda to DIN EN 1335-1:2002 (EN 1335-1:2000/AC:2002)) |
| DIN EN 13352-2002 |
自动罐装容量量规性能规范 |
(Specification for the performance of automatic tank contents gauges; German version EN 13352:2002) |
| DIN EN 13353-2003 |
实心木制板材(SWP).要求 |
(Solid wood panels (SWP) - Requirements; German version EN 13353:2003) |
| DIN EN 13356-2001 |
非专业用高清晰度组件.试验方法和要求 |
(Visibility accessories for non-professional use - Test methods and requirements; German version EN 13356:2001) |
| DIN EN 13357-2003 |
沥青和沥青粘合剂.石油轻制和软制沥青流出时间的测定 |
(Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens; German version EN 13357:2002) |
| DIN EN 13358-2004 |
沥青和沥青粘结剂.石油稀释沥青产品的蒸馏特性测定 |
|
| DIN EN 13360-2003 |
橡胶或涂塑料纤维.三语种术语 |
(Rubber- or plastics-coated fabrics - Terminology; Trilingual version EN 13360:2002) |
| DIN EN 13361-2004 |
土工合成阻挡层.建造水库和坝时要求的特性 |
|
| DIN EN 13362-2005 |
土工合成阻挡层.运河建设中使用的特定要求 |
|
| DIN EN 13362-2005 |
土工合成阻挡层.运河建设中使用的特定要求 |
|
| DIN EN 13363-2-2005 |
装有玻璃窗的遮阳设备.太阳能和光的透射率总量计算.第2部分:详细的计算方法 |
|
| DIN EN 13364-2002 |
天然石料试验方法.在榫钉孔处断裂荷载的测定 |
(Natural stone test methods - Determination of the breaking load at dowel hole; German version EN 13364:2001) |
| DIN EN 13365-2002 |
可运输储气瓶.永久的液化气体(乙炔除外)的钢瓶组件.灌装时的检验 |
(Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at the time of filling; German version EN 13365:2002) |
| DIN EN 13365-2005 |
可运输的储气瓶.永久气体和液化气体(乙炔除外)用钢瓶组件.灌装时的检验 |
|
| DIN EN 13366-2001 |
肥料.螯合的微量养料含量和微量养料的螯合系数测定用阳离子交换树脂处理 |
(Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients; German version EN 13366:2001) |
| DIN EN 13368-1-2001 |
肥料.用离子色谱法测定肥料中的螯合剂.第1部分:EDTA、HEDTA和DTPA |
(Fertilizers - Determination of chelating agents in fertilizers by ion chromatography - Part 1: EDTA, HEDTA and DTPA; German version EN 13368-1:2001) |
| DIN EN 13368-2-2001 |
肥料.用离子色谱法对肥料中螯合剂的测定.第2部分:EDDHA和EDDHMA |
(Fertilizers - Determination of chelating agents in fertilizers by ion chromatography - Part 2: EDDHA and EDDHMA; German version EN 13368-2:2001) |
| DIN EN 13369-2001 |
预制混凝土产品的共同规则 |
(Common rules for precast concrete products; German version EN 13369:2001) |
| DIN EN 13369-2004 |
预制混凝土产品的通用规则 |
|
| DIN EN 1337-1-2001 |
结构轴承.第1部分:一般设计规则 |
(Structural bearings - Part 1: General design rules; German version EN 1337-1:2000) |
| DIN EN 1337-11-1998 |
建筑业用轴承.第11部分:运输,中途存放和安装 |
(Structural bearings - Part 11: Transport, storage and installation; German version EN 1337-11:1997) |
| DIN EN 1337-2-2001 |
结构轴承.第2部分:滑动件 |
(Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2000) |
| DIN EN 1337-2-2004 |
结构轴承.第2部分:滑动件 |
|
| DIN EN 1337-3-2005 |
结构轴承.第3部分:弹性轴承 |
|
| DIN EN 1337-4-2004 |
结构轴承.第4部分:滚柱轴承 |
|
| DIN EN 1337-5-2005 |
结构轴承.第5部分:锅状轴承 |
|
| DIN EN 1337-6-2004 |
结构轴承.第6部分:摇座 |
|
| DIN EN 1337-7-2001 |
结构轴承.第7部分:球面和滚柱聚四氟乙烯轴承 |
(Structural bearings - Part 7: Spherical and cylindrical PTFE bearings; German version EN 1337-7:2000) |
