标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 15902-2005 |
光学和光子学.衍射光学.词汇 |
|
| DIN EN ISO 15902-2005 |
光学和光子学.衍射光学.词汇 |
|
| DIN EN ISO 15908-2003 |
塑料管系统粘合剂.测定粘合剂热稳定性的试验发方法 |
(Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesive (ISO 15908:2002); German version EN ISO 15908:2002) |
| DIN EN ISO 15913-2003 |
水质.固相萃取和衍生作用后用气相色谱法和质谱法测定包括苯达松和羟基苯甲腈在内的选定的苯氧基链烷除莠剂 |
(Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization (ISO 15913:2000); German version EN ISO 15913: |
| DIN EN ISO 15914-2005 |
动物饲料.淀粉总含量的酶催化测定 |
|
| DIN EN ISO 15914-2005 |
动物饲料.淀粉总含量的酶催化测定 |
|
| DIN EN ISO 15914-2005 |
动物饲料.淀粉总含量的酶催化测定 |
|
| DIN EN ISO 15927-1-2004 |
建筑物的湿热性能.气象数据的计算与显示.第1部分:单一气象素的月均值和年均值 |
(Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly and annual means of single meteorological elements (ISO 15927-1:2003); German version EN ISO 15927-1:2003) |
| DIN EN ISO 15927-1-2004 |
建筑物的湿热性能.气象数据的计算与显示.第1部分:单一气象素的月均值和年均值 |
|
| DIN EN ISO 15927-4-2005 |
建筑物的温湿性能.气候数据的计算和表示.第4部分:取暖和制冷年使用能量评定用小时数据 |
|
| DIN EN ISO 1597-1999 |
塑料.未增塑的醋酸纤维素.醋酸含量的测定 |
(Plastics - Unplasticized cellulose acetate - Determination of acetic acid yield (ISO 1597:1994); German version EN ISO 1597:1999) |
| DIN EN ISO 15973-2001 |
带断点牵引心轴和突出头的封口式空心单面压装铆钉.AlA/St |
(Closed end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15973:2000); German version EN ISO 15973:2000) |
| DIN EN ISO 15974-2001 |
带断点牵引心轴和埋头的封口式空心单面压装铆钉.AlA/St |
(Closed end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15974:2000); German version EN ISO 15974:2000) |
| DIN EN ISO 15975-2003 |
封闭型盘头抽芯盲铆钉.AI/AIA |
(Closed end blind rivets with break pull mandrel and protruding head - Al/AlA (ISO 15975:2002); German version EN ISO 15975:2002) |
| DIN EN ISO 15976-2003 |
封闭型盘头抽芯盲铆钉.St/St |
(Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002); German version EN ISO 15976:2002) |
| DIN EN ISO 15977-2003 |
开口型盘头抽芯盲铆钉.AIA/St |
(Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002); German version EN ISO 15977:2002) |
| DIN EN ISO 15978-2003 |
开口型沉头抽芯盲铆钉.AIA/St |
(Open end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15978:2002); German version EN ISO 15978:2002) |
| DIN EN ISO 15979-2003 |
开口型盘头抽芯盲铆钉.St/St |
(Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002); German version EN ISO 15979:2002) |
| DIN EN ISO 1598-1999 |
塑料.醋酸纤维素.不可溶解成份的测定 |
(Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990); German version EN ISO 1598:1999) |
| DIN EN ISO 15980-2003 |
开口型沉头抽芯盲铆钉.St/St |
(Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002); German version EN ISO 15980:2002) |
| DIN EN ISO 15981-2003 |
开口型盘头抽芯盲铆钉.AIA/AIA |
(Open end blind rivets with break pull mandrel and protruding head - AlA/AlA (ISO 15981:2002); German version EN ISO 15981:2002) |
| DIN EN ISO 15982-2003 |
开口型沉头抽芯盲铆钉.AIA/AIA |
(Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA (ISO 15982:2002); German version EN ISO 15982:2002) |
| DIN EN ISO 15983-2003 |
开口型盘头抽芯盲铆钉.A2/A2 |
(Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002); German version EN ISO 15983:2002) |
| DIN EN ISO 15984-2003 |
开口型沉头抽芯盲铆钉.A2/A2 |
(Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002); German version EN ISO 15984:2002) |
| DIN EN ISO 1599-2000 |
塑料.乙酸纤维素.模制时粘度损耗的测定 |
(Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990); German version EN ISO 1599:1999) |
| DIN EN ISO 1600-2000 |
塑料.醋酸纤维素.利用加热的不同时期在模制试样生产中的光吸收量的测定 |
(Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990); German version EN ISO 1600:1999) |
| DIN EN ISO 16017-1-2001 |
室内空气、环境空气和工作场所空气.用吸附管/热解吸/毛细管气相色谱法对挥发性有机化合物进行分析和取样.第 |
(Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000); German version EN ISO 16017-1:2000) |
| DIN EN ISO 16021-2001 |
吸尿辅助器.从使用者和护理者的角度评价一次性使用的成人不能自制的辅助器的基本原则 |
(Urine absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers (ISO 16021:2000); German version EN ISO 16021:2000) |
| DIN EN ISO 16032-2004 |
声学.建筑物服务设备的声压级测量.工程法 |
|
| DIN EN ISO 16032-2004 |
声学.建筑物服务设备的声压级测量.工程法 |
|
| DIN EN ISO 16035-2005 |
动物和植物脂肪和油.食用油中低沸点卤代烃的测定 |
|
| DIN EN ISO 16047-2005 |
紧固件.扭矩/夹持力试验 |
|
| DIN EN ISO 16048-2003 |
耐腐蚀不锈钢紧固件的钝化 |
(Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003) |
| DIN EN ISO 16054-2002 |
外科植入物.外科植入物的最小数据集 |
(Implants for surgery - Minimum data sets for surgical implants (ISO 16054:2000); German version EN ISO 16054:2002) |
| DIN EN ISO 16070-2002 |
石油和天然气工业.井下钻具.闭锁心轴和落地短接管 |
(Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2001); German version EN ISO 16070:2001 (German and English text)) |
| DIN EN ISO 16101-2004 |
包装.危险货物的运输包装.塑料的兼容性试验 |
|
| DIN EN ISO 16103-2005 |
包装.危险物品的运输包装.再循环的塑料 |
|
| DIN EN ISO 16147-2003 |
小艇.艇内柴油发动机.装在发动机上的燃料和电气件 |
(Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002); German version EN ISO 16147:2002) |
| DIN EN ISO 1622-1-1999 |
塑料.聚苯乙烯(PS)模塑与注塑材料.第1部分:命名与基础规范 |
(Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:1994); German version EN ISO 1622-1:1999) |
| DIN EN ISO 1622-2-1999 |
塑料.聚苯乙烯(PS)模塑与挤塑材料.第2部分:试样制备与特性测定 |
(Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995); German version EN ISO 1622-2:1999) |
| DIN EN ISO 1624-2002 |
塑料.氯乙烯均聚物和共聚物树脂.水滤筛析 |
(Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water (ISO 1624:2001); German version EN ISO 1624:2001) |
| DIN EN ISO 16264-2004 |
水质.用流动分析(FIA和CFA)法和光度检测法测定可溶性硅酸盐 |
|
| DIN EN ISO 1628-1-1998 |
塑料.用毛细管粘度计测定稀释溶液中聚合物的粘度.第1部分:一般原理 |
(Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:1998); German version EN ISO 1628-1:1998) |
| DIN EN ISO 1628-2-1999 |
塑料.用毛细管粘度计测定稀释溶液中聚合物的粘度.第2部分:聚氯乙烯树脂 |
(Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscosimeters - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998); German version EN ISO 1628-2:1998) |
| DIN EN ISO 1628-3-1999 |
塑料.粘度值和极限粘度值的测定.第3部分:聚乙烯和聚丙烯 |
(Plastics - Determination of viscosity number and limiting viscosity number - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:1991, including Technical Corrigendum 1:1992); German version EN ISO 1628-3:1999) |
