标准号 |
中文名称 |
英文名称 |
DIN EN 13087-7 Berichtigung 1-2002 |
DINEN13087-7:2000-09的勘误 |
(Corrigenda to DIN EN 13087-7:2000-9; German version EN 13087-7:2000/A1:2001) |
DIN EN 13087-7-2000 |
防护头盔.试验方法.第7部分:耐火性 |
(Protective helmets - Test methods - Part 7: Flame resistance; German version EN 13087-7:2000) |
DIN EN 13087-8-2001 |
防护头盔.试验方法.第8部分:电性能 |
(Protective helmets - Test methods - Part 8: Electrical properties; German version EN 13087-8:2000) |
DIN EN 13088-2001 |
填充羽毛和绒毛的物品.测定填充产品的总重量和填充物重量的方法 |
(Manufactured articles filled with feather and down - Method for the determination of a filled product`s total mass and for the determination of the mass of the filling; German version EN 13088:2001) |
DIN EN 13089-1999 |
登山设备.登冰器具.安全技术要求和检验方法 |
(Mountaineering equipment - Ice-tools - Safety requirements and test methods; German version EN 13089:1999) |
DIN EN 1309-1-1997 |
圆木和锯木.尺寸测量方法.第1部分:锯木 |
(Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber; German version EN 1309-1:1997) |
DIN EN 13090-2001 |
建筑物燃气管道工程的螺纹接头再密封的方法 |
(Means for resealing threaded joints of gas pipework in buildings; German version EN 13090:2000) |
DIN EN 130900-1998 |
分规范.固定式聚苯乙烯薄膜绝缘的金属箔直流电容器 |
(Sectional specification - Fixed polystyrene film dielectric metal foil d.c. capacitors; German version EN 130900:1997) |
DIN EN 130901-1998 |
空白详细规范.固定式聚苯乙烯薄膜绝缘的金属箔直流电容器.评定级E |
(Blank detail specification - Fixed polystyrene film dielectric metal foil d.c. capacitors - Assessment level E; German version EN 130901:1997) |
DIN EN 130902-1998 |
空白详细规范.固定式聚苯乙烯薄膜绝缘的金属箔直流电容器.评定级EZ |
(Blank detail specification - Fixed polystyrene film dielectric metal foil d.c. capacitors - Assessment level EZ; German version EN 130902:1997) |
DIN EN 13091-2000 |
生物技术.过滤件和过滤组件的性能标准 |
(Biotechnology - Performance criteria for filter elements and filtration assemblies; German version EN 13091:1999) |
DIN EN 13092-2000 |
生物技术.设备.抽样和接种法指南 |
(Biotechnology - Equipment - Guidance on sampling and inoculation procedures; German version EN 13092:1999) |
DIN EN 13094-2004 |
危险货物运输用容器.工作压力不超过0.5巴的金属容器.设计和建造 |
|
DIN EN 13095-2000 |
生物技术.排气系统性能标准 |
(Biotechnology - Performance criteria for off-gas systems; German version EN 13095:1999) |
DIN EN 13096-2004 |
可运输储气瓶.填充气体到容器内的条件.单组分气体 |
|
DIN EN 13098-2001 |
工作场所的空气.空气中微生物和内毒素的测定导则 |
(Workplace atmospheres - Guidelines for measurement of airborne microorganisms and endotoxin; German version EN 13098:2000) |
DIN EN 13099-2004 |
可运输储气瓶.填充气体混合物到容器内的条件 |
|
DIN EN 131-1-1993 |
梯子.名称、型式、功能尺寸 |
(Ladders; terms, types, functional sizes; German version EN 131-1:1993) |
DIN EN 131-2-1993 |
梯子.要求、检验、标识 |
(Ladders; requirements, testing, marking; German version EN 131-2:1993) |
DIN EN 1310-1997 |
圆木和锯木.特性测定法 |
(Round and sawn timber - Method of measurement of features; German version EN 1310:1997) |
DIN EN 13100-1-2000 |
热塑性半成品焊接接头的无损检验.第1部分:外观检验 |
(Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination; German version EN 13100-1:1999) |
