标准号 |
中文名称 |
英文名称 |
DIN V 18998-2002 |
根据DINEN934系列评定混凝土外加剂腐蚀性 |
(Assessment corrosion behaviour of admixtures according the series DIN EN 934) |
DIN V 18998/A1-2003 |
根据DINEN934系列评定混凝土外加剂腐蚀性.修改件A1 |
(Assessment corrosion behaviour of admixtures the series DIN EN 934; Amendment A1) |
DIN V 19222-2001 |
控制技术.术语 |
(Control technology - Terminology) |
DIN V 19224-2000 |
加工制造工业的电气仪表和控制系统投产期间的重大事件与活动 |
(Milestones and activities during commissioning of elektrical instrumentation and control systems in the process industry (Text English)) |
DIN V 19233-1998 |
控制技术.过程自动化.带过程计算机系统的自动化,定义 |
(Control technology - Process automation - Automation with process computer systems, definitions) |
DIN V 19247-1-2003 |
控制技术.工艺处理中氧气添加装置.第1部分:测量仪表.一般要求和检验 |
(Control technology - Devices for oxygen service in the process-technique - Part 1: Instrumentation; General requirements and testings) |
DIN V 19247-2-2003 |
控制技术.工艺处理中氧气添加装置.第2部分:测量仪器和传感器.一般要求和检验 |
(Control technology - Devices for oxygen service in the process-technique - Part 2: Measuring instruments and transmitters; General requirements and testings) |
DIN V 19248-1999 |
确保部件压力安全的强度过程测量与控制仪器试验 |
(Control technology - Testing for process measurement and control equipment on strength to ensure pressure safety of parts) |
DIN V 19249-2003 |
控制技术.非电气驱动装置、仪器和设备以及电气驱动仪器的非电器零件的安全性.一般要求 |
(Control technology - Safety for non-electrically operated devices, equipment and systems, as well as non-electrically operated parts of electrical devices - General requirements) |
DIN V 19250-1994 |
控制技术.MSR保护装置的基本安全观测 |
(Control technology; fundamental safety aspects to be considered for measurement and control equipment) |
DIN V 19251-1995 |
控制技术.MSR保护装置.保险功能的要求和措施 |
(Process control technology - MC protection equipment - Requirements and measures for safeguarded function) |
DIN V 19256-1997 |
控制技术.工厂用工艺控制技术设备.设计,安装及运行的指南 |
(Control technology - Equipment of process control technology (PCT) for industrial plants - Guidance for planning, installation and operation) |
DIN V 19259-1996 |
设备文献.工艺测量技术上带模拟或数字输出的测量装置用带分级图的数据类型 |
(Documentation of devices - Data types with classification scheme for measuring equipment with analog or digital output for industrial process measurement) |
DIN V 19259-2-1999 |
设备文献.调节阀用带分类示意图的数据类型 |
(Documentation of devices - Standard data element types with associated classification for valves) |
DIN V 19517-2002 |
排水管和污水管防喷射性测定的试验方法 |
(Test methods for determination of the jetting resistance of drain and sewer pipes) |
DIN V 19569-9-2001 |
废水处理工厂.结构和技术设备设计原则.第9部分:污泥的机械排放 |
(Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 9: Mechanical drainage of sewage sludge) |
DIN V 19575-1995 |
乳化液分离设备.检验 |
(Emulsion splitting plants - Testing) |
DIN V 19580-2003 |
车辆和人行区的排水通道.抗风化、单位面积的质量和第三方控制 |
(Drainage channels for vehicular and pedestrian areas - Weathering resistance, mass per unit area and third party control) |
DIN V 19688-2001 |
土壤质量.预先压实的土壤密实性测定 |
(Soil quality - Determination of compactibility of soils from the preconsolidation stress) |
