标准号 |
中文名称 |
英文名称 |
DIN 28153-2-1994 |
钢制搪瓷搅拌容器用的闭锁盖.公称宽度100至250 |
(Covers for DN 100 up to DN 250 openings in glass-lined apparatuses) |
DIN 28154-1983 |
滑动环密封的非合金和不锈钢搅拌器的轴端.尺寸 |
(Shaft end for carbon and stainless steel agitators, for rotating mechanical seals; dimensions) |
DIN 28155-1992 |
非合金钢和不锈钢制搅拌轴用联轴节.搅拌容器的联轴节.尺寸 |
(Flanged couplings for carbon and stainless steel agitator shafts; coupling in the agitator vessel; dimensions) |
DIN 28156-1981 |
填料箱用非合金钢和不锈钢搅拌器的轴头.尺寸 |
(Shaft end for agitators of carbon and stainless steel, for stuffing boxes; dimensions) |
DIN 28157-1992 |
钢制搪瓷叶轮搅拌器.尺寸 |
(One piece glass lined impeller agitator; dimensions) |
DIN 28158-1984 |
单件搪瓷钢锚式搅拌器.尺寸 |
(One piece glass lined anchor agitator; dimensions) |
DIN 28159 Bb.1-1984 |
钢制搪瓷的单个搅拌器的轴端.有关强度信息 |
(Shaft end for externally coupled glass lined steel agitators; information concerning strength) |
DIN 28159-1983 |
钢制搪瓷的单个搅拌器的轴端.尺寸 |
(Shaft end for externally coupled glass lined steel agitators; dimensions) |
DIN 28160-1983 |
非合金钢和不锈钢制搅拌容器用支撑环.纵向位置 |
(Support rings for carbon and stainless steel agitator vessels; position) |
DIN 28161-1987 |
对搅拌传动的要求.旋转速度.旋转方向.支承.转动的精确镀.滑动密封环的折卸空间 |
(Requirements on agitator drives; agitator speed and direction, bearing application running accuracy, dismounting space for shaft seal) |
DIN 28162-1-1983 |
带滑动环密封的搅拌器传动装置用搅拌传动托座 |
(Agitator gear stools for agitator drives with a rotating mechanical seal) |
DIN 28162-2-1983 |
带填料盒密封的搅拌器传动装置用搅拌传动托座 |
(Agitator gear stools for agitator drives with gland sealing) |
DIN 28163-1983 |
非合金钢和不锈钢制搅拌轴的密封填料盒 |
(Stuffing box for agitator shafts of carbon and stainless steel) |
DIN 2817-1-1995 |
带卡紧件的软管管件.第1部分:要求.概览.标记和检验 |
(Hose fittings with clamp unit - Part 1: Requirements, summary, designations and testing) |
DIN 2817-2-1995 |
带卡紧件的软管管件.第2部分:螺丝和销钉卡紧件 |
(Hose fittings with clamp unit - Part 2: Clamp units, bolted or pinned) |
DIN 2817-3-1995 |
带卡紧件的软管管件.第3部分:软管侧面支撑件.尺寸和结构 |
(Hose fittings with clamp unit - Part 3: Hose side couplings; dimensions and design) |
DIN 2817-4-1995 |
带卡紧件的软管管件.第4部分:带外管螺纹的软管管接头 |
(Hose fittings with clamp unit - Part 4: Hose couplings with male pipe thread) |
DIN 2817-5-1995 |
带卡紧件的软管管件.第5部分:带管螺纹锁紧螺母的软管支承 |
(Hose fittings with clamp unit - Part 5: Hose couplings with union nut and pipe thread) |
DIN 2817-6-1995 |
带卡紧件的软管管件.第6部分:PN10用连接尺寸,带法兰的软管支撑件 |
(Hose fittings with clamp unit - Part 6: Hose couplings with flanges, fitting dimensions for PN 10) |
DIN 28179-1989 |
管束式热交换器用钢制U型管.交货技术条件 |
(Steel U-tubes for tubular heat exchangers; technical delivery conditions) |
DIN 28180-1985 |
管束式热交换器的无缝钢管.尺寸.尺寸偏差和材料 |
Seamless steel tubes for tubular heat exchangers; dimensions, dimensional deviations and materials |
DIN 28181-1985 |
管束式热交换器的焊接钢管.尺寸.尺寸偏差和材料 |
(Welded steel tubes for tubular heat exchangers; dimensions, dimensional deviations and materials) |
DIN 28182-1987 |
管束式热交换器.管子分布.管底座钻孔直径.导向扇形块和支承板 |
(Tubular heat exchangers; tube pitches, diameter of bores in tube sheets, baffles and support plates) |
DIN 28183-1988 |
壳管式热交换器.名称 |
