标准号 |
中文名称 |
英文名称 |
| DIN EN 326-1-1994 |
木材.取样.切割和监测.第1部分:试样取样和切割以及试验结果说明 |
(Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results; German version EN 326-1:1994) |
| DIN EN 326-2-2000 |
木质板.取样.切割和检验.第2部分:工厂中的质量控制 |
(Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory; German version EN 326-2:2000) |
| DIN EN 326-3-1998 |
木材.取样,切割和监测.第3部分:木板供货的验收检验 |
(Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a consignment of panels; German version EN 326-3:1998) |
| DIN EN 326-3-2004 |
木基板材.取样、切割和检验.第3部分:单批板材的检验 |
|
| DIN EN 3264-2002 |
航空和航天系列.钛合金管连接件8度30分.推力金属丝螺母 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Thrust wire nuts; German version EN 3264:2001) |
| DIN EN 3266-2002 |
航空和航天系列.钛合金管连接件.闷头螺母 |
(Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut; German version EN 3266:2001) |
| DIN EN 3267-2002 |
航空和航天系列.钛合金闷头垫圈 |
(Aerospace series - Washers, bulkhead, in titanium alloy; German version EN 3267:2001) |
| DIN EN 3268-2002 |
航空和航天系列.钛合金管联接件8度30分.压力插头 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Pressure plug; German version EN 3268:2001) |
| DIN EN 327-2003 |
热交换器.强制对流空气冷却制冷剂凝结器.性能确定的试验程序 |
(Heat exchangers - Forced convection air cooled refrigerant condensors - Test procedure for establishing performance (includes amendment A1:2002); German version EN 327:2000 + A1:2002) |
| DIN EN 3270-2004 |
航空航天系列.8°30钛合金管连接件.带锁紧环的堵塞 |
|
| DIN EN 3274-2002 |
航空和航天系列.钛合金管联接件8度30分.螺纹.几何配置 |
(Aerospace series - Pipe coupling 8?0 - Threaded; Geometric configuration; German version EN 3274:2001) |
| DIN EN 3275-2002 |
航空航天系列.管连接80`高达28000kPa.移动光束密封.米制系列.技术规范 |
(Aerospace series - Pipe coupling 8?0 up to 28000 kPa - Dynamic beam seal; Metric series; Technical specification; German and English version EN 3275:2002) |
| DIN EN 328-2003 |
热交换器.冷冻用强制对流空气冷却器的性能确定的试验程序 |
(Heat exchangers - Test procedure for establishing the performance of forced convection unit air coolers for refrigeration (includes amendment A1:2002); German version EN 328:1999 + A1:2002) |
| DIN EN 3280-1994 |
航空和航天.飞机上用轴承.滚动轴承.向心球轴承或摆动轴承.交货技术条件 |
(Aerospace series; bearings, airframe rolling, rigid or self-aligning; technical specification; German version EN 3280:1994) |
| DIN EN 3281-1994 |
航空和航天.飞机用轴承.钢制单列向心球轴承.直径系列8和9.尺寸和负载 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9; dimensions and loads; German version EN 3281:1994) |
| DIN EN 3282-1994 |
航空和航天.飞机用轴承.镀镉刚制单列向心球轴承.直径系列8和9.尺寸和负载 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9; dimensions and loads; German version EN 3282:1994) |
| DIN EN 3283-1994 |
航空和航天.飞机用轴承.不锈钢单列向心球轴承.直径系列8和9.尺寸和负载 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9; dimensions and loads; German version EN 3283:1994) |
| DIN EN 3284-1994 |
航空和航天.飞机用轴承.钢制单列向心球轴承.直径系列0和2.一般轴承间隙.尺寸和负载 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3284:1994) |
| DIN EN 3285-1994 |
航空和航天.飞机用轴承.镀镉钢制单列向心球轴承.直径系列0和2.一般轴承间隙.尺寸和负载 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3285:1994) |
| DIN EN 3286-1994 |
航空和航天.飞机用轴承.不锈钢制单列向心球轴承.直径系列0和2.尺寸和负载 |
(Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3286:1994) |
| DIN EN 3287-1994 |
航空和航天.飞机用轴承.钢制双列自动调心球轴承.直径系列2.尺寸和负载 |
(Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2; dimensions and load; German version EN 3287:1994) |
| DIN EN 3288-1994 |