DIN EN 13100-2-2005 |
热塑性半成品焊接接头的无损检验.第2部分:X射线照相检验 |
|
DIN EN 13100-3-2005 |
热塑性半成品焊接接头的无损检验.第3部分:超声检验 |
|
DIN EN 13101-2003 |
地下人入口处阶梯.要求、标记、试验和合格评定 |
(Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity; German version EN 13101:2002) |
DIN EN 13103 Berichtigung 1-2003 |
DINEN13103-2002的技术勘误 |
(Corrigenda to DIN EN 13103:2002-02) |
DIN EN 13103-2002 |
铁路设施.轮副和行车机构.非动力轴.设计方法 |
(Railway applications - Wheelsets and bogies - Non-powered axles; Design method; German version EN 13103:2001) |
DIN EN 13104 Berichtigung 1-2003 |
DINEN13104-2002的技术勘误 |
(Corrigenda to DIN EN 13104:2002-02) |
DIN EN 13104-2002 |
铁路设施.轮副和行车机构.动力轴.设计方法 |
(Railway applications - Wheelsets and bogies - Powered axles; Design method; German version EN 13104:2001) |
DIN EN 13107-2005 |
载人用索道装置的安全要求.土木工程建筑 |
|
DIN EN 13109-2003 |
液化石油气罐.处置 |
(LPG tanks - Disposal; German version EN 13109:2002) |
DIN EN 1311-1997 |
圆木和锯木.病虫害侵袭测定法 |
(Round and sawn timber - Method of measurement of biological degrade; German version EN 1311:1997) |
DIN EN 13110-2003 |
液化石油气用(LPG)可运输可填充焊接铝瓶.设计和结构 |
(Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction; German version EN 13110:2002) |
DIN EN 13111-2001 |
防水用软板.非连续式屋顶和墙壁用衬垫.防水渗透性的测定 |
(Flexible sheets for waterproofing - Underlays for discontinuous roofing and wals - Determination of resistance to water penetration; German version EN 13111:2001) |
DIN EN 13112-2003 |
制革机.片皮机和带式刀剪切机的安全要求 |
(Tannery machines - Splitting and bandknife shearing machines - Safety requirements; German version EN 13112:2002) |
DIN EN 13113-2003 |
制革机.胶滚涂层机的安全要求 |
(Tannery machines - Roller coating machines - Safety requirements; German version EN 13113:2002) |
DIN EN 13114-2003 |
制革机.旋转加工器具的安全要求 |
(Tannery machines - Rotating process vessels - Safety requirements; German version EN 13114:2002) |
DIN EN 13115-2001 |
窗.机械特性的分类.压,扭和操纵力 |
(Windows - Classification of mechanical properties - Racking, torsion and operating forces; German version EN 13115:2001) |
DIN EN 13116-2001 |
幕墙.对风负载的抗性.性能要求 |
(Curtain walling - Resistance to wind load - Performance requirements; German version EN 13116:2001) |
DIN EN 13117-1-2000 |
运输包装.可重复使用的刚性塑料配送箱.第1部分:通用配送箱 |
(Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application; German version EN 13117-1:2000) |
DIN EN 13117-2-2000 |
运输包装.可重复使用的刚性塑料配送箱.第2部分:试验的通用规范 |
(Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing; German version EN 13117-2:2000) |
DIN EN 13118-2001 |
农业机械.马铃薯收获设备.安全性 |
(Agricultural machinery - Potatoes harvesting equipment - Safety; German version EN 13118:2000) |
DIN EN 1312-1997 |
圆木材和板木材.板木材的批量体积测定 |
(Round and sawn timber - Determination of the batch volume of sawn timber; German version EN 1312:1997) |
DIN EN 13120-2004 |
内用百页窗.包括安全的性能要求 |
|
DIN EN 131200-2002 |
分规范.具有金属化电极和聚丙烯介质的固定式电容器 |
(Sectional Specification - Fixed capacitors with metallized electrodes and polypropylene dielectric; German version EN 131200:2002) |
DIN EN 131201-2002 |
空白详细规范.具有金属化电极和聚丙烯介质的固定式电容器 |
