标准号 |
中文名称 |
英文名称 |
DIN EN 14173-2002 |
结构粘合剂.挠性粘合组件的T-剥离试验 |
(Structural adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:1993, modified); German version EN 14173:2002) |
DIN EN 14175-1-2003 |
通风柜.第1部分:词汇 |
(Fume cupboards - Part 1: Vocabulary; German version EN 14175-1:2003) |
DIN EN 14175-2-2003 |
通风柜.第2部分:安全和性能要求 |
(Fume cupboards - Part 2: Safety and performance requirements; German version EN 14175-2:2003) |
DIN EN 14175-3-2004 |
通风柜.第3部分:定型试验方法 |
|
DIN EN 14175-4-2004 |
通风柜.第4部分:现场试验方法 |
|
DIN EN 14176-2004 |
食品.用HPLC法测定贻贝中的软骨藻酸 |
|
DIN EN 14177-2004 |
食品.澄清和浑浊苹果汁和果泥中棒曲霉素的测定.液体/液体分溶提纯的高效液相色谱法(HPLC) |
|
DIN EN 14178-1-2005 |
建筑物用玻璃.基本碱土硅酸盐玻璃制品.第1部分:浮法玻璃 |
|
DIN EN 14178-2-2005 |
建筑物用玻璃.基本碱土硅酸盐玻璃制品.第2部分:合格评价/产品标准 |
|
DIN EN 1418-1998 |
焊接人员.金属材料全机械焊接和自动焊接用电阻焊设备以及熔焊焊接设备操作员的检验 |
(Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials; German version EN 1418:1997) |
DIN EN 14181-2004 |
固定源辐射.自动测量系统的质量保证 |
|
DIN EN 14182-2003 |
包装.术语.基本术语和定义 |
(Packaging - Terminology - Basic terms and definitions; German version EN 14182:2002) |
DIN EN 14183-2004 |
脚踏凳 |
|
DIN EN 14184-2004 |
水质.流水中大型水生植物调查用指南标准 |
(Water quality - Guidance standard for the surveying of aquatic macrophytes in running waters; German version EN 14184:2003) |
DIN EN 14184-2004 |
水质.流水中大型水生植物调查用指南标准 |
|
DIN EN 14185-1-2003 |
无脂肪食品.N-氨基甲酸甲酯残留物的测定.第1部分:带SPE净化的高效液相色谱法 |
(Non-fatty foods - Determination of N-methylcarbamate residues - Part 1: HPLC-method with SPE clean-up; German version EN 14185-1:2003) |
DIN EN 14187-1-2003 |
冷用密封胶.第1部分:硬化速度测定的试验方法 |
(Cold applied joint sealants - Part 1: Test method for the determination of rate of cure; German version EN 14187-1:2003) |
DIN EN 14187-2-2003 |
冷用密封胶.第2部分:指触干时间测定的试验方法 |
(Cold applied joint sealants - Part 2: Test method for the determination of tack free time; German version EN 14187-2:2003) |
DIN EN 14187-3-2003 |
冷用密封胶.第3部分:自动找平特性测定的试验方法 |
(Cold applied joint sealants - Part 3: Test method for the determination of self-levelling properties; German version EN 14187-3:2003) |
DIN EN 14187-4-2003 |
冷用密封胶.第4部分:浸入到试验燃料后质量和体积变化测定的试验方法 |
(Cold applied joint sealants - Part 4: Test methods for the determination of the change in mass and volume after immersion in test fuel; German version EN 14187-4:2003) |
DIN EN 14187-5-2003 |
冷用密封胶.第5部分:测定耐水解作用的试验方法 |
(Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis; German version EN 14187-5:2003) |
DIN EN 14187-6-2003 |
冷用密封胶.第6部分:浸入到化学液后粘着性/凝聚性测定的试验方法 |
(Cold applied joint sealants - Part 6: Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids; German version EN 14187-6:2003) |
DIN EN 14187-7-2003 |
冷用密封胶.第7部分:耐火性测定的试验方法 |
(Cold applied joint sealants - Part 7: Test method for the determination of the resistance to flame; German version EN 14187-7:2003) |
DIN EN 14187-8-2003 |
