标准号 |
中文名称 |
英文名称 |
DIN 32727-1981 |
热交换器的流动量安全装置.安全技术要求和检验 |
(Flow switches for heat transfer installations; safety requirements and test) |
DIN 32728-1981 |
装料控制器.装有有机液体的热交换器用液位控制器.安全技术要求和检验 |
(Filling controls; low fluid cut off (control) for heat transfer installations with organic fluids; safety requirements and test) |
DIN 32730-1993 |
取暖装置中水和蒸气用具有安全功能的调节阀.安全技术要求和检验 |
(Valves with a safety function for water and steam in heating systems; safety requirements and testing) |
DIN 32732-1989 |
机械操作的燃烧空气的瓣阀.安全技术要求.检验和作标记 |
(Mechanically actuated combustion air flaps; safety requirements, testing and marking) |
DIN 32736 Bb.1-2000 |
建筑物管理.服务的定义和范围.服务的比较 |
(Building Management - Definitions and scope of services - Comparison of services) |
DIN 32736-2000 |
建筑物管理.服务的定义和范围 |
(Building Management - Definitions and scope of services) |
DIN 32742-1-1995 |
办公技术和数据技术.传真机.概念及分类 |
(Office machines - Facsimile equipment - Part 1: Concepts and classification) |
DIN 32742-2-1995 |
办公室和数据技术.传真复印机.第2部分:基本要求 |
(Office machines - Facsimile equipment - Part 2: Basic requirements) |
DIN 32742-3-1995 |
办公室和数据技术.传真复印机.第3部分:简要说明 |
(Office machines - Facsimile communication equipment - Part 3: Minimum information to be specified) |
DIN 32742-5-1992 |
办公技术和数据技术.传真复印机.对传真样件的最低要求 |
(Office machines; facsimile equipment; minimum requirements for documents to be transmitted) |
DIN 32742-6-1994 |
办公技术和数据技术.传真机.对传真接收机的最低要求 |
(Office machines; facsimile equipment; minimum requirements for received copies) |
DIN 32742-7-1999 |
办公技术和数据技术.传真复印机.第7部分:传真复印机类型.结构和应用 |
(Office machines facsimile equipment - Part 7: Realisation and application) |
DIN 32742-8-2001 |
信息技术.办公室设备.传真设备.第8部分:传真信息信号规则 |
(Information technology - Office equipment; Facsimile equipment - Part 8: Rules for facsimile information signals) |
DIN 32744-1-2001 |
办公机器;储蓄存折上的磁条;第1部分:机械性能和电磁性能 |
(Office machines - Magnetic stripes on saving books - Part 1: Mechanical and electromagnetic properties) |
DIN 32744-2-1983 |
办公技术和数据技术;储蓄存折上的磁条;位置与记录 |
(Office machines; magnetic stripes on saving books; position and recording) |
DIN 32745-1985 |
办公技术和数据技术.拆信机.最低数据 |
Office machines; letter opening machines; minimum information to be specified |
DIN 32747-1-1994 |
邮政和数据加工文件的连续处理系统.文献.装信机.第1部分:概念和分类 |
(Systems of continued processing of mail and data processing documents - Inserting machines - Part 1: Terms and classification) |
DIN 32747-2-1994 |
邮政和数据加工文件连续处理系统.文献.装信机.第2部分:最简说明 |
(Systems of continued processing of mail and data processing documents - Inserting machines - Part 2: Minimum information to be specified) |
DIN 32748-1-1987 |
办公技术和数据技术.工作岗位用计算机.概念和分类 |
(Office machines; personal computer; concepts and classification) |
DIN 32748-2-1987 |
办公技术和数据技术.工作岗位用计算机.最低要求 |
(Office machines; personal computers; minimum information to be specified) |
DIN 32749-1984 |
办公技术和数据技术.叠信机.最低要求 |
(Office machines; minimum information to be specified for letter folding machines) |
DIN 32750-1-1994 |
办公技术和数据技术.带四盘磁带的口授录音机磁带盒.卷带筒传动的磁带盒.尺寸和特点 |
(Office machines; magnetic tape cassette for dictation equipment with magnetic tape 4; cassette spool spindle drive; dimensions and characteristics) |
DIN 32750-2-1993 |
