标准号 |
中文名称 |
英文名称 |
| DIN 20501-1988 |
矿山铁路.钢轨S30.平面连接板FI30 |
(Pit railways; rails S 30, butt strap Fl 30) |
| DIN 20506-1990 |
钢支座上轨道固定用夹板 |
(Clamping plates for securing rails onto steel supports) |
| DIN 20536-1992 |
带弹性尖轨的单式道岔.半径120m.坡度1:9.轨距900mm.组装 |
(Simple track points with spring switch blade; 120 m radius, 1:9 inclination, 900 mm gauge; compilation) |
| DIN 20537-1992 |
简易道岔用转辙器.半径120m.坡度1:9.轨距900mm |
(Switches for simple track points; 120 m radius, 1:9 inclination, 900 mm gauge) |
| DIN 20538-1992 |
简易矿用道岔心.半径120m.斜度1:9.轨距900mm |
(Simple crossing for simple track points; 120 m radius, 1:9 inclination, 900 mm gauge) |
| DIN 20539-1992 |
简易道岔护轮轨装置.半径120m.坡度1:9.轨距900mm |
(Check rail device for simple track points; 120 m radius, 1:9 inclination, 900 mm gauge) |
| DIN 20548-1990 |
地下矿用有轨车辆的轮对.测量准则 |
(Wheel sets for rail vehicles used in mines; rules for measuring) |
| DIN 20549-1986 |
矿山铁路用轨距尺.概念与允许偏差 |
(Track gauges for pit railways; definition and tolerances) |
| DIN 20550-1990 |
小矿车.装配.主要尺寸.型式 |
(Mine cars size small; components, main dimensions, design) |
| DIN 20551-1990 |
矿车.正面板.车帮板及车架 |
(Mine cars; front wall, casing, frame, buffer sheet) |
| DIN 20552-1988 |
小型输送车.减震器.支承梁 |
(Small size lubs; bumpers, supporting beam) |
| DIN 20553-1989 |
矿车用不带弹簧的锥形滚珠轴承轮对 |
(Wheel sets with taper roller bearings for mine cars; without springs) |
| DIN 20555-1989 |
输送车用圆锥形滚珠轴承轮对.外部弹簧结构 |
(Wheel sets with taper roller bearings for mine cars; exterior spring suspension) |
| DIN 20556-1989 |
输送车用圆锥形滚珠轴承轮对.内部弹簧结构 |
(Wheel sets with taper roller bearings for mine cars; interior spring suspension) |
| DIN 20560-1989 |
中型运输矿车.尺寸.结构 |
(Mine cars; middle size; dimensions, design and construction) |
| DIN 20570-1989 |
大型运输矿车.尺寸.结构 |
(Mine cars; large size; dimensions, design and construction) |
| DIN 20575-1-1991 |
轨道运输.地下采矿用载人车.要求 |
(Rail transport; passenger cars for underground mining; specifications) |
| DIN 20579-1-1986 |
矿车用缓冲弹簧.计算 |
(Buffer springs for mine cars; calculation) |
| DIN 20579-2-1986 |
矿车用缓冲弹簧.要求 |
(Buffer springs for mine cars; requirements) |
| DIN 20581-1988 |
矿车.片状离合器 |
(Mine cars; strap type coupling) |
| DIN 20586-1991 |
铺设在木质轨枕上的S30和S33钢轨用矿山区钢轨固定件 |
(Rail fastenings in mining for S 30 and S 33 rails on wooden sleepers) |
| DIN 20590-1990 |
采矿用底盘上的紧固装置 |
(Securing devices on underframes used in mining) |
| DIN 20592-1-1991 |
矿山用单轨架空轨道.运输容器.尺寸和要求 |
(Suspended monorails for mining; transport boxes; dimensions and requirements) |
| DIN 20592-2-1991 |
矿山用单轨架空轨道.运输容器用制动装置.尺寸和要求 |
(Suspended monorails for mining; attachment facilities for transport boxes; dimensions and requirements) |
| DIN 20593-1-2002 |
