标准号 |
中文名称 |
英文名称 |
| DIN 74362-1-1982 |
载重汽车挂车及大客车挂车用带有压入深度及8个螺栓紧固的盘轮制动鼓.最大外廓 |
(Brake drums for offset disc wheels of truck and bus trailers with 8 bolt mounting; maximum outline) |
| DIN 74362-10-1980 |
有陡边轮缘的载重汽车及其挂车用带有压入深度.用10个螺栓紧固的盘轮制动鼓.最大外廓 |
(Brake drums for inset disk wheels of commercial vehicles and their trailers with 10 bolt fastening; maximum outline) |
| DIN 74362-2-1982 |
载重汽车挂车及大客车挂车用带有压入深度及10个螺栓紧固的盘轮制动鼓.最大外廓 |
(Brake drums for offset disc wheels of truck and bus trailers with 10 bolt mounting; maximum outline) |
| DIN 74362-3-1982 |
载重汽车挂车及大客车挂车用不带压入深度.带8个或10个螺栓紧固的盘轮制动鼓.最大外廓 |
(Brake drums for disc wheels without offset of truck and bus trailers with 8 or 10 bolt mounting; maximum outline) |
| DIN 74362-4-1982 |
载重汽车用带有压入深度.用8个螺栓紧固的盘轮制动鼓.最大外廓 |
(Brake drums for offset disc wheels of commercial vehicles with 8 bolt mounting; maximum outline) |
| DIN 74362-5-1982 |
载重汽车用带有压入深度用10个螺栓紧固的盘轮制动鼓.最大外廓 |
(Brake drums for offset disc wheels of commercial vehicles with 10 bolt mounting; maximum outline) |
| DIN 74362-6-1982 |
载重汽车用不带压入深度用8个或10个螺栓紧固的盘轮制动鼓.最大外廓 |
(Brake drums for disc wheels without offset of commercial vehicles with 8 or 10 bolt mounting; maximum outline) |
| DIN 74362-7-1987 |
15英寸轮圈的载重汽车用不带压入深度用6个或10个螺栓紧固的盘轮制动鼓.最大外廓 |
(Brake drums for disc wheels with rim diameter designation 15 without offset for 6 or 10 bolt mounting, maximum outline) |
| DIN 74362-8-1987 |
15英寸轮圈的载重汽车用带有压入深度.用6个或10个螺栓紧固的盘轮制动鼓.最大外廓 |
(Brake drums for offset disc wheels rim diameter designation 15 for 6 or 10 bolt mounting; maximum outline) |
| DIN 74363-1-1982 |
带有轮连接件ＢＺ5×112的轿车挂车的制动鼓.最大外廓 |
(Brake drums for passenger car trailers with 5 bolt mounting and pitch circle dia. 112 mm (BZ 5112); maximum outline) |
| DIN 74363-2-1982 |
带有轮连接件ＢＺ5×120的轿车挂车的制动鼓.最大外廓 |
(Brake drums for passenger car trailers with 5 bolt mounting and pitch circle dia. 120 mm (BZ 5120); maximum outline) |
| DIN 7437-1998 |
1000V以下的绝缘工具.有槽螺钉用旋具 |
(Insulated tools up to 1000 V - Screwdrivers for slotted head screws) |
| DIN 74371-1-1979 |
摩托车的挠曲轮辐 |
(Spokes, bend off, for motorcycles) |
| DIN 74371-2-1979 |
轮辐.摩托车轮辐的内接头 |
(Nipples for spokes for motorcycles) |
| DIN 7439-1998 |
1000V以下的绝缘工具.内六角螺钉用旋具 |
(Insulated tools up to 1000 V - Keys with handle for hexagon socket screws) |
| DIN 7441-1968 |
锻工羊角砧 |
(Anvil horn) |
| DIN 7442-1968 |
锻工方柄凿 |
(Blacksmiths` hardy) |
| DIN 7444-1982 |
棒形单头梅花扳手 |
(Slugging wrenches, box) |
| DIN 7445-1998 |
1000V以下的绝缘工具.带手柄的套筒旋具 |
(Insulated tools up to 1000 V - Socket wrenches, spin type) |
| DIN 7446-1998 |
1000V以下的绝缘工具.单头开固定口旋具 |
(Insulated tools up to 1000 V - Engineer wrenches, single head) |
| DIN 7447-1998 |
1000V以下电压的绝缘工具.单头高颈梅花旋具 |
