标准号 |
中文名称 |
英文名称 |
ANSI/NFPA 90A-2002 |
空气调节和通风系统的安装 |
(Installation of Air Conditioning and Ventilating Systems ) |
ANSI/NFPA 90B-2002 |
热空气加热器和空调系统的安装 |
(Installation of Warm Air Heating and Air Conditioning Systems ) |
ANSI/NFPA 90B-2006 |
热空气加热器和空调系统的安装标准 |
|
ANSI/NFPA 91-2004 |
物料空运的排气系统 |
|
ANSI/NFPA 914-1994 |
古建筑的修复和适当地重新使用 |
Rehabilitation and Adaptive Reuse of Historic Structures |
ANSI/NFPA 921-2004 |
火灾的调查报告 |
|
ANSI/NFPA 92A-1996 |
烟控制系统 |
Smoke Control Systems |
ANSI/NFPA 92A-2006 |
利用屏蔽和压差的烟控系统标准 |
|
ANSI/NFPA 92B-1995 |
房内、有顶走廊和大范围烟尘控制系统 |
Smoke Control Systems in Atria, Covered Malls, and Large Areas |
ANSI/NFPA 92B-2005 |
林荫道、前厅和大空间内烟雾控制系统标准 |
|
ANSI/NFPA 96-2001 |
商用烹调操作的通风控制和防火 |
Ventilation Control and Fire Protection of Commercial Cooking Operations |
ANSI/NFPA 96-2004 |
商用烹饪装置的排气控制与防火 |
|
ANSI/NFPA 97-1996 |
烟囱、通风口及生热器具的术语汇编 |
Glossary of Terms Relating to Chimneys, Vents, and Heat-Producing Appliances |
ANSI/NFPA 97-2003 |
烟囱、通风口及放热设备的术语词汇 |
(Glossary of Terms Relating to Chimneys, Vents, and Heat-Producing Appliances ) |
ANSI/NFPA 99-2002 |
保健设施 |
Health Care Facilities |
ANSI/NFPA 99-2005 |
保健设施 |
|
ANSI/NFPA 99B-2002 |
低气压设备 |
Hypobaric Facilities |
ANSI/NFPA 99B-2005 |
低气压设施 |
|
ANSI/NFSA K 93.2-1984 |
含多于1%氨的氮肥溶液的贮存和处理 |
Nitrogen Fertilizer Solutions Containing More Than 1% Free Ammonia, Storage and Handling of |
ANSI/NFSA K 93.3-1984 |
化肥工业中的磷酸的贮存和处理 |
Phosphoric Acid in the Fertilizer Industry, Storage and Handling of |
IEEE 802.16 Conformance01-2003 |
IEEE 802.16的一致性标准.第1部分:协议实现一致性声明(PICS).10-66GHz MAN-SC |
(Standard for conformance to IEEE 802.16 - Part 1: Protocol Implementation Conformance Statement (PICS); Proforma for 10-66 GHz WirelessMAN-SC) |
International Classification f |
国际标准分类法(ICS) |
() |
NF A00-001-1991 |
金属产品.检验文献的类型 |
(Metallic products - Types of inspection documents.) |
NF A00-001/A1-1997 |
NF EN 10204 1991的修改件1 |
() |
NF A00-0011-1997 |
金属产品.检验文献的类型.(欧洲标准 EN 10204).修改件1 |
() |
NF A00-100-1993 |
钢及钢制品的一般交货技术要求 |
(General technical delivery requirements for steel and steel products.) |
NF A00-500-1-1997 |
铸造.交货技术条件.第一部分:总论 |
(Founding. Technical conditions of delivery. Part 1 : general.) |
NF A00-500-3-1997 |
铸造.交货技术条件.第3部分:铸铁的补充要求 |
(Founding. Technical conditions of delivery. Part 3 : additional requirements for iron castings.) |
NF A00-500-5-1997 |
铸造.交货技术条件.第5部分:镁合金铸件的附加要求 |
(FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 5 : ADDITIONAL REQUIREMENTS FOR MAGNESIUM ALLOY CASTINGS. (EUROPEAN STANDARD EN 1559-5).) |
NF A00-500-6-1999 |
铸造.交货技术条件.第6部分:锌合金铸件的附加要求 |
(FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 6 : ADDITIONAL REQUIREMENTS FOR ZINC ALLOY CASTINGS. (EUROPEAN STANDARD EN 1559-6).) |
NF A00-501-1-1990 |
铸件.订货和供应的一般技术条件.第1部分:钢铸件 |
(FOUNDRY PRODUCTS. GENERAL TECHNICAL CONDITIONS FOR ORDERING AND SUPPLYING. PART 1 : STEEL CASTINGS.) |
NF A00-501-3-1991 |
