标准号 |
中文名称 |
英文名称 |
DIN EN ISO 11654-1997 |
声学.建筑物中用的声吸收器.声音吸收评定 |
(Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997); German version EN ISO 11654:1997) |
DIN EN ISO 11667-1999 |
纤维增强塑料.模压化合物和聚酯胶片.树脂,纤维增强和矿物填料含量的测定.溶解方法 |
(Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999) |
DIN EN ISO 11668-2001 |
涂料和清漆用粘结剂.氯化聚合树脂.通用试验方法 |
(Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test (ISO 11668:1997); German version EN ISO 11668:2001) |
DIN EN ISO 11670-1999 |
激光与激光相关仪器.激光束参数试验方法.束的位置稳定性 |
(Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:1999); German version EN ISO 11670:1999) |
DIN EN ISO 11674-2002 |
船舶和航海技术.航向控制系统 |
(Ships and marine technology - Heading control systems (ISO 11674:2000); German version EN ISO 11674:2001) |
DIN EN ISO 11680-1-2002 |
林业机械.动力杆式修枝锯的安全要求和试验.第1部分:侧挂式杆式修枝锯 |
(Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with integral combustion engine (ISO 11680-1:2000); German version EN ISO 11680-1:2000 + AC:2002) |
DIN EN ISO 11680-2-2002 |
林业机械.动力杆式修枝锯的安全要求和试验.第2部分:携背负式杆式修枝锯 |
(Machinery for forestry - Safety requirements and testing for pole-mounted pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000); German version EN ISO 11680-2:2000 + AC:2002) |
DIN EN ISO 11681-1-2004 |
林业机械.便携式链锯的安全要求和试验.第1部分:林业专用链锯 |
|
DIN EN ISO 11681-2-1998 |
林业机械.便携式电锯.安全要求和试验.第2部分:树木砍伐用电锯 |
(Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:1998); German version EN ISO 11681-2:1998) |
DIN EN ISO 11681-2-2004 |
林业机械.便携式链锯的安全要求和试验.第2部分:修枝锯 |
|
DIN EN ISO 11683-1997 |
包装.危险接触警告.要求 |
(Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997); German version EN ISO 11683:1997) |
DIN EN ISO 11688-1-1998 |
声学.低噪音机械和设备的设计用推荐规程.第1部分:计划 |
(Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995); German version EN ISO 16688-1:1998) |
DIN EN ISO 11688-2-2001 |
声学.低噪声机械和设备设计的推荐实施规程.第2部分:低噪声设计的物理学说明 |
(Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998); German version EN ISO 11688-2:2000) |
DIN EN ISO 11689-1997 |
声学.机器和设备躁音释放数值的比较方法 |
(Acoustics - Procedure for the comparison of noise emission-data for machinery and equipment (ISO 11689:1996); German version EN ISO 11689:1996) |
DIN EN ISO 11690-1-1997 |
声学.装有机器的工作场地较弱噪音设计的规程.第1部分:一般原理 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996); German version EN ISO 11690-1:1996) |
DIN EN ISO 11690-2-1997 |
声学.装有机器的工作场地较弱噪音设计的规程.第2部分:降低噪音的措施 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996); German version EN ISO 11690-2:1996) |
DIN EN ISO 11690-3-1999 |
声学.低噪音车间(含机械噪音)设计的推荐实用规程.第3部分:工作室中噪音降低和声音的传播 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms (ISO/TR 11690-3:1997); German version EN ISO 11690-3:1998) |
DIN EN ISO 11691-1996 |
无流体管道中消声器介入衰减程度的测量.精度等级3的实验室法 |
(Acoustics - Determination of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:1995) |
DIN EN ISO 1172-1998 |
纺织玻璃纤维增强塑料.预浸料坯,模塑材料及叠层板材.纺织玻璃纤维和矿物填充料含量的测定.煅烧法 |
(Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods (ISO 1172:1996); German version EN ISO 1172:1998) |
DIN EN ISO 11721-1-2001 |
织物.含纤维素织物对微生物耐性的测定.土壤埋试验.第1部分:腐烂延迟完成的评价 |
(Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 1: Assessment of rot-retardant finishing (ISO 11721-1:2001); German version EN ISO 11721-1:2001) |
DIN EN ISO 11732-1997 |
水质.用水流分析(CFA和FIA)和光谱检测法测定氨氮 |
(Water quality - Determination of ammonium nitrogen by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:1997); German version EN ISO 11732:1997) |
DIN EN ISO 11732-2005 |
水质.铵氮的测定.水流分析(CFA和FIA)和光谱检测法 |
|
DIN EN ISO 11733-1998 |
水质.水介质中有机化合物的消除和可生物降解性的评定.活性污泥模拟试验 |
(Water quality - Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:1995); German version EN ISO 11733:1998) |
DIN EN ISO 11733-2004 |
水质.水介质中有机化合物的生物降解和去除率的测定.活性污泥模拟试验 |
|
DIN EN ISO 11734-1998 |
水质.腐泥中有机化合物的`最终`厌氧生物降解能力评定.生物气体生产的测量方法 |
(Water quality - Evaluation of the “ultimate“ anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production (ISO 11734:1995); German version EN ISO 11734:1998) |
DIN EN ISO 11737-2-2000 |
医疗器械的灭菌.微生物法.第2部分:灭菌证实过程的无菌检验 |
(Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the validation of a sterilization process (ISO 11737-2:1998); German version EN ISO 11737-2:2000) |
DIN EN ISO 11758-1997 |
橡胶和塑料软管.氙弧灯的曝光.颜色和外观的变化 |
(Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance (ISO 11758:1995); German version EN ISO 11758:1997) |
DIN EN ISO 11806-1997 |
农业和林业机械.便携手提燃机驱动丛林修剪机和割草机.安全 |
(Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997); German version EN ISO 11806:1997) |
DIN EN ISO 11807-1-2005 |
集成光学.词汇.第1部分:基本术语和符号 |
|
DIN EN ISO 11807-1-2005 |
集成光学.词汇.第1部分:基本术语和符号 |
|
DIN EN ISO 11807-2-2005 |
集成光学.词汇.第2部分:分类用术语 |
|
DIN EN ISO 11807-2-2005 |
集成光学.词汇.第2部分:分类用术语 |
|
DIN EN ISO 1181-2005 |
纤维绳索.马尼拉麻和西沙尔麻绳索.3、4和8股绳 |
|
DIN EN ISO 11810-1-2005 |
激光和激光有关设备.手术布单和/或病人保护用覆盖物耐激光性试验方法和分类.第1部分:基本点燃和穿透性 |
|
DIN EN ISO 11810-1-2005 |
激光和激光有关设备.手术布单和/或病人保护用覆盖物耐激光性试验方法和分类.第1部分:基本点燃和穿透性 |
|
DIN EN ISO 11810-2003 |
光学和光学仪器.激光和激光有关设备.手术布单和/或病人防护覆盖层耐激光的试验方法 |
(Optics and optical instruments - Laser and laser-related equipment - Test method for the laser-resistance of surgical drapes and/or patient protective covers (ISO 11810:2002); German version EN ISO 11810:2002) |
DIN EN ISO 11812-2003 |
小艇.水密座舱和快速排干座舱 |
(Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001); German version EN ISO 11812:2001) |
DIN EN ISO 11816-1-2000 |
牛奶和奶制品.荧光计法测定碱性磷酸酶的活性.第1部分:牛奶和牛奶饮料 |
(Milk and milk products - Determination of alkaline phosphatase activity using a fluorimetric method - Part 1: Milk and milk-based drinks (ISO 11816-1:1997); German version EN ISO 11816-1:2000) |
DIN EN ISO 11816-2-2003 |
奶和奶制品.碱性磷酸酶的活性测定.第2部分:乳酪的荧光计法 |
(Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Fluorometric method for cheese (ISO 11816-2:2003); German version EN ISO 11816-2:2003) |
DIN EN ISO 11819-1-2002 |
声学.路面对交通噪声影响的测量.第1部分:旁路统计法 |
(Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method (ISO 11819-1:1997); German version EN ISO 11819-1:2001) |
DIN EN ISO 1182-2002 |
建筑物产品对火焰试验的反应.不可燃性试验 |
(Reaction to fire tests for building products - Non-combustibility tests (ISO 1182:2002); German version EN ISO 1182:2002) |
