标准号 |
中文名称 |
英文名称 |
DIN EN 293-1992 |
油压喷雾器喷嘴.最低要求.检验 |
(Oil pressure atomizing nozzles; minimum requirements, testing; german version EN 293:1992) |
DIN EN 2930-1996 |
航空和航天.耐高温镍基合金NI-P101HT(Waspaloy一种耐高温热镍基合金)制镀银长螺纹细螺杆十二角螺丝钉.等级: |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperatur)/730 C; German version EN 2930:1996) |
DIN EN 2931-1994 |
航空和航天.耐高温钢FE-PA92HT(A286)制长螺纹扁柄T型头螺丝.等级:900MPa(室温)650摄氏度 |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2931:1994) |
DIN EN 29313-1992 |
点焊设备.冷却管 |
(Resistance spot welding equipment; cooling tubes (ISO 9313:1989); german version EN 29313:1992) |
DIN EN 29314-1-1993 |
信息处理系统.光纤分布数据接口(FDDI).第1部分:物理层协议(PHY) |
(Information processing systems; fibre distributed date interface (FDDI); part 1: token ring physical layer protocol (PHY) (ISO 9314-1:1989); English version EN 29314-1:1993) |
DIN EN 29314-2-1993 |
信息处理系统.光纤排列数据的接口(FDDI).第2部分:令牌环媒存取控制方法 |
(Information processing systems; fibre distributed date interface (FDDI); part 2: token ring media access control (MAC) (ISO 9314-2:1989); English version EN 29314-2-1993) |
DIN EN 29315-1993 |
信息处理系统.软驱和它的控制器之间的接口 |
(Information processing systems - Interface between flexible disk cartridge drives and their host controllers (ISO 9315:1989); English version EN 29315:1992) |
DIN EN 29318-2-1993 |
信息技术.智能外圈接口.第2部分:磁盘驱动器专用指令集 |
(Information technology - Intelligent peripheral interface - Part 2: device specific command set for magnetic disk drives (ISO/IEC 9318-2:1990); English version EN 29318-2:1993) |
DIN EN 29318-3-1993 |
信息技术.智能外围接口.第3部分:磁盘驱动器总指令集 |
(Information technology - Intelligent peripheral interface - Part 3: device generic command set for magnetic and optical disk drives (ISO/IEC 9318-3:1990); English version EN 29318-3:1993) |
DIN EN 29318-4-1993 |
信息技术.智能外围接口.第4部分:磁带驱动器的指令集 |
(Information technology; intelligent peripheral interface; part 4: device generic command set for magnetic tape drives (ISO/IEC 9318-4:1990); English version EN 29318-4:1993) |
DIN EN 2932-1996 |
航空和航天.耐高温钢FE-PA92HT(A286)制镀银长螺纹细螺杆T字头螺丝钉.等级:900Mpa(室温外)/650℃ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2932:1996) |
DIN EN 2933-1996 |
航空和航天.耐高温镍基合金HI-P100HT(因康镍718)制长螺纹,细杆,T字头螺栓.等级:1275MPa(室温下)/650℃ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 C; German version EN 2933:1996) |
DIN EN 29333-1992 |
镶牙材料 |
(Dental brazing materials (ISO 9333:1990); german version EN 29333:1991) |
DIN EN 2934-1996 |
航空和航天.耐高温镍基合金HI-P100HT(因康镍718)制长螺纹,细杆,镀银,T字头螺栓.等级:1275MPa(室温下)/650℃ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 C; German version EN 2934:1996) |
DIN EN 2935-1996 |
航空和航天.耐高温镍基合金HI-P101HT(沃斯帕落伊合金)制长螺纹,细杆,T字头螺栓.等级:1210MPa(室温下)/730℃ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 C; German version EN 2935:1996) |
DIN EN 2936-1996 |
航空和航天.耐高温镍基合金HI-P101HT(沃斯帕落伊合金)制长螺纹,细杆,镀银,T字头螺栓.等级:1210MPa(室温下)/ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa (at ambient temperature)/730 C; German version EN 2936:1996) |
DIN EN 29367-1-1994 |
滚装船上汽车捆绑和固定装置.一般要求.第1部分:商业用车和车辆组合,半挂车除外 |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded (ISO 9367-1:1989); German version EN 29367-1:1993) |
DIN EN 29367-2-1995 |
