标准号 |
中文名称 |
英文名称 |
NF E60-134-1-2000 |
机械工具.冲模放电机器的试验条件.术语和精度试验.第1部分:单柱机 |
(Machines tools - Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 1 : single column machines (cross slide table type and fixed table type).) |
NF E60-134-2-2000 |
机械工具.冲模放电机器的试验条件.术语和精度试验.第2部分:双柱机 |
(Machines tools - Test conditions for die sinking electro-discharge machines (EDM) -Terminology and testing of the accuracy - Part 2 : two column machines (slide-head type and cross-slide table type).) |
NF E60-135-1996 |
立式单轴转塔坐标钻床的试验条件.精度试验 |
(Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle. Testing of the accuracy.) |
NF E60-136-1-2000 |
带垂直心轴和固定高度台面的高精度转动架和与心轴相配的钻孔机的试验条件.精度试验.第1部分:单柱机型 |
(Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Part 1 : single column) |
NF E60-136-2-2000 |
带垂直心轴和固定高度台面的高精度转动架和与心轴相配的钻孔机的试验条件.精度试验.第2部分:带移动台面的便 |
(Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Part 2 : portal type ma) |
NF E60-137-1996 |
机床机械分度头的验收条件.精度检验 |
(Acceptance conditions of mechanical dividing heads for machine tools. Testing of accuracy.) |
NF E60-138-1993 |
滚齿机的验收条件.精度的检验 |
(Acceptance conditions for gear hobbing machines. Testing of the accuracy.) |
NF E60-140-2000 |
机床.金属线放电加工机床的试验条件.术语和准确度试验 |
(Machine tools - Test conditions for wire electrical discharge machines (wire EDM) - Terminology and testing of the accuracy.) |
NF E60-141-1983 |
机床.卧式内面拉床验收条件和名称.精确度检验 |
(Acceptance conditions and nomenclature for horizontal internal broaching machines. Testing of accuracy.) |
NF E60-142-1985 |
立式内面拉床.验收条件和名称.精确度检验 |
(Machine tools. Broaching machines of vertical internal type. Acceptance conditions and nomenclature. Testing of accuracy.) |
NF E60-143-1985 |
立式外面拉床.验收条件和名称.精确度检验 |
(Machine tools. Vertical surface broaching machines. Acceptance conditions and nomenclature. Testing of accuracy.) |
NF E60-144-2001 |
机床试验规程.第3部分:热效应的测定 |
(Test code for machine tools - Part 3 : determination of thermal effects.) |
NF E60-145-2003 |
机床检验通则.第6部分:体和面对角线的定位准确度的测定(数字位移试验) |
(Test code for machines tools - Part 6 : determination of positioning accuracy on body and face diagonals (Digital displacement tests).) |
NF E60-150-1965 |
机车.车间计量学原理 |
(MACHINE TOOLS. PRINCIPLES OF WORKSHOP METROLOGY.) |
NF E60-163-2000 |
机床.桥型铣床的试验条件.精度试验.第1部分:固定桥(门架形)机床 |
(Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Part 1 : fixed bridge (portal-type) machines.) |
NF E60-164-1988 |
通用移动式龙门铣床.验收条件和精确度检验 |
(Machine-tools. Plano-milling machines, portal type. Acceptance conditions and testing of accuracy.) |
NF E60-165-1989 |
航空型移动式龙门铣床.验收条件.精确度检验 |
(Machine-tools. Portal type plano-milling machines for aeronautical use. Acceptance conditions. Testing of accuracy.) |
NF E60-172-2-2001 |
组合加工中心机床的试验条件.第2部分:带垂直主轴或带垂直旋转主轴通用头的机器的几何试验(垂直的Z轴) |