DIN V 19735-1999 |
土质.盐水中从硝酸铵可萃取物或提取物中析出的素浓度 |
(Soil quality - Derivation of element concentrations in soil water from ammoniumnitrate extractable contents or eluate contents) |
DIN V 19736-1998 |
土壤质量.地下水中有机物浓度推算 |
(Soil quality - Derivation of concentrations of organic pollutants in soil water) |
DIN V 1999-7-1996 |
轻液体分离装置.第7部分:无害分离清洗剂.要求.检验 |
(Installations for separation of light liquids - Part 7: Proseparate cleansing agents; requirements, testing) |
DIN V 20000-1-2004 |
结构物中建筑产品的应用.第1部分:木基板材 |
(Application of construction products in structures - Part 1: Wood based panels) |
DIN V 20000-1-2004 |
结构物中建筑产品的应用.第1部分:木基板材 |
|
DIN V 20000-1-2004 |
结构物中建筑产品的应用.第1部分:木基板材 |
|
DIN V 20000-1-2005 |
结构物中建筑产品的应用.第1部分:木基板材 |
|
DIN V 20000-100-2002 |
建设中建筑物产品应用.第100部分:遵照DINEN934-2:2002-02的水泥含混物 |
(Application of building products in structures - Part 100: Concrete admixtures according DIN EN 934-2:2002-02) |
DIN V 20000-101-2002 |
建设中建筑物产品应用.第101部分:遵照DINEN934-2:2002-02的预应力泥浆用含混剂 |
(Application of building products in structures - Part 101: Admixtures for grout for prestressing tendons according to DIN EN 934-4:2002-02) |
DIN V 20000-102-2004 |
施工作业中建筑产品的使用.第102部分:符合DIN EN 13383-1-2002的集料 |
|
DIN V 20000-103-2004 |
施工作业中建筑产品的使用.第103部分:符合DIN EN 12620-2003的集料 |
|
DIN V 20000-104-2004 |
施工作业中建筑产品的使用.第104部分:符合DIN EN 13055-1:2002-08的轻质集料 |
|
DIN V 20000-105-2004 |
建筑工程中建筑产品的使用.第105部分:依据DIN EN 13450-2003的集料 |
|
DIN V 20000-401-2005 |
结构物中建筑产品的应用.第401部分:符合DIN EN 771-1-2005的粘土砌块的应用规则 |
|
DIN V 20000-402-2005 |
结构物中建筑产品的应用.第402部分:符合DIN EN 771-2-2005的硅酸钙砌块的应用规则 |
|
DIN V 20000-403-2005 |
结构物中建筑产品的应用.第403部分:符合DIN EN 771-3-2005的集料混凝土砌块的应用规则 |
|
DIN V 20000-404-2005 |
结构物中建筑产品的应用.第404部分:符合DIN EN 771-4-2005的高压蒸养加气混凝土砌块的应用规则 |
|
DIN V 20000-412-2004 |
结构中建筑产品的应用.第412部分:符合DIN EN 998-2-2003的圬工灰浆的应用规则 |
|
DIN V 2307-2003 |
与EN1792相关的焊接用术语和定义 |
(Terms and definitions for welding purposes in relation with EN 1792; Trilingual version CR 14599:2002) |
DIN V 2308-2004 |
焊接.工作位置.现行国际、欧洲和美国的标识比较 |
|
DIN V 24194-2-1985 |
通风设备管道部件.密封性.风道系统密封等级 |
(Ducting for ventilation equipment; air leckage classification of sheet metal ducting systems) |
DIN V 27001-2001 |
RFID系统.消费品经济的要求.RF日识别器 |
() |
DIN V 30745-2003 |
用转发器技术进行废弃物容器的无线电射频识别 |
(Radio-frequency identification of waste containers by transponder technology; text German and English) |
DIN V 30995-1999 |
不包括硬金属的烧结金属材料.金相制备和检验 |
(Sintered metal materials, excluding hardmetals - Metallographic preparation and examination (ISO/TR 14321:1997)) |
DIN V 32528-1999 |
高效陶瓷.气体焊接设备.火焰加热和相关工艺用工业手动和机动氧燃气喷嘴 |
(Gas welding equipment - Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes (CR 13259:1998)) |
DIN V 32538-2000 |
焊接.EN729的金属材料熔焊质量要求的实施 |
(Welding - Implementation of EN 729 on quality requirements for fusion welding of metallic materials (CR 13576:1999)) |
DIN V 32540-1997 |
激光束磨蚀.用激光束进行的热磨蚀.定义,参数,实施 |
(Laser beam removing - Thermal removing with laser beam - Definitions, influence factors, procedure) |
DIN V 3260-10-1999 |
封闭管道中水流量的测量.饮用冷水测量计.第10部分:规范 |
