标准号 |
中文名称 |
英文名称 |
| DIN EN 62044-3-2001 |
软磁性材料制成的磁芯.测量方法.第3部分:高冲击水平的磁化特性 |
(Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level (IEC 62044-3:2000); German version EN 62044-3:2001) |
| DIN EN 62052-21-2005 |
电量测量设备(交流).一般要求、试验和试验条件.第21部分:电费和负荷控制设备 |
|
| DIN EN 62053-31-1999 |
电能测定设备(AC).特殊要求.第31部分:感应计数器或电子计数器(只限于双线系统)用脉冲输出装置 |
(Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only) (IEC 62053-31:1998); German version EN 62053-31:1998) |
| DIN EN 62053-61-1999 |
电能测定设备(AC).特殊要求.第61部分:功率消耗和电压要求 |
(Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements (IEC 62053-61:1998); German version EN 62053-61:1998) |
| DIN EN 62054-11-2005 |
电量测量(交流).电费和负荷控制.第11部分:电子脉动控制接收器的特殊要求 |
|
| DIN EN 62054-21-2005 |
电量测量(交流).电费和负荷控制.第21部分:计时开关的特殊要求 |
|
| DIN EN 62056-21-2003 |
电量测量.抄表、电费和负载控制的数据交换.第21部分:局域数据直接交换 |
(Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange (IEC 62056-21:2002); German version EN 62056-21:2002, text in english) |
| DIN EN 62056-31-2000 |
电度表.电表读数,计费,和负载控制的数据交换.第31部分:弯曲成对的带载波信号的局域网的使用 |
(Electricity metering - Data exchange for meter reading, tariff and load control - Part 31: Use of local area networks on twisted pair with carrier signalling (IEC 62056-31:1999); German version EN 62056-31:2000) |
| DIN EN 62056-42-2003 |
电量测量.抄表、电费和负载控制的数据交换.第42部分:定向连接异步数据交换规程和物理层服务 |
(Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange (IEC 62056-42:2002); German version EN 62056-42:2002, text in english) |
| DIN EN 62056-46-2003 |
电量测量.抄表、电费和负载控制的数据交换.第46部分:使用HDLC协议的数据链路层 |
(Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol (IEC 62056-46:2002); German version EN 62056-46:2002, text in english) |
| DIN EN 62056-53 Berichtigung 1-2003 |
对DINEN62056-53:2003-01的勘误 |
(Corrigenda to DIN EN 62056-53:2003-01) |
| DIN EN 62056-53-2003 |
电量测量.抄表、电费和负载控制的数据交换.第53部分:COSEM应用层 |
(Electricity metering - Data exchange for meter reading, tariff and load control - Part 53: COSEM application layer (IEC 62056-53:2002); German version EN 62056-53:2002, text in English) |
| DIN EN 62056-61-2003 |
电量测量.抄表、电费和负载控制的数据交换.第61部分:目标识别系统(OBIS) |
(Electricity metering - Data exchange for meter reading, tariff and load control - Part 61: Object identification system (OBIS) (IEC 62056-61:2002); German version EN 62056-61:2002, text in english) |
| DIN EN 62056-62-2003 |
电量测量.抄表、电费和负载控制的数据交换.第62部分:接口分级 |
(Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interface classes (IEC 62056-62:2002); German version EN 62056-62:2002, text in English) |
| DIN EN 62065-2003 |
海上导航及无线电通信设备和系统.航线控制系统.操作和性能要求、试验方法及要求的试验结果 |
(Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results (IEC 62065:2002); German version EN 62065:2002) |
| DIN EN 62068-1-2004 |
电绝缘系统.重复脉冲引起的电应力.第1部分:评价电气耐久性的一般方法 |
|
| DIN EN 62070-2001 |
广播数字视频磁带记录仪.记录和再产生错误识别方法 |
(Broadcast digital video tape recorders - Identification method for recording and/or reproduction error status (IEC 62070:2001); German version EN 62070:2001) |
| DIN EN 62071-2001 |
用6,35mm磁带的垂直扫描压缩数字视频记录系统.D-7格式 |
(Helical-scan compressed digital video cassette recording system using 6,35 mm magnetic tape - Format D-7 (IEC 62071:2000); German version EN 62071:2001) |
| DIN EN 62077-2002 |
光纤循环器.通用规范 |
(Fibre optic circulators - Generic specification (IEC 62077:2001); German version EN 62077:2001) |
| DIN EN 62079-2001 |
说明书的准备.结构,内容和表示 |
(Preparation of instructions - Structuring, content and presentation (IEC 62079:2001); German version EN 62079:2001) |
| DIN EN 62083-2002 |
医用电气设备.放射治疗计划系统的安全要求 |
(Medical electrical equipment - Requirements for the safety of radiotheraphy treatment planning systems (IEC 62083:2000); German version EN 62083:2001) |
| DIN EN 62087-2004 |
音频、视频及相关设备的耗电量测量方法 |
(Methods of measurement for the power consumption of audio, video and related equipment (IEC 62087:2002); German version EN 62087:2003) |
| DIN EN 62087-2004 |
音频、视频及相关设备的耗电量测量方法 |
|
| DIN EN 62090-2003 |
使用条形码和二维符号的电子器件用产品包装标签 |
(Product package labels for electronic components using bar code and two-dimensional symbologies (IEC 62090:2002); German version EN 62090:2003) |
| DIN EN 62092-2002 |
超声.水听器.15～40MHz工作频率的特性和校准 |
(Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from 15 MHz to 40 MHz (IEC 62092:2001); German version EN 62092:2001) |
| DIN EN 62093-2005 |
光电系统的系统平衡部件.设计鉴定自然环境 |
|
| DIN EN 62094-1/A11-2004 |
家用和类似用途的固定电气设施的指示灯部件.第1部分:一般要求.修改件A11 |
|
| DIN EN 62099-2002 |
纤维光学波长开关.总规范(IEC62099:2001) |
(Fibre optic wavelength switches - Generic specification (IEC 62099:2001); German version EN 62099:2001) |
| DIN EN 621-2002 |
无风扇支持燃烧气体和/或燃烧物质传输、净热输入功率不超过300kW的空间加热用非家用燃气式强制对流空气加热 |
(Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products (includes Amendment A1:2001); German version EN 621:1998 |
| DIN EN 62106-2002 |
频率范围在87,5-108,0MHZ的VHF/FM声音播放用的无线电数据系统规范 |
(Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz (IEC 62106:2000); German version EN 62106:2001) |
| DIN EN 62107-2001 |
高级激光视盘.光盘交换系统.规范 |
(Super video compact disc - Disc-interchange system-specification (IEC 62107:2000); German version EN 62107:2001) |
| DIN EN 62114-2002 |
电气绝缘系统.热分类 |
(Electrical insulation systems (EIS) - Thermal classification (IEC 62114:2001); German version EN 62114:2001) |
