标准号 |
中文名称 |
英文名称 |
DIN EN ISO 15367-2-2005 |
激光及激光相关设备.激光束波前形状测定用试验方法.第2部分:Shack-Hartmann传感器 |
|
DIN EN ISO 15367-2-2005 |
激光及激光相关设备.激光束波前形状测定用试验方法.第2部分:Shack-Hartmann传感器 |
|
DIN EN ISO 15463-2005 |
石油和天然气工业.新套管、管和平端钻管的现场检验 |
|
DIN EN ISO 15463-2005 |
石油和天然气工业.新套管、管和平端钻管的现场检验 |
|
DIN EN ISO 15465-2004 |
管道工程.带绕金属软管和软管配件 |
|
DIN EN ISO 15480-2000 |
带攻丝螺纹及六角垫圈螺钉头的自攻螺钉 |
(Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999) |
DIN EN ISO 15481-2000 |
带攻丝螺纹的十字凹槽平头自攻螺钉 |
(Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999) |
DIN EN ISO 15482-2000 |
带攻丝螺纹的十字凹槽沉头自攻螺钉 |
(Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); German version EN ISO 15482:1999) |
DIN EN ISO 15483-2000 |
带攻丝螺纹的十字凹槽半沉头自攻螺钉 |
(Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999) |
DIN EN ISO 15487-2002 |
纺织品.评定家庭洗涤和烘干后衣服和其它纺织品外观的方法 |
(Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying (ISO 15487:1999); German version EN ISO 15487:2001) |
DIN EN ISO 15496-2004 |
织物.质量控制用织物的水蒸气渗透率测量 |
|
DIN EN ISO 15512-2004 |
塑料.水含量的测定 |
|
DIN EN ISO 15526-1-2004 |
塑料.聚酮模塑和挤塑材料.第1部分:命名系统和基本规范 |
|
DIN EN ISO 15526-2-2004 |
塑料.聚酮模塑和挤塑材料.第2部分:试验样品的制备和性能测定 |
|
DIN EN ISO 15528-2000 |
涂料和清漆用涂料、清漆和原材料.抽样 |
(Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2000); German version EN ISO 15528:2000) |
DIN EN ISO 15540-2002 |
船舶和航海技术.软管组件的抗燃性.试验方法 |
(Ships and marine technology - Fire resistance of hose assemblies - Test methods (ISO 15540:1999); German version EN ISO 15540:2001) |
DIN EN ISO 15541-2002 |
船舶和航海技术.软管组件的抗燃性.试验板的要求 |
(Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999); German version EN ISO 15541:2001) |
DIN EN ISO 15546-2005 |
石油和天然气工业.铝合金钻杆 |
|
DIN EN ISO 15546-2005 |
石油和天然气工业.铝合金钻杆 |
|
DIN EN ISO 15547-2003 |
石油和天然气工业.板式热交换器 |
(Petroleum and natural gas industries - Plate heat exchangers (ISO 15547:2000); German and English version EN ISO 15547:2001) |
DIN EN ISO 15584-2001 |
小型船舶.船内汽油发动机.发动机燃料和电气件 |
(Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001); German version EN ISO 15584:2001) |
DIN EN ISO 15586-2004 |
水质.用石墨炉原子吸收光谱法测定痕量素 |
(Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003); German version EN ISO 15586:2003) |
DIN EN ISO 15586-2004 |
水质.用石墨炉原子吸收光谱法测定痕量素 |
|
DIN EN ISO 15587-1-2002 |
水质.确定水中所选素的发酵作用.第1部分:水解发酵 |
(Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion (ISO 15587-1:2002); German version EN ISO 15587-1:2002) |
DIN EN ISO 15587-2-2002 |
水质.确定水中所选素的发酵作用.第2部分:硝酸发酵作用 |
(Water quality - Digestion for the determination of elements in water - Part 2: Nitric acid digestion (ISO 15587-2:2002); German version EN ISO 15587-2:2002) |
DIN EN ISO 1559-2001 |
牙科材料.牙用汞齐合金 |
(Dental materials - Alloys for dental amalgam (ISO 1559:1995 + Technical Corrigendum 1:1997); German version EN ISO 1559:2001) |
DIN EN ISO 15605-2004 |
胶粘剂.抽样 |
|
DIN EN ISO 15606-2000 |
牙钻手柄.气动刮器和刮器尖端 |
(Dental handpieces - Air-powered scalers and scaler tips (ISO 15606:1999); German version EN ISO 15606:1999) |
DIN EN ISO 15607-2004 |
金属材料焊接程序规范和合格鉴定.总则 |
|
DIN EN ISO 15609-1-2005 |
金属材料焊接程序的规范和合格鉴定.焊接程序规范.第1部分:弧焊 |
|
DIN EN ISO 15609-2-2001 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第2部分:气焊 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001); German version EN ISO 15609-2:2001) |