(Test conditions for machining centres - Part 2 : geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis).) |
NF E60-172-4-1998 |
组合加工中心机床的试验条件.第4部分:线性和旋转轴定位的精度和可重复性 |
(Test conditions for machining centres. Part 4 : accuracy and repetability of positioning of linear and rotary axes.) |
NF E60-172-5-1998 |
组合加工中心机床的试验条件.第5部分:工件夹紧盘定位的精度和可重复性 |
(Test conditions of machining centres. Part 5 : accuracy and repeatability of positioning of work-holding pallets.) |
NF E60-172-6-1998 |
组合加工中心机床的试验条件.第6部分:走刀量、速度和插入动作的准确度 |
(Test conditions for machining centres. Part 6 : accuracy of feeds, speeds and interpolations.) |
NF E60-172-7-1998 |
组合加工中心机床的验收条件.第7部分:成品试验件的精度 |
(Test conditions for machining centres. Part 7 : accuracy of a finished test piece.) |
NF E60-172-8-2001 |
组合加工中心机床的试验条件.第8部分:评价三维坐标平面上轮廓性能 |
(Test conditions for machining centres - Part 8 : evaluation of the contouring performance in the three coordinate planes.) |
NF E60-172-9-2001 |
组合加工中心机床的试验条件.第9部分:工具和垫板转换的操作时间的评价 |
(Test conditions for machining centres - Part 9 : evaluation of the operating times of tool change and pallet change.) |
NF E60-181-2001 |
生产系统.验收条件.单件生产稳定性评价方法 |
(Manufacturing systems - Acceptance conditions - Piece manufacture suitability evaluation method.) |
NF E60-182-2002 |
制造系统.性能读数.高架设备效率.球体设备效率.经济设备效率 |
(Manufacturing systems - Performance indications - Overall equipment effectiveness (TRS) - Global equipment effectiveness (TRG) - Economic equipment effectiveness (TRE).) |
NF E60-202-1996 |
机床.润滑系统 |
(Machine-tools. Lubrification systems.) |
NF E60-270-1991 |
金属切屑机床.测量噪声用的工作条件.一般条件 |
(Chip removing machine-tools. Conditions of working for measurement of noise. General conditions.) |
NF E60-272-1991 |
机床.测量噪音的常规工作条件.铣床 |
(Machine tools. Conventional working conditions for measurement of noise. Milling machines.) |
NF E60-273-1991 |
机床.测量噪音的常规工作条件.车床 |
(Machine tools. Conventional working conditions for measurement of noise. Turning machines.) |
NF E60-276-1990 |
机床.噪音测量的常规工作条件.带锯刀的研磨机切断机床 |
(Machine-tools. Conventional working conditions for measurement of noise. Grinder-cutting-off machines with cuttersaws.) |
NF E60-400-2002 |
机床.安全性.固定式磨床 |
(Machine-tools - Safety - Stationary grinding machines.) |
NF E60-406-2001 |
机床的安全.钻床 |
(Safety of machine tools - Drilling machines.) |
NF E60-407-1987 |
金属切削机床.手工进刀锯床.机械危险的防护 |
(METAL CUTTING MACHINES. CUTTING-OFF MACHINES WITH MILLING SAW WITH MANUAL ADVANCE. PREVENTION OF MECHANICAL HAZARDS.) |
NF E60-415-1989 |
机床.车床和顶心.保护装置强度的试验 |
(MACHINES TOOLS. LATHES AND TURNING CENTRES. STRENGTH TESTS FOR GUARDS.) |
NF E60-416-2001 |
机床的安全.小型数控转向机和转向中心 |
(Safety of machine tools - Small numerically controlled turning machines and turning centres.) |
NF E60-416/A1-2003 |
