标准号 |
中文名称 |
英文名称 |
| NF E66-612-1983 |
内面拉削刀具.后挂钩.形状和尺寸 |
(Internal broaching tools. Tail ends.) |
| NF E66-613-1989 |
内孔拉刀.推力拉刀.W型拉刀端头尺寸 |
(INTERNAL BROACHING TOOLS. PUSHED BROACHES. DIMENSIONS OF PULL ENDS,SHAPE W.) |
| NF E66-614-1989 |
内孔拉刀.推力挂刀.U型或V型拉刀尾端.尺寸 |
(INTERNAL BROACHING TOOLS. PUSHED BROACHES. DIMENSIONS OF TAIL ENDS,SHAPES U OR V.) |
| NF E66-620-1983 |
拉削刀具.齿圈.形状和尺寸 |
(BROACHING TOOLS. SHAPES AND DIMENSIONS OF BROACH TEETH.) |
| NF E66-740-1995 |
硬质合金的镦锻模.术语 |
(Hardmetal heading dies. Terminology.) |
| NF E71-001-1986 |
锤打和铆接工具.术语.名称 |
(TOOLS FOR HAMMERING,HITTING AND RIVETTING. TERMINOLOGY. NOMENCLATURE.) |
| NF E71-002-2000 |
锤子.钢锤头技术规范.试验规程 |
(Hammers - Technical specifications concerning steel hammer heads - Test procedures.) |
| NF E71-011-1976 |
电工锤.尺寸范围 |
(ELECTRICIAN`S HAMMER. DIMENSIONS.) |
| NF E71-012-1976 |
细木工锤.尺寸范围 |
(CARPENTER`S HAMMER. DIMENSIONS.) |
| NF E71-013-1976 |
锻工锤.尺寸范围 |
(CROSS PANE. DIMENSIONS.) |
| NF E71-014-1976 |
钳工锤（铆钉手锤）.尺寸范围 |
(LOCKSMITH`S HAMMER. DIMENSIONS.) |
| NF E71-015-1976 |
装配锤.尺寸范围 |
(TRIMMING HAMMER. DIMENSIONS.) |
| NF E71-100-1983 |
高温技术推进装料封焊设备.一般规则 |
(Propellant actuated fixing equipment. General requirements.) |
| NF E71-101-1983 |
高温技术推进装料封焊设备.试验 |
(Propellant actuated fixing equipement. Tests.) |
| NF E71-105-1983 |
封焊、开采和其他相似机械.配接套管.特征 |
(CARTRIDGES FOR WALL SEALING,BLASTING AND SIMILAR APPLIANCES. TECHNICAL CHARACTERISTICS.) |
| NF E71-210-1983 |
机械师用凿子和扁铲 |
(Engineer cold chisels and cross-cut chisels.) |
| NF E71-211-1983 |
深钉冲头（或冲头）.除销器.中心冲头 |
(Taperpunches. Pin punches. Centre punches.) |
| NF E71-212-1983 |
建筑物用冲子和凿子 |
(Concrete point chisels and mason chisels.) |
| NF E71-213-1986 |
锻造和有关成套工具.冲子.尺寸.规范 |
(TOOLS FOR HAMMERING,HITTING AND RIVETING. WALL-DRILLS. DIMENSIONS. SPECIFICATIONS.) |
| NF E73-001-1971 |
手用木工直锯 |
(STRAIGHT HAND SAWS FOR WOODWORKING.) |
| NF E73-010-1984 |
木工带锯.齿断面形状.术语和名称 |
(Saw teeth for woodworking saws. Profile shape. Terminology and designation.) |
| NF E73-040-1974 |
木工窄带锯.尺寸 |
(Narrow bandsaw blades for woodworking - Dimensions.) |
| NF E73-043-1975 |
通用木工圆锯 |
(GENERAL PURPOSE CIRCULAR SAWS FOR WOODWORKING.) |
| NF E73-050-1973 |
具有相应比例的冷、横切割金属用整体和组装的圆锯.传动互换性尺寸.锯直径范围２２４和２２４０mm |
(Solid and segmental circular saws for cold cutting of metals. Interchangeability dimensions of the drive. Saw diameter range 224 to 2 240 mm.) |
| NF E73-071-1996 |
弓锯条.第2部分:机锯条尺寸 |
(Hacksaw blades. Part 2 : dimensions for machines blades.) |
| NF E73-071/A1-1982 |
修改件1 |
() |
| NF E73-072-1982 |
手用金属直带锯刀刃.特性 |
(HAND HACKSAW BLADES. SPECIFICATIONS.) |
| NF E73-073-1983 |
手用金属直锯架 |
(FRAMES FOR HAND SAWS FOR METAL.) |
| NF E73-075-1-2003 |
金属切削带锯条.第1部分:定义和术语 |
(Metal cutting band saw blades - Part 1 : definitions - Terminology.) |