办公机械.带四盘磁带的口授录音机磁带盒.主导轴驱动的磁带盒.尺寸和特性 |
(Office machines; magnetic tape cassette for dictation equipment with magnetic tape 4; cassette for capstan drive; dimensions and characteristics) |
DIN 32752-1-1995 |
办公技术和数字技术.色带的检验.第1部分:标准字符A的打印.反射系数测量计数值的测定 |
(Office machines - Testing of ink ribbons - Part 1: Creation of standard imprints A and measurement of the reflectometer-factor) |
DIN 32752-2-1995 |
办公技术和数字技术.色带的检验.第2部分:一般的检验 |
(Office machines - Testing of ink ribbons - Part 2: General tests) |
DIN 32752-3-1995 |
办公技术和数字技术.色带的检验.第6部分:标准字符B的打印和色彩传送规定以及校正能力 |
(Office machines - Testing of inked ribbons - Part 3: Production of standard print B and determination of the colour transfer and ability for correction) |
DIN 32755-1-1994 |
办公技术和数字处理技术.色带.13mm宽打字带用直径30mm的卷筒 |
(Office machines; inked ribbons; part 1: spool with 30 mm und 35 mm in diameter for ribbons of 13 mm width) |
DIN 32755-2-1994 |
办公技术和数字处理技术.色带.第2部分:13mm和14.3mm宽色带分别用直径40mm和54mm的卷筒 |
(Office machines - Inked ribbons - Part 2: Spools with 40 mm and 54 mm in diameter for ribbons of 13 mm and 14,3 mm width) |
DIN 32755-3-1994 |
办公技术和数字处理技术.色带.第3部分:13mm宽打字带用直径82mm的卷筒 |
(Office machines - Inked ribbons - Part 3: Spools with 82 mm in diameter for ribbons of 13 mm width) |
DIN 32756-1995 |
办公设备.改正带、芯子和卷筒.术语、尺寸和结构 |
(Office machines - Correcting ribbons, cores, spools - Terms, dimensions, versions) |
DIN 32757-1-1995 |
办公技术和数据技术.信息载体撤消.第1部分:机器和设备的要求和检验 |
(Office machines - Destruction of information carriers - Part 1: Requirements and testing conditions for equipment and installations) |
DIN 32757-2-1985 |
办公技术和数据技术.信息载体撤消.机器和设备.最低要求 |
(Office machines; destruction of information media; machines and devices; minimum informations) |
DIN 32758-1984 |
办公技术和数据技术.计算机.微型电子计算机的键盘 |
(Office machines; calculating machines; keyboard for electronic pocket-calculators) |
DIN 32780-100-2002 |
防护服装.第100部分:频率范围为80MHz至1GHz的电磁场的防护.要求和试验方法 |
(Protective clothing - Part 100: Protection against electromagnetic fields in the frequency range from 80 MHz to 1 GHz; Requirements and test methods) |
DIN 32781-2005 |
防护服.农药防护套服 |
|
DIN 32786-1980 |
银行业务.银行存折上的磁条.磁道的构造和内容 |
(Bankdocuments; magnetic stripes on passbooks, data content for the track) |
DIN 3280-1988 |
室内装修用水管配件.公称压力10(带锥形密封)螺纹连接管.概述 |
(Valves for domestic water supply; tapered unions up to PN 10; survey) |
DIN 3281-1988 |
室内装修用水管配件.公称压力10(带锥形密封)吸水管.概述 |
(Valves for domestic water supply; tapered union nipples nominal pressure 10; survey) |
DIN 3283-1988 |
室内装修用水管配件.公称压力为10的螺纹连接管和吸水管.带内螺纹的放水接管 |
(Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads) |
DIN 3284-1988 |
室内装修用水管配件.公称压力为10的螺纹连接管和吸水管.带外螺纹的放水接管 |
(Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with external threads) |
DIN 32840-1981 |
绘图纸.天然高级透明纸 |
(Drawing papers and films; natural tracing paper) |
DIN 3285-1988 |
室内装修用水管配件.公称压力为10的螺纹连接管和吸水管.软接管 |
(Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples) |
DIN 32869-1-2005 |
技术产品文件.三维CAD(计算机辅助设计)模型.第1部分:表示要求 |
|
DIN 32869-1998 |
技术产品文献.三维CAD(计算机辅助设计)模式.图示要求 |
(Technical product documentation - Three-dimensional CAD-models - Requirements for representation) |
DIN 32869-2-2002 |
技术产品文献.三维CAD(计算机辅助设计)模式.第2部分:属性要求 |