铸件.订货和供应的一般技术条件.第3部分:通过重量压力和负压的铝合金及镁合金的铸件 |
(FOUNDRY PRODUCTS. GENERAL TECHNICAL CONDITIONS FOR ORDERING AND SUPPLYING. PART 3 : GRAVITY,LOW PRESSURE AND VACUUM CASTINGS OF ALUMINIUM ALLOYS AND MAGNESIUM ALLOYS.) |
NF A01-001-1960 |
冶金.锰矿或铬矿的取样 |
(SAMPLING OF MANGANESE OR CHROMIUM ORES.) |
NF A01-009-1986 |
铜和铜合金.材料.词汇和定义 |
(Copper and copper alloys. Materials. Terms and definitions.) |
NF A01-010-1971 |
铝和铝合金,铜和铜合金.取样、样品和试验用的试件 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. SAMPLES, SPECIMENS AND TEST PIECES.) |
NF A01-111-1986 |
铜和铜合金.半成品供应的一般技术要求 |
(Copper and copper alloys. General technical requirements of supply of semi-finished products.) |
NF A01-400-1988 |
精炼镍.分析取样 |
(REFINED NICKEL. SAMPLING FOR ANALYSIS.) |
NF A01-800-1986 |
铸造产品.在确定的化学成分中样品的制备和抽样.铸铁和铸钢 |
(FOUNDRY PRODUCTS. SAMPLING AND PREPARATION OF SAMPLES FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION. CAST STEEL AND CAST IRON.) |
NF A01-810-1975 |
锌合金锭.发射光谱分析用样品的制备和抽样 |
(Zinc alloy ingots. Selection and preparation of samples for spectrographic analysis.) |
NF A01-811-1975 |
锌锭.发射光谱分析用样品的制备和抽样 |
(Zinc ingots. Selection and preparation of samples for spectrographic analysis.) |
NF A01-820-1975 |
锌合金锭.化学分析用样品的制备和抽样 |
(Zinc alloy ingots. Selection and preparation of samples for chemical analysis.) |
NF A01-821-1975 |
锌锭.化学分析用样品的制备和抽样 |
(Zinc ingots. Selection and preparation of samples for chemical analysis.) |
NF A01-830-1973 |
镀锌.分析用样品的抽样 |
(ZINC FOR GALVANIZING PURPOSES. SAMPLING FOR ANALYSIS.) |
NF A02-001-1997 |
铸造.铸铁的设计系统.材料符号及材料标准号 |
(Founding. Designation system for cast iron. Material symbols and material numbers.) |
NF A02-002-1976 |
有色金属和非铸铁合金制造方式和交货条件常用名称 |
(CONVENTIONAL DESIGNATION OF THE METHODS OF MANUFACTURE AND DELIVERY STATES OF CAST NON FERROUS METALS AND ALLOYS.) |
NF A02-005-1-1992 |
钢的命名体系.第1部分:钢名.基本符号 |
(Designation systems for steel. Part 1 : steel names, principal symbols.) |
NF A02-005-2-1992 |
钢的命名体系.第2部分:标准号体系 |
(Designation systems for steels. Part 2 : numerical system.) |
NF A02-006-1996 |
铜和铜合金.欧洲材料号码系统 |
(COPPER AND COPPER ALLOYS. EUROPEAN NUMBERING SYSTEM. (EUROPEAN STANDARD EN 1412).) |
NF A02-007-1973 |
镁和镁合金制半成品.交货条件的常用名称 |
(SEMI-FINISHED PRODUCTS MADE OF MAGNESIUM AND MAGNESIUM ALLOYS. TEMPER DESIGNATION.) |
NF A02-008-1996 |
铜和铜合金.材料条件或回火硬度标识 |
(Copper and copper alloys. Material condition or temper designation.) |
NF A02-009-1986 |
铜和铜合金.材料.常用名称与符号 |
(Copper and copper alloys. Materials. Conventional designation.) |
NF A02-010-1994 |
铁制品的热处理词汇 |
(Vocabulary of heat treatment terms for ferrous products.) |
NF A02-011-1970 |
铝及铝合金.热处理和机械处理的词汇 |
(ALUMINIUM AND ALUMINIUM ALLOYS. VOCABULARY OF HEAT TREATMENTS AND MECHANICAL TREATMENTS.) |
NF A02-025-2000 |
钢等级的定义和分类 |
(Definition and classification of grades of steel.) |
NF A02-120-1994 |
铝和铝合金.锻制产品的化学成分和产品形状.第1部分:数字命名系统 |
(Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 1 : numerical designation system.) |
NF A02-120-3-2003 |
铝和铝合金.化学成分和锻造产品的外形.第3部分:化学成分 |
(Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3 : chemical composition.) |
NF A02-121-1994 |
铝和铝合金.锻制产品的化学成分和外形.第2部分:基于名称与符号系统的化学符号 |
(Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 2 : chemical symbol based designation system.) |
NF A02-122-1994 |
铝和铝合金.锻制产品的化学成分和产品形状.第3部分:化学成分 |
(ALUMINIUM AND ALUMINIUM ALLOYS. CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS. PART 3 : CHEMICAL COMPOSITION. (EUROPEAN STANDARD EN 573-3).) |
NF A02-123-1994 |
铝和铝合金.锻制产品的化学成分和产品形状.第4部分:产品的形式 |
(ALUMINIUM AND ALUMIMIUM ALLOYS. CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS. PART 4 : FORM OF PRODUCTS. (EUROPEAN STANDARD EN 573-4).) |
NF A02-130-1-2003 |
铝及铝合金.再熔主合金和铸件用合金铝锭的名称与符号.第1部分:数字命名系统 |
(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1 : numerical designation system.) |
NF A02-130-2-2003 |
铝及铝合金.再熔主合金和铸件用合金铝锭的名称与符号.第2部分:基于命名系统的化学符号 |
(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2 : chemical symbol based designation system.) |
NF A02-130-3-2003 |
铝及铝合金.再熔主合金和铸件用合金铝锭的名称与符号.第3部分:化合物的书写规则 |
(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3 : writing rules for chemical composition.) |
NF A02-150-1993 |
锻铝和铝合金锻制产品名称术语 |
(Aluminium and aluminium alloys. Wrought products. Temper designations.) |
NF A03-000-2000 |
铜和铜合金.螺旋延伸数的测定 |
(Copper and copper alloys - Determination of spiral elongation number.) |
NF A03-001-2001 |
金属材料.拉伸试验.第1部分:常温试验方法 |
(Metallic materials - Tensile testing - Part 1 : method of test at ambient temperature.) |
NF A03-002-1999 |
金属材料.静态单轴向试验机的验正.第1部分:拉伸/压缩试验机 |
(Metallic materials - Verification of static uniaxial testing machines - Part 1 : tension/compression testing machines.) |
NF A03-003-2002 |
金属材料.用于验证单轴向试验机的作用力检验仪的校准 |
(Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines.) |
NF A03-004-2003 |
金属材料.单轴向试验用伸长计的校准 |
(Metallic materials - calibration of extensometers used in uniaxial testing.) |
NF A03-011-1990 |
金属材料.摆锤式冲击试验.第1部分:试验方法 |
(Metallic materials. Charpy impact test. Part 1 : test method.) |
NF A03-012-1992 |
金属材料.夏比冲击试验.第2部分:试验机的检定(冲击摆).(欧洲标准EN 10045-2) |
(Metallic materials. Charpy impact test. Part 2 : verification of the testing machine (pendulum impact).) |
NF A03-015-2001 |
钢.却贝V形切痕摆式冲击试验.仪器试验法 |
(Steel - Charpy V-notch pendulum impact test - Instrumented test method.) |
NF A03-021-1994 |
金属材料.硬度试验.第1部分:洛氏表面硬度试验.(15N、30N、45N、15T、30T和45T刻度) |
(METALLIC MATERIALS. HARDNESS TEST. PART 1 : ROCKWELL TEST (SCALES A, B, C, D, E, F, G, H, K) AND ROCKWELL SUPERFICIAL TEST (SCALES 15N, 30N, 45N, 15T, 30T AND 45T). (EUROPEAN STANDARD EN 10109-1).) |
NF A03-031-1994 |
金属材料.布氏硬度试验.第1部分:试验方法(ISO 6506-81) |
(METALLIC MATERIALS. BRINELL HARDNESS TEST. PART 1 : TEST METHOD. (EUROPEAN STANDARD EN 10003-1).) |
NF A03-035-2003 |
在高温下钢保证强度最小值的导出法 |
