标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 5508-1995 |
动植物脂肪和油.脂肪酸甲酯的气一液相色谱分析法 |
Animal and vegetable fats and oils - Analysis by gas chromatography of methyl esters (ISO 5508:1990); German version EN ISO 5508:1995 |
| DIN EN ISO 5509-2001 |
动物和植物脂肪和油.脂肪酸甲酯的制备(ISO 5509:2000) |
Animal and vegetable fats and oils - Preparation of methyl esters of fatty acids (ISO 5509:2000); German version EN ISO 5509:2000 |
| DIN EN ISO 5534-2004 |
干酪和融化干酪.总固形物含量的测定(参照法) |
|
| DIN EN ISO 5537-2004 |
奶粉.水含量的测定(参照法) |
|
| DIN EN ISO 5555-2002 |
动植物脂肪和油.取样 |
Animal and vegetable fats and oils - Sampling (ISO 5555:2001); German version EN ISO 5555:2001 |
| DIN EN ISO 5659-1-1999 |
塑料.烟雾产生.第1部分:检验光密度的导则 |
Plastics - Smoke generation - Part 1: Guidance on optical-density testing (ISO 5659-1:1996); German version EN ISO 5659-1:1999 |
| DIN EN ISO 5659-2-1998 |
塑料.烟雾产生.第2部分:用单箱试验法测定光密度 |
Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:1994, including Technical Corrigendum 1:1997); German version EN ISO 5659-2:1998 |
| DIN EN ISO 5667-13-1998 |
水质.取样.第13部分:从水处理及水制备设备中淤泥取样指引 |
Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water treatment works (ISO 5667-13:1997); German version EN ISO 5667-13:1997 |
| DIN EN ISO 5667-13-1998 |
水质.取样.第13部分:从水处理及水制备设备中淤泥取样指引 |
Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water treatment works (ISO 5667-13:1997); German version EN ISO 5667-13:1997 |
| DIN EN ISO 5667-16-1999 |
水质.取样.第16部分:取样和进行生物检验的方法的指南 |
Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:1998); German version EN ISO 5667-16:1998 |
| DIN EN ISO 5667-19-2004 |
水质.取样.第19部分:海底沉积物的抽样指南 |
|
| DIN EN ISO 5667-3-1996 |
水质.取样.第3部分:样品的封存和处理说明 |
Water quality, sampling - Part 3: Guidance on the preservation and handling of samples (ISO 5667-3:1994); German version EN ISO 5667-3:1995 |
| DIN EN ISO 5667-3-2004 |
水质.采样.第3部分:水样保存和处理方法指南 |
|
| DIN EN ISO 5674-2004 |
农林业用拖拉机和机械.动力输出轴护罩.强度和磨损试验及验收标准 |
|
| DIN EN ISO 5764-2002 |
牛奶.冰点的测定.热敏电阻冰点测定法(参考法) |
Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2002); German version EN ISO 5764:2002 |
| DIN EN ISO 5771-1996 |
输送无水氨用橡胶软管和软管组件.规范 |
Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:1994, including Corr 1:1995); German version EN ISO 5771:1996 |
| DIN EN ISO 5774-2000 |
压缩空气用织物增强塑料软管.规范 |
Plastics hoses, textile-reinforced, for compressed air - Specification (ISO 5774:1997); German version EN ISO 5774:2000 |
| DIN EN ISO 5778-2000 |
造船技术.防风雨的小型钢舱盖 |
Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998); German version EN ISO 5778:2000 |
| DIN EN ISO 580-2005 |
塑料管和管道系统.喷射铸造热塑性配件.热效应直观评估法 |
|
| DIN EN ISO 580-2005 |
塑料管和管道系统.喷射铸造热塑性配件.热效应直观评估法 |
|
| DIN EN ISO 5826-2003 |
电阻焊设备.变压器.适用于所有变压器的通用规范 |
(Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:1999); German version EN ISO 5826:2003) |