(Tubular heat exchangers; nomenclature) |
DIN 28184-1-1988 |
两端固定的壳管式热交换器.内管直径25.三角形管心距32.内管的数目和配置 |
(Fixed head tubular heat exchangers with type 25 tubes and triangular 32 tube pitch; number and pattern of tubes) |
DIN 28184-2-1988 |
两端固定的壳管式热交换器.内管直径25.方形管心距32.内管的数目和配置 |
(Fixed head heat exchangers with type 25 tubes and square 32 tube pitch; number and pattern of tubes) |
DIN 28184-4-1988 |
两端固定的壳管式热交换器.内管直径20.三角管心距25.内管的数目和配置 |
(Fixed head heat exchangers with type 20 tubes and triangular 25 tube pitch; number and pattern of tubes) |
DIN 28185-1988 |
管原式热交换器.管壳安装 |
(Tubular heat exchangers; tube bundle components) |
DIN 28187-1991 |
管束式热交换器.管与底板紧固连接 |
(Tubular heat exchangers; connections tube to tube sheet) |
DIN 28190-1981 |
带焊接的浮动头的管束式热交换器.程数2.内管25.方形管心距32.内管.支杆和滑轨的数目和配置 |
(Floating head heat exchanger with welded floating head; number of passes: 2, tubes 25, square tube pitch 32; number and pattern of tubes, tie rods and slide rails) |
DIN 28191-1981 |
带装上法兰盘浮动头的管束式热交换器.程数2.4和8.内管25.方形管心距32.内管.支杆和滑轨的数目和配置 |
(Floating head heat exchanger with flanged floating head; number of passes: 2,4 and 8, tubes 25, square tube pitch 32; number and pattern of tubes, tie rods and slide rails) |
DIN 28192-1994 |
管束用橡胶隔板密封.热交换器 |
(Elastic pass partition gaskets for tubular heat exchangers) |
DIN 2825-1 Bb.1-1994 |
蒸汽和热水用橡胶软管.安装说明 |
(Hoses assemblies made of elastomers for steam and hot water; hints for assembly) |
DIN 2825-1-1994 |
蒸汽和热水用橡胶软管.一般要求 |
(Hose assemblies made of elastomers for steam and hot water; general requiements) |
DIN 2825-2-1994 |
蒸汽和热水用橡胶软管.检验 |
(Hose assemblies made of elastomers for steam and hot water; tests) |
DIN 2826-1994 |
蒸汽和热水用带卡夹的软管管件.DN15至DN50.18巴以下 |
(Hose fittings with clamp unit for steam and hot water, DN 15 up to DN 50, up to 18 bar) |
DIN 2827-1994 |
化学材料用不锈钢软管 |
(Hose assemblies of stainless steel for chemical products) |
DIN 2828-1994 |
软管用锁定离合装置.公称压力 |
(Cam locking couplings for hose assemblies; nominal pressure 10) |
DIN 28400 Bb.1-1982 |
真空技术.名称和定义.字顺索引 |
(Vacuum technology, terms and definitions; alphabetical index) |
DIN 28400-1-1990 |
真空技术.名称和定义.普用名称 |
(Vacuum technology; terms and definitions; general terms) |
DIN 28400-2-1980 |
真空技术.名称和定义.真空泵 |
(Vacuum technology; terms and definitions, vacuum pumps) |
DIN 28400-3-1992 |
真空技术.名称和定义.真空测量仪表 |
(Vacuum technology; terms and definitions; vacuum gauges) |
DIN 28400-4-1976 |
真空技术.名称和定义.真空涂层技术 |
(Vacuum technology - Terms and definitions, vacuum coating) |
DIN 28400-5-1981 |
真空技术.名称和定义.真空干燥和升华干燥 |
(Vacuum technology; terms and definitions; vacuum drying and lyophilisation) |
DIN 28400-6-1980 |
真空技术.名称和定义.表层分析技术 |
(Vacuum technology; terms and definitions, surface analysis techniques) |
DIN 28400-7-1978 |
真空技术.名称及定义.真空冶金学 |
(Vakuum technology; terms and definitions, vacuum metallurgie) |
DIN 28400-8-1997 |
真空技术.名称和定义.第8部分:真空系统.部件和附件 |
(Vacuum technology - Terms and definitions - Part 8: Vacuum systems, components and accessories) |
DIN 28401-1976 |
真空技术.图形符号.概览 |
(Vacuum technology; graphical symbols, summary) |
