标准号 |
中文名称 |
英文名称 |
| DIN 8593-4-2003 |
连接加工工艺.第4部分:非晶材料的加工连接.分类、细分类、术语和定义 |
(Manufacturing processes joining - Part 4: Joining by processing of amorphous materials; Classification, subdivision, terms and definitions) |
| DIN 8593-5-2003 |
连接加工工艺.第5部分:变形结合.分类、细分类、术语和定义 |
(Manufacturing processes joining - Part 5: Joining by forming processes; Classification, subdivision, terms and definitions) |
| DIN 8593-6-2003 |
连接加工工艺.第6部分:焊接.分类、细分类、术语和定义 |
(Manufacturing processes joining - Part 6: Joining by welding; Classification, subdivision, terms and definitions) |
| DIN 8593-7-2003 |
连接加工工艺.第7部分:钎焊或铜焊接合.分类、细分类、术语和定义 |
(Manufacturing processes joining - Part 7: Joining by soldering or brazing; Classification, subdivision, terms and definitions) |
| DIN 8593-8-2003 |
连接加工工艺.第8部分:粘接.分类、细分类、术语和定义 |
(Manufacturing processes joining - Part 8: Joining by means of adhesives; Classification, subdivision, terms and definitions) |
| DIN 86001-1997 |
船舶用管道.压力等级,检验 |
(Pipelines on ships - Pressure ratings, tests) |
| DIN 86009-1986 |
船舶排气管.钢管 |
(Exhaust gas lines on ships; steel tubes) |
| DIN 86012-1984 |
船舶用无增塑剂的聚乙烯粘接管道.要求.粘接尺寸.构件 |
(Pipelines of unplasticized polyvinyl chloride (PVC-U) on ships, with cold-welded joints; requirements, dimensions for bonding, summary of components) |
| DIN 86013-1989 |
船舶管道用无增塑剂的聚氯乙烯管 |
(Pipes of unplasticized polyvinyl chloride (PVC-U) for pipelines on ships) |
| DIN 86014-1989 |
硬聚氯乙烯管用套管 |
(Bulkhead fittings for pipes of unplasticized polyvinyl chloride (PVC-U)) |
| DIN 86015-1991 |
船舶用粘接的无增塑剂的氯乙烯(PVC-U)管.应用.加工.敷设 |
(Pipelines of unplasticized polyvinyl chloride (PVC-U) on ships, with cold-welded joints; application, processing, installation) |
| DIN 86016-1991 |
船舶硬聚氯乙烯管道用钢管夹 |
(Pipe brackets of steel for ships pipelines of unplasticized polyvinyl cloride (PVC-U)) |
| DIN 86018-2002 |
焊接的CuNi10Fe1.6Mn管.尺寸 |
(Welded tubes made of CuNi10Fe1,6Mn for pipes - Dimensions) |
| DIN 86019-1997 |
管道用CuNi10Fe1,6Mn制无缝管.尺寸 |
(Seamless tubes made of CuNi10Fe1,6Mn for pipes - Dimensions) |
| DIN 86021-2002 |
铜合金铸造法兰.公称压力为10、16、25的法兰设计原理 |
(Cast flanges of copper alloys - Principles of design for nominal pressure 10, 16, 25) |
| DIN 86025-1-1997 |
带托架的固夹件.第1部分:不带插件A型和带插件的B型 |
(Fastening clamps with bracket - Part 1: Type A without insert, type B with insert) |
| DIN 86025-2-1997 |
带托架的固夹件.第2部分:不带插件的C型和带插件的D型 |
(Fastening clamps with bracket - Part 2: Type C without insert, type D with insert) |
| DIN 86025-3-1997 |
带托架的固夹件.第3部分:插件 |
(Fastening clamps with bracket - Part 3: Insert) |
| DIN 86026-1-1998 |
船舶用管夹.第1部分:DN8至DN1400管用管夹 |
(Pipe clamps for shipboard use - Part 1: Pipe clamps for pipes DN 8 to DN 1400) |
| DIN 86026-2-1998 |
船舶用管夹.第2部分:管夹用衬垫 |