DIN EN ISO 11820-1997 |
声学.现场用消声器的测量 |
(Acoustics - Measurements on silencers in situ (ISO 11820:1996); German version EN ISO 11820:1996) |
DIN EN ISO 11821-1997 |
声学.测量插入状态下可移动助音板的消音 |
(Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997); German version EN ISO 11821:1997) |
DIN EN ISO 1183-1-2004 |
塑料.非泡沫塑料的密度测定方法.第1部分:浸入法、液体比重瓶法和滴定法 |
|
DIN EN ISO 1183-2-2004 |
塑料.非泡沫塑料的密度测定方法.第2部分:密度梯度柱法 |
|
DIN EN ISO 1183-3-2000 |
塑料.非多孔塑料的密度测定方法.第3部分:气体比重瓶测量法 |
(Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999) |
DIN EN ISO 11857-2002 |
纺织地板覆盖物.测定剥离耐力 |
(Textile floor coverings - Determination of resistance to delamination (ISO 11857:1999); German version EN ISO 11857:2002) |
DIN EN ISO 11885-1998 |
水质.用引导耦合等离子体原子发射光谱法测定33种素 |
(Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy (ISO 11885:1996); German version EN ISO 11885:1997) |
DIN EN ISO 11890-1-2002 |
涂料和清漆.挥发性有机化合物含量的测定.第1部分:差别法 |
(Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2000); German version EN ISO 11890-1:2001) |
DIN EN ISO 11890-2-2002 |
涂料和清漆.挥发性有机化合物含量的测定.第2部分:气相色谱法 |
(Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gaschromatographic method (ISO 11890-2:2000); German version EN ISO 11890-2:2001) |
DIN EN ISO 11897-2001 |
包装.热塑软薄膜制袋.折边处的撕裂扩展试验 |
(Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999); German version EN ISO 11897:2001) |
DIN EN ISO 119-1998 |
塑料.酚醛塑料模制件.游离酚的测定.碘量法 |
(Plastics - Phenol-formaldehyde mouldings - Determination of free phenols; Iodometric method (ISO 119:1977); German version EN ISO 119:1998) |
DIN EN ISO 11904-1-2003 |
声学.从接近耳朵的声源处测定声发射强度.利用真耳中传声器技术(MIRE技术) |
(Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 1: Technique using microphone in real ear (MIRE-technique) (ISO 11904-1:2002); German version EN ISO 11904-1:2002) |
DIN EN ISO 11904-2-2005 |
声学.从接近耳朵的声源处测定声排放强度.第2部分:利用人体模型技术 |
|
DIN EN ISO 11905-1-1998 |
水质.氮的测定.第1部分:用过氧焦硫酸盐进行氧化溶解法测定氮含量 |
(Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate (ISO 11905-1:1997); German version prEN ISO 11905-1:1998) |
DIN EN ISO 11908-1998 |
漆和涂料用粘合剂.胺树脂.一般检验法 |
(Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996); German version EN ISO 11908:1998) |
DIN EN ISO 11909-1998 |
清漆和涂料用粘合剂.聚异氰酸树脂.一般检验法 |
(Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:1996); German version EN ISO 11909:1998) |
DIN EN ISO 11925-2-2002 |
建筑产品的对火反应试验.第2部分:火焰直接作用下建筑产品的可燃性. |
(Reaction to fire tests for building products - Part 2: Ignitability when subjected to direct impingement of flame (ISO 11925-2:2002); German version EN ISO 11925-2:2002) |
DIN EN ISO 11957-1997 |
声学.隔声间隔音测量.实验室内和在使用情况下的测量 |
(Acoustics - Determination of sound insulation performance of sound protecting cabins - Laboratory and in situ measurements (ISO 11957:1996); German version EN ISO 11957:1996) |
DIN EN ISO 11960-1998 |
石油和天然气工业.蓄水管和套管用钢管 |
(Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:1996); German version EN ISO 11960:1998) |
DIN EN ISO 11960-2003 |
石油和天然气工业.油井套管或油管用钢管 |