| DIN EN ISO 5828-2001 |
电阻焊设备.连接水冷耳的接线柱用的辅助连接电缆.尺寸和特征 |
Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001); German version EN ISO 5828:2001 |
| DIN EN ISO 583-1-2000 |
带有织物胎壳的传送带.覆盖物的厚度和总厚度.第1部分:试验方法 |
Conveyor belts with a textile carcass - Total thickness and thickness of covers of elements - Part 1: Method of test (ISO 583-1:1999); German version EN ISO 583-1:1999 |
| DIN EN ISO 584-1998 |
塑料.未饱和的聚酯树脂.80℃时的反应性测定(常规方法) |
Plastics - Unsaturated polyester resins - Determination of reactivity at 80 C (conventional method) (ISO 584:1982); German version EN ISO 584:1997 |
| DIN EN ISO 585-2000 |
塑料.不增塑的乙酸纤维素.含水量的测定 |
Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990); German version EN ISO 585:1999 |
| DIN EN ISO 591-1-2001 |
涂料用二氧化钛颜料.第1部分:规范和试验方法 |
Titanium dioxide pigments for paints - Part 1: Specifications and methods of test (ISO 591-1:2000); German version EN ISO 591-1:2000 |
| DIN EN ISO 595-2-1994 |
医用可重复使用的全玻璃或金属-玻璃注射器.第2部分:设计.性能要求和试验 |
Reusable all-glass or metal-and-glass syringes for medical use - Part 2: Design, performance requirements and tests (ISO 595-2:1987); German version EN ISO 595-2:1994 |
| DIN EN ISO 5961-1995 |
水的质量.镉的测定.用火焰原子吸收光谱法测定镉 |
Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994); German version EN ISO 5961:1995 |
| DIN EN ISO 5981-1998 |
橡胶或塑料涂层的织物.抗复合弯曲剪切和磨损的测定 |
Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:1997); German version EN ISO 5981:1997 |
| DIN EN ISO 5983-1-2005 |
动物饲料.氮含量的测定和粗蛋白质的计算.第1部分:基尔达斯法 |
|
| DIN EN ISO 5983-2-2005 |
动物饲料.氮含量的测定和粗蛋白质的计算.第2部分:块分解/蒸汽蒸馏法 |
|
| DIN EN ISO 5999-2004 |
软质泡沫聚合材料.不包括地毯衬底的承重用聚氨基甲酸酯泡沫体.规范 |
|
| DIN EN ISO 60-2000 |
塑料.可由专用漏斗注入的材料表观密度的测定 |
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977); German version EN ISO 60:1999 |
| DIN EN ISO 6009-1994 |
一次性使用的皮下注射针.识别用色标 |
Hypodermic needles for single use - Colour coding for identification (ISO 6009:1992); German version EN ISO 6009:1994 |
| DIN EN ISO 604-1997 |
塑料.压缩性能的测定 |
Plastics - Determination of compressive properties (ISO 604:1993); German version EN ISO 604:1996 |
| DIN EN ISO 6042-2000 |
造船.防风雨的单扇钢门 |
Ships and marine technology - Weathertight single-leaf steel doors (ISO 6042:1998); German version EN ISO 6042:2000 |
| DIN EN ISO 61-2000 |
塑料.不能由专用漏斗注入的模压材料表观密度的测定 |
Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:1976); German version EN ISO 61:1999 |
| DIN EN ISO 6103-2000 |
粘合的磨料制品.验收试验可允许的磨轮不平衡 |
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Testing (ISO 6103:1999); German version EN ISO 6103:1999 |
| DIN EN ISO 6103-2005 |
粘合磨料产品.交货时砂轮的可允许不平衡性.静态试验 |
|
| DIN EN ISO 613-2002 |
船舶和航海技术.磁罗盘、罗盘座和方位读数装置.B级 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class B (ISO 613:2000); German version EN ISO 613:2001 |
| DIN EN ISO 6157-2-2004 |
