标准号 |
中文名称 |
英文名称 |
DIN ISO 799-1988 |
造船.领航员扶梯 |
(Shipbuilding; pilot ladders; identical with ISO 799, edition 1986) |
DIN ISO 7991-1998 |
玻璃.热平均线性膨胀系数的测定 |
(Glass - Determination of coefficient of mean linear thermal expansion (ISO 7991:1987)) |
DIN ISO 7996-1990 |
环境空气.氧化氮含量浓度的测定.化学发光法 |
(Ambient air; determination of the mass concentration of nitrogen oxides; chemiluminescence method; identical with ISO 7996:1985) |
DIN ISO 8002-1995 |
机械振动.地面车辆.报告测量数据的方法 |
(Mechanical vibrations - Land vehicles - Method for reporting measured data; identical with ISO 8002:1986) |
DIN ISO 8013-1993 |
硫化橡胶.压缩或切变的蠕变测定 |
(Rubber, vulcanized; determination of creep in compression or shear; identical with ISO 8013:1988) |
DIN ISO 8015-1986 |
技术制图.公差标注基本原则 |
(Technical drawings; fundamental tolerancing principle; identical with ISO 8015, edition 1985) |
DIN ISO 8016-1989 |
农业机械.整体轮毂的车轮 |
(Machinery for agriculture; wheels with integral hub; identical with ISO 8016:1985) |
DIN ISO 8020-2003 |
冲压工具.有圆柱头和直杆或者缩径柄的冲头 |
(Tools for pressing - Punches with cylindrical head and straight or reduced shank (ISO 8020:2002)) |
DIN ISO 8027-1986 |
道路车辆.客车用空气过滤器构件.尺寸 |
(Road vehicles; air filter elements for passenger cars; dimensions; identical with ISO 8027, edition 1984) |
DIN ISO 8036-1-2003 |
光学和光学仪器.显微镜.第1部分:通常用于光学显微术的浸油 |
(Optics and optical instruments - Microscopes - Part 1: Immersion oil for general use in light microscopy (ISO 8036-1:1998)) |
DIN ISO 8037-1-2003 |
光学和光学仪器.显微镜.载玻片.第1部分:尺寸、光学性能和标志 |
(Optics and optical instruments - Microscopes; Slides - Part 1: Dimensions, optical properties and marking (ISO 8037-1:1986)) |
DIN ISO 8039-2001 |
光学和光学仪器.显微镜.放大 |
(Optics and optical instruments - Microscopes - Magnification (ISO 8039:1997)) |
DIN ISO 8040-2003 |
光学和光学仪器.显微镜.镜筒导板和镜筒槽的连接尺寸 |
(Optics and optical instruments - Microscopes - Dimensions of tube slide and tube slot connections (ISO 8040:2001)) |
DIN ISO 8061-1992 |
高山雪橇紧固.松脱力矩值选择 |
(Alpine ski-bindings; selection of release torque values; identical with ISO 8061:1991) |
DIN ISO 8062-1998 |
铸件.尺寸公差和加工留量 |
(Castings - System of dimensional tolerances and machining allowances (ISO 8062:1994)) |
DIN ISO 8090-2000 |
自行车.术语.与ISO8090:1990等同 |
(Cycles - Terminology; Identical with ISO 8090:1990) |
DIN ISO 8093-1986 |
道路车辆.电子系统的故障判断试验 |
(Road vehicles; diagnostic testing of electronic systems; identical with ISO 8093, edition 1985) |
DIN ISO 8114-1997 |
纺织机械和附件.环锭纺纱机和环锭捻线机用锭子.等义术语一览表 |
(Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms (ISO 8114:1990)) |
DIN ISO 8115-1989 |
棉包.尺寸和密度 |
(Cotton bales; dimensions and density; identical with ISO 8115:1986) |
DIN ISO 8115-2-1997 |
棉包.第2部分:人造棉纤维的棉包.尺寸 |
(Bales - Part 2: Bales of man-made staple fibres - Dimensions (ISO 8115-2:1994)) |
DIN ISO 8115-3-1997 |
棉包.第3部分:棉纤维棉包.包装和加标签 |
(Bales - Part 3: Bales of cotton, packaging and labelling (ISO 8115-3:1995)) |
DIN ISO 8116-1-1997 |
纺织机械和附件.络纱经轴.第1部分:一般概念 |
(Textile machinery and accessories - Beams for winding - Part 1: General vocabulary (ISO 8116-1:1995)) |