航空和航天.飞机用轴承.镀镉钢制双列自动调心球轴承.直径系列2.尺寸和负载 |
(Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2; dimensions and loads; German version EN 3288:1994) |
| DIN EN 3289-1994 |
航空和航天.飞机用轴承.不锈钢制双列自动调心球轴承.直径系列2.尺寸和负载 |
(Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2; dimensions and loads; German version EN 3289:1994) |
| DIN EN 3290-1994 |
航空和航天.飞机用轴承.钢制单列球面轴承.直径系列3和4.尺寸和负载 |
(Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4; dimensions and loads; German version EN 3290:1994) |
| DIN EN 3291-1994 |
航空和航天.飞机用轴承.镀镉钢制单列球面轴承.直径系列3和4.尺寸和负载 |
(Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4; dimensions and loads; German version EN 3291:1994) |
| DIN EN 3292-1994 |
航空和航天.飞机用轴承.不锈钢制单列球面轴承.直径系列3和4.尺寸和负载 |
(Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4; dimensions and loads; German version EN 3292:1994) |
| DIN EN 3297-1998 |
航空和航天.薄壁,自锁,耐高温镍基合金NI-P100HT(因康718)制用MJ螺纹的螺纹接头.交货技术条件 |
(Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification; German version EN 3297:1998) |
| DIN EN 3298-1998 |
航空和航天.薄壁,自锁螺纹接头.装卸方法 |
(Aerospace series - Inserts, thin wall, self-locking - Installation and removal procedure; German version EN 3298:1998) |
| DIN EN 33-2003 |
带密耦冲洗水箱的座便器.连接尺寸 |
(Pedestal W.C. pans with close coupled flushing cistern - Connecting dimensions; German version EN 33:2003) |
| DIN EN 330-1993 |
木材防腐剂.测定不接触地面和涂层情况下使用的木材防腐剂的相对作用的野外试验 |
(Wood preservatives; field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed out of ground contact: L-joint method; German version EN 330:1993) |
| DIN EN 3303-1997 |
航空和航天.镀镉合金钢制中等螺纹长度内六角圆柱形螺丝.等级:1100MPa(室温下)/235℃ |
(Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 C; German version EN 3303:1997) |
| DIN EN 3304-1996 |
航空和航天.钛合金制阳极处理MoS锻造短螺纹带翼型十字槽带小头100度沉头配合螺钉.等级:1100MPa(室温下)/315 |
(Aerospace series - Screws, 100 countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS lubricated, classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3304:1996) |
| DIN EN 3305-1996 |
航空和航天.合金钢制镀镉短螺纹带翼型十字槽带小头100度沉头配合螺钉.等级:1100MPa(室温下)/235℃ |
(Aerospace series - Screws, 100 countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 C; German version EN 3305:1996) |
| DIN EN 3306-1996 |
航空和航天.钛合金制阳极化MoS2润滑短螺纹接近顶点带翼形十字槽的100度沉头螺丝.等级:1100MPa/315℃ |
(Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3306:1996) |
| DIN EN 3307-1996 |
航空和航天.钛合金制阳极处理MoS锻造螺纹接近根部带翼型十字槽平头螺钉.等级:1100MPa(室温下)/315℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3307:1996) |
| DIN EN 3308-1996 |
航空和航天.钛合金制阳极化MoS2润滑螺纹接近顶点的六角螺丝.等级:1100MPa/315℃ |
(Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3308:1996) |
| DIN EN 331-1999 |
建筑物燃气设备上的手动球阀和底部相锁紧的锥形塞阀 |
(Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings; German version EN 331:1998) |
| DIN EN 334-2001 |
入口压力100巴以下用气体压力调节器.德文版本EN334:1999+A:2000 |
(Gas pressure regulators for inlet pressures up to 100 bar; German version EN 334:1999 + A1:2000) |
| DIN EN 334-2005 |
入口压力100巴及以下用气体压力调节器 |
|
| DIN EN 334-2005 |
入口压力100巴及以下用气体压力调节器 |
|
| DIN EN 334-2005 |
入口压力100巴及以下用气体压力调节器 |
|
| DIN EN 335-1-1992 |
木材和木材制品的耐久性.细菌侵害危险等级的定义.第1部分:通则 |
(Durability of wood and derived materials; definition of hazard classes of biological attack; part 1: general; german version EN 335-1:1992) |
| DIN EN 335-2-1992 |
木材和木材制品的耐久性.细菌侵害危险等级的定义.第2部分:纯木材制品时的应用 |