(Technical product documentation - Three-dimensional CAD-models - Part 2: Requirements for attributes) |
DIN 32869-3-2002 |
技术产品文献.三维CAD(计算机辅助设计)模式.第3部分:特征 |
(Technical product documentation - Three-dimensional CAD-models - Part 3: Features) |
DIN 3287-1988 |
室内装修用水管配件.公称压力为10的螺纹连接管和吸水管.管路用螺纹接管 |
(Valves for domestic water supply; nipples and unions nominal pressure 10; threaded nipples for tubes) |
DIN 32876-1 Bb.1-1999 |
几何尺寸检验.电气长度测量.概述.应用示例 |
(Verification of geometrical parameters - Electrical linear measurement - General comments and application, examples) |
DIN 32876-1-1999 |
几何参数的校验.电子线性测定.第1部分:已测量数量的模拟接收.概念,要求,测试 |
Verification of geometrical parameters - Electrical linear measurement - Part 1: Analogue reception of the measured quantity; concepts, requirements, testing |
DIN 32876-2-1999 |
几何参数的校验.电子线性测定.第2部分:已测量数量的数字接收.概念,要求,测试 |
(Verification of geometrical parameters - Electrical linear measurement - Part 2: Digital reception of the measured quantity; concepts, requirements, testing) |
DIN 32877-2000 |
距离、轮廓和形式的光电测量 |
(Optoelectronic measurement of distance, profil and form) |
DIN 32878-1993 |
带绝对编码器和增量编码器的角位移测量系统 |
Angular displacement measuring systems with absolute and incremental encoders; concepts, requirements, testing |
DIN 3289-1988 |
室内装修用水管配件.公称压力为10的螺纹连接管和吸水管.螺纹锥形接管 |
Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples |
DIN 32891-1996 |
圆钢链.质量等级2,不按量规检验 |
Round steel link chains - Grade 2, non-calibrated, tested |
DIN 32895-1992 |
装载车和撒肥机用链节 |
Round steel link chains for car loaders and manure spreaders, calibrated, tested |
DIN 32896-1992 |
装载车和撒肥机用链节 |
Connecting chain links for car loaders and manure spreaders |
DIN 3291-1988 |
室内装修用水管配件.公称压力为10的螺纹连接管和吸水管.螺纹连接软管 |
Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples |
DIN 32911-1983 |
索道和雪撬运送乘客的图形符号和信息铭牌 |
Graphic symbols and signs for information of the passengers of ropeways and ski-lifts |
DIN 32912-1983 |
滑雪道上滑雪者注意事项的图形符号和标牌 |
Graphic symbols and signs for information of the skiers on skiing slopes |
DIN 32913-1993 |
越野滑雪道上滑雪者注意事项的图形符号和标志牌 |
Cross country tracks; classification, basic graphic symbols and signs for the information of cross country skiers |
DIN 32914-1983 |
山区铁路.滑雪跑道和用铭牌.要求 |
Signs for mountain railways, skiing slopes and loipes; requirements |
DIN 3292-1-1984 |
家用安装设备配件.有色金属连接螺母 |
(Fittings for domestic installation; nonferrous metal union nuts) |
DIN 3292-2-1984 |
家用安装设备配件.可锻铸铁连接螺母 |
(Fittings for domestic installation; malleable cast iron union nuts) |
DIN 32922-1997 |
冬季体育器械.远距离滑雪者目标组的说明 |
(Wintersport equipment - Description of target groups for cross country skiers) |
DIN 32926-1985 |
冬季体育器械.花样滑冰装备.概念.安全技术要求和检验 |
(Winter sports equipment; outfit for figure skating; concepts, safety requirements and testing) |
DIN 32927-1986 |
冬季体育器械.冰球装备.技术要求和检验 |
(Winter sports equipment; outfit for ice hockey skating; safety requirements and testing) |
DIN 32928-1986 |
充气式业余活动器械的打气装置.要求和检验 |
(Inflators for inflatable recreational articles; requirements and testing) |
DIN 32929-1987 |
水上运动器械.允气式船的桨和舵.安全技术要求和检验 |
(Water sports equipment; paddles and oars for inflatable boats; safety requirements and testing) |