DIN ISO 8116-2-1997 |
纺织机械和附件.络纱经轴.第2部分:整经轴 |
(Textile machinery and accessories - Beams for winding - Part 2: Warper`s beams (ISO 8116-2:1995)) |
DIN ISO 8116-3-1997 |
纺织机械和附件.络纱经轴.第3部分:织轴 |
(Textile machinery and accessories - Beams for winding - Part 3: Weaver`s beams (ISO 8116-3:1995)) |
DIN ISO 8116-4-1997 |
纺织机械和附件.络纱经轴.第4部分:织轴.整经轴和分段轴用法兰品质分级 |
(Textile machinery and accessories - Beams for winding - Part 4: Quality classification of flanges for weaver`s beams, warper`s beams and sectional beams (ISO 8116-4:1995)) |
DIN ISO 8116-5-1997 |
纺织机械和附件.络纱径轴.第5部分:经纱织机的分段织轴 |
(Textile machinery and accessories - Beams for winding - Part 5: Sectional beams for warp knitting machines (ISO 8116-5:1995)) |
DIN ISO 8116-6-1997 |
纺织机械和附件.络纱经轴.第6部分:织带和织针带用经轴 |
(Textile machinery and accessories - Beams for winding - Part 6: Beams for ribbon weaving and ribbon knitting (ISO 8116-6:1995)) |
DIN ISO 8116-7-1997 |
纺织机械和附件.络纱经轴.第7部分:纤维梳条和纱线用染色经轴 |
(Textile machinery and accessories - Beams for winding - Part 7: Beams for dyeing slivers, rovings and yarns (ISO 8116-7:1995)) |
DIN ISO 8116-8-1997 |
纺织机械和附件.络纱经轴.第8部分:跳动误差测量的定义和方法 |
(Textile machinery and accessories - Beams for winding - Part 8: Definitions of run-out tolerances and methods of measurement (ISO 8116-8:1995)) |
DIN ISO 8117-1990 |
纺织机械.针织机.环型织机的公称直径 |
(Textile machinery; knitting machines; nominal diameters of circular machines; identical with ISO 8117:1986) |
DIN ISO 8118-1988 |
织机.边撑圆筒 |
(Temple cylinders for weaving machines; identical with ISO 8118:1986) |
DIN ISO 8119-1-1990 |
纺织机械和附件.针织机用针.术语.第1部分:闩锁式针 |
(Textile machinery and accessories; needles for knitting machines; terminology; latch-type needles; identical with ISO 8119-1:1989) |
DIN ISO 8119-2-1990 |
纺织机械和附件.针织机用针.术语.第2部分:钩针 |
(Textile machinery and acessories; neddles for knitting machines; terminology; bearded needles; identical with ISO 8119-2:1989) |
DIN ISO 8119-3-1993 |
纺织机械和附件.针织机用针.术语.复合针 |
(Textile machinery and accessories; needles for knitting machines; terminology; compound needles; identical with ISO 8119-3:1992) |
DIN ISO 812-2004 |
硫化橡胶.低温脆性的测定 |
|
DIN ISO 8121-1990 |
纺织机械.针织机.铭牌内容 |
(Textile machinery; knitting machines; nameplate information; identical with ISO 8121:1986) |
DIN ISO 8122-1991 |
纺织机械.织机.大直径环形针织机的针号 |
(Textile machinery; knitting machines; number of needles for circular knitting machines of large nominal diameter; identical with ISO 8122:1988) |
DIN ISO 8122-2004 |
纺织机械.针织机.大公称直径圆机的针数 |
|
DIN ISO 8123-1997 |
道路车辆.起动发动机径节小齿轮 |
(Road vehicles - Diametral pitch starter motor pinions (ISO 8123:1991)) |
DIN ISO 813-2004 |
硫化或热塑性橡胶.与刚性底粘合强度的测定.90?剥离法 |
|
DIN ISO 8130-1-2005 |
粉末涂料.第1部分:用筛分法测定粒度分布 |
|
DIN ISO 8130-2-2005 |
粉末涂料.第2部分:用气体比较比重瓶测定密度 |
|
DIN ISO 8130-3-2005 |
粉末涂料.第3部分:用浮子式液体比重瓶测定密度 |
|
DIN ISO 8130-4-2005 |
粉末涂料.第4部分:降低爆裂极限值的计算 |
|
DIN ISO 8130-5-2005 |
粉末涂料.第5部分:粉末/空气混合物流动特性的测定 |
|
DIN ISO 8139-1990 |
气液传动.10巴系列气缸.杆端球面环孔配件.装配尺寸 |
