标准号 |
中文名称 |
英文名称 |
DIN 65169-1986 |
航空和航天.硬焊和高温钎焊结构.设计原则 |
(Aerospace; brazed and high-temperature brazed components; directions for design) |
DIN 65170-1997 |
航空和航天.硬焊及高温钎焊的金属结构构件.交货技术条件 |
(Aerospace - Brazed and high-temperature brazed metallic components - Technical specifications) |
DIN 65171-1984 |
航空和航天.熔焊装置和附加装备的验收.导向精度及运动精度 |
(Aerospace; acceptance testing of fusion welding jigs; and auxiliary equipment accuracy of control and movement) |
DIN 65174-1991 |
航空和航天.钛和钛合金圆棒材.尺寸.质量 |
(Aerospace; round bars of titanium and titanium alloys; dimensions, masses) |
DIN 65176-1987 |
航空和航天.管道的连接.结构.成品 |
(Aerospace; lacing of tube assemblies; design, manufacture) |
DIN 65177-1986 |
航空和航天.钛合金制MJ螺纹的六角头膨胀螺钉.温度315℃以下.额定抗拉强度1100MPa |
(Aerospace; hexagon bolts with waisted shank and MJ thread, titanium alloy, nominal tensile strength 1100 MPa, for temperature up to 315 C) |
DIN 65178-1-1985 |
航空和航天.液态或气态介质的管道设计和安装.概述和概念 |
(Aerospace; configuration and installation of fluid pipelines; survey and definitions) |
DIN 65178-2-1985 |
航空和航天.液态或气态介质的管道设计和安装.管道.结构 |
(Aerospace; configuration and installation of fluid pipelines; tube assemblies, design) |
DIN 65178-3-1985 |
航空和航天.液态或气态介质的管道设计和安装.管道.制造 |
(Aerospace; configuration and installation of fluid pipelines; tube assemblies, manufacture) |
DIN 65178-6-1987 |
航空和航天.液态或气态质用管道的设计和制造.软管管道.成品 |
(Aerospace; configuration and design of fluid pipelines; hose assemblies, manufacture) |
DIN 65179-1993 |
航空和航天.钛合金.短螺纹.额定抗拉强度1100MPa.温度315℃以下具有筋状翼形十字槽及MJ螺纹的埋头配合螺栓 |
(Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
DIN 6518-1-1989 |
凹形直柄四分之一圆成型铣刀.尺寸 |
(Corner rounding concave milling cutters with parallel shank; dimensions) |
DIN 6518-2-1990 |
凹形直柄四分之一圆成型铣刀.交货技术条件 |
(Corner rounding concave milling cutters with parallel shank; technical delivery conditions) |
DIN 65180-1986 |
航空和航天.带背面可松开接点中密度和高密度圆形电器接件.安装指南 |
(Aerospace; electrical circular connectors, medium and high density, rear release contacts; assembly procedures) |
DIN 65181-1989 |
航空和航天.导电层表面电阻的测量 |
(Aerospace; measurement of electrical surface resistance of conductive layers) |
DIN 65183-1988 |
航空和航天.有机涂层耐雨水侵蚀时间的测量 |
(Aerospace; rain testing of organic coatings for the determination of the resistance to erosion) |
DIN 65184-1993 |
航空和航天.碳纤维.高强度碳纤维素长丝纱.尺寸.质量 |
(Aerospace; carbon fibres; high performance carbon fibre filament yarns; dimensions, masses) |
DIN 65185-1-1993 |
航空和航天.紧固零件.结构和非结构用旋转紧固零件.交货技术条件 |
(Aerospace; fasteners; rotary fasteners for structural and non-structural applications; technical specification) |
DIN 65186-1990 |
航空和航天.用薄板和带材造型的铝合塑性合金型材.交货的技术条件.不适用于新结构 |
(Aerospace; wrought aluminium alloy sheet and strip shaped profiles (sections); technical specification; inactive for new design) |
DIN 65187-1986 |
航空和航天.铝合金制带通孔的复合材料用嵌件 |
(Aerospace; inserts for composite materials, with clearance hole, aluminium alloy) |
DIN 65188-1986 |