| DIN EN ISO 1628-3-2003 |
塑料.用毛细管粘度计测定稀溶液中聚合物的粘度.第3部分:聚乙烯和聚丙烯 |
(Plastics - Determination of viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2001); German version EN ISO 1628-3:2003) |
| DIN EN ISO 16284-2001 |
眼科光学.眼科光学设备的信息交换 |
(Ophthalmic optics - Information interchange for ophthalmic optical equipment (ISO 16284:2001); German version EN ISO 16284:2001) |
| DIN EN ISO 16330-2004 |
往复运动变容真空泵和泵装置.技术要求 |
|
| DIN EN ISO 16408-2004 |
牙科学.口腔卫生产品.口腔清洗 |
|
| DIN EN ISO 16426-2003 |
紧固件.质量保证体系 |
(Fasteners - Quality assurance system (ISO 16426:2002); German version EN ISO 14426:2002) |
| DIN EN ISO 16484-2-2004 |
建筑物自动化和控制系统.第2部分:硬件 |
|
| DIN EN ISO 16484-3-2005 |
建筑自动化和控制系统(BACS).第3部分:功能 |
|
| DIN EN ISO 16484-5-2004 |
建筑物自动化和控制系统.第5部分:数据通信协议 |
|
| DIN EN ISO 16582-2003 |
开口型盘头抽芯盲铆钉.Cu/St或Cu/Br或Cu/SSt |
(Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002); German version EN ISO 16582:2002) |
| DIN EN ISO 16583-2003 |
开口型沉头抽芯盲铆钉.Cu/St或Cu/Br或Cu/SSt |
(Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002); German version EN ISO 16583:2002) |
| DIN EN ISO 16584-2003 |
开口型盘头抽芯盲铆钉.NiCu/St或NiCu/SSt |
(Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCi/SSt (ISO 16584:2002); German version EN ISO 16584:2002) |
| DIN EN ISO 16585-2003 |
封闭型盘头抽芯盲铆钉.A2/SSt |
(Closed end blind rivets with break pull mandrel and protruding head - A2/SSt (ISO 16585:2002); German version EN ISO 16585:2002) |
| DIN EN ISO 16588-2004 |
水质.六络合反应物的测定.气相色谱法 |
(Water quality - Determination of six complexing agents - Gas-chromatographic method (ISO 16588:2002); German version EN ISO 16588:2003) |
| DIN EN ISO 16588-2004 |
水质.六络合反应物的测定.气相色谱法 |
|
| DIN EN ISO 16654-2001 |
食品和动物饲料的微生物学.大肠杆菌O157检测的水平方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Escherichia coli O157 (ISO 16654:2001); German version EN ISO 16654:2001) |
| DIN EN ISO 1666-1998 |
淀粉.水含量的测定.烘箱干燥法 |
(Starch - Determination of moisture content - Oven-drying method (ISO 1666:1996); German version EN ISO 1666:1997) |
| DIN EN ISO 16663-2-2003 |
捕鱼网.网眼尺寸测定的试验方法.第2部分:网眼长度 |
(Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh (ISO 16663-2:2002); German version EN ISO 16663-2:2003) |
| DIN EN ISO 16671-2004 |
眼科植入物.眼科手术用冲洗液 |
|
| DIN EN ISO 16672-2003 |
外科植入物.眼内填塞 |
(Ophthalmic implants - Ocular endotamponades (ISO 16672:2003); German version EN ISO 16672:2003) |
| DIN EN ISO 16744-2004 |
牙科学.固定的牙齿修复用基本金属材料 |
|
| DIN EN ISO 1675-1998 |
塑料.液态树脂.用比重计法测定浓度 |
(Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985); German version EN ISO 1675:1998) |
| DIN EN ISO 1680-2000 |
声学.测量旋转电机排放的空气噪声的试验规范 |
(Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:1999); German version EN ISO 1680:1999) |
| DIN EN ISO 16812-2005 |
石油和天然气工业.壳管式热交换器 |
|
| DIN EN ISO 16812-2005 |
石油和天然气工业.壳管式热交换器 |
|
| DIN EN ISO 16931-2002 |
动植物脂肪和油.高效尺寸筛析色谱法(HPSEC)测定聚合甘油三酸酯含量 |
(Animal and vegetable fats and oils - Determination of polymerized triglyceride content by high-performance size-exclusion chromatography (HPSEC) (ISO 16931:2001); German version EN ISO 16931:2001) |