采矿用单轨轨道.轨道.第1部分:I140E外形直轨 |
(Monorails for mining - Rails - Part 1: Straight rails for profile I 140 E) |
| DIN 20593-2-2002 |
采矿用单轨轨道.轨道.第2部分:用I140E直轨改装的弯曲轨道 |
(Monorails for mining - Rails - Part 2: Curved rails, adapting rails for profile I 140 E) |
| DIN 20593-3-2004 |
矿山用单轨架空轨道.轨道.第3部分:I 140 V 和 I 250外形的直轨和轨道连接装置 |
|
| DIN 20594-1991 |
重力30KN以下矿山用悬吊爪.要求和检验 |
(Suspension claws for mining, for loads up to 30 kN; requirements and testing) |
| DIN 20597-1992 |
矿山用单轨架空道.锯齿盘 |
(Suspended monorails for mining; toothed disc) |
| DIN 20599-1993 |
矿山用单轨架空索道.缆绳位置.滑轮平台架.行走机构净空间隙 |
(Suspended monorails for mining; rope positions, mounting devices, clearance dimensions for bogies) |
| DIN 206-1996 |
手用铰刀 |
(Hand reamers) |
| DIN 20600 Bb.1-1991 |
井下轨道运输.机车和车辆车轮的截面.截面B车轮用简单道岔.结构实例 |
(Mine railways; wheel profils for locomotives and cars; example of simple track point for the wheel profile B) |
| DIN 20600-1991 |
井下轨道运输.机车和车辆车轮截面 |
(Mine railways; wheel profils for locomotives and cars) |
| DIN 20601-1991 |
井下轨道运输.机车车轮的轮箍 |
(Mine cars; tyres for mine locomotives) |
| DIN 20609-1993 |
矿山机车照明.探照灯.设计特点.光度要求.仪表和测量 |
(Lighting of mine locomotives; head lamps; design features, photometric requirements, meters and measurements) |
| DIN 20610-1994 |
矿山机车照明,侧灯,设计特点,光技术要求 |
(Lighting of mine locomotives; position lamps; design features, photometric requirements) |
| DIN 20619-1993 |
矿山用单轨架空道.带悬架的卷绳滚筒.尺寸和要求 |
(Suspended monorails for mining; winding-drum with suspension hook; dimensions and requirements) |
| DIN 20620-1-1994 |
地下矿用强制导轨.第1部分:概述.分类和概念 |
(Force-guided tram-ways in mining - Part 1: Survey; structure and terms) |
| DIN 20620-2-1994 |
地下矿用强制导轨.第2部分:悬挂单轨起重机.分类和概念 |
(Force-guided tram-ways in mining - Part 2: Monorails; structure and terms) |
| DIN 20620-3-1994 |
地下矿用强制导轨.第3部分:运输导轨.分类和概念 |
(Force-guided tram-ways in mining - Part 3: Free-steered machines; structure and terms) |
| DIN 20622-2002 |
矿山用单轨架空道.轨道悬挂和它的支座用轨道连接140E/76.截面1140E型轨道的允许悬挂负荷Suspended-monorail |
(Suspended-monorail transport systems for mining - Permissible loads for suspensions and their abnutments and railprofile I 140 E) |
| DIN 20625-1-1992 |
矿山用轨道约束运输装置.绳索牵引和自行式轨道装置用螺栓联轴器.螺栓联轴器30 |
(Capture-track rail installations in mining; bolted couplings for rope-hauled and self-propelled rail installations; bolted coupling 30) |
| DIN 20629-1-2001 |
矿山用单轨架空道.安装规则.第1部分:钢索传动式单轨架空道 |
(Suspended monorails for mining - Mounting regulations - Part 1: for cable-driven suspended monorails) |
| DIN 20629-2-2001 |
矿山用单轨架空道.安装规则.第2部分:机车传动式单轨架空道 |
(Suspended monorails for mining - Mounting regulations - Part 2: for loco-driven suspended monorails) |
| DIN 20629-3-2001 |
矿山用单轨架空道.安装规则.第3部分:计算 |
