标准号 |
中文名称 |
英文名称 |
DIN EN 12385-9-2003 |
钢丝绳.安全.第9部分:为载人设计用索道设备的锁环钢丝绳 |
(Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons; German version EN 12385-9:2002) |
DIN EN 12386-1999 |
饮用水制备用化合物.硫酸铜 |
(Chemicals used for treatment of water intended for human consumption - Copper sulfate; German version EN 12386:1998) |
DIN EN 12386-2005 |
人类生活用水处理用化学品.硫酸铜 |
|
DIN EN 1239-1998 |
胶粘剂.冻熔稳定性 |
(Adhesives - Freeze-thaw stability; German version EN 1239:1998) |
DIN EN 12390-1-2001 |
硬化混凝土试验.第1部分:样品和模型的形状、尺寸和其他要求 |
(Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds; German version EN 12390-1:2000) |
DIN EN 12390-2-2001 |
硬化混凝土试验.第2部分:强度试验用的试样的形成和处理 |
(Testing hardened concrete - Part 2: Making and curing specimens for strength tests; German version EN 12390-2:2000) |
DIN EN 12390-3-2002 |
硬化混凝土试验.第3部分:试样的压缩强度 |
(Testing hardened concrete - Part 3: Compressive strength of test specimens; German version EN 12390-3:2001) |
DIN EN 12390-4-2000 |
硬化混凝土试验.第4部分:压缩强度.试验机规范 |
(Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; German version EN 12390-4:2000) |
DIN EN 12390-5-2001 |
硬化混凝土试验.第5部分:试样的结构强度 |
(Testing hardened concrete - Part 5: Textural strength of test specimens; German version EN 12390-5:2000) |
DIN EN 12390-6-2001 |
硬化混凝土试验.第6部分:试样的劈裂拉伸强度 |
(Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2000) |
DIN EN 12390-7-2001 |
硬化混凝土试验.第7部分:硬化混凝土的密度 |
(Testing hardened concrete - Part 7: Density of hardened concrete; German version EN 12390-7:2000) |
DIN EN 12390-8-2001 |
硬化混凝土试验.第8部分:加压条件下水的渗透深度 |
(Testing hardened concrete - Part 8: Depth of penetration of water under pressure; German version EN 12390-8:2000) |
DIN EN 12391-1-2004 |
烟囱.金属烟囱用执行标准.第1部分:非室内密封的加热设备用烟囱 |
|
DIN EN 12392-2000 |
铝和铝合金.锻造产品.用于压力设备生产的产品的特殊要求 |
(Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment; German version EN 12392:2000) |
DIN EN 12393-1-1998 |
清淡食品.农药残流物气相色谱测定用多种残留法.第1部分:概述 |
(Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 1: General considerations; German version EN 12393-1:1998) |
DIN EN 12393-2-1998 |
清淡食品.农药残流物气相色谱测定用多种残留法.第2部分:萃取和净化的方法 |
(Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 2: Methods for extraction and clean-up; German version EN 12393-2:1998) |
DIN EN 12393-3-1998 |
清淡食品.农药残流物气相色谱测定用多种残留法.第2部分:测定和保障的方法 |
(Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 3: Determination and confirmatory tests; Version allemande EN 12393-3:1998) |
DIN EN 12396-1-1998 |
清淡食品.二硫化基甲酸盐和二硫化四烷基秋兰姆残流物的测定.第1部分:分光光度法 |
(Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 1: Spectrometric method; German version EN 12396-1:1998) |
DIN EN 12396-2-1998 |
清淡食品.二硫化基甲酸盐和二硫化四烷基秋兰姆残流物的测定.第2部分:色相气谱法 |
(Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 2: Gas chromatographic method; German version EN 12396-2:1998) |
DIN EN 12396-3-2000 |
清淡食品.二硫化基甲酸盐和二硫化四烷基秋兰姆残留物的测定.第3部分:紫外分光光度法 |
(Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV-spectrometric xanthogenate method; German version EN 12396-3:2000) |
DIN EN 12397-2005 |
载人用索道装置的安全要求.操作 |
|
DIN EN 124-1994 |
排水设备的排水沟盖和人孔盖.结构原理.检验.标志.质量监督 |
(Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, testing, marking, quality control; German version EN 124:1994) |
DIN EN 1240-1998 |
胶粘剂.羟基值和/或羟基含量的测定 |
(Adhesives - Determination of hydroxyl value and/or hydroxyl content; German version EN 1240:1998) |
DIN EN 12400-2003 |
窗户和人行门.机械耐久性.要求和分类 |
(Windows and pedestrian doors - Mechanical durability - Requirements and classification; German version EN 12400:2002) |
DIN EN 12402-1999 |