| NF E73-075-1980 |
金属带锯刀刃.定义.术语 |
(Metal cutting band saw blades. Definitions and terminology.) |
| NF E73-075-2-2003 |
金属切削带锯条.第2部分:规范.尺寸 |
(Metal cutting band saw blades - Part 2 : specifications - Dimensions.) |
| NF E73-076-1980 |
金属带锯刀刃.规范.尺寸 |
(METAL CUTTING BAND SAW BLADES. SPECIFICATIONS. DIMENSIONS.) |
| NF E73-100-1984 |
夹钳和虎钳.多种语言名称表 |
(Pliers and nippers. Multilingual nomenclature.) |
| NF E73-101-1-1988 |
夹钳和虎钳.一般技术规范.试验方法 |
(PLIERS AND NIPPERS. GENERAL TECHNICAL REQUIREMENTS.) |
| NF E73-101-2-1988 |
夹扭钳和剪切钳.试验方法 |
(PLIERS AND NIPPERS. METHODS OF TESTS.) |
| NF E73-106-1988 |
夹扭钳和弯切钳.侧切钳 |
(PLIERS AND NIPPERS. LEVER ASSISTED SIDE CUTTING,END CUTTING AND DIAGONAL CUTTING NIPPERS.) |
| NF E73-108-1988 |
夹扭钳和剪切钳.多支点钳.尺寸和试验数值 |
(PLIERS AND NIPPERS. MULTIPLE SLIPS JOINT PLIERS. DIMENSIONS AND TEST VALUES.) |
| NF E73-109-1988 |
夹扭钳和剪切钳.鲤鱼钳.尺寸和试验数值 |
(PLIERS AND NIPPERS. SLIP JOINT PLIERS. DIMENSIONS AND TEST VALUES.) |
| NF E73-114-1988 |
夹扭钳和剪切钳.木工用钳.尺寸和试验数值 |
(PLIERS AND NIPPERS. CARPENTER`S PINCERS. DIMENSIONS AND TEST VALUES.) |
| NF E73-115-1988 |
夹扭钳和剪切钳.建筑工用钳.尺寸和试验数值 |
(PLIERS AND NIPPERS. CONSTRUCTION WORKER`S PINCERS. DIMENSIONS AND TEST VALUES.) |
| NF E73-116-1988 |
夹扭钳和剪切钳.电工钳.术语 |
(Pliers and nippers. Electronic pliers. Nomenclature.) |
| NF E73-117-1990 |
电工用钳.通用技术规范 |
(ELECTRONIC PLIERS. GENRAL TECHNICAL REQUIREMENTS.) |
| NF E73-118-1990 |
电工用钳.试验方法 |
(ELECTRONIC PLIERS. METHODS OF TEST.) |
| NF E73-119-1990 |
电工用钳.单一功能的钳子.夹紧和操作用的钳子 |
(ELECTRONIC PLIERS. SINGLE PURPOSE NIPPERS. PLIERS FOR GRIPPING AND MANIPULATING.) |
| NF E73-120-1990 |
电工用钳.单一功能的钳子.剪切钳 |
(ELECTRONIC PLIERS. SINGLE PURPOSE NIPPERS. CUTTING NIPPERS.) |
| NF E73-130-1990 |
钳和夹钳.弹簧圈用钳 |
(PLIERS AND NIPPERS. PLIERS FOR RETAINING RINGS.) |
| NF E73-150-1972 |
煤气管钳 |
(GASPIPE PLIERS.) |
| NF E73-201-1996 |
木工工具.凿子和半圆凿 |
(Woodworking tools. Chisels and gouges.) |
| NF E73-205-1985 |
细木工角尺.带托的金属角尺 |
(JOINER`S SQUARES. METALLIC SQUARES WITH STOCK.) |
| NF E73-303-1996 |
木工工具.木体刨 |
(Woodworking tools. Wooden bodied planes.) |
| NF E73-304-1996 |
木工工具.金属台刨、刨刀和盖铁 |
(Woodworking tools. Metal-bodied bench planes, plane cutters and cap irons.) |
| NF E73-510-1980 |
木材机加工刀具.开槽铣刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR SLOT. DIMENSIONS.) |
| NF E73-511-1980 |
木材机加工刀具.槽边铣刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR RABBET. DIMENSIONS .) |
| NF E73-512-1980 |
木材机加工刀具.叉形榫接铣刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR FORK. DIMENSIONS.) |
| NF E73-513-1980 |
木材机加工刀具.制榫铣刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR TENON. DIMENSIONS.) |
| NF E73-514-1980 |
木材机加工刀具.四分之一圆铣刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR QUARTER ROUND. DIMENSIONS.) |
| NF E73-515-1980 |