DIN 28402-1976 |
真空技术.尺寸.公式符号.单位.概览 |
(Vacuum technology; quantities, symbols, units, summary) |
DIN 28403-1986 |
真空技术.快速连接.小法兰连接 |
(Vacuum technology; quick release couplings; clamped type couplings) |
DIN 28404-1986 |
真空技术.法兰.尺寸 |
(Vacuum technology; flanges; dimensions) |
DIN 28410-1968 |
真空技术.质谱测定的分压力测量仪.概念.参数.工作条件 |
(Vacuum Technology; Mass Spectrometer Partial Pressure Gauges; Definitions, Characteristics, Operating Conditions) |
DIN 28411-1976 |
真空技术.质谱仪检漏器的验收规则.概念 |
(Vacuum technology; acceptance specifications for mass spectrometer-type leak-detector, terms) |
DIN 28416-1976 |
真空技术.10(-3)至10(-7)mbar范围真空计的校准.一般方法:通过连续不断的流动降低压力 |
(Vaccum technology; calibration of vacuum gauges within the range of 10 to 10 mbar, general method: pressure reduction by continuous flow) |
DIN 28417-1976 |
真空技术.按容积法在互压时测量PV流量 |
(Vacuum technology; measurement of throughput by the volumetric method at constant pressure) |
DIN 28418-1-1976 |
真空技术.用参比测量仪直接比较校准真空计的标准方法.一般原理 |
(Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge) |
DIN 28418-2-1978 |
真空技术.用参比测量仪直接比较校准真空计的标准方法.电离真空计 |
(Vakuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vaccum gauge, ionization vacuum gauge) |
DIN 28418-3-1980 |
真空技术.用参比测量仪直接比较校准真空计的标准方法.热导真空计 |
(Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge, thermal conductivity gauges) |
DIN 28426-1-1983 |
真空技术.旋转真空泵.在近似真空和高真空范围内的闭塞阀真空泵和旋转阀真空泵的验收规则 |
(Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum) |
DIN 28426-2-1976 |
真空技术.旋转活塞真空泵的验收规则.高真空范围内的摇杆式活塞真空泵 |
(Vacuum technology; acceptance specifications for roots vacuum pumps for the range of medium vacuum) |
DIN 28427-1983 |
真空技术.蒸气压低于1mbar的扩散泵和蒸气喷射真空泵的验收规则 |
(Vacuum technology; acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid 1 mbar) |
DIN 28428-1978 |
真空技术.涡轮分子泵的验收规则 |
(Vacuum technology; acceptance specifications for turbomolecular pumps) |
DIN 28429-2003 |
真空技术.溅射离子泵的验收规范 |
(Vacuum technology - Acceptance specifications for getter ion pumps) |
DIN 28430 Berichtigung 1-2002 |
DIN28430:1984-11的勘误 |
(Corrigenda to DIN 28430:1984-11) |
DIN 28430-1984 |
真空技术.以蒸汽作为驱动介质的蒸汽喷射真空泵和蒸汽喷射压缩机用测量规则 |
(Vacuum technology; rules for the measurement of steam jet vacuum pumps and steam jet compressors using steam as the working fluid) |
DIN 28431-1987 |
真空技术.液体环式真空泵的验收规程 |
(Vacuum technology; acceptance specifications for liquid ring vacuum pumps) |
DIN 28432-1996 |
真空技术.膜片真空泵的验收规则 |
(Vacuum technology - Acceptance specifications for diaphragm vacuum pumps) |
DIN 28450-1-1996 |
罐车联管节.额定压力10.额定宽度50.80和100.第1部分:一览表.结构原理.检验.符号 |
(Couplings for tank trucks, nominal pressure 10, nominal size 50, 80 and 100 - Part 1: Survey, design, testing, marking) |
DIN 28450-2-1996 |
罐车联管节.额定压力10.额定宽度50.80和100.第2部分:实心联管节 |
(Couplings for tank trucks, nominal pressure 10, nominal size 50, 80 and 100 - Part 2: Male coupling) |
DIN 28450-3-1996 |
罐车联管节.额定压力10.额定宽度50.80和100.第3部分:电磁联接管节 |
(Couplings for tank trucks, nominal pressure 10, nominal size 50, 80 and 100 - Part 3: Female coupling) |
DIN 28450-4-1996 |
罐车联管节.额定压力10.额定宽度50.80和100.第4部分:磁感联管节 |