(Measurement of water flow in closed conduits - Meters for cold potable water - Part 10: Specifications (ISO 4064-1:1993)) |
DIN V 32879-1-1995 |
按渡越时间法光电子学测距.第1部分:不相参性渡越时间法 |
(Optoelectronic measurement of distance using time-of-flight principle - Part 1: Incoherent time-of-flight principle) |
DIN V 32938-1998 |
用表面光度光学显微法检验表面形状.概念和测量方法 |
(Surface profiling by means of optical microscopic methods - Concepts and measurement procedures) |
DIN V 32950-1997 |
几何产品规范.总体规划 |
(Geometrical product specification (GPS) - Masterplan (ISO/TR 14638:1995)) |
DIN V 33901-2001 |
信息和文献.文档和图书馆资料的文件存储要求 |
(Information and documentation - Document storage requirements for archive and library materials) |
DIN V 38402-17-1988 |
德国对水.废水和淤泥的统一检验法.一般说明(A组).液体物态中潮湿沉淀物取样(A17) |
(German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of wet precipitation in liquid state (A 17)) |
DIN V 38407-11-1995 |
德国对水、废水和淤泥的标准检验法.可共同测定物质(F组).第11部分:用自动多次开发技术测定选出的有机植物处 |
(German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 11: Determination of selected organic plant protecting agents by Automated Multiple Development (AMD)-technique (F 11)) |
DIN V 38408-24-1987 |
德国对水、废水和淤泥的统一检验法.气体含量(G组).自发性氧耗测定 |
(German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of the spontaneous oxygen depletion (G 24)) |
DIN V 38411-10-2001 |
德国对水、废水和淤泥的标准检验法.微生物法(K组)法.第10部分:体外丙氨酸氨基肽酶的测定 |
(German standard methods for the examination of water, waste water and sludge - Microbiological methods (group K) - Part 10: Determination of the in vivo alanine aminopeptidases activities (K 10)) |
DIN V 4000-100-1994 |
事物特性表.特性数据的数据技术说明 |
(Tabular layouts of article characteristics description of data for characteristics) |
DIN V 4000-101-1994 |
事物特性表.特性数据的数据技术说明.几何数据处理规则 |
(Tabular layouts of article characteristics description of data for characteristics; rules for processing of geometric data) |
DIN V 4000-104-1997 |
事物特性表.第104部分:明确的几何学解释用特性数据的数据技术说明 |
(Tabular layouts of article characteristics - Part 104: Technical description of characteristics data for explicit geometrical representation) |
DIN V 4000-121-1998 |
夹紧紧固件或扩张紧固件用事物特性表.第121部分:平面紧固件 |
(Tabular layout of article characteristics for clamping or spreading clips - Part 121: Surface clamps) |
DIN V 4000-122-1998 |
夹紧紧固件或扩张紧固件用事物特性表.第122部分:线路紧固件 |
(Tabular layout of article characteristics for clamping or spreading clips - Part 122: Clamps) |
DIN V 4000-123-1998 |
夹紧紧固件或扩张紧固件用事物特性表.第123部分:端面紧固件 |
(Tabular layout of article characteristics for clamping or spreading clips - Part 123: Profiled clamps) |
DIN V 4000-124-1998 |
夹紧紧固件或扩张紧固件用事物特性表.第124部分:锁紧紧固件 |
(Tabular layout of article characteristics for clamping or spreading clips - Part 124: Fastening elements) |
DIN V 4000-71-1992 |
传感器事物特性表 |
(Tabular layouts of article characteristics for sensors) |
DIN V 4000-79-1993 |
图形符号的特性表 |
(Tabular layouts of article characteristics for graphical symbols) |
DIN V 4001-11 Bb.1-1992 |
计算机辅助设计标准件文件.几何和特性说明.带柄的六角螺丝 |
(CAD standard parts library; specification of geometrie and parameters; hexagon head bolts) |