(Insulated tools up to 1000 V - Box (ring) wrenches, single end, deep offset) |
| DIN 7448-1998 |
1000V以下的绝缘工具.手动六角头螺钉用内四角套筒旋具组件 |
(Insulated tools up to 1000 V - Square drive socket wrenches, hand operated) |
| DIN 7449-1998 |
1000V以下的绝缘工具.带有外四方头的棘轮 |
(Insulated tools up to 1000 V - Ratchet handles) |
| DIN 7461-1969 |
细木工用木锤 |
(Carpenters mallets) |
| DIN 7462-1970 |
木锤 |
(Wooden hammers) |
| DIN 7463-1972 |
五金配件.挂锁用的搭扣和止动件 |
(Padlock staples and swivel hasps) |
| DIN 7464-1983 |
嵌入式箱用锁 |
(Case lock; flush type) |
| DIN 7465-1966 |
挂锁 |
(Padlocks) |
| DIN 7469-1983 |
箱角保护套 |
(Corner protection for boxes) |
| DIN 747-1976 |
机器的轴高 |
(Shaft heights for driving and driven machines) |
| DIN 7472-1-1985 |
安全器械；铝制附件；尺寸.交货技术条件 |
(Safety harness; aluminium fittings; dimensions, technical delivery conditions) |
| DIN 7472-2-1991 |
安全器械.钢制附件.连接尺寸.安全技术要求和检验 |
(Safety harness; steel fittings; connecting dimensions, safety requirements and testing) |
| DIN 7473-1983 |
滑动轴承.圆柱形孔整体厚壁多层滑动轴承 |
(Plain bearings; thick-walled multilayer plain bearings with cylindrical bore, undivided) |
| DIN 7474-1983 |
滑动轴承.圆柱形孔分开的厚壁多层滑动轴承 |
(Plain bearings; thick-walled multilayer plain bearings with cylindrical bore, divided) |
| DIN 7477-1983 |
滑动轴承.厚壁多层滑动轴承的润滑油腔 |
(Plain bearings; bore reliefs for thick-walled multilayer plain bearings) |
| DIN 7478-1993 |
安全带状装置.采矿时身体上部用安全带 |
(Safety harnesses - Upper body harness for mining) |
| DIN 748-1-1970 |
圆柱形轴端.尺寸.额定传矩 |
(Cylindrical Shaft Ends; Dimensions, Nominal Transmissible Torques) |
| DIN 748-3-1975 |
电机的圆柱形轴端 |
(Cylindrical Shaft Ends for Electrical Machines) |
| DIN 7480-1966 |
木工钻.单槽麻花钻 |
(Wood bits; single fluted twist bits (twist drills)) |
| DIN 7481-1966 |
木工钻.长柄螺旋钻 |
(Wood bits; single twist hand angers (gimlet bits)) |
| DIN 7482-1966 |
带孔的木钻用木柄 |
(Wooden handles for eyed wood bits) |
| DIN 7483-1966 |
木工钻.采伐木用钻和美工用钻 |
(Wood bits; Forstner bits and multi spur machine bits) |
| DIN 7487-1966 |
木工钻.双槽麻花钻 |
(Wood bits; two fluted twist bits (twist drills)) |
| DIN 7489-1969 |
木工钻.空心麻花钻 |
(Wood bits; hollow augers) |
| DIN 7490-1993 |
木材加工用麻花钻.模板钻和装修钻 |
(Twist drills for woodworking; boarding and plumbing augers) |
| DIN 7500-1-2000 |
ISO米制螺纹的滚丝螺钉.第1部分:型号、名称与符号、要求 |
(Thread rolling screws for metric ISO thread - Part 1: Types, designation, requirements) |
| DIN 7500-2-1984 |
ISO米制螺纹内螺纹滚压的螺钉.孔径的标准值 |
(Thread rolling screws for ISO metric thread; guideline values for hole diameters) |
| DIN 75001-1981 |
汽车测量仪器的应用级别 |
(Classes of Application for Measuring Devices in Motor Vehicles) |
| DIN 75012-1986 |
公路液罐车.测液位装置.连接尺寸 |
(Road tankers; dipstick assembly; mating dimensions) |
| DIN 75013-1979 |
公路液罐车.接地搭板.连接尺寸 |