DIN EN ISO 15609-3-2004 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第3部分:电子束焊接 |
|
DIN EN ISO 15609-4-2004 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第4部分:激光束焊接 |
|
DIN EN ISO 15609-5-2004 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第5部分:电阻焊接 |
|
DIN EN ISO 1561-1998 |
牙科嵌入铸蜡嵌体 |
(Dental casting wax (ISO 1561:1995); German version EN ISO 1561:1997) |
DIN EN ISO 15610-2004 |
金属材料焊接过程的规范和合格鉴定.基于已试验过的焊接耗材的合格鉴定 |
(Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003); German version EN ISO 15610:2003) |
DIN EN ISO 15610-2004 |
金属材料焊接过程的规范和合格鉴定.基于已试验过的焊接耗材的合格鉴定 |
|
DIN EN ISO 15611-2004 |
金属材料焊接程序规范和合格鉴定.根据已有的焊接经验进行合格鉴定 |
|
DIN EN ISO 15612-2004 |
金属材料焊接程序的规范和合格评定.通过采用标准焊接程序的合格评定 |
|
DIN EN ISO 15613-2004 |
金属材料焊接程序的规范和合格鉴定.基于生产前焊接试验的鉴定 |
|
DIN EN ISO 15614-1-2004 |
金属材料焊接程序的规范和鉴定.焊接程序试验.第1部分:钢的弧焊接和气焊接以及镍和镍合金的弧焊接 |
|
DIN EN ISO 15614-11-2002 |
金属材料焊接程序的规范和鉴定.焊接程序试验.第11部分:电子和激光束焊接 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002); German version EN ISO 15614-11:2002) |
DIN EN ISO 15614-12-2004 |
金属材料焊接程序的规范和鉴定.焊接程序试验.第12部分:点焊、缝焊和凸焊 |
|
DIN EN ISO 15614-5-2004 |
金属材料焊接程序的规范和鉴定.焊接程序试验.第5部分:钛、锆及其合金的电弧焊接 |
|
DIN EN ISO 15614-8-2002 |
金属材料焊接程序规范和要求.焊接程序试验.第8部分:管对管连接件 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002); German version EN ISO 15614-8:2002) |
DIN EN ISO 15615-2002 |
气体焊接设备.焊接用Acetylenemanifoldsystems、切割和alliedprocesses高压装置的安全要求 |
(Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2002); German version EN ISO 15615:2002) |
DIN EN ISO 15616-1-2003 |
高质量焊接和切割用CO2激光射线机的验收试验.第1部分:通用原理和验收条件 |
(Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003); German version EN ISO 15616-1:2003) |
DIN EN ISO 15616-2-2003 |
高质量焊接和切割用CO2激光射线机的验收试验.第2部分:静态和动态准确度的测定 |
(Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003); German version EN ISO 15616-2:2003) |
DIN EN ISO 15616-3-2003 |
高质量焊接和切割用CO2激光射线机的验收试验.第3部分:气体流量和压力测量仪的校正 |
(Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003) |
DIN EN ISO 15618-1-2002 |
水下焊接的焊工资格鉴定试验.第1部分:超高压湿焊的潜水员焊工 |
(Qualification testing of welders for under-water welding - Part 1: Diver-welders for hyperbaric wet welding (ISO 15618-1:2001); German version EN ISO 15618-1:2001) |
DIN EN ISO 15618-2-2002 |
水下焊接的焊工资格鉴定试验.第2部分:超高压干焊的潜水员焊工和焊接操作员 |
(Approval testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001); German version EN ISO 15618-2:2001) |
DIN EN ISO 1562-1995 |
牙科金铸造合金 |
(Dental casting gold alloys (ISO 1562:1993); German version EN ISO 1562:1995) |
DIN EN ISO 1562-2004 |
牙科.铸金合金 |
|
DIN EN ISO 15620-2000 |
焊接.金属材料的摩擦焊接 |
(Welding - Friction welding of metallic materials (ISO 15620:2000); German version EN ISO 15620:2000) |
DIN EN ISO 15630-1-2002 |
混凝土的钢筋和预应力用钢.试验方法.第1部分:加筋棒、钢丝杆和钢丝 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bar, wire rod and wire (ISO 15630-1:2002); German version EN ISO 15630-1:2002) |
DIN EN ISO 15630-2-2002 |
混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接纤维 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2002); German version EN ISO 15630-2:2002) |
DIN EN ISO 15630-3-2002 |
混凝土的钢筋和预应力用钢.试验方法.第3部分:预应力钢 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steels (ISO 15630-3:2002); German version EN ISO 15630-3:2002) |
DIN EN ISO 1564-1999 |
水化牙科琼脂基印模材料 |
