标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 3743-1-1995 |
声学.噪声源声功率级的测定.在混响声场中小声源和移动声源的工程测量方法.第1部分:硬墙试验室的比较分析法 |
Acoustics - Determination of sound power levels of noise sources; engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994); German version EN ISO 3743-1:1995 |
| DIN EN ISO 3743-2-1996 |
声学.利用声压对噪声源混响场噪声源声功率级的测定.在混响场中对小声源,可移动声源的工程测量方法.第2部分:用专用混响试验室的测量方法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994); German version EN ISO 37 |
| DIN EN ISO 3744-1995 |
声学.噪声源音响功率级的测定.反射平面上基本自由声场用2级精度包面法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essential free field over a reflecting plane (ISO 3744:1994); German version EN ISO 3744:1995 |
| DIN EN ISO 3745-2004 |
声学.利用声压测定噪声源的声功率级.消声室和半消声室的精确方法 |
|
| DIN EN ISO 3746-1995 |
声学.声压测量产生的噪音源的声功率级测定.反射平面上3级精度包面法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995); German version EN ISO 3746:1995 |
| DIN EN ISO 3747-2001 |
声学.用声压测定噪声源的声级 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method for use in situ (ISO 3747:2000); German version EN ISO 3747:2000 |
| DIN EN ISO 3759-1995 |
纺织品.测定尺寸变化试验用织物样品和服装的制备、标记和测量 |
Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:1994); German version EN ISO 3759:1995 |
| DIN EN ISO 376-2003 |
金属材料.单轴向试验机验证用作用力检验仪的校准 |
Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:1999); German version EN ISO 376:2002 |
| DIN EN ISO 376-2005 |
金属材料.单轴向试验机验证用作用力检验仪的校准 |
|
| DIN EN ISO 3766 Berichtigung 1-2005 |
对DIN EN ISO 3766-2004的勘误 |
|
| DIN EN ISO 3766-2004 |
建筑工程制图.钢筋混凝土的简化画法 |
|
| DIN EN ISO 377-1997 |
钢和钢产品.机械试验用试样和试件的定位与制备 |
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997); German version EN ISO 377:1997 |
| DIN EN ISO 3785-1995 |
钢.试件轴线的规定 |
Steel - Designation of test piece axes (ISO 3785:1976); German version EN ISO 3785:1995 |
| DIN EN ISO 3796-2002 |
船舶和航海技术.外开单扇门的净宽 |
Ships and marine technology - Clear openings for external single-leaf doors (ISO 3796:1999); German version EN ISO 3796:2001 |
| DIN EN ISO 3815-2-2005 |
锌和锌合金.第2部分:用感应耦合等离子体光辐射光谱测定法分析 |
|
| DIN EN ISO 3822-1-1999 |
声学.试验室中检验供水设备上管件和装置中发出的噪声的性质.第1部分:测量方法 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999); German version EN ISO 3822-1:1999 |
| DIN EN ISO 3822-2-1995 |
声学.由供水设施和设备发出噪音的实验室试验.第2部分:放水龙头和混合电池的安装和工作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995); German version EN ISO 3822-2:1995 |
| DIN EN ISO 3822-3-1997 |
声学.在实验室里检测供水站使用的装置和设备发出的燥音的特性.第3部分:管线上用的管件的连接和操作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997); German version EN ISO 3822-3:1997 |
| DIN EN ISO 3822-4-1997 |
声学.在实验室里检测供水站使用的装置和设备发出的燥音的特性.第4部分:特殊管件用连接和操作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances (ISO 3822-4:1997); German version EN ISO 3822-4:1997 |
| DIN EN ISO 3823-1-1999 |
牙科用旋转器械.牙钻.第1部分:钢制牙钻和硬质合金牙钻 |
Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823-1:1997); German version EN ISO 3823-1:1998 |
| DIN EN ISO 3826-1-2004 |
人体血液和血液成分用折式塑料容器.第1部分:常规容器 |
|
| DIN EN ISO 3830-1995 |
石油产品.汽油中铅含量的测定.一氯化碘法 |
Petroleum products - Determination of lead content of gasoline - Iodine monochlorid method (ISO 3830:1993); German version EN ISO 3830:1995 |
| DIN EN ISO 3838-1995 |
原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞阻比重瓶法和带刻度双毛细菅比重瓶法 |
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:1983); German version EN ISO 3838:1995 |
| DIN EN ISO 3838-2004 |
