标准号 |
中文名称 |
英文名称 |
DIN EN 61167/A3-1999 |
金属卤素灯.修正A3 |
(Metal halide lamps; Amendment A3 (IEC 61167:1992/A3:1998); German version EN 61167:1994/A3:1998) |
DIN EN 61168-2000 |
放射治疗模拟器.功能特性 |
(Radiotherapy simulators - Functional performance characteristics (IEC 61168:1993); German version EN 61168:1994) |
DIN EN 61169-1-1-1998 |
射频连接器.第1-1部分:单一多系列双语空白详细规范 |
(Radio-frequency connectors - Part 1-1: Single, multi-series, dual-language blank detail specification (IEC 61169-1-1:1996); German version EN 61169-1-1:1997) |
DIN EN 61169-1-1995 |
高频连接件.第1部分:总规范.一般要求和测量方法 |
(Radio-frequency connectors - Part 1: Generic specification; general requirements and measuring methods (IEC 61169-1:1992); German version EN 61169-1:1994) |
DIN EN 61169-1/A1-1997 |
射频连接器.第1部分:总规范.一般要求和测量方法 |
(Radio-frequency connectors - Part 1: Generic specification; general requirements and measuring methods (IEC 61169-1:1992/A1:1996); German version EN 61169-1:1994/A1:1996) |
DIN EN 61169-1/A2-1998 |
高频连接件.第1部分:总规范.一般要求和测量方法 |
(Radio-frequency connectors - Part 1: Generic specification; general requirements and measuring methods (IEC 61169-1:1992/A2:1997); German version EN 61169-1:1994/A2:1997) |
DIN EN 61169-31-2000 |
射频连接器.第31部分:带螺纹耦合的外导体1,0mm(0,039in)的内径RF共轴连接器.特性阻抗50欧姆(1,0型) |
(Radio-frequency connectors - Part 31: RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling; characteristic impedance 50 ohms (type 1,0) (IEC 61169-31:1999); German version EN 61169-31:1999) |
DIN EN 61169-32-2000 |
射频连接器.第32部分:带螺纹耦合的外导体1,85mm(0,072in)的内径RF共轴连接器.特性阻抗50欧姆(1,85型) |
(Radio-frequency connectors - Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with srew coupling; characteristic impedance 50 ohms (type 1,85) (IEC 61169-32:1999); German version EN 61169-32:1999) |
DIN EN 61169-33-1998 |
射频连接器.第33部分:BMA结构系列的高频插接器用分规范 |
(Radio-frequency connectors - Part 33: Sectional specification for series BMA r.f. connectors (IEC 61169-33:1996); German version EN 61169-33:1997) |
DIN EN 61169-36-1998 |
射频连接器.第36部分:带孔径搭锁连接器的微型连接器的微型化高频同轴插接器用分规范.50欧姆波阻抗(MCX型) |
(Radio-frequency connectors - Part 36: Sectional specification for microminiature r.f. coaxial connectors with snap-on coupling - Characteristic impedance 50 Ohm (type MCX) (IEC 61169-36:1996); German version EN 61169-36:1997) |
DIN EN 61173-1996 |
光电功率发生系统过压保护.导则 |
(Overvoltage protection for photovoltaic (PV) power generating systems - Guide (IEC 61173:1992); German version EN 61173:1994) |
DIN EN 61174-2002 |
航海导航和无线电通信装置与系统 |
(Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results (IEC 61174:2001); German version EN 61174: |
DIN EN 61175-1995 |
信号和连接的术语名称 |
(Designations for signals and connections (IEC 61175:1993); German version EN 61175:1993) |
DIN EN 61176-1995 |
手握式电源电压操作的圆锯性能测量方法 |
(Hand-held electric mains voltage operated circular saws - Methods for measuring the performance (IEC 61176:1993); German version EN 61176:1993) |
DIN EN 61179-1994 |
D2(NTSC,PAL,PAL-M)格式19mm磁带螺旋扫描数字复合盒式录像系统 |
(Helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M) (IEC 61179:1993); German version EN 61179:1993) |