航空和航天.铝合金制复合材料用.带MJ螺纹.小结构封闭式.螺钉锁紧嵌件 |
(Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy) |
DIN 65189-1986 |
航空和航天.铝合金制带通孔的复合材料用.带MJ螺纹.开口式.螺钉锁紧接头 |
(Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, aluminium alloy) |
DIN 65190-1986 |
航空和航天.铝合金制带通孔的复合材料用.带MJ螺纹.封闭式.螺钉锁紧接头 |
(Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, aluminium alloy) |
DIN 65191-2002 |
航空航天.耐腐蚀钢制复合材料用带MJ螺纹的活动螺纹件和螺钉锁紧接头 |
(Aerospace - Inserts for composite materials with MJ thread, threaded part floating and screw-locking, corrosion-resisting steel) |
DIN 65194-1986 |
航空和航天.圆形电气接插件用盲塞 |
(Aerospace; sealing plugs for electrical circular connectors) |
DIN 65196-1987 |
航空和航天.园形电气插接件用防松垫圈 |
(Aerospace; lockwasher for electrical circular connectors) |
DIN 65197-1989 |
航空和航天.作为螺钉预制材料的钛合金制圆棒料及线材.尺寸.质量 |
(Aerospace; titanium alloy round bars and wire for screw stock; dimensions, masses) |
DIN 65202-1999 |
航空和航天.弹性体O型圈.尺寸 |
(Aerospace series - Elastomeric O-rings - Dimensions) |
DIN 65203-2001 |
航空和航天.弹性体O型密封圈.技术规范 |
(Aerospace series - Elastomeric O-rings - Technical specification) |
DIN 65207-1987 |
航空和航天.铝塑性合金薄板型材的公差 |
(Aerospace; tolerances for wrougth aluminium alloy folded profiles (sections)) |
DIN 65209-2001 |
航空航天系统.沉头垫圈 |
(Aerospace series - Washers, countersunk) |
DIN 65210-1-1987 |
航空和航天.额定压力210巴以下的软管管道.软管交货技术条件 |
(Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hoses) |
DIN 65210-2-1987 |
航空和航天.额定压力210巴以下的软管管道.软管旋紧螺栓连接件的交货技术条件 |
(Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hose fittings) |
DIN 65210-3-1987 |
航空和航天.额定压力210巴以下的软管管道.交货技术条件.成套软管管道 |
(Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for complete hose assemblies) |
DIN 65211-1-1987 |
航空和航天.额定压力210巴的软管管道.软管交货技术条件 |
(Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hoses) |
DIN 65211-2-1987 |
航空和航天.额定压力210巴的软管管道.软管旋紧螺栓的交货技术条件 |
(Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hose fittings) |
DIN 65211-3-1987 |
航空和航天.额定压力210巴的软管管道.成套的软管管道交货技术条件 |
(Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for complete hose assemblies) |
DIN 65212-1988 |
航空和航天.低压用仪表软管.交货技术条件 |
(Aerospace; instrumentation low pressure hoses; technical specification) |
DIN 65213-1988 |
航空和航天.软管公称压力为35巴以下套管软管.交货技术条件 |
(Aerospace; hoses for sleeve attachment for nominal pressures up to 35 bar; technical specification) |
DIN 65220-2002 |
航空航天.带MJ螺纹自锁螺母的铆接螺母板.螺母间距固定或可选择.铝制板.等级1100MPa/120℃ |
(Aerospace - Gang channel nut assembly, with self-locking nuts, with MJ thread, nut spacing fixed or optional, channel in aluminium; Classification: 1100 MPa/120 鳦) |
DIN 65221-1989 |
航空和航天.弹性软木板.交货技术条件.不适用于新式结构 |
(Aerospace; sheets from rubber-cork; technical specification) |
DIN 65227-1992 |
航空和航天.手持式铣具用导套.复位:2.5mm |
(Aerospace; workshop facilities; guide bushes for hand milling machines, clearance 2,5 mm) |
DIN 65228-1986 |
航空和航天;钎焊工考试.金属构件的硬钎焊 |
(Aerospace; examination of brazers; brazing of metallic parts) |
