标准号 |
中文名称 |
英文名称 |
| NF S91-215-2000 |
牙科.树脂填充的、可修复的嵌入材料 |
Dentistry - Polymer-based filling, restorative and luting materials. |
| NF S91-217-1996 |
牙科学.陶瓷托牙牙齿 |
Dentistry - Ceramic denture teeth. |
| NF S91-217/A1-2000 |
牙科学.陶瓷义齿 |
(Dentistry - Ceramic denture teeth.) |
| NF S91-218-2000 |
铸牙用贵金属含量介于25%-75%之间的合金 |
Dental casting alloys with noble metal content of at least 25 % but less than 75 %. |
| NF S91-219-1992 |
以丁子香酚氧化锌为基础的牙齿粘固剂和以无丁香酚氧化锌为基础的牙齿 粘固剂 |
Dental zinc oxide/eugenol cements and zinc oxide non-eugenol cements. |
| NF S91-220-1992 |
牙科工艺.以石膏为基础的牙科产品 |
DENTISTRY. DENTAL GYPSUM PRODUCTS. (EUROPEAN STANDARD EN 26873). |
| NF S91-222-1-1997 |
牙科基本金属铸造合金.第1部分:钴基合金(欧洲标准EN ISO 6871-1) |
Dental base metal casting alloys. Part 1 : cobalt-based alloys. |
| NF S91-222-2-1997 |
牙科基本金属铸造合金.第2部分:镍基合金(欧洲标准EN ISO 6871-2) |
Dental base metal casting alloys. Part 2 : nickel-based alloys. |
| NF S91-223-2001 |
牙科学.弹性印模材料 |
Dentistry - Elastomeric impression materials. |
| NF S91-224-1998 |
牙科工艺.用于牙科的医疗装置的生物配伍性预诊评估.牙科材料的试验方法 |
Dentistry. Preclinical evaluation of biocompatibility of medical devices used in dentistry. Test methods for dental materials. |
| NF S91-226-2003 |
牙科牙根管充填材料 |
Dental root canal sealing materials. |
| NF S91-227-1998 |
牙科用牙根管充填针 |
Dental root-canal obturating points. |
| NF S91-228-2001 |
牙科用石膏粘接铸造熔模 |
Dental gypsum-bonded casting investments. |
| NF S91-231-1998 |
牙科吸收点 |
(Dental absorbent points.) |
| NF S91-232-1990 |
牙科工艺.牙钻.试验方法 |
Dentistry. Dental rotary instruments. Test methods. |
| NF S91-233-2000 |
牙科金属陶瓷修补材料 |
Metal-ceramic dental restorative systems. |
| NF S91-234-1994 |
牙科学.可移动假牙弹性衬里材料.第1部分:短期材料(EN 30139-1) |
(DENTISTRY. RESILIENT LINING MATERIALS REMOVABLE DENTURES. PART 1 : SHORT-TERM MATERIALS. (EUROPEAN STANDARD EN 30139-1).) |
| NF S91-235-1999 |
牙科用磷酸酯粘结铸造包埋材料 |
(DENTAL PHOSPHATE-BONDED CASTING INVESTMENTS. (EUROPEAN STANDARD EN ISO 9694).) |
| NF S91-236-1991 |
牙科用钎焊制品.(欧洲标准 EN 29333) |
(DENTAL BRAZING MATERIALS. (EUROPEAN STANDARD EN 29333).) |
| NF S91-237-2000 |
牙科材料.颜色稳定性的测定 |
(Dental materials - Determination of colour stability.) |
| NF S91-238-1996 |
牙科学.高聚物基的牙冠和齿桥材料 |
(DENTISTRY. POLYMER-BASED CROWN AND BRIDGE MATERIALS. (EUROPEAN STANDARD EN ISO 10477).) |
| NF S91-238/A1-2000 |
牙科学.高聚物基的牙冠和齿桥材料 |
(Dentistry - Polymer-based crown and bridge materials.) |
| NF S91-240-2000 |
牙科学.可逆性和不可逆性水胶体印模材料系统 |
(Dentistry - Reversible-irreversible hydrocolloid impression material systems.) |
| NF S91-242-2002 |
牙科学.活动义齿软衬材料.第2部分:长期使用的材料 |
Dentistry - Soft lining materials for removable dentures - Part 2 : materials for long-term use. |
| NF S91-243-2002 |
牙科用金属材料.抗腐蚀试验方法 |
(Dental metallic materials - Corrosion test methods.) |
| NF S91-245-1999 |
牙科硅酸乙脂粘接铸造包埋料 |
(DENTAL ETHYL SILICATE BONDED CASTING INVESTMENTS. (EUROPEAN STANDARD EN ISO 11246).) |
| NF S91-246-2000 |
牙科修复.磷酸化合耐高温代型材料 |
(Dental restorations - Phosphate-bonded refractory die materials.) |
| NF S91-248-2000 |
牙科基板/造型蜡 |
