标准号 |
中文名称 |
英文名称 |
| DIN EN 302404-2004 |
数字蜂窝式远程通信系统(2+相位).GSM无线电话系统(CTS)(相位1).CTS无线接口的较低层.第2阶段 |
|
| DIN EN 302405-2003 |
数字蜂窝式远程通信系统(2+相位).GSM无线电话系统(CTS),相位1.CTS结构描述.第2段 |
(Digital cellular telecommunications system (Phase 2+) (GSM) - GSM Cordless telephony system (CTS), Phase 1 - CTS Architecture description; Stage 2 (GSM 03.56 version 7.1.1 Release 1998) (Endorsement of the English version EN 302405 V 7.1.1 (2000-08) as G |
| DIN EN 302406-2003 |
数字蜂窝式远程通信系统(2+相位).GSM无线电话系统(CTS),相位1.CTS无线接口层3规范 |
(Digital cellular telecommunications system (Phase 2+) - GSM Cordless Telephony System (CTS), Phase 1 - CTS radio interface layer 3 specification (GSM 04.56 version 7.1.1 Release 1998) (Endorsement of the English version EN 302406 V 7.1.1 (2000-08) as Ger |
| DIN EN 302406-2004 |
数字蜂窝式远程通信系统(2+相位).GSM无线电话系统(CTS)(相位1).CTS无线接口层3规范 |
|
| DIN EN 302407-2003 |
数字蜂窝式远程通信系统(2+相位).GSM无线电话系统(CTS),相位1.CTS监督系统层3规范 |
(Digital cellular telecommunications system (Phase 2+) - GSM Cordless Telephony System (CTS), Phase 1 - CTS supervising system layer 3 specification (GSM 04.57 version 7.0.3 Release 1998) (Endorsement of the English version EN 302407 V 7.0.3 (2000-08) as |
| DIN EN 302407-2004 |
数字蜂窝式远程通信系统(2+相位).GSM无线电话系统(CTS)(相位1).CTS监督系统层3规范 |
|
| DIN EN 302408-2003 |
数字蜂窝式远程通信系统(2+相位).GSM无线电话系统(CTS),相位1.CTS-FP无线子系统 |
(Digital cellular telecommunications system (Phase 2+) - GSM Cordless Telephony System (CTS), Phase 1 - CTS-FP Radio subsystem (GSM 05.56 version 7.1.1 Release 1998) (Endorsement of the English version EN 302408 V 7.1.1 (2000-08) as German standard)) |
| DIN EN 302408-2004 |
数字蜂窝式远程通信系统(2+相位).GSM无线电话系统(CTS)(相位1).CTS-FP无线电子系统 |
|
| DIN EN 302409-2003 |
数字蜂窝式远程通信系统(2+相位).固定部件和移动站用无线电话系统用户身份模块规范 |
(Digital cellular telecommunications system (Phase 2+) - Specification of the cordless telephony system subscriber identity module for both fixed part and mobile station (GSM 11.19 version 7.0.3 Release 1998) (Endorsement of the English version EN 302409 |
| DIN EN 3026-1994 |
航空和航天.干润滑膜的检验方法.钢试样的腐蚀试验 |
(Aerospace series; test method for dry film lubricants; corrosion test on steels specimens; German version EN 3026:1994) |
| DIN EN 302646-1-2001 |
综合业务数字网(ISDN).信号系统No.7.数字蜂窝通信系统.ISDN公共地面移动网信号接口的ISDN用户部分的应用版 |
(Integrated Services Digital Network (ISDN) - Signalling System No. 7; Digital cellular telecommunications system (Phase 2+); Application of ISDN User Part (ISUP) version 3 for the ISDN-Public Land Mobile Network (PLMN) signalling interface - Part 1: Prot |
| DIN EN 302646-2-2001 |
综合业务数字网(ISDN).信号系统No.7.数字蜂窝通信系统.ISDN公共地面移动网信号接口的ISDN用户部分的应用版 |
(Integrated Services Digital Network (ISDN) - Signalling System No. 7 (SS7); Digital cellular telecommunications system (Phase 2+); Application of ISDN User Part (ISUP) version 3 for the ISDN-Public Land Mobile Network (PLMN) signalling interface - Part 2 |
| DIN EN 302646-3-2001 |
综合业务数字网(ISDN).信号系统No.7.数字蜂窝通信系统.ISDN公共地面移动网信号接口的ISDN用户部分的应用版 |