(Durability of wood and derived materials; definition of hazard classes of biological attack; part 2: application to solid wood; german version EN 335-2:1992) |
| DIN EN 335-3-1995 |
木材和木材制品的耐久性.细菌侵害危险等级的定义.第3部分:木制板面的应用 |
(Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels; German version EN 335-3:1995) |
| DIN EN 336-2003 |
结构木材.尺寸和允许偏差 |
(Structural timber - Sizes, permitted deviations; German version EN 336:2003) |
| DIN EN 3377-1996 |
航空和航天.耐高温钢FE-PA92HT(A286)制自锁六角螺母.等级:1100MPa(室温下)/425℃ |
(Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 C; German version EN 3377:1996) |
| DIN EN 3379-1996 |
航空和航天.耐高温镍基合金NI-P101HT(沃斯帕落伊合金)制厚螺母用中螺纹,十二角配合螺栓.等级:1210MPa(室温 |
(Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 C; German version EN 3 |
| DIN EN 338-2003 |
结构木材.强度等级 |
(Timber structures - Strength classes; German version EN 338:2003) |
| DIN EN 3380-1996 |
航空和航天.安全环.交货技术条件 |
(Aerospace series - Rings, retaining - Technical specification; German version EN 3380:1996) |
| DIN EN 3381-1996 |
航空和航天.钛制阳极处理MoS锻造短螺纹带翼型十字槽100度沉头配合螺钉.等级:1100MPa(室温下)/315℃ |
(Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 3381:1996) |
| DIN EN 34-1992 |
壁悬式抽水马桶水箱.连接尺寸 |
(Wall hung W.C. pan with close coupled cistern; connecting dimensions; german version EN 34:1992) |
| DIN EN 340-1993 |
防护服.一般要求 |
(Protective clothing; general requirements; German version EN 340:1993) |
| DIN EN 340-2004 |
防护服.一般要求 |
|
| DIN EN 341 Berichtigung 1-1994 |
对DINEN341标准的修正 |
(Corrigendum to DIN EN 341:1993-02; German version EN 341:1992/AC:1993) |
| DIN EN 341-1993 |
防人员坠落保护装置.绳索下滑器 |
(Personal protective equipment against falls from a height; descender devices; german version EN 341:1992) |
| DIN EN 342-2004 |
防护服.防寒外套和防寒套装 |
|
| DIN EN 344-1-1997 |
工商专用安全鞋,防护鞋,职业鞋.第1部分:要求和检验方法(包括更改A:1997) |
(Safety, protective and occupational footwear for professional use - Part 1: Requirements and test methods (includes Amendment A1:1997); German version EN 344:1992 + A1:1997) |
| DIN EN 344-2-1996 |
专用安全、防护和职业用鞋靴.第2部分:附加要求和试验方法 |
(Safety, protective and occupational footwear for professional use - Part 2: Additional requirements and test methods; German version EN 344-2:1996) |
| DIN EN 3446-1995 |
航空和航天.用于仪器仪表不带耐蚀钢法兰的精密球轴承.尺寸和负载 |
(Aerospace series - Bearings, precision ball, without flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads; German version EN 3446:1995) |
| DIN EN 345-1-1997 |
工商业用安全鞋.第1部分:规范(包括更改A1:1997) |
(Safety footwear for professional use - Part 1: Specification (includes Amendment A1:1997); German version EN 345:1992 + A1:1997) |
| DIN EN 345-2-1996 |
专业用安全鞋靴.第2部分:附加规范 |
(Safety footwear for professional use - Part 2: Additional specifications; German version EN 345-2:1996) |
| DIN EN 346-1-1997 |
工商业用防护鞋.第1部分:规范(包括修正更改A1:1997) |
(Protective footwear for professional use - Part 1: Specification (includes Amendment A1:1997); German version EN 346:1992 + A1:1997) |
| DIN EN 346-2-1996 |
专业用防护鞋靴.第2部分:附加规范 |
(Protective footwear for professional use - Part 2: Additional specifications; German version EN 346-2:1996) |
| DIN EN 347-1-1997 |
工商业用职业鞋.第1部分:规范(包括修正更改A1:1997) |
(Occupational footwear for professional use - Part 1: Specification (includes Amendment A1:1997); German version EN 347:1992 + A1:1997) |
| DIN EN 347-2-1996 |
工商业用职业鞋.第2部分:附加规范 |
