标准号 |
中文名称 |
英文名称 |
| DIN EN 13648-3-2003 |
低温容器.防超压安全装置.第3部分:规定的排放量、容量和尺寸测量 |
(Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge; Capacity and sizing; German version EN 13648-3:2002) |
| DIN EN 13649-2002 |
固定源辐射.单个气态有机化合物质量浓度的测定.活性炭和溶剂解吸法 |
(Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method; German version EN 13649:2001) |
| DIN EN 1365-1-1999 |
支承部件的防火检验.第1部分:墙 |
(Fire resistance tests on loadbearing elements - Part 1: Walls; German version EN 1365-1:1999) |
| DIN EN 1365-2-2000 |
支承部件的防火试验.第2部分:楼板和屋顶 |
(Fire resistance tests for loadbearing elements - Part 2: Floors and roofs; German version EN 1365-2:1999) |
| DIN EN 1365-3-2000 |
支承部件的防火试验.第3部分:梁 |
(Fire resistance tests for loadbearing elements - Part 3: Beams; German version EN 1365-3:1999) |
| DIN EN 1365-4-1999 |
支承部件的防火检验.第4部分:支柱 |
(Fire resistance tests on loadbearing elements - Part 4: Columns; German version EN 1365-4:1999) |
| DIN EN 1365-5-2005 |
承重部件的防火试验.第5部分:阳台和过道 |
|
| DIN EN 1365-6-2005 |
承重部件的防火试验.第6部分:楼梯 |
|
| DIN EN 13650-2002 |
土壤改良和生长介质.王水可溶素的萃取 |
(Soil improvers and growing media - Extraction of aqua regia soluble elements; German version EN 13650:2001) |
| DIN EN 13651-2002 |
土壤改良和生长介质.氯化钙/DTPA(CAT)可溶养料的萃取 |
(Soil improvers and growing media - Extraction of calcium chloride/DTPA (CAT) soluble nutrients; German version EN 13651:2001) |
| DIN EN 13652-2002 |
土壤改良和生长介质.水溶养料和素的萃取 |
(Soil improvers and growing media - Extraction of water soluble nutrients and elements; German version EN 13652:2001) |
| DIN EN 13653-2004 |
防水用柔性薄板.车辆通行用混凝土桥板和其他混凝土表面的防水.剪切强度的测定 |
|
| DIN EN 13654-1-2002 |
土壤改良和生长介质.氮的测定.第1部分:改良的基耶达尔法 |
(Soil improvers and growing media - Determination of nitrogen - Part 1: Modified Kjeldahl method; German version EN 13654-1:2001) |
| DIN EN 13654-2-2002 |
土壤改良和生长介质.氮的测定.第2部分:杜马法 |
(Soil improvers and growing media - Determination of nitrogen - Part 2: Dumas method; German version EN 13654-2:2001) |
| DIN EN 13655-2003 |
塑料.农业和园艺用热塑性塑料薄膜覆盖物 |
(Plastics - Mulching thermoplastic films for use in agriculture and horticulture; German version EN 13655:2002) |
| DIN EN 13656-2003 |
废弃物的表征.废弃物中素的连续测定用微波辅助的氢氟酸、硝酸和盐酸混合物的分解 |
(Characterization of waste - Microwave assisted digestion with hydrofluoric (HF), nitric (HNO) and hydrochloric (HCl) acid mixture for subsequent determination of elements in waste; German version EN 13656:2002) |
| DIN EN 13657-2003 |
废弃物特征.废物中素的王水可溶性部分连续测定用发酵法 |
(Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements in waste; German version EN 13657:2002) |
| DIN EN 13658-1-2005 |
金属板条和压条.定义、要求和试验方法.第1部分:内部抹灰 |
|
| DIN EN 13658-2-2005 |
金属板条和压条.定义、要求和试验方法.第2部分:外部粉刷 |
|
| DIN EN 13659-2004 |
遮板.包括安全的性能要求 |
|
| DIN EN 1366-1-1999 |
设备安装的防火检验.第1部分:管道 |
(Fire resistance tests on service installations - Part 1: Ducts; German version EN 1366-1:1999) |
| DIN EN 1366-2-1999 |
设备安装的防火检验.第2部分:防火盖 |
(Fire resistance tests on service installations - Part 2: Fire dampers; German version EN 1366-2:1999) |
| DIN EN 1366-3-2004 |
辅助设施的防火检验.第3部分:渗透封装 |
|
| DIN EN 1366-6-2005 |
辅助设施的防火试验.第6部分:架空通道和空心楼板 |
|
| DIN EN 1366-7-2004 |
辅助设施的防火检验.第7部分:传送系统及其隔板 |
|
| DIN EN 1366-8-2004 |
服务设施的防火检验.第8部分:排烟管道 |
|
| DIN EN 1367-1-2000 |