(Pneumatic fluid power; cylinders, 10 bar series; rod end spherical eyes; mounting dimensions; identical with ISO 8139:1986) |
DIN ISO 8140-1991 |
气动传动.10巴(1000kPa)系列气缸.活塞杆U形叉.装配尺寸 |
(Pneumatic fluid power; cylinders, 10 bar series; rod end clevis; mounting dimensions; identical with ISO 8140:1986) |
DIN ISO 8146-1986 |
造船.长形孔板桅杆 |
(Shipbuilding; oval eyeplates; identical with ISO 8146, edition 1985) |
DIN ISO 8148-1986 |
造船.悬臂起重机吊杆顶端装置.固定型 |
(Shipbiulding; derrick head fittings, fixed type; identical with ISO 8148, edition 1985) |
DIN ISO 815-2000 |
硫化或热塑性橡胶.在环境温度、高温或低温下压缩永久变形的测定 |
(Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993)) |
DIN ISO 8216-0-1991 |
石油产品.燃料(F类).分类.总则 |
(Petroleum products; fuel (class F); classification; general; identical with ISO 8216-0:1986) |
DIN ISO 8216-1-1991 |
石油产品.燃料(F类).分类.第1部分:船用燃料种类 |
(Petroleum products; fuels (class F); classification; categories of marine fuels; identical with ISO 8216-1:1986) |
DIN ISO 8217-1993 |
石油产品.动力燃料(F类).对船用燃料的要求 |
(Petroleum products; fuels (class F); specifications of marine fuels; identical with ISO 8217:1987) |
DIN ISO 8226-1-1998 |
纸和纸板.湿膨胀性的测量.第1部分:最大相对湿度达到68%的湿膨胀性 |
(Paper and board - Measurement of hygroexpansivity - Part 1: Hygroexpansivity up to a maximum relative humidity of 68 % (ISO 8226-1:1994)) |
DIN ISO 8239-1990 |
缝纫机.缝纫机缝针.装配尺寸.公差和配合 |
(Sewing machines; sewing machine needles; fitting dimensions; tolerances and combinations; identical with ISO 8239:1987) |
DIN ISO 8243-1992 |
卷烟.取样 |
(Cigarettes; sampling; identical with ISO 8243:1991) |
DIN ISO 8253-1-1992 |
声学.听力测试方法.第1部分:基本纯音空气传导和骨传导听阈测听术 |
(Acoustics; audiometric test methods; part 1: basic pure tone air and bone conduction threshold audiometry; identical with ISO 8253-1:1989) |
DIN ISO 8253-2-1994 |
声学.听力试验方法.第2部分:纯音和窄频带信号声场测听术 |
(Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure tone and narrow-band test signals; identical with ISO 8253-2:1992) |
DIN ISO 8255-1-2003 |
光学和光学仪器.显微镜.盖玻璃.第1部分:尺寸公差、厚度和光学性能 |
(Optics and optical instruments - Microscopes; Cover glasses - Part 1: Dimensional tolerances, thickness and optical properties (ISO 8255-1:1986)) |
DIN ISO 8277-1989 |
船舶制造.管道工程.信息传输 |
(Shipbuilding; information processing; pipework; information transfer; identical with ISO 8277:1988) |
DIN ISO 8291-1987 |
釉瓷和搪瓷.自洁性能的试验方法 |
(Vitreous and porcelain enamels; method of test of self-cleaning properties; identical with ISO 8291, edition 1986) |
DIN ISO 8297-2000 |
声学.环境中声压级评定用多源工业设备声功率级的测定.工程法 |
(Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method (ISO 8297:1994)) |
DIN ISO 8314-1988 |
造船.跨架轴承和导向滑块轴承的枢轴配件 |
(Shipbuilding and marine structures; trunnion pieces for span bearings and lead block bearings; identical with ISO 8314, edition 1987) |
DIN ISO 8356-1985 |
道路车辆.柴油发动机.22型螺旋拧入式喷油嘴 |
(Road vehicles; diesel engines; screw-in injector; type 22; identical with ISO 8356, edition 1984) |
DIN ISO 8362-1-1990 |
注射容器及附件.第1部分:用玻璃管制成的注射剂小瓶 |
(Injection containers for injectables and accessories; injection vials made of glass tubing; identical with ISO 8362-1:1989) |