| DIN EN 62121-2002 |
小型光盘录制/播放设备的测量方法 |
(Methods of measurement for minidisc recorders/players (IEC 62121:2001); German version EN 62121:2001) |
| DIN EN 62122-2002 |
家用数字磁带录像机(VTRs)的测试方法.电和机械特性 |
(Methods of measurement for consumer-use digital VTRs - Electronic and mechanical performances (IEC 62122:2002); German version EN 62122:2002) |
| DIN EN 62124-2005 |
光电独立系统.设计检定 |
|
| DIN EN 62133-2003 |
含碱性或其它非酸性电解液的蓄电池和蓄电池组.便携式密封蓄电池和蓄电池组的安全要求 |
(Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications (IEC 62133:2002); German version EN 62133:2003) |
| DIN EN 62134-1-2002 |
光纤附件.第1部分:总规范 |
(Fibre optic enclosures - Part 1: Generic specification (IEC 62134-1:2002); German version EN 62134-1:2002) |
| DIN EN 62137-2005 |
环境和耐久性试验.区域阵列式包装件表面安装板的试验方法FBGA、BGA、FLGA、LGA、SON和QFN |
|
| DIN EN 62148-1-2003 |
光纤有源件及器件.包装和接口标准.第1部分:总则和指南 |
(Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance (IEC 62148-1:2002); German version EN 62148-1:2002) |
| DIN EN 62148-11-2004 |
纤维光学有源件及器件.包装和接口标准.第14部分:14针集成调制器激光二极管发射器 |
|
| DIN EN 62148-12-2004 |
光纤有源件及器件.包装和接口标准.第12部分:带同轴RF连接器的激光发射机 |
|
| DIN EN 62148-4-2004 |
纤维光学有源件及器件.包装和接口标准.第4部分:PN1x9塑料光纤无线电收发信机 |
(Fibre optic active components and devices - Package and interface standards - Part 4: PN 1x9 plastic optical fibre transceivers (IEC 62148-4:2003); German version EN 62148-4:2003) |
| DIN EN 62148-4-2004 |
纤维光学有源件及器件.包装和接口标准.第4部分:PN 1x9塑料光纤无线电收发信机 |
|
| DIN EN 62148-6-2004 |
纤维光学有源件及器件.包装和接口标准.第6部分:ATM-PON无线电收发信机 |
|
| DIN EN 62149-1-2004 |
纤维光学有源件和器件.性能标准.第1部分:总则和指南 |
|
| DIN EN 62149-3-2004 |
纤维光学有源件和器件.性能标准.第3部分:2.5Gbit/s调制器-集成激光二极管发射机 |
|
| DIN EN 62149-5-2004 |
纤维光学有源件及器件.性能标准.第5部分:带LD驱动和CDR IC的ATM-PON无线电收发信机 |
|
| DIN EN 62149-6-2004 |
纤维光学有源件及器件.性能标准.第6部分:650-nm 250-Mbit/s塑料光纤无线电收发信机 |
|
| DIN EN 62150-1-2005 |
纤维光学有源件和器件.试验和测量规程.第1部分:总则和指南(IEC 62150-1-2005)；德文版本 EN 62150-1-2005 |
|
| DIN EN 62150-2-2005 |
纤维光学有源件和器件.试验和测量规程.第2部分:ATM-POM无线电收发信机 |
|
| DIN EN 62153-1-1-2004 |
金属通信电缆试验方法.第1-1部分:电气.用离散傅里叶逆变换测量频域中的脉冲/分步回程损失 |
|
| DIN EN 62153-4-2-2004 |
金属通信电缆试验方法.第4-2部分:电磁兼容性(EMC).屏蔽和耦合衰减.注入夹紧法 |
|
| DIN EN 62155-2004 |
额定电压高于1000V的电气设备用空心加压和非加压陶瓷和玻璃绝缘子 |
|
| DIN EN 62156-2002 |
视频压缩12.56mm型D-9件格式525/60和625/50的数字视频录制 |
(Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (digital S) (IEC 62156:2001); German version EN 62156:2001) |
| DIN EN 62193-2004 |
带电作业.伸缩式带电作业杆和可伸缩测量尺 |
|
| DIN EN 62196-1-2004 |
插头、插座、车辆耦合器和引入线.电动车辆的传导充电.250 A a.c.和400 A d.c.及以下的电动车辆的充电 |
|
| DIN EN 622-1-1997 |
纤维板.要求.第1部分:一般要求 |
