标准号 |
中文名称 |
英文名称 |
NF C20-707-1994 |
基本环境试验.第2部分:试验方法.GA试验指南:加速度,静止状态 |
(Basic environmental testing procedures. Part 2 : tests. Test Ga and guidance : acceleration, steady state.) |
NF C20-709-2000 |
环境试验.第2部分:试验.太阳辐射试验指南 |
(Environmental testing - Part 2 : tests - Guidance for solar radiation testing.) |
NF C20-710-1989 |
环境试验.试验方法.J试验和导则:霉菌生长 |
(Environmental testing. Test methods. Test J and guidance : mould growth.) |
NF C20-711-1999 |
基本环境试验.第2部分:试验方法.KA试验:盐雾 |
(Environmental testing. Part 2 : tests. Test Ka : salt mist.) |
NF C20-713-1999 |
基本环境试验.第2部分:试验方法.m试验:低气压 |
(Environmental testing. Part 2 : tests. Test M : low air pressure.) |
NF C20-714-2000 |
环境试验.第2部分:试验.试验N:温度变化 |
(Environmental testing - Part 2 : tests - Test N : change of temperature.) |
NF C20-717-1995 |
环境试验.第2部分:试验.试验Q:密封 |
(Environmental testing. Part 2 : tests. Test Q : sealing.) |
NF C20-718-2001 |
环境试验.第2-18部分:试验.试验R和指南:水 |
(Environmental testing - Part 2-18 : tests - Test R and guidance : water.) |
NF C20-720-1987 |
基本环境试验程序.试验方法.试验T:锡焊 |
(Basic environmental testing procedures. Test methods. Test T : soldering.) |
NF C20-720/A1-1988 |
NF C 20-720-1987的补充1 |
() |
NF C20-7201-1988 |
气候的基本试验和机械坚固性的基本试验.试验方法.T试验:可焊性 |
() |
NF C20-721-2001 |
环境试验.第2-21部分:试验.试验U:接线端子和整体安装装置的牢固性 |
(Environmental testing - Part 2-21 : tests - Test U : robustness of terminations and integral mounting devices.) |
NF C20-7212-1998 |
环境试验.第2部分;试验方法.U 试验.终端和集成组装器件的耐用性.第2次补充 |
() |
NF C20-7213-1998 |
环境试验.第2部分;试验方法.U 试验.终端和集成组装器件的耐用性.第3次补充 |
() |
NF C20-727-1994 |
基本环境测试.第2部分:试验.EA试验指南:冲击 |
(Basic environmental testing procedures. Part 2 : tests. Test Ea and guidance : shock.) |
NF C20-729-1994 |
基本环境试验方法.第2部分:试验.试验EB指南:震动 |
(Basic environmental testing procedures. Part 2 : tests. Test Eb and guidance : bump.) |
NF C20-730-1999 |
环境试验.第2部分:试验.试验DB和指南:循环湿热试验(12加12小时循环) |
(Environmental testing. Part 2 : tests. Test Db and guidance : damp heat, cyclic (12 plus 12 hour cycle).) |
NF C20-731-1994 |
基本环境测试第2部分:试验方法.EC试验和指南摔倒.材料上第一落点的试验 |
(Basic environmental testing procedures. Part 2 : tests. Test Ec : drop and topple, primarily for equipment-type specimens.) |
NF C20-732-1994 |
基本环境试验规程.第2部分:试验.第32节:试验Ed:自由跌落 |
(Basic environmental testing procedures. Part 2 : tests. Test Ed : free fall.) |
NF C20-733-2000 |
环境试验.第2部分:试验.温度变化试验指南 |
(Environmental testing - Part 2 : tests - Guidance on change of temperature tests.) |
NF C20-734-1987 |
气侯的基本试验和机械坚固性的基本试验.试验方法.Fd试验.在宽带上的随机振动.一般要求 |
(Basic environmental testing procedures. Test methods. Test Fd : random vibration wide band. General requirements.) |
NF C20-735-1987 |
气侯的基本试验和机械坚固性的基本试验.试验方法.Fda 试验.在宽带上的随机振动.重复性高 |
(Basic environmental testing procedures. Test methods. Test Fda : randim vibration wide band. Reproducibility.) |
NF C20-736-1987 |