DIN EN 61180-1-1995 |
低压设备的高压试验技术.第1部分:定义,试验和方法要求 |
(High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements (IEC 61180-1:1992); German version EN 61180-1:1994) |
DIN EN 61180-2-1995 |
低压设备的高压试验技术.第2部分:试验设备 |
(High-voltage test techniques for low-voltage equipment - Part 2: Test equipment (IEC 61180-2:1994); German version EN 61180-2:1994) |
DIN EN 61181-1994 |
浸渍绝缘材料.工厂试验用电子设备溶解气体分析的应用 |
(Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:1993); German version EN 61181:1993) |
DIN EN 61183-1994 |
电声学.声级计的无规入射声场及扩散声场的校正 |
(Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters (IEC 61183:1994); German version EN 61183:1994) |
DIN EN 61184-1998 |
卡口灯座 |
(Bayonet lampholders (IEC 61184:1997); German version EN 61184:1997) |
DIN EN 61184-2005 |
卡口灯座 |
|
DIN EN 61184/A1-2001 |
卡口灯座.修改件1 |
(Bayonet lampholders (IEC 61184:1997/A1:2000); Amendment A1; German version EN 61184:1997/A1:2001) |
DIN EN 61185-1998 |
电源设备用的磁氧化铁芯(ETD).尺寸 |
(Magnetic oxide cores (ETD-cores) intended for use in power supply applications - dimensions (IEC 61185:1992 + A1:1995); German version EN 61185:1997) |
DIN EN 61187-1995 |
电气和电子测量仪.随机提供的文件 |
(Electrical and electronic measuring equipment - Documentation (IEC 61187:1993, modified); German version EN 61187:1994) |
DIN EN 61188-1-1-1998 |
印制电路板和印制电路板组件.设计和使用.第1部分:总要求.第1节:电子组件的平整度可见点 |
(Printed boards and printed board assemblies - Design and use - Part 1-1: Generic requirements; flatness considerations for electronic assemblies (IEC 61188-1-1:1997); German version EN 61188-1-1:1997) |
DIN EN 61188-1-2-1999 |
印制电路板和印制电路板组件.设计和使用.第1-2部分:总要求.确定的阻抗 |
(Printed boards and printed board assemblies - Design and use - Part 1-2: Generic requirements; controlled impedance (IEC 61188-1-2:1998); German version EN 61188-1-2:1998) |
DIN EN 61188-5-1-2003 |
印制电路板和印制电路板组件.设计和使用.第5-1部分:焊接(焊接区/接缝)考虑.总要求 |
(Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements (IEC 61188-5-1:2002); German version EN 61188-5-1:2002) |
DIN EN 61188-5-2-2004 |
印制电路板和印制电路板组件.设计和使用.第5-2部分:焊接(焊接区/接缝)条件.分立件 |
|
DIN EN 61188-5-6-2003 |
印制板和印制板组件.设计和使用.第5-6部分:附件的要求.四面带有J形引线的片状载体 |
(Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations; Chip carriers with J-leads on four sides (IEC 61188-5-6:2003); German version EN 61188-5-6:2003) |
DIN EN 61189-1-2002 |
电气材料、印制板和其他互连结构和组装件的试验方法.第1部分:一般试验方法和方法论 |
(Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 1: General test methods and methodology (IEC 61189-1:1997 + A1:2001); German version EN 61189-1:1997 + A1:2001) |
DIN EN 61189-2-2001 |
电气材料、印制电路板和其它互连结构和组件的试验方法.第2部分:互连结构用材料的试验方法 |
(Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures (includes Amendment A1:2000) (IEC 61189-2:1997 + A1:2000); German version EN 611 |
DIN EN 61189-3-2000 |
电气材料、互连结构和组件的试验方法.第3部分:互连结构的试验方法(印制电路板) |
(Test methods for electrical materials, interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) (IEC 61189-3:1997 + A1:1999); German version EN 61189-3:1997 + A1:1999) |