(Couplings for tank trucks, nominal pressure 10, nominal size 50, 80 and 100 - Part 4: Female dust coupling) |
DIN 28450-5-1996 |
罐车联管节.额定压力10.额定宽度50.80和100.第5部分:VB型联轴节 |
(Couplings for tank trucks, nominal pressure 10, nominal size 50, 80 and 100 - Part 4: Male dust coupling) |
DIN 28450-6-1996 |
罐车联管节.额定压力10.额定宽度50.80和100.第6部分:单节软管接头 |
(Couplings for tank trucks, nominal pressure 10, nominal size 50, 80 and 100 - Part 6: One-piece hose coupling) |
DIN 28453-1-1987 |
油罐车联轴节用的量规.公称直径50.80和100的量规用于弧形联接件和栓塞.A1型量规 |
(Calibers for couplings for tank trucks, DN 50, DN 80 and DN 100 for curved piece and stopper; caliber A 1) |
DIN 28453-2-1987 |
油罐车联轴节用的量规.公称直径为50.80和100的量轨用于弧形联接件和栓塞.B1型量规 |
(Calibers for couplings for tank trucks, DN 50, DN 80 and DN 100 for curved piece and stopper; caliber B 1) |
DIN 28454-1-1987 |
油罐车联轴节用的量规.公称直径为50.80和100的量规用于密封环.A1型量轨 |
(Calibers for couplings for tank trucks, DN 50, DN 80 and DN 100 for sealing ring; caliber A 1) |
DIN 28454-2-1987 |
油罐车联轴节用的量规.公称直径为50.80和100的量规用于密封环.公称直径50和80的B1量规 |
(Calibers for couplings for tank trucks, DN 50, DN 80 and DN 100 for sealing ring; caliber B 1 for DN 50 and DN 80) |
DIN 28455-1987 |
油罐车联轴节用的量规.公称直径为50.80和100的张力环用的量规 |
(Calibers for couplings for tank trucks, DN 50, DN 80 and DN 100; caliber for former) |
DIN 28456-1987 |
油罐车联轴节用的量规.公称直径为50.80和100的罩用量规 |
(Calibers for couplings for tank trucks, DN 50, DN 80 and DN 100; caliber for bonnet) |
DIN 28459-1987 |
罐车用法兰.连接尺寸 |
(Flanges for tank trucks; mounting dimensions) |
DIN 28460-1987 |
罐车用法兰.铝管的焊接法兰 |
(Flanges for tank trucks; welding flanges for aluminium tubes) |
DIN 28461-1987 |
罐车用法兰.钢管的焊接平法兰 |
(Flanges for tank trucks; plain welding flanges for steel tubes) |
DIN 28462-1987 |
罐车用法兰.罐车接头用的螺纹法兰 |
(Flanges for tank trucks; threaded flanges for couplings for tank trucks) |
DIN 28463-1987 |
罐车附件的法兰.平密封垫 |
(Flanges for tank trucks; gaskets) |
DIN 2848-2002 |
钢制法兰管和有衬里的钢制及铸铁制法兰管件.PN10、PN25和PN40 |
(Flanged steel pipes and flanged steel or cast iron fittings with lining - PN 10, PN 25 and PN 40) |
DIN 28601-2000 |
韧性铸铁管道和配件.螺纹套管接头.组件,套管,螺丝环,密封环和滑动环 |
(Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings) |
DIN 28602-2000 |
球墨铸铁管及配件.螺栓压紧密封接头.组件、套管、计数器环、螺栓和螺母 |
(Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts) |
DIN 28603-2002 |
可锻铸铁管和配件.插塞套管连接件.组装、插入和密封 |
Ductile iron pipes and fittings - Push-in joints - Survey, sockets and gaskets |
DIN 28650-1999 |
可锻铸铁异型件.弯头30°EN件,MI件和IT件.使用,尺寸 |
Ductile iron fittings - Double socket 30?bends, EN-fittings, MI-fittings, IT-fittings - Application, dimensions |
DIN 2873-2002 |
法兰配件管和搪瓷凸缘钢.PN 10和PN 25 |
Flanged fitting pipes and flanged steel glass lined - PN 10 and PN 25 |
DIN 2874-2002 |
钢制法兰管和带PTFE或PFA衬里的钢制和铸铁法兰管件.技术规范 |
Steel flanged pipes and steel and cast iron flanged fittings lined with PTFE or PFA - Technical specifications |
DIN 2875-2002 |
带硬质或软质橡胶衬里的法兰钢管和法兰钢管件.技术规范 |
Flanged steel pipes and flanged steel fittings with hard or soft rubber lining - Technical specifications |
DIN 2876-2002 |
钢制法兰管和搪瓷钢制法兰管件.技术规范 |
