标准号 |
中文名称 |
英文名称 |
NF E48-617-1974 |
液压传动用流体.难燃流体和HM及HV级矿物油.耐磨性能 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-FIRE RESISTANT FLUIDS AND MINERAL OILS,FORMS HM AND HV - ANTI-WEAR PROPERTIES) |
NF E48-618-1973 |
液压传动用流体.用难燃流体屏幕在高压射流下可燃性的测定 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF IGNITABILITY OFFIRE-RESISTANT FLUIDS ATOMIZED UNDER HIGH PRESSURE WITH SCREEN) |
NF E48-620-1973 |
液压传动用流体.碳尘埃和难燃流体混合物中火焰蔓延性的测定 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF FLAME-PROPAGATION IN A MIXTURE OF FIRE-RESISTANT FLUIDS WITH COAL-DUST) |
NF E48-640-1973 |
液压传动用流体.难燃流体使用须知 |
(FLUIDS FOR HYDRAULIC POWER SYSTEMS-DIRECTIONS FOR USE OF FIRE-RESISTANT FLUIDS) |
NF E48-651-2002 |
液压传动.液压液污染.用光学显微镜计数法测定粒状污染物 |
(Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope.) |
NF E48-652-1990 |
液压传动用流体.用重量法测定粉尘总污染 |
(Hydraulic fluid power. Fluids. Determination of overall particulate contamination by the gravimetric method.) |
NF E48-653-1991 |
液体传动.液体取样瓶,对检查与清洁容器方法的鉴定 |
(Hydraulic fluid power. Sampling bottles. Qualifying methods and lot inspection.) |
NF E48-658-1990 |
液压传动.流体.利用光干扰自动计数法对粉末污染的测定 |
(HYDRAULIC FLUID POWER. FLUIDS. DETERMINATION OF PARTICULATE CONTAMINATION BY AUTOMATIC COUNTING USING THE LIGHT INTERRUPTION PRINCIPLE.) |
NF E48-659-2003 |
液压传动.部件和件的清洁度.与污物收集、分析和数据报告相关的检验文件和原则 |
(Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting.) |
NF E48-660-1991 |
液压传动.流体.用光学显微镜和图象分析测定固体粉尘污染 |
(HYDRAULIC FLUID SYSTEMS. FLUIDS. DETERMINATION OF SOLID PARTICULATE CONTAMINATION BY OPTICAL MICROSCOPE AND IMAGE ANALYSIS.) |
NF E48-670-2003 |
液压传动.滤芯.性能特征鉴定的试验序列 |
(Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics.) |
NF E48-675-1988 |
液压传动.过滤件.用流量循环变化的疲劳试验检验过滤件的特性 |
(Hydraulic fluid power. Filter elements. Resistance to the fatigue due to cyclic flow variations.) |
NF E48-677-2002 |
液力传动.过滤器.差压对流量特性的评定 |
(Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics.) |
NF E48-678-1995 |
液压传动.接收器口及压力输送用过滤器.性能 |
(Hydraulic fluid power. Filters for receiver venting and pressurization. Performances.) |
NF E48-679-1990 |
液压传动.过滤器.绝对过滤额定值的测定 |
(HYDRAULIC FLUID POWER. FILTER ELEMENTS. DETERMINATION OF ABSOLUTE FILTRATION RATING.) |
NF E48-685-2000 |
液压动力.过滤件的过滤性能的评价多途径方法 |
(Hydraulic fluid power - Multi-pass method for evaluating filtration performance of a filter element.) |
NF E48-690-1990 |
液压传动.流体.矿物油过滤性的测定 |
(Hydraulic fluid power. Fluids. Measurement of filtrability of mineral oils.) |
NF E48-691-1995 |
液压传动.液体.存在于水中的矿物油的可滤性测量 |
(Hydraulic fluid power. Fluids. Measurement of filtrability of minerals oils in the presence of water.) |
NF E48-692-1997 |
液压传动.液体.HFC和HFD类防火液体的可滤性测量 |
(Hydraulic fluid power. Fluids. Measurement of filtrability of HFC and HFD class fire resistant fluids.) |
NF E48-695-2003 |
液压传动.零部件.微粒污染测量结果的表示 |
