标准号 |
中文名称 |
英文名称 |
| DIN V 4108-6-2003 |
建筑物的热防护和节能.第6部分:年需热能的计算 |
(Thermal protection and energy economy in buildings - Part 6: Calculation of annual heat and energy use) |
| DIN V 4108-6/A1-2001 |
建筑物中热防护和节能.第6部分:建筑物每年用能的计算 |
(Thermal insulation and energy economy in buildings - Part 6: Calculation of annual energy use for building; Amendment A1) |
| DIN V 4126-100-1996 |
隔墙.第100部分:按照带部件安全系数的方案计算 |
(Diaphragm walls - Part 100: Analysis in accordance with the partial safety factor concept) |
| DIN V 4141-1-2003 |
建筑业用支承.第1部分:设计总则 |
(Structural bearings - Part 1: General design rules) |
| DIN V 4141-13-1994 |
建筑业用轴承.固定结构和水平力轴承.结构设计和测量 |
(Structural bearings - Restraints and side thrust bearings - Design and construction) |
| DIN V 4165-100-2005 |
高压蒸养加气混凝土砌块.第100部分:具有特殊性能的高精度砌块和件 |
|
| DIN V 42331-2004 |
脉冲磁场的技术报告 |
|
| DIN V 44302-2-1994 |
数据交换.专业术语 |
(Data communication; terms) |
| DIN V 44366-2004 |
P&I图中过程控制工程要求的表示规范与P&ID工具和PCE-CAE工具之间数据交换规范(英文文本) |
|
| DIN V 44801-10-1998 |
α,γ和β射线的表面污染测量仪和监视仪.第10部分:α和β射线的固定安装的人员污染监视仪 |
(Surface contamination meters and monitors for alpha-, beta- and gamma-radiation - Part 10: Installed personnel surface contamination monitoring assemblies for alpha and beta radiation (IEC 61098:1992, modified)) |
| DIN V 45606-1989 |
助听器.模拟携带条件下位置移动时助听器性能的测量法 |
(Hearing aids; methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions; IEC 60118-3:1983 modified) |
| DIN V 45608-1992 |
空气传导助听器的声学测量用临时头部模拟器和躯干模拟器 |
(Provisional head and torso simulator for acoustic measurements on air conduction hearing aids; identical with IEC 60959:1990) |
| DIN V 45635-2107-1997 |
机器的噪声测量.空气声发散,包络面法.第2107部分:电动工具.冲击钻和冲击锤的附加规定 |
(Measurement of airborne noise emitted by machines - Enveloping surface method - Part 2107: Electric tools; additional specifications for drilling and chipping hammers) |
| DIN V 45673-3-2004 |
机械振动.铁路钢轨用弹性构件.第3部分:已安装轨道系统的人工激磁的介入损耗的实验评价(试验台和现场) |
|
| DIN V 45679-1998 |
机械振动.评定手臂装置振动负荷用的夹紧力和压紧力的测量和估算 |
(Mechanical vibration - Measurement and evaluation of the grip and feed forces for assessing the exposure of the hand-arm system to vibration) |
| DIN V 45688-1-1995 |
噪声和振动方面的试验站和咨询中心的认证和操作准则.第1部分:概述 |
(Criteria for accrediation and operation of testing laboratories and consulting companies in the field of sound and vibration - Part 1: General) |
| DIN V 45688-2-1995 |
噪声和振动方面的试验站和咨询中心的认定和操作准则.第2部分:机械声学 |
(Criteria for accrediation and operation of testing laboratories and consulting companies in the field of sound and vibration - Part 2: Machine-acoustics) |
| DIN V 45688-3-1995 |
噪声和振动方面的试验站和咨询中心的认定和操作准则.第3部分:工作场所和邻近区域的噪声 |
(Criteria for accrediation and operation of testing laboratories and consulting companies in the field of sound and vibration - Part 3: Noise at the work place and in the neighbourhood) |
| DIN V 45688-5-1997 |
噪声和振动方面的试验站和咨询中心的认定和操作准则.第5部分:机械制造,仪器仪表和建筑业中的振动 |
(Criteria for accreditation and operation of testing laboratories and consulting companies in the field of sound and vibration - Part 5: Vibration in mechanical engineering, equipment and construction) |
| DIN V 45688-6-1997 |
噪声和振动方面的试验站和咨询中心的认定和操作准则.第6部分:工作场地的振动 |