气侯的基本试验和机械坚固性的基本试验.试验方法.Fdb 试验.在宽带上的随机振动.中等重复性 |
(Basic environmental testing procedures. Test methods. Test Fdb : random vibration wide band. Reproducibility medium.) |
NF C20-737-1987 |
气侯的基本试验和机械坚固性的基本试验.试验方法.Fdc 试验.在宽带上的随机振动.重复性低 |
(Basic environmental testing procedures. Test methods. Test Fdc : random vibration wide band. Reproductibility low.) |
NF C20-738-1999 |
环境测试.第2部分:试验.试验 Z/AD:混合温度/湿度循环试验 |
(Environmental testing. Part 2 : tests. Test Z/AD : composite temperature/humidity cyclic test.) |
NF C20-739-1999 |
环境试验.第2部分:试验.试验Z/AMD:结合连续寒冷、低气压和湿热的试验 |
(Environmental testing. Part 2 : tests. Test Z/AMD : combined sequential cold, low air pressure and damp heat test.) |
NF C20-740-2000 |
环境试验.第2部分:试验.试验Z/AM:冷/低气压结合试验 |
(Environmental testing - Part 2 : tests - Test Z/AM : combined cold/low air pressure tests.) |
NF C20-741-2000 |
环境试验.第2部分:试验.试验Z/BM:干热/低气压组合试验 |
(Environmental testing - Part 2 : tests - Test Z/BM : combined dry heat/low air pressure tests.) |
NF C20-744-1995 |
环境试验.第2部分:试验.试验T指南:焊料 |
(Environmental testing. Part 2 : tests. Guidance on test T : soldering.) |
NF C20-745-1993 |
环境试验.第2部分:试验.Xa试验和导则:清洁溶剂浸设试验 |
(Environmental testing. Part 2 : tests. Test Xa and guidance : immersion in cleaning solvents.) |
NF C20-745/A1-1994 |
环境试验.第2部分:试验. Xa和指南:在清洁溶剂中浸没 |
(Environmental testing. Part 2 : tests. Test Xa and guidance : immersion in cleaning solvents.) |
NF C20-7451-1994 |
IEC出版物68-2-45的修改件:试验XA和导则.浸没和洗涤溶剂 |
() |
NF C20-747-2000 |
环境试验.第2-47部分:试验方法.件、设备以及其他振动、冲击和及类似动力试验用的物品的安装 |
(Environmental testing - Part 2-47 : test methods - Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests.) |
NF C20-748-2000 |
环境试验.第2部分:试验.应用IEC 60068的试验来模拟贮存影响的指南 |
(Environmental testing - Part 2 : tests - Guidance on the application of the test of IEC 60068 to simulate the effects of storage.) |
NF C20-750-2000 |
环境试验.第2部分:试验.试验 Z/AFc:散热和非散热试样的低温/振动(正弦)组合试验 |
(Environmental testing - Part 2 : tests - Tests Z/AFc : combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens.) |
NF C20-751-2000 |
环境试验.第2部分:试验 Z/BFc:热扩散样品和非热扩散样品的干热/振动(正弦)试验 |
(Environmental testing - Part 2 : tests - Tests Z/BFc : combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens.) |
NF C20-752-1996 |
环境试验.第2部分:试验.试验KB:盐雾循环(氯化钠溶液) |
(environmental testing. Part 2 : tests. Test Kb : salt mist, cyclic (sodium chloride solution).) |
NF C20-755-1994 |
基本环境试验规程.第2部分:试验.第55节:试验Ee及导则:颤动 |
(Basic environmental testing procedures. Part 2 : tests. Test Ee and guidance bounce.) |
NF C20-757-2001 |
环境试验.第2-57部分:试验.试验Ff:振动.时间关系法 |
(Environmental testing - Part 2-57 : tests - Test Ff : vibration - Time-history method.) |
NF C20-758-1990 |
环境试验.试验方法.TD试验可钎焊性敷镀金属抗溶性和表面件抗焊接热强度测定 |
(Environmental testing. Test methods. Test Td : solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (smd).) |