(Petroleum and natural gas industries - Steel pipes for use as casting or tubing for wells (ISO 11960:2001 + Cor. 1:2002); German and English version EN ISO 11960:2001 + AC:2002) |
DIN EN ISO 11960-2005 |
石油和天然气工业.油井套管或油管用钢管 |
|
DIN EN ISO 11960-2005 |
石油和天然气工业.油井套管或油管用钢管 |
|
DIN EN ISO 11961-1997 |
石油和天然气工业.钻井杆用钢管.要求 |
(Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996); German version EN ISO 11961:1996) |
DIN EN ISO 11963-1995 |
塑料.聚碳酸酯薄板材.交货类型,尺寸和特性 |
(Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:1995); German version EN ISO 11963:1995) |
DIN EN ISO 11969-1996 |
水质.砷的测定.原子吸收分光光度法(氢化技术) |
(Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996); German version EN ISO 11969:1996) |
DIN EN ISO 11978-2000 |
眼科光学.接触镜片和接触镜片护理产品.制造商提供的信息 |
(Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000); German version EN ISO 11978:2000) |
DIN EN ISO 11979-1-2000 |
眼科植入物.眼内晶状体透镜.第1部分:词汇 |
(Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:1999); German version EN ISO 11979-1:1999) |
DIN EN ISO 11979-2 Berichtigung 1-2005 |
眼科植入物.眼内透镜.光学特性和试验方法 |
|
DIN EN ISO 11979-2 Berichtigung 1-2005 |
眼科植入物.眼内透镜.光学特性和试验方法 |
|
DIN EN ISO 11979-2-2000 |
眼科植入.眼内晶状体透镜.第2部分:光学特性和试验方法 |
(Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods (ISO 11979-2:1999); German version EN ISO 11979-2:1999) |
DIN EN ISO 11979-4-2000 |
眼科植入物.眼内透镜.第4部分:贴标签和信息 |
(Ophthalmic implants - Intraocular lenses - Part 4: Labelling and information (ISO 11979-4:2000); German version EN ISO 11979-4:2000) |
DIN EN ISO 11980-1998 |
眼科光学.接触镜片和接触镜片护理剂.临床检验指南 |
(Opthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:1997); German version EN ISO 11980:1997) |
DIN EN ISO 11981-1999 |
眼科光学.接触镜片和接触镜片保护产品.带接触镜片的接触镜片保护产品物理一致性的测定 |
(Ophthalmic optics - Contact lenses and contact lens care products - Determination of the physical compatibility of contact care products lenses with contact lenses (ISO 11981:1999); German version EN ISO 11981:1999) |
DIN EN ISO 11984-2000 |
眼科光学.接触镜片.刚性镜片弯曲和断裂强度的测定 |
(Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage (ISO 11984:1999); German version EN ISO 11984:1999) |
DIN EN ISO 11985-1998 |
眼科光学.接触镜片.由于紫外线和可视射线作用造成的老化(试管法) |
(Opthalmic optics - Contact lenses - Ageing by exposure to UV and visible radiation (in vitro method) (ISO 11985:1997); German version EN ISO 11985:1997) |
DIN EN ISO 11986-2000 |
眼科光学.接触镜片和接触镜片护理产品.紧张和放松状态下保持性的测定指南 |
(Ophthalmic optics - Contact lenses and contact lens care products - Guidelines for the determination of preservative uptake and release (ISO 11986:1999); German version EN ISO 11986:2000) |
DIN EN ISO 11987-1998 |
眼科光学.接触镜片.支架寿命的测定 |
(Ophthalmic optics - Contact lenses - Determination of shelf-life (ISO 11987:1997); German version EN ISO 11987:1997) |
DIN EN ISO 11990-1999 |
光学和光学仪器.激光和激光相关设备.气管导管柄激光抗性的测定 |
(Optics and optical instruments - Laser and laser-related equipment - Determination of laser resistance of tracheal tube shafts (ISO 11990:1999); German version EN ISO 11990:1999) |
DIN EN ISO 11998-2001 |
涂料和清漆.涂层耐湿式洗涤和清洁度测定 |
(Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:1998); German version EN ISO 11998:2001) |
DIN EN ISO 120-1998 |
塑料.酚醛塑料模制件.游离氨和铵化合物的测定.比色法 |
(Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds; Colorimetric comparison method (ISO 120:1977); German version EN ISO 120:1998) |
DIN EN ISO 12001-1997 |
声学.机械和仪器的产生噪音辐射.噪音测量标准的制定和结构形成的规则 |
(Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996); German version EN ISO 12001:1996) |
DIN EN ISO 12005-1999 |
激光和激光相关设备.激光束参数的试验方法.偏振 |
(Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:1999); German version EN ISO 12005:1999) |
DIN EN ISO 12017-1996 |
塑料.聚甲基丙烯酸甲酯双合板和三合板.试验方法 |
(Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:1995); German version EN ISO 12017:1996) |
DIN EN ISO 12020-2000 |
水的质量.铝的测定.用原子吸收光谱法 |
(Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997); German version EN ISO 12020:2000) |
DIN EN ISO 12048-2001 |
包装.完全满运输包装件.利用压缩试验机的压缩试验和堆积试验 |
(Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994); German version EN ISO 12048:2000) |
DIN EN ISO 12058-1-2002 |
塑料.使用落球式粘度计测定粘度.第1部分:斜管法 |
(Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997); German version EN ISO 12058-1:2002) |
DIN EN ISO 1207-1994 |
一字槽圆柱头螺钉.A级产品 |
(Slotted cheese head screws - Product grade A (ISO 1207:1992); German version EN ISO 1207:1994) |
DIN EN ISO 12085-1998 |
几何产品规范(GPS).表面纹理:外形法.主要参数 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997) |
DIN EN ISO 12086-1-2000 |
塑料.含氟聚合物的分散,模塑和挤压材料.第1部分:标识和规范 |
(Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation and specification (ISO 12086-1:1995); German version EN ISO 12086-1:1999) |
DIN EN ISO 12086-2-2000 |
塑料.含氟聚合物的分散,模塑和挤压材料.第2部分:试样制备和性能测定 |
(Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:1995); German version EN ISO 12086-2:1999) |
DIN EN ISO 12100-1-2004 |
机械安全.基本概念和设计通则.第1部分:基本术语、方法学 |
|
DIN EN ISO 12100-2-2004 |
机械安全.设计用基本概念和总则.第2部分:技术总则 |
|
DIN EN ISO 1211-2001 |
牛奶.脂肪含量的测定.重量分析法(基准方法) |
(Milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1211:1999); German version EN ISO 1211:2001) |
DIN EN ISO 12114-1997 |
纤维增强塑料.热固性模塑化合物和聚酯胶片.固化特性的测定 |
(Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997); German version EN ISO 12114:1997) |
DIN EN ISO 12115-1997 |
纤维增强塑料.热固性模塑化合物和聚酯胶片.流动性,熟化和使用寿命的测定 |
(Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997); German version EN ISO 12115:1997) |
DIN EN ISO 12138-1997 |
纺织材料.作易燃性试验前纺织纤维的家用洗涤方法 |
(Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing (ISO 12138:1996); German version EN ISO 12138:1996) |
DIN EN ISO 12162-1996 |
压力管道和配件用热塑性塑料.分类和材料标识.整体载荷(计算)系数 |
(Classification of thermoplastic materials in pipe form based on the resistance against internal hydrostatic pressure - Material designation and calculations (ISO 12162:1995); German version EN ISO 12162:1995) |
DIN EN ISO 12163-2000 |
牙科基盘/制模蜡 |
(Dental baseplate/modelling wax (ISO 12163:1999); German version EN ISO 12163:2000) |
DIN EN ISO 12179-2000 |
几何产品规范(GPS).表面特征:外形法.接触(针式)仪器的校准 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000); German version EN ISO 12179:2000) |