(Integrated Services Digital Network (ISDN); Signalling System No. 7 (SS7) - Digital cellular telecommunications system (Phase 2+); Application of ISDN User Part (ISUP) version 3 for the ISDN-Public Land Mobile Network (PLMN) signalling interface - Part 3 |
| DIN EN 302646-4-2001 |
综合业务数字网(ISDN).信号系统No.7.数字蜂窝通信系统.ISDN公共地面移动网信号接口的ISDN用户部分的应用版 |
(Integrated Services Digital Network (ISDN) - Signalling System No. 7 (SS7); Digital cellular telecommunications system (Phase 2+); Application of ISDN User Part (ISUP) version 3 for the ISDN-Public Land Mobile Network (PLMN) signalling interface - Part 4 |
| DIN EN 3027-1994 |
航空和航天.干润滑膜的检验方法.盐雾试验 |
(Aerospace series; test method for dry film lubricants; salt spray test; German version EN 3027:1994) |
| DIN EN 302842-2-2005 |
电磁兼容性和无线电频谱情况(ERM).VHF空对地和空对空数字链接(VDL)模式4无线电设备.航空移动设备的技术特性和测量方法.第2部分:一般描述和数据链路层 |
|
| DIN EN 303-1-1999 |
采暖锅炉.第1部分:带鼓风机喷嘴的采暖锅炉.术语,一般要求,检验和标识 |
(Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking; German version EN 303-1:1999) |
| DIN EN 303-2-1998 |
采暖锅炉.带鼓风机喷嘴的采暖锅炉.第2部分:对带油雾化喷嘴的采暖锅炉的特殊要求 |
(Heating boilers - Part 2: Heating boilers with forced draught burners; special requirements for boilers with atomizing oil burners; German version EN 303-2:1998) |
| DIN EN 303-3-1999 |
采暖锅炉.第3部分:燃气材料用中央采暖锅炉.锅炉和鼓风机喷嘴的组装 |
(Heating boilers - Part 3: Gas-fired central heating boilers; assembly comprising a boiler body and a forced draught burner; German version EN 303-3:1998) |
| DIN EN 303-3-2004 |
采暖锅炉.第3部分:燃气中央采暖锅炉.包括锅炉体和强制通风燃烧器的组装 |
|
| DIN EN 303-4-1999 |
采暖锅炉.第4部分:用鼓风机喷嘴的采暖锅炉.功率70kV以下,最大工作压力3巴,用油鼓风机喷嘴的采暖锅炉用特殊 |
(Heating boilers - Part 4: Heating boilers with forced draught burners; special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar; terminology, special requirements, testing and mar |
| DIN EN 303-5-1999 |
采暖锅炉.第5部分:用固体燃料,手动和自动填料燃烧,额定热功率300kW以下的采暖锅炉.概念,要求,检验和标识 |
(Heating boilers - Part 5: Heating boilers for solid fuels, hand and automatically stocked, nominal heat output of up to 300 kW - Terminology, requirements, testing and marking; German version EN 303-5:1999) |
| DIN EN 303-6-2000 |
采暖锅炉.第6部分:带有强制通风燃烧器的采暖锅炉.带有标准热输入功率不超过70kV的自动燃油炉的分节锅炉的民 |
(Heating boilers - Part 6: Heating boilers with forced draught burners; specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW; German version EN 303-6:2000) |
| DIN EN 3030-1994 |
航空和航天.干润滑膜的检验方法.固体含量 |
(Aerospace series; test method for dry film lubricants; solids content; German version EN 3030:1994) |
| DIN EN 303035-1-2003 |
地面无线中继线路(TETRA).根据R&TTE指令的3.2条款包括基本要求的TETRA设备用统一的EN.第1部分:声音加数据(V |
(Terrestrial Trunked Radio (TETRA) - Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE Directive - Part 1: Voice plus Data (V+D) (Endorsement of the English version EN 303035-1 V 1.1.1 (2001-06) as German sta |
| DIN EN 303035-1-2004 |
地面集群无线电系统(TETRA).包括R&TTE指令3.2条款中基本要求的TETRA设备用协调的EN.第1部分:声音加数据(V+D) |
|
| DIN EN 303035-2-2003 |
地面无线中继线路(TETRA).根据R&TTE指令的3.2条款包括基本要求的TETRA设备用统一的EN.第2部分:直接模式操作 |
(Terrestrial Trunked Radio (TETRA) - Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE Directive - Part 2: Direct Mode Operation (DMO) (Endorsement of the English version EN 303035-2 V 1.1.1 (2001-06) as Germ |