(Pipe clamps for shipboard use - Part 2: Inserts for pipe clamps) |
| DIN 86027-1998 |
船舶用管夹.管夹持装置 |
(Pipe clamps for shipboard use - Pipe holder) |
| DIN 86028-1997 |
CuNi10Fe1.6Mn制预焊组件.交货技术要求 |
(Welding necks of CuNi10Fe1,6Mn - Technical specifications) |
| DIN 86029-1987 |
带套口的焊接法兰.公称压力10 |
(Hubbed slip-on flanges for welding; nominal pressure 10) |
| DIN 86030-1987 |
带套口的焊接法兰.公称压力16 |
(Hubbed slip-on flanges for welding; nominal pressure 16) |
| DIN 86033-1980 |
铜和精炼铜合金管道的焊接法兰.公称压力10 |
(Soldered flanges for tubes of copper and copper alloys, nominal pressure 10) |
| DIN 86036-1984 |
铜和精炼铜合金管道的搭接法兰和钎焊凸肩.公称压力10 |
(Lapped flanges and brazing collar for tubes of copper and copper alloys; nominal pressure 10) |
| DIN 86037-1-1995 |
铜镍合金管用搭接法兰和预焊凸肩.第1部分:组装 |
(Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 1: Assembly) |
| DIN 86037-2-1995 |
精炼铜镍合金管道的搭接法兰和焊接凸肩.公称压力10,16,25.第2部分:焊接凸肩 |
(Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 2: Welding necks) |
| DIN 86037-3-1995 |
精炼铜镍合金管道的搭接法兰和焊接凸肩.公称压力10、16、25.搭接法兰 |
(Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 3: Loose flanges) |
| DIN 86038-1-2000 |
船只及造船技术.松动法兰和超轻型搭接管端.第1部分:搭接管端DN32-DN125 |
(Ships and marine technology - Loose flanges and lapped pipe ends extra light duty - Part 1: Lapped pipe ends DN 32 to DN 125) |
| DIN 86038-2-2000 |
船只及造船技术.松动法兰和和超轻型管端.第2部分:松动法兰DN32-DN50(最大到PN25)和松动法兰DN65-DN125(最大 |
(Ships and marine technology - Loose flanges and lapped pipe ends extra light duty - Part 2: Loose flanges DN 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10) |
| DIN 86038-3-2000 |
船只及造船技术.松动法兰和和超轻型搭接管端.第3部分:只用于焊接DN32-DN125的搭接管端 |
(Ships and marine technology - Loose flanges and lapped pipe ends extra light duty - Part 3: Lapped pipe ends for but welding DN 32 to DN 125) |
| DIN 86039-2000 |
船只及造船技术.超轻型法兰连接件DN32-DN50(最大到PN25)和DN65-DN125(最大到PN10)用的平衬垫 |
(Ships and marine technology - Flat gaskets for flange connections extra light duty DN 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10) |
| DIN 86040-2000 |
船只及造船技术.超轻型焊接法兰 |
(Ships and marine technology - Welding flanges extra light duty) |
| DIN 86041-1-1996 |
焊接法兰.第1部分:容器和海水箱.公称压力10和16 |
(Welding Flanges - Part 1: Tanks and sea boxes, nominal pressure 10 and 16) |
| DIN 86041-2-1996 |
焊接法兰.第2部分:舷外接头.公称压力10,16,40,160 |
(Welding flanges - Part 2: Outboard connections, nominal pressure 10, 16, 40) |
| DIN 86042-1978 |
盲孔片(填料盒盖法兰).按公称压力10和16的连接尺寸 |
(Dummy Hole Plates (Spectacle Flanges); Mating Dimensions according to Nominal Pressure 10 and 16) |
| DIN 86044-1980 |
船舶排气管道.法兰盘 |
(Exhaust gas lines on ships; flanges) |
| DIN 8605-1976 |
机床.高精度车床.旋转直径至500mm.车床中心距至1500mm.验收条件 |