(Tank trucks; grounding plate, dimensions) |
| DIN 75014-1991 |
公路液罐车用拱顶盖.圆形.连接尺寸 |
(Dome cover for tank trucks, cylindrical; dimensions) |
| DIN 75031-1995 |
载货汽车和挂车.调车.信号装置.要求和检验 |
(Commercial vehicles and towed vehicles - Obstacle detection devices during reversing - Requirements and tests) |
| DIN 75077-1992 |
行走不便的人员用车辆.概念.要求.检验 |
(Busses for disabled persons - Definitions, requirements, test) |
| DIN 75078-1-1990 |
残疾人用汽车(BTW).概念.要求.检验 |
(Motor vehicle for the transportation of handicapped persons; definitions, requirements, test) |
| DIN 75078-1-2004 |
残疾人运送用汽车.第1部分:术语、定义、要求和试验 |
|
| DIN 75078-2-1999 |
残疾人用汽车(BTW).第2部分:减震系统.概念.要求.检验 |
(Motor vehicle for the transportation of handicapped persons - Part 2: Restraint systems; concepts, requirements, testing) |
| DIN 75079 Berichtigung 1-2004 |
对DIN 75079-2002的勘误 |
|
| DIN 75079-1993 |
急救医疗车.概念、要求、检验 |
(Fast emergency car for first aid by special medical doctor; concepts, requirements, test) |
| DIN 75081-1990 |
运尸体的汽车(BKW) |
(Hearse) |
| DIN 7513-1995 |
切削螺纹螺钉.六角头螺钉.槽螺钉.尺寸.要求.检验 |
(Thread cutting screws - Hexagon screws and slotted head screws - Dimensions, requirements, testing) |
| DIN 7516-1995 |
带十字槽螺纹切削螺钉.尺寸.要求和检验 |
(Thread cutting screws - Cross recessed head screws - Dimensions, requirements, testing) |
| DIN 75200-1980 |
汽车内部设备用材料燃烧性能测定 |
(Determination of burning behaviour of interior materials in motor vehicles) |
| DIN 75201-1992 |
道路汽车内挡风玻璃的雾气凝结性能的测定 |
(Determination of the windscreen fogging characteristics of trim materials in motor vehicles) |
| DIN 75203-1988 |
载重汽车的全自动集中润滑设备 |
(Automatic centralized lubrication systems for commercial vehicles) |
| DIN 75204 Bb.1-1992 |
公路车辆.交通事故分析和损坏的机械装置.关键词索引 |
(Road vehicles; traffic accident analysis; index) |
| DIN 75204-1-1992 |
公路车辆.交通事故分析和损坏的机械装置.交通事故分析的概念 |
(Road vehicles; traffic accident analysis; concepts associated with accident reconstruction) |
| DIN 75204-2-1992 |
公路车辆.交通事故分析和损坏的机械装置.轨迹类型和轨道特点的概念 |
(Road vehicles; traffic accident analysis; concepts associated with trace types and characteristics) |
| DIN 75204-3-1992 |
公路车辆.交通事故分析和损坏的机械装置.数据收集研究的概念 |
(Road vehicles; traffic accident analysis and mechanics of injury; concepts allocated with data collection) |
| DIN 75220-1992 |
太阳模拟设备中汽车组件的老化 |
(Ageing of automotive components in solar simulation units) |
| DIN 7523-2-1986 |
钢锻件.模锻件的造型.加工余量.拔模斜度.棱角倒圆.空槽.底厚.壁厚.筋板宽度及筋顶倒圆 |
(Steel forgings; design of drop and press forgings; machining allowances, drafts, edge radii, fillet radii, base thicknesses, wall thicknesses, rib widths, and rib radii) |
| DIN 7527-1-1971 |
钢锻件.自由锻造的圆盘的加工余量及允许偏差 |
(Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Discs) |