原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞比重瓶和带刻度双毛细管比重瓶法 |
|
| DIN EN ISO 3861-1997 |
喷砂用橡胶软管.要求 |
Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995); German version EN ISO 3861:1997 |
| DIN EN ISO 3868-1995 |
金属和其他无机物涂层.涂层厚度的测量.菲索(Fizeau)多光束干涉仪法 |
Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976); German version EN ISO 3868:1994 |
| DIN EN ISO 3882-1995 |
金属和其他无机物涂层.厚度测量方法述评 |
Metallic and other non-organic coatings - Review of methods of measurement of thickness (ISO 3882:1986); German version EN ISO 3882:1994 |
| DIN EN ISO 389-1-2000 |
声学.音响设备校正用参考零点.第1部分:纯音和耳挂式耳机用参考等效阈声压级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent treshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:1998); German version EN ISO 389-1:2000 |
| DIN EN ISO 389-2-1996 |
声学.音响设备校正标准参考零点.第2部分:纯音和插入式耳机用参考等效最低限度声级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones (ISO 389-2:1994); German version EN ISO 389-2:1996 |
| DIN EN ISO 389-3-1999 |
声学.音响设备校正标准参考零点.第3部分:纯音和骨传导耳机用参考等效极限声级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators (ISO 389-3:1994, including Technical Corrigendum 1:1995); German version EN ISO 389-3:1998 |
| DIN EN ISO 389-4-1999 |
声学.音响设备校正标准参考零点.第4部分:窄带遮敝噪声用参考声级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994); German version EN ISO 389-4:1998 |
| DIN EN ISO 389-5-2000 |
声学.听力测定设备校正参考零点.频率范围8kHz-16kHz的纯音参考相等的阈值声音压力水平 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequence range 8 kHz to 16 kHz (ISO/TR 389-5:1998); German version EN ISO 389-5:1999 |
| DIN EN ISO 389-7-1998 |
声学.音响设备的校正标准基准水平.第7部分:自由声波场和扩散声场条件下的基准听觉阈 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:1996); German version EN ISO 389-7:1998 |
| DIN EN ISO 389-8-2004 |
声学.校准听力设备的基准零级.第8部分:纯音和环绕式耳机的基准等效阈声压级 |
|
| DIN EN ISO 3892-2001 |
金属材料的转化涂层.单位面积涂层质量的测定.重量分析法 |
Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); German version EN ISO 3892:2001 |
| DIN EN ISO 3915-1999 |
塑料.导电塑料电阻率的测量 |
Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999 |
| DIN EN ISO 3927-2002 |
金属粉末(不包括硬质合金粉末).单轴向压缩时压塑性(压缩性)的测定 |
Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2001); German version EN ISO 3927:2001 |
| DIN EN ISO 3947-1994 |
天然或加工淀粉.脂肪总含量的测定 |
Starches, native or modified - Determination of total fat content (ISO 3947:1977); German version EN ISO 3947:1994 |
| DIN EN ISO 3950-1997 |
牙科学.牙齿和口腔区的名称体系 |
Dentistry - Designation system for teeth and areas of the oral cavity (ISO 3950:1995); German version EN ISO 3950:1997 |
| DIN EN ISO 3961-1999 |
动植物脂肪和油.碘值的测定 |
Animal and vegetable fats and oils - Determination of iodine value (ISO 3961:1996); German version EN ISO 3961:1999 |
| DIN EN ISO 3977-5-2003 |
燃气轮机.采购.第5部分:石油和天然气工业的应用 |
Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001); German and English version EN ISO 3977-5:2003 |
| DIN EN ISO 3993-1995 |
液化石油气和轻质烃类.密度或相对密度的测定.压力石油密度计法 |
Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984); German version EN ISO 3993:1995 |
| DIN EN ISO 3994-2000 |
塑料软管.含水物质的抽吸和排放用螺旋热塑强化的热塑塑料软管.规范 |
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998); German version EN ISO 3994:2000 |
| DIN EN ISO 4014-2001 |
六角头螺栓.产品等级A和B |
Hexagon head bolts - Product grades A and B (ISO 4014:1999); German version EN ISO 4014:2000 |
| DIN EN ISO 4016-2001 |
六角头螺栓.产品等级C |
Hexagon head bolts - Product grade C (ISO 4016:1999); German version EN ISO 4016:2000 |