(Method for the derivation of minimum values of proof strength of steel at elevated temperatures.) |
NF A03-091-1994 |
金属材料.管材(全截面).弯曲试验 |
(Metallic materials. Tube (in full section). Bend test.) |
NF A03-093-1994 |
金属材料.管.拉力试验 |
(Metallic materials. Tube. Drift expanding test.) |
NF A03-096-1994 |
金属材料.管材.环形拉伸试验 |
(METALLIC MATERIALS. TUBE. RING TENSILE TEST. (EUROPEAN STANDARD EN 10237).) |
NF A03-112-1997 |
钢和钢制品.机械性能试验用的样品和试样 |
(Steel and steel products. Location and preparation of samples and test pieces for mechanical testing.) |
NF A03-117-1983 |
钢铁产品的质量检验 |
(Quality control surveillance of steel products.) |
NF A03-152-2-1999 |
金属材料.布氏硬度试验.第2部分:试验机的验证和校正 |
(Metallic materials. Brinell hardness test. Part 2 : verification and calibration of testing machines.) |
NF A03-152-3-1999 |
金属材料.布氏硬度试验.第3部分:标准试块的校正 |
(Metallic materials. Brinell hardness test. Part 3 : calibration of reference blocks.) |
NF A03-153-2-1999 |
金属材料.洛氏硬度试验.第2部分:试验机(刻度 A, B, C, D, E, F, G, H, K, N, T)的验证和校正 |
(Metallic materials. Rockwell hardness test. Part 2 : verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T).) |
NF A03-153-3-1999 |
金属材料.洛氏硬度试验.第3部分:标准试块的校正(刻度 A, B, C, D, E, F, G, H, K, N, T) |
(Metallic materials. Rockwell hardness test. Part 3 : calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T).) |
NF A03-154-1-1998 |
金属材料.维氏硬度试验.第1部分:试验方法 |
(Metallic materials. Vickers hardness test. Part 1 : test method.) |
NF A03-154-2-1998 |
金属材料.维氏硬度试验.第2部分:试验机械的校准 |
(Metallic materials. Vickers hardness test. Part 2 : verification of testing machines.) |
NF A03-154-3-1998 |
金属材料.维氏硬度试验.第3部分:标准块的校准 |
(Metallic materials. Vickers hardness test. Part 3 : calibration of reference blocks.) |
NF A03-155-1-2003 |
金属材料.硬度和材料参数的仪器压痕试验.第1部分:试验方法 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.) |
NF A03-155-2-2003 |
金属材料.硬度和材料参数的仪器压痕试验.第2部分:试验机的检定和校准 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines.) |
NF A03-155-3-2003 |
金属材料.硬度和材料参数的仪器压痕试验.第3部分:硬度标准块的校准 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks.) |
NF A03-157-1978 |
钢铁产品.钢材的弯曲试验 |
(IRON AND STEEL. BEND TEST ON STEEL.) |
NF A03-158-1978 |
钢铁产品.厚度等于或大于0.5mm和小于0.3mm的钢板与钢带的单向弯曲试验 |
(IRON AND STEEL. SIMPLE BEND TEST ON STEEL SHEET AND STRIP UNDER 3 MM THICK (FROM AND INCLUDING 0,5 MM UP TO BUT EXCLUDING 3 MM).) |
NF A03-159-2000 |
金属材料.厚度3mm或小于3mm的板材或带材.反向弯曲试验 |
(Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test.) |
NF A03-172-1980 |
钢铁产品.钢的硬度换算值 |
(Iron and steel. Conversion values of steel hardness.) |
NF A03-174-1999 |
钢.伸长值的换算.第1部分:碳素钢和低合金钢 |
(Steel. Conversion of elongation values. Part 1 : carbon and low alloy steels.) |
NF A03-175-1999 |
钢.伸长值的换算.第2部分:奥氏体钢 |
(Steel. Conversion of elongation values. Part 2 : austenitic steels.) |
NF A03-202-1967 |
灰铸铁冲击试验.(无切口两端靠紧的试样) |
(METAL PRODUCTS. MECHANICAL TESTS. GREY CAST IRON IMPACT TEST. (ON UNNOTCHED BEAM).) |