| DIN EN ISO 1716-2002 |
建筑产品对火焰试验的反应.燃烧热的测定 |
(Reaction to fire tests for building products - Determination of the heat of combustion (ISO 1716:2002); German version EN ISO 1716:2002) |
| DIN EN ISO 17189-2004 |
黄油、可食用油乳剂和可涂脂肪.脂肪含量的测定(参照法) |
(Butter, edible oil emulsions and spreadable fats - Determination of fat content (Reference method) (ISO 17189:2003); German version EN ISO 17189:2003) |
| DIN EN ISO 17189-2004 |
黄油、可食用油乳剂和可涂脂肪.脂肪含量的测定(参照法) |
|
| DIN EN ISO 172-1998 |
塑料.酚醛塑料模制件.游离氨的检测 |
(Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978); German version EN ISO 172:1998) |
| DIN EN ISO 17201-1-2005 |
声学.射程内噪声.第1部分:枪口炸震的测定 |
|
| DIN EN ISO 17249-2004 |
防止链锯切割的安全鞋靴 |
|
| DIN EN ISO 17292-2004 |
石油、石油化学和相关工业用金属球阀 |
|
| DIN EN ISO 17294-2-2005 |
水质.感应耦合等离子体质谱法(ICP-MS)的应用.第2部分:62种素的测定 |
|
| DIN EN ISO 1735-2005 |
乳酪及融化干酪制品.脂肪含量测定.重量分析法(参照法) |
|
| DIN EN ISO 1735-2005 |
乳酪及融化干酪制品.脂肪含量测定.重量分析法(参照法) |
|
| DIN EN ISO 17353-2005 |
水质.选定的有机化合物的测定.气体色谱法 |
|
| DIN EN ISO 1736-2000 |
奶粉和奶粉制品.脂肪含量的测定.重量分析法(参照法) |
(Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method) (ISO 1736:2000); German version EN ISO 1736:2000) |
| DIN EN ISO 1737-2000 |
淡炼乳和甜炼乳.脂肪含量的测定.重量法(参照法) |
(Evaporated milk and sweetened condensed milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1737:1999); German version EN ISO 1737:1999) |
| DIN EN ISO 1741-1994 |
葡萄糖.干燥后质量损失的测定.真空烘箱法 |
(Dextrose - Determination of loss in mass on drying - Vacuum oven method (ISO 1741:1980); German version EN ISO 1741:1994) |
| DIN EN ISO 1746-2000 |
橡胶或塑料软管和管道.弯曲试验 |
(Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); German version EN ISO 1746:2000) |
| DIN EN ISO 17495-2003 |
水质.选定的硝基本酚的测定.固相萃取法和带有质量光谱探测的气相色谱法 |
(Water quality - Determination of selected nitrophenols - Method by solid phase extraction and gas chromatography with mass spectrometric detection (ISO 17495:2001); German version EN ISO 17495:2003) |
| DIN EN ISO 175-2000 |
塑料.浸入液体化学药品的影响测定的试验方法 |
(Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999); German version EN ISO 175:2000) |
| DIN EN ISO 17510-1-2002 |
睡眠窒息呼吸治疗.第1部分:睡眠窒息呼吸治疗设备 |
(Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy devices (ISO 17510-1:2002); German version EN ISO 17510-1:2002) |
| DIN EN ISO 17510-2-2003 |
睡眠窒息呼吸治疗.第2部分:面具和使用附件 |
(Sleep apnoea breathing therapy - Part 2: Masks and application accessories (ISO 17510-2:2003); German version EN ISO 17510-2:2003) |
| DIN EN ISO 176-1999 |
塑料.增塑剂损耗的测定.活性碳法 |
Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:1976); German version EN ISO 176:1999 |
| DIN EN ISO 176-2005 |
塑料.增塑剂损耗的测定.活性碳法 |
|
| DIN EN ISO 17641-1-2004 |
金属材料焊接的有损检验.焊件的热裂试验.弧焊过程.第1部分:通则 |
|
| DIN EN ISO 17642-1-2004 |
金属材料的焊接的有损试验.焊件的冷裂试验.弧焊过程.第1部分:通则 |
|
| DIN EN ISO 17652-1-2003 |
焊接.与焊接及相关工艺有关的工厂底漆的试验.第1部分:一般要求 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (ISO 17652-1:2003); German version EN ISO 17652-1:2003) |
| DIN EN ISO 17652-2-2003 |