DIN V 4001-11-1992 |
计算机辅助设计标准件文件.几何和特性说明.用工具外驱动的平面顶部螺丝 |
(CAD standard parts library; specification of geometrie and parameters; head screws, with plain sitting surface, with drive external by tool) |
DIN V 4001-12-1988 |
计算机辅助设计标准件文件.几何和特性说明.沉头螺钉 |
(CAD standard parts file; specification of geometry and parameters; countersunk head screws) |
DIN V 4001-1401-1988 |
计算机辅助设计标准件文件.几何和特性说明.螺栓连接和插接连接用线鼻子 |
(CAD standard parts file; specification of geometry and parameters; cable sockets for screw and snap connection) |
DIN V 4001-15-1988 |
计算机辅助设计标准件文件.几何和特性说明.平面平行和球状垫片及环 |
(CAD standard parts file; specification of geometry and parameters; plane parallel and crowned washers and rings) |
DIN V 4001-16-1987 |
计算机标准件文件.几何和特性说明.全铆钉和空心铆钉 |
(CAD standard parts file; specification of geometry and parameters; full and tubular rivets) |
DIN V 4001-1601-1990 |
计算机辅助设计标准件文件.几何和特性说明.带螺纹的钢制管件 |
(CAD standard parts file; specifications of geometry and parameters; threaded steel pipe fittings) |
DIN V 4001-1608-1990 |
计算机辅助设计标准件文件.几何和特性说明.带螺纹钢制管件 |
(CAD standard parts file; specifications of geometry and parameters; threaded steel pipe fittings) |
DIN V 4001-1611-1990 |
计算机辅助设计标准件文件.几何和特性说明.带螺纹的钢制管件.弯头 |
(CAD standard parts file; specifications of geometry and parameters; threaded steel pipe fittings; bends) |
DIN V 4001-17-1988 |
计算机辅助设计标准件文件.几何和特性说明.配合铆钉和盲铆钉 |
(CAD standard parts file; specification of geometry and parameters; tolerance- and blind rivets) |
DIN V 4001-2-1988 |
计算机辅助设计标准件文件.几何和特性说明.A级几何组件 |
(CAD standard parts file; specification of geometry and parameters; elements of geometry class A) |
DIN V 4001-2/A1-1989 |
计算机辅助设计标准件文件.几何和特性说明.A级几何组件.修订1 |
(CAD standard parts file; specification of geometry and parameters; elements of geometry class A; amendment 1) |
DIN V 4001-2/A2-1990 |
计算机辅助设计标准件文件.几何和特性说明.A级几何结构组件 |
(CAD standard parts file; specifications of geometry and parameters; elements of geometry class A; amendment 2) |
DIN V 4001-201-1990 |
计算机辅助设计标准件文件.几何和特性说明.用工具内驱动平面顶部螺丝 |
(CAD standard parts file; specifications of geometry and parameters; head screws, with plain sitting surface, with drive internal by tool) |
DIN V 4001-202-1989 |
计算机辅助设计标准件文件.几何和特性说明.用工具外驱动的平头配合螺栓 |
(CAD standard parts file; specifications of geometry and parameters; bolts with head, close tolerance, with plain sitting surface, with drive external by tool) |
DIN V 4001-204-1990 |
计算机辅助设计标准件文件.几何和特性说明.用工具内驱动平面顶部配合螺丝 |
(CAD standard parts file; specifications of geometry and parameters; bolts with head, close tolerance, with plain sitting surface, with drive internal by tool) |
DIN V 4001-206-1991 |
计算机辅助设计标准件文件.几何和特性说明.用特殊工具驱动的松动螺母 |
(CAD standard parts file; specification of geometry and parameters; nuts, separate, drive with special-tool) |
DIN V 4001-207-1991 |
计算机辅助设计标准件文件.几何和特性说明.螺杆.螺销和杆式螺丝 |
(CAD standard parts file; specification of geometry and parameters; threaded pins, set screws and headless screws) |
DIN V 4001-27-1988 |
计算机标准件文件.几何和特性说明.带和不带棱角的结构素,沉降和穿孔 |