集料的热性能和抗风化性能的试验.第1部分:冻结和解冻阻力的测定 |
(Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing; German version EN 1367-1:1999) |
| DIN EN 1367-2-1998 |
岩石颗粒的热性能和风化性能的试验方法.第2部分:硫酸镁法 |
(Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test; German version EN 1367-2:1998) |
| DIN EN 1367-3 Berichtigung 1-2004 |
对DIN EN 1367-3-2001的勘误 |
|
| DIN EN 1367-3-2001 |
集料的热性能和抗风化性能的试验.第3部分:煮沸试验 |
(Tests for thermal and weathering properties of aggregates - Part 3: Boiling test for “Sonnenbrand basalt“; German version EN 1367-3:2001) |
| DIN EN 1367-4-1998 |
岩石颗粒的热性能和风化性能的试验方法.第4部分:干缩的测定 |
(Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage; German version EN 1367-4:1998) |
| DIN EN 1367-5-2002 |
集料的热性能和抗风化性能的试验.第5部分:测定抗热振动力 |
(Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock; German version EN 1367-5:2002) |
| DIN EN 13672-2004 |
运动场表面.非填充合成草皮的耐磨性测定 |
|
| DIN EN 13673-1-2003 |
气体和蒸气的最大爆炸压力和最大压升的测定.第1部分:最大爆炸压力的测定 |
(Determination of the maximum explosion pressure and the maximum pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure; German version EN 13673-1:2003) |
| DIN EN 13673-2-2005 |
气体和蒸气的最大爆炸压力和最大压升速率的测定.第2部分:最大压升爆炸速率的测定.德文版本EN 13673-2-2005 |
|
| DIN EN 13675-2004 |
机械安全.管成形、辊轧及其精整线设备的安全要求 |
|
| DIN EN 13676-2001 |
与食品接触的聚合物涂覆的纸和纸板.针孔的检测 |
(Polymer coated paper and board intended for food contact - Detection of pinholes; German version EN 13676:2001) |
| DIN EN 13677-1-2003 |
增强的热塑性模塑复合材料.GMT规范.第1部分:名称与符号 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation; German version EN 13677-1:2003) |
| DIN EN 13677-2-2003 |
增强的热塑性模塑复合材料.GMT规范.第2部分:试验方法和一般要求 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements; German version EN 13677-2:2003) |
| DIN EN 13677-3-2003 |
增强的热塑性模塑复合材料.GMT规范.第3部分:特殊要求 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements; German version EN 13677-3:2003) |
| DIN EN 13683-2004 |
园艺机具.整体动力粉碎机/削片机.安全 |
|
| DIN EN 13684-2004 |
园艺设备.可在侧面控制的草坪通气机和松土机.安全 |
|
| DIN EN 13687-1-2002 |
混凝土结构的保护和检修用产品和设备.试验方法.热相容性测定.第1部分:用防冻盐浸泡的冻融循环 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion; German version DIN EN 13687-1:2002) |
| DIN EN 13687-2-2002 |
混凝土结构的保护和检修用产品和设备.试验方法.热相容性测定.第2部分:雷雨循环(热冲击) |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock); German version EN 13687-2:2002) |
| DIN EN 13687-3-2002 |
混凝土结构的保护和检修用产品和设备.试验方法.热相容性测定.第3部分:无防冻盐冲击的热循环 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact; German version EN 13687-3:2002) |
| DIN EN 13687-4-2002 |
混凝土结构的防护和检修用产品和设备.试验方法.热适应性的测定.第4部分:干热循环试验 |
(Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling; German Version EN 13687-4:2002) |
| DIN EN 13687-5-2002 |
混凝土结构的防护和检修用产品和设备.试验方法.热适应性的测定.第5部分:耐温度冲击性 |
(Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 5: Resistance to temperature shock; German version EN 13687-5:2002) |
| DIN EN 1369-1997 |
铸造.磁粉检验 |
(Founding - Magnetic particle inspection; German version EN 1369:1996) |
| DIN EN 13693-2004 |
预制混凝土产品.特殊屋顶组件 |
|
| DIN EN 13697-2002 |
化学消毒剂和防腐变剂.食品、工业、家庭和研究所范围内使用的化学消毒剂的杀菌和/或杀真菌性能评定用定量无 |
(Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical desinfectants used in food, industrial, domestic and institutional areas - Test method and requirement |