(Machine Tools; Lathes of High Accuracy Swing up to 500 mm, Turning Length up to 1500 mm, Acceptance Conditions) |
| DIN 86056-2001 |
钢管和铜或铜合金管用、带锁紧螺母和密封圈的引入管套筒 |
(Conduits pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys) |
| DIN 86057-1976 |
直通管用焊接法兰 |
(Welding on flanges (collars) for bulkhead fittings for pipes) |
| DIN 86059-1976 |
钢管用带法兰的直通套管.公称压力10 |
(Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10) |
| DIN 8606-1976 |
机床.标准精度车床.旋转直径至800mm.验收条件 |
(Machine Tools; Lathes of Normal Accuracy; Swing up to 800 mm; Acceptance Conditions) |
| DIN 86061-1976 |
钢管用带管法兰的连接管.公称压力10 |
(Connecting sockets with pipe flange, for steel tubes, nominal pressure 10) |
| DIN 86064-1976 |
钢管用带管法兰和焊接法兰的连接管.公称压力10 |
(Connecting sockets with pipe flange and fixing collar, for steel tubes, nominal pressure 10) |
| DIN 86066-2002 |
止回阀用铸钢焊入式弯头.DN50至150,PN10的法兰接合 |
(Cast steel welding elbows for storm valves - DN 50 to 150, connecting dimensions according to PN 10) |
| DIN 8607-1976 |
机床.标准精度车床.旋转直径超过800至1600mm.验收条件 |
(Machine Tools; Lathes of Normal Accuracy, Swing above 800 up to 1600 mm; Acceptance Conditions) |
| DIN 86071-1992 |
法兰用带螺栓孔的平密封垫.公称压力6、10、16、25 |
(Full face gaskets for flanges; nominal pressures 6, 10, 16, 25) |
| DIN 86072-1992 |
船用排气管道.平密封垫 |
(Exhaust gas lines on ships; gaskets) |
| DIN 86076-1988 |
耐海水、耐油的弹性衬板.尺寸.要求.检验 |
(Elastomer sealing sheets, seawater resistant, oil resistant; dimensions, requirements, testing) |
| DIN 86080-2004 |
船舶和海上技术.造船的系统协调计划 |
|
| DIN 86086-1996 |
与铜镍合金管对焊的管件.交货技术要求 |
(Fittings for butt welding into copper-nickel-alloy pipelines - Technical specifications) |
| DIN 86087-1996 |
铜镍合金制管道焊接异型件.鞍形座 |
(Fittings for butt welding into copper-nickel-alloy pipelines - Saddle type connections) |
| DIN 86088-1996 |
铜镍合金制管道焊接异型件.三通 |
(Fittings for butt welding into wrought copper alloy pipelines - Tees) |
| DIN 86089-1996 |
铜镍合金制管道焊接异型件.锥形减径管 |
(Fittings for butt welding into copper-nickel-alloy pipelines - Concentric reducers) |
| DIN 8609-1-1979 |
机床.立式车床.验收条件.一般介绍 |
(Machine tools; vertical turning and boring lathes, acceptance conditions, general introduction) |
| DIN 8609-2-1979 |
机床.立式车床.单柱立式车床.验收条件 |
(Machine tools; vertical turning and boring lathes with one column, acceptance conditions) |
| DIN 8609-3-1979 |
机床.立式车床.双柱立式车床.验收条件 |
(Machine tools; vertical turning and boring lathes with two columns, acceptance conditions) |
| DIN 8609-4-1980 |
机床.立式车床.带活动支架和(或)活动柱的单柱立式车床.验收条件 |
(Machine tools; vertical turning and boring lathes with one column and movable base and/or movable column, acceptance) |
| DIN 86090-1996 |
铜镍合金制管道焊接异型件.管弯头 |
(Fittings for butt welding into copper-nickel-alloy pipelines - Elbows) |
| DIN 86100-1973 |
螺旋联管节、配件和管堵.船舶用产品一览表 |