紧固件.表面缺陷.第2部分:螺母 |
|
| DIN EN ISO 6158-2004 |
金属涂层.工程用铬电镀层 |
|
| DIN EN ISO 6165-2002 |
土方机械.基本类型.词汇 |
Earth-moving machinery - Basic types - Vocabulary (ISO 6165:2001); German version EN ISO 6165:2002 |
| DIN EN ISO 6179-2001 |
硫化或热塑橡胶.橡胶薄板和橡胶涂层织物.挥发性液体渗透速度的测定(重力测定技术) |
Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:1998); German version EN ISO 6179:2000 |
| DIN EN ISO 6185-1-2002 |
充气艇.第1部分:发动机最大额定功率为4.5kW的动力艇 |
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001); German version EN ISO 6185-1:2001 |
| DIN EN ISO 6185-2-2002 |
充气艇.第2部分:发动机最大额定功率为4.5kW到(并包括)15 kW的动力艇 |
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001); German version EN ISO 6185-2:2001 |
| DIN EN ISO 6185-3-2002 |
充气艇.第2部分:发动机最大额定功率为15kW及更大的动力艇 |
Inflatable boats - Part 3: Boats with a maximum motor power rating of 15 kW and greater (ISO 6185-3:2001); German version EN ISO 6185-3:2001 |
| DIN EN ISO 6186-1998 |
塑料.松散性测定 |
Plastics - Determination of pourability (ISO 6186:1998); German version EN ISO 6186:1998 |
| DIN EN ISO 62-1999 |
塑料.吸水性的测定 |
Plastics - Determination of water absorption (ISO 62:1999); German version EN ISO 62:1999 |
| DIN EN ISO 6222-1999 |
水质.可培养微生物的计数.通过对营养琼脂培养基培养的计群法 |
Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium (ISO 6222:1999); German version EN ISO 6222:1999 |
| DIN EN ISO 6224-1997 |
一般目的用水时使用的带织物加固内衬的橡胶软管.规范 |
(Plastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:1995); German version EN ISO 6224:1997) |
| DIN EN ISO 6245-2003 |
石油产品.灰分的测定 |
(Petroleum products - Determination of ash (ISO 6245:2001); German version EN ISO 6245:2002) |
| DIN EN ISO 6246-1998 |
石油产品.易挥发和中等蒸馏燃料的蒸发残渣.顶吹法 |
(Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995); German version EN ISO 6246:1996) |
| DIN EN ISO 6251-1998 |
液化石油气.对铜的腐蚀性.铜片试验 |
(Liquefied petroleum gases - Corrosiveness to copper - Copper strip test (ISO 6251:1996); German version EN ISO 6251:1998) |
| DIN EN ISO 6252-1998 |
塑料.环境应力破裂(ESC)测定.持久应力试验 |
(Plastics - Determination of environmental stress cracking (ESC) - Constant-tensile-stress method (ISO 6252:1992); German version EN ISO 6252:1997) |
| DIN EN ISO 6259-1-2002 |
热塑管.拉伸特性的测定.第1部分:通用试验方法 |
(Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:1997); German version EN ISO 6259-1:2001) |
| DIN EN ISO 6270-1-2002 |
涂料和清漆.耐湿度的测定.第1部分:连续冷凝作用 |
Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation (ISO 6270-1:1998); German version EN ISO 6270-1:2001 |
| DIN EN ISO 6272-1-2004 |
色漆和清漆.快速变形(耐冲击)试验.第1部分:大区域压头落锤试验 |
|
| DIN EN ISO 6272-1994 |
色漆和清漆.落锤试验 |
Paints and varnishes - Falling-weight test (ISO 6272:1993); German version EN ISO 6272:1994 |
| DIN EN ISO 6320-2000 |
动植物脂肪和油.折射指数的测定 |
Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2000); German version EN ISO 6320:2000 |
| DIN EN ISO 6321-2002 |