(Suspended monorails for mining - Mounting regulations - Part 3: Calculations) |
| DIN 20633-2002 |
矿山用单轨架空道.两端带叉形松紧螺纹扣 |
(Overhead monorail installations for mining - Double-end fork turnbuckles) |
| DIN 20635-2001 |
矿山用单轨架空道.悬挂用钩环 |
(Monorails for mining - Suspensions shackles) |
| DIN 20636-2001 |
矿山用单轨架.悬挂爪.要求和检验 |
(Monorails for mining - Suspension claws - Requirements and testing) |
| DIN 20637-1997 |
矿山用单轨架空道.经检验长链节架空圆钢链 |
(Monorails for mining - Tested round steel chains for suspensions - Tested, long link) |
| DIN 2077-1979 |
圆形热轧弹簧钢.尺寸.允许尺寸和形状偏差 |
(Spring Steel, Round, Hot Rolled; Dimensions, Permissible Deviations on Dimension and Form) |
| DIN 2079-1987 |
机床.锥度7:24的轴头 |
(7/24 tapers for spindle noses for machine tools) |
| DIN 208-1981 |
莫氏锥柄机用铰刀 |
(Machine chucking reamers with Morse taper shanks) |
| DIN 2080-1-1978 |
工具和夹具用锥轴.A型 |
(7/24 Taper Shanks for Tools and Clamping Devices, Type A) |
| DIN 2080-2-1979 |
工具和夹具用锥轴.B型 |
(7/24 shanks for tools and clamping devices, form B) |
| DIN 2082-1-1979 |
铣刀杆用螺母 |
(Nuts for Milling Machine Arbors) |
| DIN 2082-2-1964 |
滚铣刀杆用螺母 |
(Nuts for Hob Arbors) |
| DIN 2083-1-1980 |
纵槽铣刀杆用套筒 |
(Bearing Sleeves for Milling Machine Arbors, for Milling Cutters with Longitudinal Keyway) |
| DIN 2083-2-1964 |
圆柱滚铣刀杆用套筒 |
(Bearing Sleeves for Hob Arbors; Parallel Type) |
| DIN 2084-1-1979 |
纵槽铣刀杆用环 |
(Spacing collars for milling machine arbors) |
| DIN 2084-2-1964 |
纵槽滚铣刀杆用环 |
(Spacer Collars for Hob Arbors for Hobs with Longitudinal Keyway) |
| DIN 2084-3-1964 |
横槽滚铣刀杆用环刀 |
(Spacer Collars for Hob Arbors for Hobs with Transverse Slot) |
| DIN 2085-1980 |
带斜锥铣刀杆用环组 |
(Sets of spacer collars for milling machine arbors with 7/24 taper) |
| DIN 2086-2-1964 |
纵槽滚铣刀杆 |
(Hob Arbors for Hobs with Longitudinal Keyway) |
| DIN 2086-3-1964 |
横槽滚铣刀杆 |
(Hob arbors for hobs with clutch drive) |
| DIN 209-1979 |
带入刀头式机用铰刀 |
(Machine Reamers with Screwed-on Blades) |
| DIN 2090-1971 |
扁钢制圆柱形螺旋压缩弹簧.计算 |
(Helical Compression Springs made of Flat Bar Steel; Calculation) |
| DIN 2091-1981 |
圆截面扭杆弹簧.计算与设计 |
(Circular section torsion bar springs; Calculation and design) |
| DIN 2092-1992 |
盘形弹簧.计算 |
(Disc springs; calculation) |
| DIN 2093-1992 |
盘形弹簧.尺寸.质量要求 |
(Disc springs; dimensions and quality specifications) |
| DIN 2094-1996 |
道路车辆用板簧.要求.检验 |
(Road vehicles leaf springs - Requirements, testing) |
| DIN 2095-1973 |
圆线材制圆柱形螺旋弹簧.冷绕压缩弹簧的质量细则 |
(Helical Springs Made of Round Wire; Quality Specifications for Cold Coiled Compression Springs) |
| DIN 2096-1-1981 |
圆线材及棒材制圆柱形螺旋压簧.热绕压缩弹簧的质量要求 |
(Helical compression springs made of round wire and rod; Quality requirements for hot formed compression springs) |