(Criteria for accreditation and operation of testing laboratories and consulting companies in the field of sound and vibration - Part 6: Vibration at the workplace) |
| DIN V 45695-1996 |
手臂振动.减少由于振动产生的危险的导则.技术和组织措施 |
(Hand-arm vibration - Guidelines for vibration hazards reduction - Engineering and management measures (CR 1030-1:1995 + CR 1030-2:1995)) |
| DIN V 4701-10 Bb.1-2002 |
加热和通风装置的能量评估.第10部分:使用标准件的优选装置系统的简图和规划辅助手段 |
() |
| DIN V 4701-10-2003 |
建筑物加热和通风系统的能效.第10部分:加热、家用热水供应、通风 |
(Energy efficiency of heating and ventilation systems in buildings - Part 10: Heating, domestic hot water supply, ventilation) |
| DIN V 4701-12-2004 |
现有建筑物中加热和通风装置的能量评价.第12部分:热和家用热水的产生 |
(Energetic evaluation of heating and ventilation systems in existing buildings - Part 12: Heat generation and domestic hot water generation) |
| DIN V 4701-12-2004 |
现有建筑物中加热和通风装置的能量评价.第12部分:热和家用热水的产生 |
|
| DIN V 4705-3-1997 |
烟囱尺寸的燃烧技术计算.第3部分:烟囱多层覆盖的计算方法 |
(Calculation of inside dimensions of chimneys - Part 3: Calculation method for multi-covered chimneys) |
| DIN V 4706-1-1993 |
盖顶辐射板.检验规则 |
(Ceiling mounted radiant panels; test specifications) |
| DIN V 4706-2-1995 |
盖顶辐射板.第2部分:热能换算 |
(Ceiling mounted radiant panels - Part 2: Thermal conversion) |
| DIN V 4753-8-1996 |
饮用水和工业用水的水加热器和加热设备.第8部分:1000I(含1000I)额定容器以下的水加热器的隔热性.要求和检验 |
(Water heaters and water heating installations for drinking water and for service water - Part 8: Thermal insulation for water heaters with nominal capacity up to 1000 l - requirements and testing) |
| DIN V 4759-2-1986 |
多种能源用热发生设备.带电驱动压缩极的热泵和二进传动暖气设备连结 |
(Heating installations for different sources of energy; use of heat pumps including electrically operated compressors in bivalent heating installations) |
| DIN V 49916-2002 |
频率控制和选择用压电和介电装置.术语汇编.压电和介电过滤器 |
(Piezoelectric and dielectric devices for frequency control and selection - Glossary - Piezoelectric and dielectric filters (IEC/TS 61994-2:2000)) |
| DIN V 51408-2-1987 |
矿物油碳氢化合物检验.氯含量测定.用氧化法测定微电解电量 |
(Testing of mineral oil hydrocarbons; determination of chlorine content; microcoulometric determination, oxidation method) |
| DIN V 51606-1994 |
液体燃料.植物油甲脂制柴油.最低要求 |
(Liquid fuels; diesel fuel of vegetable oil methylester (PME); requirements) |
| DIN V 51897-2000 |
气体分析.定义和解释 |
(Gas analysis - Definitions and explanations) |
| DIN V 52018-1994 |
沥青检验.加热室中的热应力.测定因热应力造成的重量变化. |
(Testing of bitumen; thermal effect in an oven and determination of change in mass by thermal effect) |
| DIN V 52021-1-1994 |
沥青检验.测定弹性复位的半丝线方法.改良聚合沥青 |
(Testing of bitumen; half thread method for the determination of the elastic recovery; polymer modified bitumen) |
| DIN V 52021-2-1994 |
沥青检验.测定弹性复位的半丝线法.表面处理用改良型聚合粘结剂 |
(Testing of bitumen; half thread method for the determination of the elastic recovery; polymer modified binders for surface dressing) |
| DIN V 52022-1994 |
沥青检验.表面处理用聚合改良粘合剂固定强度的测定 |
(Testing of bitumen; determination of fixation strength of polymermodified binders for surface treatments) |
| DIN V 52041-2-1994 |
沥青检验.连结材料回收法.聚合改良沥青乳剂的回收 |
(Testing of bitumen; method for the recuperation of binder out of polymermodified bitumen emulsions) |
| DIN V 52049-1998 |
沥青的检验.含沥青乳剂中水含量的测定.干燥法 |
(Testing of bitumen - Determination of water content of bituminous emulsions - Drying test) |
| DIN V 52101-2002 |