(Hydraulic fluid power - Parts and components - Expression of particulate pollution measurement results.) |
NF E48-701-1993 |
液压传动.滤油器.定义、标定压力、标定尺寸、配件尺寸 |
(Hydraulic fluid power. Filters. Definitions, nominal pressures, nominal sizes, fitting dimensions.) |
NF E48-702-1993 |
液压传动.滤油器件和滤油器腔.特性和要求 |
(Hydraulic fluid power. Filter elements and filter housings. Characteristics, requirements.) |
NF E48-703-1993 |
液压传动.串联过滤器用过滤器件.尺寸 |
(Hydraulic fluid power. Filtr elements for inline filters. Dimensions.) |
NF E48-704-1995 |
液压传动.箱顶回流过滤器用过滤器件.尺寸 |
(Hydraulic fluid power. Filter elements for tank top return filters. Dimensions.) |
NF E48-705-1998 |
液压动力.水箱顶部回转线滤膜.滤膜尺寸 |
(Hydraulic fluid power. Tank top return-line filter. Fitting dimensions.) |
NF E49-001-1992 |
液压动力.8bar巴单和双端带活塞杆气缸.孔径为25mm-200mm.安装尺寸的互换性 |
(Pneumatic fluid power. 8 bar single and double-ended piston rod cylinders. Bores from 25 mm up to 200 mm. Interchangeability and mounting dimensions.) |
NF E49-003-1-1992 |
气压传动.10bar气缸.32mm-320mm缸筒.第1部分:单端带活塞杆气缸 |
(PNEUMATIC FLUID POWER. CYLINDERS 10 BAR. BORE 32 MM TO 320 MM. INTERCHANGEABILITY DIMENSIONS. PART 1 : SINGLE-ENDED PISTON ROD CYLINDER.) |
NF E49-003-2-1993 |
气动液力传动.10bar气缸.32mm-320mm缸筒.第2部分:安装和附件 |
(PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 2 : MOUNTING AND ACCESSORIES.) |
NF E49-003-3-1993 |
气动液力传动.10bar气缸.互换性尺寸.第3部分:双头活塞杆气缸 |
(PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 3 : DOUBLE-ENDED PISTON ROD CYLINDER.) |
NF E49-003-4-1995 |
气动液力传动.10bar气缸.32mm-320mm缸筒.第4部分:活塞杆端部带统一互换销的气缸 |
(PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 4 : CYLINDER WITH ROD END WITH INTEGRATED PIN MOUNTING.) |
NF E49-003-5-1995 |
气动液力传动.10bar气缸.32mm-320mm缸筒.第5部分:MS 3 高角头 |
(PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 5 : HIGHT HEAD ANGLE MS 3.) |
NF E49-004-1-1998 |
液压动力.10bar气缸.袖珍系列,缩小冲程.尺寸互换性.第1部分:内径由20MM-63MM的信号反应气缸. |
(PNEUMATIC FLUID POWER. 10 BAR CYLINDERS, COMPACT SERIES, REDUCED STROKE, INTERCHANGEABILITY DIMENSIONS. PART 1 : SINGLE ACTING CYLINDERS, BORES FROM 20 MM TO 63 MM.) |
NF E49-004-2-1998 |
液压动力.10bar气缸.袖珍系列,缩小冲程.尺寸互换性.第2部分:内径由20MM-100MM的双反应气缸. |
(PNEUMATIC FLUID POWER. 10 BAR CYLINDERS, COMPACT SERIES, REDUCED STROKE, INTERCHANGEABILITY DIMENSIONS. PART 2 : DOUBLE ACTING CYLINDERS, BORES FROM 20 MM TO 100 MM.) |
NF E49-005-2001 |
气压液动.气缸.最终检验和验收标准 |
(Pneumatic fluid power - Cylinders - Final examination and acceptance criteria.) |
NF E49-030-1992 |
气压传动.单杆起重器.10bar系列(1000kPa).孔径为8-25mm.安装尺寸 |
(Pneumatic fluid power. Single rod cylinders 10 bar (1000 kpa) series. Bores from 8 to 25 mm. Mounting dimensions.) |
NF E49-051-1973 |
气压传动的连接.螺纹连接管.金属和塑料管 |
(COUPLING FOR PNEUMATIC TRANSMISSIONS.SCREWED COUPLINGS-METAL AND PLASTIC PIPES) |
NF E49-052-2002 |
气压液动.连接件.气口和螺纹端头 |