(Dental aqueous impression materials based on agar (ISO 1564:1995); German version EN ISO 1564:1998) |
DIN EN ISO 15641-2001 |
高速切削机床用铣刀.安全要求 |
(Milling cutters for high speed machining - Safety requirements (ISO 15641:2001); German version EN ISO 15641:2001) |
DIN EN ISO 15652-2005 |
小艇.小型喷水推进艇舱内用远程操纵系统 |
|
DIN EN ISO 15652-2005 |
小艇.小型喷水推进艇舱内用远程操纵系统 |
|
DIN EN ISO 15667-2001 |
声学.由外壳和舱室控制噪声的指南 |
(Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000); German version EN 15667:2000) |
DIN EN ISO 1567-2000 |
牙科学-假牙基料聚合物 |
(Dentistry - Denture base polymers (ISO 1567:1999); German version EN ISO 1567:2000) |
DIN EN ISO 15680-2004 |
水质.使用purge-and-trap和热解析法进行若干单环芳烃、萘和一些氯化物的气相色谱测定 |
|
DIN EN ISO 15681-1-2005 |
水质.用流量分析法(FIA和CFA)测定正磷酸盐和总磷含量.第1部分:流量注入分析法 |
|
DIN EN ISO 15681-1-2005 |
水质.用流量分析法(FIA和CFA)测定正磷酸盐和总磷含量.第1部分:流量注入分析法 |
|
DIN EN ISO 15681-2-2005 |
水质.用流量分析法(FIA和CFA)测定正磷酸盐和总磷含量.第2部分:连续流量分析法 |
|
DIN EN ISO 15681-2-2005 |
水质.用流量分析法(FIA和CFA)测定正磷酸盐和总磷含量.第2部分:连续流量分析法 |
|
DIN EN ISO 15682-2002 |
水质.通过流量分析(CFA和FIA)和光度测量或电势检测法测定氯化物含量 |
(Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection (ISO 15682:2000); German version EN ISO 15682:2001) |
DIN EN ISO 15695-2001 |
釉层和搪瓷.末涂瓷漆耐划痕性的测定. |
(Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes (ISO 15695:2000, including Technical Corrigendum 1:2000); German version EN ISO 15695:2001) |
DIN EN ISO 15700-1999 |
皮革.色牢度试验.耐水斑点色牢度 |
(Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998); German version EN ISO 15700:1999) |
DIN EN ISO 15701-1999 |
皮革.色牢度试验.受聚氯乙烯影响的色牢度 |
(Leather - Tests for colour fastness - Colour fastness to migration into plasticized poly(vinyl chloride) (ISO 15701:1998); German version EN ISO 15701:1999) |
DIN EN ISO 15702-1999 |
皮革.色牢度试验.机洗对色牢度的影响 |
(Leather - Tests for colour fastness - Colour fastness to machine washing (ISO 15702:1998); German version EN ISO 15702:1999) |
DIN EN ISO 15703-1999 |
皮革.色牢度试验.轻柔洗涤对色牢度的影响 |
(Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998); German version EN ISO 15703:1999) |
DIN EN ISO 15720-2001 |
金属涂层.孔隙率试验.胶材料电版术法测定金属衬底上金或钯涂层的孔隙率 |
(Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001); German version EN ISO 15720:2001) |
DIN EN ISO 15721-2001 |
金属涂层.孔隙率试验.用亚硫酸和二氧化硫蒸气测定金或钯涂层的孔隙率 |
(Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001); German version EN ISO 15721:2001) |
DIN EN ISO 15744-2002 |
手持非电动工具.噪声测量代码.工程法(2级) |
(Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002); German version EN ISO 15744:2002) |
DIN EN ISO 15747-2005 |
静脉注射用塑料容器 |
|
DIN EN ISO 15747-2005 |
静脉注射用塑料容器 |
|
DIN EN ISO 15747-2005 |
静脉注射用塑料容器 |
|
DIN EN ISO 15748-1-2002 |
船舶和航海技术.在船上和海上建筑物上饮用水的供应.第1部分:计划和设计 |
(Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design (ISO 15748-1:2002); German version EN ISO 15748-1:2002) |
DIN EN ISO 15748-2-2002 |
船舶和航海技术.在船上和海上建筑物上饮用水的供应.第2部分:计算方法 |
(Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation (ISO 15748-2:2002); German version EN ISO 15748-2:2002) |
DIN EN ISO 15749-1-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第1部分:卫生排水系统设计 |
|
DIN EN ISO 15749-2-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第2部分:重力系统用卫生排水和排水管道 |
|
DIN EN ISO 15749-3-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第3部分:真空系统用卫生排水和排水管道 |
|
DIN EN ISO 15749-4-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第4部分:卫生排水和污物处置管 |