天然石和矿物集料的检验.水力工程用石的取样 |
(Testing of natural stone and mineral aggregates - Sampling of armourstones) |
| DIN V 52106-1994 |
天然石料和石材粒度的检验.判定耐风化的研究方法 |
(Testing of natural stone and mineral aggregates - Test methods for the assessment of the weathering resistance) |
| DIN V 52144-1995 |
密封面.沥青和聚合沥青面.工厂内部的生产管理 |
(Flexible sheets for waterproofing - Bitumen and polymerbitumen sheeting - Manufacturer`s internal control) |
| DIN V 52252-3-2005 |
磨光盖面粘土砖和熔渣砖的耐霜冻性测定的试验方法.第3部分:测试壁的单面冷动 |
|
| DIN V 53160-1-2002 |
通用物品色牢度的测定.第1部分:耐人工唾液性 |
(Determination of the colourfastness of articles for common use - Part 1: Resistance to artificial saliva) |
| DIN V 53160-2-2002 |
通用物品色牢度的测定.第1部分:耐人工汗液 |
(Determination of the colourfastness of atricles in common use - Part 2: Resistance to artificial sweat) |
| DIN V 53775-1-1996 |
塑料着色剂试验.增塑聚氯乙烯(PVC-P)材料中着色剂试验.第1部分:成份和基混料制备 |
(Testing of colouring materials in plastics - Testing of colouring materials in plasticized polyvinyl chloride (plasticized PVC) materials - Part 1: Composition and preparation of basic mixtures) |
| DIN V 54180-3-1997 |
无损检验.剪切图示.第3部分:管道检验 |
(Non-destructive testing - Shearography - Part 3: Testing of pipelines) |
| DIN V 54461-1994 |
胶粘剂.塑料与金属的胶粘检验.弯取脱皮试验 |
(Adhesives; testing of bonded adhesives of plastic and metal; bending peel test) |
| DIN V 54462-1998 |
胶粘剂.胶粘剂导热性能的测定 |
(Adhesives - Determination of thermal conductivity of bonded joints) |
| DIN V 54463-2000 |
纸和纸板,包装和一次性卫生产品用胶粘剂.潜在适于粘结的薄膜的摩擦特性的测定 |
(Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potential suitable for bonding) |
| DIN V 54900-1-1998 |
塑料可混合性检验.第1部分:化学检验 |
(Testing of the compostability of plastics - Part 1: Chemical testing) |
| DIN V 54900-2-1998 |
塑料混合性能检验.第2部分:在实验室实验中塑料全生物可降解性检验 |
(Testing of the compostability of plastics - Part 2: Testing of the complete biodegradability of plastics in laboratory tests) |
| DIN V 54900-3-1998 |
塑料混合性能检验.第3部分:实际的重要条件下的检验和混合物质量检验 |
(Testing of the compostability of plastics - Part 3: Testing under practice-relevant conditions and testing of quality of the composts) |
| DIN V 55390-1999 |
被任命为检验站的站点的一般要求 |
(General requirements for bodies providing accreditation of inspection bodies (ISO/IEC TR 17010:1998)) |
| DIN V 55391-2003 |
合格评定结果的认可和验收协议 |
(Arrangements for the recognition and acceptance of conformity assessment results (ISO/IEC Guide 68:2002)) |
| DIN V 55394-1-2000 |
用实验室间比较法进行熟练检验.第1部分:实验室熟练检验方法的制定及运用 |
(Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes (ISO/IEC Guide 43-1:1997)) |
| DIN V 55394-2-2000 |
用实验室间比较法进行熟练检验.第2部分:实验室认证机构对实验室熟练检验方法的选择及运用 |
(Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997)) |
| DIN V 55650-1998 |
漆和类似涂层材料用粘合剂.术语和定义 |
(Binders for paints and varnishes - Terms and definitions) |
| DIN V 5566-1-2000 |
铁路车辆.驾驶室.第1部分:通用要求 |
(Railway vehicles - Driver cabs - Part 1: Common requirements) |
| DIN V 5566-2-2000 |
铁路车辆.驾驶室.第2部分:准轨EBO车辆的附加要求 |
Railway vehicles - Driver cabs - Part 2: Additional requirements for standard gauge EBO-vehicles |
| DIN V 5566-3-2000 |
铁路车辆.驾驶室.第3部分:城市运输用铁路车辆的附加要求 |
Railway vehicles - Driver cabs - Part 3: Additional requirements for railway vehicles for urban transport |
| DIN V 58000-1-1992 |
集成光学.概念和零件分类.概念 |