(Occupational footwear for professional use - Part 2: Additional specifications; German version EN 347-2:1996) |
| DIN EN 3475-100-2002 |
航空航天系列.飞行器用电缆.试验方法.第100部分:总则 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 100: General; German version EN 3475-100:2002) |
| DIN EN 3475-201-2002 |
航空航天系列.飞行器用电缆.试验方法.第201部分:外观检查 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 201: Visual examination; German version EN 3475-201:2002) |
| DIN EN 3475-202-2002 |
航空航天系列.飞行器用电缆.试验方法.第202部分:质量 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 202: Mass; German version EN 3475-202:2002) |
| DIN EN 3475-301-2002 |
航空航天系列.飞行器用电缆.试验方法.第301部分:单位长度电阻 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 301: Electrical resistance per unit length; German version EN 3475-301:2002) |
| DIN EN 3475-302-2002 |
航空航天系列.飞行器用电缆.试验方法.第302部分:电压保护试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 302: Voltage proof test; German version EN 3475-302:2002) |
| DIN EN 3475-303-2002 |
航空航天系列.飞行器用电缆.试验方法.第303部分:绝缘电阻 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance; German version EN 3475-303:2002) |
| DIN EN 3475-304-2002 |
航空航天系列.飞行器用电缆.试验方法.第304部分:表面电阻 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 304: Surface resistance; German version EN 3475-304:2002) |
| DIN EN 3475-305-2002 |
航空航天系列.飞行器用电缆.试验方法.第305部分:过载电阻 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 305: Overload resistance; German version EN 3475-305:2002) |
| DIN EN 3475-401-2002 |
航空航天系列.飞行器用电缆.试验方法.第401部分:加速老化 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 401: Accelerated ageing; German version EN 3475-401:2002) |
| DIN EN 3475-402-2002 |
航空航天系列.飞行器用电缆.试验方法.第402部分:收缩和脱层 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination; German version EN 3475-402:2002) |
| DIN EN 3475-403-2002 |
航空航天系列.飞行器用电缆.试验方法.第403部分:脱层和阻塞 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 403: Delamination and blocking; German version EN 3475-403:2002) |
| DIN EN 3475-404-2002 |
航空航天系列.飞行器用电缆.试验方法.第404部分:热冲击 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 404: Thermal shock; German version EN 3475-404:2002) |
| DIN EN 3475-405-2002 |
航空航天系列.飞行器用电缆.试验方法.第405部分:环境温度下弯曲试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 405: Bending at ambient temperature; German version EN 3475-405:2002) |
| DIN EN 3475-406-2002 |
航空航天系列.飞行器用电缆.试验方法.第406部分:冷弯试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 406: Cold bend test; German version EN 3475-406:2002) |
| DIN EN 3475-407-2002 |
航空航天系列.飞行器用电缆.试验方法.第407部分:易燃性 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 407: Flammability; German version EN 3475-407:2002) |
| DIN EN 3475-409-2002 |
航空航天系列.飞行器用电缆.试验方法.第409部分:真空老化试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing; German version EN 3475-409:2002) |
| DIN EN 3475-410-2002 |
航空航天系列.飞行器用电缆.试验方法.第410部分:耐热试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 410: Thermal endurance; German version EN 3475-410:2002) |
| DIN EN 3475-412-2002 |
航空航天系列.飞行器用电缆.试验方法.第412部分:耐湿试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance; German and English version EN 3475-412:2002) |
| DIN EN 3475-413-2002 |
航空航天系列.飞行器用电缆.试验方法.第413部分:反向缠绕试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test; German and English version EN 3475-413:2002) |
| DIN EN 3475-501-2002 |