冷用密封胶.第8部分:用紫外线辐射法进行人工风化的测定的试验方法 |
(Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation; German version EN 14187-8:2003) |
DIN EN 14188-1-2004 |
接缝填充物和密封胶.第1部分:热用密封胶的规范 |
|
DIN EN 14189-2003 |
可运输储气瓶.储气瓶定期检查时气瓶阀的检查和维修 |
(Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders; German version EN 14189:2003) |
DIN EN 14190-2005 |
再加工生成的石膏板产品.定义、要求和试验方法 |
|
DIN EN 14195-2005 |
石膏灰泥板系统用金属框架部件.定义、要求和试验方法 |
|
DIN EN 14195-2005 |
石膏灰泥板系统用金属框架部件.定义、要求和试验方法 |
|
DIN EN 14196-2004 |
土工合成物.粘土土工合成隔板单位面积质量测量的试验方法 |
(Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers; German version EN 14196:2003) |
DIN EN 14196-2004 |
土工合成物.粘土土工合成隔板单位面积质量测量的试验方法 |
|
DIN EN 14197-2-2004 |
低温容器.静压非真空绝热容器.第2部分:设计、生产、检查和试验 |
(Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 14197-2:2003) |
DIN EN 14197-2-2004 |
低温容器.静压非真空绝热容器.第2部分:设计、生产、检查和试验 |
|
DIN EN 14197-3-2004 |
低温容器.静压非真空绝热容器.第3部分:操作要求 |
|
DIN EN 14197-3-2005 |
低温容器.静压非真空绝热容器.第3部分:操作要求 |
|
DIN EN 14199-2005 |
专业土工工作的实行.小型桩 |
|
DIN EN 14199-2005 |
专业土工工作的实行.小型桩 |
|
DIN EN 142-2002 |
呼吸防护装置.口罩组件.要求、检验和标记 |
(Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking; German version EN 142:2002) |
DIN EN 1420-1-1999 |
有机物对饮用水的影响.管道系统中水气味和味道的测定 |
(Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1: Test method; German version EN 1420-1:1999) |
DIN EN 14200-2004 |
铁路设施.悬挂组件.钢制抛物线形弹簧 |
|
DIN EN 14201-2004 |
遮帘和百叶窗.耐反复操作性(机械耐久性).试验方法 |
|
DIN EN 14202-2004 |
遮帘和百页窗.管状和方形遮帘和百页窗机械化使用的适用性.要求和试验方法 |
|
DIN EN 14203-2004 |
遮帘和百叶窗.带手摇曲柄的齿轮使用能力.要求和试验方法 |
|
DIN EN 14204-2004 |
化学抗菌剂和防腐剂.评价兽医领域用化学抗菌剂和防腐剂的分枝杆菌科活性的定量悬浮试验.试验方法和要求(阶段2,步骤1) |
|
DIN EN 14205-2004 |
天然石材的试验方法.努氏硬度的测定 |
(Natural stone test methods - Determination of Knoop hardness; German version EN 14205:2003) |
DIN EN 14205-2004 |
天然石材的试验方法.努氏硬度的测定 |
|
DIN EN 14206-2003 |
内河航行运载工具.客轮通道.要求和类型 |
(Inland navigation vessels - Gangways for passenger vessels - Requirements, types; German version EN 14206:2003) |
DIN EN 14208-2004 |
可运输气瓶.气体运输用容量在1000升及以下的焊接压力鼓形物的规范 |
|
DIN EN 1421-1996 |
饮用水净化用化学制品.氯化铵 |
(Chemicals used for treatment of water intended for human consumption - Ammonium chloride; German version EN 1421:1996) |
DIN EN 1421-2005 |
人类生活用水处理用化学品.氯化铵 |
|
DIN EN 14210-2004 |
表面活性剂.用U形或环形法测定表面活性剂溶液的界面张力 |
|
DIN EN 14211-2005 |
环境空气质量.利用化学发光测量二氧化氮和一氧化二氮浓度的标准方法 |
|
DIN EN 14212-2005 |
环境空气质量.利用紫外线荧光测量二氧化硫浓度的标准方法 |
|
DIN EN 14213 Berichtigung 1-2004 |
DINEN14213-2003的技术勘误 |
(Corrigenda to DIN EN 14213:2003-11) |
DIN EN 14213 Berichtigung 1-2004 |
DIN EN 14213-2003的技术勘误 |
|
DIN EN 14214 Berichtigung 1-2004 |
对DIN EN 14214-2003的勘误 |
|
DIN EN 14215-2003 |
铺地织物.机织绒头地毯和走廊地毯的分类 |
(Textile floor coverings - Classification of machine-made pile rugs and runners; German version EN 14215:2003) |
DIN EN 14216-2004 |
水泥.超低热特种水泥的组分、规范和合格准则 |
|
DIN EN 14218-2003 |
六角法兰面螺母.细牙螺纹 |
(Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified); German version EN 14218:2003) |
DIN EN 14219-2003 |
米制细牙螺纹六角法兰面螺栓.小系列 |
(Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified); German version EN 14219:2003) |
DIN EN 1422-1997 |
医用灭菌器.环氧乙烷灭菌器.要求和检验方法 |
(Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods; German version EN 1422:1997) |
DIN EN 14222-2003 |
不锈钢外壳的锅炉 |
(Stainless steel shell boilers; German version EN 14222:2003) |
DIN EN 14227-1-2004 |
液力粘结混合物.规范.第1部分:水泥粘结粒状混合物 |
|
DIN EN 14227-2-2004 |
液力粘合混合料.规范.第2部分:矿渣粘合混合料 |
|
DIN EN 14227-3-2004 |
液力粘结混合物.规范.第3部分:飞灰粘结混合物 |
|
DIN EN 14227-4-2004 |
液力粘结混合物.规范.第3部分:液力粘结混合物用飞灰 |
|
DIN EN 14227-5-2004 |
液力粘结混合物.规范.第5部分:液力道路粘合剂粘结混合物 |
|
DIN EN 1423-1997 |
街道标记材料.标记滴落剂.作标记的玻璃料滴,防滑剂和混合剂 |
(Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two; German version EN 1423:1997) |
DIN EN 14231-2003 |
天然石料试验方法.用摆动测试仪测定防滑性能 |
(Natural stone test methods - Determination of the slip resistance by means of the pendulum tester; German version EN 14231:2003) |
DIN EN 14233-2003 |
接触食品的材料和物品.塑料.为了选择迁移测试的适当温度,测定在微波炉或普通炉加热过程中塑料和食品接触时 |
(Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature fo |
DIN EN 14238-2004 |
起重机.手工控制加载操作设备 |
|
DIN EN 14239-2004 |
建筑物通风.管道系统.管道系统表面积的测量 |
|
DIN EN 1424-2003 |
道路路标用材料.预混玻璃料滴 |
(Road marking materials - Premix glass beads (includes Amendment A1:2003); German version EN 1424:1997 + A1:2003) |
DIN EN 14240-2004 |
建筑物通风.冷凝天花板.试验和等级 |
|
DIN EN 14241-1-2005 |
烟囱.弹性密封件和弹性密封剂.材料要求和试验方法.第1部分:烟道内衬密封 |
|
DIN EN 14242-2004 |
铝和铝合金.化学分析.电感耦合等离子体光学发射光谱分析 |
|
DIN EN 1425-1999 |
沥青和沥青粘合剂.感知性的特征 |
(Bitumen and bituminous binders - Characterization of perceptible properties; German version EN 1425:1999) |
DIN EN 14250-2005 |
木制结构.装配有穿孔金属板紧固件的预制结构构件的生产要求 |
|
DIN EN 14251-2004 |
结构圆木.试验方法 |
|
DIN EN 14253-2004 |
机械振动.当整个人体处于振动中时对健康影响的测量和计算.实施指南 |
(Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance; German version EN 14253:2003) |
DIN EN 14253-2004 |
机械振动.当整个人体处于振动中时对健康影响的测量和计算.实施指南 |
|
DIN EN 14254-2004 |
体外诊断医疗装置.收集来自于人体的试样(血液除外)用一次性容器 |
|
DIN EN 14255-1-2005 |
非相干光辐射下个人辐照量的测量和评估.第1部分:工作地点内人工光源发出的紫外线辐射 |
|
DIN EN 14258-2005 |
结构胶粘剂.短期和长期暴露在特定温度条件下的胶粘连接件的机械性能 |
|
DIN EN 14259-2004 |
地板覆盖物的粘结剂.机械和电性能要求 |
|
DIN EN 1426-1999 |
沥青和沥青粘合剂.针入度的测定 |
(Bitumen and bituminous binders - Determination of needle penetration; German version EN 1426:1999) |
DIN EN 14267-2004 |
灌溉技术.灌溉给水栓 |
|
DIN EN 1427-1999 |
沥青和沥青粘合剂.软化点的测定.圆环法和压球法 |
(Bitumen and bituminous binders - Determination of the softening point - Ring and ball method; German version EN 1427:1999) |
DIN EN 14274-2004 |
机动车燃料.汽油和柴油质量评估.燃料质量监测系统 |
|
DIN EN 14278-1-2004 |
纺织品.棉纤维黏性的测定.第1部分:使用手工热检测设备的方法 |
|
DIN EN 14278-2-2004 |
纺织品.棉纤维黏性的测定.第2部分:使用自动热检波板设备的方法 |
|
DIN EN 14278-3-2004 |
纺织品.棉纤维黏性的测定.第3部分:使用自动热检波旋转鼓设备的方法 |
|
DIN EN 1428-1999 |
