标准号 |
中文名称 |
英文名称 |
DIN 65355-1987 |
航空和航天.闭合环.公制系列.铝可塑合金制 |
(Aerospace; collars, metric series, wrought aluminium alloy) |
DIN 65356-1-1988 |
航空和航天.芳香族的尼龙(芳族).高强度芳族长丝纱.尺寸.质量 |
(Aerospace; aromatic polyamide (aramid); high tenacity aramid filament yarns; dimensions, masses) |
DIN 65356-2-1988 |
航空和航天.芳香族的尼龙(芳族).高强度芳族长丝纱.交货技术要求 |
(Aerospace; aromatic polyamide (aramid); high tenacity aramid filament yarns; technical specification) |
DIN 65359-1990 |
航空和航天.1-4芯.600V.105℃绝缘屏蔽.铜芯屏蔽线.交货技术条件.不用于新结构 |
(Aerospace; shielded electrical cables, copper conductors, insulated shield, one to four conductors, 600 V, 105 C; technical specification) |
DIN 65360-1992 |
航空和航天.滚子链.交货技术条件 |
(Aerospace; roller chains; technical specification) |
DIN 65363-1987 |
航空和航天.操作杆的安全垫 |
(Aerospace; lock washers for flight control rods) |
DIN 65364-1991 |
航空和航天.可调操作杆的叉头.不适于新结构 |
(Aerospace; single fork ends for adjustable control rods) |
DIN 65365-1991 |
航空和航天.可调操作杆的双叉头.不适于新结构 |
(Aerospace; double fork ends for adjustable control rods) |
DIN 65367-1987 |
航空和航天.管道线路用定距器 |
(Aerospace; spacer for tube assemblies) |
DIN 65368-1987 |
航空和航天.软绳.尺寸.质量 |
(Aerospace; lacing cords; dimensions, masses) |
DIN 65369-1991 |
航空和航天.25A.5和11极插座 |
(Aerospace; sockets, five- and eleven-pole 25 Amp) |
DIN 6537-1993 |
台阶式直柄整体硬质合金麻花钻.尺寸 |
(Solid-hardmetall twist drills with stepped parallel shank; dimensions) |
DIN 65370-1991 |
航空和航天.5A.8和14极插座 |
(Aerospace; sockets, eight- and fourteen-pole 5 Amp) |
DIN 65371-1992 |
航空和航天.10A.5极和11极的插座 |
(Aerospace; sockets, five- and eleven-pole, 10 Amp) |
DIN 65373-1989 |
航空和航天.聚酰胺(PA)的半成品和成型件.交货技术条件 |
(Aerospace; polyamide (PA) semi-finished products and moulded parts; technical specification) |
DIN 65374-1989 |
航空和航天.聚四氟乙烯.(PTFE)半成品和成型件.交货技术条件 |
(Aerospace; polytetrafluoroethylene (PTFE) semi-finished products and moulded parts; technical specification) |
DIN 65375-1989 |
航空和航天.纤维增强塑料.单向层压制品的检验.与纤维方向垂直的压力试验 |
(Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction) |
DIN 65378-1989 |
航空和航天.纤维增强塑料.单向层压制品的检验.与纤维方向垂直的拉力试验 |
(Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction) |
DIN 65379-1992 |
航空和航天.镍合金制100℃沉头铆钉 |
(Aerospace; rivets, countersunk 100, nickel alloys) |
DIN 6538-1-1993 |
加强直柄硬质合金制镶刃麻花钻 |
(Twist drills with hardmetal cutting edges with reinforced parallel shank; dimensions) |
DIN 65382-1988 |
航空和航天.塑料用加强纤维.浸渍线试样的拉力试验 |
(Aerospace; reinforcement fibres for plastics; tensile test of impregnated yarn test specimens) |
DIN 65383-1997 |
航空和航天.建筑结构用热固环氧树脂纺织玻璃纤维制长丝织物预浸渍体.技术规范 |
(Aerospace - Thermosetting epoxy woven glass filament fabric preimpregnated for structural applications - Technical specification) |
DIN 65385-1991 |
航空和航天.流体技术.液压.过滤器件.检验证明 |
(Aerospace; hydraulic fluid power; filter elements; reporting of test data) |
DIN 65389-1996 |
航空和航天.冷轧钢板.尺寸.质量 |
(Aerospace - Cold-rolled steel sheet - Dimensions, masses) |
DIN 6539-1991 |
带圆柱形直柄的整体硬质合金麻花钻.尺寸 |
