标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 11145-2002 |
光学和光学仪器.激光和有关的激光设备.词汇和符号 |
(Optics and optical instruments - Laser and laser-related equipment - Vocabulary and symbols (ISO 11145:2001); German version EN ISO 11145:2001) |
| DIN EN ISO 11146-1999 |
激光和激光相关设备.激光束参数的试验方法.射线测量,离向角和射线传播系数 |
(Lasers and laser related equipment - Test methods for laser beam parameters - Beam widths, divergence angle and beam propagation factor (ISO 11146:1999); German version EN ISO 11146:1999) |
| DIN EN ISO 11146-2-2005 |
激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第2部分:一般象散束 |
|
| DIN EN ISO 11146-2-2005 |
激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第2部分:一般象散束 |
|
| DIN EN ISO 11149-1997 |
光学和光学仪器.激光和激光相关设备.非电信激光应用的光纤接头 |
(Optics and optical instruments - Lasers and laser-related equipment - Fibre optic connectors for non-telecommunication laser application (ISO 11149:1997); German version EN ISO 11149:1997) |
| DIN EN ISO 11151-1-2000 |
激光和激光相关设备.标准光学件.第1部分:紫外线、可见光和近红外线光谱范围内件 |
(Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000) |
| DIN EN ISO 11151-2-2000 |
激光和激光相关设备.标准光学件.第2部分:红外线光谱范围内件 |
(Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); German version EN ISO 11151-2:2000) |
| DIN EN ISO 1119-2003 |
产品几何量技术规范(GPS).锥度和锥度角系列 |
(Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:1998); German version EN ISO 1119:2002) |
| DIN EN ISO 11196-1997 |
麻醉气体用监测器 |
(Aneasthetic gas monitors (ISO 11196:1995 including Technical Corrigendum 1:1997); German version EN ISO 11196:1997) |
| DIN EN ISO 11197-2005 |
医疗供电设备 |
|
| DIN EN ISO 11199-1-2000 |
双臂操作的助步器.要求和试验方法.第1部分:步行支架 |
(Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:1999); German version EN ISO 11199-1:1999) |
| DIN EN ISO 11199-2-2000 |
双臂操作的助步器.要求和试验方法.第2部分:滚动器 |
(Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:1999); German version EN ISO 11199-2:1999) |
| DIN EN ISO 11199-2-2005 |
双臂操作的助步器.要求和试验方法.第2部分:滚动器 |
|
| DIN EN ISO 1120-2002 |
传送带.机械紧固件强度测定.静态试验方法 |
(Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2002); German version EN ISO 1120:2002) |
| DIN EN ISO 11200-1996 |
声学.机械和设备发出的噪声.在工作站和其他特定位置发射声压级测定基本标准导则 |
(Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995); German version EN ISO 11200:1995 |
| DIN EN ISO 11201-1996 |
声学.机械装置及设备发出的噪声.工作地点和其它试验场所辐射声压级的测量.反射平面上基本自由声区用2级精度 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions; engineering method in an essentially free field over a reflecting plane (ISO 11201:1995); German vers |
| DIN EN ISO 11202-1996 |
声学.机械装置及设备发出的噪声.工作地点和其它试验场所辐射声压级的测量.在使用条件下测量的3级精度方法 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions; survey method in situ (ISO 11202:1995); German version EN ISO 11202:1995) |
| DIN EN ISO 11203-1996 |
声学.机械装置及设备发出的噪声.工作地点和其它声功率级试验场所的辐射声压级测量 |
(Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995); German version EN ISO 11203:1995) |
| DIN EN ISO 11204-1996 |
声学.机械装置及设备发出的噪声.工作地点和其它试验场所的辐射声压级测量.环境改善法 |
(Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions; method requiring environmental corrections (ISO 11204:1995); German version EN ISO 11204:1995) |
| DIN EN ISO 11205-2004 |