DIN 32931-1988 |
充气式娱乐及运动器械的充排气闭锁 |
(Valves and stoppers for inflatable recreational articles; terminology, requirements, testing) |
DIN 32934-2000 |
体操和运动设备.总图 |
(Gymnastic and sport equipment - General plan) |
DIN 32935-1987 |
家庭运动器械.不固定的粒力器械.压力器械和体操器械 |
(Home sports equipment; mobile tension and pression training equipment, safety requirements, testing) |
DIN 32937-1-2000 |
检验、测量和试验设备的控制.第1部分:长度测量技术 |
(Control of inspection, measuring and test equipment - Part 1: Length measurement technique) |
DIN 32937-2-2000 |
检验、测量和试验设备的控制.第2部分:压力测量技术 |
(Control of inspection, measuring and test equipment - Part 2: Pressure measurement technique) |
DIN 32937-3-2000 |
检验、测量和试验设备的控制.第3部分:温度测量技术 |
(Control of inspection, measuring and test equipment - Part 3: Temperature measurement technique) |
DIN 32937-4-2000 |
检验、测量和试验设备的控制.第4部分:流量测量技术 |
(Control of inspection, measuring and test equipment - Part 4: Measurement of fluid flow technique) |
DIN 32971-1985 |
对残疾人的技术帮助;概念.分类特征 |
(Technical aids for the handicapped; concept, classifying characteristics) |
DIN 32974-2000 |
公共交通区的声信号.要求 |
(Acoustic signals in public traffic areas - Requirements) |
DIN 32977-1-1992 |
适合残疾人的设计.概念和普遍原则 |
(Adapted designing for disabled persons; definitions and general principles) |
DIN 32980-1987 |
从8点式盲文至7位代码的分配 |
(Adaptation of 8-dot-braille to 7-bit coded character set) |
DIN 32981-2002 |
盲人和部分弱视人用交通信号的特殊装置要求 |
(Special devices for blind and partially sighted persons on traffic signals - Requirements) |
DIN 32982-1994 |
信息处理用8点盲文字符.识别.名称.8位代码归类 |
(Information processing 8-dot-Braille graphic characters - Identifiers, names and assignation to 8-bit-codetables) |
DIN 32983-1994 |
轮椅使用者和其他肢体残疾人用车装提升装置.安全要求和检验 |
(Lifts installed on vehicles for wheelchairusers and for people restricted in their mobility - Safety requirements and testing) |
DIN 32984-2000 |
位于公共交通区的地面指示器 |
(Ground surface indicators in public traffic areas) |
DIN 32985 Berichtigung 1-2005 |
对DIN 32985-2004的勘误 |
|
DIN 32985-1998 |
使用轮椅的人和其他行动残疾人用装在轮椅上的斜面板.安全技术要求和检验 |
(Ramps installed on vehicles for wheelchair users and for people restricted in their mobility - Safety requirements and testing) |
DIN 32985-2004 |
轮椅使用者和行动不便之人用的装在运载工具上的斜坡道.安全要求和检验 |
|
DIN 32990-1-1989 |
成本知识.机器制造业的成本文献的概念 |
(Cost information; terminology of cost information documents in the machinebuilding industry) |
DIN 32991-1 Bb.1-1990 |
成本.成本信息资料的编制原则.相对成本图表举例 |
(Costs information; principles of presentation; examples for relativ costs figures) |
DIN 32991-1-1987 |
成本信息.成本信息资料.编制原理 |
(Costs informations; costs information-documents; principles of presentation) |
DIN 32992-1-1989 |
成本知识.计算原理.成本核算的方式方法 |
(Cost information; calculation principles; types and methods of calculation) |
DIN 32992-2-1993 |
成本知识.计算原理.简略核算法 |
(Costs information; calculation principles; methods short calculation) |
DIN 32992-3-1987 |
成本信息.计算基本原理.相对费用数值的推断 |
(Costs inforamtions; principles of calculation; determination of figures for relative costs) |
DIN 3319-2002 |
锥形方头毂孔弯曲手轮 |
(Hand-wheels, dished - Hub hole with tapered square) |
DIN 332-1-1986 |
60°中心孔.R、A、B和C型 |
(60?centre holes; types R, A, B, and C) |
DIN 332-2-1983 |
电机轴端用60度带螺纹的中心孔 |