(Solid hardmetal twist drills with continuous parallel shank; dimensions) |
DIN 65390-1989 |
航空和航天.热轧钢板和偏钢.尺寸.质量 |
(Aerospace; hot-rolled steel sheet and plate; dimensions, masses) |
DIN 65391-2002 |
航空航天.等级为:1100MPa/315C/425鳦的耐腐蚀钢的带MJ螺纹的自锁加压螺母 |
(Aerospace - Press nuts with MJ thread, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 鳦/425 鳦) |
DIN 65392-2002 |
航空航天.等级为:1100MPa/235钢制沉孔带MJ螺纹的自锁加压螺母 |
(Aerospace - Press nuts with MJ thread, self-locking, floating, steel; Classification: 1100 MPa/235 鳦) |
DIN 65393-2002 |
航空航天.分类为:900MPa/1100MPa/1250MPa/1550MPa/235鳦的钢制带保护环的锁紧螺母和带MJ螺纹的螺丝接头. |
(Aerospace - Thread inserts with MJ thread, ring locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/235 鳦) |
DIN 65394-1995 |
航空航天.耐腐蚀钢制带保护环的锁紧螺母和带MJ螺纹的螺纹接头.等级900MPa1100MPa1250MPa1500MPa315℃425425 |
(Aerospace - Thread inserts with MJ thread, ring locked, screw-locking, corrosion-resisting steel - Class: 900 MPa/1100 MPa/1250 MPa/1550 MPa/315 鳦/425 鳦) |
DIN 65395-1989 |
航空和航天.钢制带环锁紧环和MJ螺纹的螺柱.公称抗张强度900Mpa.温度235℃以下 |
(Aerospace; studs with MJ thread, ring locked, steel; nominal tensile strength 900 MPa, for temperatures up to 235 C) |
DIN 65396-1989 |
航空和航天.不锈钢环锁紧和MJ螺纹的螺柱.公称抗拉强度1250MPa.温度425℃以下 |
(Aerospace; studs with MJ thread, ring locked, corrosion resisting steel, nominal tensile strength 1250 Mpa, for temperatures up to 425 C) |
DIN 65397-1990 |
航空航天.带MJ螺纹的闭锁、螺钉锁紧的不锈钢制螺纹插头.等级:1100MPa/315℃/425℃ |
(Aerospace; thread inserts with MJ thread, locked, screw-locking, corrosion-resisting steel; class: 1100 MPa/315 鳦/425 鳦) |
DIN 65398-1990 |
航空航天.带MJ螺纹的闭锁、螺钉锁紧的耐腐蚀钢制螺纹插头.等级:900MPa/1100MPa/315℃ |
(Aerospace; thread inserts with MJ-thread, locked, screw-locking, corrosion-resisting steel; class: 900 MPa/1100 MPa/315 鳦) |
DIN 65399-1988 |
航空和航天.铝合金100℃沉头铆钉 |
(Aerospace; rivets, countersunk 100, wrought aluminium alloys) |
DIN 6540-1-1993 |
符合DIN6537和DIN6539的整体硬质合金麻花钻的交货技术条件.要求 |
(Technical delivery conditions for solid hardmetal twist drills according to DIN 6537 and DIN 6539; requirements) |
DIN 6540-2-1993 |
符合DIN6537和DIN6539的整体硬质合金麻花钻的交货技术条件.检验 |
(Technical delivery conditions for solid hardmetal twist drills according to DIN 6537 and DIN 6539; inspection) |
DIN 65422-1-1981 |
航空和航天.闪光报警灯 |
(Aerospace; anti-collision beacon light units) |
DIN 65422-2-1985 |
航空和航天.闪光报警灯.交货技术条件 |
(Aerospace; anti-collision light; technical specification) |
DIN 65423-1981 |
航空和航天.光发射φ100mm的探照灯 |
(Aerospace; spotlights with 100 mm effective diameter) |
DIN 65424-1981 |
航空和航天.光发射φ134mm的探照灯 |
(Aerospace; spotlights with 134 mm effective diameter) |
DIN 65426-1-1985 |
航空和航天.芳族聚酰胺.高模量长丝纱织物-预浸渍体.尺寸.质量 |
(Aerospace; aromatic polyamide (Aramid); pre-impregnated woven fabric of high modulus filament yarn (Prepreg); dimensions, masses) |
DIN 65426-2-1989 |
航空和航天.芳族聚酰胺.高模量长丝织物和EP-树脂预浸渍长丝织物.交货技术条件 |
(Aerospace; aromatic polyamide (aramid); woven filament fabric prepreg from high-modulus filament yarn and epoxy resin; technical specification) |