NF C20-759-1994 |
环境试验.第2部分:试验方法;第59节:试验Fe:振动;正弦跳动法 |
(Environmental testing. Part 2 : test methods. Test Fe : vibration sine beat method.) |
NF C20-760-1996 |
环境试验.第2部分:试验.试验Ke:流动混合气体的腐蚀试验 |
(Environmental testing. Part 2 : tests. Test Ke : flowing mixed gas corrosion test.) |
NF C20-761-1994 |
环境试验.第2部分:试验方法.试验Z/ABDM:气候顺序图 |
(Environmental testing. Part 2 : test methods. Test Z/ABDM : climatic sequence.) |
NF C20-764-1995 |
环境试验.第2部分:试验方法.试验Fh:宽频带随机振动和指南 |
(Environmental testing. Part 2 : test methods. Test Fh : vibration, broad band random (digital control) and guidance.) |
NF C20-765-1998 |
环境试验.第2部分:试验方法.试验Fg:声音诱发振动 |
(Environmental testing. Part 2 : methods of test. Test Fg : vibration, acoustically induced.) |
NF C20-766-1995 |
环境试验.第二部分:试验方法.温热条件下的稳定性 |
(Environmental testing. Part 2 : test methods. Test Cx : damp heat, steady state (unsatured pressurized vapour).) |
NF C20-767-1998 |
环境试验.第2部分:试验.试验CY:主要用于部件的恒定湿热加速试验(欧洲标准EN 60 068-2-67) |
(Environmental testing. Part 2 : tests. Test Cy : damp heat, steady state, accelerated test primarily intended for components.) |
NF C20-768-1998 |
环境试验.第2部分:试验.试验L:灰尘和沙 |
(Environmental testing. Part 2 : tests. Test L : dust and sand.) |
NF C20-769-1998 |
环境试验.第2部分:试验.试验Te:加湿平衡法对表面安装技术用电子件进行可焊性试验 |
(Environmental testing. Part 2 : tests. Test Te : solderability testing of electronic components for surface mount technology by the wetting balance method.) |
NF C20-770-1996 |
环境试验.第2部分:试验.试验XB:手和手指磨擦引起的符号及文字的磨蚀 |
(Environmental testing. Part 2 :tests. Test Xb : abrasion of markings and letterings caused by rubbing of fingers and hands.) |
NF C20-774-2000 |
环境试验.第2部分:试验.试验Xa:流体污染 |
(Environmental testing - Part 2 : tests - Test Xc : fluid contamination.) |
NF C20-775-1998 |
环境试验.第2部分:试验.试验Eh:锤击试验 |
(Environmental testing. Part 2 : tests. Test Eh : hammer tests.) |
NF C20-777-2001 |
环境试验.第2-77部分:试验.试验77:整体强度和冲击 |
(Environmental testing - Pat 2-77 : tests - Test 77 : body strength and impact shock.) |
NF C20-778-2002 |
环境测试.第2-78部分: 试验-试验 Cab: 湿热和稳态 |
(Environmental testing - Part 2-78 : tests - Test Cab : damp heat, steady state.) |
NF C20-790-2-1-2003 |
静电学.第2-1部分:材料和产品损耗静电荷的能力的测量方法 |
(Electrostatics - Part 2-1 : measurement methods - Ability of materials and products to dissipate static electric charge.) |
NF C20-790-2-3-2001 |
静电.第2-3部分:对用于防止静电积累的固体平面材料耐性测定的试验方法. |
(Electrostatics - Part 2-3 : methods of test for determining the resistance and reisistivity of solid planar materials used to avoid electrostatic charge accumulation.) |
NF C20-790-4-1-1997 |
静电.第4部分;专用标准测试方法.第1节:地板铺面和已安装地板的静电性能 |
(Electrostatics. Part 4 : standard test methods for specific applications. Section 1 : electrostatic behaviour of floor coverings and installed floors.) |
NF C20-790-4-3-2002 |
