标准号 |
中文名称 |
英文名称 |
| NF E66-077-1975 |
攻丝导孔圆柱柄分级钻 |
(SUBLAND TWIST DRILLS WITH PARALLEL SHANKS FOR HOLES PRIOR TO TAPPING SCREW THREADS.) |
| NF E66-078-1975 |
攻丝导孔莫氏锥柄分级钻 |
(SUBLAND TWIST DRILLS WITH MORSE TAPER SHANKS FOR HOLES PRIOR TO TAPPING SCREW THREADS.) |
| NF E66-080-1980 |
建筑物用带硬金属钻头的钻.冲击钻头式钻机.特性 |
(MASONRY DRILLS,WITH HARD METAL TIPS. HAMMER DRILLS. CHARACTERISTICS.) |
| NF E66-081-1984 |
建筑物用钻机.旋转冲击钻机的连接锥体.尺寸 |
(MASONRY DRILLS. TAPERS OF HAMMER DRILLS.) |
| NF E66-101-2002 |
G系列和Rp系列管螺纹用的螺纹丝锥.螺纹部分的公差 |
(Ground thread taps for pipe threads G series and Rp series - Tolerances on the threaded portion.) |
| NF E66-103-1993 |
机用螺丝锥和手动螺丝锥 |
(Short machine taps and hand taps.) |
| NF E66-107-2000 |
公称直径由M3-M10的长杆螺丝攻.由回缩的全直径杆型螺丝攻 |
(Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess.) |
| NF E66-108-2000 |
公称直径由M3-M24和1/8-1 英寸的长杆螺丝攻.渐减型螺丝攻 |
(Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps.) |
| NF E66-120-1975 |
圆柱和锥形管螺纹手用螺丝锥 |
(HAND TAPS FOR PIPE THREADS FOR PARALLEL AND TAPER THREADS.) |
| NF E66-130-1983 |
可调的丝锥板手（丝锥架） |
(ADJUSTABLE TAP WRENCHES (TAP HOLDERS).) |
| NF E66-150-1990 |
ＩＳＯ公制螺纹的手用和机用圆螺丝板牙 |
(Hand- An machine-operated circular screwing dies and hand-operated die stocks.) |
| NF E66-153-1990 |
煤气管道圆柱螺纹手用和机用圆螺丝板牙 |
(Hand-and machine-operated circular screwing dies for parallel pipe threads. G series.) |
| NF E66-154-1990 |
煤气管道锥形螺纹手用和机用圆螺纹板牙 |
(Hand- and machine-operated circular screwing dies for taper pipe threads. R series.) |
| NF E66-156-1985 |
手用六角圆板牙.尺寸 |
(Hexagonal dienuts. Dimensions.) |
| NF E66-199-1996 |
铣刀.命名法 |
(Milling cutters. Nomenclature.) |
| NF E66-200-2-2000 |
铣刀筒形手柄.第2部分:扁筒形手柄尺寸特性 |
(Cylindrical shanks for milling cutters - Part 2 : dimensional characteristics of flatted cylindrical shanks.) |
| NF E66-204-1984 |
杆传动金属铣刀.与铣刀杆主轴的互换性尺寸 |
(Milling cutters with tenon drive. Interchangeability dimensions with cutter mandrels.) |
| NF E66-205-1981 |
金属铣刀.特性 |
(MILLING CUTTERS. CHARACTERISTICIS.) |
| NF E66-208-1977 |
圆柱柄锥形阴模铣刀 |
(TAPERED DIE-SINKING CUTTERS WITH PARALLEL SHANKS.) |
| NF E66-208-2003 |
直柄锥形凹模铣刀 |
(Tapered die-sinking cutters with parallel shanks.) |
| NF E66-209-1977 |
７／２４锥形柄两面刃圆柱形铣刀.标准系列和长系列 |
(END MILLS 7/24 TAPER SHANKS. STANDARD SERIES AND LONG SERIES.) |
| NF E66-210-1977 |
７／２４锥形柄开槽铣刀.短系列和标准系列 |
(SLOT DRILLS WITH 7/24 TAPER SHANKS. STANDARD SERIES AND LONG SERIES.) |
| NF E66-211-1977 |
圆柱柄两面刃圆柱形铣刀.标准系列和长系列 |
(END MILLS WITH PARALLEL SHANKS. STANDARD SERIES AND LONG SERIES.) |
| NF E66-212-1977 |
莫氏锥柄两面刃圆柱形铣刀.标准系列和长系列 |
(END MILLS WITH MORSE TAPER SHANK. STANDARD SERIES AND LONG SERIES.) |
| NF E66-213-1972 |
螺纹孔后定中心两面刃圆柱形铣刀 |
(SHELL END MILLS WITH THREADED BORE AND BACK CENTRING.) |