(Dental baseplate/modelling wax.) |
| NF S91-249-1997 |
牙科陶瓷熔凝的金属修复合金 |
(DENTAL CERAMIC FUSED TO METAL RESTORATIVE ALLOYS.) |
| NF S91-300-1996 |
牙科学.牙科用医疗装置.设备 |
(Dentistry. Medical devices for dentistry. Equipment.) |
| NF S91-301-1983 |
牙科器械.工作岗位上的牙科器械部件.符号识别系统 |
(Dental equipment. Items of dental equipment at the working place. Identification system.) |
| NF S91-302-1997 |
牙科病人用椅子 |
(Dental patient chair.) |
| NF S91-303-1997 |
牙科综合治疗设备 |
(Dental units.) |
| NF S91-304-2000 |
牙科操作人员凳子 |
(Dental operator’s stool.) |
| NF S91-305-1996 |
牙科工作灯 |
(Dental operating light.) |
| NF S91-307-1996 |
牙科设备.图形符号 |
(DENTAL EQUIPMENT. GRAPHICAL SYMBOLS. (EUROPEAN STANDARD EN ISO 9687).) |
| NF S91-308-2001 |
牙科设备.高和中容量的抽吸系统. |
(Dental equipment - High- and medium-volume suction systems.) |
| NF S91-310-1997 |
牙科设备.汞、合金混合器和分配器(欧洲标准EN ISO 8282) |
(DENTAL EQUIPMENT. MERCURY AND ALLOY MIXERS AND DISPENSERS. (EUROPEAN STANDARD EN ISO 8282).) |
| NF S91-312-2003 |
牙科学.汞齐合金胶囊 |
(Dentistry - Dental amalgam capsules.) |
| NF S91-313-1997 |
牙科设备.给排水管接头 |
(Dental equipment. Connections for supply and waste lines.) |
| NF S91-401-1990 |
牙科工艺.牙刷硬度指数 |
(Dentistry. Stiffness of the tuftec area of tooth-brushes.) |
| NF S91-407-1998 |
牙科医学.牙膏.要求、试验方法和作标记 |
(Dentistry. Toothpastes. Requirements, test methods and marking.) |
| NF S92-010-2001 |
专业用活体外诊断剂的生产商提供的信息 |
(Information supplied by the manufacturer with in vitro diagnostic reagents for professional use.) |
| NF S92-011-2002 |
制造商提供的带有自我测试用在实验室条件下诊断试剂的信息 |
(Information supplied by the manufacturer with in vitro diagnostic reagents for self-testing.) |
| NF S92-013-1996 |
活体外诊断系统.医用和生物试样的运输包装件.要求.试验 |
(In vitro diagnostic systems. Transport packages for medical and biological specimens. Requirements, tests.) |
| NF S92-016-2001 |
专用试管诊断仪的使用说明 |
(Instructions for use for in vitro diagnostic instruments for professional use.) |
| NF S92-017-1995 |
体外诊断系统.家用体外诊断仪器使用说明的要求 |
(IN VITRO DIAGNOSTIC SYSTEMS. REQUIREMENTS FOR USER MANUALS FOR IN VITRO DIAGNOSTIC INSTRUMENTS FOR HOME USE. (EUROPEAN STANDARD EN 592).) |
| NF S92-018-1997 |
试管诊断仪器的标记要求 |
(REQUIREMENTS FOR MARKING OF IN VITRO DIAGNOSTIC INSTRUMENTS. (EUROPEAN STANDARD EN 1658).) |
| NF S92-019-1999 |
活体外医疗装置.生物起源的样品数量测量.参考测量过程展示(欧洲标准EN 12286) |
(IN VITRO MEDICAL DEVICES. MEASUREMENTS OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN. PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES. (EUROPEAN STANDARD EN 12286).) |
| NF S92-019/A1-2000 |
活体外诊断医疗装置.生物起源的样品数量测量.参考测量过程展示 |
(In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures.) |
| NF S92-021-2004 |
体外诊断医疗装置.生物试样的定量测量.校准仪和控制材料赋值的计量溯源性 |
(In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials.) |
| NF S92-022-2004 |
体外诊断医疗装置.生物样品的定量测量.校准仪和控制材料所赋酶的催化浓度值的计量溯源性 |
(In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control m) |
| NF S92-024-2002 |
自测用体外诊断医疗装置的一般要求 |
(General requirements for in vitro diagnostic medical devices for self-testing.) |
| NF S92-025-2002 |
在实验室条件下诊断医疗装置的性能评估 |