DIN 65228-2005 |
航空航天.钎焊工能力鉴定试验.金属件钎焊 |
|
DIN 65229-1979 |
航空航天.密封垫板.技术规范 |
(Aerospace; gaskets sheets, technical specification) |
DIN 65230-1988 |
航空和航天.马氏体硬化不锈钢的阳极抛光.代号2600 |
(Aerospace; anodic polishing of maraging stainless steels; code number 2600) |
DIN 65233-1986 |
航空和航天.电阻点焊机和滚缝焊机的验收 |
(Aerospace; acceptance test of resistance spot and roller seam welding machines) |
DIN 65236-1988 |
航空和航天.钢丝.镍和钴合金.交货技术条件 |
(Aerospace; steel, nickel- and cobalt-alloy wire; technical specification) |
DIN 65237-1996 |
航空和航天.双层钢活塞节轴承.交货技术条件.不适用于新结构 |
(Aerospace - Spherical plain bearings, steel on steel - Technical specification; inactive for new design) |
DIN 65238-2002 |
航空航天.自锁、不浮动、钢制角凸缘、带MJ螺纹、深沉孔的铆接螺母.等级:1100MPa/235℃ |
(Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, steel; Classification: 1100 MPa/235 鳦) |
DIN 65239-1987 |
航空航天.自锁、不浮动、角凸缘、耐腐蚀钢制带MJ螺纹的深沉孔的铆接螺母.等级:1100MPa/315℃/425℃ |
(Aerospace; anchor nuts with MJ-thread, deep counterbore, self-locking, non-floating, corner, corrosion-resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
DIN 65240-2002 |
航空航天.等级为:1100MPa/235℃的带沉孔及MJ螺纹的钢制双耳游动托板自锁螺纹 |
(Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, two lug, steel; Classification: 1100 MPa/235 鳦) |
DIN 65242-1987 |
航空航天.自锁、浮动、双侧凸缘、耐腐蚀钢制带MJ螺纹的深沉孔的铆接螺母.等级:1100MPa/315℃/425℃ |
(Aerospace; anchor nuts with MJ-thread, deep counterbore, self-locking, floating, two lug, corrosion-resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
DIN 65243-2002 |
航空航天.等级为:1100MPa/235℃的带沉孔及MJ螺纹的钢制单耳游动托板自锁螺纹 |
(Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, steel; Classification: 1100 MPa/235 鳦) |
DIN 65244-1987 |
航空航天.自锁、浮动、单凸缘、耐腐蚀钢制带圆柱形沉孔的MJ螺纹的铆接螺母.等级:1100MPa/315摄氏度/425摄氏 |
(Aerospace; anchor nuts with MJ-thread, deep counterbore, self-locking, floating, single lug, corrosion-resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
DIN 65245-1984 |
航空和宇航.自锁.钢制.带MJ螺纹的六角螺母.等级:1100MPa/120DEGREESC |
(Aerospace; nuts, hexagon, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 C) |
DIN 65246-1984 |
航空和宇航.自锁.钢制.带MJ螺纹的冠状螺母.等级:1100MPa/120摄氏度 |
(Aerospace; nuts, hexagon, slotted/castellated, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 C) |
DIN 65247-1989 |
航空和航天.耐腐蚀钢制MJ螺纹平头冠状螺母.等级:110MPa/425摄氏度 |
(Aerospace; nuts, hexagon, slotted/castellated, thin, with MJ thread, corrosion-resisting steel, class: 1100 MPa/425 C) |
DIN 65249-1987 |
航空和航天.具有MJ螺纹.自锁定.铜-塑性合金制六角螺母.等级:400MPa/120℃ |
(Aerospace; nuts, hexagon, with MJ thread, self-locking, in copper-alloy; class: 400 MPa/120 C) |
DIN 65250-1989 |
航空和航天.钛及钛合金制无缝内压力管.尺寸.质量 |
(Aerospace; seamless internal pressure tubes in titanium and titanium alloys; dimensions, masses) |
DIN 65252-1999 |
航空和航天.混合网孔形弹性体泡沫塑料.半成品和模制品.交货的技术条件 |
(Aerospace series - Cellular elastomeric materials, open and closed cells - Semi-finished products and moulded parts; technical specification) |
DIN 65253-2002 |
带内细齿的螺钉用的L形扳手 |