| NF E66-214-1984 |
杆传动两面刃圆柱形铣刀 |
(Shell end mills with tenon drive.) |
| NF E66-215-1-2003 |
端铣刀和槽铣刀.第1部分:直柄铣刀 |
(End mills and slot drills - Part 1: milling cutters with cylindrical shanks.) |
| NF E66-215-2-2003 |
端铣刀和槽铣刀.第2部分:莫氏锥柄铣刀 |
(End mills and slot drills - Part 2 : milling cutters with Morse taper shanks.) |
| NF E66-215-3-2003 |
端铣刀和槽铣刀.第3部分:7/24锥柄铣刀 |
(End mills and slot drills - Part 3 : milling cutters with 7/24 taper shanks.) |
| NF E66-216-2002 |
键传动铣刀.有恒定外形的成形铣刀 |
(Bore cutters with key drive - Form milling cutters with constant profile.) |
| NF E66-217-1977 |
圆柱柄开槽铣刀.短系列和标准系列 |
(SLOT DRILL WITH PARALLEL SHANKS. SHORT SERIES AND STANDARD SERIES.) |
| NF E66-218-1977 |
莫氏锥柄开槽铣刀.短系列和标准系列 |
(SLOT DRILLS WITH MORSE TAPER SHANK. SHORT SERIES AND STANDARD SERIES.) |
| NF E66-225-1972 |
栓传动单面刃开槽铣刀 |
(SLOTTING CUTTERS WITH KEY DRIVE.) |
| NF E66-226-1966 |
键传动平面铣刀 |
(FACING CUTTERS WITH KEY DRIVE.) |
| NF E66-227-1968 |
螺纹孔后定中心４５°和６０°两面刃锥形铣刀 |
(SINGLE ANGLE CUTTERS (45 DEGREES AND 60 DEGREES) WITH THREADED BORE AND BACK CENTRING.) |
| NF E66-228-1977 |
圆柱柄Ｔ形槽铣刀 |
(T SLOT CUTTERS WITH PARALLEL SHANKS.) |
| NF E66-229-1975 |
莫氏锥柄Ｔ形槽铣刀 |
(T SLOT CUTTERS WITH MORSE TAPER SHANKS.) |
| NF E66-233-1975 |
粗细齿圈铣刀 |
(METAL SLITTING SAWS WITH FINE AND COARSE TEETH.) |
| NF E66-235-1966 |
链传动.切削齿轮的圆盘铣刀断面 |
(CHAIN TRANSMISSIONS. PROFILE OF CHAIN WHEEL MODUAL CUTTERS.) |
| NF E66-236-1966 |
链传动.切削齿轮的滚刀断面 |
(CHAIN TRANSMISSIONS. PROFILE OF CHAIN WHEEL HOBS.) |
| NF E66-237-1984 |
杆传动表面加工钟形架铣刀 |
(Bell-shaped face cutters with tenon drive.) |
| NF E66-239-1975 |
７／２４锥形柄活动齿圆柱铣刀 |
(INSERTED TOOTH CUTTERS WITH 7/24 TAPER SHANK.) |
| NF E66-240-1984 |
杆传动活动齿圆柱铣刀 |
(Inserted tooth cutters with tenon drive.) |
| NF E66-241-1979 |
７／２４主轴前部圆柱铣刀.活动齿铣刀 |
(Milling cutters mounted on centring arbors having a 7/24 taper. Inserted tooth cutters.) |
| NF E66-242-1977 |
栓传动等腰铣刀 |
(DOUBLE EQUAL ANGLE CUTTERS WITH KEY DRIVE.) |
| NF E66-243-1966 |
栓传动双面锥形铣刀 |
(SINGLE ANGLE CUTTERS WITH KEY DRIVE.) |
| NF E66-244-1975 |
栓传动直齿圈三面刃铣刀 |
(SIDE AND FACE CUTTERS WITH STRAIGHT TEETH WITH KEY DRIVE.) |
| NF E66-245-1975 |
栓传动变换齿圈三面刃铣刀 |
(SIDE AND FACE CUTTERS WITH STAGGERED TOOTH WITH KEY DRIVE.) |
| NF E66-247-1968 |
后定中心螺纹孔变换齿圈套筒式三面刃铣刀 |
(SIDE AND FACE CUTTERS WITH ALTERNATE TEETH,WITH THREADED BORE AND BACK CENTRING.) |
| NF E66-248-1979 |
７／２４主轴前部圆柱铣刀.固定互换性尺寸 |
(Milling cutters mounted on centring arbors having a 7/24 taper. Fitting dimensions.) |
| NF E66-249-1974 |
顶角６０°,９０°和１２０°莫氏锥柄倒角铣刀 |
(MORSE TAPER SHANK COUNTERSINKS FOR ANGLES 60, 90 AND 120 INCLUSIVE.) |
| NF E66-250-1974 |
顶角６０°,９０°和１２０°圆柱柄倒角铣刀 |
(PARALLEL SHANK COUNTERSINKS FOR ANGLES 60, 90 AND 120 INCLUSIVE.) |
| NF E66-252-1-1996 |