| DIN EN ISO 4017-2001 |
六角头螺钉.产品等级A和B |
Hexagon head screws - Product grades A and B (ISO 4017:1999); German version EN ISO 4017:2000 |
| DIN EN ISO 4018-2001 |
六角头螺钉.产品等级C |
Hexagon head screws - Product grade C (ISO 4018:1999); German version EN ISO 4018:2000 |
| DIN EN ISO 4023-1995 |
蒸汽用橡胶软管.试验方法 |
Rubber hoses for steam - Test methods (ISO 4023:1991); German version EN ISO 4023:1995 |
| DIN EN ISO 4026-2004 |
内六角平端紧定螺钉 |
|
| DIN EN ISO 4027-2004 |
内六角锥端紧定螺钉 |
|
| DIN EN ISO 4028-2004 |
内六角圆柱端紧定螺钉 |
|
| DIN EN ISO 4029-2004 |
内六角凹端紧定螺钉 |
|
| DIN EN ISO 4032-2001 |
1型六角螺母.产品等级A和B |
Hexagon nuts, style 1 - Product grades A and B (ISO 4032:1999); German version EN ISO 4032:2000 |
| DIN EN ISO 4033-2001 |
2型六角螺母.产品等级A和B |
Hexagon nuts, style 2 - Product grades A and B (ISO 4033:1999); German version EN ISO 4033:2000 |
| DIN EN ISO 4034-2001 |
六角螺母.产品等级C |
Hexagon nuts - Product grade C (ISO 4034:1999); German version EN ISO 4034:2000 |
| DIN EN ISO 4035-2001 |
六角薄螺母(倒角).产品等级A和B |
Hexagon thin nuts (chamfered) - Product grades A and B (ISO 4035:1999); German version EN ISO 4035:2000 |
| DIN EN ISO 4036-2001 |
六角薄螺母(不倒角).产品等级B |
Hexagon thin nuts (unchamfered) - Product grade B (ISO 4036:1999); German version EN ISO 4036:2000 |
| DIN EN ISO 4042-2001 |
紧固件.电解涂层(ISO 4042:1999) |
Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999 |
| DIN EN ISO 4044-1998 |
皮革.化学试验用试样的制备 |
Leather - Preparation of chemical test samples (ISO 4044:1977); German version EN ISO 4044:1998 |
| DIN EN ISO 4045-1998 |
皮革.pH值的测定 |
Leather - Determination of pH (ISO 4045:1977); German version EN ISO 4045:1998 |
| DIN EN ISO 4047-1998 |
皮革.硫酸化总灰分和硫酸化不溶于水灰分的测定 |
Leather - Determination of sulphated total ash and sulphated water-insoluble ash (ISO 4047:1977); German version EN ISO 4047:1998 |
| DIN EN ISO 4048-1998 |
皮革.溶解在二氯甲烷中的物质的测定 |
Leather - Determination of matter soluble in dichloromethane (ISO 4048:1977); German version EN ISO 4048:1998 |
| DIN EN ISO 4049-2001 |
牙科学.可复原的封胶材料制成的聚脂填充物 |
Dentistry - Polymer-based filling, restorative and luting materials (ISO 4049:2000); German version EN ISO 4049:2000 |
| DIN EN ISO 4063-2000 |
焊接及有关工艺.工艺和参考值的命名 |
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998); German version EN ISO 4063:2000 |
| DIN EN ISO 407-2005 |
小型医用气瓶.针导轭式阀连接 |
|
| DIN EN ISO 4073-2005 |
牙科设备.牙科治疗室设备项目.识别体系 |
|
| DIN EN ISO 4074-2002 |
天然橡胶阴茎套的要求和试验方法 |
Natural latex condoms - Requirements and test methods (ISO 4074:2002); German version EN ISO 4074:2002 |
| DIN EN ISO 4080-1995 |
橡胶和塑料软管及软管组件.透气性测定 |
Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:1991); German version EN ISO 4080:1995 |
| DIN EN ISO 4090-2004 |
摄影.医用射线摄影盒式磁带/屏幕/胶片和硬拷贝成像胶片.尺寸和规范 |
|
| DIN EN ISO 4119-1996 |
纸浆.浆料浓度的测定 |
Pulps - Determination of stock concentration (ISO 4119:1995); German version EN ISO 4119:1996 |
| DIN EN ISO 4126-1-2004 |
过压保护安全设备.第1部分:安全阀 |
|
| DIN EN ISO 4126-2-2003 |
过压保护安全设备.第2部分:防爆板安全设备 |
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003); German version EN ISO 4126-2:2003 |
| DIN EN ISO 4126-4-2004 |
过压保护安全设备.第4部分:安全操作导阀 |
|
| DIN EN ISO 4126-5-2004 |
过压保护安全设备.第5部分:可控安全减压系统 |
|
| DIN EN ISO 4126-6-2004 |
过压保护安全设备.第6部分:安全隔板的应用、选择和安装 |
|
| DIN EN ISO 4126-7-2004 |
过压保护安全设备.第7部分:通用数据 |
|
| DIN EN ISO 4135-2002 |
麻醉和呼吸设备.词汇 |
Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001); Trilingual version EN ISO 4135:2001 |