滚装船上汽车捆绑和固定装置.一般要求.第2部分:半挂车 |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Part 2: Semi-trailers (ISO 9367-2:1994); German version EN 29367-2:1994) |
DIN EN 2937-1994 |
航空和航天.耐高温钢FE-PA92HT(A286)制全螺纹六角头螺丝.等级:900MPa(室温)650摄氏度 |
(Aerospace series - Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2937:1994) |
DIN EN 2938-1995 |
航空和航天.镀银FE-PA92HT(A286)耐高温钢制螺纹到底部的六角螺钉.等级:900MPa(室温下)/650℃ |
(Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2938:1995) |
DIN EN 2939-1994 |
航空和航天.耐高温钢FE-PA92HT(A286)制全螺纹翼型十字槽100度沉头螺丝.等级:900MPa(室温)650摄氏度 |
(Aerospace series - Screws, 100 countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2939:1994) |
DIN EN 294-1992 |
机器的安全性.防止上肢触及危险位置的安全距离 |
(Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs; german version EN 294:1992) |
DIN EN 2940-1995 |
航空和航天.镀银FE-PA92HT(A286)耐高热钢制螺纹到顶部翼形十字槽100度沉头螺钉.等级:900MPa(室温下)/650℃ |
(Aerospace series - Screws, 100 countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2940:1995) |
DIN EN 2942-1998 |
航空和航天.镀银,自锁,耐高温镍基合金NI-PH2801(因康X750)制金属丝螺纹插件 |
(Aerospace series - Insert, screw thread, helical coil, self-locking, in head resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated; German version EN 2942:1998) |
DIN EN 2943-1998 |
航空和航天.自锁绕线螺纹插件.交货技术条件 |
(Aerospace series - Inserts, screw thread, helical coil, self-locking - Technical specification; German version EN 2943:1998) |
DIN EN 2944-1998 |
航空和航天.自锁,耐蚀钢FE-PA3004制金属丝螺纹插件 |
(Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting alloy FE-PA3004; German version EN 2944:1998) |
DIN EN 2945-1998 |
航空和航天.自锁金属丝螺纹插件.安装方法 |
(Aerospace series - Inserts, screw thread, helical coil, self-locking - Assembly procedure; German version EN 2945:1998) |
DIN EN 29454-1-1994 |
软焊剂.分类和要求.第1部分:分类、加标签和包装 |
(Soft soldering fluxes; classification and requirements; part 1: classification, labelling and packaging (ISO 9454-1:1990); German version EN 29454-1:1993) |
DIN EN 29455-1-1994 |
软钎剂.试验方法.第1部分:不挥发性物质的测定.重量分析法 |
(Soft soldering fluxes; test methods; part 1: determination of non-volatile matter, gravimetric method (ISO 9455-1:1990); German version EN 29455-1:1993) |
DIN EN 29455-11-1994 |
软钎焊剂.试验方法.第11部分:钎焊剂残留物的可溶性 |
(Soft soldering fluxes; test methods; part 11: solubility of flux residues (ISO 9455-11:1991); German version EN 29455-11:1993) |
DIN EN 29455-14-1994 |
软钎焊剂.试验方法.第14部分:钎焊剂残留物胶粘度测定 |
(Soft soldering fluxes; test methods; part 14: assessment of tackiness of flux residues (ISO 9455-14:1991); German version EN 29455-14:1993) |
DIN EN 29455-5-1994 |
软钎焊剂.试验方法.第5部分:铜镜试验 |
(Soft soldering fluxes; test methods; part 5: copper mirror test (ISO 9455-5:1992); German version EN 29455-5:1993) |
DIN EN 29455-8-1994 |
软钎焊剂.试验方法.第8部分:锌含量测定 |
(Soft soldering fluxes; test methods; part 8: determination of zinc content (ISO 9455-8:1991); German version EN 29455-8:1993) |
DIN EN 2948-1996 |
航空和航天.钝化耐高温钢制有耳锁紧垫圈 |
(Aerospace series - Washers, tab, in heat resisting steel, passivated; German version EN 2948:1996) |
DIN EN 2949-1996 |
航空和航天.钝化耐蚀钢制锁紧垫圈 |
(Aerospace series - Washers, wire locking, in corrosion resisting steel - passivated; German version EN 2949:1996) |
DIN EN 295 Bb.1-2000 |