DIN ISO 8362-2-1989 |
注射容器及附件.第2部分:注射瓶的封口 |
(Injection containers for injectables and accessories; closures for injection vials; identical with ISO 8362-2:1988) |
DIN ISO 8362-3-1990 |
注射剂用的注射容器和附件.第3部分:注射剂小瓶用的铝帽 |
(Injection containers for injectables and accessories; aluminium caps for injection vials; identical with ISO 8362-3:1989) |
DIN ISO 8362-4-1996 |
注射容器及附件.第4部分:由模压玻璃制成的盛注射剂的小瓶 |
(Injection containers for injectables and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:1989)) |
DIN ISO 8362-5-1996 |
注射容器及附件.第2部分:注射剂小瓶用冷动干燥塞子 |
(Injection containers for injectables and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:1995)) |
DIN ISO 8362-6-1993 |
注射容器及附件.注射小瓶用铝塑合成材料制帽盖 |
(Injection containers for injectables and accessories; caps made of aluminium-plastics combinations for injection vials; identical with ISO 8362-6:1992) |
DIN ISO 8362-7-1996 |
注射容器及附件.第7部分:无重叠塑料部件的由铝和塑料复合物制的注射小瓶帽盖 |
(Injection containers for injectables and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:1995)) |
DIN ISO 8364-2000 |
高山雪撬和捆绑装置.捆绑安装面.要求和试验方法 |
(Alpine skis and bindings - Binding mounting area - Requirements and test methods (ISO 8364:1999)) |
DIN ISO 8374-2003 |
摄影技术.ISO安全光条件的测定 |
(Photography - Determination of ISO safelight conditions (ISO 8374:2001)) |
DIN ISO 8405-2000 |
铸模工具.圆柱头脱模顶销.一般用途的基本系列 |
(Tools for moulding - Ejector sleeves with cylindrical head - Basic series for general purposes (ISO 8405:1998)) |
DIN ISO 8406-2002 |
铸模用工具.铸模基座.圆形定位件和衬垫 |
(Tools for moulding - Moulded bases - Round locating elements and spacers (ISO 8406:2001)) |
DIN ISO 8426-1994 |
液压传动.液压泵和液压电动机.导出容积的测定 |
(Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity; identical with ISO 8426:1988) |
DIN ISO 8454-1997 |
卷烟.烟雾气相中一氧化碳含量的测定.非色散红外分析法 |
(Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method (ISO 8454:1995)) |
DIN ISO 8466-2-2000 |
水质.水的性能特性分析方法和评价方法的校准与计算.第2部分:非线性二级校准方程的校准方法 |
(Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second order calibration functions (ISO 8466-2:1993)) |
DIN ISO 8466-2-2004 |
水质.性能特征分析方法和评价方法的校准和计算.第2部分:使用非线性二级校准方程的方法 |
|
DIN ISO 8468-1993 |
船桥设计和装备.要求和导则 |
(Ship`s bridge layout and associated equipment; requirements and guidelines; identical with ISO 8468:1990) |
DIN ISO 8470-1993 |
道路车辆.带平底座和16mm平面宽度的M14×1.25火花塞和在汽缸盖座孔 |
(Road vehicles; M14 ?1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housing; identical with ISO 8470:1990 (status as of 1993)) |
DIN ISO 8471-1989 |
数据传输用按位存取控制方法.HDLC.高级数据链控制的过程平衡等级.转换设备中数据链的分层寻址判定.转移 |
(High-level data link control procedures, HDLC; address resolution/negotiation in asynchronous balanced mode over switched circuit; identical with ISO 8471:1987) |
DIN ISO 8485-1991 |
信息处理.程序设计语言.APL |
(Information processing; programming language APL; identical with ISO 8485:1989) |
DIN ISO 8486-1-1997 |
粘接磨料制磨具.粒度分布的测定和标识.第1部分:F4至F220磨粒 |
(Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220 (ISO 8486-1:1996)) |
DIN ISO 8486-2-1997 |
粘接磨料制磨具.粒度分布的测定和标识.第2部分:F230至F1200的磨粒 |
(Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F230 to F1200 (ISO 8486-2:1996)) |
DIN ISO 8489-1-1997 |
纺织机械和附件.圆锥形筒管.第1部分:推荐的主要尺寸 |
(Textile machinery and accessories - Cones for cross winding - Part 1: Recommended main dimensions (ISO 8489-1:1995)) |
DIN ISO 8489-2-1997 |
纺织机械和附件.圆锥形圆筒.第2部分:带3°30'半锥角圆筒的尺寸,公差和标识 |
(Textile machinery and accessories - Cones for cross winding - Part 2: Dimensions, tolerances and designation of cones with half angle 3 30 (ISO 8489-2:1995)) |
DIN ISO 8489-3-1997 |
纺织机械和附件.圆锥形圆筒.第3部分:带4°20'半锥角圆筒的尺寸,公差和标识 |
(Textile machinery and accessories - Cones for cross winding - Part 3: Dimensions, tolerances and designation of cones with half angle 4 20 (ISO 8489-3:1995)) |
DIN ISO 8489-4-1997 |
纺织机械和附件.圆锥形圆筒.第4部分:印染用带4°20'半锥角圆筒的尺寸,公差和标识 |
(Textile machinery and accessories - Cones for cross winding - Part 4: Dimensions, tolerances and designation of cones with half angle 4 20 for winding for dyeing purposes (ISO 8489-4:1995)) |
DIN ISO 8489-5-1997 |
纺织机械和附件.圆锥形圆筒.第5部分:带5°57'半锥角圆筒的尺寸,公差和标识 |
(Textile machinery and accessories - Cones for cross winding - Part 5: Dimensions, tolerances and designation of cones with half angle 5 57 (ISO 8489-5:1995)) |
DIN ISO 8524-1992 |
农用机械和拖拉机.播撒颗粒状杀虫剂或除草剂的设备.检验方法 |
(Agricultural machinery and tractors; equipment for distributing granulated crop protection products; test method; identical with ISO 8524:1986) |
DIN ISO 8528-1-1997 |
往复式内燃机驱动的交流发电机组.第1部分:使用,额定功率和性能 |
(Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performance (ISO 8528-1:1993)) |
DIN ISO 8528-2-1997 |
往复式内燃机驱动的交流发电机组.第2部分:发动机 |
(Reciprocating internal combustion engine driven alternating current generating sets - Part 2: Engines (ISO 8528-2:1993)) |
DIN ISO 8528-3-1997 |
往复式内燃机驱动的交流发电机组.第3部分:机组交流发电机 |
(Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets (ISO 8528-3:1993)) |
DIN ISO 8528-4-1997 |
往复式内燃机驱动的交流发电机组.第4部分:控制装置和开关装置 |
(Reciprocating internal combustion engine driven alternating current generating sets - Part 4: Control and switchgear (ISO 8528-4:1993)) |
DIN ISO 8528-5-1997 |
往复式内燃机驱动的交流发电机组.第5部分:发电机组 |
(Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets (ISO 8528-5:1993)) |
DIN ISO 8528-6-1997 |
往复式内燃机驱动的交流发电机组.第6部分:试验方法 |
(Reciprocating internal combustion engine driven alternating current generating sets - Part 6: Test methods (ISO 8528-6:1993)) |
DIN ISO 8528-7-1997 |
往复式内燃机驱动的交流发电机组.第7部分:规范和设计的技术报告 |
(Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design (ISO 8528-7:1994)) |
DIN ISO 8528-9-1999 |
往复式内燃机驱动的交流发电机组.第9部分:机械振动的测量和评定 |
(Reciprocating internal combustion engines driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations (ISO 8528-9:1995)) |
DIN ISO 8535-1-1995 |
压燃式发动机.高压喷射燃油管用的钢管.第1部分:无缝冷拔单壁钢管的要求 |
(Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes (ISO 8535-1:1990 + AMD 1:1993)) |
DIN ISO 8536-1-2001 |
医用输液设备.第1部分:输液玻璃瓶 |
(Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2000)) |
DIN ISO 8536-3-2001 |
医用输液设备.第3部分:输液瓶铝帽 |
(Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:1999)) |
DIN ISO 8536-6-1996 |