机床的安全.小型数字控制的转向车床和转向中心 |
(Safety of machine tools - Small numerically controlled turning machines and turning centres.) |
NF E60-417-2001 |
机床的安全.大型数字控制的转向车床和转向中心 |
(Safety of machine tools - Large numerically controlled turning machines and turning centres.) |
NF E60-418-2001 |
机床的安全.带和不带自动控制的手控车床 |
(Safety of machine-tools - Manually controlled turning machines with or without automatic control.) |
NF E60-420-2001 |
机床.安全.组合加工中心机床 |
(Machine tools - Safety - Machining centres.) |
NF E60-421-2001 |
机床的安全.铣床(包括镗孔机) |
(Safety of machine-tools - Milling machines (including boring machines).) |
NF E60-425-2002 |
机床.安全性.多轴自动车床 |
(Machine tools - Safety - Multi-spindle automatic turning machines.) |
NF E60-450-2001 |
机床.安全.放电机床 |
(Machine tools - Safety - Electro Discharge Machines.) |
NF E60-601-1997 |
机械装置的安全.激光加工机械.安全要求 |
(Safety of machinery. Laser processing machines. Safety requirements.) |
NF E61-051-1991 |
J9501操纵器.总遥控操纵器.机械控制伺服装置 |
(Telemanipulators. Master-slave mechanically controlled telemanipulators.) |
NF E61-100-1996 |
操作工业机器人的词汇 |
(Manipulating industrial robots. Vocabulary.) |
NF E61-103-1998 |
操纵工业机器人.性能指标和有关试验方法 |
(Manipulating industrial robots. Performance criteria and related test methods.) |
NF E61-105-2002 |
操作工业机器人.带抓爪的物料搬运.词汇和特征表示 |
(Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics.) |
NF E61-131-1997 |
操作工业机器人.机械界面.第1部分:板(A式)(欧洲标准EN ISO 9409-1) |
(Manipulating industrial robots. Mechanical interfaces. Part 1 : plates (form A).) |
NF E61-132-2003 |
操作型工业机器人.机械接口.第2部分:轴 |
(Manipulating industrial robots - Mechanical interfaces - Part 2 : shafts.) |
NF E61-135-1998 |
控制型工业机器人.自动和效果交换器.词汇和特性说明 |
(MANIPULATING INDUSTRIAL ROBOTS. AUTOMATIC END EFFECTOR EXCHANGE SYSTEMS. VOCABULARY AND PRESENTATION OF CHARACTERISTICS. (EUROPEAN STANDARD EN ISO 11593).) |
NF E61-187-2003 |
操纵工业机器人.机器人程序设计和操纵的图形使用者接口 |
(Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R).) |
NF E62-102-1992 |
机床.自动定心双瓜夹头.互控尺寸和验收规范 |
(Self-centring chucks for machine tools with two piece jaws (tongue and groove type). Sizes for interchangeability and acceptance test specifications.) |
NF E62-103-1991 |
机床.夹头卡爪的花键.检验尺寸.安装 |
(Machine tools. Serrations for jaw chucks. Test dimensions. Assembly.) |
NF E62-105-1997 |
机床.车床顶尖.互换尺寸 |
(Machine tools. Lathe centres. Sizes for interchangeability.) |
NF E62-109-2002 |
机床.主轴头和干燥机架卡盘的连接尺寸.第1部分:圆锥形连接 |
(Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1 : conical connection.) |
NF E62-110-1997 |
车床切削工具.轴头和面板.可互换性尺寸.第2部分:凸轮锁型 |
(Machine-tools. Spindle noses and face plates . Sizes for interchangeability. Part 2 : camlock type.) |
NF E62-111-1976 |
车床主轴头部和卡盘.卡口型 |
(LATHE SPINDLE NOSES AND BACK PLATES. TYPE BAYONET.) |
NF E62-116-1986 |
磨床.砂轮安装用法兰盘.设计规则.试验 |