(Pneumatic fluid power - Connections - Ports and stud ends.) |
NF E49-080-1-2002 |
气压液动.五通定向控制阀.第1部分:不带电连接器的安装接口 |
(Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.) |
NF E49-080-2-2002 |
气压液动.五通方向控制阀.第2部分:任选电气连接器的安装接口面 |
(Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.) |
NF E49-085-1991 |
气压传动.5孔分配器.底座 |
(Pneumatic fluid power. Five-port directional control valves. Subplate.) |
NF E49-086-1991 |
气压传动.5孔分配器.端部固定、底部使用孔的并列底座 |
(Pneumatic fluid power. Five-port directional control valves. Juxtaposable subplate with bottom service ports and end fixing.) |
NF E49-090-2-2003 |
气压传动.18mm和26mm五气口方向控制阀.第2部分:带光学电接头的安装面 |
(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2 : mounting interfaces with optional electrical connector.) |
NF E49-091-2002 |
气压传动.控制阀和其它部件的孔口和控制机械的验证 |
(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components.) |
NF E49-092-2002 |
流压传动系统和件.带接地接点的16mm方形电插头.特性和要求 |
(Fluid power systems and components - 16 mm square electrical connector with earth contact - Characteristics and requirements.) |
NF E49-093-2003 |
气压传动.3/2电磁阀.安装接口表面 |
(Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces.) |
NF E49-100-1996 |
气压传动.聚酰胺管.尺寸.规范 |
(Pneumatic fluid power. Polyamid tubes. Dimensions. Specifications.) |
NF E49-101-1994 |
气压传动.聚胺脂管.尺寸.规范 |
(PNEUMATIC FLUID POWER. POLYURETHANE TUBES. DIMENSIONS. SPECIFICATIONS.) |
NF E49-201-1999 |
气压传动.系统相关的一般规则 |
(PNEUMATIC FLUID POWER. GENERAL RULES RELATING TO SYSTEMS.) |
NF E49-202-1996 |
机械安全.液力系统和部件的安全要求.气压装置(欧洲标准EN 983) |
(Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics.) |
NF E49-300-2000 |
气流动力.通过管道库测定空气借记特性的方法 |
(Pneumatic fluid power - Method of characterization of air debit coefficients by drains reservoir.) |
NF E49-310-1-1998 |
气压传动.压缩空气滤器.第1部分:包含在供应商资料和产品标志要求的主要特性 |
(Pneumatic fluid power. Compressed air filters. Part 1 : main characteristics to be included in supplier`s literature and product-marking requirements.) |
NF E49-310-2-1998 |
气压传动.压缩空气滤器.第2部分:测试包含在供应商资料和产品标志要求的主要特性试验方法 |
(PNEUMATIC FLUID POWER. COMPRESSED AIR FILTERS. PART 2 : TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIER`S LITERATURE.) |
NF E49-320-1-1998 |
气动液体动力.压缩空气润滑器.第1部分:包含在供应商资料和产品标志要求的主要特性 |
(Pneumatic fluid power. Compressed air lubricators. Part 1 : main characteristics to be included in supplier`s literature and product-marking requirements.) |
NF E49-320-2-1998 |
气动液体动力.压缩空气润滑器.第2部分:测定包含在供应商资料和产品标志要求的主要特性的试验方法 |
(Pneumatic fluid power. Compressed air lubricators. Part 2 : test methods to determine the main characteristics to be included in supplier`s literature.) |
NF E49-330-1-2000 |
气流动力.压缩空气调节器和过滤器调节器.第1部分:包括在供应商和产品标记要求内的的主要特性 |
(Pneumatic fluid power - Compressed air regulators and filters-regulators - Part 1 : main characteristics to be included in literature from suppliers and product-marking requirements.) |