(Tube fittings and screw plugs; summary of types for shipbuilding) |
| DIN 86103-1996 |
公制细螺纹和惠氏管螺纹的管接头用分岔接管 |
(Sockets for screwed ends with metric fine thread and Whitworth pipe thread) |
| DIN 8611-1-1976 |
机床.卧式单轴自动车床.验收条件 |
(Machine Tools; Horizontal Single-spindle Automatic Lathes; Acceptance Conditions) |
| DIN 8611-2-1976 |
机床.正面操作的卧式自动车床.验收条件 |
(Machine Tools; Horizontal Automatic Lathes; Front-loaded; Acceptance Conditions) |
| DIN 8611-3-1976 |
机床.卧式自动车床.纵向自动车床.验收条件 |
(Machine Tools; Horizontal Automatic Lathes; Swiss-Type Automatic Lathes; Acceptance Conditions) |
| DIN 86110-1988 |
船舶设槽箱管道.灌装量与压力平衡装置.测量管 |
(Ship service tank piping systems; filing and pressure equalizing equipment; sounding pipes) |
| DIN 86111-1986 |
充料管与探测管用焊接密封盖 |
(Welded-in deck screw caps for filling and sounding pipes) |
| DIN 86120-1990 |
测深管旋塞 |
(Sounding plugs) |
| DIN 86121-1984 |
螺帽.G1-G6管螺纹 |
(Screw caps; pipe thread G1 to G6) |
| DIN 86125-2001 |
船用管道.管和管道设备.梗概 |
(Pipelines for shipboard use - Pipes and pipeline equipment - Synopsis) |
| DIN 86126-2000 |
船用压合接头.米制螺纹24级接头.类型和尺寸 |
(Compression fittings for shipboard use - 24?fittings with metric thread - Types and dimensions) |
| DIN 86127-2000 |
船用压合接头.米制螺纹24级接头.技术规范 |
(Compression fittings for shipboard use - 24 fittings with metric thread - Technical specification) |
| DIN 86128-1-1997 |
管连接件.第1部分:交货技术条件 |
(Pipe couplings - Part 1: Technical specifications) |
| DIN 86128-1-2005 |
管连接件.第1部分:技术规范 |
|
| DIN 86128-2-1997 |
管连接件.第2部分:尺寸 |
(Pipe couplings - Part 2: Dimensions) |
| DIN 86128-2-2005 |
管连接件.第2部分:尺寸 |
|
| DIN 86129-1986 |
充料管和探测管用焊接带盖螺母的螺塞与平密封环 |
(Plug screws and flat sealing rings for welded-in screw caps for filling and sounding pipes) |
| DIN 8613 Bb.-1970 |
机床的验收条件.自动车削工件用卧式多轴自动车床.试验报告表格 |
(Acceptance Conditions for Machine Tools; Multi-spindle Automatic Lathes; Horizontal Type for Rotating Workpieces; Form for Test Results) |
| DIN 8613-1970 |
机床的验收条件.自动车削工件用卧式多轴自动车床 |
(Acceptance Conditions for Machine Tools; Multi-spindle Automatic Lathes; Horizontal Type for Rotating Workpieces) |
| DIN 8615-3-1979 |
机床.卧轴固定工作台铣床.验收条件 |
(Machine Tools; Milling Machines with Horizontal Spindle and Fixed Table; Acceptance Conditions) |
| DIN 8615-4-1979 |
机床.立轴固定工作台铣床.验收条件 |
(Machine Tools; Milling Machines with Vertical Spindle and Fixed Table; Acceptance Conditions) |
| DIN 86150-1996 |
管道用焊接套管 |
(Welding sockets for pipes) |
| DIN 86151-1996 |
船舶操作油箱管道.名称.定义.缩写.公式符号 |
(Ship operation tank pipework - Terms, definitions, symbols) |
| DIN 86161-1983 |
无增塑剂聚氯乙烯管用通过A型隔板的直通套管 |
(Bulkhead pieces leading through type A, divisions for pipes of unplasticized polyvinyl chloride (PVC-U)) |
| DIN 862-1988 |
游标卡尺.要求.检验 |
(Vernier callipers; requirements and testing) |
