标准号 |
中文名称 |
英文名称 |
DIN 58397-2-1983 |
精密机械光学仪器润滑脂的检验.摊铺特性 |
(Testing of lubricating greases for precision engineering and optical instruments; spreading) |
DIN 58400-1984 |
精密机械渐开线圆柱齿轮基准齿形 |
(Basic rack for involute teeth of cylindrical gears for fine mechanics) |
DIN 58405 Bb.1-1972 |
精密加工用正齿轮传动装置.计算表格 |
(Spur gear drives for fine mechanics; calculating sheet) |
DIN 58405-1-1972 |
精密加工用正齿轮传动装置.适用范围.概念.测定参数.分类 |
(Spur Gear Drives for Fine Mechanics; Scope, Definitions, Principal Design Data, Classification) |
DIN 58405-2-1972 |
精密加工用正齿轮传动装置.传动机构配合的选择.公差.偏差 |
(Spur Gear Drives for Fine Mechanics; Gear Fit Selection, Tolerances, Allowances) |
DIN 58405-3-1972 |
精密加工用正齿轮传动装置.图样上的数据.计算示例 |
(Spur Gear Drives for Fine Mechanics; Indication in Drawings, Examples for Calculation) |
DIN 58405-4-1972 |
精密加工用正齿轮传动装置.图表 |
(Spur Gear Drives for Fine Mechanics; Tables) |
DIN 58411-1987 |
精密加工装置正齿轮用滚刀.模数0.1至1mm |
(Hobs for cylindrical fine pitch gears with modul 0,1 up to 1 mm) |
DIN 58412-1987 |
精密机械齿轮刀具的基准齿形.根据德国工业标准DIN58400和DIN867的渐开线啮合 |
(Basic rack tooth profile for gear tools for fine mechanics; involute gears according DIN 58400 and DIN 867) |
DIN 58413-1987 |
精密加工装置滚刀的公差 |
(Tolerances for gear hobs for fine mechanics) |
DIN 58420-1981 |
检验精密机械上圆柱齿轮用的标准齿轮.齿轮毛坯及啮合 |
(Master gears for checking of spur gears for fine mechanics; gear blanks and gearing) |
DIN 58425-1-1980 |
精密机械的齿轮摆线啮合.概要.符号.名称 |
(Gears with round flanks for fine mechanics; survey, symbols, terms) |
DIN 58425-2-1980 |
精密机械的齿轮摆线啮合.齿形 |
(Gears with round flanks for fine mechanics; gear profile) |
DIN 58425-3-1980 |
精密机械的齿轮摆线啮合.轮和传动装置的计算与设计 |
(Gears with round flanks for fine mechanics; calculation and design of wheel and pignon) |
DIN 58425-4-1980 |
精密机械的齿轮摆线啮合.齿轮和传动的公差和允许偏差 |
(Gears with round flanks for fine mechanics; tolerances and permissible devations for wheel and pignon) |
DIN 58425-5-1980 |
精密机械的齿轮摆线啮合.齿轮刀具的齿廓 |
(Gears with round flanks for fine mechanics; gear tool profile) |
DIN 58425-6-1980 |
精密机械的齿轮摆线啮合.图样说明 |
(Gears with round flanks for fine mechanics; indication on drawings) |
DIN 58425-7-1980 |
精密机械的齿轮摆线啮合.图表 |
(Gears with round flanks for fine mechanics; tables, diagrams) |
DIN 58450-1972 |
半圆头带槽沉头螺钉.刻度螺钉 |
(Slotted flat mushroom head screw; scale-screw) |
DIN 58460-1978 |
精密机械用螺柱 |
(Studs for fine mechanics) |
DIN 58461-1978 |
精密机械用带颈柱螺柱 |
(Studs with rim for fine mechanics) |
DIN 58462-1978 |
精密机械用带槽螺柱 |
(Studs with groove for fine mechanics) |
DIN 58463-1978 |
精密机械用带颈和槽的螺柱 |
(Studs with rim and groove for fine mechanics) |
DIN 58464-1978 |
精密机械用有头螺柱 |
(Studs with head for fine mechanics) |
DIN 58466-1978 |
精密机械零件的标准尺寸表 |
(Table of standard dimensions for parts used in fine mechanics) |
DIN 58467-1977 |
精密机械用带肩衬套 |