沥青和沥青粘合剂.沥青乳液中水含量的测定.共沸蒸馏法 |
(Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method; German version EN 1428:1999) |
DIN EN 14286-2004 |
铝和铝合金.储存和运输危险货物的罐用可焊接轧制产品 |
|
DIN EN 14287-2004 |
铝和铝合金.生产包装和包装组件用产品的化学组分的特定要求 |
|
DIN EN 14288-2004 |
皮革.物理和机械试验.成雾特性的测定 |
|
DIN EN 14289-2004 |
皮革.物理和机械试验.水渗透压力的测定 |
|
DIN EN 1429-1999 |
沥青和沥青粘合剂.沥青乳液的筛余物和筛分存储稳定性的测定 |
(Bitumen and bituminous binders - Determination of residue on sieving of bitumen emulsions and determination of storage stability by sieving; German version EN 1429:1999) |
DIN EN 14290-2004 |
锌和锌合金.二次原料 |
|
DIN EN 14291-2005 |
燃气装置上检漏用发泡溶液 |
|
DIN EN 14294-2004 |
皮革和鞋靴材料用胶粘剂.通过制模工艺进行粘结试验件的制备 |
|
DIN EN 14295-2004 |
焊接消耗品.高强度钢埋弧焊用线状和管状芯电极和焊条熔剂合成物.分类 |
(Welding consumables - Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification; German version EN 14295:2003) |
DIN EN 14295-2004 |
焊接消耗品.高强度钢埋弧焊用线状和管状芯电极和焊条熔剂合成物.分类 |
|
DIN EN 14297-2004 |
烟囱.烟囱产品的抗冻-融试验方法 |
|
DIN EN 14298-2005 |
锯材.干燥质量的评定 |
|
DIN EN 14299-2004 |
非活性外科植入物.心脏和血管植入物的特殊要求.动脉斯滕特固定模的特殊要求 |
|
DIN EN 143-2000 |
呼吸防护装置.微粒过滤器.要求、试验、标记 |
(Respiratory protective devices - Particle filters - Requirements, testing, marking; German version EN 143:2000) |
DIN EN 1430-1999 |
沥青和沥青粘合剂.沥青乳液颗粒极性的测定 |
(Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions; German version EN 1430:1999) |
DIN EN 143001-1997 |
空白详细规范.用负温度系数直接加热的热敏电阻(固态玻璃中的气泡或釉瓷) |
(Blank detail specification: Directly heated negative temperature coefficient thermistors (beads in solid glass or vitreous enamel); German version EN 143001:1991) |
DIN EN 143002-1997 |
空白详细规范.用负温度系数直接加热的热敏电阻(壳体中的气泡) |
(Blank detail specification: Directly heated negative temperature coefficient thermistors (beads in envelopes); German version EN 143002:1991) |
DIN EN 143003-1997 |
空白详细规范.用负温度系数直接加热的热敏电阻(移动板型) |
(Blank detail specification - Directly heated negative temperature coefficient thermistors (disk type); German version EN 143003:1991) |
DIN EN 143004-1997 |
空白详细规范.用负温度系数直接加热的热敏电阻(棒型) |
(Blank detail specification: Directly heated negative temperature coefficient thermistors (rod type); German version EN 143004:1991) |
DIN EN 1431-1999 |
沥青和沥青粘合剂.用蒸馏法测定沥青乳液产生的再生粘合剂和馏出物 |
(Bitumen and bituminous binders - Determination of recovered binder and oil distillate from bitumen emulsions by distillation; German version EN 1431:1999) |
DIN EN 14316-1-2004 |
建筑物的热绝缘产品.膨胀珍珠岩制品的现场热绝缘成形.第1部分:粘结和松填装产品的安装前规范 |
|
DIN EN 14317-1-2004 |
建筑物的热绝缘产品.片状蛭石产品的现场热绝缘成形.第1部分:粘结和松填装产品的安装前规范 |
|
DIN EN 1432-1997 |
交换容器.交换罐.尺寸,要求,检验方法,操作条件 |
(Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions; German version EN 1432:1997) |
DIN EN 14321-2-2005 |
建筑物玻璃.热钢化碱土硅酸盐安全玻璃.第2部分:合格评价/产品标准 |
|
DIN EN 14322-2004 |
木基板材.内部用三聚氰胺面板.定义、要求和分类 |
|
DIN EN 14323-2004 |
木基板材.内部用三聚氰胺面板.试验方法 |
|
DIN EN 14324-2004 |
钎焊.钎焊连接件的应用指南 |
|