(L-wrench for screws with internal serration) |
DIN 65254-2002 |
六角嵌入式旋具头.带内细齿的螺钉 |
(Hexagon insert bits - For screws with internal serrations) |
DIN 65258-1989 |
航空和航天.100°沉头米制系列铝和铝合金铆钉 |
(Aerospace; rivets, 100 countersunk head, aluminium and aluminium alloys; metric series) |
DIN 65259-1989 |
航空和航天.100°沉头米制系列铝和铝合金小头铆钉 |
(Aerospace; rivets, 100 countersunk head, reduced, aluminium and aluminium alloys; metric series) |
DIN 65260-1989 |
航空和航天.米制系列铝和铝合金通用铆钉 |
(Aerospace; rivets, universal head, aluminium and aluminium alloys; metric series) |
DIN 65262-1-1996 |
航空和航天.密封材料.第1部分:多硫化物-聚合物基.交货技术条件 |
(Aerospace - Sealing compounds - Part 1: Polysulphide polymer base; technical specification) |
DIN 65262-2-1998 |
航空和航天.密封材料.第2部分:偏氟乙烯-六氟丙烯基.交货技术条件 |
(Aerospace series - Sealing compounds - Part 2: Vinylidene fluoride and hexafluoropropylene base; technical specification) |
DIN 65262-3-1996 |
航空和航天.密封材料.第3部分:硅橡胶基.交货技术条件 |
(Aerospace series - Sealing compounds - Part 3: Silcone-rubber base; technical specification) |
DIN 65265-1998 |
航空和航天.钛合金制螺纹接近顶部的MJ螺纹六角螺钉.温度315℃及其以下用额定抗拉强度1100MPa |
(Aerospace - Screws, hexagon bolts with MJ thread, threaded approximately to head, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
DIN 65266-1980 |
航空和航天.复盖用织物.交货的技术条件 |
(Aerospace; fabric covering, technical specification) |
DIN 65267-1992 |
航空和航天.带MJ螺纹的六角螺钉.螺纹接近于头部.温度235℃以下额定抗拉强度900MPa |
(Aerospace; screws, hexagon, with MJ thread, threaded approximately to head, steel, nominal tensile strength 900 MPa, for temperatures up to 235 C) |
DIN 65268-1986 |
航空和航天.MJ螺纹的六角螺钉.短螺纹.钛合金制.温度达315°C额定抗拉强度1100MPa |
(Aerospace; bolts hexagon with MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
DIN 65269-1987 |
航空和航天.具有筋状翼形十字槽及MJ螺纹的埋头配合螺栓..钢制短螺纹.温度235以下额定抗拉强度900MPa |
(Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 C) |
DIN 6527-2002 |
实心硬质合金带槽直柄端铣刀.尺寸 |
(Solid hardmetal end mills with stepped parallel shank - Dimensions) |
DIN 65270-1992 |
航空航天.带耐蚀钢制自锁定MJ螺纹的冠状螺母.等级:1100MPQ/120℃ |
(Aerospace; nuts, hexagon, slotted/castellated, with MJ thread self-locking, corrosion-resisting steel; classification: 1100 MPa/120 鳦) |
DIN 65271-2002 |
航空航天系列.弹性半成品和部件.技术规范 |
(Aerospace series - Elastomeric semi-finished products and parts - Technical specification) |
DIN 6528-2002 |
实心硬质合金不带槽直柄端铣刀.尺寸 |
(Solid hardmetal end mills with continuous parallel shank - Dimensions) |
DIN 65281-1992 |
航空航天.带耐蚀钢制MJ螺纹的扁六角螺母.等级:1100MPQ/315℃/425℃ |
(Aerospace; nuts, hexagon, thin, with MJ thread, corrosion resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
DIN 65281-2005 |
航空航天系列.MJ螺纹、耐腐蚀钢制薄型六角螺母.等级:1100MPa/315℃/425℃ |
|
DIN 65284-1987 |
航空和航天.具有筋状翼形十字槽及MJ螺纹的.螺纹接近于头部.抗腐蚀钢制埋头配合螺栓.抗拉强度1100MPa.温度可 |
(Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 C) |
DIN 65285-1987 |
航空和航天.具有筋状翼形十字槽和MJ螺纹的.短螺纹.耐腐蚀钢制埋头螺栓.额定抗拉强度1100MPa.温度可达425℃ |
(Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 C) |