| DIN EN 303035-2-2004 |
地面集群无线电系统(TETRA).包括R&TTE指令3.2条款中基本要求的TETRA设备用协调的EN.第2部分:直接模式操作(DMO) |
|
| DIN EN 3032-1994 |
航空和航天.干润滑膜的检验方法.厚度测量 |
(Aerospace series; test method for dry film lubricants; thickness measurement; German version EN 3032:1994) |
| DIN EN 3035-1996 |
航空和航天.合金钢制镀镉短螺纹带翼型十字槽的100度沉头配合螺钉.等级:1100MPa(室温下)/235℃ |
(Aerospace series - 100 countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa(at ambient temperature)/235 C; German version EN 3035:1996) |
| DIN EN 3037-1996 |
航空和航天.钛合金钢制阳极处理MoS锻造短螺纹带翼型十字槽的平头配合螺钉.等级:1100MPa(室温下)/315℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized MoS lubricated - Classification: 1100 MPa(at ambient temperature)/315 C; German version EN 3037:1996) |
| DIN EN 3038-1996 |
航空和航天.耐蚀耐高温钢制钝化处理短螺纹带翼型十字槽的平头配合螺钉.等级:1100MPa(室温下)/425℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3038:1996) |
| DIN EN 304-1998 |
采暖锅炉.带油雾化喷嘴的采暖锅炉用检验规则(包括98年更改A1) |
(Heating boilers - Test code for heating boilers for atomizing oil burners (includes Amendment A1:1998); German version EN 304:1992 + A1:1998) |
| DIN EN 304-2004 |
采暖锅炉.带雾化油燃烧器的采暖锅炉用检验规则 |
(Heating boilers - Test code for heating boilers for atomizing oil burners (includes Amendments A1:1998 + A2:2003); German version EN 304:1992 + A1:1998 + A2:2003) |
| DIN EN 304-2004 |
采暖锅炉.带雾化油燃烧器的采暖锅炉用检验规则 |
|
| DIN EN 3042-1992 |
航空和航天.质量保证.航空航天业的EN产品.评定方法 |
(Aerospace series; quality assurance, EN aerospace products; qualification procedure; german version EN 3042:1991) |
| DIN EN 3044-1998 |
航空和航天.自锁,金属丝螺纹组件用安装孔,结构标准 |
(Aerospance series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard; German version EN 3044:1998) |
| DIN EN 3048-1992 |
航空和航天.室温条件下高负荷、轻系列、带自动润滑层的耐蚀钢关节轴承.尺寸和负载 |
(Aerospace series; bearings, spherical plain in corrosion resisting steel with self-lubricating liner, light series, elevated loads at ambient temperature; dimensions and loads; german version EN 3048:1992) |
| DIN EN 3049-1998 |
航空和航天.低压力变形氟碳橡胶(FKM)制O型环.硬度80IRHD(国际橡胶硬度标度) |
(Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998) |
| DIN EN 305-1997 |
热交换器.功率测定检验用的概念和一般规定 |
(Heat exchangers - Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers; German version EN 305:1997) |
| DIN EN 3050-1998 |
航空和航天.低压力变形氟碳橡胶(FKM)制O型环.交货技术条件 |
(Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification; German version EN 3050:1998) |
| DIN EN 3052-1994 |
航空和航天.短螺纹耐热耐蚀钢制钝化六角配合螺栓.等级:1100MPa(室温)/425摄氏度 |
(Aerospace series; bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 C (includes amendment A1:1993); German version EN 3052:19 |
| DIN EN 3053-1994 |
航空和航天.飞机用轴承.钢制单列球面轴承.尺寸和负载 |
(Aerospace series; bearings; airframe rolling, single row self-aligning roller bearings in steel; dimensions and loads; German version EN 3053:1994) |
| DIN EN 3054-1994 |
航空和航天.飞机用轴承.镀铬钢单列球面轴承.尺寸和负载 |
(Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in steel, cadmium plated; dimensions and loads; German version EN 3054:1994) |
| DIN EN 3055-1994 |