木材机加工刀具.凹形线脚铣刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR ROUNDING GROOVE. DIMENSIONS.) |
| NF E73-516-1980 |
木材机加工刀具.４５°倒角铣刀.尺寸 |
(MECHANICAL TOOLING FOR WOOD. CUTTERS FOR 45 DEGREES CHANFER. DIMENSIONS.) |
| NF E73-520-1997 |
木材加工用刀具的安全要求.第1部分:铣刀和圆锯锯齿(欧洲标准EN 847-1) |
(Tools for woodworking. Safety requirements. Part 1 : milling tools and circular saw blades.) |
| NF E73-521-2-2001 |
木工工具.安全要求.第2部分:支架固定铣刀的支架要求 |
(Tools for woodworking - Safety requirements - Part 2 : requirements for the shank of shank mounted milling tools.) |
| NF E74-100-1968 |
铰刀.切削部分直径特定公差 |
(REAMERS. SPECIAL TOLERANCES FOR CUTTING DIAMETER.) |
| NF E74-105-1974 |
１／１０锥度的锥形铰刀 |
(TAPER REAMERS WITH 10 % TAPER.) |
| NF E74-112-1968 |
巴黎型手用圆柱柄铰刀 |
(HAND REAMERS WITH PARALLEL SHANKS (TYPE “FACON PARIS“).) |
| NF E74-300-1998 |
螺栓和螺母用装配工具.扳手和套筒扳手的开口.通用公差 |
(Assembly tools for screws and nuts. Wrench and socket openings. Tolerances for general use.) |
| NF E74-303-2001 |
螺钉和螺母组装工具.锻造的和管形套筒扳手.头部外形最大尺寸 |
(Assembly tools for screws and nuts - Forged and tubular socket wrenches - Maximum outside head dimensions.) |
| NF E74-304-2001 |
螺钉和螺母装配工具.双头开口扳手、双头环形扳手和多用扳手.端部最大宽度 |
(Assembly tools for screws and nuts - Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches - Maximum widths of heads.) |
| NF E74-305-2001 |
螺钉和螺母装配工具.双头扳手.尺寸选配 |
(Assembly tools for screws and nuts - Double-ended wrenches - Size pairings.) |
| NF E74-307-2001 |
螺钉和螺母用装配工具.组合扳手.扳手长度和端口最大厚度 |
(Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads.) |
| NF E74-310-2001 |
螺钉和螺母用装配工具.工程用双头开口扳手.扳手长度和端口厚度 |
(Assembly tools for screws and nuts - Double-headed open-ended engineers’ wrenches - Length of wrenches and thickness of the heads.) |
| NF E74-311-2001 |
螺钉和螺母用装配工具.双头平直套筒扳手和斜口套筒扳手.扳手长度和端口厚度 |
(Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads.) |
| NF E74-313-2001 |
螺钉和螺母用装配工具.双头深斜口套筒扳手和改进的斜口套筒扳手.扳手长度和端口厚度 |
(Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads.) |
| NF E74-321-1998 |
螺钉和螺母用装配工具.十字形套筒扳手.尺寸和扭矩试验 |
(ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKET WRENCHES. DIMENSIONS AND TORQUE TEST.) |
| NF E74-322-1972 |
螺钉螺帽紧固工具.齿条式扳手 |
(ASSEMBLY TOOLS FOR SCREWS AND NUTS.RACK WRENCHES.) |
| NF E74-323-1972 |
螺钉螺帽紧固工具.开槽螺帽用单钩扳手 |
(ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES) |
| NF E74-324-2001 |
螺钉和螺母用装配工具.可调扳手 |
(Assembly tools for screws and nuts - Adjustable wrenches.) |
| NF E74-325-2003 |
螺钉和螺母用装配工具.手动转矩工具.设计一致性试验、质量一致性试验和重新校准程序的要求和试验方法 |
(Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure.) |
| NF E74-326-1995 |
火花和点火塞用长套管型套筒扳手 |
(SOCKET WRENCHES FOR SPARK- AND GLOW-PLUGS.) |
| NF E74-331-2003 |
螺钉和螺母用装配工具.内六角扳手 |
(Assembly tools for screws and nuts - Hexagon socket screw keys.) |
| NF E74-351-2002 |