航空航天系列.飞行器用电缆.试验方法.第501部分:动态切开试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 501: Dynamic cut-through; German version EN 3475-501:2002) |
| DIN EN 3475-502-2002 |
航空航天系列.飞行器用电缆.试验方法.第502部分:切口延伸试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation; German version EN 3475-502:2002) |
| DIN EN 3475-503-2002 |
航空航天系列.飞行器用电缆.试验方法.第503部分:擦伤磨蚀试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 503: Scrape abrasion; German version EN 3475-503:2002) |
| DIN EN 3475-504-2002 |
航空航天系列.飞行器用电缆.试验方法.第504部分:扭转 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 504: Torsion; German version EN 3475-504:2002) |
| DIN EN 3475-505-2002 |
航空航天系列.飞行器用电缆.试验方法.第505部分:连接件和绞线抗拉试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 505: Tensile test on conductors and strands; German version EN 3475-505:2002) |
| DIN EN 3475-506-2002 |
航空航天系列.飞行器用电缆.试验方法.第506部分:电镀均匀性 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 506: Plating continuits; German version EN 3475-506:2002) |
| DIN EN 3475-507-2002 |
航空航天系列.飞行器用电缆.试验方法.第507部分:镀层粘结性试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 507: Adherence of plating; German version EN 3475-507:2002) |
| DIN EN 3475-508-2002 |
航空航天系列.飞行器用电缆.试验方法.第508部分:镀层厚度 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 508: Plating thickness; German and English version EN 3475-508:2002) |
| DIN EN 3475-509-2002 |
航空航天系列.飞行器用电缆.试验方法.第509部分:可焊度 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability; German and English version EN 3475-509:2002) |
| DIN EN 3475-510-2002 |
航空航天系列.飞行器用电缆.试验方法.第510部分:挤压绝缘护套和包装材料的抗拉强度和延伸度 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material; German and English version EN 3475-510:2002) |
| DIN EN 3475-511-2002 |
航空航天系列.飞行器用电缆.试验方法.第511部分:电缆间的磨损 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion; German and English version EN 3475-511:2002) |
| DIN EN 3475-512-2002 |
航空航天系列.飞行器用电缆.试验方法.第512部分:耐弯曲 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance; German and English version EN 3475-512:2002) |
| DIN EN 3475-603-2002 |
航空航天系列.飞行器用电缆.试验方法.第603部分:耐湿弧径迹 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 603: Resistance to wet arc tracking; German and English version EN 3475-603:2002) |
| DIN EN 3475-604-2002 |
航空航天系列.飞行器用电缆.试验方法.第604部分:耐干弧传导 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 604: Resistance to dry arc propagation; German and English version EN 3475-604:2002) |
| DIN EN 3475-605-2002 |
航空航天系列.飞行器用电缆.试验方法.第605部分:湿短路试验 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 605: Wet short circuit test; German and English version EN 3475-605:2002) |
| DIN EN 3475-701-2002 |
航空航天系列.飞行器用电缆.试验方法.第701部分:导体绝缘的可剥离性和粘结性 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 701: Strippabilitiy and adherence of insulation to the conductor; German version EN 3475-701:2002) |
| DIN EN 3475-702-2002 |
航空航天系列.飞行器用电缆.试验方法.第702部分:屏蔽后推移力 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 702: Screen pushback capability; German version EN 3475-702:2002) |
| DIN EN 3475-703-2002 |
航空航天系列.飞行器用电缆.试验方法.第703部分:制造商标记的耐久性 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 703: Permanence of manufacturer`s marking; German version EN 3475-703:2002) |
| DIN EN 3475-704-2002 |