航空和航天.飞机用轴承.不锈钢单列球面轴承.尺寸和负载 |
(Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in corrosion resisting steel; dimensions and loads; German version EN 3055:1994) |
| DIN EN 3056-1994 |
航空和航天.飞机用轴承.钢制双列向心球轴承.尺寸和负载 |
(Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel; dimensions and loads; German version EN 3056:1994) |
| DIN EN 3057-1994 |
航空和航天.飞机用轴承.镀铬钢双列向心球轴承.尺寸和负载 |
(Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel, cadmium plated; dimensions and loads; German version EN 3057:1994) |
| DIN EN 3058-1994 |
航空和航天.飞机用轴承.不锈钢双列向心球轴承.尺寸和负载 |
(Aerospace series; bearings, airframe rolling; rigid double row ball bearings in corrosion resisting steel; dimensions and loads; German version EN 3058:1994) |
| DIN EN 306-1997 |
热交换器.功率测定用测定和测量精度 |
(Heat exchangers - Methods of measuring the parameters necessary for establishing the performance; German version EN 306:1997) |
| DIN EN 3063-1994 |
航空和航天.耐高温钢NI-P101HT(耐热镍基合金)制中螺纹十二角配合螺丝.等级:1210MPa(室温)730摄氏度 |
(Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 C; German version EN 3063:1994) |
| DIN EN 3064-1996 |
航空和航天.锯齿形自锁铆接螺母.装入法 |
(Aerospace series -Shank nuts, self-locking, serrated - Installation procedure; German version EN 3064:1996) |
| DIN EN 3065-1996 |
航空和航天.自锁啮合装入铆接螺母用安装孔.设计标准 |
(Aerospace series - Installation holes for self-locking, serrated shank nuts; design Standard; German version EN 3065:1996) |
| DIN EN 307-1998 |
热交换器.保持所有各种结构热交换器功率用安装和运行指南以及维修说明的制定用导引 |
(Heat exchangers - Guidelines to prepare installation, operating and maintenance instructions required to maintain the performance of each type of heat exchanger; German version EN 307:1998) |
| DIN EN 308-1997 |
热交换器.测定空气/空气和空气/废气热回收设备功率标准的检验方法 |
(Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices; German version EN 308:1997) |
| DIN EN 3081-2002 |
航空航天系列.钛合金管连接件8°30`.带动梁密封端头的修理用焊接箍 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair; German version EN 3081:2001) |
| DIN EN 3082-2004 |
航空航天系列.钛合金管连接件8°30.修理用闷头焊接活接头 |
|
| DIN EN 3083-2004 |
航空航天系列.钛合金管连接件8°30.修理用闷头长焊接端头活接头 |
|
| DIN EN 3084-2004 |
航空航天系列.钛合金管连接件8°30.修理用焊接端头螺纹活接头 |
|
| DIN EN 309-1992 |
刨花板.定义和分级 |
(Particleboards; definition and classification; german version EN 309:1992) |
| DIN EN 30993-3-1994 |
医疗装置生物学评定.第3部分:遗传毒性、致癌力和生殖毒性试验 |
(Biological evaluation of medical devices; part 3: tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:1992); German version EN 30993-3:1993) |
| DIN EN 30993-6-1994 |
医疗装置生物学评定.第6部分:植入后局部作用试验 |
(Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO 10993-6:1994); German version EN 30993-6:1994) |
| DIN EN 31-1999 |
盥洗台.连接尺寸 |
(Pedestal wash basins - Connecting dimensions; German version EN 31:1998) |
| DIN EN 310-1993 |
木材制品.弯曲回弹弹性模量和弯曲强度的测定 |
(Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993) |
| DIN EN 31092-1994 |
纺织品.生理效应.稳态条件下耐热和耐水蒸汽性能的测量 |
(Textiles; physiological effects; measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) (ISO 11092:1993); German version EN 31092:1993) |
| DIN EN 311-2002 |
木质板材.表面坚固性.试验方法 |