污水排放管道用陶土管和配件以及管连接件.标准和其它文献的调查 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Survey on standards and other documents) |
DIN EN 295-1-1999 |
污水管道用陶土管.异型件及管连接件.第1部分:要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements (includes Amendment A1:1996, Amendment A2:1996 and Amendment A3:1999); German version EN 295-1:1991 + A1:1996 + A2:1996 + A3:1999) |
DIN EN 295-10-2005 |
排水和污水管道用陶土管、配件及管连接件.第10部分:性能要求 |
|
DIN EN 295-10-2005 |
排水和污水管道用陶土管、配件及管连接件.第10部分:性能要求 |
|
DIN EN 295-2-1999 |
污水管道用陶土管.异型件及管连接件.第2部分:质量监测和取样 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 2: Quality control and sampling (includes Amendment A1:1999); German version EN 295-2:1991 + A1:1999) |
DIN EN 295-3-1999 |
污水管道用陶土管,异型件及管连接件.第3部分:检验方法(包括修改件A1:1998) |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test methods (includes amendment A1:1998); German version EN 295-3:1991 + A1:1998) |
DIN EN 295-4-1995 |
排水管和污水管用的陶土管和配件及管接头.第4部分:专用配件,转换接头和可互换附件的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adapters and compatible accessories; German version EN 295-4:1995) |
DIN EN 295-5-1999 |
排水管道和排水通道用陶土管,管件和管连接件.第5部分:编织管和管件的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements for perforated vitrified clay pipes and fittings (includes Amendment A1:1999); German version EN 295-5:1994 + A1:1999) |
DIN EN 295-6-1995 |
污水管道用陶土管.异型件及管连接件.第6部分:陶土井筒的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 6: Requirements for vitrified clay manholes; German version EN 295-6:1995) |
DIN EN 295-7-1995 |
污水管道用陶土管.异型件及管连接件.第7部分:陶土管和管向前移动时用的连接件的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 7: Requirements for vitrified clay pipes and joints for pipe jacking; German version EN 295-7:1995) |
DIN EN 29529-1-1992 |
信息处理系统.每面80磁道.改进调频方式以15916次磁通变换/弧度记录速率直径为90毫米(3.5英寸)的盒式软磁盘 |
(Information processing systems; data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recordings at 15916 ftprad, on 80 tracks on each side; part 1: dimensional, physical and magnetic characteristics (ISO/IEC 952 |
DIN EN 29529-2-1992 |
信息处理系统.每面80磁道.改进调频方式以15916次磁通变换/弧度记录速率直径为90毫米(3.5英寸)的盒式软磁盘 |
(Information processing systems; data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 15916 ftprad, on 80 tracks on each side; part 2: track format (ISO/IEC 9529-2:1989); german version EN 29529-2:19 |
DIN EN 2955-1993 |
航空和航天.钛和钛合金废料的再加工 |
(Aerospace series; recycling of titanium and titanium alloy scrap; German version EN 2955:1993) |
DIN EN 2955/A1-1995 |
航空和航天.钛和钛合金废料的再加工 |
(Aerospace series - Recycling of titanium and titanium alloy scrap; German version EN 2955:1993/AC:1995) |
DIN EN 29592-1-1991 |
情报加工的图示系统.程序器分级人机相互作用的图示系统.第1部分:功能描述(ISO/IEC9592-1-89.第1版) |
(Information processing systems; computer graphics; Programmer`s Hierarchical Interactive Graphics System (PHIGS); part 1: functional description (ISO/IEC 9592-1:1989, edition 1); english version EN 29592-1:1991) |
DIN EN 29592-1/A1-1994 |
情报加工的图示系统.程序器分级人机相互作用的图示系统.第1部分:功能描述(ISO/IEC9592-1-89.第1版) |
(Information processing systems - Computer graphics - Programmer`s Hierarchical Interactive Graphics Systems (PHIGS) - Part 1: Functional description (ISO/IEC 9592-1:1989, Amendment 1:1992); English version EN 29592-1:1991/A1:1993) |