航空航天系列.飞行器用电缆.试验方法.第704部分:挠性 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 704: Flexibility; German and English version EN 3475-704:2002) |
| DIN EN 3475-705-2002 |
航空航天系列.飞行器用电缆.试验方法.第704部分:对比测量 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 705: Contrast measurement; German and English version EN 3475-705:2002) |
| DIN EN 3475-801-2002 |
航空航天系列.飞行器用电缆.试验方法.第801部分:单位长度的电容量 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length; German and English version EN 3475-801:2002) |
| DIN EN 3475-802-2002 |
航空航天系列.飞行器用电缆.试验方法.第802部分:电容量不平衡性 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 802: Capacitance unbalance; German and English version EN 3475-802:2002) |
| DIN EN 3475-803-2002 |
航空航天系列.飞行器用电缆.试验方法.第803部分:电容量变化 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 803: Capacitance variation; German and English version EN 3475-803:2002) |
| DIN EN 3475-804-2002 |
航空航天系列.飞行器用电缆.试验方法.第804部分:传播速度 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 804: Velocity of propagation; German and English version EN 3475-804:2002) |
| DIN EN 3475-805-2002 |
航空航天系列.飞行器用电缆.试验方法.第805部分:特性阻抗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance; German and English version EN 3475-805:2002) |
| DIN EN 3475-806-2002 |
航空航天系列.飞行器用电缆.试验方法.第806部分:衰减 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 806: Attenuation; German and English version EN 3475-806:2002) |
| DIN EN 3475-807-2002 |
航空航天系列.飞行器用电缆.试验方法.第807部分:传输阻抗 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance; German and English version EN 3475-807:2002) |
| DIN EN 3475-808-2002 |
航空航天系列.飞行器用电缆.试验方法.第808部分:串音 |
(Aerospace series - Cables, electrical, aircraft use; Test methods - Part 808: Cross-talk; German and English version EN 3475-808:2002) |
| DIN EN 348-1992 |
防护服.检验方法.受小飞溅物金属影响材料的性能的测定 |
(Protective clothing; test method; determination of behaviour of materials on impact of small splashes of molten metal; german version EN 348:1992) |
| DIN EN 349-1993 |
机器的安全性.避免人身体部位受到挤压的最小距离 |
(Safety of machinery; minimum gaps to avoid crushing of parts of the human body; German version EN 349:1993) |
| DIN EN 35-2000 |
只从上面供水的立式坐浴盆.连接尺寸 |
(Pedestal bidets over-rim supply only - Connecting dimensions; German version EN 35:2000) |
| DIN EN 350-1-1994 |
木材和木材制品的耐久性.全木自然耐久性.第1部分:木材自然耐久性的检验和分类原则 |
(Durability of wood and wood based products - Natural durability of solid wood - Part 1: Guide to the principles of testing and classification of the natural durability of wood; German version EN 350-1:1994) |
| DIN EN 350-2-1994 |
木材和木材产品耐久性.全木的自然耐久性.第2部分:在欧洲特殊意义下选出的木材种类的自然耐久性和可治疗性说 |
(Durability of wood and wood based products - Natural durability of solid wood - Part 2: Guide to the natural durability and treatability of selected wood species of importance in Europe; German version EN 350-2:1994) |
| DIN EN 3506-2003 |
航空航天系列.钛和钛合金热轧薄板材.厚度6mm～8mm |
(Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm a 100 mm; Dimensions; German and English version EN 3506:2001) |
| DIN EN 351-1-1995 |
木材和木基制品的耐用性.防腐剂处理过的木材.第1部分:防腐剂渗透和滞留的分类 |
(Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention; German version EN 351-1:1995) |
| DIN EN 351-2-1995 |
木材和木基制品的耐用性.防腐剂处理过的木材.第2部分:用防腐剂处理过的木材的分析取样指南 |
(Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood; German version EN 351-2:1995) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com