(Blank detail specification - Fixed capacitors with metallized electrodes and polypropylene dielectric; German version EN 131201:2002) |
DIN EN 13121-2-2004 |
地上用GRP槽罐和容器.第2部分:复合材料.耐化学性 |
(GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance; German version EN 13121-2:2003) |
DIN EN 13121-2-2004 |
地上用GRP槽罐和容器.第2部分:复合材料.耐化学性 |
|
DIN EN 13123-1-2001 |
门窗和遮板.防爆.要求和分类.第1部分:冲击管 |
(Windows, doors and shutters - Explosion resistance; Requirements and classification - Part 1: Shock tube; German version EN 13123-1:2001) |
DIN EN 13123-2-2004 |
门窗和遮板.防爆.要求和分类.第2部分:范围试验 |
|
DIN EN 13124-1-2001 |
门窗和遮板.防爆.试验方法.第1部分:冲击管 |
(Windows, doors and shutters - Explosion resistance; Test method - Part 1: Shock tube; German version EN 13124-1:2001) |
DIN EN 13124-2-2004 |
门窗和遮板.防爆.要求和分类.第2部分:范围试验 |
|
DIN EN 13125-2001 |
遮板和遮帘.补充的耐热性.产品透气率等级的规定 |
(Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product; German version EN 13125:2001) |
DIN EN 13128-2001 |
机床工具的安全.安全.铣床(包括镗孔机) |
(Safety of machine tools - Safety - Milling machines (including boring machines); German version EN 13128:2001) |
DIN EN 13129-1-2003 |
铁路设施.主干线铁路车辆的空气调节.第1部分:舒适度参数 |
(Railway applications - Air conditioning for main line rolling stock - Part 1: Comfort parameters; German version EN 13129-1:2002) |
DIN EN 13129-2-2004 |
铁路设施.主干线铁路车辆的空气调节.第2部分:类型试验 |
|
DIN EN 1313-1-1999 |
圆木材和板木材.允许偏差和优选尺寸.第1部份:针叶木板材 |
(Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber (including Amendment A1:1999); German version EN 1313-1:1997 + A1:1999) |
DIN EN 1313-2-1999 |
圆木材和板木材.允许偏差和优选尺寸.第2部份:阔叶木板材 |
(Round and sawn timber - Permitted deviations and preferred sizes - Part 2: Hardwood sawn timber; German version EN 1313-2:1998) |
DIN EN 13130-1-2004 |
接触食品的材料和物品.受限制的塑料物质.第1部分:从塑料到食品和食品模拟物的特定迁移的试验方法指南以及塑料中物质的测定和食品模拟物所处条件的选择 |
|
DIN EN 13130-2-2004 |
接触食品的材料和物品.受限制的塑料物质.第2部分:食品模拟物中对苯二酸含量的测定 |
|
DIN EN 13130-3-2004 |
接触食品的材料和物品.受限制的塑料物质.第3部分:食品和食品模拟物中丙烯腈含量的测定 |
|
DIN EN 13130-4-2004 |
接触食品的材料和物品.受限制的塑料物质.第4部分:塑料中1,3-丁二烯含量的测定 |
|
DIN EN 13130-5-2004 |
接触食品的材料和物品.受限制的塑料物质.第5部分:食品模拟物中1,1-二氯乙烯含量的测定 |
|
DIN EN 13130-6-2004 |
接触食品的材料和物品.受限制的塑料物质.第6部分:塑料中1,1-二氯乙烯含量的测定 |
|
DIN EN 13130-7-2004 |
接触食品的材料和物品.受限制的塑料物质.第7部分:食品模拟物中单乙二醇和二甘醇含量的测定 |
|
DIN EN 13130-8-2004 |
接触食品的材料和物品.受限制的塑料物质.第8部分:塑料中异氰酸酯含量的测定 |
|
DIN EN 13131-2000 |
液化石油产品.镍和钒含量的测定.原子吸收分光光度测定法 |
(Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method; German version EN 13131:2000) |
DIN EN 13132-2002 |
液体石油制品.无铅汽油.用柱转换气相色谱法测定有机氧化合物和有机键合氧含量 |
(Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching; German version EN 13132:2000) |
DIN EN 13133-2000 |
铜焊.钎焊工认可 |
(Brazing - Brazer approval; German version EN 13133:2000) |
DIN EN 13134-2000 |
铜焊.程序认可 |
(Brazing - Procedure approval; German version EN 13134:2000) |
DIN EN 13135-1-2004 |
起重机.安全.设计.设备要求.第1部分:电工设备 |
|
DIN EN 13135-2-2005 |
起重机.设备.第2部分:非电工设备 |
|
DIN EN 13136-2001 |
制冷系统和热泵.压力释放装置和相关管.计算方法.德文版本EN13136-2001 |
(Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation; German version EN 13136:2001) |