铅和铅合金.分析取样方法 |
(Lead and lead alloys - Methods of sampling for analysis; German version EN 12402:1999) |
DIN EN 12403-1998 |
条码.结构数据组 |
(Bar coding - Structured data files; German version EN 12403:1998) |
DIN EN 12406-1999 |
交换容器.C级热交换容器.尺寸和一般要求 |
(Swap bodies - Thermal swap bodies of class C - Dimensions and general requirements; German version EN 12406:1999) |
DIN EN 12407-2000 |
天然石料试验方法.岩石检验 |
(Natural stone test methods - Petrographic examination; German version EN 12407:2000) |
DIN EN 12408-2005 |
载人员用索道装置的安全要求.质量控制 |
|
DIN EN 12409-1999 |
橡胶和塑料机械.热成形机械.安全要求 |
(Rubber and plastics machines - Thermoforming machines - Safety requirements; German version EN 12409:1999) |
DIN EN 1241-1998 |
胶粘剂.酸值测定 |
(Adhesives - Determination of acid value; German version EN 1241:1998) |
DIN EN 12410-1999 |
交换容器.A级热交换容器.尺寸和一般要求 |
(Swap bodies - Thermal swap bodies of class A - Dimensions and general requirements; German version EN 12410:1999) |
DIN EN 12413-1999 |
化合磨料制磨具的安全性要求 |
(Safety requirements for bonded abrasive products; German version EN 12413:1999) |
DIN EN 12414-2000 |
车辆停车控制设备.付款和售票机 |
(Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements; German version EN 12414:1999) |
DIN EN 12415-2003 |
机床的安全.小型数控车床和车床顶尖 |
(Safety of machine tools - Small numerically controlled turning machines and turning centres (includes Amendment A1:2002); German version EN 12415:2000 + A1:2002) |
DIN EN 12416-1-2001 |
固定灭火系统.粉末系统.第1部分:件的要求和试验方法 |
(Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components; German version EN 12416-1:2001) |
DIN EN 12416-1/A1-2004 |
固定灭火系统.粉末系统.第1部分:件的要求和试验方法 |
|
DIN EN 12416-2-2001 |
固定灭火系统.粉末系统.第2部分:设计、制造和维修 |
(Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance; German version EN 12416-2:2001) |
DIN EN 12417-2001 |
机床的安全.组合加工中心机床 |
(Safety of machine tools - Machining centres; German version EN 12417:2001) |
DIN EN 12418-2000 |
施工现场用砖石和石材切断机.安全 |
(Masonry and stone cutting-off machines for job site - Safety; German version EN 12418:2000) |
DIN EN 12419-1999 |
呼吸防护设备.带全面罩、半面罩或四分之一面罩的轻型压缩气体线性呼吸仪器.要求、试验、标记 |
(Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a full face masks, half masks or quarter masks - Requirements, testing, marking; German version EN 12419:1999) |
DIN EN 1242-1998 |
胶粘剂.异氰酸脂的测定 |
(Adhesives - Determination of isocyanate value; German version EN 1242:1998) |
DIN EN 12420-1999 |
铜和铜合金.锻件 |
(Copper and copper alloys - Forgings; German version EN 12420:1999) |
DIN EN 12421-1998 |
镁和镁合金.纯镁 |
(Magnesium and magnesium alloys - Unalloyed magnesium; German version EN 12421:1998) |
DIN EN 12422-1999 |
西沙尔麻包扎麻绳 |
(Sisal twines; German version 12422:1999) |
DIN EN 12423-1999 |
聚丙烯包扎麻绳 |
(Polypropylene twines; German version EN 12423:1999) |
DIN EN 12424-2000 |
工业、商业用汽车库门.抗风荷载特性.分类 |
(Industrial, commercial and garage doors and gates - Resistance to wind load - Classification; German version EN 12424:2000) |
DIN EN 12425-2000 |
工业、商业用汽车库门.耐水渗透特性.分类 |
(Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification; German version EN 12425:2000) |
DIN EN 12426-2000 |
工业、商业用汽车库门.透气率.分类 |
(Industrial, commercial and garage doors and gates - Air permeability - Classification; German version prEN 12426:2000) |
DIN EN 12427-2000 |
工业、商业用汽车库门.透气率.试验方法 |
(Industrial, commercial and garage doors and gates - Air permeability - Test method; German version prEN 12427:2000) |
DIN EN 12428-2000 |
工业、商业用汽车库门.热传递系数.计算要求 |
(Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation; German version EN 12428:2000) |