静电学.第4-3部分:特殊应用的标准试验方法.鞋类 |
(Electrostatics - Part 4-3 : standard test methods for specific applications - Footwear.) |
NF C20-790-5-1-2001 |
静电学.第5-1部分:有静电现象的电子设备的保护.一般要求 |
(Electrostatics - Part 5-1 : protection of electronic devices from electrostatic phenomena - General requirements.) |
NF C20-790-5-2-2001 |
静电学.第5-2部分:有静电现象的电子设备的保护.用户指南 |
(Electrostatics - Part 5-2 : Protection of electronic devices from electrostatic phenomena - User guide.) |
NF C20-907-2000 |
固体非金属材料暴露于引燃源的可燃性.试验方法清单 |
(Flammability of solid non metallic materials when exposed to flame sources - List of test methods.) |
NF C20-911-1-30-2003 |
着火危险试验.第1-30部分:电工产品着火危险评定指南.预选试验规程的使用 |
(Fire hazard testing - Part 1-30 : guidance for assessing the fire hazard of electrotechnical products - Use of preselection testing procedures.) |
NF C20-911-10-2000 |
着火危险试验.第11-10部分:试验火焰.50W水平和垂直火焰试验法 |
(Fire hazard testing - Part 11-10 : test flames - 50 W horizontal and vertical flame test methods.) |
NF C20-911-20-2000 |
着火危险试验.第11-20部分:试验火焰.500W火焰试验法 |
(Fire hazard testing - Part 11-20 : test flames - 500 W flame test methods.) |
NF C20-911-2000 |
防火试验.第1-1部分:评定电工产品防火性的指南.一般导则 |
(Fire hazard testing - Part 1-1 : guidance for assessing the fire hazard of electrotechnical products - General guidelines.) |
NF C20-921-0-1997 |
火险试验.第2部分:试验方法.第1节/0活页:炽热丝试验方法.总则(欧洲标准EN 60 695-2-1-0) |
(FIRE HAZARD TESTING. PART 2 : TEST METHODS. SECTION 1/SHEET 0 : GLOW-WIRE TEST METHODS. GENERAL. (EUROPEAN STANDARD EN 60 695-2-1-0).) |
NF C20-922-1994 |
火险试验.第2部分:试验方法.第2节:针型火焰燃烧试验 |
(Fire hazard testing. Part 2 : test methods. Section 2 : needle-flame test.) |
NF C20-924-0-1994 |
火灾试验.第2部分:试验方法.第4节:活页0:扩散型和混合型火焰试验法 |
(Fire hazard testing. Part 2 : test methods. Section 4 : sheet 0 : diffusion type and premixed type flame test methods.) |
NF C20-924-1-1994 |
火灾试验.第2部分:试验方法.第4节:活页1:1kw标准混合型火焰试验和指南 |
(Fire hazard testing. Part 2 : test methods. Section 4 : sheet 1 : 1 kw nominal pre-mixed test flame and guidance.) |
NF C20-924-10-3-2002 |
着火危险试验.第10-3部分:异常热度.模应力降低变形试验 |
(Fire hazard testing - Part 10-3 : abnormal heat - Mould stress relief distortion test.) |
NF C20-924-2-10-2001 |
火灾危害试验.第2-10部分:基于辉光灯丝的试验方法.辉光装置和通用试验程序 |
(Fire hazard testing - Part 2-10 : glowing/out-wire based test method - Glow-wire apparatus and common test procedure.) |
NF C20-924-2-11-2001 |
火灾危险试验.第2-11部分:热线试验方法.最终产品的热线易燃性试验方法 |
(Fire hazard testing - Part 2-11 : glowing/hot-wire based test methods - Glow-wire flammability test method for end-products.) |
NF C20-924-2-12-2001 |
火灾危险试验.第2-12部分:热线试验方法.材料的热线易燃性试验方法 |
(Fire hazard testing - Part 2-12 : glowing/hot-wire based test methods - Glow-wire flammability test method for materials.) |
NF C20-924-2-13-2001 |
火焰危害试验.第2-13部分:发光/热焰试验方法.材料的热焰点火试验 |