DIN EN 61190-1-1-2003 |
电子组件用连接材料.第1-1部分:电子组件中高质量互连用助焊剂的要求 |
(Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly (IEC 61190-1-1:2002); German version EN 61190-1-1:2002) |
DIN EN 61190-1-2-2003 |
电子组件用连接材料.第1-2部分:电子组件中高质量互连用焊锡的要求 |
(Attachment materials for electronic assembly - Part 1-2: Requirements for solder pastes for high-quality interconnections in electronic assembly (IEC 61190-1-2:2002); German version EN 61190-1-2:2002) |
DIN EN 61190-1-3-2003 |
电子组件用连接材料.第1-3部分:电子焊接用电子级钎焊合金及有焊剂和无焊剂的固体焊料的要求 |
(Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications (IEC 61190-1-3:2002); German version EN 61190-1-3:2002) |
DIN EN 61191-1-1999 |
印刷电路板组件.第1部分:总规范.使用表面安装和相关装配技术的焊接电气和电子组件的要求 |
(Printed board assemblies - Part 1: Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (IEC 61191-1:1998); German version EN 61191-1:1998) |
DIN EN 61191-2-1999 |
印刷电路板组件.第2部分:分规范.表面安装焊接组件的要求 |
(Printed board assemblies - Part 2: Sectional specification: Requirements for surface mount soldered assemblies (IEC 61191-2:1998); German version EN 61191-2:1998) |
DIN EN 61191-3-1999 |
印刷电路板组件.第3部分:分规范.通孔安装焊接组件的要求 |
(Printed board assemblies - Part 3: Sectional specification: Requirements for through-hole mount soldered assemblies (IEC 61191-3:1998); German version EN 61191-3:1998) |
DIN EN 61191-4-1999 |
印刷电路板组件.第4部分:分规范.端点焊接组件的要求 |
(Printed board assemblies - Part 4: Sectional specification: Requirements for terminal soldered assemblies (IEC 61191-4:1998); German version EN 61191-4:1998) |
DIN EN 61192-3-2003 |
钎焊电子组件的工艺要求.第3部分:通孔安装组件 |
(Workmanship requirements for soldered electric assemblies - Part 3: Through-hole mount assemblies (IEC 61192-3:2002); German version EN 61192-3:2003) |
DIN EN 61193-1-2002 |
质量评定体系.第1部分:印制板组件缺陷注册和分析 |
(Quality assessment systems - Part 1: Registration and analysis of defects on printed board assemblies (IEC 61193-1:2001); German version EN 61193-1:2002) |
DIN EN 61194-1996 |
独立式光生伏打系统的特征参数 |
(Characteristic parameters of stand-alone photovoltaic(PV) systems (IEC 61194:1992, modified); German version EN 61194:1995) |
DIN EN 61195-2000 |
双头荧光灯的安全规范 |
(Double-capped fluorescent lamps - Safety specifications (IEC 61195:1999); German version EN 61195:1999) |
DIN EN 61196-2-1995 |
高频电缆规范.第2部分:聚四氟乙烯绝缘的半刚性高频电缆和同轴电缆.分规范 |
(Radio-frequency cables - Specifications - Part 2: Semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation - Sectional specification (IEC 61196-2:1993); German version EN 61196-2:1995) |
DIN EN 61196-2-2004 |
射频电缆.第2部分:聚四氟乙烯绝缘的半刚性射频电缆和同轴电缆分规范 |
|
DIN EN 61196-3-1999 |
高频电缆.第3部分:局域网用同轴电缆的分规范 |
(Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks (IEC 61196-3:1998); German version EN 61196-3:1998) |
DIN EN 61196-3-2-1998 |
高频电缆规范.第3-2部分:平面层布线数字通讯用同轴电缆.第2节:有效半径达到185m,速率在10Mb/s以下的局域网 |
(Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring; detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997); German ve |
DIN EN 61196-3-3-1998 |
高频电缆规范.第3部分:平面层布线数字通讯用同轴电缆.第3节:有效半径达到185m速率在10Mb/s(包括10Mb/s)的局 |
(Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring; Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-3:1997); German v |
DIN EN 61196-4-2004 |
同轴通信电缆.第4部分:辐射电缆的分规范 |
|
DIN EN 61197-1996 |
绝缘油.火焰线性传播.使用玻璃纤维的试验方法 |
(Insulating liquids - Linear flame propagation - Test methods using a glass-fibre tape (IEC 61197:1993); German version EN 61197:1994) |
DIN EN 61198-1995 |
绝缘矿物油.糖醛和有关化合物的测定检验方法 |
(Mineral insulating oils - Methods for the determination of 2-furfurol and related compounds (IEC 61198:1993); German version EN 61198:1994) |
DIN EN 61199-2000 |
单头荧光灯.安全规范 |
(Single-capped fluorescent lamps - Safety specifications (IEC 61199:1999); German version EN 61199:1999) |
DIN EN 612-1996 |
金属薄板制悬吊檐槽和雨水下落管.概念,分类和要求 |
(Eaves gutters and rainwater down-pipes of metal sheet - Definitions, classification and requirements; German version EN 612:1996) |
DIN EN 61202-1-2001 |
纤维光绝缘子.第1部分:一般规范 |
(Fibre optic isolators - Part 1: Generic specification (IEC 61202-1:2000); German version EN 61202-1:2000) |
DIN EN 61203-1995 |
电工用合成有机酯.设备中变压器酯的维护指南 |
(Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment (IEC 61203:1992); German version EN 61203:1994) |
DIN EN 61204-2001 |
直流输出低压供电装置.性能特征 |
(Low-voltage power supply devices, d.c. output - Performance characteristics (IEC 61204:1993, modified + A1:2001); German version EN 61204:1995 + A1:2001) |
DIN EN 61204-3 Berichtigung 1-2004 |
DIN EN 61204-3-2001的技术勘误 |
|
DIN EN 61204-3-2001 |
直流输出低压供电装置.第3部分:电磁兼容性(EMC) |
(Low-voltage power supplies DC output - Part 3: Electromagnetic compatibility (EMC) (IEC 61204-3:2000); German version EN 61204-3:2000) |
DIN EN 61204-6-2001 |
直流输出低压供电装置.第6部分:经过性能评定的低压供电装置的要求 |
(Low-voltage power supplies, DC output - Part 6: Requirements for low-voltage power supplies of assessed performance (IEC 61204-6:2000); German version EN 61204-6:2001) |
DIN EN 61205-1995 |
超声学.牙齿除垢装置.产品性能说明及测试 |
(Ultrasonics - Dental descaler systems - Measurement and declaration of the output characteristics (IEC 61205:1993); German version EN 61205:1994) |
DIN EN 61207-1-1995 |
气体分析器的性能说明.第1部分:概述 |
(Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:1994); German version EN 61207-1:1994) |
DIN EN 61207-2-1995 |
气体分析器的性能说明.第2部分:气体中的氧(利用高温电化检测器) |
(Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) (IEC 61207-2:1994); German version EN 61207-2:1994) |
DIN EN 61207-3 Berichtigung 1-2003 |
DINEN61207-3-2002的勘误 |
(Corrigenda to DIN EN 61207-3:2002-11) |
DIN EN 61207-3-2002 |
气体分析仪.性能说明.第3部分:顺磁氧气分析仪 |
(Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002); German version EN 61207-3:2002) |
DIN EN 61207-6-1995 |
气体分析仪的性能说明.第6部分:光度分析仪 |
(Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994); German version EN 61207-6:1994) |
DIN EN 61209-2000 |
海上导航和无线电通讯设备和系统.集成桥系统(IBS).操作、性能要求、试验方法和要求的试验结果 |
(Maritime navigation and radiocommunication equipment and systems - Integrated Bridge Systems (IBS) - Operational and performance requirements, methods of testing and required test results (IEC 61209:1999); German version EN 61209:1999) |