| DIN EN 13698-1-2004 |
托盘生产规范.第1部分:800mmx1200mm木制平托盘的制作规范 |
(Pallet production specification - Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets; German version EN 13698-1:2003) |
| DIN EN 13698-1-2004 |
托盘生产规范.第1部分:800 mm x 1200 mm木制平托盘的制作规范 |
|
| DIN EN 13698-2-2004 |
托盘生产规范.第2部分:1000mmx1200mm木制平托盘的制作规范 |
(Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets; German version EN 13698-2:2003) |
| DIN EN 13698-2-2004 |
托盘生产规范.第2部分:1000 mm x 1200 mm木制平托盘的制作规范 |
|
| DIN EN 137-1993 |
呼吸保护装置.压缩空气容器装置(压缩空气呼吸器).要求、检验、标识 |
(Respiratory protective devices; self-contained open-circuit compressed air breathing apparatus; requirements, testing, marking; German version EN 137:1993) |
| DIN EN 1370-1997 |
铸造.用标准试样对比检验表面粗糙度 |
(Founding - Surface roughness inspection by visualtactile comparators; German version EN 1370:1996) |
| DIN EN 137000-1998 |
总规范.电动机运行用带液态电介质的铝电介质交流电压电容器 |
(Generic specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors; German version EN 137000:1997) |
| DIN EN 13701-2002 |
航空航天.航空系统.术语词汇 |
(Aerospace - Space systems - Glossary of terms; Trilingual version EN 13701:2001) |
| DIN EN 13702-1-2004 |
沥青和沥青粘合剂.改性沥青动态粘度的测定.第1部分:圆锥和平板法 |
|
| DIN EN 13702-2-2004 |
沥青和沥青粘合剂.改性沥青动态粘度的测定.第2部分:同轴圆柱法 |
|
| DIN EN 13703-2004 |
沥青和沥青粘合剂.变形能的测定 |
|
| DIN EN 13704-2002 |
化学消毒剂.食品、工业、家庭和研究单位用化学消毒剂的杀孢子活性评定用定量悬浮试验.试验方法和要求(阶段2 |
() |
| DIN EN 13705-2004 |
热塑性材料的焊接.热气焊机械和设备(包括挤焊) |
|
| DIN EN 13706-1-2003 |
增强塑料复合材料.挤拉制型材规范.第1部分:命名 |
(Reinforced plastic composites - Specification for pultruded profiles - Part 1: Designation; German version EN 13706-1:2002) |
| DIN EN 13706-2-2003 |
增强塑料复合材料.挤拉制型材规范.第2部分:试验方法和一般要求 |
(Reinforced plastic composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements; German version EN 13706-2:2002) |
| DIN EN 13706-3-2003 |
增强塑料复合材料.挤拉制型材规范.第3部分:特殊要求 |
(Reinforced plastic composites - Specifications for pultruded profiles - Part 3: Specific requirements; German version EN 13706-3:2002) |
| DIN EN 13707-2005 |
防水用柔性薄板.屋顶防水用增强沥青薄板.定义和特性 |
|
| DIN EN 13708-2002 |
食品.用电子自旋共振光谱法检验经辐照的食品 |
(Foodstuffs - Detection of irradiated food containing crystalline sugar by ESR-spectroscopy; German version EN 13708:2001) |
| DIN EN 13709-2003 |
工业用阀.钢制球阀、球状截止阀和止回阀 |
(Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002) |
| DIN EN 1371-1-1997 |
铸造业.探伤检验.第1部分:砂型铸件.重力金属铸件.低压金属铸件 |
(Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings; German version EN 1371-1:1997) |
| DIN EN 1371-2-1998 |
铸造业.渗透检验.第2部分:精密铸件 |
(Founding - Liquid penetrant inspection - Part 2: Investment castings; German version EN 1371-2:1998) |
| DIN EN 137100-1998 |
分规范.电动机启动用带液态电介质的铝电介质交流电压电容器.结构类型识别 |
(Sectional specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 13710:1997) |
| DIN EN 137101-1998 |
空白详细规范.电动机启动用带液态电介质的铝电介质交流电压电容器.结构类型识别 |
(Blank detail specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 137101:1995) |
| DIN EN 13711-2002 |
内河导航船舶.船舶运行用绞车的安全要求 |
(Inland navigation vessels - Winches for ship operation - Safety requirements; German version EN 13711:2002) |
| DIN EN 13716-2003 |
表面活性剂.基本氮总量的测定.电势滴定法 |
(Surface active agents - Determination of total base nitrogen - Potentiometric titration; German version EN 13716:2001) |