DIN EN 29592-1/A10-1995 |
情报加工的图示系统.程序器分级人机相互作用的图示系统.第1部分:功能描述 |
(Information processing systems - Computer graphics - Programmer`s Hierarchical Interactive Graphics Systems (PHIGS) - Part 1: Functional description (ISO/IEC 9592-1:1989/Cor. 1:1993 + Cor. 2:1994); English version EN 29592-1:1991/AC:1994) |
DIN EN 29592-2-1991 |
情报加工的图示系统.程序器分级人机相互作用的图示系统.第2部分:文档文件的格式ISO/IEC9592-2-89.第1版) |
(Information processing systems; computer graphics; programmer`s hierarchical interactive graphics system (PHIGS) part 2: archive file format (ISO/IEC 9592-2:1989, edition 1); english version EN 29592-2:1991) |
DIN EN 29592-2/A1-1994 |
情报加工的图示系统.程序器分级人机相互作用的图示系统.第2部分:文档文件的格式ISO/IEC9592-2-89.第1版.修 |
(Information processing systems - Computer graphics - Programmer`s Hierarchical Interactive Graphics Systems (PHIGS) - Part 2: Archive file format (ISO/IEC 9592-2:1989, Amendment 1:1992); English version EN 29592-2:1991/A1:1993) |
DIN EN 29592-3-1991 |
情报加工的图示系统.程序器分级人机相互作用的图示系统.第3部分:存档明码电文的编码ISO/IEC9592-3-89.第1版 |
(Information processing systems; computer graphics; programmer`s hierarchical interactive graphics system (PHIGS); part 3: clear-text encoding of archive file (ISO/IEC 9592-3:1989, edition 1); english version EN 29592-3:1991) |
DIN EN 29592-3/A1-1994 |
情报加工的图示系统.程序器分级人机相互作用的图示系统.第3部分:存档明码电文的编码ISO/IEC9592-3-89.第1版 |
(Information processing systems - Computer graphics - Programmer`s Hierarchical Interactive Graphics Systems (PHIGS) - Part 3: Clear-text encoding of archive file (ISO/IEC 9592-3:1989, Amendment 1:1992); English version EN 29592-3:1991/A1:1993) |
DIN EN 29658-1992 |
钢.铝含量的测量.原子吸收分光光度法 |
(Steel; determination of aluminium content; flame atomic absorption spectrometric method (ISO 9658:1990); german version EN 29658:1991) |
DIN EN 29692-1994 |
涂剂焊条金属电弧焊.气体保护金属电弧焊和气焊.钢接头焊口加工 |
(Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding; joint preparations for steel (ISO 9692:1992); German version EN 29692:1994) |
DIN EN 297-1998 |
用气体燃料的锅炉.带额定热载小于或等于70kw气压喷嘴的B11型和B11BS型锅炉 |
(Gas-fired central heating boilers - Type B and B boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW; German version EN 297:1994 + A1:1994 + A2:1996 + A3:1996) |
DIN EN 297-2005 |
燃气集中供暖锅炉.装有标称热输入量不超过70kw大气燃烧器的B型锅炉 |
|
DIN EN 297/A5-1998 |
用气体燃料的锅炉.带额定热载小于或等于70kw气压喷嘴的B11型和B11BS型锅炉.修改A5 |
(Gas-fired central heating boilers - Type B and Bboilers, fitted with atmospheric burners of nominal heat input exceeding 70 kW; Amendment A5; German version EN 297:1994/A5:1998) |
DIN EN 297/A6-2003 |
燃气式中央供暖锅炉.装配有标称热输入不大于70kw的常压燃烧器的B11型和B11BS型锅炉.修改件A6 |
(Gas-fired central heating boilers - Type B and B boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW; Amendment A6; German version EN 297:1994/A6:2003) |
DIN EN 29775 Berichtigung 1-2001 |
DINEN29775-1993的勘误 |
(Corrigendum to DIN EN 29775:1993 (German version EN 29775:1993/A1:2000)) |
DIN EN 29775-1993 |
游艇.功率为15KW至40KW单个舷外动力机的控制设备 |
(Small craft; remote steering systems for single outboard motors of 15 kW to 40 kW (ISO 9975:1990); German version EN 29975:1993) |
DIN EN 298-2004 |
带或不带鼓风的气体燃烧器和燃气具用自动气体燃烧器控制装置 |