DIN 65427-1-1984 |
航空和宇航.芳族聚酰胺.高模量长丝纱织物.尺寸.质量 |
(Aerospace; aromatic polyamide (aramid); fabric of high modulus filament yarn; dimensions, masses) |
DIN 65427-2-1991 |
航空和航天.芳香族聚酰胺.高模量长丝纱织物.交货技术条件 |
(Aerospace; aromatic polyamide (aramid); fabric woven from high-modulus filament yarn; technical specification) |
DIN 65428-1987 |
航空和航天.带凸头的连接件用壁厚为0.25mm套筒 |
(Aerospace; sleeves; wall thickness 0,25 mm, for fasteners with protruding head) |
DIN 65429-2002 |
航空航天.带凸头的紧固件用壁厚为0.5mm套筒 |
(Aerospace - Sleeves, wall thickness 0,5 mm, for fasteners with protruding head) |
DIN 65430-2002 |
航空航天.带埋头的紧固件用壁厚为0.25mm套筒 |
(Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with countersunk head) |
DIN 65431-2002 |
航空航天.带埋头的紧固件用壁厚为0.5mm套筒 |
(Aerospace - Sleeves, wall thickness 0,5 mm, for fasteners with countersunk head) |
DIN 65433-2002 |
航空航天.带减径埋头的紧固件用壁厚为0.25mm套筒 |
(Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with reduced countersunk head) |
DIN 65434-1987 |
航空和航天.带减径埋头的连接件用壁厚为0.5mm套筒 |
(Aerospace; sleeves; wall thickness 0,5 mm, for fasteners with reduced countersunk head) |
DIN 65435-1989 |
航空和航天.连接件用套管.技术交货条件 |
(Aerospace; sleeves for fasteners; technical specification) |
DIN 65436-1989 |
航空和航天;钛和钛合金的标准质量(STQ)和鉴别质量(DQ).要求和检验 |
(Aerospace; standard quality (STQ) and disc quality (DQ) of titanium and titanium alloys; requirements and tests) |
DIN 65438-1993 |
航空和航天.钛合金.短螺纹.额定抗拉强度1100MPa.温度315℃以下具有MJ螺纹的十二角头配合螺栓 |
(Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
DIN 65439-1984 |
航空和航天.MJ螺纹的十二角头紧公差螺钉.钢制中等长度螺纹.额定抗拉强度1250MPa.温度可达235℃ |
(Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1250 MPa, for temperatures up to 235 C) |
DIN 65440-1984 |
航空和航天.MJ螺纹的十二角头紧公差螺钉.不锈钢制中等长度螺纹.额定抗拉强度1250MPa.温度可达315℃ |
(Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in corrosion resisting steel, nominal tensile strength 1250 MPa, for temperatures up to 315 C) |
DIN 65441-1984 |
航空和航天.MJ螺纹的十二角头紧公差螺钉.钢制中等长度螺纹.额定抗拉强度1550MPa.温度可达235℃ |
(Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1550 MPa, for temperatures up to 235 C) |
DIN 65442-1993 |
航空和航天.耐蚀镍合金.中长螺纹.额定抗拉强度1550MPa.温度315℃以下具有MJ螺纹的十二角头配合螺栓 |
(Aerospace; bihexagonal head bolts, close tolerance, with medium-length MJ thread, corrosion resisting nickel alloy; nominal tensile strength 1550 MPa, for temperatures up to 315 C) |
DIN 65443-1984 |
航空和航天.MJ螺纹的十二角头紧公差螺钉.不锈钢制中等长度螺纹.温度可达235℃.抗拉强度额定值为1800MPa |
(Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1800 MPa, for temperatures up to 235 C) |
DIN 65444-1993 |
航空和航天.米制系列100°沉头镍合金铆钉 |
(Aerospace; rivets, 100 countersunk head, nickel alloy, metric series) |
DIN 65445-1987 |
航空和航天.公制系列.镍合金制.减轻埋头铆钉100° |
(Aerospace; rivets, 100 reduced countersunk head, metric series, nickel alloys) |
DIN 65446-1993 |
航空和航天.米制系列通用头镍合金铆钉 |
(Aerospace; rivets, universal head, nickel alloys, metric series) |
DIN 65448-1988 |
航空和航天.结构粘合剂.楔劈试验 |
(Aerospace; structural adhesives; wedge test) |
DIN 65451-1990 |