医用输液设备.第6部分:输液瓶的冷冻干燥瓶 |
(Infusion equipment for medical use - Part 6: Freeze drying closures for infusion bottles (ISO 8536-6:1995)) |
DIN ISO 8536-7-2001 |
医用输液设备.第7部分:输液小瓶用铝塑合成材料制帽盖 |
(Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles (ISO 8536-7:1999)) |
DIN ISO 8560-1989 |
技术制图.建筑制图.模数尺寸管线和栅架的表示法 |
(Construction drawings; representation of modular sizes, lines and grids; identical with ISO 8560:1986) |
DIN ISO 857-1-2002 |
焊接和相关工艺.词汇.第1部分:金属焊接工艺 |
(Welding and allied processes - Vocabulary - Part 1: Metal welding processes (ISO 857-1:1998)) |
DIN ISO 8573-1-1995 |
一般用途压缩空气.第1部件:杂志和质量等级 |
(Compressed air for general use - Part 1: Contaminants and quality classes; identical with ISO 8573-1:1991) |
DIN ISO 8575-1998 |
航空和航天.流体系统.液压系统管道 |
(Aerospace - Fluid systems - Hydraulic system tubing (ISO 8575:1990)) |
DIN ISO 8576-2002 |
光和光学仪器.显微镜.偏振光显微镜系统 |
(Optics and optical instruments - Microscopes - Reference system of polarized light microscopy (ISO 8576:1996)) |
DIN ISO 8577-2001 |
光学和光学仪器.显微镜.滤光镜 |
(Optics and optical instruments - Microscopes - Spectral filters (ISO 8577:1997)) |
DIN ISO 8578-2003 |
光学和光学仪器.显微镜.物镜和目镜的标记 |
(Optics and optical instruments - Microscopes - Marking of objectives and eyepieces (ISO 8578:1997 + ISO 8578:1997/Cor. 1:2002)) |
DIN ISO 8583-1988 |
银行原始电报卡.互换电报说明.金融交易内涵 |
(Bank card originated messages; interchange message specifications; content for financial transactions; identical with ISO 8583:1987) |
DIN ISO 8600-1-2000 |
光学和光学仪器.医用内窥镜和内窥镜附件.第1部分:一般要求 |
(Optics and optical instruments - Medical endoscopes and endoscopic accessories - Part 1: General requirements (ISO 8600-1:1997)) |
DIN ISO 8600-3-2001 |
光学和光学仪器.医用内窥镜和内窥镜附件.第3部分:视野测定和光学内窥镜观测方向的测定 |
(Optics and optical instruments - Medical endoscopes and endoscopic accessories - Part 3: Determination of field of view and direction of view of endoscopes with optics (ISO 8600-3:1997)) |
DIN ISO 8600-3-2004 |
光学和光学仪器.医用内窥镜和内窥镜附件.第3部分:光学内窥镜观察方向和观察区域的测定 |
|
DIN ISO 8600-4-2001 |
光学和光学仪器.医用内窥镜和内窥镜附件.第4部分:插入部分最大宽度的测定 |
(Optics and optical instruments - Medical endoscopes and endoscopic accessories - Part 4: Determination of maximum width of insertion portion (ISO 8600-4:1997)) |
DIN ISO 8613-1-1991 |
信息处理系统.文件处理和通讯.办公文件体系结构和互换格式.第1部分:前言和一般原理 |
(Information processing systems; text and office systems; office document architecture (ODA) and interchange format; part 1: introduction and general principles; identical with ISO 8613-1:1989) |
DIN ISO 8613-2-1991 |
信息处理系统.文件处理和通讯.办公文件体系结构和互换格式.第2部分:文件结构 |
(Information processing systems; text and office systems; office document architecture (ODA) and interchange format; part 2: document structures; identical with ISO 8613-2:1989) |
DIN ISO 8613-4-1991 |
信息处理系统.文件处理和通讯.办公文件体系结构和互换格式.第4部分:文件提问档 |
(Information processing; text and office systems; Office Document Architecture (ODA) and interchange format; part 4: document profile; identical with ISO 8613-4:1989) |
DIN ISO 8614-1998 |
滑雪板装配.词汇 |
(Ski bindings - Vocabulary (ISO 8614:1997)) |