Integrated optics; definitions and component classification; terms |
| DIN V 58000-2-1993 |
集成光学.概念和零件分类,零件分类 |
Integrated optics; definitions and component classification; component classification |
| DIN V 58001-1995 |
集成光学.与连接相关的性能和衰减.符号.优选尺寸.公差及衰减等级 |
Integrated optics - Parameters relevant to coupling properties, attenuation - Terms, preferred dimensions, tolerance and attenuation classes |
| DIN V 60500-1-1999 |
土工织物和相关产品.安装时抗损坏性能的测定(金字塔试验) |
Geotextiles and geotextile related products - Determination of the resistance against damage during installation (Pyramid drop test) |
| DIN V 61010-1998 |
纺织品.住宅区用装饰纺织材料.最低要求和检验(建议作为欧洲标准) |
(Textiles - Upholstery fabrics for use in living areas - Minimum requirements and tests (Proposal for a European Standard)) |
| DIN V 65900-11-2001 |
航空航天.螺丝和螺栓.材料(AECMA技术报告TR3775:1999) |
(Aerospace series - Bolts and pins - Materials (AECMA Technical Report TR 3775:1999)) |
| DIN V 65900-12-1997 |
航空和航天.金属材料.尺寸标准和材料标准之间的相互参照关系 |
(Aerospace series - Metallic matrials - Relationship between dimensional standards and material standards (AECMA Technical Report TR 2410:1996)) |
| DIN V 65900-13-1998 |
航空和航天.液体和气体介质的软管和软管管道的设计及结构.安装 |
(Aerospace series - Design and construction of flexible hoses and hose assemblies for fluids in liquid and gaseous condition - Installation (AECMA Technical Report TR 2675:1996 + Corrigendum 1997)) |
| DIN V 65900-14-1998 |
航空和航天.液体和气体介质用管道的设计和结构.管线和安装 |
(Aerospace series - Design and construction of pipeline for fluids in liquid or Gaseous condition - Rigid lines, installation (AECMA Technical Report TR 2674:1997)) |
| DIN V 65900-15-1999 |
航空和航天.温度等级≤425℃用自锁定螺母,螺纹插件和丝扣螺纹插件用材料 |
(Aerospace series - Materials for self-locking nuts, threaded inserts and screw thread inserts of temperature classes425 C (AECMA Technical Report TR 3791:1999)) |
| DIN V 65900-16-1998 |
航空和航天.六角螺母,冠状螺母和带塑料环的自锁定六角螺母用材料 |
(Aerospace series - Materials for plain, slotted and self-locking by plastic ring hexagonal nuts (AECMA Technical Report TR 3823:1998)) |
| DIN V 65900-17-2001 |
航空航天.O形环槽.O形环槽的基本计算和设计标准 |
(Aerospace series - O-ring grooves - Design criteria for O-ring grooves, basic calculations (AECMA Technical Report TR 4271:2000)) |
| DIN V 65900-18-2001 |
航空航天.自锁十二角螺母.扭矩技术规范.基本计算 |
(Aerospace series - Nuts, bihexagonal, self-locking - Torque for technical specifications - Basic calculations (AECMA Technical Report TR 4597:2000)) |
| DIN V 65900-19-2001 |
航空航天.弹簧拉力夹.设计推荐 |
(Aerospace series - Clips, spring tension - Design recommandations (AECMA Technical Report TR 4586:2000)) |
| DIN V 65900-20-2001 |
航空航天.弹簧拉力夹.装配推荐 |
(Aerospace series - Clips, spring tension - Assembly recommandations (AECMA Technical Report TR 4587:2000)) |
| DIN V 65900-3-1992 |
航空和航天.自锁式线螺纹插件的使用和选择 |
(Aerospace series; use and selection of self-locking wire thread inserts; identical with AECMA-technical report TR 3540:1992) |
| DIN V 65900-4-1993 |
航空和航天.金属材料.AECMA材料标识系统的关系 |
(Aerospace series; metallic materials; relationship between AECMA designation systems; identical with AECMA-technical report TR 3900:1993) |
| DIN V 65900-5-1994 |
航空和航天.带法兰的管连接件.安装建议 |
(Aerospace series; fluid fittings, flanged; assembly recommendations; identical with AECMA-Technical Report TR 3634:1993) |