(Performance evaluation of in vitro diagnostic medical devices.) |
| NF S92-031-1996 |
体外诊断系统.体外诊断医疗装置用EN 29001、EN 46001、EN 29002和EN 46002的应用指南 |
(In vitro diagnostic systems. Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for in vitro diagnostic medical devices.) |
| NF S92-032-2002 |
实验室诊断试剂的稳定性试验 |
(Stability testing of in vitro diagnostic reagents.) |
| NF S92-033-2003 |
体外诊断医疗设备的验收试验用抽样程序.统计方面 |
(Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects.) |
| NF S92-040-1999 |
活体外诊断医疗装置.用生物染色的体外诊断试剂生产提供的信息 |
(IN VITRO DIAGNOSTIC MEDICAL DEVICES. INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY. (EUROPEAN STANDARD EN 12376).) |
| NF S92-041-2002 |
与体外诊断试剂感染有关的风险的消除或减低 |
(Elimination or reduction of risk of infection related to in vitro diagnostic reagents.) |
| NF S92-050-1997 |
体外诊断系统.微生物培养媒体.术语和定义 |
(In vitro diagnostic systems. Culture media for microbiology. Terms and definitions.) |
| NF S92-051-1999 |
实验室诊断医疗装置.微生物用培养基.培养基的性能标准 |
(In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media.) |
| NF S92-051/A1-2002 |
实验室诊断医疗装置.微生物用培养基.培养基的性能标准 |
(In vitro diagnostic medical devices - Culture media for microbiology - Performance criteria for culture media.) |
| NF S92-060-2003 |
医学实验室.质量和资格的特殊要求 |
(Medical laboratories - Particular requirements for quality and competence.) |
| NF S93-001-2-1997 |
一次性使用无菌皮下注射器.第1部分:带动力注射泵的注射器 |
(STERILE HYPODERMIC SYRINGES FOR SINGLE USE. PART 2 : SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS. (EUROPEAN STANDARD EN ISO 7886-2).) |
| NF S93-003-1994 |
一次性使用的皮下注射针.识别用色标 |
(Hypodermic needles for single use. Colour coding for identification.) |
| NF S93-004-1995 |
医疗器件制造用不锈钢针头管材 |
(STAINLESS STEEL NEEDLE TUBING FOR THE MANUFACTURE O FMEDICAL DEVICES. (EUROPEAN STANDARD EN ISO 9626).) |
| NF S93-004/A1-2001 |
医疗装置生产用不锈钢针管 |
(Stainless steel needle tubing for the manufacture of medical devices.) |
| NF S93-005-1994 |
胰岛素用有或无针头的无菌一次性使用注射器 |
(STERILE SINGLE-USE SYRINGES, WITH OR WITHOUT NEEDLE, FOR INSULIN. (EUROPEAN STANDARD EN ISO 8537).) |
| NF S93-005/A1-2001 |
胰岛素用有或无针的一次性使用无菌皮下注射器 |
(Sterile single-use syringes, with or without needle, for insulin.) |
| NF S93-007-1994 |
医用可重复使用的全玻璃或金属-玻璃注射器.第2部分:设计.性能要求和试验 |
(Reusable all-glass or metal-and-glass syringes for medical use. Part 2 : design, performance requirements and tests.) |
| NF S93-011-1993 |
注射管、注射针及其它医疗设备用的6％锥的锥形配件:第1部分:一般要求 |
Conical fittings with a 6 per cent (luer) taper for syringes, needles and certain other medical equipment. Part 1 : general requirements. |
| NF S93-0111-1998 |
1993年NF S 93-011的补充件1 |
() |
| NF S93-012-1997 |
注射器,注射针头和一定的其它医疗器械用A6%(路厄氏)锥度的锥形附件.锁定附件 |
(Conical fittings with a 6 % (LUER) taper for syringes, needles and certain other medical equipment. Lock fittings.) |
| NF S93-020-1-2001 |
医用笔式注射器.第1部分:笔式注射器.要求和试验方法 |
(Pen-injectors for medical use - Part 1 : Pen-injectors - Requirements and test methods.) |
| NF S93-020-2-2001 |
医用笔式注射器.第2部分:针.要求和试验方法 |