NF A03-253-1972 |
铝和铝合金.铜和铜合金.维氏硬度试验.0.2-120公斤力的试验负荷 |
(Aluminium and aluminium alloys. Copper and copper alloys. Vicker hardness. Test-loads ranging from 0,2 to 120 kgf.) |
NF A03-260-1972 |
铝和铝合金.铜和铜合金.简单弯曲折叠试验 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. ORDINARY BENDING TEST.) |
NF A03-263-1983 |
铜.毛细钎焊圆管的弯曲试验 |
(COPPER. BENDING TEST FOR ROUND TUBES FOR CAPILLARY BRAZING AND SOLDERING.) |
NF A03-268-1971 |
铝和铝合金.铜和铜合金.线材的简单扭转试验 |
(ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. SIMPLE TORSION TEST FOR WIRE.) |
NF A03-301-2002 |
铸件.图像分析法测量均差.含5%-11%硅的铝铸件 |
(Founding - Measurement of the mean intercept using image analysis - Aluminium castings with a 5 to 11 content % of silicium.) |
NF A03-355-1985 |
钢铁产品.蠕变试验 |
(Steel products. Creep test.) |
NF A03-356-1999 |
金属材料 |
(Metallic materials.) |
NF A03-400-1983 |
钢铁产品.疲劳试验.一般原则.` |
(Iron and steel. General principles of the fatigue test.) |
NF A03-401-1983 |
钢铁产品.轴向载荷疲劳试验 |
(Iron and steel. Fatigue test by axial loading.) |
NF A03-402-1983 |
钢铁产品.回转弯曲疲劳试验 |
(Iron and steel. Fatigue test by rotary flexion.) |
NF A03-509-1983 |
钢铁产品.疲劳试验机的校准 |
(Iron and steel. Calibration of fatigue test machines.) |
NF A03-604-1977 |
铸造制品-金属铸块.铁切削性试验 |
(FOUNDRY PRODUCTS-PIGS.IRON-MACHINABILITY TESTING.) |
NF A03-652-2003 |
金属材料.薄板材和带材.埃里克森压凹试验 |
(Metallic materials - Sheet and strip - Erichsen cupping test.) |
NF A03-657-1987 |
钢铁产品.挤压试验时,钢冷变形性能的检验 |
(Iron and steel products. Steel cold ductility determination. Compression test.) |
NF A03-658-2001 |
钢铁.钢薄板和板材塑性应变比值γ的测定方法 |
(Iron and steel - Methode of determination of the plastic strain ration r of steel sheet and plate.) |
NF A03-659-2001 |
钢铁.钢薄板和板材拉伸应力硬化指数n的测定方法 |
(Iron and steel - Method of determination of the tensile strain hardening exponent n of steel sheet and plate.) |
NF A03-660-1985 |
钢制产品.用封闭冲压坯冲压带材或30mm-90mm宽带钢的试验 |
(STEEL PRODUCTS. CUPPING TEST WITH CLAMPED BLANKS FOR STRIP. WIDTH RANGE : FROM 30 MM TO 90 MM EXCLUDED.) |
NF A03-702-1962 |
钢铁产品.线材试验.铁丝和钢丝的锡涂层试验 |
(IRON AND STEEL PRODUCTS. TESTING OF TIN COATINGS ON IRON AND STEEL THREAD.) |
NF A03-707-1973 |
钢铁产品.线材试验.线材的简单扭转试验 |
(SIMPLE TORSION TESTING OF STEEL WIRES.) |
NF A03-720-1-2002 |
混凝土的加筋和预应力用钢.试验方法.第1部分:加筋棒、钢丝杆和钢丝 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 1 : reinforcing bars, wire rod and wire.) |
NF A03-720-2-2002 |
混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接纤维 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 2 : welded fabric.) |
NF A03-720-3-2002 |
混凝土的钢筋和预应力用钢.试验方法.第3部分:预应力钢 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 3 : prestressing steels.) |
NF A03-750-2000 |
金属材料.张力的单轴蠕变试验.试验方法 |
(Metallic materials - Uniaxial creep testing in tension - Method of test.) |
NF A03-760-1-2003 |
金属材料.拉伸应力松弛试验.第1部分:试验机规程 |
(Metallic materials - Tensile stress relaxation testing - Part 1 : procedure for testing machines.) |