(Center holes 60 with thread for shaft ends for rotating electrical machines) |
DIN 332-4-1990 |
铁路车辆的轮对轴中心孔 |
(Centre holes for rail vehicles axles) |
DIN 332-7-1982 |
机床.60°中心孔.测量方法 |
(Machine tools; 60 centre holes; dimensioning) |
DIN 332-8-1979 |
90°中心孔.S型.尺寸.测量方法 |
(Centre holes 90, form S; dimensions, determination process) |
DIN 3321-1987 |
消防栓的认可证检验和要求 |
(Requirements and acceptance tests for hydrants) |
DIN 333-1986 |
60°中心钻.R、A和B型 |
(60?centre drills; types R, A, and B) |
DIN 3334-1968 |
带法兰接头的加热混合器.三通混合器.四通混合器.公称压力6.最高温度110℃.结构尺寸 |
(Mixing valves for heating installations with flanges, three way mixing valves, four way mixing valves, ND 6 max. 110 C; installation dimensions) |
DIN 3335-1968 |
带套管接头的加热混合器.三通混合器.四通混合器.公称压力6.最高温度110℃.结构尺寸 |
(Mixing valves for heating installations with screwed ends; three way mixing valves, four way mixing valves, ND 6 max. 110 C, installation dimensions) |
DIN 3336-1968 |
焊接的加热混合器.三通混合器.四通混合器.公称压力6.最高温度110℃.结构尺寸 |
(Mixing valves for heating installations with welding neck ends; three way mixing valves, four way mixing valves, ND 6 max. 110 C, installation dimensions) |
DIN 3338-1987 |
管件的旋转传动连接.瓜形联管节的结合尺寸(C形) |
(Multi-turn valve actuator attachment; dimensions of type C driving components) |
DIN 334-1979 |
60°埋头钻 |
(Countersinks 60) |
DIN 33400 Bb.1-1978 |
劳动科学知识工作系统的形式;高度可调工作台示例 |
(Design of working systems by ergonomics; example for working platform adjustable in height) |
DIN 33402-2 Bb.1-1984 |
人体尺寸;数值;人体尺寸的实际应用 |
(Human body dimensions; values; application of body dimensions in practice) |
DIN 33402-2-1986 |
人体尺寸;数值 |
(Human body dimensions; values) |
DIN 33402-2-2005 |
人类功效学.人体尺寸:第2部分:数值 |
|
DIN 33402-3-1984 |
人体尺寸;在各种姿势和运动时的活动空间 |
(Human body dimensions; movement room at different normal positions and movements) |
DIN 33403-2-2000 |
工作场地及其环境的气候.第2部分:气候对人员热平衡的影响 |
(Climate at the workplace and in its environments - Part 2: Effect of the climate on the heat balance of human beings) |
DIN 33403-3-2001 |
工作场所及其环境中的气候.第3部分:基于选择的气候指数评价热工作场所的气候 |
(Climate at the workplace and its environments - Part 3: Assessment of the climate in the warm and hot working areas based on selected climate indices) |
DIN 33403-5-1997 |
工作场地和工作环境的气候.第5部分:低温工作场地的人类工程学设计 |
(Climate at the workplace and its environments - Teil 5: Ergonomic design of cold workplaces) |
DIN 33404-3-1982 |
工作场所用报警信号.声响报警信号.统一的紧急呼叫信号.安全技术要求.检验 |
(Danger signals for workplaces; auditory danger signals; unified emergency signal; technical requirements of safety, testing) |
DIN 33406-1988 |
生产区域工作地的尺寸.概念.工作埸地类型.工作埸地尺寸 |
(Workplace dimensions in production; terminology, types and dimensions of workplaces) |
DIN 33407-1980 |
工作分析.准则 |
(Analysis of work; criterias) |
DIN 33408-1 Bb.1-1987 |
座位用人体外形模式.应用示例 |
(Body templates for seats of all kinds; application examples) |
DIN 33408-1-1987 |
座位用人体外形模式 |
(Body templates for seats of all kinds) |
DIN 33409-1983 |
符合安全条例的劳动作业组织.指挥手势 |
(Safety in the organization of work; hand signs for guiding and directing purposes) |
DIN 3341-1989 |
柱塞空气压缩机用圆盘阀.吸气阀.压力阀.主要尺寸.材料.安装 |
(Plate valves for displacement compressors; suction valves, discharge valves; main dimensions, materials, installation) |