(Bushes for fine mechanics with plain shoulder) |
DIN 58469-1978 |
精密机械用带螺纹柱螺栓 |
(Studs with thread for fine mechanics) |
DIN 58470-1978 |
精密机械用带六角头和螺纹的柱螺栓 |
(Studs with hexagon and thread for fine mechanics) |
DIN 58471-1978 |
精密机械用带六角头螺纹和槽的柱螺栓 |
(Studs with hexagon, thread and groove for fine mechanics) |
DIN 58472-1978 |
精密机械用带头和螺纹的柱螺栓 |
(Studs with head and thread for fine mechanics) |
DIN 58500-1974 |
绘图仪器名称.概念 |
(Nomenclature of drawing instruments) |
DIN 58502-1990 |
绘图仪器.要求.检验 |
(Drawing instruments; requirements, testing) |
DIN 58506-1994 |
精密绘图仪的分线规 |
(Dividers for precision drawing instruments (P)) |
DIN 58508-1994 |
精密绘图仪的弹簧弓式插脚分规 |
(Spring-bow divider for precision drawing instruments (P)) |
DIN 58509-1994 |
精密绘图仪的圆心固定圆规 |
(Fixed centre spring bow with interchangeable points for precision drawing instruments (P)) |
DIN 58510-1994 |
精密绘图仪的铅笔插头 |
(Pencil points for precision drawing instruments (P)) |
DIN 58511-1994 |
精密绘图仪的钢笔插头 |
(Pen points for precision drawing instruments (P)) |
DIN 58512-1994 |
精密绘图仪的分规插头 |
(Divider points for precision drawing instruments (P)) |
DIN 58513-1994 |
精密绘图仪的延长杆 |
(Lengthening bar for precision drawing instruments (P)) |
DIN 58515-1994 |
绘图仪器的画针 |
(Needles for drawing instruments) |
DIN 58516-1990 |
绘图仪器用定针 |
(Pivot needles for fixed center spring bow) |
DIN 58518-1994 |
精密绘图仪的鸭嘴笔 |
(Swivel nib pens for precision drawing instruments (P)) |
DIN 58519-1994 |
精密绘图仪的瑞典型鸭嘴笔 |
(Border pens for precision drawing instruments (P)) |
DIN 58520-1-1994 |
绘图仪器用的螺钉.T型螺栓 |
(Screws for drawing instruments; part 1: T-bolts) |
DIN 58520-2-1996 |
绘图仪用螺钉.第2部分:半沉头螺钉 |
(Bolts for drawing instruments - Part 2: Deep flat countersunk bolt) |
DIN 58521-1994 |
绘图仪器用滚花螺母 |
(Knurled nuts for drawing instruments) |
DIN 58522-1995 |
绘图仪用石墨碳素笔 |
(Leads for drawing instruments) |
DIN 58530-1995 |
绘图仪器用调整螺钉 |
(Adjusting screws for drawing instruments) |
DIN 58531-1995 |
绘图仪器用夹头螺杆 |
(Clamping screws for drawing instruments) |
DIN 58532-1995 |
绘图仪.大圆规用接长镶配脚 |
(Drawing instruments - Lengthening bar for big bow combination with interchangeable parts) |
DIN 58537-1972 |
绘图仪器.比例规 |
(Drawing instruments; proportional divider) |
DIN 58538-1982 |
绘图仪器大分度规及可拆装大分度规 |
(Drawing instruments; big bow pencil and big bow combination with interchangeable parts) |
DIN 58540-1996 |
学生用绘图仪的插入式圆规 |
(Compass with interchangeable points for standard drawing instruments) |
DIN 58541-1996 |
学生用绘图仪的分规 |
(Dividers for school drawing standard drawing instruments) |
DIN 58542-1996 |
学生用绘图仪的可逆分度规 |
(Reversible spring bow for standard drawing instruments) |
DIN 58543-1987 |
学生用绘图仪的分度规 |
(Spring bow divider for school drawing instruments) |
DIN 58544-1996 |
学生用绘图仪的定心弹簧圆规 |
(Drop bow for standard drawing instruments) |
DIN 58545-1996 |