(Wood-based panels - Surface soundness - Test method; German version EN 311:2002) |
| DIN EN 3112-1995 |
航空和航天.镀隔合金钢制螺纹接近顶部的六角头螺钉.等级:900MPa(室温下)/235℃ |
(Aerospace series - Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 C; German version EN 3112:1995) |
| DIN EN 312-1-1996 |
木屑板.规范.第1部分:各种板型的一般要求 |
(Particleboards - Specifications - Part 1: General requirements for all board types; German version EN 312-1:1996) |
| DIN EN 312-2-1996 |
木屑板.规范.第2部分:在干躁区用于一般目的板材的要求 |
(Particleboards - Specifications - Part 2: Requirements for general purpose boards for use in dry conditions; German version EN 312-2:1996) |
| DIN EN 312-3-1996 |
木屑板.规范.第3部分:在干躁区用于室内设备(包括家具)的板材的要求 |
(Particleboards - Specifications - Part 3: Requirements for boards for use in interior fitments (including furniture) in dry conditions; German version EN 312-3:1996) |
| DIN EN 312-4-1996 |
木屑板.规范.第4部分:在干躁区用于承重目的板材的要求 |
(Particleboards - Specifications - Part 4: Requirements for load-bearing boards for use in dry conditions; German version EN 312-4:1996) |
| DIN EN 312-5-1997 |
木屑板.规范.第5部分:在潮湿区用于承重目的板材的要求 |
(Particleboards; specifications - Part 5: Requirements for load-bearing boards for use in humid conditions; German version EN 312-5:1997) |
| DIN EN 312-6-1996 |
木屑板.规范.第6部分:在干躁区用于承重目的高负载板的要求 |
(Particleboards - Specifications - Part 6: Requirements for heavy duty load-bearing boards for use in dry conditions; German version EN 312-6:1996) |
| DIN EN 312-7-1997 |
木屑板.规范.第7部分:在潮湿区用于承重目的高负载板的要求 |
(Particleboards; specifications - Part 7: Requirements for heavy duty load-bearing boards for use in humid conditions; German version EN 312-7:19973) |
| DIN EN 31252-1994 |
激光和激光相关设备.激光装置.对文件的最低要求 |
(Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:1993); German version EN 31252:1994) |
| DIN EN 31253-1994 |
激光和激光相关设备.激光装置.机械接口 |
(Lasers and laser related equipment - Laser device - Mechanical interfaces (ISO 11253:1993); German version EN 31253:1994) |
| DIN EN 313-1-1996 |
胶合板.分级和术语.第1部分:分级 |
(Plywood - Classification and terminology - Part 1: Classification; German version EN 313-1:1996) |
| DIN EN 313-2-1999 |
胶合板.分类和术语.第2部分:术语 |
(Plywood - Classification and terminology - Part 2: Terminology; German version EN 313-2:1999) |
| DIN EN 3135-1996 |
航空和航天.耐蚀钢FE-PA11制钝化带通用头的全铆钉.英制系列 |
(Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series; German version EN 3135:1996) |
| DIN EN 3136-1996 |
航空和航天.耐蚀钢FE-PA92HT制钝化带通用头的全铆钉.英制系列 |
(Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series; German version EN 3136:1996) |
| DIN EN 3138-2001 |
航空航天系列.耐腐蚀钢FE-PA2601制钝化英制100度沉头标称凸头的实心铆钉 |
(Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series; German version EN 3138:2001) |
| DIN EN 3139-2001 |
航空航天系列.耐腐蚀钢FE-PA11制钝化英制100度标称沉头的实心铆钉 |
(Aerospace series - Rivets, solid, 100?countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series; German version EN 3139:2001) |
| DIN EN 314-1-1993 |
胶合板.粘合质量.第1部分:第1部分:检验方法 |
(Plywood; bonding quality; part 1: test methods; German version EN 314-1:1993) |
| DIN EN 314-2-1993 |