DIN EN 61210-1995 |
连接装置.铜电导体的扁型速接终端的安全要求 |
(Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements (IEC 61210:1993, modified); German version EN 61210:1995) |
DIN EN 61211-2005 |
标称电压1000V以上的架空线用陶瓷材料或玻璃绝缘子.空气中脉冲击穿试验 |
|
DIN EN 61212-1 Bb.1-1996 |
电工用工业刚性热固树脂层压圆管和棒材.型号比较 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Comparision of types) |
DIN EN 61212-1-1996 |
电工用工业刚性热固树脂层压圆管和棒材.第1部分:一般要求 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements (IEC 61212-1:1995); German version EN 61212-1:1995) |
DIN EN 61212-2-1996 |
电工用工业刚性热固树脂层压圆管和棒材.第2部分:检验方法 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 61212-2:1995); German version EN 61212-2:1996) |
DIN EN 61212-3-1-1996 |
电工用工业刚性热固树脂层压圆管和棒材.第3部分:个别材料的规范.第1节:圆型叠层卷绕管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Round laminated rolled tubes (IEC 61212-3-1:1995); German version EN 61212-3-1:1995) |
DIN EN 61212-3-2-1996 |
电工用工业刚性热固树脂层压圆管和棒材.第3部分:个别材料的规范.第2节:圆型模压管 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Round laminated moulded tubes (IEC 61212-3-2:1995); German version EN 61212-3-2:1995) |
DIN EN 61212-3-3-1996 |
电工用工业刚性热固树脂层压圆管和棒材.第3部分:个别材料的规范.第3节:圆型模压棒 |
(Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 3: Round laminated moulded rods (IEC 61212-3-3:1995); German version EN 61212-3-3:1995) |
DIN EN 61213-1994 |
录像带上模拟声音录制.磁化极性 |
(Analogue audio recording on video tape; polarity of magnetization (IEC 61213:1993); German version EN 61213:1994) |
DIN EN 61215-1996 |
晶体硅地表光伏电池(PV)组件.设计质量和型号认可 |
(Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (IEC 61215:1993); German version EN 61215:1995) |
DIN EN 61217-1998 |
放射治疗设备.坐标系,移动和标度 |
(Radiotherapy equipment - Coordinates, movements and scales (IEC 61217:1996); German version EN 61217:1996) |
DIN EN 61217-2003 |
放射治疗设备.坐标系、移动和标度 |
(Radiotherapy equipment - Coordinates, movements and scales (IEC 61217:1996 + A1:2000); German version EN 61217:1996 + A1:2001) |
DIN EN 61219-1995 |
带电作业.喷枪式短路装置用的接地设备或接地舆短路设备 |
(Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - Lance earthing (IEC 61219:1993); German version EN 61219:1993) |
DIN EN 61221-1996 |
矿物油产品和润滑剂.三芳基-磷酸脂-涡轮机控制液体(类别ISO-L-TCD).要求 |
(Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (categorie ISO-L-TCD) - Specifications (IEC 61221:1993); German version EN 61221:1995) |
DIN EN 61223-2-5-2004 |
医用成像部门的评价及例行试验.第2-5部分:稳定性试验.图像显示装置 |
|
DIN EN 61223-2-6-1997 |
医疗X光放射科的评定和定期检验.第2-6部分:稳定性检验.计算机断层摄影用X光设备 |
(Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests; X-ray equipment for computed tomography (IEC 61223-2-6:1994); German version EN 61223-2-6:1994) |
DIN EN 61223-3-1-2001 |
医院成像科中的评定和常规试验.第3-1部分::验收试验.辐射照相和辐射显微照相系统用X射线设备的成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests; Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999); German version EN 61223-3-1:1999) |
DIN EN 61223-3-2-2001 |
医疗X光放射科的评定和定期检验.第3-2部分:验收试验.乳腺X-射线设备成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests; Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:1996); German version EN 61223-3-2:1996) |