(Automatic gas burner control systems for gas burners and gas burning appliances with or without fans; German version EN 298:2003) |
DIN EN 298-2004 |
带或不带鼓风的气体燃烧器和燃气具用自动气体燃烧器控制装置 |
|
DIN EN 2985-1996 |
航空和航天.镍镉电池.A型尺寸结构 |
(Aerospace series - Nickel-cadmium batteries of format A type; German version EN 2985:1996) |
DIN EN 2986-1996 |
航空和航天.镍镉电池组.B容积结构 |
(Aerospace series - Nickel-cadmium batteries - Of format B type; German version EN 2986:1996) |
DIN EN 29865-1993 |
纺织品.通过邦迪斯门雨淋试验测定.防水性能 |
(Textiles; determination of water-repellency of fabrics by the Bundesmann rain-shower test (ISO 9865:1991); German version EN 29865:1993) |
DIN EN 2987-1996 |
航空和航天.镍镉电池.C型尺寸结构 |
(Aerospace series - Nickel-cadmium batteries of format C type; German version EN 2987:1996) |
DIN EN 2988-1996 |
航空和航天.镍镉电池.D型尺寸结构 |
(Aerospace series - Nickel-cadmium batteries of format D type; German version EN 2988:1996) |
DIN EN 29885-1994 |
宽口玻璃仪器.顶部密封表面的平面度偏差.试验方法 |
(Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods (ISO 9885:1991); German version EN 29885:1994) |
DIN EN 29899-1994 |
编程语言-C |
(Programming languages; C; (ISO/IEC 9899:1990); English version EN 29899:1993) |
DIN EN 29899/A1-1996 |
编程语言-C.修正1:语言定义的完整化 |
(Programming languages - C - Amendment 1: C integrity (ISO/IEC 9899:1990/AMD 1:1995); English version EN 29899:1993/A1:1996) |
DIN EN 299-1998 |
油压喷雾器喷嘴.喷雾特性和角度的检验 |
(Oil pressure atomizing nozzles - Determination of the angle and spray characteristics; German version EN 299:1998) |
DIN EN 2991-1996 |
航空和航天.镍隔电池.E尺寸设计结构 |
(Aerospace series - Nickel-cadmium batteries - Of format E type; German version EN 2991:1996) |
DIN EN 29917-1994 |
牙科用水基胶粘剂 |
(Dental water-based cements (ISO 9917:1991 + Technical Corrigendum 1); German version EN 29917:1994) |
DIN EN 2993-1996 |
航空和航天.镍隔电池.F尺寸设计结构 |
(Aerospace series - Nickel-cadmium batteries - Of format F type; German version EN 2993:1996) |
DIN EN 29945-1-1994 |
信息技术.系统可交换性用操作系统接口.第1部分:系统和应用程序间接口(API).C语言 |
(Information technology; Portable Operating System Interface (POSIX); part 1: System Application Program Interface (API) C language (ISO/IEC 9945-1-1990); English version EN 29945-1:1993) |
DIN EN 2997-1-1997 |
航空和航天.工作温度常数为175℃,200℃,极值为260℃时,耐火或不耐火的,带螺纹连接器的电器圆形插接件.第1部 |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 1: Technical specification; German version EN 2997-1:1997) |
DIN EN 2997-10-1997 |
航空航天系列.连续运行温度为175℃,200℃,尖端温度为260℃时,耐火或不耐火的,有一对环状螺纹的,电子循环连 |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 10: Protective cover for plug, product standard; German version E |
DIN EN 2997-11-1997 |
航空航天系列.连续运行温度为175℃,200℃,尖端温度为260℃时,耐火或不耐火的,有一对环状螺纹的,电子循环连 |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 11: Dummy receptacle; product standard; German version EN 2997-11 |
DIN EN 2997-2-1997 |
航空和航天.运行温度常数为175℃,200℃,温度极限值为260℃时,耐火或不耐火的,带螺纹连接器的电器图形插接器 |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 2: Specification of performance and contact arrangements; German |
DIN EN 2997-3-1997 |
航空和航天.运行温度常数为175℃,200℃,温度极限值为260℃,耐火或不耐火的,带螺纹连接器的电器图形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 3: Square flange receptacle; product standard; German version EN |