| DIN EN 13717-2003 |
表面活化剂.测定一级、二级和三级氨基氮.电位测量滴定法 |
(Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration; German version EN 13717:2002) |
| DIN EN 13718-1-2002 |
空气、水和难以通行地带的救护.第1部分:病人治疗连续性所需医疗器具接口要求 |
(Air, water and difficult terrain ambulances - Part 1: Medical device interface requirements for the continuity of patient care; German version EN 13718-1:2002) |
| DIN EN 13718-2-2002 |
空气、水和难以通行地带的救护.第2部分:病人治疗连续性所需手术和技术要求 |
(Air, water and difficult terrain ambulances - Part 2: Operational and technical requirements for the continuity of patient care; German version EN 13718-2:2002) |
| DIN EN 13719 Berichtigung 1-2005 |
土工织物及其相关产品.与土工合成阻挡层接触的土工织物长期保护效果的测定.DIN EN 13719-2002的勘误 |
|
| DIN EN 13719-2002 |
土工织物和土工织物有关产品.与土工合成屏障接触的土工织物长期保护效能的测定 |
(Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers; German version EN 13719:2002) |
| DIN EN 1372-1999 |
胶粘剂.地板覆盖物和墙壁涂层用胶粘剂的试验方法 |
(Adhesives - Test method for adhesives for floor and wall coverings - Peel test; German version EN 1372:1999) |
| DIN EN 13720-2002 |
可运输储气瓶.乙炔气瓶蓄电池设备装填条件 |
(Transportable gas cylinders - Filling conditions for acetylene cylinder battery vehicles; German version EN 13720:2002) |
| DIN EN 13721-2004 |
家具.表面反射的评估 |
|
| DIN EN 13722-2004 |
家具.表面光泽度的评估 |
|
| DIN EN 13723-2002 |
石油产品.汽油中低铅含量的测定.波长色散X射线荧光光谱法 |
(Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF); German version EN 13723:2002) |
| DIN EN 13724-2003 |
邮政业务.私人信箱和信箱投信口金属板缝隙的要求和试验方法 |
(Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods; German version EN 13724:2002) |
| DIN EN 13725-2003 |
空气质量.用动态气味测定法测定气味浓度 |
(Air quality - Determination of odour concentration by dynamic olfactometry; German version EN 13725:2003) |
| DIN EN 13726-1-2002 |
主要伤口敷料试验方法.第1部分:吸收度 |
(Test methods for primary wound dressings - Part 1: Aspects of absorbency; German version EN 13726-1:2002) |
| DIN EN 13726-2-2002 |
主要伤口敷料试验方法.第2部分:可渗透薄膜敷料湿气蒸发传输率 |
(Test methods for primary wound dressings - Part 2: Moisture vapour transmission rate of permeable film dressings; German version EN 13726-2:2002) |
| DIN EN 13726-3-2003 |
非放射性医疗器械.主要伤口敷料试验方法.第3部分:防水性 |
(Non-active medical devices - Test methods for primary wound dressings - Part 3: Waterproofness; German version EN 13726-3:2003) |
| DIN EN 13726-4-2003 |
非放射性医疗器械.主要伤口敷料试验方法.第4部:符合性 |
(Non-active medical devices - Test methods for primary wound dressings - Part 4: Conformability; German version EN 13726-4:2003) |
| DIN EN 13726-6-2003 |
非放射性医疗器械.主要伤口敷料试验方法.第6部分:气味控制 |
(Non-active medical devices - Test methods for primary wound dressings - Part 6: Odour control; German version EN 13726-6:2003) |
| DIN EN 13727-2004 |
化学消毒剂和防腐剂.医疗器械用化学消毒剂的杀菌作用评价用定量悬浮试验.试验方法和要求(第2阶段第1步) |
|
| DIN EN 1373-1999 |
胶粘剂.地板及墙壁铺面用胶粘剂的检验方法.剪切试验 |
(Adhesives - Test methods for adhesives for floor and wall coverings - Shear test; German version EN 1373:1999) |
| DIN EN 13732-2003 |
食品加工机械.农家散装奶冷却器.使用、安全和卫生用结构、性能和适用性要求 |
(Food processing machinery - Bulk milk coolers on farms - Requirements for construction, performance, suitability for use, safety and hygiene; German version EN 13732:2002) |
| DIN EN 13733-2002 |