|
DIN EN ISO 15749-5-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第5部分:甲板、货舱和游泳池的排水 |
|
DIN EN ISO 15755-1999 |
纸与纸张.反面估算 |
(Paper and board - Estimation of contraries (ISO 15755:1999); German version EN ISO 15755:1999) |
DIN EN ISO 15761-2003 |
石油和天然气工业用规格为DN100及更小的钢闸阀、球阀和止回阀 |
(Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text)) |
DIN EN ISO 15774-2002 |
动植物脂肪和油.用直接石墨熔炉原子吸收光谱法测定镉含量 |
(Animal and vegetable fats and oils - Determination of cadmium content by direct graphite furnace atomic absorption spectrometry (ISO 15774:2000); German version EN ISO 15774:2001) |
DIN EN ISO 15783-2004 |
无封装旋翼动力泵.级别II.规范 |
|
DIN EN ISO 15785-2002 |
技术制图.粘合、折叠和叠压接缝的符号指示和表示法 |
(Technical drawings - Symbolic presentation and indication of adhesive, fold and pressed joints (ISO 15785:2002); German version EN ISO 15785:2002) |
DIN EN ISO 15788-1-2001 |
动植物脂肪和油.植物油中stigmastidenes的测定.第1部分:毛细管柱气相色谱法(基准方法) |
(Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 1: Method using capillary-column gas chromatography (Reference method) (ISO 15788-1:1999); German version EN ISO 15788-1:2001) |
DIN EN ISO 15788-2-2005 |
动植物脂肪和油.植物油中豆固醇的测定.第2部分:高效液相色谱法 |
|
DIN EN ISO 15791-1-2005 |
塑料.塑料产品用中等规模燃烧试验的设计和应用.第1部分:一般指南 |
|
DIN EN ISO 15797 Berichtigung 1-2005 |
纺织品.工作服测试用工业洗涤和整理规程.EN ISO 15797-2004的勘误 |
|
DIN EN ISO 15797-2004 |
纺织材料.工作服检测用工业洗涤和整理规程 |
|
DIN EN ISO 15798 Berichtigung 1-2005 |
眼科植入物.眼科手术粘接件 |
|
DIN EN ISO 15798 Berichtigung 1-2005 |
眼科植入物.眼科手术粘接件 |
|
DIN EN ISO 15798-2001 |
眼科植入物.黏弹性眼科植入装置 |
(Ophthalmic implants - Ophthalmic viscosurgical devices (ISO 15798:2001); German version EN ISO 15798:2001) |
DIN EN ISO 1580-1994 |
带槽平头螺钉.产品等级A |
(Slotted pan head screws - Product grade A (ISO 1580:1994); German version EN ISO 1580:1994) |
DIN EN ISO 15831-2004 |
服饰.生理效应.用热的人体模型法测量隔热性 |
|
DIN EN ISO 15854-2005 |
牙科学.铸型蜡和假牙托蜡 |
|
DIN EN ISO 15874-1-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).第1部分:总则 |
|
DIN EN ISO 15874-2-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).第2部分:管道 |
|
DIN EN ISO 15874-3-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).第3部分:配件 |
|
DIN EN ISO 15874-5-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).第5部分:系统的适应性 |
|
DIN EN ISO 15875-1-2004 |
冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第1部分:总则 |
|
DIN EN ISO 15875-2-2004 |
冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第2部分:管道 |
|
DIN EN ISO 15875-3-2004 |
冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第3部分:配件 |
|
DIN EN ISO 15875-5-2004 |
冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第5部分:系统的适应性 |
|
DIN EN ISO 15876-1-2004 |
冷热水装置用塑料管道设备.聚丁烯(PB).第1部分:总则 |
|
DIN EN ISO 15876-2-2004 |
冷热水装置用塑料管道设备.聚丁烯(PB).第2部分:管道 |
|
DIN EN ISO 15876-3-2004 |
冷热水装置用塑料管道设备.聚丁烯(PB).第3部分:配件 |
|
DIN EN ISO 15876-5-2004 |
冷热水装置用塑料管道设备.聚丁烯(PB).第5部分:系统的适应性 |
|
DIN EN ISO 15877-1-2004 |
冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第1部分:总则 |
|
DIN EN ISO 15877-2-2004 |
冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第2部分:管道 |
|
DIN EN ISO 15877-3-2004 |
冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第3部分:配件 |
|
DIN EN ISO 15877-5-2004 |
冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第5部分:系统的适应性 |
|
DIN EN ISO 15880-2004 |
色漆、清漆和粘合剂.水基涂料和粘合剂的MEQ值的测定 |
|