| DIN EN 1337-7-2004 |
结构轴承.第7部分:球面和滚柱聚四氟乙烯轴承 |
|
| DIN EN 1337-9-1998 |
建筑业用轴承.第9部分:防护 |
(Structural bearings - Part 9: Protection; German version EN 1337-9:1997) |
| DIN EN 13370-2003 |
废弃物特征.提取物分析.铵、AOX、传导性、汞、苯酚指数、TOC、CN、易析出性和F的测定 |
(Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, CN easily liberatable, F; German version EN 13370:2003) |
| DIN EN 13371-2002 |
低温容器.低温设施的联接 |
(Cryogenic vessels - Couplings for cryogenic service; German version EN 13371:2001) |
| DIN EN 13373-2003 |
自然石材试验方法.块材几何特性的测定 |
(Natural stone test methods - Determination of geometric characteristics on units; German version EN 13373:2003) |
| DIN EN 13374-2004 |
临时边缘加固系统.产品规范和试验方法 |
|
| DIN EN 13375-2004 |
防水柔性薄板.车辆通行用混凝土桥板和其他混凝土表面的防水.样品制备 |
|
| DIN EN 13377-2002 |
预制的木模板梁.要求、分类和评定 |
(Prefabricated timber formwork beams - Requirements, classification and assessment; German version EN 13377:2002) |
| DIN EN 13378-2002 |
面食加工设备.面食加工.安全性和卫生要求 |
(Pasta processing plants - Pasta presses - Safety and hygiene requirements; German version EN 13378:2001) |
| DIN EN 13379-2002 |
面食加工设备.成条机、脱皮机和切割机、胶质料运送带、胶质料料斗.安全性和卫生要求. |
(Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements; German version EN 13379:2001) |
| DIN EN 1338-2003 |
铺路混凝土砌块.要求和试验方法 |
(Concrete paving blocks - Requirements and test methods; German version EN 1338:2003) |
| DIN EN 13380-2001 |
外部建筑排水和下水道系统翻新和修理用构件的一般要求 |
(General requirements for components used for renovation and repair of drain and sewer systems outside buildings; German version EN 13380:2001) |
| DIN EN 13382-2003 |
材料搬运用平托盘.主要尺寸 |
(Flat pallets for materials handling - Principal dimensions; German version EN 13382:2002) |
| DIN EN 13383-1 Berichtigung 1-2004 |
对DIN EN 13383-1-2002的勘误 |
|
| DIN EN 13383-1-2002 |
钢筋石.第1部分:规范 |
(Armourstone - Part 1: Specification; German version EN 13383-1:2002) |
| DIN EN 13383-2-2002 |
钢筋石.第2部分:试验方法 |
(Armourstone - Part 2: Test methods; German version EN 13383-2:2002) |
| DIN EN 13384-1-2003 |
烟囱.动态流量计算方法.第1部分:烟囱专用设施 |
(Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance; German version EN 13384-1:2002) |
| DIN EN 13385-2002 |
可运输储气瓶.永久的液化气体(乙炔除外)用蓄电池驱动车辆.灌装时的检验 |
(Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at the time of filling; German version EN 13385:2002) |
| DIN EN 1339-2003 |
铺路混凝土石板.要求和试验方法 |
(Concrete paving flags - Requirements and test methods; German version EN 1339:2003) |
| DIN EN 13390-2002 |
食品加工机.馅饼和果馅糕点机.安全和卫生要求 |
(Food processing machinery - Pie and tart machines - Safety and hygiene requirements; German version EN 13390:2002) |
| DIN EN 13391-2004 |
后张法预应力混凝土的机械试验 |
|
| DIN EN 13392-2001 |
纺织材料.单纤维丝.线密度的测定 |
(Textiles - Monofilaments - Determination of linear density; German version EN 13392:2001) |
| DIN EN 13393-2001 |
包装.边缘保护器的规范 |
(Packaging - Specification for edge protectors; German version EN 13393:2001) |