胶合板.粘合质量.第2部分:要求 |
(Plywood; bonding quality; part 2: requirements; German version EN 314-2:1993) |
| DIN EN 3140-2001 |
航空航天系列.耐腐蚀钢FE-PA2601制钝化英制100度标称沉头的实心铆钉 |
(Aerospace series - Rivets, solid, 100?countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series; German version EN 3140:2001) |
| DIN EN 3141-1996 |
航空和航天.耐高温镍基合金钢NI-P11制镀镉带通用头的全铆钉.英制系列 |
(Aerospace series - Rivets, solid, universal head, in head resisting nickel base alloy NI-P11, cadmium plated, inch based series; German version EN 3141:1996) |
| DIN EN 3142-1996 |
航空和航天.耐高温镍基合金钢NI-P11制带通用头的全铆钉.英制系列 |
(Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series; German version EN 3142:1996) |
| DIN EN 31427-1995 |
银和银珠宝合金的测定.溴化钾容量法 |
(Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide (ISO 11427:1993, includes Corr. 1:1994) (includes EN 31427:1994/AC:1994); German version EN 31427:1994) |
| DIN EN 3145-2003 |
航空航天系列.热轧圆钢棒.标准公差.直径6mm≤D≤250mm.尺寸 |
(Aerospace series - Round bars, hot rolled in steel - Normal tolerances; Diameter 6 mm D 250 mm; Dimensions; German and English version EN 3145:2001) |
| DIN EN 3146-2003 |
航空航天系列.紧公差、直径6mmD250mm的热轧钢制圆形棒材.尺寸 |
(Aerospace series - Round bars, hot rolled, in steel, close tolerances, diameter 6 mmD250 mm - Dimensions; German and English version EN 3146:2001) |
| DIN EN 3149-1996 |
航空和航天.铆接螺母.60度扩径安装孔法兰.结构标准 |
(Aerospace series - Shank nuts - Installation holes, 60 swage, flanges - Design standard; German version EN 3149:1996) |
| DIN EN 315-2000 |
胶合板.尺寸公差 |
(Plywood - Tolerances for dimensions; German version EN 315:2000) |
| DIN EN 3150-1995 |
航空和航天.高温固定镍基合金制带台的圆柱销 |
(Aerospace series - Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718); German version EN 3150:1995) |
| DIN EN 3151-1995 |
航空和航天.高温镍基合金NI-P100HI(因康718)制光滑圆柱销 |
(Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718); German version EN 3151:1995) |
| DIN EN 3152-2005 |
航空航天系列.镀银或未涂覆的耐热钢FE-PA2601 (A286)制MJ螺纹自锁紧螺母.等级:1100 MPa(室温)/425 鳦.技术规范 |
|
| DIN EN 316-1999 |
木纤维板.定义、分类和符号 |
(Wood fibreboards - Definition, classification and symbols; German version EN 316:1999) |
| DIN EN 317-1993 |
木屑板和纤维板.浸水后厚度膨胀的测定 |
(Particleboards and fibreboards; determination of swelling in thickness after immersion in water; German version EN 317:1993) |
| DIN EN 318-2002 |
纤维板.空气相对湿度变化引起的尺寸改变的测定 |
(Wood-based panels - Determination of dimensional changes associated with changes in relative humidity; German version EN 318:2002) |
| DIN EN 319-1993 |
木屑板和纤维板.垂直于板平面抗拉强度的测定 |
(Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board; German version EN 319:1993) |
| DIN EN 3196-1994 |
航空和航天.耐高温钢FE-PA92HT(A286)制镀银自锁六角头螺母.等级:1100MPa(室温)425摄氏度 |
(Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3196:1994) |
| DIN EN 32-1999 |
壁悬式盥洗台.连接尺寸 |
(Wall-hung wash basins - Connecting dimensions; German version EN 32:1998) |
| DIN EN 320-1993 |
纤维板.螺钉拔出阻力的测定 |
(Fibreboards; determination of resistance to axial withdrawal of screws; German version EN 320:1993) |
| DIN EN 3202-1996 |
厨房家具.内装和外放厨柜和工作台的安全技术要求和检验方法. |