DIN EN 2997-4-1997 |
航空和航天.运行温度常数为175℃,200℃,温度极限值为260℃,耐火或不耐火的,带螺纹连接器的电器图形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 4: Jam-nut mounted receptacle; product standard; German version E |
DIN EN 2997-5-1997 |
航空和航天.运行温度常数为175℃,200℃,温度极限值为260℃,耐火或不耐火的,带螺纹连接器的电器图形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 5: Hermetic, square flange receptacle; product standard; German v |
DIN EN 2997-6-1997 |
航空和航天.运行温度常数为175℃,200℃,温度极限值为260℃,耐火或不耐火的,带螺纹连接器的电器图形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 6: Hermetic jam-nut mounted receptacle; product standard; German |
DIN EN 2997-7-1997 |
航空和航天.运行温度常数为175℃,200℃,温度极限值为260℃,耐火或不耐火的,带螺纹连接器的电器图形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 7: Hermetic receptacle with round flange attached by soldering or |
DIN EN 2997-8-1997 |
航空和航天.运行温度常数为175℃,200℃,温度极限值为260℃,耐火或不耐火的,带螺纹连接器的电器图形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 8: Plug; product standard; German version EN 2997-8:1997) |
DIN EN 2997-9-1997 |
航空和航天.运行温度常数为175℃,200℃,温度极限值为260℃,耐火或不耐火的,带螺纹连接器的电器图形插接器. |
(Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 C continuous, 200 C continuous, 260 C peak - Part 9: Protective cover for receptacle; product standard; German vers |
DIN EN 2998-1996 |
航空和航天.耐高温钢制钝化平垫圈 |
(Aerospace series - Washers, flat, in heat resisting steel, passivated; German version EN 2998:1996) |
DIN EN 29983-1992 |
信息处理系统.空白软磁盘的标记(ISO/IEC9983-89) |
(Information processing systems; designation of unrecorded flexible disk cartridges (ISO/IEC 9983:1989); german version EN 29983:1991) |
DIN EN 3 Bb.1-2000 |
便携式灭火器.灭火剂和环境保护 |
(Portable fire extinguishers - Fire extinguishing media and environment protection) |
DIN EN 3 Bb.2-2001 |
EN3说明性文件.便携式灭火器 |
(Interpretation document of EN 3 - Portable fire extinguishers; German version CR 13934:2000) |
DIN EN 3-1-1996 |
轻便式灭火器.第1部分:名称.有效灭火时间.A级和B级火灾的检验项 |
(Portable fire extinguishers - Part 1: Description, duration of operation, class A and B fire test; German version EN 3-1:1996) |
DIN EN 3-2-1996 |
轻便式灭火器.第2部分:气密检验.导电性能检验.压实检验.特殊要求 |
(Portable fire extinguishers - Part 2: Tightness dielectric test, tamping test, special provision; German version EN 3-2:1996) |
DIN EN 3-3-1994 |
轻便式灭火器.结构设计.抗压强度.机械检验 |
(Portable fire extinguishers; construction, resistance to pressure, mechanical tests; German version EN 3-3:1994) |
DIN EN 3-4-1996 |
轻便式灭火器.第4部分:灌充量.灭火能力的最低要求 |
(Portable fire extinguishers - Part 4: Charges, minimum required fire; German version EN 3-4:1996) |
DIN EN 3-5-1997 |
轻便式灭火器.第5部份:附加的要求和检验(包括更改AC:1997) |
(Portable fire extinguishers - Part 5: Specification and supplementary tests (includes Amendment AC:1997); German version EN 3-5:1996 + AC:1997) |
DIN EN 3-6-1999 |
轻便式灭火器.第6部份:符合EN3第1部分到第5部分要求的轻便式灭火器一致性确认用规范 |
(Portable fire extinguishers - Part 6: Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5 (includes Amendment A1:1999); German version EN 3-6:1995 + A1:1999) |
DIN EN 3-7-2004 |
便携式灭火器.第7部分:特性、性能要求和试验方法 |
|
DIN EN 30-1-1-1998 |
家用燃气灶具.第1-1部分:安全性概述 |
(Domestic cooking appliances burning gas fuel - Part 1-1: Safety, General; German version EN 30-1-1:1998) |
DIN EN 30-1-1-2005 |