标准绘图仪上铅笔芯或针用插接件 |
(Pencil points or divider points for standard drawing instruments (S)) |
DIN 58546-1996 |
学生绘图仪的鸭嘴笔插脚 |
(Pen points for standard drawing instruments) |
DIN 58548-1996 |
学生绘图仪的延长杆 |
(Lengthening bar for standard drawing instruments) |
DIN 58551-1975 |
学生绘图仪的中传动装置 |
(Spring bow centre-wheel for drawing instruments) |
DIN 58552-1975 |
绘图仪螺纹套 |
(Threaded bushings for drawing instruments) |
DIN 58553-1996 |
绘图仪用尖针 |
(Needle holders for drawing instruments) |
DIN 58556-1987 |
绘图仪的快速调整圆规和部件和快速调整圆规 |
(Quick setting bow pencil and quick setting bow combination with interchangeable parts) |
DIN 58600-2002 |
呼吸保护器.德国消防队用高压压缩空气呼吸器的自动呼吸机与呼吸连接的插塞连接 |
(Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade) |
DIN 58600-2003 |
呼吸保护器.德国消防队用自调需氧量氧气调节阀与独立开路压缩空气呼吸器面罩之间的插塞连接 |
(Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade) |
DIN 58639-1998 |
自救用呼吸防护器.自救用带面罩和氧气的隔离装置.要求,检验,标识 |
(Respiratory protective devices for self-rescue - Self-contained closed-circuit compressed oxygen breathing apparatus incorporating a hood - Requirements, testing, marking) |
DIN 58647-7-1997 |
自救式呼吸防护器.第7部分:自救式过滤设备.要求,试验,标志 |
(Respiratory protective devices for self-rescue - Part 7: Filtering devices for self-rescue; requirements, testing, marking) |
DIN 58648-2-1997 |
呼吸防护器.带呼吸保护服的压缩空气软管器具.第2部分:安全技术要求.检验.标记 |
(Respiratory protective devices - Compressed air line breathing apparatus incorporating a suit - Part 2: Requirements, testing, marking) |
DIN 58651-2-1997 |
呼吸保护器.用压缩氧气的再生呼吸装置.第2部分:适度工作用短时压缩氧气防护器.要求.检验.标记 |
(Respiratory protective devices - Self-contained closed-circuit breathing apparatus, compressed oxygen type - Part 2: Short duration-compressed oxygen type for moderate work rates; requirements, testing, marking) |
DIN 58652-1-1997 |
呼吸保护器.用压缩氧气的再生呼吸装置.第1部分:适度工作用短时化学氧气(KO2)防护器.要求,检验,标记 |
(Respiratory protective devices - Self-contained closed-circuit breathing apparatus - Part 1: Short duration-chemical oxygen (KO) generating type for moderate work rates; requirements, testing, marking) |
DIN 58652-2-1997 |
呼吸保护器.用压缩氧气的再生呼吸装置.第2部分:工作和救生用化学氧气(KO2)防护器.要求,检验,标记 |
(Respiratory protective devices - Self-contained closed-circuit breathing apparatus - Part 2: Chemical oxygen (KO) generating type for work and rescue; requirements, testing, marking) |
DIN 58652-3-1997 |
呼吸保护器.用压缩氧气的再生呼吸装置.第2部分:适度工作用短时化学氧气(HaC10.3)防护器.要求,检验,标记 |
(Respiratory protective devices - Self-contained closed-circuit breathing apparatus - Part 3: Short duration, chemical oxygen (NaClO) generating type for moderate work rates; requirements, testing, marking) |
DIN 58652-4-1997 |
呼吸保护器.用压缩氧气的再生呼吸装置.第2部分:工作和救生用化学氧气(HaC10.3)防护器.要求,检验,标记 |
(Respiratory protective devices - Self-contained closed-circuit breathing apparatus - Part 4: Chemical oxygen (NaClO) generating type for work and rescue; requirements, testing, marking) |