(CAD standard parts file; specifications for geometry and parameters; counterbores and clearanceholes with and without chamfer) |
DIN V 4001-29-1989 |
计算机辅助设计标准件文件.几何和特性说明.工具驱动的松紧螺母 |
(CAD standard parts file; specifications of geometry and parameters; nuts, separate, with drive by tool) |
DIN V 4001-302 Bb.1-1993 |
CAD标准文件.几何和特性的设计值.齿形垫圈弹簧垫圈和锥形弹簧垫圈 |
(CAD standard parts library; specifications of geometry and parameters; toothed-, wave spring- and conical spring washers) |
DIN V 4001-302-1993 |
CAD标准件文件.几何尺寸和特性数据.带齿的波汶状的和弹性垫圈 |
(CAD standard parts file; specifications of geometry and parameters; toothed-, wave spring- and conical spring washers) |
DIN V 4001-304-1992 |
CAD标准件数据.几何尺寸和标记.楔型垫片 |
(CAD standard parts file; specifications of geometry and parameters; wedgeshaped washers) |
DIN V 4001-306-1992 |
CAD标准件数据.几何尺寸和标记规范.圆截面安全环 |
(CAD standard parts library; specifications of geometry and parameters; retaining rings with round cross-section) |
DIN V 4001-40-1989 |
计算机辅助设计标准件文件.几何和特性说明.结构素.中心孔 |
(CAD standard part file; specifications of geometry and parameters; formelements, center holes) |
DIN V 4001-409-1990 |
计算机辅助设计标准件文件.几何和特性说明.半成品.Z断面 |
(CAD standard parts file; specification of geometry and parameters; semi-manufactured product, zeds-section) |
DIN V 4001-901-1988 |
计算机辅助设计标准件文件.几何和特性说明.带台阶的螺栓 |
(CAD standard parts file; specification of geometry and parameters; bolts and pins with shoulders) |
DIN V 4001-902-1988 |
计算机辅助设计标准文件.几何和特性说明.螺栓和带头的销钉 |
(CAD standard parts file; specification of geometry and parameters; bolts and pins with head) |
DIN V 4001-903-1990 |
计算机辅助设计标准件文件.几何和特性说明.无头螺栓和销钉 |
(CAD standard parts file; specifications of geometry and parameters; bolts and pins without head) |
DIN V 4002-2-2003 |
产品数据交换用物品特性和参考分级结构.第2部分:术语和定义 |
(Article characteristics and reference hierarchy for the change of product datas - Part 2: Terms and definitions) |
DIN V 4002-3-2002 |
产品数据交换特性和参考分级结构.第3部分:特性的分类结构和信息技术定义 |
(Properties and reference hierarchy for product data exchange - Part 3: Textural and information technological definition of the property attributes) |
DIN V 4002-4-2003 |
产品数据交换物品特性和参考分级结构.第4部分:特性、物体和等级制定的术语规则 |
(Article characteristics and reference hierarchy for the exchange of product datas - Part 4: Terminological rules for the development of characteristics, objects and classes) |
DIN V 4002-5-2002 |
产品数据交换特性和参考分级结构.第5部分:量示特性单位 |
(Properties and reference hierarchy for product data exchange - Part 5: Units for quantitative properties) |
DIN V 4002-6-2003 |
产品数据交换用物品特性和参考分级结构.第6部分:物体等级结构的内容方面和信息-技术定义 |
(Characteristics and reference hierarchy to product data exchange - Part 6: Contentwise and information-technical definition of the structure of object classes) |
DIN V 40046-36-1987 |
电工.基本环境检验法.Kx检验:电接触和连接用二氧化硫SO2 |
(Electrical engineering; basic environmental testing procedures; test Kx: sulphur dioxide SO for electrical contacts and connections) |
DIN V 40046-37-1987 |
电工.基本环境检验法.Ky检验:电接触和连接用氢亚硫酸盐(硫化氢)H2S |
(Electrical engineering; basic environmental testing procedures; test Ky: hydrogen sulphide HS for electrical contacts and connections) |