(Fibreboards - Specifications - Part 1: General requirements; German version EN 622-1:1997) |
| DIN EN 622-2-1997 |
纤维板.要求.第2部分:对硬板的要求 |
(Fibreboards - Specifications - Part 2: Requirements for hardboards; German version EN 622-2:1997) |
| DIN EN 622-2-2004 |
纤维板.规范.第2部分:硬质纤维板的要求 |
|
| DIN EN 622-3-1997 |
纤维板.要求.第3部分:对中硬板的要求 |
(Fibreboards - Specifications - Part 3: Requirements for medium boards; German version EN 622-3:1997) |
| DIN EN 622-3-2004 |
纤维板.规范.第3部分:中硬度板的要求 |
|
| DIN EN 622-4-1997 |
纤维板.要求.第4部分:对多孔板的要求 |
(Fibreboards - Specifications - Part 4: Requirements for softboards; German version EN 622-4:1997) |
| DIN EN 622-5-1997 |
纤维板.要求.第5部分:对按干燥法(MDF)加工的板的要求 |
(Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF); German version EN 622-5:1997) |
| DIN EN 62211-2004 |
电感件.可靠性管理 |
|
| DIN EN 62216-1-2003 |
数字化视频广播系统DVB-T用数字地面接收机.第1部分:基线接收机规范 |
(Digital terrestrial television receivers for the DVB-T system - Part 1: Baseline receiver specification (IEC 62216-1:2001); German version EN 62216-1:2002) |
| DIN EN 62219-2003 |
架空电力导线.带同心绞线的成形导线 |
(Overhead electrical conductors - Formed wire, concentric lay, stranded conductors (IEC 62219:2002); German version EN 62219:2002) |
| DIN EN 62220-1-2005 |
医疗电气设备.数字X射线制图设备的特性.第1部分:等效量子效率的测定 |
|
| DIN EN 62226-1-2005 |
曝露于低频和中频电场或磁场.人体内感应的电流密度和内电场的计算方法.第1部分:总则 |
|
| DIN EN 62237-2005 |
带电作业.液压工具和设备用带配件的绝缘软管 |
|
| DIN EN 62246-1-2003 |
簧片触点.第1部分:总规范 |
(Reed contacts unit - Part 1: Generic specification (IEC 62246-1:2002); German version EN 62246-1:2002) |
| DIN EN 62252-2005 |
海上导航和无线电通信设备和系统.不与IMO SOLAS第V章相符的船用雷达.性能要求、试验方法和要求的试验结果 |
|
| DIN EN 62258-2-2005 |
半导体压模产品.第2部分:数据交换格式(IEC 62258-2-2005)；德文版本 EN 62258-2-2005.英文文本 |
|
| DIN EN 62259-2004 |
含有碱性或其他非酸性电解质的蓄电池和蓄电池组.部分气体再混合的镍-镉方形二次单电池 |
|
| DIN EN 62271-100-2004 |
高压开关设备和控制设备.第100部分:高压交流断路器 |
|
| DIN EN 62271-2-2004 |
高压开关设备和控制设备.第2部分:额定电压72.5kV及以上的地震特性 |
(High-voltage switchgear and controlgear - Part 2: Seismic qualification for rated voltages of 72,5 kV and above (IEC 62271-2:2003); German version EN 62271-2:2003) |
| DIN EN 62271-2-2004 |
高压开关设备和控制设备.第2部分:额定电压72.5kV及以上的地震特性 |
|
| DIN EN 62271-200-2004 |
高压开关设备和控制设备.第200部分:额定电压大于1kV小于等于52 kV的交流金属封闭式开关设备和控制设备 |
|
| DIN EN 62271-203-2004 |
高压开关设备和控制设备.第203部分:额定电压在52 kV以上的气体绝缘金属封闭开关 |
|
| DIN EN 62281-2005 |
运输途中原电池和二次锂电池及蓄电池组的安全 |
|
| DIN EN 62282-2-2005 |
燃料电池技术.第2部分:燃料电池模件 |
|
| DIN EN 62282-2-2005 |
燃料电池技术.第2部分:燃料电池模件 |
|
| DIN EN 62286-2004 |
消费者电子产品和网络用服务诊断接口.IEEE 1394的执行 |
|
| DIN EN 62289-2004 |
视频记录.使用12.65mm磁带并混用MPEG-2压缩格式D-10的螺旋扫描数字盒式录像带的录制格式 |