| DIN 8620-1-1978 |
机床.卧式镗铣床.验收条件.导则 |
(Machine Tools; Boring (Drilling) and Milling Machines with Horizontal Spindle; Acceptance Conditions, General Introduction) |
| DIN 8620-3-1980 |
机床.卧式带工作台和床身固定镗铣床.旋转工作台.验收条件 |
(Machine Tools; Boring and Millung Machines with Horizontal Spindle; Table-Type Machines; Rotary Tables; Acceptance Conditions) |
| DIN 86200-1989 |
消防和甲板洗刷设备.软管接头.管件.软管.附件.船用产品一览表 |
(Fire extinguishing and wash deck installation; hose couplings, armatures, hoses, accessories; summary of types for shipbuilding) |
| DIN 86201-2000 |
船上消防设施的国际海岸连接用连接件.公称压力16 |
(Fittings for international shore connection of fire extinguishing installations on ships - Nominal pressure 16) |
| DIN 86202-1989 |
船舶用铜锌合金公称压力16的C型压力软管接头 |
(Delivery fire hose coupling type C, PN 16; made of brass, for use on ships) |
| DIN 86203-1989 |
船舶用铜锌合金公称压力16的B型压力软管接头 |
(Delivery fire hose coupling type B, PN 16; made of brass, for use on ships) |
| DIN 86204-1993 |
船舶用铜锌合金额定压力16的C型整体软管接头 |
(Solid fire hose coupling type C, PN 16; made of brass, for use on ships) |
| DIN 86205-1993 |
船舶用铜锌合金额定压力16的B型整体软管接头 |
(Solid fire hose coupling type B, PN 16; made of brass for use on ships) |
| DIN 86206-1996 |
船舶用铜锌合金公称压力16的C型固定软管接头管帽 |
(Cap fire hose coupling type C, PN 16, made of brass for use on board ships) |
| DIN 86207-1996 |
船舶用铜锌合金公称压力16的B型固定软管接头管帽 |
(Cap fire hose coupling type B, PN 16, made of brass for use on board ships) |
| DIN 86211-1991 |
公称压力PN16.带C或B型联管件和带法兰连接件的消防软管连接阀 |
(Fire valves for PN 16, with fire hose couplings type C or B and with flange connection) |
| DIN 8625-1-1976 |
机床.可调整臂摇臂钻床.验收条件 |
(Machine Tools; Radial Drilling Machines with Adjustable Arm; Acceptance conditions) |
| DIN 86251-1998 |
造船用铸铁制带法兰的DN15至500的截止阀 |
(Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500) |
| DIN 86252-1998 |
造船用铸铁制可闭锁带法兰DN15至500的止回阀 |
(Non return valves for shipboard use, cutt off type, of cast iron, with flanges, DN 15 to 500) |
| DIN 86254-2000 |
船只及造船技术.超轻型截止阀DN32-DN125(PN10) |
(Ships and marine technology - Shut off valves extra light duty DN 32 to DN 125, PN 10) |
| DIN 86257-2000 |
船只及造船技术.超轻型截止型单向阀DN32-DN125(PN10) |
(Ships and marine technology - Non return valves cutt off type extra light duty DN 32 to DN 125, PN 10) |
| DIN 86258-2000 |
船只及造船技术.超轻型非截止型单向阀DN32-DN125(PN10) |
(Ships and marine technology - Non return valves non shutt off type extra light duty DN 32 to DN 125, PN 10) |
| DIN 86259-2000 |
船只及造船技术.超轻型法兰闸阀DN32-DN125(PN10) |
(Ships and marine technology - Flanged gate valves extra light duty DN 32 to DN 125, PN 10) |
| DIN 8626-1-1976 |
机床.立式钻床.箱式钻床.验收条件 |
(Machine Tools; Vertical Drilling Machines; Box Type Drilling Machines; Acceptance Conditions) |