家用燃气灶具.第1-1部分:安全性.总则 |
|
DIN EN 30-1-1/A1-1999 |
家用燃气灶具.第1-1部分:安全性.概述.修正A1 |
(Domestic cooking appliances burning gas - Part 1-1: Safety; General; Amendment A1; German Version EN 30-1-1:1998/A1:1999) |
DIN EN 30-1-2-1999 |
家用燃气灶具.第1-2部分:安全性.强制对流式烘炉和/或烤架装置 |
(Domestic cooking appliances burning gas - Part 1-2: Safety; appliances having forced-convection ovens and/or grills; German version EN 30-1-2:1999) |
DIN EN 30-1-4-2002 |
家用燃气灶具.第1-4部分:安全性.带自动燃烧控制系统的含有一个或更多的燃烧炉的灶具 |
(Domestic cooking appliances burning gas - Part 1-4: Safety; Appliances having one or more burners with an automatic burner control system; German version EN 30-1-4:2002) |
DIN EN 30-2-1-1998 |
家用燃气灶具.第2-1部分:能源合理利用的概述 |
(Domestic cooking appliances burning gas - Part 2-1: Rational use of energy; General; German version EN 30-2-1:1998) |
DIN EN 30-2-1-2005 |
家用燃气灶具.第2-1部分:能源合理利用.总则 |
|
DIN EN 30-2-2-1999 |
家用燃气灶具.第2-2部分:能源的合理利用.强制对流式烘炉和/或烤架装置 |
(Domestic cooking appliances burning gas - Part 2-2: Rational use of energy; appliances having forced-convection ovens and/or grills; German version EN 30-2-2:1999) |
DIN EN 300-1997 |
细长经校正的木屑制板(OSB).定义,分类和要求 |
(Oriented Strand Boards (OSB) - Definitions, classification and specifications; German version EN 300:1997) |
DIN EN 300001-2000 |
公共交换电话网(PSTN)的附件.与PSTN中模拟用户接口连接用设备的一般技术要求 |
(Attachements to the Public Switched Telephone Network (PSTN) - General technical requirements for equipment connected to an analogue subscriber interface in the PSTN (Endorsement of the English version EN 300001 V 1.5.1 (1998-10) as German Standard)) |
DIN EN 300008-1-2001 |
综合业务数字网(ISDN).信号系统No.7.文电传输到支持国际互连.第1部分:协议规范 |
() |
DIN EN 300008-1-2004 |
综合业务数字网(ISDN).信令系统No.7.支持国际互连的文电传输部分.第1部分:协议规范 |
|
DIN EN 300009-1-2001 |
综合业务数字网(ISDN).信号系统No.7.支持国际互连的信号连接控制部分(无连接和定向连接).第1部分:协议规范 |
(Integrated Services Digital Network (ISDN) - Signalling system No. 7; Signalling Connection Control Part (SCCP) (connectionless and connection-oriented) to support international interconnection - Part 1: Protocol specification (ITU-T-Recommendation Q.711 |
DIN EN 300009-2-2003 |
综合业务数字网(ISDN).信令系统No.7(SS7).支持国际互连的信令连接控制部分(SCCP)(非连接和定向连接等级2). |
(Integrated Services Digital Network (ISDN) - Signalling System No. 7 (SS7); Signalling Connection Control Part (SCCP) (connectionless and connection-oriented class 2) to support international interconnection - Part 2: Protocol Implementation Conformance |
DIN EN 300011-1-2001 |
综合业务数字网(ISDN).初级速率用户网络接口(UNI).第1部分:层1规范 |
(Integrated Services Digital Network (ISDN) - Primary rate User Network Interface (UNI) - Part 1: Layer 1 specification (Endorsement of the English version EN 300011-1 V 1.2.2. (2000-05) as German standard)) |
DIN EN 300012-1-2001 |
综合业务数字网(ISDN).基础用户网络接口(UNI).第1部分:层1规范 |
(Integrated Services Digital Network (ISDN) - Basic User Network Interface (UNI) - Part 1: Layer 1 specification (Endorsement of the English version EN 300012-1 V 1.2.2. (2000-05) as German standard)) |
DIN EN 300019-1-0-2004 |
设备工程(EE).电信设备的环境条件和环境试验.第1-0部分:环境条件的分类.说明 |
|
DIN EN 300019-1-1-2004 |
设备工程(EE).电信设备的环境条件和环境试验.第1-1部分:环境条件的分类.存储 |
|
DIN EN 300019-1-2-2004 |
设备工程(EE).电信设备的环境条件和环境试验.第1-2部分:环境条件的分类.运输 |
|