Flanged steel pipes and flanged steel fittings glass lined - Technical specifications |
DIN 2880-1999 |
铸铁管,钢管和管件用水泥砂浆管线衬的应用 |
Application of cement mortar lining for cast iron pipes, steel pipes and fittings |
DIN 2908-1-1979 |
椭圆形塞.组装 |
Oval blank plugs; assembly |
DIN 2908-2-1979 |
椭圆形塞.零件 |
(Oval blank plugs; parts) |
DIN 2909-1-1979 |
圆形塞.组装 |
Round blank plugs; assembly |
DIN 2909-2-1979 |
圆形塞.零件 |
Round blank plugs; parts |
DIN 2914-1987 |
蒸汽锅炉耐压外壳的检查孔密封.设计.交货条件 |
Manhole blanking devices for pressure containing steam generator parts; design, conditions of delivery |
DIN 2916-1975 |
无缝和焊接钢管的弯曲半径.设计图纸 |
Bending Radii for Seamless and Welded Steel Tubes; Design Sheet |
DIN 2917-1982 |
热蒸汽管道和贮存器用无缝钢管 |
Seamless steel tubes for superheated steam pipelines and headers |
DIN 2921-1968 |
检查门450×450 |
Access openings 450 450 |
DIN 2922-1968 |
防爆门450×450 |
Explosion openings 450 450 |
DIN 2924-1972 |
蒸汽锅炉检查门500 |
(Access openings 500 for boilers) |
DIN 29502-1-1986 |
航空和航天.用织物强化的丙烯酸树脂有机玻璃制作的飞机窗玻璃的镶边.设计和加工准则 |
Aerospace; edge reinforcements for aircraft glazings of fabric reinforced acrylic resins; directives for design |
DIN 29505-1987 |
航空和航天.纤维增强塑料构件.图纸和构件表的说明 |
Aerospace; components of fibre reinforced plastics; indications in drawings and parts lists |
DIN 29531-1990 |
航空和航天.铝合金和镁合金铸件.交货的技术条件.不适于新结构 |
(Aerospace; castings of aluminium and magnesium alloys; technical specification) |
DIN 29543-1990 |
航空和航天.锻铝合金无缝承压管.交货技术条件.不适于新结构 |
(Aerospace; seamless internal pressure tubes in wrought aluminium alloys; technical specification; inactive for new design) |
DIN 29544-1990 |
航空和航天.无缝的铝管和精炼铝合金管.交货技术条件.不适于新结构 |
(Aerospace; seamless duct tubing of aluminium and wrought aluminium alloys; technical specification; inactive for new design) |
DIN 29546-1990 |
航空和航天.铝塑性合金薄片.板材和带材;交货的技术条件.不适于新结构 |
(Aerospace; wrought aluminium alloys sheet, plate and strip; technical specification; inactive for new design) |
DIN 29547-1990 |
航空和航天.锻铝合金制无缝管.交货技术条件.不适用于新结构 |
(Aerospace; seamless structural tubes in wrought aluminium alloys; technical specification; inactive for new design) |
DIN 29548-1-1993 |
航空和航天.楔型插件 |
(Aerospace; offsettings with wedge) |
DIN 29548-2-1993 |
航空和航天.无楔型插件 |
(Aerospace; offsettings without wedge) |
DIN 29548-3-1993 |
航空和航天.插件.结构说明和实例 |
(Aerospace; offsettings; directions for design and examples) |
DIN 29571-2-1992 |
航空和航天.电器设备.设备、仪器和导线识别标志 |
(Aerospace; electrical subsystems; identification of circuits, equipments and cables) |
DIN 29571-3-1990 |
航空和航天.电气设备.电能平衡 |
(Aerospace; electrical equipment; analysis of load and power source capacity) |
DIN 29576-1-1992 |
航空和航天.飞机上用电气系统.性能不适于新结构 |
(Aerospace; aircraft electrical systems; characteristics; inactive for new design) |
DIN 29576-2-1987 |
航空和航天.飞机上用电气系统.对飞机里敷设的电缆的检验 |
(Aerospace; aircraft electrical systems; testing of electrical cables installed in aircraft) |
DIN 29576-3-1991 |
航空和航天.飞机上电气系统.接外壳 |
(Aerospace, aircaft electrical systems; bonding) |
DIN 29576-4-1993 |
航空和航天.飞机上用电器系统.短路特性检验 |
(Aerospace, aircraft electrical systems; testing of short-circuit behaviour) |