DIN EN ISO 12185-1997 |
原油和石油产品.密度测定.振荡U形管法 |
(Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996); German version EN ISO 12185:1996) |
DIN EN ISO 12193-1999 |
动物和植物的油和脂肪.铅含量的测定.石墨炉-原子吸收法 |
(Animal and vegetable fats and oils - Determination of lead content - Graphite furnace atomic absorption method (ISO 12193:1994); German version EN ISO 12193:1999) |
DIN EN ISO 12193-2004 |
动植物油脂.用直接石墨炉原子吸收光谱法测定铅含量 |
|
DIN EN ISO 12205-1996 |
石油产品.柴油燃料氧化稳定性的测定 |
(Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995); German version EN ISO 12205:1996) |
DIN EN ISO 12209-1-2001 |
储气瓶.压缩吸气用储气瓶阀门的出口连接件.第1部分:轭式连接件 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000); German version EN ISO 12209-1:2000) |
DIN EN ISO 12209-2-2001 |
储气瓶.压缩吸气用储气瓶阀门的出口连接件.第2部分:螺纹连接件 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000); German version EN ISO 12209-2:2000) |
DIN EN ISO 12209-3-2001 |
储气瓶.压缩吸气用储气瓶阀门的出口连接件.第2部分:230bar阀门的适配器 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adapter for 230 bar valves (ISO 12209-3:2000); German version EN ISO 12209-3:2000) |
DIN EN ISO 12213-1-2005 |
天然气.压缩因子的计算.第1部分:说明和指南 |
|
DIN EN ISO 12213-2-2005 |
天然气.压缩因子的计算.第2部分:摩尔代数运算分析 |
|
DIN EN ISO 12213-3-2005 |
天然气.压缩因子的计算.第3部分:用物理特性计算 |
|
DIN EN ISO 12215-1-2001 |
小型船舶.传体建筑和草图.第1部分:材料.热固树脂玻璃纤维增强的标准叠层板材 |
(Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000); German version EN ISO 12215-1:2000) |
DIN EN ISO 12215-2-2002 |
小型船舶.船体结构和船材尺寸.第2部分:材料:夹层结构用心材料,嵌入材料 |
(Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002); German version EN ISO 12215-2:2002) |
DIN EN ISO 12215-3-2002 |
小型船舶.船体结构和船材尺寸.第3部分:材料:钢,铝合金,木料及其它材料 |
(Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002); German version EN ISO 12215-3:2002) |
DIN EN ISO 12215-4-2002 |
小型船舶.船体结构和船材尺寸.第4部分:车间和制造工厂 |
(Small craft - Hull construction and scantlings - Part 4: Workshops and manufacturing (ISO 12215-4:2002); German version EN ISO 12215-4:2002) |
DIN EN ISO 12216-2002 |
小型船舶.窗户、船灯、舱口、舷窗盖和门.强度和防水性要求 |
(Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2002); German version EN ISO 12216:2002) |
DIN EN ISO 12217-1-2002 |
小型船舶.稳定性和浮力评估和分类.第1部分:船体大于或等于6米的无帆小艇 |
(Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2002), German version EN ISO 12217-1:2002) |
DIN EN ISO 12217-2-2002 |
小型船舶.稳定性和浮力评估和分类.第2部分:船体大于或等于6米的带帆小艇 |
(Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2002); German version EN ISO 12217-2:2002) |
DIN EN ISO 12224-1-1998 |
助熔填充焊丝和实心焊条.规范和试验方法.第1部分:分类和性能要求 |
(Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements (ISO 12224-1:1997); German version EN ISO 12224-1:1998) |
DIN EN ISO 12224-2-1999 |
填充焊剂的焊条.规定和检验方法.第2部分:焊剂含量的测定 |
(Flux cored solder wire - Specification and test methods - Part 2: Determination of flux content (ISO 12224-2:1997); German version EN ISO 12224-2:1999) |
DIN EN ISO 12228-1999 |
动物和植物的油和脂肪.分别的和总的甾醇含量的测定.气相色谱法 |
(Animal and vegetable fats and oils - Determination of individual and total sterols contents - Gas chromatographic method (ISO 12228:1999); German version EN ISO 12228:1999) |