DIN EN 12429-1998 |
建筑业用隔热材料.在特定的温度和湿度条件下调节平衡湿度 |
(Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions; German version EN 12429:1998) |
DIN EN 1243-1999 |
胶粘剂.氨基和氨基甲醛冷凝缩合物中游离甲醛含量的测定 |
(Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates; German version EN 1243:1998) |
DIN EN 12430-1998 |
建筑业用隔热材料.集中负荷下性能的测定 |
(Thermal insulating products for building applications - Determination of behaviour under point load; German version EN 12430:1998) |
DIN EN 12431-1998 |
建筑业用隔热材料.夹层地板中隔热材料厚度的测定 |
(Thermal insulating products for building applications - Determination of thickness for floating floor insulating products; German version EN 12431:1998) |
DIN EN 12432-1998 |
体操器械.平衡木.功能和安全技术要求.检验方法 |
(Gymnastic equipment - Balancing beams - Functional and safety requirements; test methods; German version EN 12432:1998) |
DIN EN 12433-1-2000 |
工业和商用车库门及大门.术语.第1部分:门的类型 |
(Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors; Trilingual version EN 12433-1:1999) |
DIN EN 12433-2-2000 |
工业和商用车库门及大门.术语.第2部分:门的部件 |
(Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors; Trilingual version EN 12433-2:1999) |
DIN EN 12434-2000 |
低温容器.低温软管 |
(Cryogenic vessels - Cryogenic flexible hoses; German version EN 12434:2000) |
DIN EN 12436-2002 |
承重木结构用胶粘剂.酪蛋白胶粘剂.分类和性能要求 |
(Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements; German version EN 12436:2001) |
DIN EN 12438-1998 |
镁和镁合金.铸件阳极用镁合金 |
(Magnesium and magnesium alloys - Magnesium alloys for cast anodes; German version EN 12538:1998) |
DIN EN 12439-1998 |
一次性无菌直肠导管 |
(Sterile rectal catheters for single use; German version EN 12439:1998) |
DIN EN 1244-1998 |
胶粘剂.在光线作用下粘接涂层的颜色和/或颜色变化的测定 |
(Adhesives - Determination of the colour and/or colour changes of adhesives coats under the influence of light; German version EN 1244:1998) |
DIN EN 12440-2001 |
天然石料.命名标准 |
(Natural stone - Denomination criteria; German version EN 12440:2000) |
DIN EN 12441-1-2002 |
锌及锌合金.化学分析.第1部分:锌合金中铝的测定.滴定法 |
(Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric method; German version EN 12441-1:2001) |
DIN EN 12441-1-2004 |
锌及锌合金.化学分析.第1部分:锌合金中铝的测定.滴定法 |
|
DIN EN 12441-2-2002 |
锌及锌合金.化学分析.第2部分:锌合金中镁的测定.火焰原子吸收光谱法 |
(Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys; Flame atomic absorption spectrometric method; German version EN 12441-2:2001) |
DIN EN 12441-3-2002 |
锌及锌合金.化学分析.第3部分:铅、镉、铜的测定.火焰原子吸收光谱法 |
(Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper; Flame atomic absorption spectrometric method; German version EN 12441-3:2001) |
DIN EN 12441-4-2003 |
锌及锌合金.化学分析.第4部分:锌合金中铁的测定.分光光度法 |
(Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys - Spectrophotometric method; German version EN 12441-4:2003) |
DIN EN 12441-5-2003 |
锌及锌合金.化学分析.第5部分:初级锌中铁的测定.分光光度法 |
(Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc - Spectrophotometric method; German version EN 12441-5:2003) |
DIN EN 12441-6-2003 |
锌及锌合金.化学分析.第6部分:铝和铁的测定.火焰原子吸收光谱法 |
(Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron - Flame atomic absorption spectrometric method; German version EN 12441-6:2003) |
DIN EN 12442-1-2001 |
用于医疗装置生产中的动物组织及其诱导生成物.第1部分:分析和风险管理 |
(Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 1: Analysis and management of risk; German version EN 12442-1:2000) |
DIN EN 12442-2-2001 |
用于医疗装置生产中的动物组织及其诱导生成物.第2部分:资源、收集和处理控制 |
(Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 2: Controls on sourcing, collection and handling; German version EN 12442-2:2000) |