| DIN 7527-2-1971 |
钢锻件.自由锻造的带孔圆盘的加工余量及允许偏差 |
(Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Pierced Discs) |
| DIN 7527-3-1971 |
钢锻件.自由锻造的圆环的加工余量及允许偏差 |
(Steel Forgings; Machining Allowances and Permissble Variations for Seamless Open-die Forged Rings) |
| DIN 7527-4-1972 |
钢锻件.自由锻造的套筒的加工余量及允许偏差 |
(Steel Forgings; Machining Allowances and Permissible Variations for Seamless Open-die Forged Bushes) |
| DIN 7527-5-1972 |
钢锻件.自由锻造的滚压及焊接圆环的加工余量及允许偏差 |
(Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Rolled and Welded Rings) |
| DIN 7527-6-1975 |
钢锻件.自由锻造的棒件的加工余量及允许偏差 |
(Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Bars) |
| DIN 75302-1991 |
轿车的顶部载荷粱.安全技术要求.检验 |
(Roof racks for passenger cars; requirements and testing) |
| DIN 7540-1980 |
环钩.质量等级5 |
(Eye hooks, grade 5) |
| DIN 75400-1980 |
汽车安全带的闭锁装置 |
(Seat belt buckles in motor vehicles) |
| DIN 75405-1980 |
轿车用灭火器架.要求.检验 |
(Fixtures for fire extinguishers in passenger cars; requirements, tests) |
| DIN 75406-1982 |
轿车中急救材料的装置.要求.检验 |
(Fixtures for first aid material in passenger cars; requirements, test) |
| DIN 75407-1986 |
轿车内的报警器三角架.要求.检验 |
(Fixtures for advance warning triangle in passenger cars; requirements, tests) |
| DIN 7541-1984 |
起重设备.质量等级5.大眼环钩 |
(Lifting appliances; large-eye hooks; grade 5) |
| DIN 75410-1-2003 |
载货车的安全性.第1部分:最大载重量为3.5吨的商用运货车的紧固点.最低要求 |
(Securing of cargo road vehicles - Part 1: Lashing points on commercial vehicles for goods transportation up to a total mass of 3,5 t; Minimum requirements) |
| DIN 75410-2-1995 |
道路车辆装货保险装置.第2部分:小客车.沿途零担货车、客货两用车和多用途客车的装货保险装置 |
(Securing of cargo in road vehicles - Part 2: Securing of cargo in passenger cars, station wagons and multi-purpose passenger cars) |
| DIN 75410-2-2005 |
道路车辆中货物的固定.第2部分:乘用车、客货两用车和多用途乘用车中货物的固定 |
|
| DIN 75410-3-1996 |
道路车辆装货保险装置.第3部分:箱式汽车装货保险装置 |
(Securing of cargo in road vehicles - Part 3: Securing of cargo in cargo minivans) |
| DIN 75410-3-2004 |
道路车辆上货物的固定.第3部分:旅行货车中货物的固定 |
|
| DIN 75490-1993 |
汽车用无线电设备.安装位置.一般要求 |
(Radio communication devices in motor vehicles; installation space, general requirements) |
| DIN 75501-1987 |
汽车的仪表板和测量仪器 |
(Instrument panel-measuring instruments for motor vehicles; built-in diameters) |
| DIN 75521-1-1992 |
摩托车前灯上装的里程速度表 |
(Speedometer headlamp mounting for motorcycles) |
| DIN 75521-2-1992 |
汽车仪表板上装的里程速度表 |
(Speedometer instrument panel mounting for motor vehicles) |
| DIN 75532-1-1976 |
旋转运动的传递.与齿轮连接的型式.中间齿轮.挠性驱动轴与装置 |
(Transmission of rotary motions; Types of connection to gears, intermediate gears, flexible drive shafts and equipment) |
| DIN 75532-2-1979 |
旋转运动的传递.挠性驱动轴 |
(Transmission of rotary motions; Flexible drive shafts) |
| DIN 75551-1988 |