动植物脂肪和油.开口毛细管中熔点(裂解点)测定 |
Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point) (ISO 6321:2002); German version EN ISO 6321:2002 |
| DIN EN ISO 6326-3-1998 |
天燃气.硫化物的测定.第3部分:用电势分析法对硫化氢,硫醇式硫和硫化羰式硫的测定 |
Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989); German version EN ISO 6326-3:1997 |
| DIN EN ISO 6326-5-1998 |
天燃气.硫化物的测定.第5部分:林格聂尔(lingener)燃烧法 |
Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989); German version EN ISO 6326-5:1997 |
| DIN EN ISO 6330-2001 |
纺织品.织物试验的家庭洗涤和干燥程序 |
Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2000); German version EN ISO 6330:2000 |
| DIN EN ISO 6341-1996 |
水质.抑制大型Daphnia magna Straus(枝角目,甲壳纲)活动性的测定.剧毒试验 |
Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO 6341:1996); German version EN ISO 6341:1996 |
| DIN EN ISO 6346-1996 |
ISO集装箱.编码.识别和标记 |
Freight containers - Coding, identification and marking (ISO 6346:1995); German version EN ISO 6346:1995 |
| DIN EN ISO 6360-1-2004 |
牙医学.旋转器械的数字编码系统.第1部分:一般特点 |
|
| DIN EN ISO 6360-2-2005 |
牙科学.旋转器械用数字编码体系.第2部分:形状 |
|
| DIN EN ISO 6360-4-2004 |
牙科学.旋转器械数字编码体系.第4部分:金刚石器械的特性 |
|
| DIN EN ISO 6360-6-2004 |
牙科学.旋转器械数字编码体系.第6部分:磨削器械特性 |
|
| DIN EN ISO 6383-1-2004 |
塑料.薄膜和薄板.耐撕裂性的测定.第1部分:裤型撕裂法 |
|
| DIN EN ISO 6383-2-2004 |
塑料.薄膜和薄板.耐撕裂性的测定.第2部分:埃尔曼多法 |
|
| DIN EN ISO 6385-2004 |
工作系统设计的人类工效原则 |
|
| DIN EN ISO 6401-2005 |
塑料.氯乙烯均聚物和共聚物树脂.剩余氯乙烯单体的测定.气相色谱法 |
|
| DIN EN ISO 6402-1-2003 |
塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模制和挤压材料.第1部分:命名系统和规范基础 |
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification |
| DIN EN ISO 6402-2-1999 |
塑料.耐冲击丙烯腈/苯乙烯模制和挤压材料(ASA,AES,ACS),丁二烯改型材料除外.第2部分:试验试样的制备和特性的测定 |
Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:1994); German version EN ISO 640 |
| DIN EN ISO 6402-2-2004 |
塑料.丙烯腈-苯乙烯-丙烯酸酯(ASA)、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯(AEPDS)和丙烯腈-(氯化聚乙烯)-苯乙烯(ACS)模塑和挤塑材料.第2部分:试样制备和性能测定 |
|
| DIN EN ISO 6416-2005 |
水文测量.超声波(声波)法测量流量 |
|
| DIN EN ISO 642-2000 |
钢.端头淬硬性试验(乔米尼(Jominy)试验) |
Steel - Hardenability test by end quencing (Jominy test) (ISO 642:1999); German version EN ISO 642:1999 |
| DIN EN ISO 6427-1998 |
塑料.通过有机溶剂测定可萃取成份(标准法) |
Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:1992); German version EN ISO 6427:1998 |
| DIN EN ISO 643 Berichtigung 1-2004 |
DIN EN ISO 643-2003的勘误 |
|
| DIN EN ISO 643-2003 |
钢.表面粒度的缩微照相测定 |
(Steels - Micrographic determination of the apparent grain size (ISO 643:2003); German version EN ISO 643:2003) |
| DIN EN ISO 6468-1997 |
水质.选出的有机氯杀虫剂,多氯联苯和氯苯的测定.在液-液萃取后的气相色谱法 |
Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas-chromatographic method after liquid-liquid extraction (ISO 6468:1996); German version EN ISO 6468:1996 |
| DIN EN ISO 6497-2005 |
动物饲料.抽样 |
|
| DIN EN ISO 6497-2005 |
动物饲料.抽样 |
|
| DIN EN ISO 6497-2005 |