| DIN EN 13394-2001 |
包装.非金属拉伸箍带的规范 |
(Packaging - Specification for non-metallic tensional strapping; German version EN 13394:2001) |
| DIN EN 13395-1-2002 |
混凝土构件维修和保护用产品和系统.试验方法.可加工性的测定.第1部分:触变性泥浆流量的试验 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 1: Test for flow of thixotropic mortars; German version EN 13395-1:2002) |
| DIN EN 13395-2-2002 |
混凝土构件维修和保护用产品和系统.试验方法.可加工性的测定.第2部分:薄泥浆或泥浆流量的试验 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 2: Test for flow of grout or mortar; German version EN 13395-2:2002) |
| DIN EN 13395-3-2002 |
混凝土构件维修和保护用产品和系统.试验方法.可加工性的测定.第3部分:备用混凝土流量的试验 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 3: Test for flow of repair concrete; German version EN 13395-3:2002) |
| DIN EN 13395-4-2002 |
混凝土构件维修和保护用产品和系统.试验方法.可加工性的测定.第4部分:备用泥浆高空的应用 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 4: Application of repair mortar overhead; German version EN 13395-4:2002) |
| DIN EN 13396-2004 |
混凝土结构的防护和修理用产品和系统.试验方法.氯离子浸入测量 |
|
| DIN EN 13397-2002 |
工业用阀门.金属材料制造的隔膜阀门 |
(Industrial valves - Diaphragm valves made of metallic materials; German version EN 13397:2001) |
| DIN EN 13398-2004 |
沥青和沥青粘合剂.改性沥青弹性复原的测定 |
|
| DIN EN 13399-2004 |
沥青和沥青粘合剂.改性沥青存储稳定性的测定 |
|
| DIN EN 134-1998 |
呼吸防护器.零件名称 |
(Respiratory protective devices - Nomenclature of components; German version EN 134:1998) |
| DIN EN 1340-2003 |
混凝土路边石块.要求和试验方法 |
(Concrete kerb units; Requirements and test methods; German version EN 1340:2003) |
| DIN EN 13400-2002 |
鞋靴.样品和试样的取样部位、准备和老化耐久性 |
(Footwear - Sampling location, preparation und duration of conditioning of samples and test pieces; German version EN 13400:2001) |
| DIN EN 134000-1995 |
总规范:可调电容器(结构认证和功能认证) |
(Generic specification: Variable capacitors (Qualification approval and capability approval); German version EN 134000:1994) |
| DIN EN 13401-1999 |
食品和动物饲料的微生物学.产气荚膜梭状芽胞杆菌计数用水平法.菌落计数法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for enumeration of Clostridium perfringens - Colony-count technique (ISO 7937:1997, modified); German version EN 13401:1999) |
| DIN EN 13402-1-2001 |
服装尺寸的名称与符号.第1部分:术语、定义和人体测量过程 |
(Size designation of clothes - Part 1: Terms, definitions and body measurement procedure (ISO 3635:1981, modified); German version EN 13402-1:2001) |
| DIN EN 13402-2-2002 |
服装尺寸的名称与符号.第2部分:主要和次要尺寸 |
(Size designation of clothes - Part 2: Primary and secondary dimensions; German version EN 13402-2:2002) |
| DIN EN 13402-3-2005 |
服装型号的名称与符号.第3部分:测量方法和间隔期 |
|
| DIN EN 13403-2003 |
建筑物通风.非金属管.绝缘制管板材制成的管道 |
(Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards; German version EN 13403:2003) |
| DIN EN 13405-2003 |
表面活性剂.用高效液相色谱法测定线性烷基苯中二烃基萘满的含量 |
(Surface active agents - Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC); German version EN 13405:2002) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com