(Video recording - Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression format D-10 (IEC 62289:2002); German version EN 62289:2003) |
| DIN EN 62289-2004 |
视频记录.使用12.65mm磁带并混用MPEG-2压缩格式D-10的螺旋扫描数字盒式录像带的录制格式 |
|
| DIN EN 62298-3-2005 |
电视网应用.第3部分:超图文电视轮廓 |
|
| DIN EN 623-1-1995 |
高技术陶瓷.整块陶瓷.一般性能和结构性能.第1部分:用着色剂渗透试验检验存在的表面缺陷 |
(Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 1: Determination of the presence of defects by dye penetration tests; German version EN 623-1:1995) |
| DIN EN 623-2-1993 |
高技术陶瓷.整块陶瓷.一般性能和结构性能.第2部分:密度和孔隙度测定 |
(Advanced technical ceramics; monolithic ceramics; general and textural properties; part 2: determination of density and porosity; German version EN 623-2:1993) |
| DIN EN 623-3-2003 |
高级工业陶瓷.整体陶瓷.一般和结构特性.第3部分:粒度和粒度分布的测定(用线性截断法表征) |
(Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the linear intercept method); German version EN 623-3:2001) |
| DIN EN 623-4-2005 |
高级工业陶瓷.块体陶瓷.一般和结构特性.第4部分:表面粗糙度的测定 |
|
| DIN EN 62300-2005 |
带塑料光纤的用户音频/视频设备数字接口 |
|
| DIN EN 62309-2005 |
含再用部件的产品的可靠性.功能性要求和试验 |
|
| DIN EN 62315-1-2004 |
非压缩数字视频接口用DTV数据图.第1部分:总则 |
|
| DIN EN 62319-1-1-2005 |
聚合热敏电阻.直接加热的阳极阶跃函数温度系数.第1-1部分:空白详细规范.限流应用 |
|
| DIN EN 62319-1-2005 |
聚合热敏电阻.直接加热的阳极阶跃函数温度系数.第1部分:总规范 |
|
| DIN EN 62326-1-2002 |
印制电路板.第1部分:总规范 |
(Printed boards - Part 1: Generic specification (IEC 62326-1:2002); German version EN 62326-1:2002) |
| DIN EN 62326-4-1-1997 |
印制电路板.第4部分:带层连接的刚性多层印制电路板.分规范.第1节:性能证实详细规范.要求等级A,B和C |
(Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections; sectional specification; section 1: Capability detail specification; performance levels A, B and C (IEC 62326-4-1:1996); German version EN 62326-4-1:1997) |
| DIN EN 62326-4-1997 |
印制电路板.第4部分:层间连接的硬质多层印制电路板.分规范 |
(Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections; sectional specification (IEC 62326-4:1996); German version EN 62326-4:1997) |
| DIN EN 62330-1-2004 |
使用12.65mm(0.5 in)磁带的螺旋扫描数字视频盒式磁带记录系统.HD-D5格式.第1部分:VTR规范 |
|
| DIN EN 62330-2-2004 |
使用12.65mm(0.5 in)磁带的螺旋扫描数字视频盒式磁带记录系统.HD-D5格式.第2部分:压缩格式 |
|
| DIN EN 62330-3-2004 |
使用12.65mm(0.5 in)磁带的螺旋扫描数字视频盒式磁带记录系统.HD-D5格式.第3部分:数字流格式 |
|
| DIN EN 62358-2005 |
铁氧体磁心.标准电感系数及其公差 |
|
| DIN EN 62375-2005 |
视频系统(625/50改进的).使用垂直消隐间隔的视频和伴随数据.模拟接口 |
|
| DIN EN 624-2001 |
LPG器具专用规范.在车辆和船上安装房间密封的LPG空间加热设备 |
(Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats; German version EN 624:2000) |
| DIN EN 626-1-1994 |
机器安全性.减少由机器中产生的有害物质对健康造成的危险.第1部分:对机器生产厂家原则和规定 |
(Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufactures; German version EN 626-1:1994) |
| DIN EN 626-2-1996 |
机器安全性.减少由机器中产生的有害物质对健康造成的危害.第2部分:检验程序制定的方法 |
(Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures; German version EN 626-2:1996) |
| DIN EN 627-1995 |
升降机,电梯和自动扶梯的数据录入和遥控的规则 |
(Specification for data logging and monitoring for lifts, escalators and passenger conveyors; German version EN 627:1995) |
| DIN EN 629-1-1996 |
移动式煤气罐.煤气罐连结阀用25E圆锥形螺纹.第1部分:规范 |
(Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 1: Specification; German version EN 629-1:1996) |
| DIN EN 629-2-1996 |
移动式煤气罐.煤气罐连结阀用25E圆锥形螺纹.第2部分:量测检验 |
(Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 2: Gauge inspection; German version EN 629-2:1996) |
| DIN EN 631-1-1994 |
和食品接触的材料和物件.食物容器.第1部分:容器尺寸 |
(Materials and articles in contact with foodstuffs; catering containers; part 1: dimensions of containers; German version EN 631-1:1992) |
| DIN EN 631-2-1999 |
和食品接触的材料和物件.食物容器.第2部分:附件和支承件的尺寸 |
(Materials and articles in contact with foodstuffs - Catering containers - Part 2: Dimensions of accessories and supports; German version EN 631-2:1999) |
| DIN EN 632-1995 |
农业机械.联合收割机和稿草切碎机.安全性 |
(Agricultural machinery - Combine harvesters and forage harvesters - Safety; German version EN 632:1995) |
| DIN EN 633-1993 |
水泥胶合碎料板板.定义和分类 |
(Cement-bonded particleboards; definition and classification; German version EN 633:1993) |
| DIN EN 634-1-1995 |
混凝土连结夹紧板.要求.第1部分:一般要求 |
(Cement-bonded particleboards - Specifications - Part 1: General requirements; German version EN 634-1:1995) |
| DIN EN 634-2-1996 |
混凝土连结夹紧板.要求.第2部分:在干燥,潮湿和室外用水泥胶合(PZ)连接夹紧板的要求 |
(Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and exterior conditions; German version EN 634-2:1996) |
| DIN EN 635-1-1995 |
胶合板.按表面外观分类.第1部分:概述 |
(Plywood - Classification by surface appearance - Part 1: General; German version EN 635-1:1994) |
| DIN EN 635-2-1995 |
胶合板.按表面外观分类.第2部分:硬木 |
(Plywood - Classification by surface appearance - Part 2: Hardwood; German version EN 635-2:1995) |
| DIN EN 635-3-1995 |
胶合板.按表面外观分类.第3部分:针叶木 |
(Plywood - Classification by surface appearance - Part 3: Softwood; German version EN 635-3:1995) |
| DIN EN 635-5-1999 |
胶合板.按表面外观分类.第5部分:测量方法,特性说明和误差 |
(Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects; German version EN 635-5:1999) |
| DIN EN 636-1-1997 |
胶合板.规范.第1部分:对干燥区域用胶合板的要求 |
(Plywood - Specifications - Part 1: Requirements for plywood for use in dry conditions; German version EN 636-1:1996) |
| DIN EN 636-2-1997 |
胶合板.规范.第2部分:对潮湿区域用胶合板的要求 |
(Plywood - Specifications - Part 2: Requirements for plywood for use in humid conditions; German version EN 636-2:1996) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com