DIN 65286-1987 |
航空和航天.具有筋状翼形十字槽和MJ螺纹的.短螺纹.钢制埋头螺栓.埋头螺栓.额定抗拉强度900MPa.温度可达235 |
(Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 900 MPa, for temperatures up to 235 c) |
DIN 65289-1987 |
航空和航天.具有筋状翼形十字槽和MJ螺纹的.短螺纹.钛合金钢制埋头螺栓.埋头螺栓.额定抗拉强度1100MPa.温度 |
(Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
DIN 6529-1992 |
整体硬质合金直柄立铣刀.交货技术条件 |
(Solid hardmetall end mills with parallel shank; technical delivery conditions) |
DIN 65298-1988 |
航空和航天.旋转轴用带耐用润滑的滚针轴承万向节.万向轴.连接尺寸.负荷.质量 |
(Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; single joints; connection dimensions, loads, masses) |
DIN 65299-1988 |
航空和航天.旋转轴用带耐用润滑的滚针轴承万向节.双万向轴.连接尺寸.负荷.质量 |
(Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; double joints; connection dimensions, loads masses) |
DIN 653-1986 |
滚花扁型螺钉 |
(Knurled thin thumb screws) |
DIN 65300-1988 |
航空和航天.旋转轴用带耐用润滑的滚针轴承万向节.交货技术条件 |
(Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; technical specification) |
DIN 65306-1986 |
航空和航天.不锈钢制带通孔的复合材料用嵌件 |
(Aerospace; inserts for composite materials, with clearance hole, corrosion resisting steel) |
DIN 65307-1986 |
航空航天.带MJ螺纹的小结构密封的螺钉锁紧的不锈钢制复合材料用嵌件 |
(Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, corrosion-resisting steel) |
DIN 65308-1986 |
航空航天.带MJ螺纹的开口式的螺钉锁紧的不锈钢制复合材料用嵌件 |
(Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, corrosion-resisting steel) |
DIN 65309-1986 |
航空航天.密封式螺钉锁紧的不锈钢制复合材料用嵌件 |
(Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, corrosion-resisting steel) |
DIN 65313-1987 |
航空和航天.具有筋状翼形十字槽和MJ螺纹.螺纹接近头部.耐腐蚀钢制的平头螺栓.额定抗拉强度1100MPa.温度425 |
(Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 C) |
DIN 65314-1998 |
航空和航天.带筋状翼形十字槽,MJ螺纹及短螺纹的钢制沉头配合螺钉.温度235℃及其以下用额定抗拉强度11100MPa |
(Aerospace - Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, steel - Nominale tensile strength 1100 MPa, for temperatures up to 235 C) |
DIN 65316-1993 |
航空和航天.耐蚀钢制.短螺纹.额定抗拉强度1100MPa.温度425℃以下具有筋状翼形十字槽及MJ螺纹的埋头配合螺栓 |
(Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 C) |
DIN 65317-1987 |
航空和航天.具有筋状翼形十字槽和MJ螺纹.短螺纹.钢制的埋头螺栓.额定抗拉强度1100MPa.温度235℃以下 |
(Aerospace; countersunk head screws with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 C) |
DIN 65318-1987 |
航空和航天.具有筋状翼形十字槽和MJ螺纹.短螺纹.钢制平头螺栓.额定抗拉强度1100MPa.温度235℃以下 |
(Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ-thread, steel; nominal tensile strength 110 MPa, for temperatures up to 235 C) |
DIN 65319-1987 |
航空和航天.具有筋状翼形十字槽和MJ螺纹.短螺纹.耐腐蚀钢制平头配合螺栓.额定抗拉强度1100MPa.温度425℃以 |
(Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 C) |
DIN 65320-1993 |
航空和航天.钢制.短螺纹.额定抗拉强度1100MPa.温度235℃以下具有筋状翼形十字槽及MJ螺纹的埋头配合螺栓 |
(Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 C) |
DIN 65321-1989 |
航空和航天.聚丙烯玻璃盘.防护板和模压件.交货技术要求 |
(Aerospace; acrylic sheets, panes and moulded parts; technical specification) |
DIN 65324-1993 |
航空和航天.钛合金.短螺纹.额定抗拉强度1100MPa.温度315℃以下具有筋状翼形十字槽及MJ螺纹的埋头配合螺栓 |
(Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