航空航天.带MJ螺纹的闭锁、螺钉锁紧的钢制螺纹插头.等级:900MPa/1100MPa/235℃ |
(Aerospace; thread inserts with MJ thread, locked, screw-locking, steel; class: 900 MPa/1100 MPa/235 鳦) |
DIN 65452-1988 |
航空和航天.光束有效直径为100.134和200mm的探照灯.交货技术条件 |
(Aerospace; spotlights with 100 mm, 134 mm and 200 mm effective diameter; technical specification) |
DIN 65453-1993 |
航空和航天.碳素纤维和双马来酰亚胺树脂或聚酰亚胺树脂制单向浸渍体 |
(Aerospace; preimpregnated unidirectional sheet of carbon fibres and bismaleinimide- or polyimide resin; technical specification) |
DIN 65454-1988 |
航空和航天.合页铝或不锈钢制挤压成型的合页生产中的半合页和合页.轻系列 |
(Aerospace; hinges, extruded, in aluminium and corrosion-restisting steel; half-hinges and hinges in manufacturing lengths; light series) |
DIN 65455-1990 |
航空和航天.钢.镍.钛合金无缝管.超声波检验 |
(Aerospace; seamless tubes in steel, nickel and titanium alloys; ultrasonic inspection) |
DIN 65456-1987 |
航空和航天.带接地孔操作杆用垫圈 |
(Aerospace; washers for flight control rods, with hole for bonding) |
DIN 65457-1987 |
航空和航天.钢板制套环.尺寸.测量 |
(Aerospace; thimbles, formed from steel; dimensions, masses) |
DIN 65460-1988 |
航空和航天.铝和铝合金的酸洗.也适用于电阻焊后代号0100 |
(Aerospace; acid pickling of aluminium and aluminium alloys, also for resistance welding; code number 0100) |
DIN 65464-1990 |
航空和航天.MJ螺纹带锁紧垫圈的钛合金双头螺钉.315℃以下.额定抗拉强度1100Pa |
(Aerospace; studs with MJ thread, ring locked, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 C) |
DIN 65465-1993 |
航空和航天.铆接用米制系列垫圈 |
(Aerospace; washers for rivet assemblies, metric series) |
DIN 65466-1996 |
航空和航天.纤维增强塑料.单向层压制品的检验.拉伸剪切强度和剪切模数的测定 |
(Aerospace - Fibre reinforced plastics - Testing of unidirectional laminates; Determination of shear strength and shear modulus in tension) |
DIN 65467-1999 |
航空和航天.带和不带增强的反应性树脂系统的检验.DSC方法 |
(Aerospace - Testing of thermosetting resin systems with and without reinforcement - DSC method) |
DIN 65468-1991 |
航空和航天.喷丸清理.标识号0215 |
(Aerospace; abrasive cleaning; code number 0215) |
DIN 65469-1992 |
航空和航天.纤维增强塑料.单层扁平拉伸试件的拉伸试验 |
(Aerospace; fibre-reinforced plastics; tensile test of monolayer flat tension specimens) |
DIN 65470-1989 |
航空和航天.金属材料焊接用焊接填充金属.交货技术条件 |
(Aerospace; filler metals for welding metallic materials; technical specification) |
DIN 65471-1991 |
航空和航天.钛和钛合金用焊接填料.焊条和焊丝.尺寸.质量 |
(Aerospace; filler metals for welding titanium and titanium alloys; filler rods and filler wires; dimensions, masses) |
DIN 65473-1991 |
航空和航天.电解脱脂和净化.标识号0030至0033 |
(Aerospace; electrolytic degreasing and cleaning; code numbers 0030 to 0033) |
DIN 65474-1992 |
航空和航天.纤维增强塑料.热脉冲激光尖锋试验 |
(Aerospace; fibre reinforced plastics; thermal-spike test method) |
DIN 65480-1989 |
航空航天.耐腐蚀钢制带凸缘、自锁定和MJ螺纹的六角螺母.等级:1100MPa/315℃ |
(Aerospace; hexagon nuts with flange and MJ thread, self-locking, corrosion-resisting steel; class: 1100 MPa/315 鳦) |
DIN 65485-1993 |
航空和航天.结构用紧固件.旋转紧固件的机械特性.紧固件组件 |
(Aerospace; fasteners for structural application; rotary fastener, mechanical properties; rotary fastener, assembly) |
DIN 65486-1993 |