DIN EN 13136-2005 |
制冷系统和热泵.释压装置和相关管道.计算方法 |
|
DIN EN 13137-2001 |
废弃物的特征记述.废弃物、淤泥和沉积物中有机碳总量(TOC)的测定 |
(Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments; German version EN 13137:2001) |
DIN EN 13138-1-2003 |
教授游泳用浮力辅助设备.第1部分:可穿戴的浮力辅助设备的安全要求和试验方法 |
(Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn; German version EN 13138-1:2003) |
DIN EN 13138-2-2003 |
学习游泳用浮力辅助设备.第2部分:浮力辅助设备的安全要求和试验方法 |
(Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held; German version EN 13138-2:2002) |
DIN EN 13139 Berichtigung 1-2004 |
对DIN EN 13139-2002的勘误 |
|
DIN EN 13139-2002 |
灰浆集料 |
(Aggregates for mortar; German version EN 13139:2002) |
DIN EN 13140-2001 |
农业机械.糖用甜菜和饲料用甜菜收割设备.安全性 |
(Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety; German version EN 13140:2000) |
DIN EN 13141-1-2004 |
建筑物的通风.住宅通风用组件/产品的性能试验.第1部分:外部和内部安装的空气传送设备 |
|
DIN EN 13141-2-2004 |
建筑物的通风.住宅通风用组件/产品的性能试验.第2部分:排气和供气终端装置 |
|
DIN EN 13141-3-2004 |
建筑物的通风.住宅通风用组件/产品的性能试验.第3部分:住宅用排油烟机 |
|
DIN EN 13141-4-2004 |
建筑物的通风.住宅用通风组件/产品的性能试验.第4部分:住宅通风系统中使用的风扇 |
|
DIN EN 13141-5-2005 |
建筑物通风.住宅通风用部件/产品的性能检验.通道和屋顶出口终端装置 |
|
DIN EN 13141-6-2004 |
建筑物的通风.住宅用通风组件/产品的性能试验.第6部分:独院住宅用排气通风系统封壳 |
|
DIN EN 13141-7-2004 |
建筑物的通风.住宅通风用组件/产品的性能试验.第7部分:独户住宅机械通风系统用机械供气和排气通风装置(包括热回收)的性能检验 |
|
DIN EN 13142-2004 |
建筑物的通风.住宅用通风组件/产品.必须和可选的性能特征 |
|
DIN EN 13143-2003 |
金属和其他无机涂层.孔隙率.孔隙测试的定义和约定 |
(Metallic and other inorganic coatings - Porosity - Definitions and conventions of the testing of pores; German version EN 13143:2003) |
DIN EN 13144-2003 |
金属和其他无机涂层.用抗拉试验定量测量粘着性的方法 |
(Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test; German version EN 13144:2003) |
DIN EN 13145-2001 |
铁路应用.轨道.枕木和障碍物 |
(Railway applications - Track - Wood sleepers and bearers; German version EN 13145:2001) |
DIN EN 13146-1-2003 |
铁路设施.轨道.紧固系统的试验方法.第1部分:纵向轨道固定装置的测定 |
(Railway applications - Track; Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint; German version EN 13146-1:2002) |
DIN EN 13146-2-2003 |
铁路设施.轨道.紧固系统的试验方法.第2部分:扭转阻力的测定 |
(Railway applications - Track; Test methods for fastening systems - Part 2: Determination of torsional resistance; German version EN 13146-2:2002) |
DIN EN 13146-3-2003 |
铁路设施.轨道.紧固系统的试验方法.第3部分:冲击荷载衰减的测定 |
(Railway applications - Track; Test methods for fastening systems - Part 3: Determination of attenuation of impact loads; German version EN 13146-3:2002) |
DIN EN 13146-4-2003 |
铁路设施.轨道.紧固系统的试验方法.第4部分:重复荷载效应 |
(Railway applications - Track; Test methods for fastening systems - Part 4: Effect of repeated loading; German version EN 13146-4:2002) |
DIN EN 13146-5-2003 |
铁路设施.轨道.紧固系统的试验方法.第5部分:电阻测定 |
(Railway applications - Track; Test methods for fastening systems - Part 5: Determination of electrical resistance; German version EN 13146-5:2002) |
DIN EN 13146-6-2002 |
铁路设施.轨道.紧固系统的试验方法.第6部分:艰苦环境条件的影响 |
(Railway applications - Track; Test methods for fastening systems - Part 6: Effect of severe environmental conditions; German version EN 13146-6:2002) |