(GRINDING MACHINES. FLANGES FOR THE MOUNTING OF GRINDING WHEELS. DESIGN RULES. TESTING METHOD.) |
NF E62-151-1982 |
机床.往复式金属锯床.尺寸.能力 |
(MACHINE TOOLS. HACK-SAWING MACHINES. DIMENSIONS. RATINGS.) |
NF E62-152-1983 |
机床.立式金属带锯床.尺寸.能力 |
(MACHINE TOOLS. VERTICAL BAND SAWS. DIMENSIONS. CAPACITIES.) |
NF E62-153-1983 |
机床.卧式金属带锯床.尺寸.能力 |
(MACHINE TOOLS. HORIZONTAL BAND SAWS. DIMENSIONS. CAPACITIES .) |
NF E62-154-1985 |
机床.往复式金属锯床.验收条件.精确度检验 |
(MACHINE TOOLS. HACK SAWING MACHINES. ACCEPTANCE CONDITIONS. TESTING OF ACCURACY.) |
NF E62-155-1985 |
机床.立式金属带锯床.验收条件.精确度检验 |
(MACHINE TOOLS. VERTICAL BAND SAWS. ACCEPTANCE CONDITIONS. TESTING OF ACCURACY.) |
NF E62-156-1985 |
机床.卧式金属带锯床.验收条件,精确度检验 |
(MACHINES TOOLS. HORIZONTAL BAND SAWS. ACCEPTANCE CONDITIONS. TESTING OF ACCURACY.) |
NF E62-181-1983 |
机床.立式内拉床.名称,尺寸,特征 |
(MACHINE TOOLS. VERTICAL INTERNAL BROACHING MACHINES. DESIGNATION. DIMENSIONS. CHARACTERISTICS.) |
NF E62-182-1983 |
机床.卧式内拉床.名称,尺寸,特征 |
(MACHINE TOOLS. HORIZONTAL INTERNAL BROACHING MACHINES. DESIGNATION. DIMENSIONS. CHARACTERISTICS.) |
NF E62-183-1983 |
拉削用的四个锁销的尾挂钩头.第1部分:综合 |
(PULLERS WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 1 : GENERAL.) |
NF E62-184-1983 |
拉削用的四个锁销的前挂钩头.第2部分:直径6到25的主轴用挂钩头尺寸和特征 |
(PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 2 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BORACHES OF DIAMETERS 6 TO 25.) |
NF E62-185-1983 |
拉削用的四个锁销的尾挂钩头.第3部分:直径28到32的主轴用挂钩头尺寸和特征 |
(PULLERS WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 3 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 28 TO 32.) |
NF E62-186-1983 |
拉削用的四个锁销的尾挂钩头.第4部分:直径36到40的主轴用挂钩头尺寸和特征 |
(PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 4 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 36 TO 40.) |
NF E62-187-1983 |
拉削用的四个锁销的尾挂钩头.第5部分:直径45到50的主轴用挂钩头尺寸和特征 |
(PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 5 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 45 TO 50.) |
NF E62-188-1983 |
拉削用的四个锁销的尾挂钩头.第6部分:直径56到63的主轴用挂钩头尺寸和特征 |
(PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 6 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 56 TO 63.) |
NF E62-189-1983 |
拉削用的四个锁销的尾挂钩头.第7部分:直径70到80的主轴用挂钩头尺寸和特征 |
(PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 7 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 70 TO 80.) |
NF E62-196-1989 |
机床.内孔后推式拉削刀具端头.SW型.W形状.第1部分:概论 |
(MACHINE-TOOLS. RETRIEVER FOR INTERNAL PUSH TYPE BROACHING WITH FULL ENDS,SHAPE W. PART 1 : GENERAL.) |
NF E62-197-1989 |
机床.U或V形尾端的内推式拉削的UV 型顶推头.第1部分:概论 |
(MACHINES-TOOLS. PUSHING HEAD TYPE UV FOR INTERNAL PUSH TYPE BROACHING WITH TAIL ENDS,SHAPE U OR V. PART 1 : GENERAL.) |
NF E62-201-1996 |
机床结构的组合件.旋转工作台和旋转工作台的多边中心支座 |
(Modular unit for machine tool construction. Rotary tables and multi-sided centre bases for rotary tables.) |