NF E49-330-2-2000 |
气流动力.压缩空气调节器和过滤器调节器.第2部分:包括在供应商文件内的主要特性测定的试验方法 |
(Pneumatic fluid power - Compressed air regulators and filter-regulators - Part 2 : test methods to determine the main characteristics to be included in literature from suppliers.) |
NF E49-340-1992 |
气压传动.排气分配器.消声器试验规程 |
(Pneumatic fluid power. Directional control valve air exhaust. Test code for silencers.) |
NF E49-400-1992 |
气压液力传动.8巴工作缸.装配附件.叉形架和凸榫 |
(Pneumatic fluid power. 8 bar cylinders. Mounting accessories. Fork yokes and tenons.) |
NF E49-501-1976 |
气压传动系统.气缸.摩擦力测量.实验室方法 |
(PNEUMATIC FLUID POWER SYSTEMS. CYLINDERS. MEASUREMENT OF FRICTION FORCES. LABORATORY METHOD.) |
NF E49-600-1988 |
液压动力系统和件.液力逻辑路线.第1部分:二进制逻辑及有关功能符号 |
(Fluid-power systems and components. Fluid logic circuit. Part 1 : symbols for binary logic and related functions.) |
NF E49-601-1990 |
液压和气压传动.液力逻辑线路.第2部分:与逻辑符号相对应的供液和排液符号 |
(Fluid power systems and components. Fluid logic circuits. Part 2 : symbols for supply and exhausts as related to logic symbols.) |
NF E49-602-1990 |
液压和气压传动.液力逻辑电路.第3部分:逻辑程序和相关函数图形 |
(Fluid power systems and components. Fluid logic circuit. Part 3 : symbols for logic sequencers and related functions.) |
NF E50-001-1956 |
风力充电机组.小功率风力发电机 |
(WIND CHARGERS. LOW-RATED AEROGENERATORS.) |
NF E51-001-1968 |
通风机.词汇.分类 |
(FANS. VOCABULARY. CLASSIFICATION.) |
NF E51-004-2003 |
工业风机.平衡质量和振动等级规范 |
(Industrial fans - Specifications for balance quality and vibration levels.) |
NF E51-005-2003 |
工业风机.风机振动的测量方法 |
(Industrial fans - Method of measurement of fan vibration.) |
NF E51-190-1988 |
通风机.部分危险机械的预防和保护设备 |
(FANS. PREVENTION AND PROTECTION AGAINST SOME MECHANICAL HAZARDS.) |
NF E51-200-1981 |
压缩机,气压工具和机械.常用词汇 |
(Compressors, pneumatic tools and machines. General vocabulary.) |
NF E51-201-1981 |
压缩机.工具和气压机械.压缩机词汇 |
(Compressors, pneumatic tools and machines. Vocabulary of compressors.) |
NF E51-202-1992 |
压缩机、风动工具和机械.词汇.风动工具和机械 |
(Compressors, pneumatic tools and machines. Vocabulary. Pneumatic tools and machines.) |
NF E51-230-2002 |
石油和天然气工业.旋转型容积式压缩机.第1部分:加工压缩机(无油) |
(Petroleum and natural gas industries - Rotary-type positive displacement compressors - Part 1 : process compressors (oil-free).) |
NF E51-231-2002 |
石油和天然气工业.旋转型容积式压缩机.第2部分:封装气体压缩机(无油) |
(Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2 : packaged air compressors (oil-free).) |
NF E51-233-2003 |
石油、化学和气体工业.离心压缩机 |
(Petroleum, chemical and gas service industries - Centrifugal compressors.) |
NF E51-234-2003 |
石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机 |
(Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors.) |
NF E51-235-2003 |
石油和天然气工业.包装的往复式气体压缩机 |
(Petroleum and natural gas industries - Packaged reciprocating gas compressors.) |