汽车的压力计 |
(Pressure gauges for automobiles) |
| DIN 75553-1992 |
压力传感器 |
(Pressure sensor) |
| DIN 75554-1992 |
压力表 |
(Pressure gauges) |
| DIN 75575-1992 |
汽车用遥测温度计 |
(Temperatur gauges for motor vehicles) |
| DIN 7584-1980 |
家用安装水管配件.压力为10巴的平密封垫带外螺纹的钢管头 |
(Water-fittings for house installation; steal tube nozzles with external thread, flat sealing up to working pressure of 10 bar) |
| DIN 7585-1980 |
家用安装水管配件.压力为10巴的平密封软管口 |
(Water-fittings for house installation; sleeves, flat sealing up to work pressure of 10 bar) |
| DIN 7591-1981 |
家用安装水管配件.最大允许压力到10巴的两端用软管连接的带密封螺接头 |
(Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10) |
| DIN 7592-1981 |
家用安装水管配件.铜管流咀.公称压力10 |
(Water-fittings for house installation; copper tube nozzles up to working pressure of 10 bar) |
| DIN 7593-1981 |
家用安装水管配件.最大工作压力为10巴以下的两端用铜管连接的带密封螺旋连接 |
(Water fittings for domestic installation; Screwed unions with gasket for connection to copper tube on either side, designed for nominal pressure 10) |
| DIN 76-1-1983 |
螺纹尾部.按DIN13的ISO米制螺纹的螺纹退刀槽 |
(Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN 13) |
| DIN 76-1-2004 |
符合DIN 13-1的ISO米制螺纹的螺纹尾部和螺纹切槽 |
|
| DIN 76-2-1984 |
按DINISO228第1部分管螺纹的螺纹尾部和螺纹底切 |
(Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1) |
| DIN 76-3-1977 |
梯形螺纹.锯齿螺纹和圆形螺纹及其他粗牙螺纹的螺纹尾部和螺纹退刀槽 |
(Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch) |
| DIN 7601-1998 |
带球形衬套的管螺纹连接.全螺纹连接和概述 |
(Compression couplings with ball-type nipples - Complete unions and survey) |
| DIN 76024-1984 |
汽车的手动底部杠杆.安全技术要求.检验 |
(Manual operated jacks for motor vehicles, safety requirements and tests) |
| DIN 7603-2001 |
密封环 |
(Sealing rings) |
| DIN 76031-1979 |
救助汽车用的钢丝绳 |
(Steel wire ropes for road vehicle salvage) |
| DIN 76032-1979 |
救助汽车用的钢丝绳嵌环 |
(Thimbles for steel wire ropes for road vehicle salvage) |
| DIN 76033-1993 |
轿车的牵引钢丝绳.要求、检验、监督 |
(Tow ropes for passenger cars; requirements, testing, inspection) |
| DIN 7604-1992 |
六角头螺旋塞.轻载圆柱螺纹 |
(Hexagon head screw plugs; light type, cylindrical thread) |
| DIN 76051-1-1992 |
汽车和挂车的调整楔 |
(Wheel chocks for motor vehicles and trailers) |
| DIN 76051-2-1976 |
农用车辆的调整键.工作尺寸 |
(Wheel chocks for agricultural vehicles; functional dimensions) |
| DIN 76060-1983 |
载重汽车上悬臂设备用的加固板 |
(Fitting sheets for front mounted implements on commercial vehicles) |
| DIN 762-1-1992 |
连续输送机用经过校正和检验的链环节距为5d的2级圆钢链 |
(Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 5d) |
| DIN 762-2-1992 |
连续输送机用经过校正和检验的链环节距为5d的3级圆钢链 |
(Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 5d) |
| DIN 763-1990 |
不按量规检验的长环节圆钢链 |
(Tested, non-calibrated, long-link round steel chains) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com