(Aerospace series - Holes and traps for T-head bolts - Design standard; German version EN 3202:1995) |
| DIN EN 3207-1998 |
航空和航天.橡胶混合物.交货技术条件 |
(Aerospace series - Rubber compounds - Technical specification; German version EN 3207:1998) |
| DIN EN 321-2002 |
木质人造板.循环试验条件下抗湿性的测定 |
(Wood-based panels - Determination of moisture resistance under cyclic test conditions; German version EN 321:2001) |
| DIN EN 3212-1995 |
航空和航天.涂料.在阻尼氯化纳溶剂中用更换浸渍试验测定耐蚀性 |
(Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution; German version EN 3212:1995) |
| DIN EN 322-1993 |
木质板料.含湿度测定 |
(Wood-based panels; determination of moisture content; German version EN 322:1993) |
| DIN EN 323-1993 |
木质板.粗密度测定 |
(Wood-based panels; determination of density; German version EN 323:1993) |
| DIN EN 3230-2001 |
航空航天系列.钢制、镀镉、标准对边、高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/235℃ |
(Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 鳦; German version EN 3230:2001) |
| DIN EN 3236-1998 |
航空和航天.薄壁,自锁,耐高温,镍基合金NI-P100HT(因康718)制短螺纹接头.镀银内螺纹 |
(Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Silver plated internal thread; German version EN 3236:1998) |
| DIN EN 3237-1998 |
航空和航天.薄壁,自锁,镍基合金NI-P100HT(因康718)制长螺纹接头.镀银内螺纹 |
(Aerospace series - Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100 HT (Inconel 718) - Silver plated internal thread; German version EN 3237:1998) |
| DIN EN 3239-1995 |
航空和航天.镀银螺纹NI-P101HT耐高热镍基合金制自锁十二角螺母.等级:1210MPa(室温下)/730℃ |
(Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/650 C; German version EN 3239:1995) |
| DIN EN 324-1-1993 |
木质板料.板面尺寸测定.第1部分:厚度.宽度和长度测定 |
(Wood-based panels; determination of dimensions of boards; part 1: determination of thickness, width and length; German version EN 324-1:1993) |
| DIN EN 324-2-1993 |
木质板料.板面尺寸测定.垂直度和棱边平直性测定 |
(Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness; German version EN 324-2:1993) |
| DIN EN 3243-2002 |
航空和航天系列.钛合金管连接件8度30分.带动力束封端口的金属圈焊接 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Ferrule welded, with dynamic beam seal end; German version EN 3243:2001) |
| DIN EN 3244-2002 |
航空和航天系列.钛合金管连接件8度30分.双头接头 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, double ended; German version EN 3244:2001) |
| DIN EN 3245-2002 |
航空和航天系列.钛合金管连接件8度30分.异径接头 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, reducer; German version EN 3245:2001) |
| DIN EN 3246-2002 |
航空和航天系列.钛合金管连接件8度30分.闷头接头 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead; German version EN 3246:2001) |
| DIN EN 3247-2002 |
航空和航天系列.钛合金管连接件8度30分.焊接端的闷头接头 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, welded end; German version EN 3247:2001) |
| DIN EN 3248-2003 |
航空航天系列.钛合金管联接器8°30’.带锁紧环的缩径管端头转接器 |
(Aerospace series - Pipe coupling 8°30’in titanium alloy - Adapters, reduced pipe end, with locking ring; German and English version EN 3248:2001) |
| DIN EN 325-1993 |
木质板料.试样尺寸测定 |
(Wood-based panels; determination of dimensions of test pieces; German version EN 325:1993) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com