NF E51-240-1991 |
冷冻液用电动压缩机.容积式密闭电动压缩机组和可维修密闭电动压缩机组.性能说明 |
(REFRIGERANT MOTOR-COMPRESSORS. SEALED REFRIGERANT MOTO-COMPRESSORS AND ACCESSIBLE SEALED REFRIGERANT DISPLACEMENT MOTOR-COMPRESSORS. PRESENTATION OF PERFORMANCE.) |
NF E51-250-1981 |
压缩机.分类 |
(Compressors. Classification.) |
NF E51-290-1996 |
压缩机和真空泵.安全要求.第1部分:压缩机 |
(Compressors and vacuum pumps. Safety requirements. Part 1 : compressors.) |
NF E51-291-1996 |
压缩机和真空泵.安全要求.第2部分:真空泵 |
(Compressors and vacuum pumps. Safety requirements. Part 2 : vacuum pumps.) |
NF E51-301-2001 |
压缩空气.第1部分:杂质和纯度等级 |
(Compressed air - Part 1 : contaminants and purity classes.) |
NF E51-302-2003 |
一般用途压缩空气.第2部分:测定悬浮状油含量的试验方法 |
(Compressed air for general use - Part 2 : test methods for aerosol oil content.) |
NF E51-303-1999 |
压缩空气.第3部分:潮湿度测量试验方法 |
(COMPRESSED AIR. PART 3 : TEST METHODS FOR MEASUREMENT OF HUMIDITY.) |
NF E51-304-2002 |
压缩空气.第4部分:固体颗粒含量的试验方法 |
(Compressed air - Part 4 : test methods for solid particle content.) |
NF E51-305-2003 |
压缩空气.第5部分:油蒸汽和有机溶剂含量测试方法 |
(Compressed air - Part 5 : test method for oil vapour and organic solvent content.) |
NF E51-307-2003 |
压缩空气.第7部分:活微生物杂质含量的试验方法 |
(Compressed air - Part 7 : test method for viable microbiological contaminant content.) |
NF E51-310-1989 |
空气压缩机.规范和试验 |
(COMPRESSED AIR DRYERS. SPECIFICATIONS AND TESTS.) |
NF E51-311-1996 |
压缩空气干燥机.第2部分:性能等级 |
(Compressed air dryers. Part 2 : performances ratings.) |
NF E51-350-1994 |
风动机.词汇 |
(Pneumatic tools and machines. Vocabulary.) |
NF E51-360-1985 |
旋转,撞击和旋转撞击式气压机.运转试验 |
(Rotary and percussive pneumatic tools. Performance tests.) |
NF E51-361-1995 |
螺纹紧固件用旋转式气动装配工具.性能试验 |
(Rotary tools for threaded fastners. Performance test method.) |
NF E51-600-2003 |
建筑物通风.符号、术语和图形符号 |
(Ventilation for buildings - Symbols, terminology and graphical symbols.) |
NF E51-700-1987 |
机械控制通风构件.术语 |
(Controlled mechanical ventilation components. Terminology.) |
NF E51-708-2002 |
建筑物的通风.管道工程.软管的尺寸和机械要求 |
(Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts.) |
NF E51-711-1991 |
机械控制通风装置(VMC).机械控制通风装置的排气口.规范.规范符合性的检验 |
(CONTROLLED MECHANICAL VENTILATION (VMC) COMPONENTS. EXTRACT AIR TERMINAL DEVICES FOR VMC-GAS. CHARACTERISTICS. CHECKING OF COMPLIANCE WITH THE CHARACTERISTICS.) |
NF E51-713-1992 |
受控的机械通风(VMC)部件.VMC用抽气终端设备.特性 |
(CONTROLLED MECHANICAL VENTILATION (VMC) COMPONENTS. EXTRACT AIR TERMINAL DEVICES FOR VMC. CHARACTERISTICS.) |
NF E51-714-1998 |
建筑物通风.矩形截面薄板金属送气管和配件.尺寸 |
(VENTILATION FOR BUILDINGS. SHEET METAL AIR DUCTS AND FITTINGS WITH RECTANGULAR CROSS SECTION. DIMENSIONS. (EUROPEAN STANDARD EN 1505).) |
NF E51-715-1998 |
建筑物通风.圆形截面薄板金属送气管和配件.尺寸 |
(Ventilation for buildings. Sheet metal air ducts and fittings with circular cross section. Dimensions.) |
NF E51-717-2003 |
建筑物的通风.管道系统.环形薄金属管道的强度和泄漏 |
(Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts.) |
NF E51-718-1998 |
建筑物通风.气体终端设备.调节器和阀门的动力学试验 |
(Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves.) |
NF E51-719-1998 |
建筑用清漆.空中处理件.机械性能 |
(Ventilation for buildings. Air handling units. Mechanical performance.) |
NF E51-721-2002 |
建筑物通风.管道悬吊装置和支撑物.强度要求 |
(Ventilation for buildings - Ductwork hangers and supports - Requirements for strength.) |
NF E51-722-2001 |
建筑物通风.空气终端装置.混流设施的空气动力学试验和额定值 |
(Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application.) |
NF E51-723-2001 |
建筑物通风.空气终端装置.排代流设施的空气动力试验和额定值 |
(Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications.) |
NF E51-724-2000 |
建筑物通风.安装通风和空气调节系统的测量方法和试验规程 |
(Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems.) |
NF E51-725-2002 |
建筑物的通风.气路终端设备.恒流和变流终端设备的气动试验和测定 |
(Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units.) |
NF E51-726-2002 |
建筑物的通风.终端.固定百叶窗经受模拟雨的性能试验 |
(Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain.) |
NF E51-727-2002 |
建筑物的通风.输气设备.设备及零部件的额定特性和性能 |
(Ventilation for buildings - Air handling units - Ratings and performance for units, components and sections.) |
NF E51-730-2001 |
建筑物通风.终端.以模拟砂为条件的烟囱的性能试验 |
(Ventilation for buildings - Terminals - Performance testing of louvres subject to simulated sand.) |
NF E51-731-2002 |
建筑物的通风.在通风孔中测量空气速度用的仪器要求 |
(Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces.) |
NF E51-733-2003 |
建筑物通风.非金属管.绝缘制管板材制成的管道设施 |
(Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards.) |
NF E51-737-2001 |
建筑物通风.地板固定空气终端装置.结构分级试验 |
(Ventilation for buildings - Floor mounted air terminal devices - Tests for structural classification.) |
NF E52-016-2001 |
起重机.使用和试验信息.第1部分:指导 |
(Cranes - Information for use and testing - Part 1 : instructions.) |
NF E52-017-2000 |
起重机.使用和试验的信息.第2部分:标记 |
(Cranes - Information for use and testing - Part 2 : marking.) |
NF E52-019-2-2000 |
提升设备.控制装置.设计和特性.第2部分:流动式起重机的基本装配和要求 |
(Lifting appliance - Controls - Layout and characteristics - Part 2 : basic arrangement and requirements for mobile cranes.) |
NF E52-030-1987 |
起重配件.碳钢尖嘴和杆的吊钩 |
(LIFTING APPLIANCES. SHANK HOOK MADE OF CARBON STEEL.) |
NF E52-031-1987 |
起重配件.合金钢尖嘴和杆的吊钩 |
(LIFTING APPLIANCES. SHANK HOOK MADE OF ALLOYED STEEL.) |
NF E52-032-1973 |
最大毛重30.480T集装箱提升钩装置.规范 |
(DEVICE WITH HOOKS FOR LIFTING FREIGHT CONTAINERS OF UP TO 30.480 TONNES CAPACITY. REQUIREMENTS.) |
NF E52-034-1987 |
起重配件.带尖嘴和眼环的吊钩.M级吊钩 |
(LIFTING APPLIANCES. LIFTING HOOKS WITH POINT AND EYE. HOOKS OF GRADE M.) |
NF E52-037-1-2000 |
吊链件.安全性.第1部分:锻压钢件.8级 |
(Components for slings - Safety - Part 1 : forged steel component - Grade 8.) |
NF E52-037-2-2000 |
吊链件.安全性.第2部分:有栓的锻压钢提钩.8级 |
(Components for slings - Safety - Part 2 : forged steel lifting hooks with latch - Grade 8.) |