动物饲料.抽样 |
|
| DIN EN ISO 6506-1-1999 |
金属材料.布氏硬度试验.第1部分:试验方法 |
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:1999); German version EN ISO 6506-1:1999 |
| DIN EN ISO 6506-2 Bb.1-1999 |
金属材料.布氏硬度试验.第2部分:硬度试验机的校验.依据验证结果及为试验机与冲头设计所作修正 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of the hardness testing machines; recommendations according to the verification and for the design of the testing machine and the plunger |
| DIN EN ISO 6506-2-1999 |
金属材料.布氏硬度试验.第2部分:硬度试验机械的校准与标定 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of hardness testing machines (ISO 6506-2:1999); German version EN ISO 6506-2:1999 |
| DIN EN ISO 6506-3 Bb.1-1999 |
金属材料.布氏硬度试验.第3部分:标准试块校验.标准试块设计样品 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks; example of design of reference blocks |
| DIN EN ISO 6506-3-1999 |
金属材料.布氏硬度试验.第3部分:标准试块的校验 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:1999); German version EN ISO 6506-3:1999 |
| DIN EN ISO 6507-1-1998 |
金属材料.维氏硬度试验.第1部分:试验方法 |
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:1997); German version EN ISO 6507-1:1997 |
| DIN EN ISO 6507-2 Bb.1-1998 |
金属材料.维氏硬度检验.第2部分:试验机械检验.检验和试验机械结构的建议及打压印章 |
Metallic materials - Vickers hardness test - Part 2: Verification of the testing machines; recommendations according to the verification and for the performance of the testing machine and the plunger |
| DIN EN ISO 6507-2-1998 |
金属材料.维氏硬度试验.第2部分:试验机械的校准 |
Metallic materials - Vickers hardness test - Part 2: Verification of the testing machines (ISO 6507-2:1997); German version EN ISO 6507-2:1997 |
| DIN EN ISO 6507-3 Bb.1-1998 |
金属材料.维氏硬度检验.第3部分:硬度对比板的校准.使用硬度对比板举例 |
Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks; example of performance of the reference blocks |
| DIN EN ISO 6507-3-1998 |
金属材料.维氏硬度试验.第3部分:标准块的校准 |
Metallic materials - Vickers hardness test - Part 3: Calibration of the reference blocks (ISO 6507-3:1997); German version EN ISO 6507-3:1997 |
| DIN EN ISO 6508-1 Berichtigung 1-2000 |
DIN EN ISO 6508-1的技术勘误 |
Corrigendum to DIN EN ISO 6508-1:1999-10 |
| DIN EN ISO 6508-1-1999 |
金属材料.洛氏硬度试验(等级A、B、C、D、E、F、G、H、K、N、T).第1部分:试验方法 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 1: Test method (ISO 6508-1:1999); German version EN ISO 6508-1:1999 |
| DIN EN ISO 6508-2 Bb.1-1999 |
金属材料.洛氏硬度试验(等级A,B,C,D,E,F,G,H,K,N,T).第2部分:硬度试验机械的标定与校验.根据标定及为试验机械与冲头所作推荐 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 2: Verification and calibration of the hardness testing machines; recommendations according to the verification and for the design of the testing machine and the p |
| DIN EN ISO 6508-2-1999 |
金属材料.洛氏硬度试验(等级A,B,C,D,E,F,G,H,K,N,T).第2部分:试验机械的标定与校验 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 2: Verification and calibration of testing machines (ISO 6508-2:1999); German version EN ISO 6508-2:1999 |