| DIN 2096-2-1979 |
圆棒材制圆柱形螺旋压簧.大批量生产质量要求 |
(Cylindrical Coil Compression Springs Made from Round Rods; Quality Requirements for Mass Production) |
| DIN 2097-1973 |
圆线材制圆柱形螺旋弹簧.绕冷抗拉弹簧的质量规程 |
(Helical Springs Made of Round Wire; Quality Specifications for Cold Coiled Tension Springs) |
| DIN 2098-1-1968 |
圆线材制圆柱形螺旋弹簧.线材直径0.5MM以上的冷绕压缩弹簧的结构尺寸 |
(Helical springs Made of Round Wire; Dimensions for Cold Coiled Compression Springs with Wire Diameter from 0.5 mm upwards) |
| DIN 2098-2-1970 |
圆线材制圆柱形螺旋弹簧.线材直径0.5MM以下的冷绕压缩弹簧的结构尺寸 |
(Helical Springs Made of Round Wire; Dimensions for Cold-coiled compression springs of less than 0.5 mm Wire Diameter) |
| DIN 2099-1-2003 |
圆线材及棒材制螺旋弹簧.第1部分:冷成形压缩弹簧所需的信息.表格A |
(Helical springs made of round wire and rod - Part 1: Information to be given in order to obtain the cold formed compression spring required; Printed form A) |
| DIN 2099-2-1973 |
圆线材制圆柱形螺旋弹簧.拉伸弹簧数据.印样 |
(Helical Springs Made of Round Wire; Data for Tension Springs; Printed Form) |
| DIN 2099-2-2004 |
圆线材和棒材制螺旋弹簧.第2部分:获取所需的冷成型拉伸弹簧而给出的信息.印制格式B |
|
| DIN 2099-3-2004 |
圆线材及棒材制螺旋弹簧.第3部分:热成形压缩弹簧要求的信息.印样C |
|
| DIN 2103-1993 |
办公技术和数据技术.色带.织物打字带 |
(Office machines; inked ribbons; woven fabric ribbons) |
| DIN 2107-1986 |
办公技术和数据技术.文字处理机的字符系统 |
(Office machines; character families for textpreparation equipment) |
| DIN 2108-1-1993 |
办公机械.打字机.概念和分类 |
(Office machines; typewriters; concepts and classification) |
| DIN 2108-2-1993 |
办公机械.打字机.规定信息的最低限度要求 |
(Office machines; typewriters; minimum information to be specified) |
| DIN 21151-1990 |
矿井建造.扁钢丝绳盘.安全技术要求和检验 |
(Shaft sinking; pulleys for flat winding ropes; safety requirements and testing) |
| DIN 21164-2003 |
打竖井.提升吊桶用导向架.安全技术要求和试验 |
(Shaft sinking - Riders for winding kibbles - Safety requirements and testing) |
| DIN 21181-1993 |
矿井建造.出碴料斗 |
(Shaft sinking; debris kibbles) |
| DIN 21186-1994 |
矿井,矿井中负载运输用吊车,安全技术要求和检验 |
(Shaft sinking; rope suspension gears for load hoisting in shafts; safety requirements and testing) |
| DIN 21187-1994 |
矿井,矿井中负载运输用吊链,安全技术要求和检验 |
(Shaft sinking; chain suspension gears for load hoisting in shafts; safety requirements and testing) |
| DIN 21194-1999 |
打竖井.导向钢丝绳用支撑.安全技术要求和试验 |
(Shaft sinking - Abutment for guide ropes - Safety requirements and testing) |
| DIN 21198-1990 |
矿井建造.竖井测锤 |
(Shaft sinking; shaft plumbs) |
| DIN 212-1-1979 |
直柄机用铰刀 |
(Machine reamers with parallel shank, continuous shanks) |
| DIN 212-2-1981 |
带直柄的机用铰刀.多级刀柄 |
(Machine reamers with parallel shanks; stepped shanks) |
| DIN 21252-1992 |
升降用钢丝绳.升降用扁钢丝绳 |
(Winding ropes; flat winding ropes) |
| DIN 21254-10-1991 |
提升用钢丝绳.单层圆股钢丝绳.结构等级6×35 |
(Winding ropes; single layer round strand ropes; class 635) |