NF E62-202-1996 |
机床结构的组合件.主轴箱 |
(Modular units for machine tool construction. Headstocks.) |
NF E62-203-1996 |
组合机床通用部件.滑动组件 |
(Modular units for machine tool construction. Slide units.) |
NF E62-204-1996 |
组合机床通用部件.多轴端部.箱体和输入轴尺寸 |
(Modular units for machine tool construction. Multi-spindle heads. Casing and input drive shaft dimensions.) |
NF E62-206-1996 |
机床结构的组合件.中心座和立柱 |
(Modular units for machine tool construction. Centre bases and columns.) |
NF E62-207-1996 |
机床结构的组合件.滑动组件的翼板座 |
(Modular units for machine tool construction. Wing bases for slide units.) |
NF E62-208-1997 |
机床切削工具结构用标准化构件.圆柱用翅基 |
(Modular units for machine-tools construction. Wing base for columns.) |
NF E62-209-1997 |
机床切削工具结构用标准化构件.安装多轴头用榫舌驱动和法兰 |
(Modular units for machines-tools construction. Tenon drive and flanges for mounting multi-spindle heads.) |
NF E62-210-1976 |
机床构造标准部件.多轴头.钻床主轴.概论 |
(UNIT HEADS. MULTI SPINDLE HEADS. DRILLING SPINDLES. GENERAL.) |
NF E62-211-1976 |
机床构造标准部件.多轴头.光端单钻床主轴 |
(UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE PLAIN END DRILLING SPINDLES.) |
NF E62-212-1976 |
机床构造标准部件.多轴头.螺纹端单钻床主轴 |
(UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE THREADED END DRILLING SPINDLES.) |
NF E62-213-1976 |
机床构造标准部件.多轴头.光滑端面钻床传动轴 |
(UNIT HEADS. MULTI SPINDLE HEADS. DRIVEN PLAIN AND DRILLING SPINDLES.) |
NF E62-214-1976 |
机床构造标准部件.多轴头.螺纹端面钻床传动轴 |
(UNIT HEADS. MULTI SPINDLE HEADS. DRIVEN THREADED END DRILLING SPINDLES.) |
NF E62-220-1976 |
机床构造标准部件.多轴头.攻螺纹轴.通用系列.概论 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. TAPPING SPINDLES. NORMAL SERIES. GENERAL.) |
NF E62-221-1976 |
机床构造标准部件.多轴头.攻螺纹轴.通用系列 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. TAPPING SPINDLES. NORMAL SERIES.) |
NF E62-225-1976 |
机床构造标准部件.多轴头.攻螺纹复制机 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. TAPPING REPRODUCERS.) |
NF E62-240-1976 |
机床构造标准部件.多轴头.中间单轴 |
(UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE CONTERSHAFTS.) |
NF E62-241-1976 |
机床构造标准部件.多轴头.中间传动轴 |
(UNIT HEADS. MULTI SPINDLE HEADS. DRIVEN COUNTERSHAFTS.) |
NF E62-245-1976 |
机床构造标准部件.多轴头.中间单轴 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. SIMPLE COUNTERSHAFTS.) |
NF E62-246-1976 |
机床构造标准部件.多轴头.中间传动轴 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. DRIVEN COUNTERSHAFTS.) |
NF E62-250-1976 |
机床构造标准部件.多轴头.简单直齿轮 |
(UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE STRAIGHT TOOTHED PINIONS.) |
NF E62-251-1976 |
机床构造标准部件.多轴头.偏心轮毂直齿轮 |
(UNIT HEADS. MULTI SPINDLE HEADS. OFFSET BOSS STRAIGHT TOOTHED PINIONS.) |
NF E62-252-1976 |
机床构造标准部件.多轴头.撑圈 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTI SPINDLE HEADS. STAYS.) |
NF E62-253-1976 |
机床构造标准部件.多轴头.密封条框环 |
(UNIT HEADS. MULTI SPINDLE HEADS. JOINT HOUSING RING.) |