(Fire hazard testing - Part 2-13 : glowing/hot-wire based test methods - Glow-wire ignitability test method for materials.) |
NF C20-924-5-1-2003 |
着火危险试验.第5-1部分:燃烧废气产生的腐蚀破坏作用.一般指南 |
(Fire hazard testing - Part 5-1 : corrosion damage effects of fire effluent - General guidance.) |
NF C20-924-6-1-2002 |
着火危险试验.第6-1部分:烟阻光度.一般指南 |
(Fire hazard testing - Part 6-1 : smoke opacity - General guidance.) |
NF C20-940-1990 |
着火危险试验.第4部分:火灾试验术语 |
(Fire hazard testing. Part 4 : terminology concerning fire tests.) |
NF C20-951-1994 |
着火危险试验.第5部分:灭火液体腐蚀损坏的评定.第1节:总则 |
(Fire hazard testing. Part 5 : assessment of potential corrosion damage by fire effluent. Section 1 : general guidance.) |
NF C20-971-2000 |
着火危险试验.第7部分:将火中电工产品产生的毒性危害降至最小的指南.第1节:总则 |
(Fire hazard testing - Part 7 : guidance on the minimization of toxic hazards due to fires involving electrotechnical products - Section 1 : General.) |
NF C20-981-2001 |
火灾试验.第8-1部分:热的释放.一般指南 |
(Fire hazard testing - Part 8-1 : heat release - General guidance.) |
NF C20-991-2000 |
着火危险试验.第9-1部分:火焰的表面扩展.通用指南 |
(Fire hazard testing - Part 9-1 : surface spread of flame - General guidance.) |
NF C23-241-2-2-2001 |
易燃粉尘场地中使用的电气设备.第2部分:试验方法.第2节:粉尘层中电阻系数的测定方法 |
(Electrical appartus for use in the presence of combustible dust - Part 2 : test methods - Section 2 : method for determining the electrical resistivity of dust in layers.) |
NF C23-503-2000 |
在空气受到沼气和煤尘的侵害下I组M1类设备保持的功能 |
(Group I, category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust.) |
NF C23-514-1999 |
潜在爆炸环境用电气设备.总要求 |
(ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES. GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 50 014).) |
NF C23-515-1999 |
潜在爆炸环境用电气设备.油浸“O“ |
(Electrical apparatus for potentially explosive atmospheres. Oil immersion “o“.) |
NF C23-516-1998 |
防爆电气设备.压力装置P |
(Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus “p“.) |
NF C23-517-1999 |
潜在爆炸环境用电气设备.粉末填充“q“ |
(Electrical apparatus for potentially explosive atmospheres. Powder filling “q“.) |
NF C23-518-1996 |
防爆电气设备.防爆外壳“D“ |
(Electrical apparatus for potentially explosive atmospheres. Flameproof enclosures “D“.) |
NF C23-5182-1983 |
C 23-518-82的补充2 |
() |
NF C23-5183-1986 |
补充3 |
() |
NF C23-5193-1986 |
补充3 |
() |
NF C23-520-1995 |
防爆电气设备.内在安全“I“ |
(Electrical apparatus for potentially explosive atmospheres. Intrinsic safety “i“.) |
NF C23-5202-1986 |
NF C23-520-82的补充2 |
() |
NF C23-521-2000 |
潜在爆炸性气体环境用电器.“n“型防护装置 |
(Electrical apparatus for potentially explosive atmospheres - Type of protection “n“.) |
NF C23-528-1987 |
防爆电气设备.易燃材料静电喷涂设备的选择.安装和使用的要求.第1部分:手持式静电喷涂枪 |
(ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES. ENCAPSULATION “M“. (EUROPEAN STANDARD EN 50 028).) |
NF C23-533-1-2002 |
对沼气敏感的矿工用头灯.第1部分.总要求.爆炸风险的推定和检验 |