混凝土构件的修补和保护用产品和系统.试验方法.结构搭接耐久力的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of the durability of structural bonding; German version EN 13733:2002) |
| DIN EN 13736-2003 |
机床安全.气动压力机 |
(Safety of machine tools - Pneumatic presses; German version EN 13736:2003) |
| DIN EN 13738-2005 |
土工织物和土工织物相关产品.土壤中拔出阻力的测定 |
|
| DIN EN 13739-1-2003 |
农业机械.固体肥料撒播机和全幅撒肥机.环境保护.第1部分:要求 |
(Agricultural machinery - Solid fertilizer broadcasters and full-width distributors; Environmental protection - Part 1: Requirements; German version EN 13739-1:2003) |
| DIN EN 13739-2-2003 |
农业机械.固体肥料撒播机和全幅撒肥机.环境保护.第2部分:试验方法 |
(Agricultural machinery - Solid fertilizer broadcasters and full-width distributors; Environmental protection - Part 2: Test methods; German version EN 13739-2:2003) |
| DIN EN 1374-2000 |
农业机械.圆筒仓用筒仓固定卸载机 |
(Agricultural machinery - Silos stationary unloaders for round silos - Safety; German version EN 1374:2000) |
| DIN EN 13740-1-2003 |
农用机械.固体肥料分行施肥机.环保.第1部分:要求 |
(Agricultural machinery - Solid fertilizer line-distributors; Environmental protection - Part 1: Requirements; German version EN 13740-1:2003) |
| DIN EN 13740-2-2003 |
农用机械.固体肥料分行施肥机.环保.第2部分:试验方法 |
(Agricultural machinery - Solid fertilizer line-distributors; Environmental protection - Part 2: Test methods; German version EN 13740-2:2003) |
| DIN EN 13741-2004 |
机械干燥系列潮湿冷却塔的热性能验收试验 |
|
| DIN EN 13742-1-2005 |
灌溉技术.固定式喷水系统.第1部分:选择、设计、规划和安装 |
|
| DIN EN 13742-2-2005 |
灌溉技术.整体设置喷水系统.第2部分:试验方法 |
|
| DIN EN 13743-2002 |
涂覆磨料的安全要求 |
(Safety requirements for coated abrasives; German version EN 13743:2001) |
| DIN EN 13744-2005 |
运动场表面.通过在热水中浸渍的加速老化规程 |
|
| DIN EN 13745-2004 |
运动区域用表面.镜面反射率的测定 |
|
| DIN EN 13746-2004 |
运动场表面.由于水、霜和热条件的变化而引起的尺寸变化的测定 |
|
| DIN EN 13748-1-2004 |
水磨石砖.第1部分:内部用水磨石砖 |
|
| DIN EN 1375-2003 |
识别卡系统.交叉集成电路卡附加格式.ID-000卡尺寸和物理特性 |
(Identification card systems - Intersector integrated circuit(s) card additional formats - ID-000 card size and physical characteristics; German version EN 1375:2002) |
| DIN EN 13750-2003 |
暖炉、炊具或炉架上用家用水壶.定义、要求和试验方法 |
(Domestic water kettles for use on top of stove, cooker or hob - Definitions, requirements and test methods; German version EN 13750:2002) |
| DIN EN 13751-2002 |
食品.用光致发光法探测辐照过的食品 |
(Foodstuffs - Detection of irradiated food using photostimulated luminescence; German version EN 13751:2002) |
| DIN EN 13752-2003 |
饮用水处理用产品.二氧化锰 |
(Products used for treatment of water intended for human consumption - Manganese dioxide; German version EN 13752:2003) |
| DIN EN 13753-2003 |
生活用水的水处理用品.粒状活性铝氧土 |
(Products used for treatment of water intended for human consumption - Granular activated alumina; German version EN 13753:2002) |
| DIN EN 13754-2003 |
生活用水处理用产品.膨润土 |
(Products used for treatment of water intended for human consumption - Bentonite; German version EN 13754:2003) |
| DIN EN 13755 Berichtigung 1-2004 |
DIN EN 13755-2002的技术勘误 |
|
| DIN EN 13755-2002 |
天然石料试验方法.大气压下吸水性的测定 |
(Natural stone test methods - Determination of water absorption at atmospheric pressure; German version EN 13755:2001) |
| DIN EN 13756-2003 |
木地板.术语 |
(Wood flooring - Terminology; Trilingual version EN 13756:2002) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com