NF E62-254-1976 |
机床构造标准部件.多轴头.导向装置通气孔 |
(UNIT HEADS. MULTI SPINDLE HEADS. DEFLECTOR CHIMNEY.) |
NF E62-255-1976 |
机床构造标准部件.多轴头.1号和2号攻螺纹轴上的直齿主动齿轮 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. CONTROL STRAIGHT-TOOTHED PINIONS FOR TAPPING SPINDLES NO 1 AND 2.) |
NF E62-256-1976 |
机床构造标准部件.多轴头.3号和4号攻螺纹轴上的直齿主动齿轮 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. CONTROL STRAIGHT-TOOTHED PINIONS FOR TAPPING SPINDLES NO 3 AND 4.) |
NF E62-257-1976 |
机床构造标准部件.多轴头.简单直齿轮 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. SIMPLE STRAIGHT-TOOTHED PINIONS.) |
NF E62-258-1976 |
机床构造标准部件.多轴头.偏心轮毂直齿轮 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. OFFSET BOSS STRAIGHT-TOOTHED PINIONS.) |
NF E62-259-1976 |
机床构造标准部件.多轴头.平台 |
(MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. THRUST BEARINGS.) |
NF E62-260-1971 |
机床构造标准部件.多轴头.调整套.组件 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION.MULTI-SPINDLE HEADS.ADJUSTABLE ADAPTORS.ASSEMBLIES.) |
NF E62-265-1976 |
机床构造标准部件.多轴头.调整套的螺帽 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. NUTS FOR MULTI-SPINDLE HEADS.) |
NF E62-275-1985 |
组合机床通用部件.整体导轨立柱 |
(Modular units for machine tool construction. Integral way columns.) |
NF E62-276-1985 |
组合机床通用部件.整体导轨立柱.落地式 |
(Modular units for machine tool construction. Integral way columns. Floor-mounted type.) |
NF E62-277-1996 |
机床结构的组合件.支承座 |
(Modular units for machine tool construction. Support brackets.) |
NF E62-278-1976 |
机床构造标准部件.“锥面”移动距离的夹具柄 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. TOOL-HOLDER SHANKS WITH “CONE AND FACE“ BEARING SURFACES.) |
NF E62-279-1976 |
机床构造标准部件.锥面移动距离的主轴前部 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. SPINDLE NOSES WITH “CONE AND FACE“.BEARING SURFACES.) |
NF E62-300-1977 |
机床构造标准部件.多轴头.钻孔,镗孔,攻螺纹防护装置.概论 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. DRILLING,BORING AND TAPPING TEMPLATES. GENERAL.) |
NF E62-301-1977 |
机床构造标准部件.多轴头.28和36卧式防护装置.支架:导板盖和弹簧 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. HORIZONTAL TEMPLATES 28 AND 36. SUPPORTS : COVER,GUIDE AND SPRING.) |
NF E62-303-1977 |
机床构造标准部件.多轴头.防护装置.支架.可退锁销 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. TEMPLATES. SUPPORTS : RETRACTING LOCK.) |
NF E62-304-1977 |
机床构造标准部件.多轴头.半轴瓦 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. HALF-RING.) |
NF E62-305-1977 |
机床构造标准部件,多轴头.防护装置.半边垫圈 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. TEMPLATES : HALF-WASHER.) |
NF E62-306-1977 |
机床构造标准部件.多轴头.模具.支撑销 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. TEMPLATES. KEY.) |
NF E62-307-1977 |
机床构造标准部件.多轴头.防护装置.28和36卧式防护装置.支架.行程止推螺钉 |
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. HORIZONTAL TEMPLATES 28 AND 36. SUPPORTS : STOP SCREW.) |