DIN 65330-1987 |
航空和航天.具有MJ螺纹.短螺纹钢制六角螺栓.额定抗拉强度1100MPa.温度可达235℃ |
(Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 C) |
DIN 65338-1993 |
航空和航天.钛合金.台阶式短螺纹.额定抗拉强度1100MPa.温度315℃以下具有MJ螺纹的六角头配合螺栓 |
(Aerospace; hexagon bolts, close tolerance, with short-length MJ thread, shoulder, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
DIN 65339-1998 |
航空和航天.带MJ螺纹,短螺纹,耐腐蚀钢制六角配合螺钉.温度425℃及其以下用额定抗拉强度1100MPa |
(Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, corrosion-resisting steel - Nominal tensile strength 1100 MPa, for temperatures up to 425 C) |
DIN 65342-1987 |
航空航天.自锁、双耳、缩径、耐腐蚀钢制带深沉孔的MJ螺纹系紧螺母.等级:1100MPa/315℃/425℃ |
(Aerospace; anchor nuts with MJ-thread, deep counterbore, self-locking, two lug, reduced, corrosion-resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
DIN 65342-2005 |
航空航天系列.耐腐蚀钢制自锁紧带深沉孔、双耳、缩径、MJ螺纹地脚螺母.等级:1100MPa/315℃/425℃ |
|
DIN 65343-2002 |
航空航天.等级为:1100MPa/235℃的带MJ螺纹的钢制铆接螺母,圆柱形划孔,自锁紧,两侧缩短的凸缘 |
(Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, steel; Classification: 1100 MPa/235 鳦) |
DIN 65344-1987 |
航空航天.带圆柱形深沉孔的具有MJ螺纹的铆接螺母.自锁、双耳、耐腐蚀钢制.等级:1100MPa/315℃/425℃ |
(Aerospace; anchor nuts with MJ-thread, deep counterbore, self-locking, two lug, corrosion-resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
DIN 65344-2005 |
航空航天.耐腐蚀钢制带深沉孔、双耳、MJ螺纹自锁紧地脚螺母.等级:1100MPa/315℃/425℃ |
|
DIN 65345-1986 |
航空航天.带圆柱形深沉孔的具有MJ螺纹的铆接螺母.自锁、双耳、钢制.等级:1100MPa/235℃ |
(Aerospace; anchor nuts with MJ thread, deep counterbore, self-locking, two lug, steel; classification: 1100 MPa/235 鳦) |
DIN 65346-1987 |
航空航天.带圆柱形深沉孔的具有MJ螺纹的铆接螺母.单耳、耐腐蚀钢制.等级:1100MPa/315℃/425℃ |
(Aerospace; anchor nuts with MJ-thread, deep counterbore, self-locking, single lug, corrosions-resisting steel; classification: 1100 MPa/315 鳦/425 鳦) |
DIN 65347-2002 |
航空航天.等级为:1100MPa/235℃的带沉孔及MJ螺纹的钢制单耳的游动托板自锁螺纹 |
(Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, steel; Classification: 1100 MPa/235 鳦) |
DIN 65348-1988 |
航空和航天.钛合金无缝内承压管.交货技术条件 |
(Aerospace; seamles internal pressure tubes in titanium alloys; technical specification) |
DIN 65349-2001 |
航空航天.米制螺纹的螺母和相关螺钉部件的锁扭矩试验.试验方法 |
(Aerospace - Testing of locking torques for nuts and related threaded parts, with metric screw thread - Test methods) |
DIN 6535-1992 |
硬质合金麻花钻和立铣刀用圆柱柄.尺寸 |
(Parallel shanks for hardmetal twist drills and end mills; dimensions) |
DIN 65350-1-1988 |
航空和航天.铆接.全铆钉用铆接工具铆接的结构件的易操作性 |
(Aerospace; riveting; assembly accessibility of riveting tools for solid rivets) |
DIN 65350-2-1988 |
航空和航天.铆接.盲铆钉用铆接工具铆接的的易操作性 |
(Aerospace; riveting; assembly accessibility of riveting tools for blind rivets) |
DIN 65350-3-1988 |
航空和航天.铆接.螺栓铆钉用铆接工具铆接的结构件的易操作性 |
(Aerospace; riveting; assembly accessibility of riveting tools for threaded blind rivets) |
DIN 65350-4-1988 |
航空和航天.铆接.配合铆钉用铆接工具铆接的结构件的易操作性 |
(Aerospace; riveting; assembly accessibility of riveting tools for close tolerance rivets) |