| DIN 21254-11-1991 |
提升用钢丝绳.单层圆股钢丝绳.结构等级7×36 |
(Winding ropes; single layer round strand ropes; class 736) |
| DIN 21254-12-1991 |
提升用钢丝绳.单层圆股钢丝绳.结构等级7×35 |
(Winding ropes; single layer round strand ropes, class 735) |
| DIN 21254-13-1991 |
提升用钢丝绳.单层圆股钢丝绳.结构等级8×36 |
(Winding ropes; single layer round strand ropes; class 836) |
| DIN 21254-14-1991 |
提升用钢丝绳.单层圆股钢丝绳.结构等级8×35 |
(Winding ropes; single layer round strand ropes; class 835) |
| DIN 21254-15-1992 |
升降用钢丝绳.双层圆股钢丝绳.结构等级18×7 |
(Winding ropes; two layer round strand ropes; class 187) |
| DIN 21254-16-1992 |
升降用钢丝绳.三层圆股钢丝绳.结构等级36×7 |
(Winding ropes; three layer round strand ropes; class 367) |
| DIN 21254-17-1992 |
升降用钢丝绳.双层扁股钢丝绳.结构等级10×10 |
(Winding ropes; two layer flat strand ropes; class 1010) |
| DIN 21254-18-1992 |
升降用钢丝绳.三层扁股钢丝绳.结构等级19×12 |
(Winding ropes; three layer flat strand ropes; class 1912) |
| DIN 21254-19-1992 |
升降用钢丝绳.三层扁股钢丝绳.结构等级19×26 |
(Winding ropes; three layer flat strand ropes; class 1926) |
| DIN 21254-5-1991 |
提升用钢丝绳.单层圆股钢丝绳.结构等级6×19K |
(Winding ropes; single layer round strand ropes; class 619K) |
| DIN 21254-6-1991 |
提升用钢丝绳.单层圆股钢丝绳.结构等级6×19 |
(Windig ropes; single layer round strand ropes; class 619) |
| DIN 21254-7-1991 |
提升用钢丝绳.单层圆股钢丝绳.结构等级7×19 |
(Winding ropes; single layer round strand ropes; class 719) |
| DIN 21254-8-1991 |
提升用钢丝绳.单层圆股钢丝绳.结构等级6×37 |
(Winding ropes; single layer round strand ropes; class 637K) |
| DIN 21254-9-1991 |
提升用钢丝绳.单层圆股钢丝绳.结构等级6×36 |
(Winding ropes; single layer round strand ropes; class 636) |
| DIN 21256-1992 |
扁平平衡钢丝绳 |
Flat balance ropes |
| DIN 21258-1986 |
采矿用传动皮带轮牵引钢丝绳用防锈剂.技术安全要求和检验 |
Preservative compounds for Koepe friction drive winding ropes in mining; safety requirements and testing |
| DIN 2128-1-1994 |
办公技术和数据技术.色带.取下式一次性使用的C型碳黑色带和覆盖式一次性使用的P型碳黑色带 |
(Office machines; inked ribbons; single strike ribbons-C for lift off and single strike ribbons-P for cover up) |
| DIN 2128-3-1994 |
办公技术和数据技术.色带.多次性使用的黑碳打字带 |
Office machines; inked ribbons; multistrike ribbons |
| DIN 2129-1986 |
办公技术和数据技术.打字机的纸导向装置.尺寸.操作部件 |
Typewriters; paper carrier; dimensions, controls |
| DIN 21315-1989 |
矿山圆坑木.支柱和顶盖承荷能力.计算 |
Round pit timber; load bearing capacity of props and bars; calculation |
| DIN 21316-1987 |
矿山圆坑木.支柱.顶盖 |
Round pit timber; props, bars |
| DIN 21317-1987 |
矿山圆坑木.杆.圆木的小头 |
Round pit timber; timber for lagging |
| DIN 21318-1989 |
矿山圆坑木.桩木 |
Round pit timber; pillar, supports |
| DIN 21319-1989 |
矿山圆坑木.螺栓 |
Round pit timber; bolts |
| DIN 21320-1987 |
矿山圆坑木.技术质量条件和交货条件 |
Round pit timber; technical quality and delivery requirements |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com