(Pen-injectors for medical use - Part 2 : needles - Requirements and test methods.) |
| NF S93-020-3-2001 |
医用笔式注射器.第3部分:成品容器.要求和试验方法 |
(Pen-injectors for medical use - Part 3 : finished cartridges - Requirements and test methods.) |
| NF S93-031-1-1997 |
一次性使用、无菌管内导管.第1部分:一般要求 |
(Sterile, single-use intravascular catheters - Part 1 : general requirements.) |
| NF S93-031-1/A1-2000 |
一次性无菌血管内导管.第1部分:一般要求 |
(Sterile, single-use intravascular catheters - Part 1 : general requirements.) |
| NF S93-031-2-1997 |
一次性使用、无菌管内导管.第2部分:血管造影术用导管 |
(Sterile, single-use intravascular catheters - Part 2 : angiographic catheters.) |
| NF S93-031-3-1997 |
一次性使用、无菌管内导管.第3部分:中心静脉导管 |
(Sterile, single-use intravascular catheters - Part 3 : central venous catheters.) |
| NF S93-031-4-1997 |
一次性使用、无菌管内导管.第4部分:球形扩张导管 |
(Sterile, single-use intravascular catheters - Part 4 : balloon dilatation catheters.) |
| NF S93-031-5-1997 |
一次性使用、无菌管内导管.第5部分:与针头相连的辅助导管 |
(Sterile, single-use intravascular catheters - Part 5 : over-needle peripheral catheters.) |
| NF S93-031-5/A1-2001 |
一次性使用的无菌管内导管.第5部分:与针头相连的辅助导管 |
(Sterile, single-use intravascular catheters - Part 5 : over-needle peripheral catheters.) |
| NF S93-036-1999 |
一次性无菌管内导管导引器(EN ISO 11070) |
(STERILE SINGLE-USE INTRAVASCULAR CATHETER INTRODUCERS. (EUROPEAN STANDARD EN ISO 11070).) |
| NF S93-037-1999 |
只用于对外周内导管的灭菌方法 |
(STERILE OBTURATORS FOR SINGLE USE WITH OVER-NEEDLE PERIPHERAL INTRAVASCULAR CATHETERS.) |
| NF S93-041-1997 |
一次性使用的无菌排尿导管及附属设备(欧洲标准EN 1617) |
(STERILE DRAINAGE CATHETERS AND ACCESSORY DEVICES FOR SINGLE USE. (EUROPEAN STANDARD EN 1617).) |
| NF S93-042-1997 |
除管内导管外的其它导管.通用特质的试验方法(欧洲标准EN 1618) |
(CATHETERS OTHER THAN INTRAVASCULAR CATHETERS. TEST METHODS FOR COMMON PROPERTIES. (EUROPEAN STANDARD EN 1618).) |
| NF S93-043-2003 |
导管.单腔导管和医用管扭结的试验方法 |
(Catheters - Test methods for kinking of single lumen catheters and medical tubing.) |
| NF S93-051-1999 |
一次性无菌直肠导管 |
(STERILE RECTAL CATHETERS FOR SINGLE USE. (EUROPEAN STANDARD EN 12439).) |
| NF S93-061-2001 |
一次性肠饲喂导管、喂食器及其连接器.设计和试验 |
(Enteral feeding catheters and enteral giving sets for single use and their connectors - Design and testing.) |
| NF S93-071-1997 |
一次性使用的无菌尿道导管 |
(Sterile urethral catheters for single use.) |
| NF S93-071/A1-1999 |
一次性使用无菌膀胱导管 |
() |
| NF S93-0711-1999 |
NF S93-071-97的补充件1 |
() |
| NF S93-102-1997 |
含水非肠道药配制剂用弹性件 |
(Elastomeric parts for aqueous parenteral preparations.) |
| NF S93-102/A1-1999 |
含水非肠道药配制用弹性部件 |
(Elastomeric parts for aqueous parenteral preparations.) |
| NF S93-103-2003 |
输血、输液和注射瓶用铝盖.一般要求和试验方法 |
(Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods.) |
| NF S93-105-1993 |
输液瓶和注射管用铝-塑合成盖.要求及试验方法 |
(Caps made of aluminium-plastics combinations for infusion bottles and injections vials. Requirements and test methods.) |
| NF S93-109-1992 |
医用、输液、灌注和注射设备.容量为8.15.20的冻干玻璃瓶 |
(Transfusion, infusion and injection equipement for medical use. Freeze drying glass vials of 8, 15, 20 capacities.) |
| NF S93-110-1993 |