| DIN 8626-2-1976 |
机床.立式钻床.柱式钻床.验收条件 |
(Machine Tools; Vertical Drilling Machines; Pillar Type Drilling Machines; Acceptance Conditions) |
| DIN 8626-3-1980 |
机床.立式钻床.工作台高度可调的单柱立式坐标钻床.验收条件 |
(Machine Tools; Vertical Drilling Machines; Single Column Coordinate Drilling Machines with Vertical Spindle and Knee of Variable Height; Acceptance Conditions) |
| DIN 8626-4-1980 |
机床.立式钻床.工作台高度固定的单柱立式坐标钻床.验收条件 |
(Machine Tools; Vertical Drilling Machines; Single Column Coordinate Drilling Machines with Vertical Spindle and Table of Fixed Height; Acceptance Conditions) |
| DIN 8626-5-1980 |
机床.立式钻床.工作台高度固定的双柱立式坐标钻床.验收条件 |
(Machine Tools; Vertical Drilling Machines; Double Column Coordinate Drilling Machines with Vertical Spindle and Table of Fixed Height; Acceptance Conditions) |
| DIN 86260-1998 |
造船用炮铜制带法兰DN15至500的截止阀 |
(Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500) |
| DIN 86261-1998 |
造船用炮铜制可闭锁带法兰DN15至500的止回阀 |
(Non return valves for shipboard use, cutt off type, of gun metall, with flanges, DN 15 to 500) |
| DIN 86263-2000 |
Y型,软密封,套节连接的船用直通阀.DN15-DN50,PN16 |
(Straight way valves for shipboard use - Y-patten, soft sealing, with socket connection - DN 15 to DN 50, PN 16) |
| DIN 86264-2000 |
Y型,软密封,带法兰的短型船用直通阀.DN15-DN200 |
(Straight way valves for shipboard use - Y-patten, soft sealing, short type with flanges - DN 15 to DN 200) |
| DIN 86265-2000 |
Y型,软密封,常规尺寸带法兰的船用直通阀.DN15-DN200 |
(Straight way valves for shipboard use - Y-patten, soft sealing, normal type, with flanges - DN 15 to DN 200) |
| DIN 86266-2002 |
船舶和航海技术.用手夹紧和法兰连接的超轻型法兰的截止阀 |
(Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10) |
| DIN 86280-1-1999 |
船舶和海洋建筑上的管道.排水设备.第1部分:卫生排水.系统设计 |
(Pipework on ships and marine structures - Drainage systems - Part 1: Sanitary drainage; system design) |
| DIN 86280-2-1999 |
船舶和海洋建筑上的管道.排水设备.第2部分:卫生排水.沉降系统中的排气管 |
(Pipework on ships and marine structures - Drainage systems - Part 2: Sanitary drainage; drain piping in gravity system) |
| DIN 86280-3-1999 |
船舶和海洋建筑上的管道.排水设备.第3部分:卫生排水.真空系统中的排气管 |
(Pipework on ships and marine structures - Drainage systems - Part 3: Sanitary drainage; drain piping for vacuum system) |
| DIN 86280-4-1999 |
船舶和海洋建筑上的管道.排水设备.第4部分:卫生排水.泄出管 |
(Pipework on ships and marine structures - Drainage systems - Part 4: Sanitary drainage; sewage disposal pipes) |
| DIN 86280-5-1999 |
船舶和海洋建筑上的管道.排水设备.第5部分:甲板排水,货舱排水和泳池排水 |
(Pipework on ships and marine structures - Drainage systems - Part 5: Drainage of decks, cargo holds and swimming pools) |
| DIN 86282-1995 |
船用排水设备.国际通用废水排出连接用法兰 |
(Sewage systems on ships - Flanges for international discharge connections) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com