有转位刀片的立铣刀.第1部分:扁平直柄立铣刀 |
(End mills with indexable inserts. Part 1 : end mills with flatted parallel shank.) |
| NF E66-252-2-1996 |
有转位刀片的立铣刀.第2部分:莫氏锥柄立铣刀 |
(End mills with indexable inserts. Part 2 : end mills with morse taper shank.) |
| NF E66-253-1996 |
有转位刀片的面铣刀.尺寸 |
(Face milling cutters with indexable inserts. Dimensions.) |
| NF E66-255-1982 |
硬金属活动刀片铣刀.三面刃铣刀 |
(MILLING CUTTERS WITH HARDMETAL INDEXABLE INSERTS. SIDE AND FACE MILLING CUTTERS.) |
| NF E66-265-1994 |
有直柄的固体硬质合金端铣刀的尺寸 |
(SOLID HARDMETAL END MILLS WITH PARALLEL SHANK. DIMENSIONS.) |
| NF E66-266-1-1998 |
铣刀.名称.第1部分:实心或焊齿带柄端铣刀 |
(MILLING CUTTERS. DESIGNATION. PART 1 : SHANK TYPE END MILLS OF SOLID OR TIPPED DESIGN.) |
| NF E66-266-2-1998 |
铣刀.名称.第2部分:带可分度镶嵌刀片的柄式铣刀和带孔铣刀 |
(MILLING CUTTERS. DESIGNATION. PART 2 : SHANK TYPE AND BORE TYPE MILLING CUTTERS WITH INDEXABLE INSERTS.) |
| NF E66-270-2001 |
高速切削机床用铣刀.安全要求 |
(Milling cutters for high speed machining - Safety requirements.) |
| NF E66-303-2000 |
车刀和刨刀柄.选择形状和尺寸 |
(Shanks for turning and planning tools - Shapes and dimensions of the section.) |
| NF E66-305-1969 |
车刀的金属碳化物刀片 |
(CARBIDE TIPS FOR TURNING TOOLS.) |
| NF E66-308-1998 |
有圆柱形固定孔和圆角的可转位硬质合金刀片.尺寸 |
(Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions.) |
| NF E66-310-1991 |
刀具用活动刀片.名称 |
(Indexable inserts for cutting tools. Designation.) |
| NF E66-310/A1-2002 |
切削刀具用可转位刀片.命名.V型刀片的d和 m公差 |
(Indexable inserts for cutting tools - Designation - Tolerance of d and m of V-shape inserts.) |
| NF E66-311-1995 |
可转位刀片的车刀和仿形刀刀柄和刀片座.名称与牌号 |
(Turning and copying tool holders and cartridges for indexable inserts. Designation.) |
| NF E66-312-1995 |
配用于可转位刀片的镗杆(有柱形刀柄的刀具夹).名称和牌号 |
(Boring bars (tool holder with cyldindrical shank) for indexable inserts. Designation.) |
| NF E66-321-1984 |
自动机床用硬金属刀片 |
(Hardmetal inserts for tools for turning on automatic machines.) |
| NF E66-322-1984 |
车床工具.带硬金属钎焊刀片的自动车刀 |
(Turning tools. Tools with hardmetal inserts for turning on automatic machines.) |
| NF E66-327-1991 |
刀具用活动刀片.圆弧端陶瓷刀片.第1部分:无固定孔刀片的尺寸 |
(Indexable inserts for cutting tools. Ceramic inserts with rounded corners. Part 1 : dimensions of inserts without fixing hole.) |
| NF E66-328-1991 |
刀具用活动刀片.圆弧端陶瓷刀片.第2部分:有圆柱形固定孔的刀片尺寸 |
(INDEXABLE INSERTS FOR CUTTING TOOLS. CERAMIC INSERTS WITH ROUNDED CORNERS. PART 2 : DIMENSIONS OF INSERTS WITH CYLINDRICAL FIXING HOLE.) |
| NF E66-344-1999 |
带可转位刀片的车刀和仿形刀用单刃刀具夹头.尺寸 |
(Single-point tool holders for turning and copying, for indexable inserts. Dimensions.) |
| NF E66-345-1995 |
A型可转位刀片座.尺寸 |
(Cartridges, type A, for indexable inserts. Dimensions.) |
| NF E66-346-1999 |
装转位刀片用镗杆.尺寸 |
(Boring bars for indexable inserts. Dimensions.) |