DIN EN 12442-3-2001 |
用于医疗装置生产中的动物组织及其诱导生成物.第3部分:病毒和传输剂的消除和/或失效的证实 |
(Animal tissue and their derivatives utilized in the manufacture of medical devices - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible agents; German version EN 12442-3:2000) |
DIN EN 12444-2001 |
工业、商用和车库门.防风.试验和计算 |
(Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation; German version EN 12444:2000) |
DIN EN 12445-2001 |
工业、商用和车库门.动力门的使用安全.试验方法 |
(Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods; German version EN 12445:2000) |
DIN EN 12446-2003 |
烟囱.部件.混凝土外墙构件 |
(Chimneys - Components - Concrete outer wall elements; German version EN 12446:2003) |
DIN EN 12447-2002 |
土工织物及其有关产品.测定耐水解作用的筛分试验方法 |
(Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water; German version EN 12447:2001) |
DIN EN 12449-1999 |
铜和铜合金.通用无缝圆管 |
(Copper and copper alloys - Seamless, round tubes for general purposes; German version EN 12449:1999) |
DIN EN 1245-1998 |
胶粘剂.pH值测定.检验方法 |
(Adhesives - Determination of pH - Test method; German version EN 1245:1998) |
DIN EN 12450-1999 |
铜和铜合金.铜制无缝圆型毛细管 |
(Copper and copper alloys - Seamless, round copper capillary tubes; German version EN 12450:1999) |
DIN EN 12451-1999 |
铜和铜合金.热交换器用无缝圆管 |
(Copper and copper alloys - Seamless, round tubes for heat exchangers; German version EN 12451:1999) |
DIN EN 12452-1999 |
铜和铜合金.热交换器用无缝轧制加筋管 |
(Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers; German version EN 12452:1999) |
DIN EN 12453-2001 |
工业、商用和车库门.动力门的使用安全.要求 |
(Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements; German version EN 12453:2000) |
DIN EN 12454-1998 |
铸造.表面缺陷的目测检验.钢砂铸件 |
(Founding - Visual examination of surface discontinuities - Steel sand castings; German version EN 12454:1998) |
DIN EN 12455-1999 |
弹性地板覆盖物.软木垫底层规范 |
(Resilient floor coverings - Specification for corkment underlay; German version EN 12455:1999) |
DIN EN 12457-1-2003 |
废弃物的表征.浸析.颗粒废弃物和污泥浸析的一致性试验.第1部分:粒径小于4mm的材料在液体、固体比为2l/kg的 |
(Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 1: One stage batch test at a liquid to solid ration of 2 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-1:2002 |
DIN EN 12457-2-2003 |
废弃物的表征.浸析.颗粒废弃物和污泥浸析的一致性试验.第2部分:粒径小于4mm的材料在液体、固体比为10l/kg的 |
(Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-2:2002 |
DIN EN 12457-3-2003 |
废弃物的表征.浸析.颗粒废弃物和污泥浸析的一致性试验.第3部分:高固体含量的粒径小于4mm的材料在液体、固体 |
(Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 mm |
DIN EN 12457-4-2003 |
废弃物的表征.浸析.颗粒废弃物和污泥浸析的一致性试验.第4部分:粒径小于10mm的材料在液体、固体比为10l/kg |
(Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size red |
DIN EN 12458-1999 |
表面活性材料.耐硬水性能的测定 |
(Surface active agents - Determination of stability in hard water; German version EN 12458:1999) |
DIN EN 1246-1998 |
胶粘剂.灰分含量和硫酸盐灰分含量的测定 |
(Adhesives - Determination of ash and sulphated ash; German version EN 1246:1998) |
DIN EN 12460-1998 |
生物技术.大比例工艺法和生产.与生物危险性相适应的仪器和装备的选择和安装的指南 |
(Biotechnology - Large-scale process and production - Guidance on equipment selection and installation in accordance with the biological risk; German version EN 12460:1998) |
DIN EN 12461-1998 |
生物技术.大比例工艺法和生产.废料的搬运,钝性化和检验的指南 |
(Biotechnology - Large-scale process and production - Guidance for the handling, inactivating and testing of waste; German version EN 12461:1998) |
DIN EN 12462-1998 |
生物技术.泵的性能标准 |
(Biotechnology - Performance criteria for pumps; German version EN 12462:1998) |
DIN EN 12463-2005 |
食品加工机械.填充和辅助机器.安全和卫生要求 |
|
DIN EN 12464-1-2003 |
光和照明.工作场所照明.第1部分:户内 |