(Caplights for use in mines susceptible to firedamp - Part 1 : general requirements - Construction and testing in relation to the risk of explosion.) |
NF C23-533-2-2002 |
对沼气敏感的矿井用矿灯.第2部分:性能和安全相关问题 |
(Caplights for use in mines susceptible to firedamp - Part 2 : performance and other safety-related matters.) |
NF C23-539-1981 |
防爆电气设备.内部安全“i” 的电气系统(欧州标准EN50 039) |
(ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES. INTRINSICALLY SAFE ELECTRICAL SYSTEMS “I“. (EUROPEAN STANDARD EN 50 039).) |
NF C23-544-2000 |
家用易燃气体监测用电器设备.选择、安装、使用和维修指南 |
(Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance.) |
NF C23-548-2002 |
不易燃液体喷涂材料用自动静电喷涂设备 |
(Automatic electrostatic spraying equipment for non-flammable liquid spraying material.) |
NF C23-550-2002 |
潜在易爆环境中用的电气装置.手持式静电喷涂设备 |
(Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment.) |
NF C23-553-1-1987 |
可燃物品用静电喷涂设备的使用.安置及选择规则.第1部分:极限能量为0.24MJ.并带辅助装置的涂料手持式静电喷 |
() |
NF C23-553-2-1992 |
可燃物用静电喷射设备的选择、安装和使用的要求.第2部分:极限能量为5MJ的手持静电粉末喷射枪及辅助设备 |
() |
NF C23-553-3-1992 |
可燃物品用静电喷涂设备的选择、安装和使用要求.第3部分:极限能量为0.24MJ或5MJ的手持静电绒絮喷射枪及辅助 |
() |
NF C23-554-1992 |
可燃性气体的检测和测量电器仪表.一般要求和试验方法 |
(Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods.) |
NF C23-554/A1-1998 |
探测用电器和测量可燃气体.一般要求和检验方法.NF EN 50 054-1992的修改件1 |
() |
NF C23-5541-1998 |
1992年NF C 23-554 补充件1 |
() |
NF C23-555-1992 |
可燃性气体的检测和测量电气仪表.测量空气中沼气含量不超过5%的I组电气仪表的性能要求 |
(Electical apparatus for the detection and measurement of combustible gases. Performance requirements for group I apparatus indicating up to 5 per cent (V/V) methane in air.) |
NF C23-555/A1-1998 |
NF EN 50055-1992的修改件1 |
() |
NF C23-5551-1998 |
1992年NF C 23-555的补充件1 |
() |
NF C23-556-1992 |
可燃性气体检测和测量电气仪表.测量空气中沼气含量为100%及其以下的I组电气仪表的性能要求 |
(Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group I apparatus indicating up to 100 per cent (V/V) methane in air.) |
NF C23-556/A1-1998 |
NF EN 50056-1992的修改件1 |
() |
NF C23-5561-1998 |
1992年NF C 23-556的补充件1 |
() |
NF C23-557-1992 |
可燃性气体的检测和测量电气仪表.测量低于爆炸极限100%以下的Ⅱ组电气仪表的性能要求 |
(Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent lower explosive limit.) |
NF C23-558-1992 |
可燃性气体检测和测量电气仪表.测量瓦斯为100%及其以下的Ⅱ组电气仪表的性能要求 |
(Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent (V/V) gas.) |
NF C23-559-1993 |
油漆用不易燃材料静电手持喷涂设备规范 |
(Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing.) |
NF C23-564-2002 |
氧气检测和测量用电气装置.性能要求和试验方法 |
(Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods.) |
NF C23-570-2000 |
电磁兼容性.可燃气体、有毒气体或氧气的检测和测量用电气设备 |
(Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.) |
NF C23-571-2002 |
检测和测量可燃气体、有毒气体和氧气的电气设备.使用软件和/或数字技术的设备的要求和试验 |
(Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies.) |
NF C23-576-1998 |
易燃液体喷雾材料用自动静电喷雾装置 |
(AUTOMATIC ELECTROSTATIC SPRAYING INSTALLATIONS FOR FLAMMABLE LIQUID SPRAYING MATERIAL. (EUROPEAN STANDARD EN 50 176).) |