| DIN V 65900-6-1995 |
航空和航天.带松动法兰和钛合金平面密封材料的管连接件.安装建议 |
(Aerospace series - Pipe couplings, loose flanges and seals, in titanium alloyAssembly recommendations (AECMA Technical Report TR 4053:1994)) |
| DIN V 65900-7-1995 |
航空和航天.带钛合金制60度球型套管的管螺纹连接件.安装建议 |
(Aerospace series - Pipe couplings 60 , spherical, in titanium alloy - Assembly recommendations (AECMA Technical Report TR 4052:1995)) |
| DIN V 65900-8-1995 |
航空和航天.弹簧式三节管夹.安装建议 |
(Aerospace series - Clips, spring tension, three parts - Assembly recommendations (AECMA Technical Report TR 4169:1995)) |
| DIN V 65900-9-1996 |
航空和航天.电气和光学连接件.EN2591各部分标准号系统间的互相参照 |
(Aerospace series - Elements of electrical and optical connection - Relationsship between the numbering systems for parts of EN 2591 (AECMA Technical Report TR 4257:1995)) |
| DIN V 66221-5-1995 |
高水平数字连接控制程序(HDLC).第5部分:在标准中已使用的HDLC等级表和XID分程序中格式标识表 |
(High-level data link control (HDLC) procedures - Part 5: List of standards that utilize HDLC classes of procedures and list of format identifiers in XID frames; identical with ISO/IEC TR 10171:1994) |
| DIN V 66291-1-2000 |
根据信号G和信号V的数字信号应用/功能的存储芯片.第1部分:应用接口 |
(Chipcards with digital signatur application/function according to SigG and SigV - Part 1: Application interface) |
| DIN V 66291-2-2003 |
根据信号G和信号V的具有数字签名应用/功能的存储芯片.第2部分:个性化过程 |
(Chip cards with digital signature application/function according to SigG and SigV - Part 2: Personalisation processes) |
| DIN V 66291-3-2003 |
根据信号G和信号V的具有数字签名应用/功能的存储芯片.第3部分:个性化命令 |
(Chip cards with digital signature application/function according to SigG and SigV - Part 3: Commands for personalisation) |
| DIN V 66291-4-2002 |
根据信号G和信号V有数字签名应用/功能的存储芯片.第4部分:基本安全设备 |
(Chip cards with digital signature application/function according to SigG and SigV - Part 4: Basic security services) |
| DIN V 66304 Bb.2-1993 |
工业自动化.计算机辅助设计.标准件数据交换的格式.原理图用草图 |
(Industrial automation; Computer Aided Design; format for the exchange of standard parts data; express-scheme for schematic representation) |
| DIN V 66353-2002 |
儿童保护用品.带反转扶手的摇篮和椅状婴儿车.要求和试验 |
(Child care articles - Prams and push chairs with reversable handles - Requirements and tests) |
| DIN V 66400-2003 |
卡上匹配用指纹编码格式和参数 |
(Finger minutiae encoding format and parameters for on-card matching) |
| DIN V 66401-2005 |
UIM.唯一识别标记.使用矩阵符号的极小项的应用要求 |
|
| DIN V 6862-2-1995 |
医学诊断中拍片的识别和标识.用数字扫描术,数字减像血管造影术和计算机X线断层照相术拍片 |
(Identification and characterization of radiological images in medical diagnosis - Digital imaging with digital radiography, digital subtraction angiography and computerized tomography) |
| DIN V 6868-12-1996 |
X光诊断照片的质量保证.第12部分:照片文献系统的稳定性试验 |
(Image quality assurance in X-ray diagnostics - Part 12: Constancy tests for hard copy cameras) |
| DIN V 6868-151-2002 |
X光诊断照片的质量保证.第151部分:牙科X射线设备的验收检验.安装、维修和改进后照片质量的检查原则 |
(Image quality assurance in X-ray diagnostics - Part 151: Acceptance testing of dental radiographic equipment; Rules for the inspection of image quality after installation, maintenance and modification) |
| DIN V 6868-152 Berichtigung 1-2003 |
对DINV6868-152:2003-04的勘误 |
(Corrigenda to DIN V 6868-152:2003-04) |
| DIN V 6868-152-2003 |
X光诊断部门的照片质量保证.第152部分:乳腺X射线设备的验收检验 |