(Light and lighting - Lighting of work places - Part 1: Indoor work places; German version EN 12464-1:2002) |
DIN EN 12465-2002 |
架空线用木杆.耐久性要求 |
(Wood poles for overhead lines - Durability requirements; German version EN 12465:2001) |
DIN EN 12466-1998 |
弹性地板铺面.术语 |
(Resilient floor coverings - Vocabulary; German version EN 12466:1998) |
DIN EN 12467 Berichtigung 1-2001 |
DINEN12467:2000-09的勘误 |
(Corrigendum to DIN EN 12467:2000-09 (EN 12467:2000/AC:2000)) |
DIN EN 12467-2000 |
纤维水泥平板材.产品规范和试验方法 |
(Fibre-cement flat sheets - Product specifications and test methods; German version EN 12467:2000) |
DIN EN 12468-1998 |
生物技术.置于环境中的变异有机物.在有目的的释放遗传变异植物的情况下监测策略指南 |
(Biotechnology - Modified organisms for application in the environment - Guidance for the monitoring strategies for deliberate releases of genetically modified plants; German version EN 12468:1997) |
DIN EN 12469-2000 |
生物技术.微生物安全箱的性能标准 |
(Biotechnology - Performance criteria for microbiological safety cabinets; German version EN 12469:2000) |
DIN EN 1247-2004 |
铸造机械.戽斗、浇注设备、离心铸造机、连续和半连续铸造机的安全要求 |
|
DIN EN 12470-1-2000 |
体温计.第1部分:大刻度的玻璃内有金属液体的温度计 |
(Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device; German version EN 12470-1:2000) |
DIN EN 12470-2-2001 |
体温计.第2部分:相位变换式体温计 |
(Clinical thermometers - Part 2: Phase change-type (dot matrix) thermometers; German version EN 12470-2:2000) |
DIN EN 12470-3-2000 |
体温计.第3部分:大刻度的小型电测温度计的性能(可预测和不可预测的) |
(Clinical thermometers - Part 3: Performance of compact electrical thermometers (predictive and non-predictive) with maximum device; German version EN 12470-3:2000) |
DIN EN 12470-4-2001 |
体温计.第4部分:连续测量用电子体温计的性能 |
(Clinical thermometers - Part 4: Performance of electrical thermometers for continous measurement; German version EN 12470-4:2000) |
DIN EN 12470-5-2003 |
体温计.第5部分:(大刻度的)耳蜗式红外测温计的性能 |
(Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device); German version EN 12470-5:2003) |
DIN EN 12472-1999 |
验证预涂层物件的镍释放用模拟磨损检验和腐蚀检验 |
(Method for the simulation of wear and corrosion for the detection of nickel release from coated items; German version EN 12472:1998) |
DIN EN 12473-2000 |
海水中阴极保护的一般原理 |
(General principles of cathodic protection in sea water; German version EN 12473:2000) |
DIN EN 12474-2001 |
海底管道的阴极保护 |
(Cathodic protection for submarine pipelines; German version EN 12474:2001) |
DIN EN 12475-1-1998 |
密封成形的耐火产品的分级.第1部分:铝-硅酸盐-产品 |
(Classification of dense shaped refractory products - Part 1: Alumina-silica products; German version EN 12475-1:1998) |
DIN EN 12475-2-1998 |
密封成形的耐火产品的分级.第2部分:具有物质成份小于7%的残余碳的基础产品 |
(Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon; German version EN 12475-2:1998) |
DIN EN 12475-3-1998 |
密封成形的耐火产品的分级.第3部分:具有物质成份7%至30%的残余碳的基础产品 |
(Classification of dense shaped refractory products - Part 3: Basic products containing 7 % to 30 % residual carbon; German version EN 12475-3:1998) |
DIN EN 12475-4-1999 |
密封成形的耐火产品的分级.第4部分:特殊产品 |
(Classification of dense shaped refractory products - Part 4: Special products; German version EN 12475-4:1998) |
DIN EN 12476-2001 |
金属的磷酸盐转化涂层.特殊要求的方法 |
(Phosphate conversion coatings of metals - Method of specifying requirements; German version EN 12476:2000) |
DIN EN 12477-2002 |
焊工用防护手套 |
(Protective gloves for welders; German version EN 12477:2001) |
DIN EN 12477-2005 |
焊工用防护手套 |
|
DIN EN 12478-2001 |
机床的安全.大型数字控制的回转机和回转中心 |
(Safety of machine tools - Large numerically controlled turning machines and turning centres; German version EN 12478:2000) |