螺钉和螺母用装配工具.一字槽头螺钉用旋具.第2部分:手工操作旋具的一般要求、刀刃长度和标记 |
(Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.) |
| NF E74-352-1998 |
螺钉和螺母用装配工具.槽螺钉用旋具.第1部分:手工及机械操作用的旋具头 |
(Assembly tools for screws and nuts. Screwdrivers for slotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.) |
| NF E74-353-1-2002 |
螺钉和螺母用装配工具.机动旋转头.第1部分:一字槽螺钉旋具 |
(Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1 : screwdriver bits for slotted head screws.) |
| NF E74-353-2-2002 |
螺钉和螺母用装配工具.机动旋转头.第2部分:十字槽螺钉旋具头 |
(Assembly tools for screws and nuts - Machine-operated screwdrivers bits - Part 2 : screwdriver bits for cross-recessed head screws.) |
| NF E74-353-3-2002 |
螺钉和螺母用装配工具.机动旋转头.第3部分:内六角螺钉用旋具头 |
(Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3 : screwdriver bits for hexagon socket screws.) |
| NF E74-354-2002 |
螺钉和螺母用装配工具.螺旋棘轮螺钉旋具头.尺寸 |
(Assembly tools for screws and nuts - Spiral ratchet screwdriver ends - Dimensions.) |
| NF E74-355-1993 |
十字槽头螺钉用旋转具.第1部分:旋具尖 |
(SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 1 : DRIVERS POINTS.) |
| NF E74-356-1993 |
十字槽头螺钉用旋具.第2部分:手持式旋具的一般要求、旋具头长度和标记 |
(SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 2 : GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS.) |
| NF E74-360-2001 |
螺钉和螺母用装配工具.手动和机动螺丝刀的驱动端和连接部件.尺寸和扭矩试验 |
(Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing.) |
| NF E74-361-1997 |
螺钉和螺母用装配工具.方形旋具.第1部分:手动套筒工具用方形旋具 |
(Assembly tools for screws and nuts. Driving squares. Part 1 : driving squares for hand socket tools.) |
| NF E74-362-1997 |
螺钉和螺母用装配工具.方形旋具.第2部分:电动套筒工具用方形旋具 |
(Assembly tools for screws and nuts. Driving squares. Part 2 : driving squares for power socket tools.) |
| NF E74-363-1-1997 |
螺钉和螺母用装配工具.方形传动套筒.第1部分:手动套筒.尺寸 |
(Assembly tools for screws and nuts. Square drive sockets. Part 1 : hand-operated sockets. Dimensions.) |
| NF E74-363-2-1997 |
螺钉和螺母用装配工具.方形传动套筒.第2部分:机动“冲击“套筒.尺寸 |
(Assembly tools for screws and nuts. Square drive sockets. Part 2 : machine-operated sockets “impact“. Dimensions.) |
| NF E74-363-3-2001 |
螺钉和螺母用组合工具.方形驱动套筒.第3部分:机器驱动套筒(无冲击).尺寸 |
(Assembly tools for screws and nuts - Square drive sockets - Part 3 : machine-operated sockets (“non impact“) - Dimensions.) |
| NF E74-365-1997 |
螺钉和螺母用装配工具.手动方形传动套筒扳手上的传动件.尺寸和试验 |
(Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests.) |
| NF E74-366-1997 |
螺钉和螺母用装配工具.手动方形传动套筒扳手上的附件.尺寸和试验 |
(Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests.) |
| NF E74-367-1995 |
螺钉和螺母用装配工具.机动插头扳手的方块传动加长六角插头 |
(Assembly tools for screws and nuts. Square drive extension hexagon insert, for power socket wrenches.) |
| NF E74-381-1997 |
螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套筒 |
(Assembly tools for screws and nuts. Technical specifications. Part 1 : hand-operated wrenches and sockets.) |