声学.机械和设备发出的噪音.使用声强现场测定工作位和其它特殊位置的声压级别的工程方法 |
|
| DIN EN ISO 11210-1995 |
铂装饰合金中铂量测定.用六氯铂酸二铵沉淀作重力测定 |
(Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate (ISO 11210:1995); German version EN ISO 11210:1995) |
| DIN EN ISO 11212-1-1997 |
淀粉和淀粉制品.重金属含量.第1部分:用原子吸收光谱法测定砷含量 |
(Starch and derived products - Heavy metals content - Part 1: Determination of arsenic content by atomic absorption spectrometry (ISO 11212-1:1997); German version EN ISO 11212-1:1997) |
| DIN EN ISO 11212-2-1997 |
淀粉和淀粉制品.重金属含量.第2部分:用原子吸收光谱法测定汞含量 |
(Starch and derived products - Heavy metals content - Part 2: Determination of mercury content by atomic absorption spectrometry (ISO 11212-2:1997); German version EN ISO 11212-2:1997) |
| DIN EN ISO 11212-3-1997 |
淀粉和淀粉制品.重金属含量.第3部分:用带电热原子分裂的原子吸收光谱法测定铅含量 |
(Starch and derived products - Heavy metals content - Part 3: Determination of lead content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-3:1997); German version EN ISO 11212-3:1997) |
| DIN EN ISO 11212-4-1997 |
淀粉和淀粉制品.重金属含量.第4部分:用带电热原子分裂的原子吸收光谱法测定镉含量 |
(Starch and derived products - Heavy metals content - Part 4: Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization (ISO 11212-4:1997); German version EN ISO 11212-4:1997) |
| DIN EN ISO 11213-1995 |
淀粉和淀粉制品的检验.用酶催化法测定淀粉的乙酰基的含量 |
(Modified starch - Determination of acetyl content - Enzymatic method (IS0 11213:1995); German version EN ISO 11213:1995) |
| DIN EN ISO 11214-1996 |
改进的淀粉.氧化淀粉中羟基团含量的测定 |
(Modified starch - Determination of carboxyl group content of oxidized starch (ISO 11214:1996); German version EN ISO 11214:1996) |
| DIN EN ISO 11215-1998 |
改良淀粉.乙酰二淀粉己二酸酯中己二酸含量的测定.气相色谱法 |
(Modified starch - Determination of adipic acid content of acetylated di-starch adipates - Gas-chromatographic method (ISO 11215:1998); German version EN ISO 11215:1998) |
| DIN EN ISO 11216-1998 |
改良淀粉.羧甲基淀粉中羧甲基团含量的测定 |
(Modified starch - Determination of content of carboxymethyl groups in carboxymethyl starch (ISO 11216:1998); German version EN ISO 11216:1998) |
| DIN EN ISO 11244-1999 |
牙科用钎焊包埋料 |
(Dental brazing investments (ISO 11244:1998); German version EN ISO 11244:1999) |
| DIN EN ISO 11245-2000 |
牙齿修复.磷酸盐粘结耐火模铸材料 |
(Dental restorations - Phosphate-bonded refractory die materials (ISO 11245:1999); German version EN ISO 11245:2000) |
| DIN EN ISO 11246-1999 |
牙科硅酸乙脂粘接铸造包埋料 |
(Dental ethyl silicate bonded casting investments (ISO 11246:1996); German version EN ISO 11246:1998) |
| DIN EN ISO 11248-1999 |
塑料.热塑材料.高温下短期特性的评定 |
(Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993); German version EN ISO 11248:1999) |
| DIN EN ISO 11254-1-2000 |
激光和激光相关设备.光学表面激光诱导损伤阈的测定.第1部分:1-on-1试验 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test (ISO 11254-1:2000); German version EN ISO 11254-1:2000) |
| DIN EN ISO 11254-2-2002 |
激光和激光相关设备.光学表面激光诱导损伤阈的测定.第2部分:S-on-1试验 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001); German version EN ISO 11254-2:2001) |
| DIN EN ISO 1127-1997 |
不锈钢管.尺寸,公差和单位长度的质量 |
(Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992); German version EN ISO 1127:1996) |
| DIN EN ISO 11290-1-1997 |