DIN 58653-1960 |
气象仪器.最小温度计 |
(Meteorological devices - Minimum thermometer) |
DIN 58654-1960 |
气象仪器.最大温度计 |
(Meteorological devices - Maximum thermometer) |
DIN 58655-1960 |
气象仪器.20至310mm的地表温度计 |
(Meteorological devices - Ground thermometer 20 up to 310 mm) |
DIN 58660-1966 |
气象仪器.干湿球温度计用370型温度计 |
(Meteorological instruments - Thermometer 370 for psychrometer) |
DIN 58661-1966 |
气象仪器.干湿球温度计用280型温度计 |
(Meteorological instruments - Thermometer 280 for psychrometer) |
DIN 58664-1968 |
气象仪器.地下温度计 |
(Meteorological instruments - Earth thermometers) |
DIN 58681-1 Bb.1-1981 |
首饰标签.标签数据组示例 |
(Label for jewellery; example for label-datas) |
DIN 58681-1-1981 |
首饰的标签.成套首饰的标签 |
(Label for jewellery; label for jewellery of multiple production) |
DIN 58682-1989 |
手饰的镀金.概念.标记 |
(Gold coatings for jewellery; definition, marking) |
DIN 58700-1-1978 |
ISO配合.精密仪器的公差范围选择.公差范围.公称尺寸 |
(ISO-limits and fits; selection of tolerance zones for fine-mechanics, tolerance zones, nominal deviations) |
DIN 58700-2-1978 |
ISO配合.精密仪器的公差范围选择.推荐配合 |
(ISO-fits; selection of tolerance zones for fine-mechanics, recommended fits) |
DIN 58721-1984 |
光学加工.光学机床和光学设备.分类 |
(Production in optical engineering; optical machines and production devices; classification) |
DIN 58722-1-2000 |
光学加工.光学加工的定义.第1部分:工艺 |
(Production in optical engineering - Definitions related to production in optical engineering - Part 1: Processes) |
DIN 58722-2-2001 |
光学加工.与光学加工有关的术语.第2部分:设备 |
(Production in optical engineering - Terms relating to production in optical engineering - Part 2: Equipment) |
DIN 58723-1985 |
光学加工.金刚石磨具 |
(Production in optic of engineering; diamond impregnated tools for facetts) |
DIN 58724-2000 |
光学加工.球径计.球径计环 |
(Production in optical engineering - Spherometer - Ring for spherometer) |
DIN 58725-1987 |
光学加工.具有附加配合部分的螺纹连接 |
(Production in optical engineering; screwed connection with fitting part) |
DIN 58726-1977 |
光学加工.无附加配合部分的螺纹连接 |
(Production in optical engineering; screwed connections without fitting part) |
DIN 58727-1-1973 |
光学机床用的不带硬质金属套的球形销 |
(Surfacing pins for optics processing machines, without ball point cemented metal carbide) |
DIN 58727-2-1986 |
光学加工.光学机床用带球形的硬质合金尖的球形销 |
(Produktion in optical engineering: surfacing pins with spherical cemented metal carbide point) |
DIN 58727-3-1986 |
光学加工.光学机床用带圆柱形的硬质合金尖的球形销 |
(Production in optical engineering; surfacing pins with cylindrical cemented carbide point) |
DIN 58729-1977 |
光学加工.球形推力轴承 |
(Production in optical engineering; ball seats) |
DIN 58735-1998 |
光学加工.储料盘 |
(Production in optical engineering - Magazin-disks) |
DIN 58736-1-1997 |
光学加工.定心罩.第1部分:带连接螺纹 |
(Production in optical engineering - Centering bells - Part 1: With fitting thread) |