| NF E75-001-1985 |
钢锉和锉刀.尺寸 |
(Files and rapes. Dimensions.) |
| NF E75-002-1980 |
钢锉和锉刀.刀刃特性 |
(Files and repes. Cuit characteristics.) |
| NF E75-070-2002 |
涂磨料产品的安全要求 |
(Safety requirements for coated abrasive products.) |
| NF E75-072-1994 |
砂带.标识、尺寸和公差 |
(Abrasive belts. Designation, dimensions and tolerances.) |
| NF E75-075-1972 |
圆柱形磨光套管.名称.尺寸 |
(CYLINDRICAL ABRASIVE SLEEVES.) |
| NF E75-077-1999 |
涂敷磨料.磨料辊筒. |
(Coated abrasive products - Abrasive rolls.) |
| NF E75-082-1976 |
涂层研磨件.带凸缘的小叶轮.名称.尺寸 |
(COATED ABRASIVES. FLAP WHEELS WITH INCORPORATE FLANGES OR SEPARATE FLANGES. DESIGNATION. DIMENSIONS.) |
| NF E75-084-2001 |
覆层磨料.第1部分:平板 |
(Coated abrasives - Part 1 : plain sheets.) |
| NF E75-085-2001 |
覆层磨料.第2部分:萃取尘埃用带孔磨料板 |
(Coated abrasives - Part 2 : abrasive sheets with holes dust extraction.) |
| NF E75-086-2001 |
涂覆磨料.风门盘 |
(Coated abrasives - Flap discs.) |
| NF E75-087-2003 |
涂覆磨料.硫化纤维砂轮 |
(Coated abrasives - Vulcanized-fibre discs.) |
| NF E75-088-2001 |
覆层磨料.第1部分:普通圆盘 |
(Coated abrasives - Part 1 : plain discs.) |
| NF E75-089-2001 |
覆层磨料.萃取尘埃用带孔普通圆盘 |
(Coated abrasives - Plain discs with holes for dust extraction.) |
| NF E75-100-2001 |
涂覆磨料.磨粒尺寸分析.第1部分:磨粒尺寸分布试验 |
(Coated abrasives - Grain size analysis - Part1 : grain size distribution test.) |
| NF E75-101-2001 |
涂覆磨料.磨粒尺寸分析.第2部分:最大磨粒为P12-P220的磨粒尺寸分布测定 |
(Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.) |
| NF E75-102-2001 |
涂覆磨料.磨粒尺寸分析.第3部分:最小磨粒为P240-P2500的磨粒尺寸分布测定 |
(Coated abrasives - Grain size analysis - Part 3 : determination of grain size distribution of microgrits P240 to P2500.) |
| NF E75-200-1985 |
粘结研磨件.砂轮的静止平衡.允许偏斜.规范.检验 |
(BONDED ABRASIVE PRODUCTS. STATIC BALANCING OF GRINDING WHEELS. PERMISSIBLE UNBALANCE. SPECIFICATION. INSPECTION.) |
| NF E75-201-1985 |
粘结研磨件.总则.名称，标记.外径范围.公差 |
(BONDED ABRASIVE PRODUCTS. GENERAL FEATURES : DESIGNATION. MARKING. RANGE OF EXTERNAL DIAMETERS. TOLERANCES.) |
| NF E75-202-1986 |
粘结研磨件.毛刺砂轮.名称.尺寸.规范 |
(BONDED ABRASIVE PRODUCTS. SNAGGING WHEELS. DESIGNATION. DIMENSIONS. SPECIFICATIONS.) |
| NF E75-203-1989 |
粘结研磨件.修整砂轮 |
(BONDED ABRASIVE PRODUCTS. GRINDING WHEELS. DESIGNATION. DIMENSIONS. SPECIFICATIONS.) |
| NF E75-204-1991 |
粘结磨件.磨刃砂轮.名称.尺寸.规范 |
(BONDED ABRASIVE PRODUCTS. GRINDING WHEELS. DESIGNATION. DIMENSIONS. SPECIFICATIONS.) |
| NF E75-205-1984 |
粘结研磨件.切割砂轮 |
(BONDED ABRASIVE PRODUCTS. CUTTING-OFF WHEELS.) |
| NF E75-206-1987 |
粘结研磨件.杆柄砂轮.５２型.名称.尺寸和规范 |
(Bonded abrasive products. Mounted wheels - Type 52. Designation. Dimensions and specifications.) |
| NF E75-208-1982 |
粘结研磨件.机械固定干面砂轮和粘着干面轮.尺寸和公差 |
(BONDED ABRASIVE PRODUCTS. MECHANICAL LOCKED OR FITTED LAPIDARY GRINDING WHEELS. DIMENSIONS AND TOLERANCES.) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com