食品和动物饲料的微生物学.单核细胞增多性李司忒氏菌验证和计数用水平法.第1部分:验证方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 1: Detection method (ISO 11290-1:1996); German version EN ISO 11290-1:1996) |
| DIN EN ISO 11290-1-2005 |
食品和动物饲料的微生物学.单核细胞增生性利斯特氏菌检测和计数的水平方法.第1部分:检测方法 |
|
| DIN EN ISO 11290-2-1998 |
食品和动物饲料的微生物学.单核细胞增多性李司忒氏菌验证和计数用水平法.第2部分:验证方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 2: Enumeration method (ISO 11290-2:1998); German version EN ISO 11290-2:1998) |
| DIN EN ISO 11290-2-2005 |
食品和动物饲料的微生物学.单核细胞增生性利斯特氏菌检测和计数的水平方法.第2部分:计数方法 |
|
| DIN EN ISO 11306-1998 |
金属和合金的腐蚀.海水表面的金属和合金的暴露和估算的指南 |
(Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water (ISO 11306:1998); German version EN ISO 11306:1998) |
| DIN EN ISO 1133-2000 |
塑料.热塑性塑料的质量流率(MFR)和熔体流量率(MVR)的测定 |
(Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:1997); German version EN ISO 1133:1999) |
| DIN EN ISO 1133-2005 |
塑料.热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 |
|
| DIN EN ISO 11334-1-1997 |
用胳膊操作的助步器.要求和试验方法.第1部分:肘支撑器 |
(Walking aids manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches (ISO 11334-1:1994); German version EN ISO 11334-1:1997) |
| DIN EN ISO 11334-4-1999 |
用一只胳膊操作的助步器.要求和试验方法.第4部分:具有三条或多于三条腿支撑的扶杖 |
(Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs; German version EN ISO 11334-4:1999) |
| DIN EN ISO 11337-2004 |
塑料.聚酰胺.气相色谱法测定ε-己内酰胺和ω-月桂酰 |
|
| DIN EN ISO 11341-1998 |
色漆和清漆.人工风蚀和人工辐射.由于滤化过的氙弧辐射产生的应力 |
(Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:1994); German version EN ISO 11341:1997) |
| DIN EN ISO 11341-2004 |
色漆和清漆.模拟气候及模拟辐射曝晒.氙弧灯曝晒 |
|
| DIN EN ISO 11348-1-1999 |
水质.有关光发射水样品的抑制效果的测定(发光细菌试验).第1部分:使用新制备细菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria (ISO 11348-1:1998); German version EN ISO 11348-1:1998) |
| DIN EN ISO 11348-2-1999 |
水质.有关光发射水样品的抑制效果的测定(发光细菌试验).第2部分:使用液体干细菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria (ISO 11348-2:1998); German version EN ISO 11348-2:1998) |
| DIN EN ISO 11348-3-1999 |
水质.有关光发射水样品的抑制效果的测定(发光细菌试验).第2部分:使用冻干细菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria (ISO 11348-3:1998); German version EN ISO 11348-3:1998) |
| DIN EN ISO 11357-1-1997 |
塑料.差示扫描量热法.第1部分.通用规则 |
(Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:1997); German version EN ISO 11357-1:1997) |
| DIN EN ISO 11358-1997 |
塑料.聚合物的热重测定.一般规则 |
(Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997); German version EN ISO 11358:1997) |
| DIN EN ISO 11369-1997 |
水质.挑选出的植物处理剂的测定.固液提取后用UV探测的高分辨率液相色谱方法 |
(Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997); German version EN ISO 11369:1997) |
| DIN EN ISO 11376-2002 |
塑料.环氧树脂和环氧丙基酯.无机氯的测定 |
(Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine (ISO 11376:1997); German version EN ISO 11376:2001) |
| DIN EN ISO 11378-2-2003 |
铺地织物.实验室污物试验.第2部分:转鼓试验 |
(Textile floor coverings - Laboratory soiling tests - Part 2: Drum test (ISO 11378-2:2001); German version EN ISO 11378-2:2001) |
| DIN EN ISO 11380-1996 |
光学和光学仪器.眼科.镜片样板 |
(Optics and optical instruments - Ophthalmic optics - Formers (ISO 11380:1994); German version EN ISO 11380:1996) |
| DIN EN ISO 11381-1996 |
光学和光学仪器.眼科光学.螺纹 |