DIN EN 61223-3-3-2000 |
医院成像科中的评定和常规试验.第3-3部分:验收试验.数字减法血管造影术(DSA)用X线透视设备的成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests; Imaging performance of X-ray equipment for digital subtraction angiography (IEC 61223-3-3:1996); German version EN 61223-3-3:1996) |
DIN EN 61223-3-4-2001 |
医疗成像科中的评定和常规试验.第3-4部分:验收试验.牙科X射线设备的成像性能 |
(Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests; Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000); German version EN 61223-3-4:2000) |
DIN EN 61228-1995 |
太阳浴用的紫外线灯紫外线辐射量的规定和测量方法 |
(Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning (IEC 61228:1993); German version EN 61228:1994) |
DIN EN 61228/A1-1997 |
太阳浴用的紫外线灯紫外线辐射量的规定和测量方法.补充件1 |
(Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning (IEC 61228:1993/A1:1996); German version EN 61228:1994/A1:1996) |
DIN EN 61229-1997 |
交流设备带电作业用刚性保护罩 |
(Rigid protective covers for live working on a.c. installations (IEC 61229:1993, modified); German version EN 61229:1995) |
DIN EN 61229/A1-1999 |
交流设备带电作业用刚性保护罩.修正A1 |
(Rigid protective covers for live working on a.c. installations; Amendment A1 (IEC 61229:1993/A1:1998); German version EN 61229:1995/A1:1998) |
DIN EN 61229/A2-2003 |
交流设备上带电作业用刚性保护罩.修改件A2 |
(Rigid protective covers for live working on a.c. installations (IEC 61229:1993/A2:2002); Amendment A2; German version EN 61229:1995/A2:2002) |
DIN EN 61230-1996 |
带电作业.便携式接地电路或接地短路电路设备 |
(Live working - Portable equipment for earthing or earthing and short-circuiting (IEC 61230:1993, modified); German version EN 61230:1995) |
DIN EN 61232-2001 |
电气设备用包铝钢丝 |
(Aluminium-clad steel wires for electrical purposes (IEC 61232:1993, modified); German version EN 61232:1995 + A11:2000) |
DIN EN 61234-1-1994 |
电绝缘材料水解稳定性的试验方法.第1部分:塑料薄膜 |
(Method of test for the hydrolytic stability of electrical insulating materials - Part 1: Plastic films (IEC 61234-1:1994); German version EN 61234-1:1994) |
DIN EN 61234-2-1998 |
电绝缘材料.水解稳定性的试验方法.第2部分:模制热固材料 |
(Electrical insulating materials - Method of test for the hydrolytic stability - Part 2: Moulded thermosets (IEC 61234-1:1997); German version EN 61234-2:1998) |
DIN EN 61235-1997 |
带电作业.电工用绝缘空心管 |
(Live working - Insulating hollow tubes for electrical purposes (IEC 61235:1993, modified); German version EN 61235:1995) |
DIN EN 61236-1996 |
带电作业用滑动座架,电杆夹及附件 |
(Saddles, pole clamps (stick clamps) and accessories for live working (IEC 61236:1993, modified); German version EN 61236:1995) |
DIN EN 61237-1-1995 |
广播磁带录像机.测量方法.第1部分:技术要求 |
(Broadcast video tape recorders - Methods of measurement - Part 1: Mechanical measurements (IEC 61237-1:1994); German version EN 61237-1:1994) |
DIN EN 61237-2-1996 |
广播磁带录像机测量方法.第2部分:模拟合成录像信号的电气测量 |
(Methods of measurement for broadcast video tape recorders - Part 2: Electrical measurements of analogue composite video signals (IEC 61237-2:1995); German version EN 61237-2:1995) |
DIN EN 61237-3-1995 |
广播磁带录像机测量方法.第3部分:模拟视频信号的电气测量 |