航空和航天.结构用紧固件.旋转紧固件的机械特性.密封型紧固件总成 |
(Aerospace; fasteners for structural application; rotary fasteners, mechanical properties; rotary fastener, assembly, pressure-tight) |
DIN 65487-1993 |
航空和航天.结构用紧固件.旋转紧固件.沉头锁定销钉 |
(Aerospace; fasteners for structural application; rotary fasteners; stud with countersunk head) |
DIN 65488-1993 |
航空和航天.结构紧固件.旋转紧固件.安装尺寸 |
(Aerospace; fasteners for structural application; rotary fasteners; installation dimensions) |
DIN 65489-1993 |
航空和航天.结构和非结构用紧固零件.旋转紧固零件.沉头垫片 |
(Aerospace; fasteners for structural and non-structural applications; rotary fasteners; countersunk washer) |
DIN 65492-1993 |
航空和航天.结构紧固件.旋转紧固件.旋转紧固件插孔 |
(Aerospace; fasteners for structural application; rotary fasteners; receptacle) |
DIN 65493-1993 |
航空和航天.结构紧固件.旋转紧固件.压力密封式旋转紧固件插孔 |
(Aerospace; fasteners for structural application; rotary fasteners; receptacle, pressure-tight) |
DIN 65494-101-1989 |
航空和航天.用于静负荷凸头铆接的铆钉计算值.单剪切.铆钉材料3.1124公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.1124, metric series) |
DIN 65494-102-1989 |
航空和航天.用于静负荷凸头铆接的铆钉计算值.单剪切.铆钉材料3.1324.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.1324, metric series) |
DIN 65494-103-1989 |
航空和航天.用于静负荷凸头铆接的铆钉计算值.单剪切.铆钉材料3.3354.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.3354, metric series) |
DIN 65494-105-1989 |
航空和航天.用于静负荷凸头铆接的铆钉计算值.单剪切.铆钉材料2.4360.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 2.4360, metric series) |
DIN 65494-301-1989 |
航空和航天.用于静力负荷凸头铆接的铆钉计算值.双剪切.铆钉材料3.1124.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.1124, metric series) |
DIN 65494-302-1989 |
航空和航天.用于静力负荷凸头铆接的铆钉计算值.双剪切.铆钉材料3.1324.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.1324, metric series) |
DIN 65494-303-1989 |
航空和航天.用于静力负荷凸头铆接的铆钉计算值.双剪切.铆钉材料3.3354.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.3354, metric series) |
DIN 65494-305-1989 |
航空和航天.用于静力负荷凸头铆接的铆钉计算值.双剪切.铆钉材料2.4360.公制系列 |
(Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 2.4360, metric series) |
DIN 65495-101-1989 |
航空和航天.用于静力负荷沉头铆接的铆钉计算值.单剪切.铆钉材料3.1124.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, single shear; rivet material 3.1124, metric series) |
DIN 65495-102-1989 |
航空和航天.用于静力负荷沉头铆接的铆钉计算值.单剪切.铆钉材料3.1324.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, single shear; rivet material 3.1324, metric series) |
DIN 65495-105-1989 |
航空和航天.用于静力负荷沉头铆接的铆钉计算值.单剪切.铆钉材料2.4360.公制系列 |
(Aerospace; rivet design values, static load, flush head rivet joints, single shear; rivet material 2.4360, metric series) |
DIN 65495-201-1990 |
航空和航天.用于静力负荷沉头铆接的铆接计算值.轧制单剪切铆钉材料3.1124.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 3.1124, metric series) |
DIN 65495-202-1990 |
航空和航天.用于静力负荷沉头铆接的铆接计算值.轧制单剪切铆钉材料3.1324.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 3.1324, metric series) |
DIN 65495-205-1990 |
航空和航天.用于静力负荷沉头铆接的铆接计算值.铆钉材料2.4360.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 2.4360, metric series) |