DIN V 40102-1-2000 |
医用图形符号.第1部分:技术设备 |
(Graphical symbols for use on medical - Part 1: Technical equipment) |
DIN V 40102-2-2000 |
家用电气器具的图形符号 |
(Graphical symbols for use on household appliances) |
DIN V 40102-3-1998 |
电器技术专业图标.通信 |
(Graphical symbols for use on communication equipment) |
DIN V 4017-100 Bb.1-1996 |
地基.平面地基的抗基础裂陷的计算.第100部分:按照带部件安全系数的方案计算.计算实例 |
(Soil - Calculation of design bearing capacity of soil beneath shallow foundations - Part 100: Analysis in accordance with the partial safety factor concept - Calculation examples) |
DIN V 4017-100-1996 |
地基.平面地基的抗基础裂陷的计算.第100部分:按照带部件安全系数的方案计算. |
(Soil - Calculation of design bearing capacity of soil beneath shallow foundations - Part 100: Analysis in accordance with the partial safety factor concept) |
DIN V 4019-100-1996 |
地基.沉陷计算.第100部分:按照带部件安全系数的方案计算. |
(Soil - Analysis of settlement - Part 100: Analysis in accordance with partial safety factor concept) |
DIN V 4032-10-1991 |
混凝土管和管件.符合TGL26721/01.03.04的混凝土管制造和使用的过度条件 |
(Concrete pipes and fittings; transfer conditions for production and installation of concrete pipes referring to TGL 26721/01, 03 and 04) |
DIN V 4034-1-2003 |
排水用未加筋的、钢纤维和加筋的预制混凝土人孔.1型和2型.要求、试验方法和合格评定 |
Prefabricated concrete manholes, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Part 1: Requirements, test methods and evaluation of conformity |
DIN V 4034-1-2004 |
排水和污水用未加筋的、钢纤维和加筋的预制混凝土人孔.1型和2型.第1部分:要求、试验方法和合格评定 |
|
DIN V 40719-1000-1993 |
电路图,用计算机辅助设计的电路图绘制的规范 |
Diagrams, charts, tables; rules for the computer-aided design of electrotechnical circuit diagrams |
DIN V 4084-100 Bb.1-1997 |
地基.坡面断口和路基断口的计算.第100部分:按照带部件安全系数的方案计算.计算实例 |
Soil - Calculation of slope and embankment failure and overall stability of retaining structures - Part 100: Analysis in accordance with the partial safety factor concept, calculation examples |
DIN V 4084-100-1996 |
地基.坡面断口和路基断口的计算.第100部分:按照带部件安全系数的方案计算 |
Soil - Calculation of slope and embankment failure and overall stability of retaining structures - Part 100: Analysis in accordance with the partial safety factor concept |
DIN V 4085-100 Bb.1-1997 |
建筑地基.地压计算.第100部分:根据带有部分安全系数的方案计算.计算实例 |
Soil - Calculation of earth pressure - Part 100: Analysis in accordance with the partial safety factor concept; calculation examples |
DIN V 4085-100-1996 |
地基.地压计算.第100部分:按照带部件安全系数的方案计算 |
(Soil - Calculation of earth-pressure - Part 100: Analysis in accordance with the partial safety factor concept) |
DIN V 4108-10 Berichtigung 1-2004 |
对DIN V 4108-10-2004的勘误 |
|
DIN V 4108-10-2002 |
建筑物中隔热和节能.热绝缘材料的应用要求.第10部分:工厂制产品 |
(Thermal insulation and energy economy in buildings - Application-related requirements for thermal materials - Part 10: Factory made products) |
DIN V 4108-10-2004 |
建筑物中隔热和节能.热绝缘材料的应用要求.第10部分:工厂制产品 |
|
DIN V 4108-4-2002 |
建筑物中隔热和节能.第4部分:温湿性设计值 |
(Thermal insulation and energy economy in buildings - Part 4: Hygrothermal design values) |
DIN V 4108-4-2004 |
建筑物中隔热和节能.第4部分:温湿设计值 |
|
DIN V 4108-6 Berichtigung 1-2004 |
DIN V 4108-6-2003的勘误 |
|