| DIN EN ISO 6508-3 Bb.1-1999 |
金属材料.洛氏硬度试验(等级A,B,C,D,E,F,G,H,K,N,T).第3部分:标准块校验.标准块性能样品 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 3: Calibration of reference blocks; example of performance of the reference blocks |
| DIN EN ISO 6508-3-1999 |
金属材料.洛氏硬度试验(等级A,B,C,D,E,F,G,H,K,N,T).标准块校验 |
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 3: Calibration of reference blocks (ISO 6508-3:1999); German version EN ISO 6508-3:1999 |
| DIN EN ISO 6509-1995 |
金属和合金的腐蚀.黄铜耐脱锌性的测定 |
Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981); German version EN ISO 6509:1995 |
| DIN EN ISO 6520-1-1999 |
焊接及相关工艺.金属材料中几何的不均匀性分类.第1部分:熔焊 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:1998); Trilingual version EN ISO 6520-1:1998 |
| DIN EN ISO 6520-2-2002 |
焊接及相关工艺.金属材料中几何缺陷的分类.第2部分:压焊 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001); German version EN ISO 6520-2:2001 |
| DIN EN ISO 6529-2003 |
防护服.化学试剂防护.防护服面料液体和气体的渗透性测定 |
Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001); German version EN ISO 6529:2001 |
| DIN EN ISO 6530-2005 |
防护服装.对液态化学制品的防护.材料抗渗透性的试验方法 |
|
| DIN EN ISO 6530-2005 |
防护服装.对液态化学制品的防护.材料抗渗透性的试验方法 |
|
| DIN EN ISO 6551-1996 |
石油液体和气体.动态测量的正确可靠性.电脉冲数据和/或电子脉冲数据的电缆传输 |
Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982); German version EN ISO 6551:1995 |
| DIN EN ISO 6570-2004 |
天然气.烃液潜在含量的测定.重量分析法 |
|
| DIN EN ISO 6579-2003 |
食品和动物饲料的微生物学.测沙门氏菌用水平检测法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp. (ISO 6579:2002); German version EN ISO 6579:2002 |
| DIN EN ISO 658-2002 |
油料种子.杂质含量的测定 |
Oilseeds - Determination of content of impurities (ISO 658:2002); German version EN ISO 658:2002 |
| DIN EN ISO 659-1998 |
油籽.油含量测定(参照法) |
Oilseeds - Determination of oil content (Referenz method) (ISO 659:1998); German version EN ISO 659:1998 |
| DIN EN ISO 660-1999 |
动植物脂肪和油.酸值和酸度的测定 |
Animal and vegetable fats and oils - Determination of acid value and acidity (ISO 660:1996); German version EN ISO 660:1999 |
| DIN EN ISO 660-2005 |
动植物油脂.酸值和酸度的测定 |
|
| DIN EN ISO 6603-1-2000 |
塑料.硬质塑料耐冲击性能的测定.第1部分:非仪器操作的冲击试验 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000); German version EN ISO 6603-1:2000 |
| DIN EN ISO 6603-2-2002 |
塑料.硬质塑料击穿性能的测定.第2部分:仪器冲击试验 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000); German version EN ISO 6603-2:2000 |
| DIN EN ISO 661-1995 |
动植物脂肪和油.试样的制备 |
Animal and vegetable fats and oils - Preparation of test sample (ISO 661:1989); German version EN ISO 661:1995 |
| DIN EN ISO 661-2005 |
动植物油脂.试样的制备 |
|
| DIN EN ISO 662-2001 |
动物和植物油脂.水分和挥发物含量的测定 |
Animal and vegetable fats and oils - Determination of moisture and volatile matter content (ISO 662:1998); German version EN ISO 662:2000 |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com