| NF E66-350-1991 |
活动刀片钻.扁平圆柱手柄 |
(DRILLS WITH INDEXABLE INSERTS. CYLINDRICAL SHANKS WITH A PARALLEL FLAT.) |
| NF E66-363-1966 |
高速钢合金车床刀具.偏刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET SIDE TURNING TOOLS.) |
| NF E66-364-1966 |
高速钢合金车床刀具.倒角车刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET TURNING TOOLS FOR CORNER WORK.) |
| NF E66-365-1966 |
高速钢合金车床刀具.外圆车刀 |
(STRAIGTH TURNING TOOLS WITH HIGH SPEED TIPS.) |
| NF E66-366-1966 |
高速钢合金车床刀具.宽脸方头车刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. WIDE FACE SQUARE NOSE TURNING TOOLS.) |
| NF E66-367-1966 |
高速钢合金车床刀具.切槽刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. PARTING OFF TURNING TOOLS.) |
| NF E66-368-1966 |
高速钢合金车床刀具.切断车刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. CUTTING OFF TOOLS.) |
| NF E66-369-1966 |
高速钢合金车床刀具.车外螺纹刀具 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. EXTERNAL THREADING TOOLS.) |
| NF E66-370-1966 |
高速钢合金车床刀具.镗刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. BORING TOOLS.) |
| NF E66-371-1966 |
高速钢合金车床刀具.镗孔端面刀具 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL SIDE TURNING TOOLS.) |
| NF E66-372-1966 |
高速钢合金车床刀具.扩孔镗刀 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. RIGHT ANGLE PARTING OFF TURNING TOOLS.) |
| NF E66-373-1966 |
高速钢合金车床刀具.车内螺纹刀具 |
(TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL THREADING TOOLS.) |
| NF E66-380-1985 |
高速钢矫正棒.尺寸 |
(GROUND HIGH SPEED STEEL TOOL BITS. DIMENSIONS.) |
| NF E66-405-1983 |
空气锤工具的连接 |
(Shanks for pneumatic hammers.) |
| NF E66-500-1993 |
切削工具.高速钢组名称与符号 |
(Cutting tools. Designation of high speed steel groups.) |
| NF E66-502-1993 |
切削和研磨的基本量.第一部分:切削工具工作部分几何结构.一般术语:参照系统、工作角度、断屑台 |
(Basic quantities in cutting and grinding. Part 1 : geometry of the active part of cutting tools. General tems, reference systems, tool and working angles, chip breakers.) |
| NF E66-506-1985 |
加工和修整的基本数值.加工时几何和运动学数值 |
(Basic quantities in cutting and grinding. Geometric and kinematic quantities in cutting.) |
| NF E66-507-1985 |
加工和修整的基本数值.力、能量和功率 |
(Basic quantities in cutting and grinding. Forces, energy, power.) |
| NF E66-508-1991 |
切割和研磨的基本量.第5部分:使用砂轮研磨加工用的基本术语 |
(Basic quantities in cutting and grinding. Part 5 : basic terminology for grinding processes using grinding wheels.) |
| NF E66-510-1975 |
车床刀尖的圆弧半径 |
(Corner radius of single point cutting tools.) |
| NF E66-511-1989 |
铣刀寿命试验.第1部分:铣削平面 |
(TOOL LIFE TESTING IN MILLING. PART 1 : FACE MILLING.) |
| NF E66-512-1989 |
铣刀寿命试验.第2部分:端铣 |
(TOOL LIFE TESTING IN MILLING. PART 2 : END MILLING.) |
| NF E66-520-7-2000 |
切割工具的工作带.双工具材料.第7部分:对固态钻孔技术的应用 |
(Working zones of cutting tools - Couple tool-material - Part 7 : application to drilling technology on solid.) |