| DIN EN ISO 4142-2003 |
实验室玻璃器皿.试管 |
Laboratory glassware - Test tubes (ISO 4142:2002); German version EN ISO 4142:2002 |
| DIN EN ISO 4157-1-1999 |
建筑用图纸.制图系统.第1部分:建筑物和建筑部分 |
Construction drawings - Designation systems - Part 1: Buildings and parts of buildings (ISO 4157-1:1998); German version EN ISO 4257-1:1998 |
| DIN EN ISO 4157-2-1999 |
建筑用图纸.制图系统.第2部分:房间名称与号码 |
Construction drawings - Designation systems - Part 2: Room names and numbers (ISO 4157-2:1998); German version EN ISO 4157-2:1998 |
| DIN EN ISO 4157-3-1999 |
建筑用图纸.制图系统.第3部分:房间标识 |
Construction drawings - Designation systems - Part 3: Room identifiers (ISO 4157-3:1998); German version EN ISO 4157-3:1998 |
| DIN EN ISO 4165-2004 |
道路车辆.电气连接.双极连接 |
|
| DIN EN ISO 4256-1999 |
液化石油气.蒸汽压力的测定.液化石油气法 |
Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996); German version EN ISO 4256:1998 |
| DIN EN ISO 4257-2002 |
液化石油气.取样方法 |
Liquefied petroleum gases - Method of sampling (ISO 4257:2001); German version EN ISO 4257:2001 |
| DIN EN ISO 4259-1996 |
石油产品.试验方法精度用数值的测定和应用 |
Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:1992 + Cor 1:1993); German version EN ISO 4259:1995 |
| DIN EN ISO 4264-1996 |
石油产品.用四个可变等式法对柴油燃料十六烷指数的计算 |
Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:1995); German version EN ISO 4264:1996 |
| DIN EN ISO 4267-2-1996 |
石油和液体石油制品.油量的计算.第2部分:动态测量 |
Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurement (ISO 4267-2:1988); German version EN ISO 4267-2:1995 |
| DIN EN ISO 4287-1998 |
几何产品规范(GPS).表面结构:轮廓法.术语,定义和表面结构的参数 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997); German version EN ISO 4287:1998 |
| DIN EN ISO 4288-1998 |
几何制品规范(GPS).表面构造:断面法.表面构造评估的规则和程序 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996); German version EN ISO 4288:1997 |
| DIN EN ISO 4320-1997 |
非离子表面活性剂.浊点指数的测定.容量法 |
Non-ionic surface active agents - Determination of cloud point-index - Volumetric method (ISO 4320:1977, including Erratum:1980); German version EN ISO 4320:1997 |
| DIN EN ISO 4375-2004 |
水文测验.河流测量用索道系统 |
|
| DIN EN ISO 445-1998 |
物料装卸用托盘.词汇 |
Pallets for materials handling - Vocabulary (ISO 445:1996); German version EN ISO 445:1998 |
| DIN EN ISO 449-1999 |
船舶和航海技术.磁罗盘,罗盘座和方位判读装置.A级 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class A (ISO 449:1997); German version EN ISO 449:1999 |
| DIN EN ISO 4490-2002 |
金属粉末.用校准漏斗(霍尔流量计)测定流动时间 |
Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2001); German version EN ISO 4490:2001 |
| DIN EN ISO 4516-2002 |
金属和其他无机镀层.维氏硬度计和努氏显微硬度试验机 |
Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002); German version EN ISO 4516:2002 |
| DIN EN ISO 4518-1995 |
金属镀层.镀层厚度的测量.表面光法度轮廓仪法 |
Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980); German version EN ISO 4518:1995 |
| DIN EN ISO 4524-3-1995 |
金属镀层.金及金合金电镀层的试验方法.第3部分:孔隙率的阳极电解试验 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:1985); German version EN ISO 4524-3:1995 |
| DIN EN ISO 4524-6-1995 |
金属镀层.电镀金和金合金镀层的测试方法.第6部分:残留盐类的测定 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988); German version EN ISO 4524-6:1994 |
| DIN EN ISO 4526-2004 |
金属涂层.工程用镍电镀层 |
|
| DIN EN ISO 4535-1999 |
釉瓷和搪瓷.抗洗涤纺织品用热洗涤剂溶液性能测定用仪器 |
Vitreous and porcelain enamels - Apparatus for determination of resistance to hot detergent solutions used for washing textiles (ISO 4535:1983); German version EN ISO 4535:1998 |