DIN 58736-2-2001 |
光学加工.定心罩.第2部分:内部连接用柱形配件尺寸30mm和46mm的定心罩 |
(Production in optical engineering - Centering bells - Teil 2: With cylindrical fitting dimension 30 mm and 46 mm for inner connection) |
DIN 58736-3-2001 |
光学加工.定心罩.第3部分:外连接用的12mm和25mm的带园柱形配件尺寸 |
(Production in optical engineering - Centering bells - Part 3: With cylindrical fitting dimension 12 mm and 25 mm for outer connection) |
DIN 58737-1-1997 |
光学加工.定心主轴.第1部分:带连接螺纹的定心主轴.不适于新结构 |
(Production in optical engineering - Spindles - Part 1: Spindles with fitting thread; inactive for new design) |
DIN 58737-2-2001 |
光学加工.定心主轴.第2部分:带园柱形夹的定心主轴 |
(Production in optical engineering - Spindles - Part 2: Spindles with clamping cylinder) |
DIN 58739-1-2002 |
光学加工.光学用夹具.第1部分:真空夹头 |
(Production in optical engineering - Workpiece receptions for optics - Part 1: Vacuum chucks) |
DIN 58739-2-2002 |
光学加工.光学用夹具.第2部分:带隔膜的夹头 |
(Production in optical engineering - Workpiece receptions for optics - Part 2: Chucks with membranes) |
DIN 58739-3-2002 |
光学加工.光学用夹具.第3部分:单镜头用夹头 |
(Production in optical engineering - Workpiece receptions for optics - Part 3: Collets for single lenses) |
DIN 58739-4-2002 |
光学加工.光学用夹具.第4部分:支承体的夹头 |
(Production in optical engineering - Workpiece receptions for optics - Part 4: Collets for spot blocks) |
DIN 58739-5-2004 |
光学加工.光学用工件夹具.第5部分:眼镜片生产用块材夹头 |
|
DIN 58740-1-1997 |
光学加工.砂轮轴.第1部分:带锥度的砂轮轴 |
(Production in optical engineering - Machine tool spindles - Part 1: Machine tool spindles with steep taper) |
DIN 58740-2-2004 |
光学加工.机床轴.第2部分:带夹紧缸的机床轴 |
(Production in optical engineering - Machine tool spindles - Part 2: Machine tool spindles with clamping cylinder) |
DIN 58740-2-2004 |
光学加工.机床轴.第2部分:带夹紧缸的机床轴 |
|
DIN 58740-3-2004 |
光学加工.机床轴.第3部分:中空锥柄连接 |
|
DIN 58741 Bb.1-2002 |
光学加工.镶金刚石的碗形砂轮.概述 |
(Production in optical engineering - Diamond impregnated cup wheels - Survey) |
DIN 58741-1-1996 |
光学加工.镶金刚石的碗形砂轮.第1部分:带园锥体 |
(Production in optical engineering - Diamond impregnated cup wheels - Part 1: with steep cone) |
DIN 58741-2-1995 |
光学加工.镶金刚石的碗形砂轮.第2部分:带12mm的连接圆柱 |
(Production in optical engineering - Diamond impregnated cup wheels - Part 2: With mounting cylinder 12 mm) |
DIN 58741-2-2004 |
光学加工.镶金刚石的杯形砂轮.第2部分:带安装缸砂轮 |
|
DIN 58741-3-1995 |
光学加工.镶金刚石的碗形砂轮.第3部分:带25mm的连接圆柱 |
(Production in optical engineering - Diamond impregnated cup wheels - Part 3: With mounting cylinder 25 mm) |
DIN 58741-4-2004 |
光学加工.镶金刚石的杯形砂轮.第4部分:组合工具 |
|
DIN 58741-5-2004 |
光学加工.镶金刚石的杯形砂轮.第5部分:电镀的 |
|
DIN 58742-1998 |
光学加工.镶金刚石的定心砂轮和成型砂轮 |
(Production in optical engineering - Diamond impregnated centering discs and discs with special profiles) |
DIN 58743-1976 |
光学加工.镶金刚石的切割锯片 |
(Production in optical engineering; diamond impregnated discs) |