(Optics and optical instruments - Ophthalmic optics - Screw threads (ISO 11381:1994); German version EN ISO 11381:1996) |
| DIN EN ISO 11399-2001 |
热环境的人类工效学.相关国际标准的原理和应用 |
(Ergonomics of the thermal environment - Principles and application of relevant international standards (ISO 11399:1995); German version EN ISO 11399:2000) |
| DIN EN ISO 11401-1998 |
塑料.酚醛树脂.用液体色层分离法分离 |
(Plastics - Phenolic resins - Separation by liquid chromatography (ISO 11401:1993); German version EN ISO 11401:1998) |
| DIN EN ISO 11402-1998 |
塑料.缩聚树脂.游离甲醛的测定 |
(Plastics - Condensation resins - Determination of free formaldehyde (ISO 11402:1993); German version EN ISO 11402:1998) |
| DIN EN ISO 11402-2005 |
酚醛树脂、氨基树脂和缩合树脂.游离甲醛含量的测定 |
|
| DIN EN ISO 11403-1-2000 |
塑料.可比较多点数据的获得和表示.第1部分:机械性能 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:1994); German version EN ISO 11403-1:1999) |
| DIN EN ISO 11403-2-2000 |
塑料.可比较多点数据的获得和表示.第2部分:热和加工性能 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:1995); German version EN ISO 11403-2:1999) |
| DIN EN ISO 11403-2-2004 |
塑料.可比多点数据的采集和表示.第2部分:热性能和加工性能 |
|
| DIN EN ISO 11403-3-2002 |
塑料.可比较多点数据的采集和表示.第3部分:环境对特性的影响 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:1999); German version EN ISO 11403-3:2001) |
| DIN EN ISO 11409-1998 |
塑料.酚醛树脂.用差别扫描量热法测定反应热和反应温度 |
(Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998) |
| DIN EN ISO 11426-1999 |
金和金珠宝合金的测定.火吹法(火试验法) |
(Determination of gold in gold jewellery alloys - Cupellation method (fire assay) (ISO 11426:1997); German version EN ISO 11426:1998) |
| DIN EN ISO 11431-2003 |
房屋建筑.连接件.受热、水和透过玻璃的人造光照射后密封胶的粘合性的测定 |
(Building construction - Jointing products - Determination of adhesion/cohesion properties of saelants after exposure to heat, water and artificial light through glass (ISO 11431:2002); German version EN ISO 11431:2002) |
| DIN EN ISO 11432-1998 |
建筑结构.密封剂.抗压特性测定 |
(Building construction - Sealants - Determination of resistance to compression (ISO 11432:1993); German version EN ISO 11432:1997) |
| DIN EN ISO 11432-2005 |
房屋建筑.密封胶.耐压性测定 |
|
| DIN EN ISO 11439-2001 |
气瓶.用作机动车燃料的天然气的车上存储用高压气瓶 |
(Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2000); German version EN ISO 11439:2000) |
| DIN EN ISO 11446-2004 |
道路车辆.牵引车和挂车间电气连接用连接器.具有12V标称电源电压的车辆用13极连接器 |
|
| DIN EN ISO 11468-1999 |
塑料.检验用聚氯乙烯(PVC)糊剂的制备.溶液器法 |
(Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997); German version EN ISO 11468:1999) |
| DIN EN ISO 11469-2000 |
塑料.塑料产品的通用识别和标记 |
(Plastics - Generic identification and marking of plastics products (ISO 11469:2000); German version EN ISO 11469:2000) |
| DIN EN ISO 11489-1995 |
铂装饰合金中铂含量测定.用汞氯化学还原进行重力测定 |
(Determination of platinum in platinum jewellery alloys - Gravimetric method after reduction with mercury(I) chloride (ISO 11489:1995); German version EN ISO 11489:1995) |
| DIN EN ISO 11490-1995 |
钯装饰合金中钯含量测定.用二甲基乙二肟进行重力测定 |
(Determination of palladium in palladium jewellery alloys - Gravimetric method with dimethyl glyoxime (ISO 11490:1995); German version EN ISO 11490:1995) |
| DIN EN ISO 11498-1999 |
牙科手持器械.牙科用低压电动机 |
(Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997); German version EN ISO 11498:1999) |
| DIN EN ISO 11499-1999 |
局部麻醉牙管壳 |
(Dental cartridges for local anaesthetics (ISO 11499:1997); German version EN ISO 11499:1999) |
| DIN EN ISO 11501-2004 |
塑料.薄膜和薄板.加热尺寸变化的测定 |
|
| DIN EN ISO 11502-2005 |
塑料.薄膜和薄板.阻尼力测定 |
|
| DIN EN ISO 11507-2002 |
涂料和清漆.涂层的人工风蚀.暴露于UV荧光和水 |
(Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV and water (ISO 11507:1997); German version EN ISO 11507:2001) |
| DIN EN ISO 11539-1999 |
眼科光学.接触镜片.接触镜片与接触镜片材料分类 |
(Ophthalmic optics - Contact lenses - Classification of contact lenses and contact lens materials (ISO 11539:1999); German version EN ISO 11539:1999) |
| DIN EN ISO 11541-2003 |
天然气.高压下含水量的测定 |
(Natural gas - Determination of water content at high pressure (ISO 11541:1997); German version EN ISO 11541:2002) |
| DIN EN ISO 11542-1-2002 |
塑料.超高分子量聚乙烯模塑和挤塑材料.第1部分:名称与符号系统和基本规范 |
(Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001); German version EN ISO 11542-1:2001) |
| DIN EN ISO 11542-2-1999 |
塑料.超高分子量聚乙烯模塑和挤制材料.第2部分:试样制备和性能测定 |
(Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998); German version EN ISO 11542-2:1998) |
| DIN EN ISO 11543-2002 |
改良淀粉.羟丙含量测定.质子核磁共振(NMR)分光计 |
(Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry (ISO 11543:2000); German version EN ISO 11543:2002) |
| DIN EN ISO 11545-2001 |
农业灌溉设备.有喷头或喷雾咀的横向移动排灌机械和中心轴.水分配均匀性的测定 |
(Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution (ISO 11545:2001); German version EN ISO 11545:2001) |
| DIN EN ISO 11546-1-1996 |
声学.密封罩隔声性能的测定.第1部分:申报用实验室条件下的测量 |
(Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995); German version EN ISO 11546-1:1995) |
| DIN EN ISO 11546-2-1996 |
声学.密封罩隔声性能的测定.第2部分:验收和校验部位的测量 |
(Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995); German version EN ISO 11546-2:1995) |
| DIN EN ISO 11547 Berichtigung 1-2001 |
DINENISO11547-1995的勘误 |
(Corrigendum to DIN EN ISO 11547:1995 (German version EN ISO 11547/A1:2000)) |
| DIN EN ISO 11547-1995 |
小船.负载下起动前的保护 |
(Small craft - Start-in-gear protection (ISO 11547:1994); German version EN ISO 11547:1995) |
| DIN EN ISO 11551-1997 |
光学和光学仪器.激光和与激光相关的设备.光学激光组件光吸收性测试 |
(Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:1997); German version EN ISO 11551:1997) |
| DIN EN ISO 11551-2004 |
光学和光学仪器.激光和激光设备.光学激光组件光吸收性试验方法 |
|
| DIN EN ISO 11553-1-2005 |
机械安全.激光加工机械.第1部分:一般安全要求 |
|
| DIN EN ISO 11553-1-2005 |
机械安全.激光加工机械.第1部分:一般安全要求 |
|
| DIN EN ISO 11554-1999 |
光学和光学仪器.激光器及其相关设备.激光束功率,能量和时间特性参数的检验方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:1998); German version EN ISO 11554:1998) |
| DIN EN ISO 11562-1998 |
几何产品规范.表面纹理:轮廓法.相位校正过滤器的计量学特性 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters (ISO 11562:1996); German version EN ISO 11562:1997) |
| DIN EN ISO 1157-1999 |
塑料.稀释溶液中的醋酸纤维素.粘度值和粘度比的测定 |
(Plastics - Cellulose acetate in dilute solution - Determination of viscosity number and viscosity ratio (ISO 1157:1990); German version EN ISO 1157:1999) |
| DIN EN ISO 1158-1998 |
塑料.氯乙烯均聚物和异分子共聚物.氯含量测定 |
(Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998); German version EN ISO 1158:1998) |