DIN 65495-301-1989 |
航空和航天.用于静力负荷铆接的铆钉计算值.双剪切.铆钉材料3.1124.公制系列 |
(Aerospace; rivet design values, static load, for flush heat rivet joints, double shear; rivet material 3.1124, metric series) |
DIN 65495-302-1989 |
航空和航天.用于静力负荷沉头铆接的铆钉计算值.双剪切.铆钉材料3.1324.公制系列 |
(Aerospace; rivet design values, static load, for flush heat rivet joints, double shear; rivet material 3.1324, metric series) |
DIN 65495-401-1990 |
航空和航天.用于静力负荷沉头铆接的铆接计算值.轧制双剪切.铆钉材料3.1124.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, double shear, dimpled, rivet material 3.1124, metric series) |
DIN 65495-402-1990 |
航空和航天.轧制双面剪沉头铆接.静负荷时的铆接计算值.铆钉材料3.1324.公制系列 |
(Aerospace; rivet design values, static load, for flush head rivet joints, double shear, dimpled, rivet material 3.1324, metric series) |
DIN 65498-1991 |
航空和航天.聚醚亚胺半成品和模制件.交货技术条件 |
(Aerospace; polyetherimide (PEI) semi-finished products and moulded parts; technical specification) |
DIN 65500-1984 |
航空和航天.带MJ螺纹铝合金扁六角螺母 |
(Aerospace; nuts, hexagon, thin, with MJ-thread, aluminium alloy) |
DIN 65501-2001 |
航空和航天.带MJ螺纹的铆接螺母的垫片 |
(Aerospace - Shims for anchor nuts with MJ-thread) |
DIN 65502-1984 |
航空和航天.有肋条翼形十字槽和MJ螺纹的平头螺纹.温度可达425℃.额定抗拉强度700MPa |
(Aerospace; pan head bolts with ripped TORQ-SET (ACR) recess and MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 C) |
DIN 65503-1984 |
航空航天.自锁、气密、双耳和钢制带MJ螺纹的铆接螺母.等级:900MPa.耐燃料性.-55至+120℃ |
(Aerospace; anchor nuts with MJ-thread, self-locking, pressure tight, two lug, steel, class: 900 MPa, fuel resistant, from -55 to +120 鳦) |
DIN 65504-1989 |
航空航天.自锁、气密、双耳、耐腐蚀钢制带MJ螺纹的铆接螺母.等级:900MPa.对燃料的稳定性.-55至+120℃ |
(Aerospace; anchor nuts with MJ thread, self-locking, pressure tight, two lug, corrosion-resisting steel, fuel resistant, from - 55 to + 120 鳦) |
DIN 65505-1984 |
航空航天.自锁、气密、双耳、钢制带MJ螺纹铆接螺母.等级900MPa.耐热空气.-55至+230℃ |
(Aerospace; anchor nuts with MJ-thread, self-locking, pressure tight, two lug, steel, class: 900 MPa, hot-air resistant, from -55 to +230 鳦) |
DIN 65506-1989 |
航空航天.自锁、气密、双耳、耐腐蚀钢制带MJ螺纹的铆接螺母.等级:900MPa.耐空气.-55至+230℃ |
(Aerospace; anchor nuts with MJ thread, self-locking, pressure tight, two lug, corrosions-resisting steel, air resistant, from - 55 to + 230 鳦) |
DIN 65507-1986 |
航空航天.带凸缘垫片和埋头孔自锁、钢制带MJ螺纹的六角螺母.等级:1100MPa/235DEGREES |
(Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, steel; class: 1100 MPa/235 鳦) |
DIN 65508-1986 |
航空航天.带凸缘垫片和埋头孔、自锁、耐腐蚀钢带MJ螺纹的六角螺母.等级:1100MPa/315℃/425℃ |
(Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, corrosion-resistant steel; class: 1100 MPa/315 鳦/425 鳦) |
DIN 65509-1984 |
航空和航天.带钢制MJ螺纹的六角螺母.等级:1100MPa/235DEGREESC |
(Aerospace; nuts, hexagon, with MJ-thread, steel, class: 1100 MPa/235 C) |
DIN 65510-1984 |
航空和航天.钢制.带MJ螺纹的扁六角螺母.等级:1100MPa/235DEGREESC |
(Aerospace; nuts, hexagon, thin, with MJ-thread steel, classification: 1100 MPa/235 C) |
DIN 65515-1984 |
航空和航天.钛合金制.短螺纹.有内锯齿和MJ螺纹的圆柱头螺钉.温度315℃以下.额定抗拉强度1100MPa |
(Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 C) |