| NF E66-520-8-2000 |
切割工具的工作带.双工具材料.第8部分:在平面上钻孔的双工具材料方法学 |
(Working zones of cutting tools - Couple tool-material - Part 8 : couple tool-material methodology in drilling on plain.) |
| NF E66-531-1996 |
机床.工具手柄自动夹紧拔销 |
(Machine tools. Self-holding tapers for tool shanks.) |
| NF E66-532-1977 |
连接锥体.莫氏锥正传动 |
(POSITIVE DRIVE OF MORSE TAPERS.) |
| NF E66-533-1997 |
机床切削工具.莫氏锥度柄.带斜键的销槽 |
(Machine-tools. Morse taper shanks. Cotter slots with taper keys.) |
| NF E66-534-1970 |
莫氏锥式刀具转接套筒 |
(REDUCTION SLEEVES FOR MORSE TAPER TOOLS.) |
| NF E66-535-1969 |
莫氏锥式刀具用长套筒 |
(EXTENSION SOCKETS FOR TOOLS WITH MORSE TAPER SHANKS.) |
| NF E66-536-1969 |
钻床卡盘.机体和柄的连接 |
(DRILL CHUCK TAPERS.) |
| NF E66-537-1979 |
杆式圆柱柄刀具的伸长套筒 |
(SOCKETS FOR PARALLEL SHANK TOOLS WITH DRIVING TENONS.) |
| NF E66-540-1983 |
钻床卡盘.键型三爪卡盘.尺寸 |
(DRILL CHUCKS. KEY TYPE THREE-JAW CHUCK. DIMENSIONS.) |
| NF E66-541-1983 |
钻床卡盘.三爪盘用键.尺寸 |
(DRILL CHUCKS. KEYS FOR THREE-JAW CHUCK. DIMENSIONS.) |
| NF E66-542-1983 |
钻床卡盘.键型三爪卡盘.技术规范 |
(DRILL CHUCKS. KEY TYPE THREE. JAW CHUCK. TECHNICAL SPECIFICATIONS.) |
| NF E66-545-1983 |
钻床卡盘.无键自动紧固三爪卡盘.尺寸 |
(DRILL CHUCKS. THREE JAW,KEYLESS,SELF TIGHTENING CHUCK. DIMENSIONS.) |
| NF E66-546-1983 |
钻床卡盘.无键自动紧固三爪卡盘.技术规范 |
(DRILL CHUCKS. THREE-JAW,KEELESS,SELF TIGHTENING CHUCK. TECHNICAL SPECIFICATIONS.) |
| NF E66-550-1-1998 |
带圆柱柄的工具夹.第1部分:圆柱状柄,定位镗孔.技术交货条件 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 1 : CYLINDRICAL SHANK, LOCATION BORE. TECHNICAL DELIVERY CONDITIONS.) |
| NF E66-550-2-1998 |
带圆柱柄的工具夹.第2部分:A型,特殊设计的工具夹柄 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 2 : TYPE A, SHANKS FOR TOOL HOLDERS OF SPECIAL DESIGNS.) |
| NF E66-550-3-1998 |
带圆柱柄的工具夹.第3部分:B型带矩形放射状底座的工具夹 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 3 : TYPE B WITH RECTANGULAR RADIAL SEAT.) |
| NF E66-550-4-1998 |
带圆柱柄的工具夹.第4部分:C型带矩形轴状底座的工具夹 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 4 : TYPE C WITH RECTANGULAR AXIAL SEAT.) |
| NF E66-550-5-1998 |
带圆柱柄的工具夹.第5部分:带多于一个矩形底座的D型工具夹 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 5 : TYPE D WITH MORE THAN ONE RECTANGULAR SEAT.) |
| NF E66-550-6-1998 |
带圆柱柄的工具夹.第6部分:带圆柱状底座的E型工具夹 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 6 : TYPE E WITH CYLINDRICAL SEAT.) |
| NF E66-550-7-1998 |
带圆柱柄的工具夹.第6部分:带锥形底座的F型工具夹 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 7 : TYPE F WITH TAPER SEAT.) |
| NF E66-550-8-1998 |
带圆柱柄的工具夹.第8部分:Z型,附件 |
(TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 8 : TYPE Z, ACCESSORIES.) |
| NF E66-551-1968 |
车床用刀架 |
(LATHE TOOL POSTS.) |
| NF E66-611-1983 |
内面拉削刀具.前挂钩.形状和尺寸 |
(Internal broaching tools. Pull ends.) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com