| DIN EN ISO 4536-1995 |
金属基质上的金属和无机物涂层.盐液滴腐蚀试验(SD试验) |
Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test) (ISO 4536:1985); German version EN ISO 4536:1995 |
| DIN EN ISO 4538-1995 |
金属镀层.硫代乙酰胺腐蚀试验(TAA试验) |
Metallic coatings - Thioacetamide corrosion test (TAA test) (ISO 4538:1978); German version EN ISO 4538:1995 |
| DIN EN ISO 4541-1995 |
金属和其它无机物涂层.涂膏密室耐腐蚀试验(CORR试验) |
Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978); German version EN ISO 4541:1994 |
| DIN EN ISO 4543-1995 |
金属镀层和其它无机物涂层.适用于储存情况的腐蚀试验一般规则 |
Metallic and other non-organic coatings - General rules for storage conditions (ISO 4543:1981); German version EN ISO 4543:1994 |
| DIN EN ISO 4566-1995 |
舱内安装发动机的小型船舶.锥度为1:10螺旋浆轴端和尾轴毂 |
Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper (ISO 4566:1992); German version EN ISO 4566:1995 |
| DIN EN ISO 4577-1999 |
塑料.聚丙烯和丙烯共聚物.空气中氧化热稳定性的测定.烘箱法 |
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air, oven method (ISO 4577:1983); German version EN ISO 4577:1999 |
| DIN EN ISO 4583-1998 |
塑料.环氧树脂和有关材料.易皂化氯的测定 |
Plastics - Epoxy resins and related materials - Determination of easily saponifiable chlorine (ISO 4583:1998); German version EN ISO 4583:1998 |
| DIN EN ISO 4589-1-1999 |
塑料.通过氧指数测定其燃烧性.第1部分:导论 |
Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance (ISO 4589-1:1996); German version EN ISO 4589-1:1999 |
| DIN EN ISO 4589-2-1999 |
塑料.通过氧指数测定其燃烧性.第2部分:环境温度试验 |
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996); German version EN ISO 4589-2:1999 |
| DIN EN ISO 4590-2003 |
硬质泡沫塑料.开孔和闭孔容积百分数测定 |
(Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002); German version EN ISO 4590:2003) |
| DIN EN ISO 4597-1-1998 |
塑料.环氧树脂的硬化剂和促进剂.第1部分:名称与牌号 |
Plastics - Hardeners and accelerators for epoxide resins - Part 1: Designation (ISO 4597-1:1983); German version EN ISO 4597-1:1997 |
| DIN EN ISO 4599-1997 |
塑料.耐环境应力龟裂的测定.弯形条块法 |
Plastics - Determination of resistance to environmental stress cracking (ESC) - Bent strip method (ISO 4599:1986); German version EN ISO 4599:1996 |
| DIN EN ISO 4608-1998 |
塑料.一般用途的氯乙烯均聚物和共聚物树脂.室温下增塑剂吸收的测定 |
Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998); German version EN ISO 4608:1998 |
| DIN EN ISO 4610-2002 |
塑料.氯乙烯均聚物和共聚物树脂.使用气喷式筛滤器械的筛析 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001); German version EN ISO 4610:2001 |
| DIN EN ISO 4611-2000 |
塑料.湿热,水溅和盐雾效果的测定 |
Plastics - Determination of effects of exposure to damp heat, water spray and salt mist (ISO 4611:1987); German version EN ISO 4611:1999 |
| DIN EN ISO 4612-1999 |
塑料.测试用途的聚氯乙烯(PVC)膏料制备.行星式混合器方法 |
Plastics - Preparation of PVC pastes for testing purposes - Planetary-mixer method (ISO 4612:1999); German version EN ISO 4612:1999 |
| DIN EN ISO 4613-1-1999 |
塑料.醋酸乙烯/乙烯酯(E/VAC)模塑材料.第1部分:名称与符号及规范. |
Plastics - Ethylen/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993); German version EN ISO 4613-1:1999 |
| DIN EN ISO 4613-2-1995 |
塑料.醋酸乙烯/乙烯酯(E/VAC)模塑材料.第2部分:试样制造和性能测定 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995); German version EN ISO 4613-2:1995 |
| DIN EN ISO 4613-2-2004 |
塑料.乙酸乙烯/乙烯酯(E/VAC)模塑和挤塑材料.第2部分:试验样品的制备和性能测定 |
|
| DIN EN ISO 4614-2000 |
塑料.三聚氰胺--甲醛压模.可萃取的甲醛的测定 |
Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde (ISO 4614:1977); German version EN ISO 4614:1999 |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com