DIN EN 13146-7-2003 |
铁路设施.轨道.紧固系统的试验方法.第7部分:定位力测定 |
(Railway applications - Track - Test methods for fastening systems - Part 7: Determination of clamping force; German version EN 13146-7:2002) |
DIN EN 13146-8-2002 |
铁路设施.轨道.紧固系统试验方法.第8部分:使用中测试 |
(Railway applications; Track - Test methods for fastening systems - Part 8: In service testing; German version EN 13146-8:2002) |
DIN EN 13147-2001 |
铜和铜合金.带材镗孔区域残留应力的测定 |
(Copper and copper alloys - Determination of residual stresses in the border areas of slit strip; German version EN 13147:2001) |
DIN EN 13148-2002 |
铜及铜合金.热浸镀锡带 |
(Copper and copper alloys - Hot-dip tinned strip; German version EN 13148:2001) |
DIN EN 13149-1-2004 |
公共交通.道路车辆调度和控制系统.第1部分:车上数据传输的WORLDFIP定义和应用规则 |
|
DIN EN 13149-2-2004 |
公共交通.道路车辆调度和控制系统.第2部分:WORLDFIP布线规范 |
|
DIN EN 13149-4-2005 |
公共交通.道路车辆调度和控制系统.第4部分:CANopen传输总线的一般应用规则 |
|
DIN EN 13149-5-2005 |
公共交通.道路车辆调度和控制系统.第5部分:CANopen布线规范 |
|
DIN EN 1315-1-1997 |
尺寸分类.第1部份:落叶圆木 |
(Dimensional classification - Part 1: Hardwood round timber; German version EN 1315-1:1997) |
DIN EN 1315-2-1997 |
尺寸分类.第2部份:针叶圆木 |
(Dimensional classification - Part 2: Softwood round timber; German version EN 1315-2:1997) |
DIN EN 13150-2001 |
实验室工作凳.安全要求和试验方法 |
(Workbenches for laboratories - Safety requirements and test methods; German version EN 13150:2001) |
DIN EN 13152-2002 |
自闭合式LPG气瓶阀规范和试验 |
(Specification and testing of LPG cylinder valves, self closing; German version EN 13152:2001) |
DIN EN 13153-2002 |
手工操作的LPG气瓶阀规范和试验 |
(Specification and testing of LPG cylinder valves - Manually operated; German version EN 13153:2001) |
DIN EN 13155-2004 |
起重机.非固定式荷载提升附属装置 |
(Cranes - Non-fixed load lifting attachments; German version EN 13155:2003) |
DIN EN 13155-2004 |
起重机.非固定式荷载提升附属装置 |
|
DIN EN 13157-2004 |
起重机.安全.手动提升设备 |
|
DIN EN 13158-2000 |
防护服.骑马者身体和肩的保护物和防护夹克.要求和试验方法 |
(Protective clothing - Protective jackets, body and shoulder protectors for horse riders - Requirements and test methods; German version EN 13158:2000) |
DIN EN 1316-1-1997 |
落叶圆木.质量分类.第1部分:橡树和山毛榉 |
(Hardwood round timber - Qualitative classification - Part 1: Oak and beech; German version EN 1316-1:1997) |
DIN EN 1316-2-1997 |
落叶圆木.质量分类.第2部分:杨树 |
(Hardwood round timber - Qualitative classification - Part 2: Poplar; German version EN 1316-2:1997) |
DIN EN 1316-3-1997 |
饮用水处理用产品.三钾磷酸盐 |
(Hardwood round timber - Qualitative classification - Part 3: Ash and maples and sycamore; German version EN 1316-3:1997) |
DIN EN 13160-1-2003 |
检漏系统.第1部分:一般原则 |
(Leak detection systems - Part 1: General principles; German version EN 13160-1:2003) |
DIN EN 13160-2-2003 |
检漏系统.第2部分:压力和真空系统 |
(Leak detection systems - Part 2: Pressure and vacuum systems; German version EN 13160-2:2003) |
DIN EN 13160-5-2004 |
检漏系统.第5部分:液面计检漏系统 |
|
DIN EN 13160-7-2003 |
检漏系统.第7部分:填缝隙、防漏衬和防漏套的一般要求和试验方法 |
(Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets; German version EN 13160-7:2003) |