| DIN EN ISO 11591-2001 |
发动机驱动的小型船舶.驾驶位置的视野 |
(Small craft, engine-driven - Field of vision from helm position (ISO 11591:2000); German version EN ISO 11591:2000) |
| DIN EN ISO 11592-2002 |
小于8米长外壳的小艇.最大推动力的额定值测定 |
(Small craft less than 8 m length of hull - Determination of maximum propulsion power rating (ISO 11592:2001); German version EN ISO 11592:2001) |
| DIN EN ISO 11593-1998 |
工业操作机器人.自动终端操纵交换系统.特性的术语和描述 |
(Manipulating industrial robots - Automatic end effector exchange systems - Vocabulary and presentation of characteristics (ISO 11593:1996); German version EN ISO 11593:1997) |
| DIN EN ISO 11600-2004 |
房屋建筑.连接件.密封件的分类和要求 |
|
| DIN EN ISO 11606-2002 |
船舶和航海技术.航海用电磁罗盘 |
(Ships and marine technology - Marine electromagnetic compasses (ISO 11606:2000); German version EN ISO 11606:2001) |
| DIN EN ISO 11608-1-2001 |
医用笔式注射器.第1部分:笔式注射器.要求和试验方法 |
(Pen-injectors for medical use - Part 1: Pen-injectors; Requirements and test methods (ISO 11608-1:2000); German version EN ISO 11608-1:2000) |
| DIN EN ISO 11608-2-2001 |
医用笔式注射器.第2部分:针.要求和试验方法 |
(Pen-injectors for medical use - Part 2: Needles; Requirements and test methods (ISO 11608-2:2000); German version EN ISO 11608-2:2000) |
| DIN EN ISO 11608-3-2001 |
医用笔式注射器.第3部分:成品容器.要求和试验方法 |
(Pen-injectors for medical use - Part 3: Finished cartridges; Requirements and test methods (ISO 11608-3:2000); German version EN ISO 11608-3:2000) |
| DIN EN ISO 11609-1998 |
牙科学.牙膏.要求,试验方法和标志 |
(Dentistry - Toothpastes - Requirements, test methods and marking (ISO 11609:1995); German version EN ISO 11609:1998) |
| DIN EN ISO 11623-2003 |
可运输储气瓶.复合储气瓶的定期检测和测试 |
(Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders (ISO 11623:2002); German version EN ISO 11623:2002) |
| DIN EN ISO 1163-1-1999 |
塑料.未增塑聚氯乙烯(PVC-U)模塑与注塑材料.第1部分:命名与基本规范 |
(Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995); German version EN ISO 1163-1:1999) |
| DIN EN ISO 1163-2-1999 |
塑料.未增塑聚氯乙烯(PVC-U)模塑与注塑材料.第2部分:试样制备与特性测定 |
(Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995); German version EN ISO 1163-2:1999) |
| DIN EN ISO 11640-1998 |
皮革.色牢度试验.周期性往复磨擦的色牢度 |
(Leather - Test for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:1993); German version EN ISO 11640:1998) |
| DIN EN ISO 11641-2004 |
皮革.色牢度试验.耐汗渍的色牢度 |
(Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:1993); German version EN 11641:2003) |
| DIN EN ISO 11641-2004 |
皮革.色牢度试验.耐汗渍的色牢度 |
|
| DIN EN ISO 11642-1998 |
皮革.色牢度试验.耐水洗的色牢度 |
(Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:1993); Deutsche Fassung EN ISO 11642:1998) |
| DIN EN ISO 11643-1998 |
皮革.色牢度试验.小样品耐干洗液的色牢度 |
(Leather - Tests for colour fastness - Colour fastness of small samples to dry-cleaning solutions (ISO 11643:1993); German version EN ISO 11643:1998) |
| DIN EN ISO 11644-2004 |
皮革.涂层粘着牢度测定方法 |
(Leather - Test for adhesion of finish (ISO 11644:1993); German version EN ISO 11644:2003) |
| DIN EN ISO 11644-2004 |
皮革.涂层粘着牢度测定方法 |
|
| DIN EN ISO 11646-1998 |
皮革.面积的测量 |
(Leather - Measurement of area (ISO 11646:1993); German version EN ISO 11646:1998) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com