注射容器及附件.第1部分:玻璃管注射瓶 |
(Injection containers for injectables and accessories. Part 1 : injection vials made of glass tubing.) |
| NF S93-111-1993 |
注射容器及附件.第2部分:注射瓶的封口 |
(Injection containers for injectables and accessories. Part 2 : closures for injection vials.) |
| NF S93-112-1993 |
注射容器及附件.第3部分:注射瓶铝盖 |
(Injection containers for injectables and accessories. Part 3 : aluminium caps for injection vials.) |
| NF S93-112-3-2003 |
注射液容器及附件.第3部分:注射小瓶用的铝盖 |
(Injection containers and accessories - Part 3 : aluminium caps for injection vials.) |
| NF S93-113-1993 |
注射容器及附件.第4部分:模压玻璃注射瓶 |
(Injection containers for injectables and accessories. Part 4 : injection vials made of moulded glass.) |
| NF S93-115-1993 |
注射容器及附件.第6部分:注射瓶用铝-塑料瓶盖 |
(Injection contrainers for injectable and accessories. Part 6 : caps made of aluminium-plastics combinations for injection vials.) |
| NF S93-122-1993 |
医用输液设备.第3部分:输液用铝盖 |
(INFUSION EQUIPMENT FOR MEDICAL USE. PART 3 : ALUMINIUM CAPS FOR INFUSION BOTTLES.) |
| NF S93-123-1-2003 |
医用输液设备.第2部分:输液瓶塞 |
(Infusion equipment for medical use - Part 2 : closures for infusion bottles.) |
| NF S93-123-2-2003 |
医用输液设备.第2部分:输液瓶塞 |
(Infusion equipment for medical use - Part 2 : closures for infusion bottles.) |
| NF S93-124-1993 |
医用输液设备.第5部分:输液用滴定管型号 |
(INFUSION EQUIPMENT FOR MEDICAL USE. PART 5 : BURETTE TYPE INFUSION SETS.) |
| NF S93-126-1993 |
医用输液设备.第7部分:铝-塑料合成制输液瓶盖 |
(Infusion equipment for medical use. Part 7 : caps made of aluminium-plastics combinations for infusion bottles.) |
| NF S93-130-1-2003 |
医用注射器具.第1部分:注射安瓿 |
(Injection equipment for medical use - Part 1 : ampoules for injectables.) |
| NF S93-130-1999 |
医用注射设备.第1部分:注射品用安瓿 |
(Injection equipment for medical use - Part 1 : ampoules for injectables.) |
| NF S93-131-1999 |
医用注射设备.第2部分:一点切(OPC)针剂 |
(Injection equipment for medical use - Part 2 : One-point-cut (OPC) ampoules.) |
| NF S93-301-2003 |
血液透析和有关疗法用浓缩物 |
(Concentrates for haemodialysis and related therapies.) |
| NF S93-302-1996 |
血渗析,血过滤,血浓度及其体外循环 |
(Haemodialysers, haemodiafilters, haemofilters, haemoconcentrators and their extracorporeal circuits.) |
| NF S93-306-1992 |
体外循环.一次性使用的无菌血浆过滤分离器.(一次性使用的无菌血浆过滤器) |
(Extracorporeal circuits. Sterile, single-use units for filtration plasma separators (single-use, sterile plasmafilters).) |
| NF S94-001-1998 |
非活动外科植入物的一般要求 |
(Non-active surgical implants. General requirements.) |
| NF S94-002-1998 |
用于有关非活性外科植入物的工具 |
(Instrumentation to be used in association with non-active surgical implants. General requirements.) |
| NF S94-051-2000 |
外科植入物.金属材料.锻造不锈钢 |
(Implants for surgery - Metallic materials - Wrought stainless steel.) |
| NF S94-052-1997 |
外科用植入物.金属材料.第2部分:非金属钛 |
(Implants for surgery. Metallic materials. Part 2 : unalloyed titanium.) |
| NF S94-053-1997 |
外科植入物.金属材料.第12部分:锻造钴/铬/钼合金 |
(Implants for surgery. Metallic materials. Part 12 : wrought cobalt-chromium-molybdenum alloy.) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com