(Image quality assurance in diagnostic X-ray departments - Part 152: Acceptance testing of mammographic X-ray equipment) |
| DIN V 6868-152-2005 |
X光诊断部门的图像质量保证.第152部分:乳腺X射线摄影设备的验收检验 |
|
| DIN V 6868-55-1996 |
X光诊断照片的质量保证.第55部分:医疗X射线设备的验收检验.胶片处理的功能检验 |
(Image quality assurance in X-ray diagnosis - Part 55 Acceptance testing in direct radiographic and fluoroscopic X-ray-systems including film processing) |
| DIN V 6868-57-2001 |
X光诊断图像的质量保证.第57部分:图像显示装置的验收试验 |
(Image quality assurance in diagnostic X-ray departments - Part 57: Acceptance testing for image display devices) |
| DIN V 6868-58-2001 |
X光诊断图像的质量保证.第58部分:带数字图像接收器的X射线投影系统的验收试验 |
(Image quality assurance in diagnostic X-ray departments - Part 58: Acceptance testing of projection radiography systems with digital image receptors) |
| DIN V 68874-2-2004 |
储藏柜家具的搁板和搁板支撑.第2部分:搁板支撑的要求和试验 |
|
| DIN V 69063-5-1996 |
机床.锥形空心柄夹具.第5部分:符合DIN69893的E型夹具.连接尺寸 |
(Machine tools - Tool receiver for hollow taper shanks - Part 5: For type E according to DIN 69893; connecting dimensions) |
| DIN V 69893-5-1996 |
带平端面的锥形空心柄.第5部分:E型锥形空心柄.尺寸 |
(Hollow taper shanks with flat contact surface - Part 5: Hollow taper shanks type E; dimensions) |
| DIN V 70070-2003 |
柴油发动机.NO-还原添加剂AUS32.要求和试验方法 |
(Diesel engines - NO-reduction additives AUS 32 - Requirements and test methods) |
| DIN V 70071-2005 |
柴油发动机.NOx还原剂AUS 32.试验方法 |
|
| DIN V 74051-10-1989 |
载重汽车和拖车的机械连接件.自动螺栓联轴器40.中心轴挂车牵引的说明 |
(Mechanical connections between towing vehicles and trailers; automatic bolt coupling 40; additional specifications for the use with centre axle trailers) |
| DIN V 74052-10-1989 |
载重汽车和拖车的机械连接件.自动螺栓联轴器50.中心轴挂车牵引的附加说明 |
(Mechanical connections between towing vehicles and trailers; automatic bolt coupling 50; additional specifications for the use with centre axle trailers) |
| DIN V 74053-10-1989 |
载重汽车和拖车的机械连接件.带衬套的牵引圈环50.使用中心轴挂车的附加说明 |
(Mechanical connections betweeen towing vehicles and trailers; drawbar eye 50 with sleeve; additional specifications for applications on centre axle trailers) |
| DIN V 74054-10-1989 |
载重汽车和拖车的机械连接件.带衬套的牵引圈环40.使用中心轴挂车的附加说明 |
(Mechanical connections between towing vehicles and trailers; drawbar eye 40 with sleeve; additional specifications for applications on centre axle trailers) |
| DIN V 78082-2-1991 |
橡胶工业原料.苯乙烯-丁二烯橡胶.要求 |
(Raw materials for the rubber industry; styrene-butadiene rubber; requirements) |
| DIN V 80004-2001 |
造船相关的术语,定义和缩写.概览.德文和英文 |
(Shipbuilding related terms and definitions and abbreviations - Survey, German and English) |
| DIN V 81833-1999 |
锚链设备件.概览 |
(Components for anchoring equipment - Survey) |
| DIN V 81841-1999 |
锚链钢缆级K4.要求和检验 |
(Anchor chain cables grade K4 - Requirements and test) |
| DIN V 81846-1999 |
锚链钢缆级K4.组装,检验和断裂力 |
(Anchor chain cables grade K4 - Assembly, proof- and breaking forces) |
| DIN V 81847-1999 |
锚链钢缆级K4.链条长度 |
(Anchor chain cables grade K4 - Shots of chaim cable) |
| DIN V 81848-1999 |
锚链钢缆级K4.标准链节 |
(Anchor chain cables grade K4 - Common links) |
| DIN V 81849-1999 |
锚链质量等级K4.连接链节 |
(Anchor chain cables grade K4 - Enlarged links) |
| DIN V 81850-1999 |
锚链质量等级K4.端部链节 |
(Anchor chain cables grade K4 - End links) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com