(Methods of measurement for broadcast video tape recorders - Part 3: Electrical measurements for analogue component video signals (IEC 61237-3:1995); German version EN 61237-3:1995) |
DIN EN 61237-4-1998 |
广播用磁带录像机.测量方法.第4部分:模拟音频信号的功率特性的测量 |
(Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements (IEC 61237-4:1997); German version EN 61237-4:1997) |
DIN EN 61238-1-2004 |
额定电压36kV(Um=42kV)及以下的电力电缆用压接和机械连接器.第1部分:试验方法和要求 |
|
DIN EN 61240-1997 |
压电装置.频率控制和选择用表面安装装置框图制备.总则 |
(Piezoelectric devices - Preparation of outline drawings of surface mounted devices (SMD) for frequency control and selection; General rules (IEC 61240:1994); German version EN 61240:1997) |
DIN EN 61241-1-2005 |
有可燃性粉尘场合用电气设备.第1部分:外壳防护tD型 |
|
DIN EN 61241-14-2005 |
有可燃性粉尘场合用电气设备.第14部分:选择和安装 |
|
DIN EN 61241-18-2005 |
有可燃性粉尘场合用电气设备.第18部分:封装mD型防护设备 |
|
DIN EN 61241-18-2005 |
有可燃性粉尘场合用电气设备.第18部分:封装mD型防护设备 |
|
DIN EN 61241-2-2-1996 |
用于易燃粉尘的电气设备.第2部分:检验方法.第1节:粉尘倾倒的电阻测定法 |
(Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers (IEC 61241-2-2:1993 + Corrigendum 1994); German version EN 61241-2-2:1995) |
DIN EN 61242-1997 |
电气安装材料.家用和类似用途的电缆盘 |
(Electrical accessories - Cable reels for household and similar purposes (IEC 61242:1995, modified); German version EN 61242:1997) |
DIN EN 61242-2004 |
电气附件.家用和类似用途卷线盘 |
|
DIN EN 61243-1 Berichtigung 1-2001 |
DINEN61243-1-1998的技术勘误 |
(Corrigendum to DIN EN 61243-1 (VDE 0682 Teil 411):1998-05) |
DIN EN 61243-1-1998 |
带电作业.电压检测器.第1部分:1kV以上交流电压用容电器类型 |
(Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. (IEC 61243-1:1993 + A1:1997); German version EN 61243-1:1997 + A1:1997) |
DIN EN 61243-2-2001 |
带电作业.电压探测器.第2部分:1kV-36kV交流电压用电阻类型 |
(Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. (includes Amendment A1:2000) (IEC 61243-2:1995 + A1:1999 + Corrigendum 2000); German version EN 61243-2:1997 + A1:2000) |
DIN EN 61243-2/A2-2003 |
带电作业.电压检测器.第2部分:1kV-36kV交流电压用电阻类型.修改件A2 |
(Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. (IEC 61243-2:1995/A2:2002); Amendment A2; German version EN 61243-2:1997/A2:2002) |
DIN EN 61243-3-1999 |
带电作业.电压检测器.第3部分:低压网用两极电压检测器 |
(Live working - Voltage detectors - Part 3: Two-pole low voltage type (IEC 61243-3:1998); German version EN 61243-3:1998) |
DIN EN 61243-5-2002 |
带电作业.电压检测器.第5部分:电压检测器(VDS) |
(Live working - Voltage detectors - Part 5: Voltage detective systems (VDS) (IEC 61243-5:1997, modified); German version EN 61243-5:2001) |
DIN EN 61247-1997 |
磁氧物和相伴部件制的PM芯.尺寸 |
(PM-cores made of magnetic oxides and associated parts - Dimensions (IEC 61247:1995); German version EN 61247:1997) |
DIN EN 61248-1-1998 |
电子和电信设备用变压器和电感器.第1部份:总规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification (IEC 61248-1:1996); German version EN 61248-1:1997) |
DIN EN 61248-2-1998 |
电子和电信设备用变压器和电感器.第2部份:有合格认证的信号变压器用分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure (IEC 61248-2:1996); German version EN 61248-2:1997) |
DIN EN 61248-3-1998 |
电子和电信设备用变压器和电感器.第3部份:有合格认证的电力变压器用分规范 |
(Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure (IEC 61248-3:1996); German version EN 61248-3:1997) |