焊接.与焊接及相关工艺有关的工厂底漆的试验.第2部分:工厂底漆的焊接性能 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003); German version EN ISO 17652-2:2003) |
| DIN EN ISO 17652-3-2003 |
焊接.与焊接及相关工艺有关的工厂底漆的试验.第3部分:热切割 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003); German version EN ISO 17652-3:2003) |
| DIN EN ISO 17652-4-2003 |
焊接.与焊接及相关工艺有关的工厂底漆的试验.第4部分:焊接烟尘和气体的排放 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003); German version EN ISO 17652-4:2003) |
| DIN EN ISO 17653-2003 |
金属材料焊缝的破坏检验.电阻点焊的扭转试验 |
Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2003); German version EN ISO 17653:2003 |
| DIN EN ISO 17654-2003 |
金属材料焊缝的破坏检验.电阻焊接.电阻缝焊的压力试验 |
Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003); German version EN ISO 17654:2003 |
| DIN EN ISO 17655-2003 |
金属材料焊缝的破坏检验.δ铁素体测量用样品的准备方法 |
Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement (ISO 17655:2003); German version EN ISO 17655:2003 |
| DIN EN ISO 17664-2004 |
医疗设备的消毒.由生产商提供的可再消毒医疗设备的处理过程的信息 |
|
| DIN EN ISO 17693-2005 |
鞋靴.鞋帮的试验方法.耐磨损性 (ISO 17693-2004); 德文版本 EN ISO 17693-2005 |
|
| DIN EN ISO 17695-2005 |
鞋靴.鞋帮试验方法.变形性(ISO 17695-2004); 德文版本 EN ISO 17695-2005 |
|
| DIN EN ISO 177-1999 |
塑料.增塑剂扩散的测定 |
Plastics - Determination of migration of plasticizers (ISO 177:1988); German version EN ISO 177:1999 |
| DIN EN ISO 17700-2005 |
鞋靴.鞋帮、鞋衬和鞋内衬试验方法.耐摩擦色牢度 |
|
| DIN EN ISO 17707-2005 |
鞋靴.外底试验方法.耐弯性 |
|
| DIN EN ISO 178-1997 |
塑料.弯曲性能测定 |
Plastics - Determination of flexural properties (ISO 178:1993); German version EN ISO 178:1996 |
| DIN EN ISO 178-2003 |
塑料.弯曲性能测定 |
(Plastics - Determination of flexural properties (ISO 178:2001); German version EN ISO 178:2003) |
| DIN EN ISO 17834-2004 |
热喷镀.防高温腐蚀和氧化的涂层 |
(Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003) |
| DIN EN ISO 17834-2004 |
热喷镀.防高温腐蚀和氧化的涂层 |
|
| DIN EN ISO 17836-2005 |
热喷涂.热喷涂熔敷效率的测定 |
|
| DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的挥发性有机化合物含量测定 |
|
| DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的挥发性有机化合物含量测定 |
|
| DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的挥发性有机化合物含量测定 |
|
| DIN EN ISO 179-1-2001 |
塑料.摆式冲击特性测定.第1部分:非仪器冲击试验 |
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000); German version EN ISO 179-1:2000 |
| DIN EN ISO 179-2-2000 |
塑料.摆锤式冲击特性的测定.第2部分:仪器冲击试验 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999 |
| DIN EN ISO 1797-1-1999 |
牙科用旋转器具.柄.第1部分:金属柄 |
Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992 + AMD 1:1997) including Amendment A1:1999; German version EN ISO 1797-1:1995 + A1:1999 |
| DIN EN ISO 1797-2-1995 |
牙科用旋转器具.柄.第2部分:塑料柄 |
Dental rotary instruments - Shanks - Part 2: Shanks made of plastics (ISO 1797-2:1992); German version EN ISO 1797-2:1995 |
| DIN EN ISO 1798-2000 |
柔性泡沫聚合材料.抗拉强度和断裂时延伸率的测定 |
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:1997); German version EN ISO 1798:1999 |
| DIN EN ISO 17993-2004 |
水质.用液-液萃取后的荧光探测高效液相色谱法(HPLC)测定水中的15环芳香烃(PAH) |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com